English dropdown-ico

Manual Pioneer RS-232

22 pages 0.36 mb
Download

Go to site of 22

Summary
  • Pioneer RS-232 - page 1

    RS-232 Command Reference Manual For PIONEER PDP-505CMX Plasma Display Panel January 2006 Document Version 1.0 Product specifications and f unctions subject to change. Please check with your authoriz ed Pioneer dealer or distributor. ...

  • Pioneer RS-232 - page 2

    2 RS-232C Adjustment Mode 1 . 0 RS-232C Adjustment Mode This display panel has an RS-232C terminal. It is possible to use a PC to make adjustments and settings. 1 .1 About the RS-232C Adjustment Mode 1) Adjustments in the RS-232C adjustment mode: • The adjustments are written to the same memory area as for the integrator mode. Refer to section 5. ...

  • Pioneer RS-232 - page 3

    3 RS-232C Adjustment Mode 1 .2 Interface 1) Connector D-sub 9 pins (male) 2) Pin layout 3) Baud Rate 9600 bps (standard) (switch-able to 1200, 2400, 4800, 19200, 38400 bps) Note The panel's baud rate should be set to match the computer's baud rate. Also, when extending the RS-232C cable over a long distance, lower the baud rate. 4) Data f ...

  • Pioneer RS-232 - page 4

    4 RS-232C Adjustment Mode 1 .3 ID Assignment After connecting to a computer, the PC can assign an ID for each plasma display panel. Commands: <IDC> (ID CLEAR) ........ Clears the assigned ID <IDS> (ID SET) ............. Assigns an ID IDS is only effective when an ID is not assigned. Also, IDs are set starting from the set closest to the ...

  • Pioneer RS-232 - page 5

    5 1 .4 Combination Connection When performing control and adjustment, it is easiest to connect several panels to one PC. By performing a combination connection and assigning IDs to the displays, it is possible to control and adjust several panels at the same time or separately. Connection method: Connect the panels as shown below. Control and adjus ...

  • Pioneer RS-232 - page 6

    6 Under the connection conditions shown below, up to 16 panels can be controlled and operated. Conditions: 1 Length of RS-232C cable connecting PC to PDP-505CMX/PDP-50MXE10/PDP-50MXE11/PDP-504CMX/ PDP-50MXE1/PDP-50MXE1-S/PDP-434CMX/PDP-43MXE1/PDP-43MXE1-S: 5 m 2 Combination cable length: 5 m each 3 Wire specifications for linking cable: Mini Din 6- ...

  • Pioneer RS-232 - page 7

    7 RS-232C Adjustment Mode 1 .5 List of RS-232C Commands How to read this Table • RS-232C adjustment validity : Indicates whether the RS-232C adjustment mode can be used • Normal validity : Indicates whether the normal-operation mode can be used • Numerical direct validity : With a 3-digit number attached to the end of a command, the command d ...

  • Pioneer RS-232 - page 8

    8 RS-232C Adjustment Mode CTR CTI: ### Displays the current CTI setting. ¶ CTRS00 CTI: OFF Sets CTI to OFF. ‡ CTRS01 CTI: ON Sets CTI to ON. ‡ [D] DIN Turns OFF the OSD display. ‡‡ DIY OSD: ON Turns ON the OSD display. ‡‡ DNR DNR: ###### Displays the current DNR setting. ¶ DNRS00 DNR: OFF Sets digital NR to ON. ‡ DNRS01 DNR: LOW Set ...

  • Pioneer RS-232 - page 9

    9 RS-232C Adjustment Mode GRA GRADATION: ####### Displays the current GRADATION setting ¶ GRAS01 GRADATION: GAMMA 2.0 Sets GRADATION to ‘ GAMMA 2.0 ’ . ‡ GRAS02 GRADATION: GAMMA 1.8 Sets GRADATION to ‘ GAMMA 1.8 ’ . ‡ GRAS03 GRADATION: GAMMA 2.2 Sets GRADATION to ‘ GAMMA 2.2 ’ . ‡ GRAS04 GRADATION: DRE MID Sets GRADATION to ‘ D ...

  • Pioneer RS-232 - page 10

    10 RS-232C Adjustment Mode MIR MIRROR MODE: ### Displays the current MIRROR MODE setting. ¶ MIRS00 MIRROR MODE: OFF Turns the MIRROR MODE OFF (normal display). ‡ MIRS01 MIRROR MODE: X Sets the MIRROR MODE to left-right reversal. ‡ MIRS02 MIRROR MODE: Y Sets the MIRROR MODE to up-down reversal. ‡ MIRS03 MIRROR MODE: XY Sets the MIRROR MODE to ...

  • Pioneer RS-232 - page 11

    11 RS-232C Adjustment Mode SSI ######### Displays the current sub screen input function. ¶¶ SSIS01 INPUT1(SUB) Switches the sub screen to INPUT1. ‡‡ SSIS02 INPUT2(SUB) Switches the sub screen to INPUT2. ‡‡ SSIS03 INPUT3(SUB) Switches the sub screen to INPUT3. ‡‡ SSIS04 INPUT4(SUB) Switches the sub screen to INPUT4. ‡‡ SSIS05 INPUT ...

  • Pioneer RS-232 - page 12

    12 RS-232C Adjustment Mode 1 .6 GET Commands What are GET commands? • GET commands are for outputting TXD such as adjustment data from the internal microcomputer of the plasma display to a PC. • Adjustment data and other information is output as ASCII code. Note Command names are given inside brackets < >. • Data output format Notes • ...

