English dropdown-ico

Manual Sony MDS-PC3 M-crew

62 pages 4.06 mb
Download

Go to site of 62

Summary
  • Sony MDS-PC3 M-crew - page 1

    MDS-PC3 SPECIFICA TIONS SERVICE MANUAL MINIDISC DECK Model Name Using Similar Mechanism MDS-JE640 MD Mechanism T ype MDM-7A Optical Pick-up T ype KMS-260B/J1N US Model Canadian Model AEP Model UK Model E Model US and foreign patents licensed f orm Dolby Laboratories Licensing Corporation. Photo: SIL VER System MiniDisc digital audio system Disc Min ...

  • Sony MDS-PC3 M-crew - page 2

    2 SELF-DIA GNOSIS FUNCTION The self-diagnosis function consists of error codes for customers which are displayed automatically when er rors occur, and erro r codes whic h show the error history in the test mode dur ing servicing. For details on ho w to view error codes for the customer , refer to the follo wing box in the instruction manual. For de ...

  • Sony MDS-PC3 M-crew - page 3

    3 1. While pressing the AMS knob and x / Z button, connect the po wer plug to the outlet, and release the AMS knob and x / Z b utton. When the test mode is set, “ [Check] ” will be displayed. 2. Rotate the AMS knob and w hen “ [Service] ” is displayed, press the @/1 b utton. 3. Rotate the AMS knob and display “ Err Displa y ” . 4. Press ...

  • Sony MDS-PC3 M-crew - page 4

    4 Description T ABLE OF CONTENTS 1. SER VICING NO TES ............................................. 5 2. GENERAL ........................................................................ 11 3. DISASSEMBL Y 3-1. Case (U) .............................................................................. 14 3-2. MD Mechanism Deck (MDM-74) ................. ...

  • Sony MDS-PC3 M-crew - page 5

    5 SECTION 1 SER VICE NO TES This appliance is classified as a CLASS 1 LASER product. The CLASS 1 LASER PR ODUCT MARKING is located on the rear exterior . Laser component in this product is capable of emitting radiation exceeding the limit for Class 1. CA UTION Use of controls or adjustments or performance of procedures other than those specified he ...

  • Sony MDS-PC3 M-crew - page 6

    6 JIG FOR CHECKING BD BO ARD W A VEFORM The special jig (J-2501-196-A) is useful for checking the wa veform of the BD board. The names of terminals and the c hecking ite ms to be performed are sho wn as follows. GND : Ground I+3V : For measuring Iop (Check the deterioration of the optical pick-up laser) Iop : For measuring Iop (Check the deteriorat ...

  • Sony MDS-PC3 M-crew - page 7

    7 Iop D A T A RECORDING AND DISPLA Y WHEN OPTICAL PICK-UP AND NON-V OLA TILE MEMOR Y (IC195 OF BD BO ARD) ARE REPLA CED The Iop value labeled on the optical pick-up can be recorded in the non-v olatile memory . By recording the value, it will elimin ate the need to look at the value on the label of the optical pic k-up. When replacing the optical p ...

  • Sony MDS-PC3 M-crew - page 8

    8 CHECKS PRIOR TO PAR TS REPLA CEMENT AND ADJUSTMENTS Before performing repairs, perform the follo wing checks to determine the faulty locations up to a certain extent. Details of the procedures are described in “5 Electrical Adjustments”. • 5-6-2. Laser po wer check (see page 27) • 5-6-3. Iop Compare (see page 27) • 5-6-4. Auto Check (se ...

  • Sony MDS-PC3 M-crew - page 9

    9 RETR Y CA USE DISPLA Y MODE • In this test mode, the causes for retry of the unit during recording can be displayed on the indication v essel. During playbac k, the “track mode” for obtaining track information will be set. This is useful for locating the faulty part of the unit. • The follo wing will be displayed : During recording and st ...

