English dropdown-ico

Manual Harbor Freight Tools 95082

21 pages 1.34 mb
Download

Go to site of 21

Summary
  • Harbor Freight Tools 95082 - page 1

    2-1/2 HP / 12” PLANER WITH DUST COLLECT OR 95082 SET UP AND OPERA TING INSTRUCTIONS Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2010 by Harbor Freight T ools ® . All rights reserved. No portion of this manual or a ...

  • Harbor Freight Tools 95082 - page 2

    SKU 95082 For technical questions, please call 1-800-444-3353. Page 2 SA VE THIS MANUAL Keep this manual for the safety warn- ings and precautions, assembly , operat- ing, inspection, maintenance and cleaning procedures. Write the product’ s serial number in the back of the manual near the assembly diagram (or month and year of purchase if produc ...

  • Harbor Freight Tools 95082 - page 3

    SKU 95082 For technical questions, please call 1-800-444-3353. Page 3 Unmodied plugs and matching out - lets will reduce risk of electric shock. A void body contact with grounded b. surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. Do not expose power tools to rain ...

  • Harbor Freight Tools 95082 - page 4

    SKU 95082 For technical questions, please call 1-800-444-3353. Page 4 Power tool use and care 4. Do not force the power tool. Use a. the correct power tool for your ap- plication. The correct power tool will do the job better and safer at the rate for which it was designed. Do not use the power tool if the b. switch does not turn it on and off. Any ...

  • Harbor Freight Tools 95082 - page 5

    SKU 95082 For technical questions, please call 1-800-444-3353. Page 5 Never leave the Planer unattended 6. while running. T urn power off if you have to leave the Planer . T urn off Planer when jammed. 7. Before each use, check all nuts, 8. bolts, and screws for tightness. Keep extension cord off the 9. ground and away from water . Install this pro ...

  • Harbor Freight Tools 95082 - page 6

    SKU 95082 For technical questions, please call 1-800-444-3353. Page 6 GROUNDING TO PREVENT ELECTRIC SHOCK AND DEA TH FROM INCORRECT GROUNDING WIRE CONNECTION: Check with a qualied electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding pro ...

  • Harbor Freight Tools 95082 - page 7

    SKU 95082 For technical questions, please call 1-800-444-3353. Page 7 Double insulated tools may be used 2. in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-Prong Plug.) Extension Cords Grounded 1. tools require a three wire extension cord. Double Insulated tools can use either a two or three wire extension ...

  • Harbor Freight Tools 95082 - page 8

    SKU 95082 For technical questions, please call 1-800-444-3353. Page 8 SPECIFICA TIONS Electrical Requirements 120 V~ / 60 Hz / 1 1.8 A Motor (Cutter head) Speed 2-1/2 HP , 18,800 cuts per minute Maximum Cutting Depth 3/32” Stock Capacity 4-1/2” x 12” lumber Feed Speed 20 Feet per Minute Included Accessories 1 Hex Wrench (4mm) 2 Magnets, 1 Dus ...

  • Harbor Freight Tools 95082 - page 9

    SKU 95082 For technical questions, please call 1-800-444-3353. Page 9 Place Rubber Cap (5) on the Handle 5. and tighten Bolt (6) into the Right Cap (1 1). Using a screwdriver (not included), 6. fasten the two Cord Wrap Frames (29) to the Side Cover (30) using four Screws (28). See Figure B. Use included Hex Wrench (122) to 7. loosen Head Screw (79) ...

  • Harbor Freight Tools 95082 - page 10

    SKU 95082 For technical questions, please call 1-800-444-3353. Page 10 objects, that will present a hazard while working. General Operating Instructions Note: Before operating, remove foam backing material from the T able (95). Measure the thickness of the wood 1. stock to be planed. T urn the Adjustment Knob (10) to set 2. the thickness of the cut ...

  • Harbor Freight Tools 95082 - page 11

    SKU 95082 For technical questions, please call 1-800-444-3353. Page 1 1 8. Note: Do not stand behind the end of the board during planing. Plane dry , unwarped, clean boards only . Avoid planing boards that have knots; loose knots can jam the machine or become a projectile. Do not plane boards that have foreign objects (nails, staples, etc.) in them ...

  • Harbor Freight Tools 95082 - page 12

    SKU 95082 For technical questions, please call 1-800-444-3353. Page 12 MAINTENANCE AND SER VICING Procedures not specically explained in this manual must be performed only by a qualied technician. TO PREVENT SERIOUS INJUR Y FROM ACCIDENT AL OPERA TION: T urn the Power Switch of the tool to its “OFF” position and unplug the tool from its e ...

