English dropdown-ico

Manual SMC Networks SMC7003USB

70 pages 1.3 mb
Download

Go to site of 70

Summary
  • SMC Networks SMC7003USB - page 1

    EZ Connect ADSL USB Modem ◆ High-speed Internet access ov er existing phone lines ◆ One RJ-11 ADSL port ◆ Deli vers USB plug-and-play installation ◆ Supports full-rate DMT connection (8 Mbps do wnstream, 1 Mbps upstream) ◆ Supports economical G.lite connection (1.5 Mbps do wnstream, 512 Kbps upstream) ◆ Graphic interface for ADSL connec ...

  • SMC Networks SMC7003USB - page 2

    ...

  • SMC Networks SMC7003USB - page 3

    38 T esla Irvine, CA 92618 Phone: (949) 679 -8000 April 2003 Pub. # 150000039500A R01 From SMC’ s EZ Connect line of feat ure-rich SOHO solutions EZ Connect ADSL USB Modem User Guide ...

  • SMC Networks SMC7003USB - page 4

    Infor mation furnis hed by SMC Networks , Inc. (SMC) is believed to be accurate and reliab le. How ever, no responsibility is assumed by SMC for its use, nor for any infri ngements of p atents or other rights of third parties which ma y result from its use . No license is granted by implication o r otherwise under any patent or patent rights of SMC ...

  • SMC Networks SMC7003USB - page 5

    i L IMITED W ARRANTY Limited W ar ranty Statement: SMC Net works , Inc. (“SMC”) warrants its products to be free from defects in workmanship and materials , under nor mal use and ser vice, for the applicable warranty ter m. All SMC products carr y a standard 90 -day limited warranty from the date of purchase from SMC or its Authorized Reseller ...

  • SMC Networks SMC7003USB - page 6

    L IMITED W AR RANTY ii WARRANTIES EX CLUSIVE: IF AN SMC PRODUCT DOES NOT OPERA TE AS W ARRANTED ABO VE, CUSTOMER’S SOLE REMEDY SHALL BE REP AIR OR REPLA CEMENT OF THE PRODUCT IN QUESTION , AT SMC’S OPTION . THE FOREGOING W ARRANTIES AND REMEDIES ARE EX CLUSIVE AND ARE IN LIEU OF ALL OTHER W ARRANTIES OR CONDITIONS , EXPRESS OR IMPLIED , EITHER ...

  • SMC Networks SMC7003USB - page 7

    iii C OMPLIANCES FCC - Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to P ar t 15 of the FCC Rules . These limits are designed to provide reasonable protection against har mf ul interference in a residential installation. T his equipment generates, uses and can radiate radio freque ...

  • SMC Networks SMC7003USB - page 8

    C OMPLIANCES iv Items (b) and (d) are indicated on the label. The Ringer Equivalence Number (REN) is used to deter mine how many devices can be connected to your telephone line. In most areas , the sum of the REN of all the devices on any one line should not exceed 5.0. If too many devices are attached, they may not ring properly . Industr y Canada ...

  • SMC Networks SMC7003USB - page 9

    EC C ONFORM ANCE D ECLARATION - C LASS B v EC Confor mance Declaration - Class B SMC contact for these products in Europe is: SMC Networks Europe, Edificio Conata II , Calle Fructuós Gelabert 6-8, 2 o , 4 a , 08970 - Sant Joan De spí, Barcelona, Spain. This infor mation technolog y equipment complies with the requirements of the Council Directiv ...

  • SMC Networks SMC7003USB - page 10

    C OMPLIANCES vi Industr y Canada - Class B This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled “Digi tal Apparatus ,” ICES-003 of the Department of Communications . Cet appareil numérique respecte les limites de br uits rad ...

  • SMC Networks SMC7003USB - page 11

    S AFETY C OMPLIANCE vii 11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten Sie es v om Stromnetz trennen. Somit wird im F alle einer Überspannung eine Besc hädigung vermieden. 12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder Flüssigkeiten in das Gerät gelang en. Dies könnte einen Brand bzw . elektrisc ...

  • SMC Networks SMC7003USB - page 12

    C OMPLIANCES viii ...