  • Sony MDS-PC3 M-crew - page 10

    10 He xadecimal Bit Binar y Higher Bits Lower Bits 84218421 b7 b6 b5 b4 b3 b2 b1 b0 00000001 00000010 00000100 00001000 00010000 00100000 01000000 10000000 He xa- decimal Details 01 02 04 08 10 20 40 80 Emphasis OFF Monaural This is 2-bit display . Normall y 01. 01:Normal audio. Others:Inv alid Audio (Normal) Original Copyright Write prohibited Whe ...

  • Sony MDS-PC3 M-crew - page 11

    11 SECTION 2 GENERAL This section is extracted from instruction manual. 4 Location and Function of P ar ts Front Panel Parts Description This chapter tells you about the location and function of the various buttons and controls on the front panel and the supplied remote. Further details are provided on the pages indicated in the parentheses. It als ...

  • Sony MDS-PC3 M-crew - page 12

    12 6 Using the Display The display window shows information about the MD or track. This section describes the information that appears for each deck status. DISPLA Y – + ?/1 Z N Xx .> z mM Note The type of information (e.g., total number of tracks, recorded time, remaining time, track or disc name) which was last displayed will continue to app ...

  • Sony MDS-PC3 M-crew - page 13

    13 9 Getting Star ted Hooking Up The MD deck can be connected to PCs with PC LINK capability (such as the V AIO-series of PCs), peripheral devices such as portable CD players, and active speakers. Make sure all devices are turned off before you hook them up. ! DC IN 9V PHONES PC LINK DIGIT AL ANALOG (OPTICAL) (VARIABLE) IN OUT IN OUT OPTICAL OUT LI ...

  • Sony MDS-PC3 M-crew - page 14

    14 SECTION 3 DISASSEMBL Y 3-1. CASE (U) 3-2. MD MECHANISM DECK (MDM-7A) Note : Follo w the disassembly procedure in the numerical order giv en. 1 three screws (BVTP 3x10) 2 3 4 case (U) 1 three screws (BVTP 3x10) claws 2 two screws (+BVTTWH M3 3x10) 3 mechanism deck 2 two screws (+BVTTWH M3 3x10) 1 flat type wire (23 core) (CN102) 1 flat type wire ...

  • Sony MDS-PC3 M-crew - page 15

    15 3-3. MAIN BO ARD 3-4. O VER LIGHT HEAD (HR901), BD (MD) BO ARD 1 flat type wire (13 core) (CN103) 2 two screws (BVTP 3x8) 3 three screws (BVTP 3x8) 4 MAIN board 6 3 head, ov er light (HR901) 1 connector (CN104) 7 FLEXIBLE board (CN101) 8 BD (MD) board 2 screw (P 1.7x6) 5 two screws ( BTP 2x6 ) 4 Remov al the solders 4 Remov al the solders ...

  • Sony MDS-PC3 M-crew - page 16

    16 3-5. HOLDER ASSY 3-6. LO ADING MO T OR ASSY (M103) 2 claw 3 5 1 spring (holder), tension 6 holder assy 4 boss 4 boss 1 belt (loading) 2 two screws (PWH 1.7x2.5) 3 motor assy , loading (M103) ...

  • Sony MDS-PC3 M-crew - page 17

    17 4 slider (EJ) 6 slider 7 lev er (CHG) 8 lev er (head) 3 5 A 1 two screws (BTP 2x6) 2 guide (L) 0 motor assy , sled (M102) 9 two screws (PWH 1.7x2.5) Remev e the claw . Shift the slider in the arrow A direction. 2 screw (M 1.7), tapping 3 gear (SD) 6 two screws (K 2x6) 7 MAIN shaft 8 4 screw (BTP 2x6) 9 screw (P 1.7x6) 0 slider (SL) qa optical pi ...

  • Sony MDS-PC3 M-crew - page 18

    18 1 screw (M 1.7), tapping 2 motor assy , spindle (M101) 3-9. SPINDLE MO T OR ASSY (M101) ...

