-
Yamaha CDC-95 - page 1
IMPORTANT! Please record the serial number of this unit in the space below. Model: Serial No.: The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN ...
-
Yamaha CDC-95 - page 2
2 SAFETY INSTR UCTIONS 1 Read Instructions – All the safety and operating instructions should be read before the unit is operated. 2 Retain Instructions – The safety and operating instructions should be retained for future reference. 3 Heed Warnings – All warnings on the unit and in the operating instructions should be adhered to. 4 Follow In ...
-
Yamaha CDC-95 - page 3
3 1 To ensure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install your unit in a cool, dry, clean place – away from windows, heat sources, and too much vibration, dust, moisture or cold. Avoid sources of hum (transformers, motors). To prevent fire or electrical shock, do not expose to ...
-
Yamaha CDC-95 - page 4
CONNECTIONS ● Before making any connections, switch OFF the power to the unit and the amplifier or other component. ● Connect the “LINE OUT” terminals to the “CD” (or “AUX”) terminals of the amplifier. If the amplifier does not have such terminals, use the “TAPE PB” terminals. For additional details concerning these connections, ...
-
Yamaha CDC-95 - page 5
IDENTIFICA TION OF COMPONENTS FRONT P ANEL * Remote control sensor The remote control sensor receives the control signal from the remote control transmitter that belongs to the system amplifier. 5 ENGLISH POWER TIME 1 234 5 SKIP SEARCH PROG PLAYXCHANGE OPEN/CLOSE PLAY STOP DISC SKIP CLEAR REPEAT RANDOM DISC MODE DIMMER PAUSE OPEN/CLOSE button butto ...
-
Yamaha CDC-95 - page 6
LO ADING THE DISC/DISC PLA Y 1 2 3 4 5 Select the disc play mode (DISC MODE: SINGLE or ALL) while watching the display. “SINGLE” mode: The unit will play a designated disc only. “ALL” mode: The unit will play all discs in the tray in sequence. 6 * If necessary, select a desired disc by using a DISC -select button or the DISC SKIP buttons. N ...
-
Yamaha CDC-95 - page 7
T o stop play temporaril y * To resume play, press the PAUSE button again or the PLAY button. T o stop play completel y SKIP PLA Y ● To play from the beginning of the track following the one now playing ● To play from the beginning of the track now playing ● To play from the beginning of the track before the one now playing * These operations ...
-
Yamaha CDC-95 - page 8
T o adv ance or rever se pla y rapidly (MANU AL SEARCH) T o advance rapidl y T o reverse rapidl y ● The sound can be heard (although slightly garbled) during manual search in either direction. This is convenient for locating a precise position within a track, or for reviewing the contents quickly. ● Manual search can also be performed while dis ...
-
Yamaha CDC-95 - page 9
RANDOM-SEQUENCE PLA Y You can play the tracks in a random sequence (up to 99 tracks). The unit will automatically mix up tracks from all discs or any desired disc in the disc tray. 1 2 3 Select whether to mix up tracks from one disc or all discs in the tray. * If the “SINGLE” disc play mode is selected, next select a desired disc by using the D ...
-
Yamaha CDC-95 - page 10
PR OGRAM PLA Y You can enjoy listening to your favorite tracks selected from one or several discs in any desired order using programmed play. ➀ Shows the program number for the track to be set next. ➁ Shows the selected disc and track number. ➂ Shows the total time of the tracks currently programmed, if tracks are selected from one disc only. ...
-
Yamaha CDC-95 - page 11
Notes ● You can set as many as 20 programs at one time. ● If you will make programming with the DISC 1 tray empty, be sure to press a DISC SKIP button before starting programming. ● The total time of the programed tracks will not be displayed, if tracks are selected from more than one disc. ● The total time of the programmed tracks will not ...
-
Yamaha CDC-95 - page 12
REPEA T PLA Y You can play any desired track or disc (set of discs) repeatedly by pressing the REPEAT button. The repeat play mode will change whenever you press the REPEAT button. 12 SINGLE REPEA T (S REP) A single track is repeatedly played. * This is also available in the programmed-play mode and the random-sequence play mode. (If the repeat pla ...
-
Yamaha CDC-95 - page 13
NO TES ABOUT HANDLING COMP A CT DISCS ● This compact-disc player is designed only for playing of compact discs bearing the mark. Never attempt to load any other type of disc into the unit. The unit will also play 3-inch (8-cm) compact discs. ● To remove a disc from its storage case, open the case and then press down at the center; with a finger ...
-
Yamaha CDC-95 - page 14
AUDIO SECTION Frequency response .......................... 2 Hz – 20 kHz, ±0.5 dB De-emphasis equalization ......................................... ±0.5 dB Harmonic distortion+noise (with L.P.F.) ..................................... Less than 0.003% (1 kHz) S/N ratio ........................................................................ 11 ...
-
Yamaha CDC-95 - page 15
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, D-25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77 ...
Do you have a question concerning Yamaha CDC-95?
Use the form below
If you did not solve your problem by using a manual Yamaha CDC-95, ask a question using the form below. If a user had a similar problem with Yamaha CDC-95 it is likely that he will want to share the way to solve it.