English dropdown-ico

Manual MGE UPS Systems 1000C

28 pages 0.51 mb
Download

Go to site of 28

Summary
  • MGE UPS Systems 1000C - page 1

    51031604EN/AB - Page 1 Installation and user manual Pulsar EX tr eme 700C / 1000C / 1500C ...

  • MGE UPS Systems 1000C - page 2

    Page 2 - 51031604EN/AB Introduction Thank you for selecting an MGE UPS SYSTEMS product to protect your electrical equipment. The Pulsar EX treme range has been designed with the utmost care. We recommend that you take the time to read this manual to take full advantage of the many features of your UPS. MGE UPS SYSTEMS pays great attention to the en ...

  • MGE UPS Systems 1000C - page 3

    51031604EN/AB - Page 3 Safety Safety of persons Safety rules A UPS has its own internal power source (the battery). Consequently, the power outlets may be energised even if the UPS is disconnected from the AC-power source. Dangerous voltage levels are present within the UPS. It should be opened exclusively by qualified service personnel. The UPS mu ...

  • MGE UPS Systems 1000C - page 4

    Page 4 - 51031604EN/AB Foreword Using this document Important instructions that must always be followed. Information, advice, help. Visual indication. Action. Audio indication. In the illustrations on the following pages, the symbols below are used: LED off. LED on. LED flashing. Information may be found primarily by consulting: ◗ the contents, ? ...

  • MGE UPS Systems 1000C - page 5

    51031604EN/AB - Page 5 Contents 1. Presentation 1.1 Pulsar EX treme range ................................................................................................................. 7 T ower model .................................................................................................................................... 7 Rack model . ...

  • MGE UPS Systems 1000C - page 6

    Page 6 - 51031604EN/AB Contents 3.4 Personalisation (optional) ........................................................................................................... 19 Function ....................................................................................................................... ................. 19 "ON / OFF conditions& ...

  • MGE UPS Systems 1000C - page 7

    51031604EN/AB - Page 7 1. Presentation 1.1 Pulsar EX treme range Tower model Rack model EX1000 Rack EX treme 700C EX treme 1000C EX treme 1500C EX treme 700C EX treme 1000C EX treme 1500C Dimensions in mm (H x W x D) 235.5 x 145 x 400 235.5 x 145 x 505 Weight in kg 10 12 15 EX treme 700C Rack EX treme 1000C Rack EX treme 1500C Rack EX treme 700C Ra ...

  • MGE UPS Systems 1000C - page 8

    Page 8 - 51031604EN/AB 1 2 RS232 USB 1. Presentation 1.2 Back slot for communications-card option. RS232 communications port. USB communications port. four outlets for direct connection of protected equipment. connector for automatic detection of an additional battery module. input circuit breaker. socket for connection to AC-power source. connecto ...

  • MGE UPS Systems 1000C - page 9

    51031604EN/AB - Page 9 1 2 RS232 USB 1. Presentation 7 6 1 4 11 8 3 9 10 Rack model slot for communications-card option. RS232 communications port. USB communications port. four outlets for direct connection of protected equipment. connector for automatic detection of an additional battery module. input circuit breaker. 1 2 3 4 5 6 7 9 8 10 11 sock ...

  • MGE UPS Systems 1000C - page 10

    Page 10 - 51031604EN/AB 100% 80% 50% 20% test % % 1 2 bypass 1.3 Control panel Alarms UPS overload. electronics fault. battery fault. hold down to display percent load: - lamp test or buzzer OFF. - forced transfer to bypass and back by pressing button 3 times in less than 5 seconds. status of programmable outlet 1: operation on bypass (no backup po ...

  • MGE UPS Systems 1000C - page 11

    51031604EN/AB - Page 11 2. Installation 2.1 Unpacking and checks two cords for connection of the protected equipment. RS 232 communications cable. USB communications cable. "UPS Driver" diskette for UPS personalisation. "Solution Pac" CD ROM. documentation. 27 28 29 25 24 25 26 27 28 Tower model 26 24 29 ...