  • Sony MDS-PC3 M-crew - page 19

    19 SECTION 4 TEST MODE Function name &/1 button x/Z button AMS Left or Right knob Push u Function Cancel or mov e to top hierarchy Set Select Set submenu 4-1. PRECA UTIONS FOR USE OF TEST MODE • As loading related operations will be performed re gardless of the test mode operations being performed, be sure to check that the disc is stopped be ...

  • Sony MDS-PC3 M-crew - page 20

    20 Display A UTO CHECK Err Display TEMP ADJUST LDPWR ADJUST Iop Write Iop NV Save EF MO ADJUST EF CD ADJUST FBIAS ADJUST A G Set (MO) A G Set (CD) TEMP CHECK LDPWR CHECK EF MO CHECK EF CD CHECK FBIAS CHECK ScurveCHECK VERIFYMODE DETRK CHECK 0920 CHECK Iop Read Iop Compare ADJ CLEAR INFORMA TION CPLA Y1MODE CREC 1MODE Details Automatic self-diagnosi ...

  • Sony MDS-PC3 M-crew - page 21

    21 4-5-1. Operating the Continuous Playbac k Mode 1. Entering the continuous playback mode 1 Set the disc in the unit. (Whichev er recordable discs or discs for playback only are av ailable.) 2 Rotate the AMS knob and display “CPLA Y1MODE”(C34). 3 Press the @/1 button to change the display to “CPLA Y1 MID”. 4 When access completes, the disp ...

  • Sony MDS-PC3 M-crew - page 22

    22 Function PLA Y STOP FF FR SCROLL PLA YMODE DISPLA Y x/Z “ PGM ” x/Z REPEA T REC CLEAR TIME Contents Sets continuous playback when pressed in the STOP state. When pressed during continuous playback, the tracking servo turns ON/OFF . Stops continuous playback and continuous recording. The sled mov es to the outer circumference only when this i ...

  • Sony MDS-PC3 M-crew - page 23

    23 Servo OFF T racking servo ON Recording mode OFF CL V normal mode T racking offset cancel OFF Groove Low reflection CL V A CL V UNLOCK Contents When Lit When Off Display Servo ON Tracking serv o OFF Recording mode ON CL V low speed mode ABCD adjustment completed Tracking of fset cancel ON Tracking auto gain OK Focus auto gain OK Pit High reflecti ...

  • Sony MDS-PC3 M-crew - page 24

    24 SECTION 5 ELECTRICAL ADJUSTMENTS 5-1. PAR TS REPLACEMENT AND ADJUSTMENT If malfunctions caused by optical pick-up such as sound skipping are suspected, follow the following check. Chec k before replacement Other faults are suspected. Check the threading mechanism, etc. Start NG NG NG OK OK OK Laser Power Check 5-6-2. (See page 27) 5-6-3. (See pa ...

  • Sony MDS-PC3 M-crew - page 25

    25 5-6-4. Auto Check (See page 28) Start YES NO NO NO NO NO NO NO NO YES YES YES YES YES YES YES Replace IC195 Replace OP or IO195 Replace IC101, IC195, or D101 5-1 1. Iop NV SA VE (See page 31) Replace OP , IC190, or IC195 Replace OP , IC102, IC190, or IC195 Replace OP , IC101, IC151, or IC195 Replace OP Replace the spindle motor End adjustments A ...

  • Sony MDS-PC3 M-crew - page 26

    26 5-7. INITIAL SETTING OF ADJUSTMENT V ALUES 5-8. RECORDING OF Iop INFORMA TION 5-9. TEMP COMPENSA TION OFF SET ADJUST 5-10. LASER POWER ADJUSTMENT 5-11. Iop NV SA VE 5-12. TRA VERSE ADJUSTMENT 5-13. FOCUS BIAS ADJUSTMENT 5-16. AUTO GAIN ADJUSTMENT 5-6-4. Auto Check 5-2. PRECA UTIONS FOR CHECKING LASER DIODE EMISSION T o check the emission of the ...