  • Harbor Freight Tools 95082 - page 13

    SKU 95082 For technical questions, please call 1-800-444-3353. Page 13 1. Unscrew and remove the Bolts (16) on the Blade Guard (14), slide Blade Guard slightly to the right, and lift it. See Figure D. Figure D 2. Using gloves, rotate the Cutterhead (53) so that the Screws (55) are accessible. 3. Using the Hex W rench (122), unscrew and remove the s ...

  • Harbor Freight Tools 95082 - page 14

    SKU 95082 For technical questions, please call 1-800-444-3353. Page 14 ADJUST ROLLER CASE LEVEL. If the Roller Case (47) is not parallel to the base (104), the planer will produce cuts of uneven depth. 1. Use a test piece to measure the height of the taper . 2. T urn the Planer off and disconnect it from the power supply . 3. Fold both Extension T ...

  • Harbor Freight Tools 95082 - page 15

    SKU 95082 For technical questions, please call 1-800-444-3353. Page 15 T roubleshooting Problem Possible Causes Likely Solutions T ool will not start No power at outlet. 1. Cord not connected. 2. Check power at outlet. 1. Check that cord is plugged in. 2. Gouging at ends of board (snipe) Dull Blades. 1. T oo little support of long boards. 2. Uneven ...

  • Harbor Freight Tools 95082 - page 16

    SKU 95082 For technical questions, please call 1-800-444-3353. Page 16 P ARTS LIST Part Description Q’ty 1 Left Cap 1 2 Dowel Pin 4 3 Bushing 4 4 Roller 2 5 Cap 1 6 M5x0.8x25mm Bolt w/Lock W asher 1 7 Knob 1 8 Screw 1 9 Knob Housing 1 10 Handle 1 11 Right Cap 1 12 M6x1.0x6mm Pan Head Screw 4 13 Grip 2 14 Blade Guard 1 15 Air Duct 1 16 M5x0.8x10mm ...

  • Harbor Freight Tools 95082 - page 17

    SKU 95082 For technical questions, please call 1-800-444-3353. Page 17 Part Description Q’ty 98 M5x0.8x8mm Set Screw 4 99 Lead Screw 2 100 Column 3 101 Lead Screw 1 102 Column 1 103 Scale 1 104 Base 1 105 3AM1x30 Retaining Ring 4 106 6000ZZ Ball Bearing 4 107 Bearing Retainer 4 108 Spacer 4 109 Sprocket 4 1 10 Flat W asher M4 4 111 M4x0.7x12mm Pa ...

  • Harbor Freight Tools 95082 - page 18

    SKU 95082 For technical questions, please call 1-800-444-3353. Page 18 ASSEMBL Y DIAGRAM ...

  • Harbor Freight Tools 95082 - page 19

    SKU 95082 For technical questions, please call 1-800-444-3353. Page 19 ASSEMBL Y DIAGRAM (CONTINUED) ...

  • Harbor Freight Tools 95082 - page 20

    SKU 95082 For technical questions, please call 1-800-444-3353. Page 20 ASSEMBL Y DIAGRAM (CONTINUED) ...

  • Harbor Freight Tools 95082 - page 21

    SKU 95082 For technical questions, please call 1-800-444-3353. Page 21 Record Product’ s Serial Number Here: Note: If product has no serial number , record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only , and are not avail- able individually as replacement parts. LIMITED 1 YEAR W ARRANTY H ...

Manufacturer Harbor Freight Tools Category Planer

Documents that we receive from a manufacturer of a Harbor Freight Tools 95082 can be divided into several groups. They are, among others:
- Harbor Freight Tools technical drawings
- 95082 manuals
- Harbor Freight Tools product data sheets
- information booklets
- or energy labels Harbor Freight Tools 95082
All of them are important, but the most important information from the point of view of use of the device are in the user manual Harbor Freight Tools 95082.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Harbor Freight Tools 95082, service manual, brief instructions and user manuals Harbor Freight Tools 95082. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Harbor Freight Tools 95082.

Similar manuals

A complete manual for the device Harbor Freight Tools 95082, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Harbor Freight Tools 95082 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Harbor Freight Tools 95082.

A complete Harbor Freight Tools manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Harbor Freight Tools 95082 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Harbor Freight Tools 95082, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Harbor Freight Tools 95082, that we can find in the current document
3. Tips how to use the basic functions of the device Harbor Freight Tools 95082 - which should help us in our first steps of using Harbor Freight Tools 95082
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Harbor Freight Tools 95082
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Harbor Freight Tools 95082 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Harbor Freight Tools 95082?

Use the form below

If you did not solve your problem by using a manual Harbor Freight Tools 95082, ask a question using the form below. If a user had a similar problem with Harbor Freight Tools 95082 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)