English dropdown-ico

Manual Ryobi HD1800M

18 pages 0.8 mb
Download

Go to site of 18

Summary
  • Ryobi HD1800M - page 1

    Your new hammer drill has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation, and operator safety. When properly cared for, the hammer drill will give you years of rugged, trouble-free performance. W ARNING: To reduce the risk of injury, the user must read and understand the operator’s manual befor ...

  • Ryobi HD1800M - page 2

    2 INTRODUCTION ■ Introduction ................................................................................................................................................................ 2 ■ General Safety Rules ........................................................................................................... ...................... ...

  • Ryobi HD1800M - page 3

    3 GENERAL SAFETY RULES W ARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in elec- tric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS WORK AREA ■ Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. ■ Do not operate power tools i ...

  • Ryobi HD1800M - page 4

    4 SPECIFIC SAFETY RULES ■ Hold tool by insulated gripping surfaces when performing an operation where the tool may contact hidden wiring. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator. ADDITIONAL SAFETY RULES ■ Know your power tool. Read operator ’ s manual carefully . Learn its app ...

  • Ryobi HD1800M - page 5

    5 SPECIFIC SAFETY RULES CHARGER RULES ■ Before using battery charger, read all instructions and cautionary markings in this manual, on bat- tery charger, and product using battery charger. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. ■ To reduce risk of injury, charge only nickel-cad- mium type r ...

  • Ryobi HD1800M - page 6

    6 Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power min Minutes Time Direct ...

  • Ryobi HD1800M - page 7

    7 SPECIFICA TIONS UNP ACKING INSTRUCTIONS Your hammer drill has been shipped completely assembled. ■ Carefully remove the tool and accessories from the box. ■ Make sure that all items listed in the packing list are included. ■ Inspect the tool carefully to make sure no breakage or damage occurred during shipping. ■ Do not discard the packin ...

  • Ryobi HD1800M - page 8

    8 Before using the hammer drill, familiarize yourself with all operating features and safety requirements. However, do not let familiarity with the tool make you careless. W ARNING: Exercise caution when using the hammer drill. Care- less actions, for even a fraction of a second, can result in serious personal injury. Your new hammer drill is equip ...

  • Ryobi HD1800M - page 9

    9 FEA TURES Fig. 1 20 5 TRIGGER SWITCH BA TTERY P ACK TWO SPEED GEAR TRAIN (HI-LO) DIRECTION OF ROT A TION SELECTOR (FORW ARD/REVERSE) KEYLESS CHUCK BIT STORAGE AREA LEVEL MODE SELECTOR TORQUE ADJUSTMENT RING AUXILIARY HANDLE DEPTH GAGE ROD WING SCREW END VIEW OF LEVEL FOR VERTICAL DRILLING TOP VIEW OF LEVEL FOR HORIZONT AL DRILLING LEVEL MAG TRA Y ...

  • Ryobi HD1800M - page 10

    10 20 5 ADJUSTMENTS W ARNING: The hammer drill should never be connected to a power supply when you are assembling parts, making adjustments, cleaning, performing maintenance, or when the tool is not in use. Disconnecting the tool will prevent accidental starting that could cause serious injury. ADJUSTING THE AUXILIARY HANDLE ASSEMBLY See Figure 2. ...

  • Ryobi HD1800M - page 11

    11 20 24 5 ADJUSTMENTS ADJUSTING THE TORQUE See Figure 5. The hammer drill is equipped with an adjustable torque clutch for driving different types of screws into different materials. Adjust the torque as necessary. We recommend that you use carbide-tipped bits and select hammer mode when drilling in hard materials such as brick, tile, concrete, et ...

  • Ryobi HD1800M - page 12

    12 ADJUSTMENTS INSERTING BITS See Figure 7. Follow these steps to insert bits. ■ Lock the trigger switch by placing the rotation selector in the center position. ■ Position the chuck jaws so that the opening is slightly larger than the drill bit you intend to use. Note: To open the chuck jaws, turn the chuck sleeve counterclockwise. To close th ...

  • Ryobi HD1800M - page 13

    13 OPERA TION W ARNING: Always wear safety goggles or safety glasses with side shields when operating this tool. Failure to do so could result in dust, shavings, or loose particles being thrown into your eyes, resulting in possible serious injury. W ARNING: Batteries vent hydrogen gas and can explode in the presence of a source of ignition, such as ...

  • Ryobi HD1800M - page 14

    14 OPERA TION INSTALLING THE BATTERY PACK See Figure 11. Follow these steps to install the battery pack. ■ Lock the trigger switch by placing the rotation selector in the center position. ■ Place the battery pack on the tool. ■ Make sure the latches on each side of the battery pack snap into place and the battery pack is secured on the tool b ...

  • Ryobi HD1800M - page 15

    15 2 0 15 OPERA TION USING THE LEVELS See Figure 13. T wo levels are recessed in the motor housing of the hammer drill. One is located on top, while the other is located on the end. They can be used to keep drill bits level during both horizontal and vertical drilling operations. DRILLING See Figure 13. Follow these steps to drill. ■ Secure the m ...

  • Ryobi HD1800M - page 16

    16 MAINTENANCE W ARNING: When servicing use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause product damage. W ARNING: The hammer drill should never be connected to a power supply when you are assembling parts, making adjustments, cleaning, performing maintenance, or when the tool is not in use. Disconnect ...

  • Ryobi HD1800M - page 17

    17 MAINTENANCE REMOVING THE CHUCK See Figures 14, 15, and 16. Follow these steps to remove the chuck. ■ Lock the trigger switch by placing the rotation selec- tor in the center position. ■ Insert a 5/16 inch or larger hex key wrench into the chuck of the drill and tighten the chuck jaws securely. ■ Tap the hex key wrench sharply with a mallet ...

  • Ryobi HD1800M - page 18

    983000-196 3-03 R YOBI TECHNOLOGIES INC. 1428 Pearman Dairy Road Anderson, SC 29625 Post Office Box 1207 Anderson, SC 29622 www .ryobitools.com 1-800-525-2579 CUSTOMER SER VICE INFORMA TION For parts or service, contact your nearest Ryobi authorized service center. Be sure to provide all relevant information when you call or visit. For the location ...

Manufacturer Ryobi Category Drill

Documents that we receive from a manufacturer of a Ryobi HD1800M can be divided into several groups. They are, among others:
- Ryobi technical drawings
- HD1800M manuals
- Ryobi product data sheets
- information booklets
- or energy labels Ryobi HD1800M
All of them are important, but the most important information from the point of view of use of the device are in the user manual Ryobi HD1800M.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Ryobi HD1800M, service manual, brief instructions and user manuals Ryobi HD1800M. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Ryobi HD1800M.

Similar manuals

A complete manual for the device Ryobi HD1800M, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Ryobi HD1800M by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Ryobi HD1800M.

A complete Ryobi manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Ryobi HD1800M - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Ryobi HD1800M, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Ryobi HD1800M, that we can find in the current document
3. Tips how to use the basic functions of the device Ryobi HD1800M - which should help us in our first steps of using Ryobi HD1800M
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Ryobi HD1800M
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Ryobi HD1800M in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Ryobi HD1800M?

Use the form below

If you did not solve your problem by using a manual Ryobi HD1800M, ask a question using the form below. If a user had a similar problem with Ryobi HD1800M it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)