  • Sony MDS-PC3 M-crew - page 27

    27 5-6. CHECKS PRIOR TO REP AIRS These checks are performed before replacing parts according to “approximate specifications” to determine the faulty loca tions. For details, refer to “Checks Prior to Parts Replacement and Adjust- ments” (See page 8). 5-6-1. T emperature Compensation Offset Check When performing adjustments, set the internal ...

  • Sony MDS-PC3 M-crew - page 28

    28 8. Press the @/1 button display “EFB = MO-P”. Then, the optical pick-up moves to the pit area automatically and servo is imposed. 9. Observe the waveform of the oscilloscope, and check that the specified v alue is satisfied. Do not rota te the AMS knob . (T rav erse W av eform) Checking Procedur e: 1. Connect an oscilloscope to CN105 pin 4 ( ...

  • Sony MDS-PC3 M-crew - page 29

    29 5-6-8. C PLA Y Check MO Error Rate Chec k Checking Procedur e : 1. Load a continuously recorded test disc (MD W -74/GA-1). (Refer to “5-5. Using the Continuously Recorded Disc”.) 2. Rotate the AMS knob and display “CPLA Y1MODE” (C34). 3. Press the @/1 button and displa y “CPLA Y1 MID”. 4. The display changes to “C = AD = )”. 5. I ...

  • Sony MDS-PC3 M-crew - page 30

    30 5-7. INITIAL SETTING OF ADJUSTMENT VALUE Note: Mode which sets the adjustment results recorded in the non-v ola- tile memory to the initial setting v alue. Howe ver the results of the temperature compensation offset adjustment will not c hange to the initial setting v alue. If initial setting is performed, perform all adjustments again e x- clud ...

  • Sony MDS-PC3 M-crew - page 31

    31 KMS 260B 20101 H0576 Iop = 57.6 mA in this case Iop (mA) = Digital voltmeter reading (mV)/1 ( Ω ) 7. Then, rotate the AMS knob and display “LDPWR CHECK” (C13). 8. Press the @/1 button once and display “LD 0.9 mW $ ”. Check that the reading of the laser power meter become 0.85 to 0.91 mW . 9. Press the @/1 button once more and display ? ...

  • Sony MDS-PC3 M-crew - page 32

    32 10. Rotate the AMS knob until the wa veform of the oscilloscope mov es closer to the specified v alue. In this adjustment, wav eform varies at interv als of approx. 2%. Adjust the wa veform so that the specified v alue is satisfied as much as possible. (T rav erse W av ef or m) 11 . Press the @/1 button, and save the adjustment results in the no ...

  • Sony MDS-PC3 M-crew - page 33

    33 5-14. ERROR RA TE CHECK 5-14-1. CD Error Rate Chec k Checking Procedur e : 1. Load a check disc (MD) TD YS-1. 2. Rotate the AMS knob and display “CPLA Y1MODE” (C34). 3. Press the @/1 b utton twice and display “CPLA Y1 MID”. 4. The display changes to “C = AD = )”. 5. Check that the C1 error rate is belo w 20. 6. Press the x/Z button, ...

  • Sony MDS-PC3 M-crew - page 34

    34 NO TE: It is useful to use the jig. for checking the waveform. (Refer to Servicing Note on page 6.) [BD BO ARD] (SIDE B) D101 IC151 23 1 27 1 1 7 IC101 CN101 CN103 CN102 IC195 IC190 CN105 IC102 * NO TE 5-17. ADJUSTING POINTS AND CONNECTING POINTS [BD BO ARD] (SIDE A) ...

  • Sony MDS-PC3 M-crew - page 35

    35 35 SECTION 6 DIA GRAMS THIS NOTE IS COMMON FOR PRINTED WIRING BO ARDS AND SCHEMA TIC DIAGRAMS. (In addition to this, the necessary note is printed in each block.) For schematic diagrams. Note: • All capacitors are in µF unless otherwise noted. pF: µµF 50 WV or less are not indicated e xcept for electrolytics and tantalums. • All resistors ...