  • SMC Networks SMC7003USB - page 13

    ix T ABLE OF C ONTENTS 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Key Feature s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 2 Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Package Contents . . . . . . . . . . . . . . . . . ...

  • SMC Networks SMC7003USB - page 14

    T ABLE OF C ONTENTS x 6 Upgrading the Modem Software . . . . . . . . . . . . . . . . . 6-1 A Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 You Cannot Connect to the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 You Cannot Connect to the Internet . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • SMC Networks SMC7003USB - page 15

    1-1 C HAPTER 1 I NTRODUCTION The EZ Connect ADSL USB Modem (SMC7003USB V .2) provides high-speed Internet access ov er existing phone lines by making use of previously unused frequency bandwidth above the v oice band. By placing ADSL (Asymmetric Digital Subscriber Line) signals above the frequency of the v oice signal, ADSL se r vice can coexist on ...

  • SMC Networks SMC7003USB - page 16

    I NTR ODUCTION 1-2 This plug-in ADSL modem provides an alwa ys-on digital connection that eliminates dial-up delays , and transparent reconnection when initiating any network reques t. Full suppor t for the A TM protocol also provides access to a wide range of advanced transp or t features , including support for real-time video, and other multimed ...

  • SMC Networks SMC7003USB - page 17

    K EY F EATURES 1-3 Key Features • High-speed Internet access over existing phone lines • Full-rate DMT connection (8 Mbps downstream, 1 Mbps upstream) and economical G.lite connection (1.5 Mbps downstream, 512 K bps upstream) • Multiprotocol encapsulation of all network protocols, including TCP/IP, Novell’s IPX, and Windows NetBEUI for comp ...

  • SMC Networks SMC7003USB - page 18

    I NTR ODUCTION 1-4 ...

  • SMC Networks SMC7003USB - page 19

    2-1 C HAPTER 2 H ARDWARE I NSTALLATION Before installing the SMC ADSL USB M odem verify that you ha ve all the items listed under “P ackag e Contents .” If any of the items are missing or damaged, contact your local SMC distributor . Also be sure you hav e all the necessar y cabling before installing the modem. Package Contents After unpacking ...

  • SMC Networks SMC7003USB - page 20

    H ARDWARE I NSTALLA TION 2-2 Hardware Description Setting up the EZ Connect ADSL USB Modem involv es connecting the device’ s cables and installing the driv er software. Note that Windows 98, 98SE, 2000, XP , or Macintosh 9.x should already be installed on the computer before installing the driv er software. The following figure shows the compone ...

  • SMC Networks SMC7003USB - page 21

    H ARDWARE D ESCRIPTION 2-3 LED Indicators The EZ Connect ADSL USB Modem has two LEDs on the top panel, one is marked “Data” and the other “Power.” The operational status of the modem is indicated by the LED conditions listed below . Power Requirements USB devices can be either self-powered or bus-pow ere d. A device which has no pow er conn ...

  • SMC Networks SMC7003USB - page 22

    H ARDWARE I NSTALLA TION 2-4 System Requirements The EZ Connect ADSL USB Modem requires the following PC features to operate: • A host PC that supports the Univers al Serial Bus • 32 MB of RAM and 10 MB of hard disk space • Windows 98, 98SE, 2000, XP, or Macintosh 9.x • Standard telephone cable with RJ-11 plugs Note: To share Internet acces ...

  • SMC Networks SMC7003USB - page 23

    C ONNECTING THE S YSTEM 2-5 Connecting the System Phone Line Configuration The EZ Connect ADSL USB Modem supports dual-mode operation for both full-rate G .dmt and economical G .lite. Y our ser vice provider will attach the outside ADSL line to a data/phone splitter . Y ou can then connect your phones and computer directly to the splitter as sho wn ...

  • SMC Networks SMC7003USB - page 24

    H ARDWARE I NSTALLA TION 2-6 ...

  • SMC Networks SMC7003USB - page 25

    3-1 C HAPTER 3 D RIVER I NSTALLATION The CD supplied with the package contains the software drivers a vailable for the EZ Connect ADSL USB Modem. Note: DO NOT plug th e device to your comput er directly before d river installation. Follow the instructions to install the driver and connect the modem properly. This modem is fully software upg radeabl ...

