English dropdown-ico

Manual Speco Technologies PC Pro Series

136 pages 6.26 mb
Download

Go to site of 136

Summary
  • Speco Technologies PC Pro Series - page 1

    PC Pro Series User Manual ...

  • Speco Technologies PC Pro Series - page 2

    P/N: 300AC2F A-CPM MADE IN T AIWAN ...

  • Speco Technologies PC Pro Series - page 3

    FCC NOTICE (Class A) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device ma y not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Federal Communications Co mmissio n Statement NOTE- ...

  • Speco Technologies PC Pro Series - page 4

    THE MARK OF CROSSED-OUT WHEELED BIN INDICA TES THA T THIS PRODUCT MUST NOT BE DISPOSED OF WITH Y OUR OTHER HOUSEHO LD W ASTE. INSTEAD, YOU NEED TO DISPOSE OF THE W ASTE EQUIPMENT BY HANDING IT OVER TO A DESIGNA TED COLLECTI ON POINT FOR THE RECYCLING OF W ASTE ELECTRICAL AND ELECTRON IC EQUIPMENT . FOR MORE INFORMA TION ABOUT WHERE TO DROP OFF YOUR ...

  • Speco Technologies PC Pro Series - page 5

    WA R N I N G TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EX POSE THIS APPLIANCE TO RAIN OR MOISTURE . CAUTION IF THERE IS ANY DAMAGE, SHORTAGE OR INAPPROPRIATE ITEM IN THE PACKAGE, PLEASE CONTACT WITH YOUR LOCAL DEALER. WARRANTY VOID FOR ANY UNAUT HORIZED PRODUCT MODIFI CATION. Manual Conventions The following conventions are used throughout t ...

  • Speco Technologies PC Pro Series - page 6

    T ABLE OF CONTENTS Chapter 1 Introducti on ....................................................................... 1 1.1 Package Co ntents .................................................................................. 1 1.2 S pecific ation ........................................................................................... 2 1.3 Software ...

  • Speco Technologies PC Pro Series - page 7

    4.5.1 Set schedule at specific portion of time .................................. 59 4.6 Backup Setting ..................................................................................... 59 4.6.1 T o Ba ckup f ile .......................................................................... 59 4.6.2 Setup Qu ick Backup.............................. ...

  • Speco Technologies PC Pro Series - page 8

    Chapter 8 Image V erifi cation ......................................................... 105 8.1 T o Run the ImageV er ification pr ogram ............................................... 105 Chapter 9 iEnhanc e ........................................................................ 106 9.1 T o Use iS tabl e ......................................... ...

  • Speco Technologies PC Pro Series - page 9

    1 Chapter 1 Introduction The SPECO PC Pro is a professional series of standalone DVR units that provide up to 16 channels of hybrid and real-time monitoring and di gital recording of surveillance video. It can connect to 4 sensors and relays and also provide up to 16 audio input s. No software and hardware installation required. Simply connect the ...

  • Speco Technologies PC Pro Series - page 10

    2 1.2 Specification PC Pro Series Model PC Pro 16 PC Pro 8 Operating system WinXP embedded Video input 16 8 Video loop output 16 8 Display rate(NTSC/PAL) 480/400 fps 240/200 fps Recording frame rate(CIF) 480 (FPS@352*240) 240 (FPS@352*240) Audio input 16 8 Sensor/Relay 4/4 4/4 DVD-RW Yes Yes Removable HDD tray 1 HDD tray(support up to 4 HDD) DOM 2 ...

  • Speco Technologies PC Pro Series - page 11

    3 1.3 Sof tware Features Recording Modes Continuous Recording Smart Recording Motion Recording Voice detection Recording Alarm Recording Manual Recording i All modes can be triggered by schedule De-interlace Options Optimize for dynamic or static camera scenes Dual-monitor output Support Dual Monitor environment for independent preview and playback ...

  • Speco Technologies PC Pro Series - page 12

    4 Make a phone call Send files to FTP SMS and MMS PTZ preset point tracking Alarm SOP wizard Enlarge camera view (Full screen) Central Management Central Manage ment System(CMS) Remote Access IE browser Remote Console Smart phone viewer PDA viewer Dispatch Server Share transmission loading; enabl e more clients remote access and high-speed data tra ...

  • Speco Technologies PC Pro Series - page 13

    5 1.4 Front Panel (1) (3) (4) (5) (8) (9) (7) (10)(1 1) (12) (13) (18) (17) (16) (15) (14) (6) (19) (20) (2) Name Function (1) USB 2.0 port 2 x USB 2.0 ports for connecting any USB interface devices, ex: USB pen drive, external hard disk, keyboard, mouse…and so on. (2) IR Sensor Receive signal from the remote control to operate the unit (3) IR Se ...

  • Speco Technologies PC Pro Series - page 14

    6 Name Function (5) + 9 : T o freeze the live preview video screen. T o unfreeze press 9 again. User can snapshot the freeze screen while freezing. + 10 : T o backup recorded video file to pe n drive(see Chapter 4.6.2 ) + 11 : Allow user to set a video segment from A to B point and play on the surveillance screen until user stop. 1. Switch to Playb ...

  • Speco Technologies PC Pro Series - page 15

    7 Name Function (6) Number button 1 ~ 12 - With button can switch to different screen display modes and enable auto scan function - T o call out 1~ 8 map figures in E-map mode (7) LCD Displa y Display DVR system status such as temperature and opearate status (8) Confirm or make a selection (9) T o start recording video (10) T o enable network conne ...

  • Speco Technologies PC Pro Series - page 16

    8 Name Function (18) Auto Pan T o enable auto pan function system status indicators: : System power indicator . Indicate running state of system. Lights when the system is running. : Removable hard disk indicator . Indicate running state of the hard disk. Lights when the HDD is running : Recording status indicator . Lights when the system is record ...

  • Speco Technologies PC Pro Series - page 17

    9 1.4.1 The Front Panel Control Buttons in Guest Mode When user uses Guest account to operate DVR serv er, the front p anel control buttons of DVR are limited to preview and playback function only . The following table lists the control buttons that are available while in Guest mode. i In the Guest mode, user only can use remote controller and fron ...

  • Speco Technologies PC Pro Series - page 18

    10 1.5 Back Panel 1.5.1 8 Channels 1 2 3 4 5 6 7 8 1 2 3 4 5 7 8 12345678 + - + - + - + - + - + - + - + - AUDIO IN TV OUT DUA L-VGA OU T SEN SOR I N RELA Y OUT G 123412 34 GGG1 2 3 4 2 1 N / A N / A N / A N / A (2) (1) (3) (4) (10) (9) (8) (7) (6) (5) 6 Name Function (1) Video Loop Out Output the video signal to a CCTV monitor. Only output one chan ...