  • Sony MDS-PC3 M-crew - page 36

    MDS-PC3 36 36 6-1. BLOCK DIA GRAMS – BD SECTION – F C B D A E I J J I B A C D E F DETECTOR J I A B C D E F LD PD LASER DIODE ILCC PD OPTICAL PICK-UP (KMS-260B/J1N) AUTOMATIC POWER CONTROL Q121, 122 APC PD APCREF AT AMP B.P.F. WBL ADFM ADIN ADFG ABCD AMP ABCD FE TE SE F0CNT WBL 3T EQ COMMAND SWDT SCLK XLAT RFO RF AGC & EQ AGCI EQ RF RF AMP, ...

  • Sony MDS-PC3 M-crew - page 37

    MDS-PC3 37 37 – MAIN SECTION – 09 X550 45.1584MHz ROTARY ENCODER A/D, D/A CONVERTER IC500 SDTO ADDT DADT, BCK, LRCK SDTI (Page 36) A B LINE AMP IC502 MUTING Q170,270 MUTING CONTROL SWITCH Q100 REMOTE CONTROL RECEIVER IC781 D301 J180 PHONES AD/DA LATCH FLDT MUTE PDOWN AD/DA RESET FLCK FLCS IIC BUSY IIC DATA POWER(IIC) HIGH-PASS FILTER, DIGITAL A ...

  • Sony MDS-PC3 M-crew - page 38

    MDS-PC3 38 38 6-2. PRINTED WIRING BO ARD – BD SECTION – Ref. No. Location D101 A-4 Q101 B-1 Q131 C-1 Q132 B-1 Q133 B-1 Q134 C-1 • Semiconductor Location Ref. No. Location D181 D-3 D183 D-3 IC101 A-3 IC102 B-3 IC141 C-1 IC151 C-2 IC153 C-3 IC171 D-2 • Semiconductor Location Ref. No. Location There are a few cases that the part isn ’ t moun ...

  • Sony MDS-PC3 M-crew - page 39

    MDS-PC3 39 39 6-3. SCHEMA TIC DIA GRAM – BD SECTION (1/2) – • See page 35 f or Wavef orms. • See page 46 f or IC Block Diagrams. • See page 49 for IC Pin Functions. • See page 38 for Printed Wiring Board. 40 40 40 PIN FUNCTION ...

  • Sony MDS-PC3 M-crew - page 40

    MDS-PC3 40 40 6-4. SCHEMA TIC DIAGRAM – BD SECTION (2/2) – • See page 35 for Waveforms. • See page 46 for IC Block Dia grams. • See page 50 f or IC Pin Functions. • See page 38 f or Printed Wiring Board. 39 39 39 42 42 PIN FUNCTION ...

  • Sony MDS-PC3 M-crew - page 41

    MDS-PC3 41 41 6-5. PRINTED WIRING BOARD – MAIN SECTION – Ref. No. Location D155 C-4 D156 C-4 D255 C-4 D256 C-4 D301 B-1 D400 A-1 D402 B-3 D421 B-3 D422 B-3 IC300 C-2 IC301 C-4 IC400 B-2 IC401 B-1 IC402 B-4 IC420 C-1 • Semiconductor Location Ref. No. Location There are a few cases that the part isn’t mounted in model is printed on diagram. I ...

  • Sony MDS-PC3 M-crew - page 42

    MDS-PC3 42 42 6-6. SCHEMA TIC DIAGRAM – MAIN SECTION (1/2) – • See page 35 for Waveforms. • See page 41 for Printed Wiring Board. • See page 48 for IC Bloc k Diagrams. • See pa ge 53 for IC Pin Functions. PIN FUNCTON ...