  • SMC Networks SMC7003USB - page 26

    D RIVER I NSTALLATION 3-2 Windows 98/98SE/2000/XP Y ou may find that the instructions here do not exactly match your v ersion of Windows . T his is because these ste ps and screenshots were created from Windows 2000. The installation of Windows 98, 98SE and XP are similar , but not identical, to Windows 2000. F ollow the instr uctions below to begi ...

  • SMC Networks SMC7003USB - page 27

    W INDOWS 98/98SE/2000/XP 3-3 3. The W elcome screen will open. Click Next to continue. 4. After viewing the license ag reement, c lick Accept. ...

  • SMC Networks SMC7003USB - page 28

    D RIVER I NSTALLATION 3-4 5. During installation, the system will display a screen to ask you to plug in the mode m. Plug in the de vice now. Note: Connect the SMC7003USB V.2 to the computer using the supplied USB cable. Insert the rectangular end (Type-A) of the USB cable into the USB port of your PC. Insert the square end (Type-B) of the cable in ...

  • SMC Networks SMC7003USB - page 29

    W INDOWS 98/98SE/2000/XP 3-5 7. After your computer restarts , the “Finished” screen will appear to indicate successful completion of the installation process . Click Finish. Note: Regardless of the driver type installed, the installation procedure will automatically configure the TCP/IP settings to acquire IP addressing information from the se ...

  • SMC Networks SMC7003USB - page 30

    D RIVER I NSTALLATION 3-6 Macintosh 9.x 1. Start up your PC with the modem connected. 2. Insert the CD-ROM that comes with the EZ Connect ADSL USB Modem into your CD driv e. 3. Select the language version you w ant to install, and double-click to open the chosen folder . 4. Double-click Installer to start driver installation. ...

  • SMC Networks SMC7003USB - page 31

    M ACINTOSH 9. X 3-7 5. The W elcome screen w ill appear as shown on below; click Continue . 6. Select the location to install the software, and click Select. ...

  • SMC Networks SMC7003USB - page 32

    D RIVER I NSTALLATION 3-8 7. Click Start to continue . 8. Click Quit to finish driver installation. ...

  • SMC Networks SMC7003USB - page 33

    M ACINTOSH 9. X 3-9 Uninstallation in Macintosh 9.x 1. If you w ant to uninstall the driv er and SMC7003USB control panel, insert the CD-ROM that comes with the modem into your CD drive . Then re peat step 3 to step 6 in the previous section. 2. Choose Customized R emoval and click Start to continue. 3. Select All and click OK. ...

  • SMC Networks SMC7003USB - page 34

    D RIVER I NSTALLATION 3-10 4. Click Quit to close the windo w . ...

  • SMC Networks SMC7003USB - page 35

    4-1 C HAPTER 4 TCP/IP N ETWORKING O PTIONS Microsoft Windows 98/98SE TCP/IP settings are automatically set up during the software installation process . The following procedure may be used to change TCP/IP settings , if necessar y . 1. From your PC desktop , double-click the My Computer icon. 2. From the My Computer windo w , double-click the Dial- ...

  • SMC Networks SMC7003USB - page 36

    TCP/IP N ETWORKING O PTIONS 4-2 4. From the Ser ver T ypes tab of the SMC Dial-Up PPP Connection window , select the TCP/IP checkbo x and click TCP/IP Settings . ...

  • SMC Networks SMC7003USB - page 37

    M ICR OSOFT W INDOWS 98/98SE 4-3 5. The TC P/IP Settings wind ow will appear for you to modify the IP address, Name Server addresses and/or default g ateway . Note: Please fill in the information provided by your Internet Service Provider on the above screen. 6. Click OK. 7. The SMC Dial-Up PPP Connection window will reappear. Clic k OK to close t ...

  • SMC Networks SMC7003USB - page 38

    TCP/IP N ETWORKING O PTIONS 4-4 Microsoft Windows 2000 TCP/IP settings are automatically se t up during the software installation process . The following procedure may be used to change TCP/IP settings , if necessar y . 1. From y our PC desktop , click Start/Settings/Network and Dial-Up Connections . 2. From the Netw ork and Dial-Up Connections win ...