  • Speco Technologies PC Pro Series - page 19

    11 1.5.2 16 Channels 12345678 9 10 11 12 13 14 15 16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - AUDIO IN TV OUT DUAL-V GA OUT VID EO LOOP OU T SENSO R IN RELAY O UT G 123412 34 GGG1 2 3 4 2 1 2 1 N / A N / A N / A N / A VIDEO IN (1) (2) (3) (10) (9) (8) (7) (6) (5) (4) Name Function (1) CH ...

  • Speco Technologies PC Pro Series - page 20

    12 Chapter 2 Hardware Inst allation 2.1 Connecting Device The DVR unit can connect up to 16 video cameras, 4 sensor devices, 4 relay devices and output video to a TV or CRT/LCD monitor . Connecting the unit to a DVD-RW/ external hard disk through USB connection, the bundled software enables you to transfer and back up the recorded video. Also, the ...

  • Speco Technologies PC Pro Series - page 21

    13 2.2 Remote Controller Buttons (1) (3) (6) (8) (11) (13) (16) (2) (4) (5) (7) (9) (12) (10) (14) (15) (17) (18) Name Functio n (1) Switch to playback mode, preview mode or E-map mode (2) T o reset alarm status (3) T o select the time and date of playback file Fast play the video playback at the speed of 2x, 4x, 8x, 16x or 32x (4) Decrease the vid ...

  • Speco Technologies PC Pro Series - page 22

    14 Name Functio n T o move the selection to the right (7) T o move the PTZ camera lens to the right T o zoom out view of PTZ camera (8) T o zoom in view of PTZ camera T o speed up movement of PTZ camera lens (9) T o speed down movement of PTZ camera lens T o focus in PTZ camera lens (10) T o focus out PTZ camera lens (11) T o enable auto pan functi ...

  • Speco Technologies PC Pro Series - page 23

    15 Name Functio n (16) ~ A functional key for multiple system control - Press and function button to enable functions + :Sw itch to single screen display mode + : Switch to QUAD display mode + : Sw itch to 9 spilt screen display mode + : Switch to 16 spilt screen display mode + : Switch to one single and 7 spilt screen display mode + : Switch to on ...

  • Speco Technologies PC Pro Series - page 24

    16 Name Functio n (16) + : Allow user to set a video segment from A to B point and pla y on the surveillance screen until user stop. 1. Switch to Playback mode 2. Press to enter multiple function mode 3. During the playback, press to set the A point of video segment. User will see a triangle mark on play progress bar . 4. And then, press again to s ...

  • Speco Technologies PC Pro Series - page 25

    17 2.2.1 The Remote Controller Buttons in Guest Mo de When user uses Guest account to operate DVR serv er , the front panel control buttons of DVR are limited to preview and playback function only . The following table lists the control buttons that are available while in Guest mode. i In the Guest mode, user onl y can use remote contr oller and fr ...

  • Speco Technologies PC Pro Series - page 26

    18 2.3 Sensor/Relay Interface pinhole allocation The I/O inteface enables you to connect (4) sens or inputs and (4) relay outputs. Just connect the external sensor and relay pin directly to the I/ O interface pinhole. Check the table below and locate which pinhole is assigned to s ensor input and relay output. SE N S O R I N REL A Y O U T 1G G G G ...

  • Speco Technologies PC Pro Series - page 27

    19 2.4 Audio In Interface pinhole allocation The audio in interface enables you to connect 16 audio in devices such as microphone. Just connect the external audio in devic e pin directly to the audio in pinhole. Check the figure below and locate which pinhole is assigned. 8Cahnnels 123 45 678 + - + - + - + - + - + - + - + - AU D I O IN 16 Channels ...

  • Speco Technologies PC Pro Series - page 28

    20 Chapter 3 Using the DVR Sof tware 3.1 Running the Unit for the First Time When the unit is turned on for the first time, the s ystem will prompt you to enter the CD Key . The CD Key is a label on rear of the unit. i For the using DVR application ev ery time, us er onl y has the guest authority . Th e guest authority only can operate the partial ...

  • Speco Technologies PC Pro Series - page 29

    21 Name Function (1) Exit - Guest: Switch to the guest mode. In guest mode, user onl y can control DVR by using the remote controller (see also Chapter 2.2.1 ) and the control panel of DVR (see also Chapter 1.4.1 ). The functions are limited to preview and playback function only . For complete functions of DVR, please login as an administrator . - ...

  • Speco Technologies PC Pro Series - page 30

    22 Name Function (7) Setup When setting up the system for the first time, t ype the word “ admin ” in the Password text box to access. Click button to configure settings for cameras, recording, network, scheduler, backup, sensor s, relays, alarms and user authentication. (8) PTZ Click to pop-up a PTZ setup dialog to configure an appointed PTZ c ...

  • Speco Technologies PC Pro Series - page 31

    23 Name Function (16) Full screen Use the entire a rea of the screen to onl y display the video. T o return, press the right button of the mouse or ESC on the keyboard or click the arrow icon. When you switch to full screen in multiple-screen mode, Left click to toggle to only display one of the video screens in the multiple-screen mode or all. (17 ...

  • Speco Technologies PC Pro Series - page 32

    24 4. The events list which display on the screen can be saved as text file format. T o save the events list, click Save button. Using the POS Viewer T o view POS event log, click POS Vie w er bar to call out the POS event log window . (1) (2) (3) (4) (5) (6) Name Function (1) POSDB Path The storage path for POS event log. Click to change the stora ...

  • Speco Technologies PC Pro Series - page 33

    25 Using the Object Viewer Click Object Viewer bar to view and search FaceFinder event log. Name Function (1) Close Click to close Object Log Viewer windo ws (2) Search Mode Switch to face object log search mode (3) Select Camera Select the camera to view or select all to view all cameras (4) Clear T o clear all object log in Object Log list (5) Cl ...

  • Speco Technologies PC Pro Series - page 34

    26 3.3 Function Buttons in Playback Mode T o switch to Playback mode, click Playback button at the lower right corner of Advanced/Preview mode user interface (22) (21) (20) (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15) (16) (17) (18) (19) Name Function (1) Split Screen Mode Select from 6 kinds of split screen type to playback th ...