  • Sony MDS-PC3 M-crew - page 43

    MDS-PC3 43 43 6-7. SCHEMA TIC DIAGRAM – MAIN SECTION (2/2) – • See page 35 for Waveforms. • See page 41 for Printed Wiring Boar d. • See page 47 f or IC Block Diagrams. ...

  • Sony MDS-PC3 M-crew - page 44

    MDS-PC3 44 44 6-8. PRINTED WIRING BO ARD – P ANEL SECTION – There are a few cases that the part isn ’ t mounted in model is printed on diagram. Ref. No. Location D751 A-6 Q701 A-6 Q751 A-6 • Semiconductor Location Ref. No. Location IC781 A-6 • Semiconductor Location • MAIN and P ANEL boards are lead free soldered (contains no lead). ...

  • Sony MDS-PC3 M-crew - page 45

    MDS-PC3 45 45 6-9. SCHEMA TIC DIAGRAM – P ANEL SECTION – • See page 35 for Wavef orms. ...

  • Sony MDS-PC3 M-crew - page 46

    46 46 6-10. IC BLOCK DIA GRAMS IC101 CXA2523AR (BD BOARD) –1 –2 + – IVR BB + – IVR AA + – IVR CC + – IVR DD + – IVR + – EE EE' EFB TESW PTGR 48 MORFO 47 MORFI 46 RFO 45 OPN 44 OPO 43 ADDC 42 COMPP 41 COMPO 40 AGCI 39 RF AGC 38 RF 37 PEAK 36 BOTM 35 ABCD 34 FE 33 AUX 32 ADFG 31 ADAGC 30 ADIN 29 ADFM 28 SE 27 CSLED 26 TE 25 WBLAD ...

  • Sony MDS-PC3 M-crew - page 47

    47 IC400 MAX1626ESA-TE2 (MAIN BO ARD) VCOM AINR AINL 2 1 3 VREF 4 TEST 7 XT AI 9 XT ALE 10 XT AO 8 SDTI 14 LRCK 11 BICK 12 SDTO 13 AGND 5 VA 6 A/D CONVERTER BLOCK D/A CONVERTER BLOCK CLOCK GENERA TOR & DIVIDER AUDIO INTERFACE CONTROLLER CDTI 15 CIF 18 CLKO 21 AOUTL+ 26 AOUTL– 25 DGND 24 VD 23 VT 22 AOUTR+ 28 AOUTR– 27 PD 19 M/S 20 CS 17 CCL ...

  • Sony MDS-PC3 M-crew - page 48

    48 IC420 M62016FP-E1 (MAIN BO ARD) IC503 BH3541F-E2 (MAIN BO ARD) IC800 P82B715TD .118 (MAIN BO ARD) + – + – 3 4 5 6 2 8 7 1 VCC NC NC NC RESET GND CD INT INTERRUPT SIGNAL GENERATOR RESET SIGNAL GENERATOR COM R1 R2 R3 R4 COM 5 8 7 BIAS MUTE 0dB VCC LOUT BIAS LIN 3 4 1 2 ROUT MUTE RIN VEE 0dB 180k 180k 6 GND NC NC VCC LCL SCL SDA LDA BUFFER BUFF ...

  • Sony MDS-PC3 M-crew - page 49

    49 6-11. IC PIN FUNCTIONS • IC101 CXA2523AR RF Amplifier (BD BO ARD) Pin No. Pin Name I/O Function I J VC A to F PD APC APCREF GND TEMPI TEMPR SWDT SCLK XLA T XSTBY F0CNT VREF EQADJ 3T ADJ Vcc WBLADJ TE CSLED SE ADFM ADIN ADAGC ADFG AUX FE ABCD BOTM PEAK RF RF AGC AGCI COMPO COMPP ADDC OPO OPN RFO MORFI MORFO I I O I I O I — I O I I I I I O I/O ...