  • SMC Networks SMC7003USB - page 39

    M ICR OSOFT W INDOWS 98/98SE 4-5 3. From the Netw orking tab of the SMC Dial-Up PPP Connection Properties window , select Internet Protocol (TCP/IP) and click Properties. ...

  • SMC Networks SMC7003USB - page 40

    TCP/IP N ETWORKING O PTIONS 4-6 4. The Inter net Protocol (TCP/IP) Properties window will appear for you to modi fy the IP address and DNS Ser ve r addresses . Note: Please fill in the information provided by your Internet Service Provider on the above screen. 5. Click OK. 6. The SMC Dial-Up PPP Connection Proper ties window will reappear . Click O ...

  • SMC Networks SMC7003USB - page 41

    M ICR OSOFT W INDOWS XP 4-7 Microsoft Windows XP TCP/IP settings are automatically set up during the software installation process . The following procedure may be used to change TCP/IP settings , if necessar y . 1. Click Start/Control Panel. 2. Click Netw ork and Internet Connections. 3. The Network Connections window will open as shown abov e. Do ...

  • SMC Networks SMC7003USB - page 42

    TCP/IP N ETWORKING O PTIONS 4-8 4. Double-click Internet Protocol (TCP/IP). 5. Fill in the information provided by your Internet Service Provider. Use the spaces on the next page to record the TCP/IP settings . ...

  • SMC Networks SMC7003USB - page 43

    M ICR OSOFT W INDOWS XP 4-9 6. Select “Obtain an IP address automatically” and “Obtain DNS ser ver address automatically . ” Click OK or Close to close each window . Obtain IP Settings from Your Modem Now that you ha ve configured your computer to connect to your modem, it needs to obtain new netw ork settings . By releasing old DHCP IP set ...

  • SMC Networks SMC7003USB - page 44

    TCP/IP N ETWORKING O PTIONS 4-10 2. In the Command Prompt windo w , type “IPCONFIG /RELEASE” and press the ENTER key . 3. T ype “IPCONFIG /RENEW” and press the ENTER key . V erify that your IP Address is now 192.100.100.xxx (where x is 1 - 14, 16 - 254), your Subnet Mask is 255.255.255.0 and your Def ault Gatewa y is 192.100.100.15 . T hese ...

  • SMC Networks SMC7003USB - page 45

    M ACINTOSH C ONFIGURATION 4-11 Macintosh Configuration The following instr uctions will help you to get your network configuration infor mation. Note: Your local ISP will configure your network to the following settings. If there is any problem with these functions, please contact your local ISP for help. ADSL Setup 1. Pull down the Apple Menu. 2. ...

  • SMC Networks SMC7003USB - page 46

    TCP/IP N ETWORKING O PTIONS 4-12 3. Mov e the cursor onto the SMC ADSL USB Modem window , and press the “Ctrl” - “1” k eys on your keyboard. 4. The Configuration, ATM, and DSL Adv anced infor mation fields will appear as shown belo w . 5. Click the button in the top left corner to clos e this ADSL Setup window . ...

  • SMC Networks SMC7003USB - page 47

    M ACINTOSH C ONFIGURATION 4-13 TCP/IP 1. Pull down the Apple Men u. Select Control P anels/TCP/IP to view your TCP/IP information. 2. On the TCP/IP window , make sure “PPP” is selected in the Connect via: field, and “Using PPP Ser ver” is already selected in the Configure field. 3. Click the button in the top left corner to close the TCP/IP ...

  • SMC Networks SMC7003USB - page 48

    TCP/IP N ETWORKING O PTIONS 4-14 ...

  • SMC Networks SMC7003USB - page 49

    5-1 C HAPTER 5 C OMMUNICATION S ETTINGS Dial-Up PPP Connection Once the SMC ADSL USB Modem and software hav e been installed, the SMC Dial-Up PPP Connection icon will appear on your desktop . To connect to Internet, double-click the short-cut icon. Fill in the User name and Password (which should provided by your Internet Service Provider). Click D ...

  • SMC Networks SMC7003USB - page 50

    C OMMUNICATION S ETTINGS 5-2 Connection Information The EZ Connect ADSL USB Modem control panel prog ram provides a quick and easy wa y to configure and chec k the perfor mance of the modem and ADSL connection. When open, the monitor window is updated every two seconds . 1. On the desktop , click Start/Settings/Control P anel. 2. From the Control P ...