  • Speco Technologies PC Pro Series - page 35

    27 Name Function (5) Playback Control Buttons Begin: Move at the beginning of the recorded video file. Previous : Go back to the previous frame. Slower : Play the recorded video file at the speed of 1/2x, 1/4x, o r 1/8x. Rewind : Wind back the recorded video file. Pause : Briefly stop playing the recorded video file. Play : Play the recorded video ...

  • Speco Technologies PC Pro Series - page 36

    28 Name Function (16) Full screen Use the entire area of the screen to onl y display the video. T o return, press the right button of the mou se or ESC on the ke yboard or click the arrow icon. When you switch to full screen in multiple-screen mode, Left click to toggle to only display one of the video in the multiple-screen mode or all. (17) Event ...

  • Speco Technologies PC Pro Series - page 37

    29 3.4 Function Buttons in Comp act Mode T o view in Compact mode, click Exit button. In the logout dialog box, click Compact . (1) (2 ) (3) (4 ) (5 ) Name Function (1) Split Screen Mode Select from 7 kinds of split screen type to view all the camera, or one camera over the other or alongside on a single screen. i - If there are only 4 cameras, you ...

  • Speco Technologies PC Pro Series - page 38

    30 3.5 Function Buttons in PTZ Camera Controller (1) (2) (3) (4) (5) (6) (7) (9) (8) (10) (11) Name Function (1) Close Exit PTZ camera control ler. (2) Setup Configure PTZ c ameras.(see Chapter 3.11 ) (3) AutoPan Operate the PTZ cameras automatically based on the selected camera group preset position number. (4) Focus +/- Adjust the focus manually ...

  • Speco Technologies PC Pro Series - page 39

    31 3.6 Setting Up and Using the EMAP EMAP can hold up to 8 maps in *.bmp/*.jpg format. Y ou may locate the camera, sensor and r elay on the map. 3.6.1 T o Set Up the EMAP 1. Click EMAP . 2. When the EMAP screen appea rs, click the area number (1 to 8 buttons) on where you want to insert the map. 3. Click Load Map to insert the map. When the open di ...

  • Speco Technologies PC Pro Series - page 40

    32 3.6.2 T o Use the EMAP T o use the EMAP: 1. Click EMAP . 2. In the EMAP screen, click the camera icon to switch on the area where the camera is located on the map and to display the video at the upper right co rner of the EMAP screen. At the lower right corner of the EMAP screen, it lists all the warning message. 3. Click Exit to close EMAP scre ...

  • Speco Technologies PC Pro Series - page 41

    33 3.8 T o Bookmark a Section of the Video 1. Click Bookmark . The video playback stops w hen the bookmark button is executed. 2. In the Bookmark dialog box, you may do the following: - Add to include the new refe rence mark in the bookmark list. Y ou may select to enable/disable file protection. - Edit to change the mark description or enable/disa ...

  • Speco Technologies PC Pro Series - page 42

    34 3.10 T o Search Using the Event Search Click on the video screen on where you want to search. 1. Click Event Search . The Event Search te xt (red) would appea r at the lower left corner of the screen. 2. In the Event Search Setting dialog box, che ck the type of condition you want to search. If you select POS, in the Find T ext box, type the wor ...

  • Speco Technologies PC Pro Series - page 43

    35 3.11 T o Search Using the Intelligent Search Click on the video screen on where you want to search. 1. Click Intelligent Search . The Intelligent Search text (red) would appear at the lower left corner of the screen. 2. When the Intelligent Search Setting dialog box and motion detector frame appear , you may adjust the sensitivity bar and the mo ...

  • Speco Technologies PC Pro Series - page 44

    36 3.12 T o Setup the PTZ/IP PTZ Camera 3.12.1 Setup the PTZ Camera 1. In the PTZ control panel, click Setup . 2. When the PTZ Setup dialog box appears, select the camera number and check the Use PTZ box. 3. In the Connection Settings section, select the COMPort where the PTZ camera is connected, PTZ ID number and PTZ camera protocol. Then, click S ...

  • Speco Technologies PC Pro Series - page 45

    37 3.12.2 Setup the IP PTZ Camera 1. In the PTZ control panel, click Setup . 2. When the PTZ Setup dialog box appears, click IP PTZ tab. 3. Select the camera number and check the Use PTZ box. 4. In the Connection Settings section, select the Protocol where the P TZ camera is connected and IP Camera Site that IP or URL of IP camera. Then, click Sav ...

  • Speco Technologies PC Pro Series - page 46

    38 Chapter 4 Customizing the DVR System In the Preview/Advanced screen mode, click button to customize your DVR. When the DVR configuration setup selection appears, select and click the buttons you want to change the setting. 4.1 System Setting In the System Setting dialog box, click OK to accept the new settings, click Cancel to exit without savin ...

  • Speco Technologies PC Pro Series - page 47

    39 In the Map Netw ork Drive windows, select the Drive and fill in the netw ork drive direction in Folder column if you know . Or click Browse to find the folder direction. Click Finish to complete the network drive mapping. After the network dr ive has been added, user needs to create a folder for network storage. In Browse For Folder windows, sel ...

  • Speco Technologies PC Pro Series - page 48

    40 (3)Language Customize the system to display the tool ti ps and dialogs based on the selected language. By default the language is in English. (4) Video St andard Change and select the proper video s ystem according to your camera video system. If the video system setting is wrong, the video would appear abnormal. (5) Attention Please Check the a ...

  • Speco Technologies PC Pro Series - page 49

    41 (1) (2) (3) (4) (7) Configuration Backup a copy of all the settings and allows you to regain the sa me settings back. T o save the current settings, click Export . T o replace the settings with t he one you have saved, click Import. (8) System Controller Setu p T o configure the parameters that is for communicating with the System Controller (an ...

  • Speco Technologies PC Pro Series - page 50

    42 (9) System Conf iguration T o configure the DVR system date, time and IP address. Date/Time Setup 1. Select the Time Zone of DVR server located 2. Select the Month and Date . Click arrow button can switch to different month. 3. Adjust the Time by click spin box arrow button. 4. Click OK to save the configuration. IP Setup - Obtain an IP automa t ...

  • Speco Technologies PC Pro Series - page 51

    43 HDD Format Select automatica or manual to format hard disk. - Automatically 1. Select Aut o ma i t c 2. Click Format to format the h ard disk list in below table. - Manual 1. Select Manual 2. Select the Hard Disk , Parti tion (maximum is 4), and fill in the Size of partition 3. Click Format 4. T o reset the selection, click Reset A ll Display Se ...

  • Speco Technologies PC Pro Series - page 52

    44 (10) Miscellaneous Enable the conditions in Miscellaneous section you want the system to perfo rm. - Status Rep or t Send a dail y system event and attention analys is report. T o change the e-mail settings, click Setup . - Beep if no signal Make sound when the video signal is lost. - Playback Mode Select the mode of playback the video. Select d ...