  • Sony MDS-PC3 M-crew - page 50

    50 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 to 34 35 36 to 40 41 42 43 44 45 46 47 48 49 50, 51 • IC151 CXD2662R Digital Signal Processor , Digital Serv o Signal Processor (BD BO ARD) Function Pin No. Pin Name I/O MNT0 (FOK) MNT1 (SHCK) MNT2 (XBUSY) MNT3 (SLOC) SWDT SCLK XLA T SRDT SENS XRST SQSY DQSY RE ...

  • Sony MDS-PC3 M-crew - page 51

    51 Function Pin No. Pin Name I/O 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 to 98 99 100 MVCI ASYO ASYI A VDD BIAS RFI A VSS PCO FILI FILO CL TV PEAK BOTM ABCD FE AUX1 VC ADIO A VDD ADR T ADRB A VSS SE TE DCHG APC ADFG F0CNT XLRF CKRF DTRF APCREF TEST0 TRDR ...

  • Sony MDS-PC3 M-crew - page 52

    52 1 DA T A(FL) O Serial data signal output to the display driver 2 CLK(FL) O Serial clock signal output to the display driver L: Active 3 A1-IN I Fixed at H (Pull-up) 4 SIRCS I Remote control input 5, 6 NC — Not used 7 LED O LCD back light ON/lOFF signal output 8 MUTE O Mute signal output 9 A/D,D/A RESET O A/D, D/A (AK4524-TP) reset signal outpu ...

  • Sony MDS-PC3 M-crew - page 53

    53 58 SHCK (MNT1) I Track jump signal input from the CXD2662R 59 VCC — Power supply (+3.3V) 60 EEP-WP O EEP-ROM write protect signal output L: write possibility 61 SDA I/O Data signal input/output pin with the EEP-ROM 62 BUSCLK O Not used 63 OE O Not used 64 CASH O Not used 65 WE R/W O Write signal output 66 SCL O Clock signal output to the EEP-R ...

  • Sony MDS-PC3 M-crew - page 54

    54 7-1. CHASSIS SECTION 1 4-230-473-01 CASE(B) 2 7-685-647-79 SCREW+BVTP 3X10 TYPE2 N-S * 3 4-978-398-21 CUSHION 4 4-230-482-01 KNOB(AMS) 5 X-4953-181-1 PANELASSY , FRONT 6 4-230-848-71 LID (MD) 7 4-228-630-11 SPRING (LID), TENSION COIL 8 1-804-189-11 LIGHT , LCD BACK 11 1-757-134-11 WIRE(FLA T TYPE) (13 CORE) 12 4-951-620-01 SCREW (2.6X8), +BVTP 1 ...

  • Sony MDS-PC3 M-crew - page 55

    55 7-2. MECHANISM SECTION-1 (MDM-7A) Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks * 301 4-996-267-01 BASE (BU-D) 302 4-231-319-01 SCREW (2X6) CZN, +B (P) TRI 303 4-227-007-01 GEAR (SB) 304 4-227-025-01 BEL T (LOADING) 305 3-372-761-01 SCREW (M1.7), TAPPING 306 4-227-002-01 GEAR, PULLEY 307 4-226-999-01 LEVER (HEAD) 30 ...

  • Sony MDS-PC3 M-crew - page 56

    56 7-3. MECHANISM SECTION-2 (MDM-7A) Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 359 358 357 355 354 356 360 359 362 352 353 368 367 353 352 351 363 352 353 362 369 369 HR901 S102 M101 M103 M102 353 361 364 365 366 351 A-4725-054-A BDBOARD, COMPLETE 352 4-231-319-01 SCREW (2X6) CZN, +B (P) TRI 353 3-372-761-01 SCREW ...

  • Sony MDS-PC3 M-crew - page 57

    57 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks SECTION 8 ELECTRICAL P AR TS LIST A-4725-054-A BD BOARD, COMPLETE ****************** < CAP ACITOR > C101 1-135-259-11 T ANT AL. CHIP 10uF 20% 6.3V C102 1-135-259-11 T ANT AL. CHIP 10uF 20% 6.3V C103 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C104 1-164-227-11 CERAMIC ...

