English dropdown-ico

Manual KitchenAid 2000495

12 pages 0.9 mb
Download

Go to site of 12

Summary
  • KitchenAid 2000495 - page 1

    I(ttchenAiid” Part No. 2000495 Rev. A 42” Built-In Refrigerator IMPORTANT: Installer: Leave Installation Instructions with the Homeowner. Homeowner: Keep Installation Instructions for future reference. Save Installation Instructions for = local electrical inspector’s use. x IMPORTANTk Read and save these instructions. ...

  • KitchenAid 2000495 - page 2

    Before you start... Proper installation is your responsibility. Make sure you have everything necessary for correct installation. It is the responsibility of the installer to comply with the installation specifications provided. The built-in refrtgerator weighs over 500 pounds. The floor must be sturdy enough to support this weight plus the additio ...

  • KitchenAid 2000495 - page 3

    Dimensions for built-in area Personal Injury/Property Damage Hazard . Unit is top-heavy and may tip forward when the doors are opened. l A solid soffit or 2” wood block is required above the refrigerator to prevent tipping during use. . If solid soffit is more than 1 inch above refrigerator, a wood block must be installed on the wall not more tha ...

  • KitchenAid 2000495 - page 4

    -. Product dimensions Levelers extended l/8” below rollers top of housing to lop of grille - See page 6. 118” min. -with 7-l/2” grille l-1/8” max. -with 8-l/2” grille - 24 7/V’- I- 23-118” - .l/2’ recessed height 03-516” height with 8-l/2” grille’ 83-118” height with 8” grille 82-S/8” height with 7-112” grille I Height ...

  • KitchenAid 2000495 - page 5

    Custom door panels, handle inserts and top grille panels Door and top gn’lle panels: Dimensions shown are with routed edges. Routing is required if panels are more than l/4” thick. Freezer door panels Maximum weight of cuslom panels is 30 pounds. The weight of decorative panels MUST NOT exceed the weights specified for each panel. Panels weighi ...

  • KitchenAid 2000495 - page 6

    -. Product dimensions +/- I/W tolerance protruding door inslallalion 23-7/&T’ depth flush door inslallalion spacers 1. Attach three spacers from the miscellaneous parts bag to the top, middle and bottom of each side of the refrigerator. Spacers are required for ventilation. - 42” - side panel support nailer b I 25” 2. A side panel support ...

  • KitchenAid 2000495 - page 7

    Electrical requirements Electrical Shock Hazard l Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service technician If you are in doubt as to whether the appliance is properly grounded. l Do Not use an extension cord with this appliance. Such use may result in ...

  • KitchenAid 2000495 - page 8

    Product support A solid soffit or a wood block is required to prevent the refrigerator from tipping forward after it is installed. Determine what height the refrigerator will be when it is installed to fit opening. Determine the height to the top of the cover at the final installed height you plan to use. Personal injury/Property Damage Hazard l Un ...

  • KitchenAid 2000495 - page 9

    Now start... Remove top grille assembly package, literature package and parts bag taped to the refrigerator door and save. Product Damage Do Not lower refrigerator against shipping base when removing the shipping base. Lowering the refrigerator against the shipping base could damage the components on the bottom of the refrigerator. Floor Damage Kee ...

  • KitchenAid 2000495 - page 10

    3-prong aroundina tvDe retainer /7 Remove tape from rear n leveling rods. Turn the two leveling rods clockwise using a 5/l 6” socket and ratchet until the cabinet weight is supported by the rear legs. Use l-3/8” open end wrench to lower the front leveling legs until the weight of the cabinet is supported by legs. 15 Move refrigerator close to f ...

  • KitchenAid 2000495 - page 11

    set m-l Remove two nuts from one end ot the top panel n frame. Remove end piece. Slide decorative panel into panel frame. Replace end piece using nuts. El Check that . top grille is aligned with top trim on cabinet. Use six screws to tighten top grille frame to retrigarator. Check that the power switch is in the “ON” position. Attach top grille ...

  • KitchenAid 2000495 - page 12

    If built-in refrigerator does not operate... Check that the circuit breaker is not tripped or house fuse blown. Check that power supply cord is plugged into wall receptacle. A more detailed troubleshooting checklist is provided in the Use and Care Guide. Part No. 2000495 Rev. A 0 1992 KilchenAid If you need assistance... The KitchenAid Consumer Ass ...

Manufacturer KitchenAid Category Refrigerator

Documents that we receive from a manufacturer of a KitchenAid 2000495 can be divided into several groups. They are, among others:
- KitchenAid technical drawings
- 2000495 manuals
- KitchenAid product data sheets
- information booklets
- or energy labels KitchenAid 2000495
All of them are important, but the most important information from the point of view of use of the device are in the user manual KitchenAid 2000495.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals KitchenAid 2000495, service manual, brief instructions and user manuals KitchenAid 2000495. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product KitchenAid 2000495.

Similar manuals

A complete manual for the device KitchenAid 2000495, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use KitchenAid 2000495 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of KitchenAid 2000495.

A complete KitchenAid manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual KitchenAid 2000495 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the KitchenAid 2000495, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the KitchenAid 2000495, that we can find in the current document
3. Tips how to use the basic functions of the device KitchenAid 2000495 - which should help us in our first steps of using KitchenAid 2000495
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with KitchenAid 2000495
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of KitchenAid 2000495 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning KitchenAid 2000495?

Use the form below

If you did not solve your problem by using a manual KitchenAid 2000495, ask a question using the form below. If a user had a similar problem with KitchenAid 2000495 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)