  • Speco Technologies PC Pro Series - page 53

    45 4.1.1 T o Set the POS Setting In the System Settin g dialog box, POS section, click Setting . T o set the text flo w and color format, click Ad va n ce . 1. In the POS Con sole Setting dialog box, click Ad d to set a new POS setting, Modify to change the POS setting, and Delete to remove the selected POS setting. Click OK to save and close POS C ...

  • Speco Technologies PC Pro Series - page 54

    46 (5) Port Setting: Select the Local or Remote port t o where it is connected Local - select the COM port number which is connected. Remote – Use the UDP protocol for remote c onnection if POS system can broadcast to Internet. Enter the IP address of the remote station. (6) Map to Channel: Select to which camera number to display the transaction ...

  • Speco Technologies PC Pro Series - page 55

    47 4.2 Camera Setting In the Camera Setting dialog box, click OK to accept the new settings, click Cancel to exit without saving, and click Default1/ Default2 to revert back to original factory setting. i Default 1 valus is Bright 50, Contrast 50, Hue 50, and Saturation 50 Default 2 value is Bright 55, Contrast 53, Hue 50, and Saturation 80 (1) (2) ...

  • Speco Technologies PC Pro Series - page 56

    48 (6) A uto Bright ness Control Automatically adjust the brightness (7) Night View Automatically adjust the exposure to make the imag e more visible especially when t he site is dark. Y ou can only use this function when t he Auto Brightness Control is enabled (8) Object Counting Select the two regions on the screen and the system will count the o ...

  • Speco Technologies PC Pro Series - page 57

    49 Detection Sensiti vity: T o set the sensitivity level of face detection. More higher is more easily to detect the difference of the face. Minimal Face Size Level: T o set the face detection of minimal size. The system will only detect the face size is equal or greater than the minimal face size. User should see a green frame on the preview scree ...

  • Speco Technologies PC Pro Series - page 58

    50 - Remote DVR The video source is coming from another DV R server . In the Remote DVR dialog box, enter the server IP , port number , user ID, password and select the camera number . If you are not sure of the server IP and por t, please check the DVR server IP address in Network setting. - IP Camera The video source is coming from Network camera ...

  • Speco Technologies PC Pro Series - page 59

    51 4.2.1 Setup the Object Counting 1. Click Detail to enter the object counting setup window . 2. Enable Detected Regions in Display section. This enables the object counting information show on the screen. Moving Object will enable the object size frame to show on the screen. 3. Click Region1 and press left button of mouse and drag the area that u ...

  • Speco Technologies PC Pro Series - page 60

    52 4.3 Recording Setting In the Recording dialog box, click OK to accept the new settings, click Cancel to exit without saving, and click Default to revert back to original factory setting. (1) (2) (3) (4) (5) (6) (7) (8) (9) (10 ) (11 ) (1) Camera Icons Select the camera number you want to set the r ecording setting for . T o select all the camera ...

  • Speco Technologies PC Pro Series - page 61

    53 - No Recording The system won’t do an y recording. (3) Enable Audio Select to assign the audio channel of the sele cted camera. Y ou can only assign one audio channel to one camera source. This way you can record both audio and video. (4) Motion Detection Adjust the sensitivity of the motion detector . Th e higher the value, the finer the sens ...

  • Speco Technologies PC Pro Series - page 62

    54 4.3.1 T o Mask/Shield an area on the screen 1. In the Mask/Shield Edit section, activate the Enable Mask / Enable Shield check box. 2. In the Edit section, select between Mask or Shield and click the ~ button. 3. Click and drag a frame on the (9) Video Screen to create Mask or Shield area. 4.3.2 T o show and change the color of the Mask 1. Enabl ...

  • Speco Technologies PC Pro Series - page 63

    55 4.4 Network Setting In the Network Setting dialog box, click OK to accept the new settings, click Cancel to exit without saving, and click Default to revert back to original factory setting. (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (1) Server Name Assign a name for the DVR unit. Letters of the alphabet and numb ers only . (2) T ra nsmitting Came ...

  • Speco Technologies PC Pro Series - page 64

    56 2. User Information Please provide the following user information, Host Name (user can choose an y name he/she likes except the one vi olence with other users), Password , E-mail , Comp any , and Countr y . And then, click OK to complete the domain name regi stration. (5) Remote Control Ser ver Enable/disable remote control from remote applic at ...

  • Speco Technologies PC Pro Series - page 65

    57 basis. Or , user can click S ynchronize Time Right Now to adjust time right away . (10) Other Configuration - UPnP Enable UPnP function to automatically configure the port setting on the local network. This function is available when there is UPNP device in the same network. It will write the DVR port information into the router or other net wor ...

  • Speco Technologies PC Pro Series - page 66

    58 4.5 Schedule Setting Schedule to record, backup, enable network, reboot and disable alarm of all the cameras either weekly or one time. The number from 00 to 23 repres ent the time in 24-hour clock. The left most column display the days in a week. T o Set the Schedule Se tting: 1. Select the date in the calendar . Use and buttons to shift the ca ...

  • Speco Technologies PC Pro Series - page 67

    59 - T urn on Relay # Active the Relay at the set time. If there are no Relays connected, T urn on Relay # function will not display in drag down list. The Relay number will depend on ho w many Relays are connected. 3. S pecify to either schedule it weekly or one time. Click ~ to make a selection. 4. Click on the blocks to set the schedule (see als ...

  • Speco Technologies PC Pro Series - page 68

    60 the specific time, right-click on the selected bl ock. Then, set the time to start and end. 3. Check the information beside the calendar . Selected Files : Show the number of files selected. Require Space : Show the total size of the selected file. 4. Enable Auto partition and select to divide the file size into DVD-R or CD-R. The DVR will autom ...

  • Speco Technologies PC Pro Series - page 69

    61 4. Backup Last: Set the time befor e minutes to backup. For example: time before 60 minutes means backup the recorded file from now backw ard 60 minutes. Present time is 13:00, the system will backup start from 12:00 when press quick backup button 4.7 Sensor Setting The I/O device must be installed to use this function. 1. Click the drop-down li ...

  • Speco Technologies PC Pro Series - page 70

    62 4.7.1 T o Setup External I/O Box The DVR system can connect the external I/O box for more installed of I/O devices. 1. Click Ad d . 2. Mark Enable box to enable this external I/O box. 3. Select the Brand of external I/O box from drag down list. 4. In Port Setting , different brand of external I/O box may have different port parameters. Please re ...