  • SMC Networks SMC7003USB - page 51

    C ONNECTION I NFOR MATION 5-3 Physical Link The Physical Link scr een allows you to review the current state of the EZ Connect ADSL USB Modem and connection. When th e green indicator is on in the Link Status field, it indicates that a connection has been made. This indicator blinks while a connection is being established. The Transmitting and Rece ...

  • SMC Networks SMC7003USB - page 52

    C OMMUNICATION S ETTINGS 5-4 System Information The System Infor m ation screen displays the release number of the EZ Connect ADSL USB Modem driv er, the firmware release number, and the control panel version that you are currently using . ...

  • SMC Networks SMC7003USB - page 53

    C ONNECTION I NFOR MATION 5-5 Configuration The Configurati on screen displays the modulation settings applicable to your dri ver . If you need to configure further settings , launch the Comm unication Settings window b y clicking Start/Prog rams/SMC DSL Modem/ Configure . ...

  • SMC Networks SMC7003USB - page 54

    C OMMUNICATION S ETTINGS 5-6 The Communication Settings wind ow allo ws you to selec t the Encapsulation type of PPP oATM or PPP oE connection, and the modulation settings . • Encapsulation (Default: RFC 2364 PPPoATM LLC Encapsulation) • Modulation (Default: Multimode) ...

  • SMC Networks SMC7003USB - page 55

    6-1 C HAPTER 6 U PGRADING THE M ODEM S OFTWARE Updating to a new v ersion of the software requires remov al of the cur rently installed version. F ollow the instr uctions below to uninstall the cur rent driv er version, then go to “Driv er Installation” on page 3-1 to install the updated driv er. Note: DO NOT unplug the USB cable from your comp ...

  • SMC Networks SMC7003USB - page 56

    U PGRADING THE M ODEM S OFTWARE 6-2 2. The Infor m ation window will be displayed reminding y ou not to unplug the USB cable until the uninstall process has been completed. Click OK to contin ue. 3. A message wi ll display in dicating that you ca n unplug the device . Remove the modem connection now. Then click OK. ...

  • SMC Networks SMC7003USB - page 57

    U PGRADING THE M ODEM S OFTWAR E 6-3 4. The Setup Complete window indicates successful completion of the uninstall process . Click Finish to reboot your computer . 5. After you r computer restar ts , g o to “Dri ver Installation” on pa g e 3-1 for infor mation on driv er installations . ...

  • SMC Networks SMC7003USB - page 58

    U PGRADING THE M ODEM S OFTWARE 6-4 ...

  • SMC Networks SMC7003USB - page 59

    A-1 A PPENDI X A T ROUBLESHOOTING Check the follo wing troubleshooting points before contacting SMC T echnical Suppor t. You Cannot Connect to the Network • Check the phone and USB cables for wear or loose wires and replace any defective cables if necessary. Make sure the cable is securely attached to the modem’s RJ-11 port and that the modem i ...

  • SMC Networks SMC7003USB - page 60

    T R OUBLESHOOTING A-2 ...

  • SMC Networks SMC7003USB - page 61

    B-1 A PPENDIX B S PECIFICATIONS ADSL Specifications Standards Confor mance Basic ADSL: ANSI T1.413 Issue II (full rate ADSL), I TU G .992.1 (G .dmt), ITU G .992.2 (G .lite), G .994.1 (G .handshake) T ranspor t Protocols: RFC 1557 (IP/A TM), RFC 2364 (PPP/ATM) AT M A t tr i bu te s : ATM Transmission Convergence, ATM Framing (with traffic shaping), ...

  • SMC Networks SMC7003USB - page 62

    S PECIFICATIONS B-2 Media Connection USB cable connection to PC -90-ohm shielded USB cable , max length 5 m (16 ft) RJ-11 phone wire connection to ADSL provider PC Requirements Host Interface: USB Specification 1.1 or up System Re quirements: A PC and Windows 98, 98SE, 2000, XP, or Mac OS 9.x Physical Characteristics Por ts Upstream: 1 USB Type-B U ...