  • MGE UPS Systems 1000C - page 12

    Page 12 - 51031604EN/AB 2. Installation 27 28 30 24 Rack model 24 29 E X 1 0 0 0 R a c k 24 two cords for connection of the protected equipment. 25 RS 232 communications cable. 26 USB communications cable. 27 "UPS Driver" diskette for UPS personalisation. 28 "Solution Pac" CD ROM. 29 documentation. 30 telescopic rails for mounti ...

  • MGE UPS Systems 1000C - page 13

    51031604EN/AB - Page 13 2.2 Installation of the rack version 2. Installation Rack mounting diagram with rails. The rails and the necessary mounting hardware are supplied by MGE UPS SYSTEMS. 1 2 3 3 3 3 4 EX1000 Rack ...

  • MGE UPS Systems 1000C - page 14

    Page 14 - 51031604EN/AB 2. Installation 2.3 Connection to the RS 232 or USB communications port (optional) 1 - Connect the RS 232 25 or USB 26 communications cable to the serial port or the USB port on the computer. 2 - Connect the other end of the communications cable 25 or 26 to the RS 232 2 or USB 3 communications port on the UPS. The UPS can no ...

  • MGE UPS Systems 1000C - page 15

    51031604EN/AB - Page 15 1 2 RS232 USB 2.4 Installation of the communications-card option It is not necessary to shut down the UPS to install the communications card: 1 - Remove the slot 1 cover secured by two screws. 2 - Insert the card in the slot. 3 - Secure the card with the two screws. Tower model Rack model Slot for the communications-card opt ...

  • MGE UPS Systems 1000C - page 16

    Page 16 - 51031604EN/AB 2. Installation 2.5 Connections Check that the indications on the rating plate on the back of the UPS correspond to your AC-power system and to the actual electrical consumption of all the equipment to be connected to the UPS. 1 - Remove the power cord supplying the equipment to be protected. Check cord characteristics (> ...

  • MGE UPS Systems 1000C - page 17

    51031604EN/AB - Page 17 3. Operation 3.1 Start-up 100% 80% 50% 20% test % % 1 2 bypass The protected equipment connected to the UPS can be energised, whether AC input power is available or not. 12 13 14 23 Caution: the AC input power source must be present when energising for the first time. Press the ON / OFF button 23 . The buzzer beeps and all t ...

  • MGE UPS Systems 1000C - page 18

    Page 18 - 51031604EN/AB 3. Operation 3.3 Operation on battery power (following failur e of AC input power) 1 2 bypass 1 2 bypass test % 1 2 bypass 22 Transfer to battery power The AC-power source is outside tolerances, LED 23 is ON, the buzzer beeps three times. The equipment connected to the UPS is supplied by the battery. Threshold for the low-ba ...

  • MGE UPS Systems 1000C - page 19

    51031604EN/AB - Page 19 3. Operation 3.4 Personalisation (optional) Function Personalisable function Automatic start Cold start (battery power) Forced shutdown Sleep mode UPS ON / OFF via software Default setting Enabled Enabled Enabled Disabled Enabled Personalisation parameters can be set and modified using the "UPS Driver" software ins ...

  • MGE UPS Systems 1000C - page 20

    Page 20 - 51031604EN/AB 3. Operation bypass Personalisable function Rated UPS voltage Rated UPS frequency UPS tolerance for AC-power source frequency Overload alarm threshold UPS restart following short-circuit Default setting 230 V F = 50 Hz F ± 5% 1 10% Disabled Options 200 V - 210 V - 220 V - 240 V 60 Hz F ± 1% to ± 10%, in 1% steps 0 to 1 10 ...

  • MGE UPS Systems 1000C - page 21

    51031604EN/AB - Page 21 4. Maintenance 4.1 T roubleshooting Indication LED 12 flashes and the buzzer beeps. LED 14 flashes. The yellow LED 15 flashes, the red indicator light 10 behind the UPS comes on and the buzzer sounds continuously . Signification UPS overload. Overload is too long or too high. ◗ If AC power is present and within tolerances, ...