  • Speco Technologies PC Pro Series - page 71

    63 9. All connected relays and sensors will be listed. User can click radio button to control relays’ status. And then, click OK to save the setting and click Cancel to exit and without saving. 10. All connected External I/O box and their modules will be listed as tree topology in External I/O Setup windows. ...

  • Speco Technologies PC Pro Series - page 72

    64 11. T o view the all I/O devices information, click I/O Map . 4.8 Relay Setting The I/O device must be installed to use this function. 1. Click the drop-down list and select the relay ID number . 2. Mark Enable to enable the selected relay . 3. Click External IO to configure external I/O devic e if it is available (see also 4.7.1 ). When externa ...

  • Speco Technologies PC Pro Series - page 73

    65 4.9 Alarm Setting In the Alarm Setting dialog box, click Ad d to insert and set new alarm setting, click Delete to remove the selected alarm setting, click OK to exit and save the setting, Cancel to exit without saving, and Default to revert back to original factory setting. (1) (2) (3) (4) (5) (6) (7) T o set the Alarm Setting: 1. Click Ad d to ...

  • Speco Technologies PC Pro Series - page 74

    66 • Normal Reboot: when the DVR system reboot wit hout abnormal condition, the system will send out the alarm message. • Abnormal Reboot: when the DV R system reboot in irregular condition, the system will send out the alarm message. • Recording is sw itched off: when the recording has been stopped, the system will send out the alarm message ...

  • Speco Technologies PC Pro Series - page 75

    67 displayed on TV when the alarm is triggered. ~ Alarm Camera: the channel video that has an alarm occurred will be displayed on TV . ~ Camera #(1~32): select the camera channel video that you want to be displayed on when an alarm is activated. b. Retrieve time: set the waiting duration before system s witching back to original display mode on aut ...

  • Speco Technologies PC Pro Series - page 76

    68 Upload file to remote computer thru FTP (File T ransfer Protocol). T o setup click Detail (see also Chapter 4.9.5 ). - Start Re co rd in g Record the video from the selected camera. T o setup click Detail (see also Chapter 4.9.6 ). - SMS (Short Message Service)/MMS (Multi media Messaging S ystem) SMS transmits only text messages to mobile phone. ...

  • Speco Technologies PC Pro Series - page 77

    69 4.9.1 T o Setup Alarm Relay: 1. Beside the Relay Output check box, click Detail . 2. In the Alarm Relay dialog box, select from the available relay list and in the ON column, set to enable/disable the relay operation when the alarm is activated. 3. In the Retrieve time check box, you may enable/disable to extend the relay operation time and set ...

  • Speco Technologies PC Pro Series - page 78

    70 4.9.3 T o Setup Call Out List: 1. Beside the Make Phone Calls check box, click Det ail . 2. In the Call Out List, click Ad d t o in se r t a new contact number , Modify to edit the selected item, Remove to delete the selected item, T est to check if it is working. 3. In the Call Out Setting, enter the phone number and description. Click to selec ...

  • Speco Technologies PC Pro Series - page 79

    71 (2) Mail T o check if it is working, click T est Account button. From : Enter the sender e-mail address. T o and CC : Enter the recipient email address and separate it with comma or a semicolon (;). Subject : Enter the message title. Message : T ype the message. (3) Email Notice Setting Notice Inter val Set the period of time before it sends ano ...

  • Speco Technologies PC Pro Series - page 80

    72 4.9.7 T o Setup SMS/MMS Setting: T o use this feature, GSM/GPRS modem is requi red. Connect the GSM/GPRS modem to the serial COMM port of PC. Beside the SMS/MMS check box, click Detail . Select the port number in Com Port drop down list from where the GSM/GPRS modem is connected. 1. Click Modem Setup button to automatically detect the Modem Baud ...

  • Speco Technologies PC Pro Series - page 81

    73 4.9.8 T o Setup PTZ Preset Point: Beside the PTZ preset point check box, click Detail . In the T rigger PTZ Preset Setting dialog box, select the PTZ camera number then select the Enable check box. Select the position of the PTZ camera when the alarm is activated and ended. For the PTZ camera ended point, user also can select one preset position ...

  • Speco Technologies PC Pro Series - page 82

    74 4.9.11 T o Setup POS Ke yword Setting 1. Beside the Send to POS Keyword check box, click Detail . 2. In the POS Keyword Setting, select the camera to enable/disable scanning the keyword. Enable Al l to select all cameras. 3. Enter the text bel ow keyword text box. Click Ad d to include the keyword in the list. T o remove, select the word in the ...

  • Speco Technologies PC Pro Series - page 83

    75 - Suspicious Object Suspicious Object is including the object missing or the doubtful object appears on the screen. Click OK to save and exit the setup windows. T o exam the setup con dition, click St art T est . 1. Select the camera number (0-16) and press right button on the m ouse to call up the setup windows. And then, click the Suspicious O ...

  • Speco Technologies PC Pro Series - page 84

    76 - Scene Change When the camera has been moved, the system will alarm. 1. Select the camera number (0-16) and press right button on the m ouse to call up the setup windows. And then, click the Scene Chang e T ab. 2. Click Save to capture the image for comparing reference. T o view t he captured image, enable the Show Reference Image check box. Th ...

  • Speco Technologies PC Pro Series - page 85

    77 4.10 User Setting Only administrator can access User Setting. In th e User Setting dialog box, click Add t o i n s e r t a new user , Dele te to remove the selected user , Edit to modify the user control right, OK to e xit and accept the setting, and Cancel to exit without saving the setting. After clicking Add or Edit , you m ay customize the u ...

  • Speco Technologies PC Pro Series - page 86

    78 - Remote Access Time Enable Infinite check box to access DVR without time limit. If you want to set time limit, enter the number of minutes in Minute text bo x. (4) Visible Camera Select the camera number that would allow the user to access or view . T o select all the cameras, enable the AL L check box. (5) Name Enter the user name. (6) Descrip ...

  • Speco Technologies PC Pro Series - page 87

    79 Chapter 5 Backup V ideo Players Y ou can playback the backup files using QLogVie wer and Player applications. When you back up the recorded file, QLogViewer and Player applic ations are automatically included in the backup folder . QLogViewer can only playback one video at a time. It only comes with video segmentation, output segmentation, captu ...

  • Speco Technologies PC Pro Series - page 88

    80 5.1 Familiarizing QLogV iewer Buttons (9) (1) (3) (2) (4) (5) (6) (7) (8) Name Function (1) Time Display the file date, time and play speed. (2) File Display the path where the file is located. (3) Playback Control Buttons Begin: Move at the beginning of the recorded video file. Previous: Go back to the previous frame. Slower: Play the recorded ...