  • Sony MDS-PC3 M-crew - page 58

    58 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks IC171 8-759-096-87 IC TC7WU04FU(TE12R) IC181 8-759-481-17 IC MC74ACT08DTR2 IC190 8-759-460-72 IC BA033FP-E2 IC195 8-759-640-41 IC IC BR24C08F-E2 < JUMPER RESISTOR > JW201 1-216-295-11 SHORT 0 JW202 1-216-295-11 SHORT 0 JW203 1-216-295-11 SHORT 0 JW903 1-216-295-11 ...

  • Sony MDS-PC3 M-crew - page 59

    59 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < SWITCH > S101 1-762-596-21 SWITCH, PUSH (1 KEY) (LIMIT IN SW) S103 1-771-956-21 SWITCH, PUSH (1 KEY) (OUT SW) S104 1-771-955-21 SWITCH, PUSH (1 KEY) (PLA Y SW) S105 1-771-955-21 SWITCH, PUSH (1 KEY) (REC SW) ******************************************************* ...

  • Sony MDS-PC3 M-crew - page 60

    60 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks MAIN C611 1-164-156-11 CERAMIC CHIP 0.1uF 25V C613 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C661 1-164-156-11 CERAMIC CHIP 0.1uF 25V C662 1-104-665-11 ELECT 100uF 20% 10V C800 1-164-156-11 CERAMIC CHIP 0.1uF 25V C804 1-164-156-11 CERAMIC CHIP 0.1uF 25V C814 1-164-156-11 ...

  • Sony MDS-PC3 M-crew - page 61

    61 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R280 1-216-789-11 METAL CHIP 2.2 5% 1/16W R281 1-216-821-11 METAL CHIP 1K 5% 1/16W R301 1-216-864-11 METAL CHIP 0 5% 1/16W R302 1-216-864-11 METAL CHIP 0 5% 1/16W R303 1-216-864-11 METAL CHIP 0 5% 1/16W R304 1-216-864-11 METAL CHIP 0 5% 1/16W R305 1-216-864-11 METAL CHIP ...

  • Sony MDS-PC3 M-crew - page 62

    62 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks MDS-PC3 Sony Corporation Audio Entertainment Gr oup 9-929-545-11 2000J0971-1 Printed in Japan ©2000.10 Published by General Engineering Dept. < DIODE > D751 8-719-051-89 DIODE SML-010VT-T87 ( @/1 ) < IC > IC781 8-749-013-92 IC GP1UC7X (REMOTE SENSOR) < TR ...

Manufacturer Sony Category

Documents that we receive from a manufacturer of a Sony MDS-PC3 M-crew can be divided into several groups. They are, among others:
- Sony technical drawings
- MDS-PC3 M-crew manuals
- Sony product data sheets
- information booklets
- or energy labels Sony MDS-PC3 M-crew
All of them are important, but the most important information from the point of view of use of the device are in the user manual Sony MDS-PC3 M-crew.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Sony MDS-PC3 M-crew, service manual, brief instructions and user manuals Sony MDS-PC3 M-crew. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Sony MDS-PC3 M-crew.

Similar manuals

A complete manual for the device Sony MDS-PC3 M-crew, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Sony MDS-PC3 M-crew by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Sony MDS-PC3 M-crew.

A complete Sony manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Sony MDS-PC3 M-crew - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Sony MDS-PC3 M-crew, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Sony MDS-PC3 M-crew, that we can find in the current document
3. Tips how to use the basic functions of the device Sony MDS-PC3 M-crew - which should help us in our first steps of using Sony MDS-PC3 M-crew
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Sony MDS-PC3 M-crew
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Sony MDS-PC3 M-crew in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Sony MDS-PC3 M-crew?

Use the form below

If you did not solve your problem by using a manual Sony MDS-PC3 M-crew, ask a question using the form below. If a user had a similar problem with Sony MDS-PC3 M-crew it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)