  • MGE UPS Systems 1000C - page 22

    Page 22 - 51031604EN/AB Troubleshooting requiring MGE UPS SYSTEMS after-sales support Indication LED 13 flashes and the buzzer sounds continuously. Signification UPS electronics have detected a UPS fault. Depending on the UPS personalisation parameters (see section 3.4), there are two possibilities: ◗ the equipment connected to the UPS continues ...

  • MGE UPS Systems 1000C - page 23

    51031604EN/AB - Page 23 A B A F G C D E 4.2 Replacement of the battery module 4. Maintenance Removal of battery module A - Press to open door. B - Slide the door open and remove it. C D E - Procedure to remove the protective cover. F - Disconnect the battery module. G - Remove the battery module. Tower model Safety rules: Batteries constitute a dan ...

  • MGE UPS Systems 1000C - page 24

    Page 24 - 51031604EN/AB E F 4. Maintenance B A Rack model Removal of battery module A - Remove the two screws securing the door. B - Slide the door open and remove it. C - Unscrew the bar that holds the battery module in place. D - Remove the bar. E - Disconnect the battery module. F - Remove the battery module. Reinstallation of the battery module ...

  • MGE UPS Systems 1000C - page 25

    51031604EN/AB - Page 25 5. Environment This product has been designed to respect the environment: It does not contain CFCs or HCFCs. UPS recycling at the end of service life: MGE UPS SYSTEMS undertakes to recycle, by certified companies and in compliance with all applicable regulations, all UPS products recovered at the end of their service life (c ...

  • MGE UPS Systems 1000C - page 26

    Page 26 - 51031604EN/AB 6. Appendices 6.1 T echnical characteristics Operating conditions Relative humidity: 20 to 90% without condensation. Temperature: 0 to 40 ° C. Simplified diagram ...

  • MGE UPS Systems 1000C - page 27

    51031604EN/AB - Page 27 6. Appendices 6.2 Glossary Authorised voltage range for Upper and lower voltage thresholds within which the UPS can operate on the automatic transfer to bypass if fault or bypass in the event of a UPS fault or overload. overload Automatic bypass Automatic switch controlled by the UPS, used to connect the equipment directly t ...

  • MGE UPS Systems 1000C - page 28

    Page 28 - 51031604EN/AB 6. Appendices 6.3 Index A AC power Failure .................................................................... 18 Frequency tolerance ............................................... 20 Return ..................................................................... 18 Automatic start ............................................ ...

Manufacturer MGE UPS Systems Category Power Supply

Documents that we receive from a manufacturer of a MGE UPS Systems 1000C can be divided into several groups. They are, among others:
- MGE UPS Systems technical drawings
- 1000C manuals
- MGE UPS Systems product data sheets
- information booklets
- or energy labels MGE UPS Systems 1000C
All of them are important, but the most important information from the point of view of use of the device are in the user manual MGE UPS Systems 1000C.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals MGE UPS Systems 1000C, service manual, brief instructions and user manuals MGE UPS Systems 1000C. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product MGE UPS Systems 1000C.

Similar manuals

A complete manual for the device MGE UPS Systems 1000C, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use MGE UPS Systems 1000C by users. Manuals are usually written by a technical writer, but in a language understandable to all users of MGE UPS Systems 1000C.

A complete MGE UPS Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual MGE UPS Systems 1000C - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the MGE UPS Systems 1000C, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the MGE UPS Systems 1000C, that we can find in the current document
3. Tips how to use the basic functions of the device MGE UPS Systems 1000C - which should help us in our first steps of using MGE UPS Systems 1000C
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with MGE UPS Systems 1000C
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of MGE UPS Systems 1000C in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning MGE UPS Systems 1000C?

Use the form below

If you did not solve your problem by using a manual MGE UPS Systems 1000C, ask a question using the form below. If a user had a similar problem with MGE UPS Systems 1000C it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)