  • Speco Technologies PC Pro Series - page 89

    81 5.2 Familiarizing the Player Buttons (3) (5) (4) (6) (8) (7) (10) (9) (11) (12) (13) (14) (17) (16) (15) (1) (2) Name Functio n (1) Split Screen Mode Select from six (6) different split screen t ype to playback the recorded video file of all the camera, or one camera over the other or alongside on a single screen. i - If there are only 4 cameras ...

  • Speco Technologies PC Pro Series - page 90

    82 Name Functio n (6) Date Select the date on the calendar a nd the time from 00 to 2 3 to where to start playing the recorded video file. i The numbers from 00 to 23 represent the time in 24-hour clock. Th e numbers from 01 to 16 represent the camera ID. The blue colore d column indicates that there is a recorded video file on that period of time. ...

  • Speco Technologies PC Pro Series - page 91

    83 Chapter 6 Using Functional Keys The DVR system provides shortcut keys. The table shows the function keys and descriptions. Function Keys Description F1 Display system information F2 S tart recording F3 Enable network function F4 Access system settings F5 Switch to playback mode F6 Access EMAP setting F7 Access PTZ camera contro l panel F8 Snapsh ...

  • Speco Technologies PC Pro Series - page 92

    84 Chapter 7 Using the Remote Programs Y ou can use Mi crosoft Internet Explorer to a ccess DVR server by entering th e IP address or domain name. T o use this feature, make sure that you are connected to the internet and the Network feature is enabled. Accessing this feature for the first time you will be prompted by your browser to install WebCam ...

  • Speco Technologies PC Pro Series - page 93

    85 7.1 Familiarizing the W ebVie wer Buttons Right-clicking on the webviewer video screen, enabl es you to start video recording, change video quality , switch camera and enable/disable DirectDraw . (1) (4) (5) (8) (13) (6) (7) (9) (10) (11) (12) (14) (15) (2) (3) Name Function (1) DirectDraw Enhance the video quality. i Not all graphic cards can s ...

  • Speco Technologies PC Pro Series - page 94

    86 Name Function (11) Remote setup Change the DVR server settings (see also Chapter 7.1.1 ). (12) Select a PTZ Camera Initiate PTZ camera control ler (see also Chapter 7. 2 ) (13) Snapshot Capture and save the screen shot in *.bmp format. (14) Full screen Use the entire area of the screen to onl y display the video. To return, Right click the mouse ...

  • Speco Technologies PC Pro Series - page 95

    87 7.1.1 T o Setup Remote System Setting Click OK to exit and save the setting and Cancel to exit without saving the setting. The setting here applies to Remote DVR only . (11) (12) (13) (14) (10) (1) (9) (8) (7) (6) (5) (4) (3) (2) (1) Camera Name Select the camera you want to adjust the settings. (2) Enable Set to enable/disable the selected came ...

  • Speco Technologies PC Pro Series - page 96

    88 - Always Recording Record the video from the selected camera and save it to the designated storage path (see also Chapter 4.1 #1 ). - Motion Recording S tart recording the video from the selected camera only when the system detects motion. Once a motion is detected, the system autom atically saves the previous frames and stop based on the S tart ...

  • Speco Technologies PC Pro Series - page 97

    89 7.2 Familiarizing the WebV iewer PTZ Buttons (4) (3) (2) (5) (6) (1) Name Function (1) Direction buttons Adjust and position the focal point of the PTZ camera. Click the center to pan automatically. (2) Select PTZ Choose to enabl e/disable t he PTZ camera. In the Select PTZ dialog box, Select column, click to enable/disable viewing and controlli ...

  • Speco Technologies PC Pro Series - page 98

    90 7.3 Familiarizing the Remote Console Buttons (1) (3) (8) (7) (6) (5) (4) (9) (10) (12) (13) (14) (15) (2) (11) Name Function (1) Exit Close the Remote Console. (2) Volume Enable/disable the sound. (3) Split Screen Mode Select from six (6) different split screen type to playback the recorded video file of all the camera, or one camera over the ot ...

  • Speco Technologies PC Pro Series - page 99

    91 Name Function (11) Camera ID Sho w the number of cameras that are being viewed. When you are in single screen mode, click the camera ID number to switch and view other camera. (12) Event log Show the record of activities that take place in the system. To filter the records, select and click the option button to only display Event, System, Operat ...

  • Speco Technologies PC Pro Series - page 100

    92 (4) Channel Settings The numbers from 01 to 16 represent the camera ID. In Transmitting Channels section, enable the camera number to receive the camera signal from the server . In Visible Channels section, enable the camera number to view the camera signal on Remote Console screen. T o select all the cameras, enable the AL L check box. 7.4 Usin ...

  • Speco Technologies PC Pro Series - page 101

    93 T o Make a Selection: 1. Select the date in the calendar. Use and button s to shift the calendar to the lef t or right. 2. In the table below , click on the blue block to select and open the recorded file. The blue block turns red when it is selected. The bl ock that appears in white doesn’t have dat a. Y ou can only select one block when you ...

  • Speco Technologies PC Pro Series - page 102

    94 7.4.1 Familiarizing the Local Playback Buttons (2) (4) (3) (5) (6) (9) (8) (7) (10) (11) (12) (13) (1) Name Function (1) Split Screen Mode Select from six (6) different split screen t ype to playback the recorded video file of all the camera, or one camera over the other or alongside on a single screen. i - If there are only 4 cameras, you won? ...

  • Speco Technologies PC Pro Series - page 103

    95 Name Function (5) Date Select the date on the calendar a nd the time from 00 to 23 to where to start playing the recorded video file. i The numbers from 00 to 23 represent the ti me in 24-hour clock. The numbers from 01 to 16 represent the camera ID. The blue colored column indicates that there is a recorded video file on that period of time. Wh ...

  • Speco Technologies PC Pro Series - page 104

    96 7.4.2 Familiarizing the RealTime Playback Buttons (2) (4) (3) (5) (6) (9) (8) (7) (10) (11) (1) Name Function (1) Split Screen Mode Select from two (2) different split screen t ype to playback the recorded video file of all the camera, or one camera. i - If there are only 4 cameras, you won’t be able to switch to 9, 16, and 13 split screen mod ...