  • SMC Networks SMC7003USB - page 63

    S PECIFICATIONS B-3 Te m p e r a t u r e Operating 0 to 40 °C (32 to 104 °F) Storage -40 to 70 °C (-40 to 160 °F) Humidity 5% to 95% (non-condensing) Compliances CE Mark Emissions FCC Class B V CCI Class B Industr y Canada Class B EN55022 (CISPR 22) Class B C-Tick - AS/NZS 3548 (1995) Class B Immunity IEC 1000-4-2/3/4/6 Safety UL 60950 EN60950 ...

  • SMC Networks SMC7003USB - page 64

    S PECIFICATIONS B-4 ...

  • SMC Networks SMC7003USB - page 65

    Glossary-1 G LOSSARY Asymmetric Digital Subscriber Line (ADSL) One of four DSL techno logies. ADSL is designed to deliv er more bandwidth do wnstream (from the central office to the customer site) than upstream. Downstre am rates rang e from 1.5 to 9 Mbps, whereas upstream bandwidth ranges from 16 to 640 Kbps. ADSL transmissions w ork at distances ...

  • SMC Networks SMC7003USB - page 66

    G LOSSAR Y Glossary-2 Dynamic Host Configuration Protocol (DHCP) Issues IP addresses automatically within a specified range to de vices such as PCs when they are first powered on. The device retains the use of the IP address for a specific license period that the system administrator can define. DHCP is available as part of the many operating syste ...

  • SMC Networks SMC7003USB - page 67

    G LOSSAR Y Glossary-3 IEEE 802.3u Defines CSMA/CD access method and ph ysical layer specifications for 100B ASE-TX Fast Ethernet. Internet Service Provider (ISP) A company that pro vides access to the Internet. This may be your local telephone company , or a dedicated Internet ser vice company . Local Area Network (LAN) A group of interconnected co ...

  • SMC Networks SMC7003USB - page 68

    G LOSSAR Y Glossary-4 RJ-45 Connector A connector for twisted-pair wiring . Splitter A hardware device used in G .dmt to split the data and voice traffic before passing it on to the netw ork and phone system. Transmission Control Protocol/Internet Protocol (TCP/IP) Protocol suite that includes TCP as the primar y transport protocol, and IP as the n ...

  • SMC Networks SMC7003USB - page 69

    ...

  • SMC Networks SMC7003USB - page 70

    38 T esla Irvine, CA 92618 Phone: (949) 679-8 000 FOR TECHNICAL SUPPOR T , CALL: From U.S.A. and Canada (2 4 hours a day , 7 days a week) (800) SMC-4-Y OU; (949) 679-8000; F ax: (949) 679-1481 From Europe (8:00 AM - 5:30 PM UK T ime) 44 (0) 118 974 8700; Fax: 44 (0) 118 97 4 8701 INTERNET E-mail addresses: techsupport@smc.com european.techsupp ort@ ...

Manufacturer SMC Networks Category Network Router

Documents that we receive from a manufacturer of a SMC Networks SMC7003USB can be divided into several groups. They are, among others:
- SMC Networks technical drawings
- SMC7003USB manuals
- SMC Networks product data sheets
- information booklets
- or energy labels SMC Networks SMC7003USB
All of them are important, but the most important information from the point of view of use of the device are in the user manual SMC Networks SMC7003USB.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals SMC Networks SMC7003USB, service manual, brief instructions and user manuals SMC Networks SMC7003USB. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product SMC Networks SMC7003USB.

Similar manuals

A complete manual for the device SMC Networks SMC7003USB, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use SMC Networks SMC7003USB by users. Manuals are usually written by a technical writer, but in a language understandable to all users of SMC Networks SMC7003USB.

A complete SMC Networks manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual SMC Networks SMC7003USB - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the SMC Networks SMC7003USB, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the SMC Networks SMC7003USB, that we can find in the current document
3. Tips how to use the basic functions of the device SMC Networks SMC7003USB - which should help us in our first steps of using SMC Networks SMC7003USB
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with SMC Networks SMC7003USB
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of SMC Networks SMC7003USB in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning SMC Networks SMC7003USB?

Use the form below

If you did not solve your problem by using a manual SMC Networks SMC7003USB, ask a question using the form below. If a user had a similar problem with SMC Networks SMC7003USB it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)