  • Pioneer RS-232 - page 13

    13 RS-232C Adjustment Mode 2) <GPI> (GET PICTURE DATA: Gets integrator/PICTURE data.) Order Data contents Size Remarks 1 CONTRAST 3 Byte # 2 BRIGHTNESS 3 Byte # 3 C. DETAIL R (RED) 3 Byte # 4 C. DETAIL Y (YELLOW) 3 Byte # 5 C. DETAIL G (GREEN) 3 Byte # 6 C. DETAIL C (CYAN) 3 Byte # 7 C. DETAIL B (BLUE) 3 Byte # 8 C. DETAIL M (MAGENTA) 3 Byte ...

  • Pioneer RS-232 - page 14

    14 RS-232C Adjustment Mode 5) <GSS> (GET STATUS SETUP: Gets menu and integrator SETUP data.) Order Data contents Size Output Remarks 1 GRADATION 1 Byte 1: GAMMA 2.0 2: GAMMA 1.8 # 3: GAMMA 2.2 4: DRE MID 5: DRE HIGH 6: DRE LOW 7: HIGH CNT. 2 BRT.ENHANCE 1 Byte 0: OFF 1: ON # 3 SUB VOLUME 2 Byte 00 to 20 4 COLOR TEMP. 1 Byte 1: LOW 2: MID LOW ...

  • Pioneer RS-232 - page 15

    15 RS-232C Adjustment Mode 6) <GSO> (GET STATUS OPTION: Gets menu and integrator OPTION data.) Order Data contents Size Output Remarks 1 ENERGY SAVE 1 Byte 1: STANDARD 2: MODE 1 3: MODE 2 4: MODE 3 5: AUTO 2 ORBITER 1 Byte 0: OFF 1: ON 3 MASK CONTROL 1 Byte 0: OFF 1: ON 4 AUDIO OUT 1 Byte 1: FIXED 2: VARIABLE 5 SCREEN MASK 1 Byte 0: OFF 2: IN ...

  • Pioneer RS-232 - page 16

    16 RS-232C Adjustment Mode 7 Check Sum The Check Sum is data to which 2-Byte ASCII code is added to a data group that is returned by a GET command. STX 02 (hex) 2 Byte 3 Byte 03 (hex) ID GET command ETX STX 02 (hex) GET command 3 Byte Data *Byte Check sum 2 Byte ETX 03 (hex) PC side Set side . Example) Check Sum value that is added when the GET com ...

  • Pioneer RS-232 - page 17

    17 Screen Burning 2.0 Screen Burning When the same image is shown for a long time (still image, telop, etc.), the image is burned into to screen and may not be able to be removed. Manage this situation by making necessary changes in the video software, projection method, system configuration, etc. This display panel has a function to reduce and/or ...

  • Pioneer RS-232 - page 18

    18 3.0 Precautions on Connecting Camera Images Connecting and using moving images that are nearly still, such as images from a surveillance camera, could damage the panel, reduce the life, or be the cause of other malfunctions. In this case, it is necessary to set the image quality beforehand. For instructions on setting the image quality, contact ...

  • Pioneer RS-232 - page 19

    19 4.0 Precautions 1) If the power shuts down and stays OFF for a long period of time, an internal problem may have occurred (broken part, etc.). Turn OFF the main power switch on the plasma display then wait 1 to 2 minutes and try turning the power ON again. If the power goes OFF again, the display requires service. If the display operates normall ...

  • Pioneer RS-232 - page 20

    20 Maintenance Name Part Number Cleaning cloth: Wiping cloth AED1197 Cleaning cloth: Minimax GED-009 Cleaning liquid: B4 GEM1004 1) Always unplug the power cord from the power outlet before performing maintenance . 2) Cabinet and Remote-control Unit Never use solvents such as benzene or thinner to clean the unit. Using such solvents could cause the ...

  • Pioneer RS-232 - page 21

    (this page intentionally left black) ...

  • Pioneer RS-232 - page 22

    RS-232 Command Reference Manual For PIONEER PDP-505CMX Plasma Display Panel Pioneer Electronics (USA) Inc. 2265 East 220 th Street Long Beach, CA 90810 Corporate Website: www.pioneerelectronics.com Industrial Plasma Website: www.pion eerindustrialav.com ...

Manufacturer Pioneer Category Flat Panel Television

Documents that we receive from a manufacturer of a Pioneer RS-232 can be divided into several groups. They are, among others:
- Pioneer technical drawings
- RS-232 manuals
- Pioneer product data sheets
- information booklets
- or energy labels Pioneer RS-232
All of them are important, but the most important information from the point of view of use of the device are in the user manual Pioneer RS-232.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Pioneer RS-232, service manual, brief instructions and user manuals Pioneer RS-232. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Pioneer RS-232.

Similar manuals

A complete manual for the device Pioneer RS-232, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Pioneer RS-232 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Pioneer RS-232.

A complete Pioneer manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Pioneer RS-232 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Pioneer RS-232, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Pioneer RS-232, that we can find in the current document
3. Tips how to use the basic functions of the device Pioneer RS-232 - which should help us in our first steps of using Pioneer RS-232
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Pioneer RS-232
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Pioneer RS-232 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Pioneer RS-232?

Use the form below

If you did not solve your problem by using a manual Pioneer RS-232, ask a question using the form below. If a user had a similar problem with Pioneer RS-232 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)