  • Speco Technologies PC Pro Series - page 105

    97 Name Function (5) Date Select the date on the calendar and the time from 00 to 23 to where to start playing the recorded video file. i The numbers from 00 to 23 represent the time in 24-hour clock. Th e numbers from 01 to 16 represent the camera ID. The blue colore d column indicates that there is a recorded video file on that period of time. Wh ...

  • Speco Technologies PC Pro Series - page 106

    98 7.4.3 Familiarizing the Download and Playback Buttons (2) (8 ) (7 ) (4 ) (6 ) (5 ) (1) (3) Name Function (1) Progress bar Sho w the progress of the file being played. You may move the bar to seek at any location of the track. (2) Playback Control Buttons Begin: Move at the beginning of the recorded video file. Previous: Go back to the previous f ...

  • Speco Technologies PC Pro Series - page 107

    99 7.5 Using Han dyViewer to Access DVR server Users can use a mobile phone to access the DVR th rough Internet. Make sure your mobile phone support IE browser and is connected to the internet. T o access the DVR server , open IE browser and enter http://enter server IP or domain name here/mobile. Y ou c an see the latest screen shot. Click << ...

  • Speco Technologies PC Pro Series - page 108

    100 3. Read the license agreement and click Ye s to accept all the terms. The system w ill then automatically install the application. 4. When you are prompted, click Ye s to install the application using the default directory . 5. When done, click OK . 7.6.2 T o install PDA Viewer from the Internet 1. Make sure you ar e connected to t he internet. ...

  • Speco Technologies PC Pro Series - page 109

    101 4. After the installation, the PDA Viewer 5.5 icon will appear in the Programs list. 7.6.3 T o Use the PDA Viewer 1. Run the PDViewer 5.5 in the Programs. 2. Familiarizing the PDA Viewer buttons. (7) (6) (5) (3) (4) (8) (9) (10) (1) (2) Name Function (1) Connect Hook up to the DVR server. Make sure you are connected to internet. When the iView ...

  • Speco Technologies PC Pro Series - page 110

    102 Name Function (4) Minimize Reduce the size to taskbar. (5) Exit Close the PDA-Viewer. (6) Focus Adjust the focus of PTZ came ra to produce clear image. (7) Full Screen Use the entire screen to only displa y the video. (8) Snapshot Capture and save the screen shot in *.bmp format. (9) Zoom Zoom in and out the PTZ camera image. (10) Direction but ...

  • Speco Technologies PC Pro Series - page 111

    103 7.6.5 T o Use the JA V A Viewer 1 . R u n t h e J AVAV i e w e r p r o g r a m . 2. Enter the DVR IP address, port number , user ID, and password. Please refer to your DVR server setting for that information. 3. And then, select the Connect to connect to DVR server . 4. Click Ye s to accept the data from DVR server . 5. When connection is succe ...

  • Speco Technologies PC Pro Series - page 112

    104 6. T o switch to different camera view , select menu and select the channel. 7 . T h e J AVAV i e w e r s upport PTZ control function, you can refer to Help file for detail function control key . Select menu and go the way down to select the Help file. → ...

  • Speco Technologies PC Pro Series - page 113

    105 Chapter 8 Image V erification ImageV erification is a watermark-checking program to identify the authenticity of a saved image (e.g. by snapshot). This program can only verify uncompressed bmp image files. 8.1 T o Run the ImageV erification program 1. Click Start > Programs > DSS > ImageVerification . 2. In the ImageVerification screen ...

  • Speco Technologies PC Pro Series - page 114

    106 Chapter 9 iEnhance The bundled iEnhance is a video editing tool and can only be used with *.dvr video file. It allows you to adjust the video picture quality , segment and save the wanted portion of the video, zoom in and out the image, and print or save the screen shot. Y ou can also save the setting and apply it on other files. (1) (2) (4) (3 ...

  • Speco Technologies PC Pro Series - page 115

    107 Name Function (10) History Box List all the actions. (1 1) Undo Delete the last action. (12) Noise Reduce Adjust the softness and rep air the damaged colours. (13) Sharpness Improve the overall image by enhancing edges. This gives the image more depth. (14) Effect s • Gray Scale : convert the image into black and white (monochrome). • Norma ...

  • Speco Technologies PC Pro Series - page 116

    108 9.1 T o Use iSt able The iS table function can reduce the jolt in the recorded video. 1. Click Open File button and select the recorded video. 2. And then, click iStable button. 3. iSt able windows will show up. 4. Select the smoothne ss level – 1(Low), 2, 3, 4, and 5(High). The default value is 3. 5. Click Play button, and then i-S table fun ...

  • Speco Technologies PC Pro Series - page 117

    109 Chapter 10 Web T ools The bundled Web T ools includes Dispatch Server and Remote Backup program. T o install Web T ools, place the CD into the CD-ROM drive then click Inst all Web T ools . 10.1 Disp atch Server Dispatch is designed to reduce the network traf fic of the DVR server . Instead of connecting directly to the DVR server , the client c ...

  • Speco Technologies PC Pro Series - page 118

    1 10 10.2 Remote Setup Remote Setup is a tool for configuring DVR server from remote site. T o install Remote Setup application, insert the Installation CD into CD-ROM drive and click Web T ools . After installation, click to st art the Remote Setup application. 10.2.1 T o Add DVR server User need to add a DVR server and make connec tion in order t ...

  • Speco Technologies PC Pro Series - page 119

    111 5. Once the connecting is success, user can start to configure DVR server. 6. When connection is lost, click Reconnect to conn ect again. 7. T o modify or delete the added DVR server , select the DVR server from listing and click Modify to change the setting and click Delete to remove the DVR server . 8. User also can import the setting by clic ...

  • Speco Technologies PC Pro Series - page 120

    1 12 the right text box and then click OK . (5) TV Out Set the display time gap from 3 to 10 sec. before it switches to the next camera. (6) Miscellaneous Enable the conditions in Miscellaneous section you want the system to perfo rm. - Beep if no sig nal Make sound when the video signal is lost. - Mandator y Record Always record video when softwar ...

  • Speco Technologies PC Pro Series - page 121

    1 13 Camera Setting Select the camera from remote DVR servers to modify settings. In the Camera Setting windows, click Up date to save and apply the new settings, click Exit to exit without saving, and click Default1/ Defaul t2 to revert back to original factory setting. (1) (2) (3) (4) (5) (6) (7) (8) (1) Camera Icons Select the camera number you ...

  • Speco Technologies PC Pro Series - page 122

    1 14 Display the video of the selected camera. Record Setting In the Recording setup windows, click OK to acc ept the new settings, click Exit to exit without saving, and click Default to revert back to original factory setting. (2) (1) (3) (4) (5) (6) (7) (8) (1) Camera Icons Select the camera number you want to set the recording setting. T o sele ...

  • Speco Technologies PC Pro Series - page 123

    1 15 hard disk space. (5) Frame Rate Set the maximum number of frames to be recorded during motion and motionless state. The frame rate ranges from 1 to 30 for NTSC and 1 to 25 for P AL. The higher the frame rate, it uses more hard disk space. (6) Video Size User can activate the Enable Deinterlace to enhance the video quality . Set the Enabl e Dei ...

  • Speco Technologies PC Pro Series - page 124

    1 16 Enter the Domain Name and Password. T T o use this feature, first register your domain name on the following Web site http://ddns.dss.com.tw 1. User Login Browse the website ddns.dss.com.tw with Microsoft IE or Netscape Navigator to access the following dialog.Y ou will be prompted to enter C D key number , product name, password, and user inf ...

  • Speco Technologies PC Pro Series - page 125

    1 17 basis. (9) Other Configuration - UPnP Enable UPnP function to automatically conf igure the port setting on the local netw ork. This function is available when there is UPNP device in the same network. It will write the DVR port information into the router or other ne twork device - Enable White List An access permit list for the remote accessi ...

  • Speco Technologies PC Pro Series - page 126

    1 18 Schedule Setting Schedule to record, backup, enable network, reboot and disable alarm of all the cameras either weekly or one time. The number from 00 to 23 repres ent the time in 24-hour clock. The left most column display the days in a week. T o Set the Schedule Se tting: 1. Select the date in the calendar . Use and buttons to shift the cale ...

  • Speco Technologies PC Pro Series - page 127

    1 19 Alarm Setting In the Alarm Setting dialog box, click Ad d to insert and set new alarm setting, click Delete to remove the selected alarm setting, click OK to exit and save the setting, Cancel to exit without saving, and Default to revert back to original factory setting. (1) (2) (3) (4) (5) (6) (7) T o set the Alarm Setting: 1. Click Ad d to i ...

  • Speco Technologies PC Pro Series - page 128

    120 send out the alarm message. • Network is switched off : when the network connection of DVR system is lost, the system will send out the alarm message. • Hard Disk failed: when the hard disk can’t work normally , the system will send out the alarm message. • T emperature: set a temperature limited of system for system to alarm. When DVR ...

  • Speco Technologies PC Pro Series - page 129

    121 setup click Det ail (see also T o Setup Alarm SO P ). - Send to CMS (Central Manag ement System) Enable/disable the selected camera to send video to CMS when the alarm is activated (see also T o Setup CMS Setting ) - Snap shot T ake a snapshot when the alarm is activated. a. Select Camera: specify which channel video to be snapshot when the ala ...

  • Speco Technologies PC Pro Series - page 130

    122 T o Setup Send E-mail Setting: Beside the Send Email check box, click Det ail . In the E-mail Setting dialog box, click OK to exit and save the setting and Cancel to exit withou t saving the setting. (1) Mail Server Enter the SMTP Server and port. If your e-ma il system requires user identification, enable Authentication check box and enter Use ...

  • Speco Technologies PC Pro Series - page 131

    123 T o Setup Alarm Recording Se tting: 1. Beside the S tart Recording check box, click Det ail . 2. In the Alarm Rec ording Setting dialog box, select the camera to enable/disable video recording. Enable Al l to select all cameras. 3. In the Frame Rate selection, select As Setting to record the number of frames based on the Recording Setting or Ma ...

  • Speco Technologies PC Pro Series - page 132

    124 3. T o add the DVR server , click Ad d 4. In the Add New DVR windows, enter the Name, I P , user ID, and password. 5. Select the Backup mode: Auto Backup mode: the backup will automatically execute when the setup is completed - In Begin Date d rop down calendar , select the date from where to start - Click Add to set the storage path. - Click D ...

  • Speco Technologies PC Pro Series - page 133

    125 7. Click Start to begin backup and click S top to stop backup progress. 8. For manually backup, click file select button and s elect the DVR wants to backup Click to start backup progress While backup, the start button will turn to stop button Un-mark check box to disable backup ...

  • Speco Technologies PC Pro Series - page 134

    126 Chapter 11 Using the R emote Control Server The bundled Remote Control Server enables the PC with Central Management System program (CM1000) installed in it remotely access the DVR server . Y ou man y need to manually run this program for CMS access the DVR server . T o run, click st art > Programs > DSS > DVR > Remote Control Serve ...

  • Speco Technologies PC Pro Series - page 135

    127 APPENDIX A Netw ork Servic e Port The following table shows the ports that DVR server uses for certain network service. Port # Va r i a b l e Remote Consol e (CMS) 5550 Y WebVi ew er 80 Y 2-way audio 5552 Y Remote Control (CMS) 5551 Y DVR POS 5150 Y DVR DDNS (Upload / Dow nload) 53 / 1053 N ...

  • Speco Technologies PC Pro Series - page 136

    128 APPENDI X B Inst all PTZ through RS-232 Interface Use the RS232 to RS485 converter to install an analogue PTZ camera to the COM port. Please refer to the below figure for installation RS-232 Cable Male Femal e RS485 to RS232 Conve rter T+ T- DVR unit PTZ Came ra ...

Manufacturer Speco Technologies Category DVR

Documents that we receive from a manufacturer of a Speco Technologies PC Pro Series can be divided into several groups. They are, among others:
- Speco Technologies technical drawings
- PC Pro Series manuals
- Speco Technologies product data sheets
- information booklets
- or energy labels Speco Technologies PC Pro Series
All of them are important, but the most important information from the point of view of use of the device are in the user manual Speco Technologies PC Pro Series.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Speco Technologies PC Pro Series, service manual, brief instructions and user manuals Speco Technologies PC Pro Series. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Speco Technologies PC Pro Series.

Similar manuals

A complete manual for the device Speco Technologies PC Pro Series, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Speco Technologies PC Pro Series by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Speco Technologies PC Pro Series.

A complete Speco Technologies manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Speco Technologies PC Pro Series - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Speco Technologies PC Pro Series, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Speco Technologies PC Pro Series, that we can find in the current document
3. Tips how to use the basic functions of the device Speco Technologies PC Pro Series - which should help us in our first steps of using Speco Technologies PC Pro Series
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Speco Technologies PC Pro Series
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Speco Technologies PC Pro Series in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Speco Technologies PC Pro Series?

Use the form below

If you did not solve your problem by using a manual Speco Technologies PC Pro Series, ask a question using the form below. If a user had a similar problem with Speco Technologies PC Pro Series it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)