English dropdown-ico

Manual Toshiba TLP X4100

48 pages 0.96 mb
Download

Go to site of 48

Summary
  • Toshiba TLP X4100 - page 1

    O WNER’S MANU AL 3LCD D A T A PR OJECT OR TLP-X4100U ...

  • Toshiba TLP X4100 - page 2

    SAFETY PRECA UTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triang ...

  • Toshiba TLP X4100 - page 3

    3 IMPOR T ANT SAFETY INSTR UCTIONS CAU TI ON: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards inc ...

  • Toshiba TLP X4100 - page 4

    4 IMPOR T ANT SAFETY INSTRUCTIONS 7. Cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 8. Power-Cord Protection Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying partic ...

  • Toshiba TLP X4100 - page 5

    S3125A 5 IMPOR T ANT SAFETY INSTRUCTIONS 13. Stack Inhibited Do not stack other equipment on this product or do not place this product on the other equipment. Top and bottom plates of this product develops heat and may give some undesirable damage to other unit. 14. Attachments Do not use attachments not recommended by the product manufacturer as t ...

  • Toshiba TLP X4100 - page 6

    6 IMPOR T ANT SAFETY INSTRUCTIONS 19. Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. (Replacement of the lamp only sho ...

  • Toshiba TLP X4100 - page 7

    7 CONNECTING A C PO WER CORD NO TE ON PO WER CORD AC Power Cord must meet requirement of country where you use a projector. Confirm an AC plug type with chart below and proper AC Power Cord must be used. If supplied AC Power Cord does not match your AC outlet, contact your sales dealer. To POWER CORD CONNECTOR on your projector. Pr ojector side AC ...

  • Toshiba TLP X4100 - page 8

    T ABLE OF CONTENTS TRADEMARKS ● Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer,Inc. ● IBM and PS/2 are trademarks or registered trademarks of International Business Machines, Inc. ● Windows and PowerPoint are registered trademarks of Microsoft Corporation. ● Each name of corporations or products in ...

  • Toshiba TLP X4100 - page 9

    9 FEA TURES AND DESIGN This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ◆ Compatibility This projector widely accepts various video and comput ...

  • Toshiba TLP X4100 - page 10

    10 PREP ARA TION NAME OF EA CH P AR T OF PR OJECT OR BO TT OM OF CABINET BA CK OF CABINET HOT AIR EXHAUSTED ! Air blown from exhaust vent is hot. When using or installing a projector, following precautions should be taken. ● Do not put a flammable object near this vent. ● Keep rear grills at least 3’(1 m) away from any object, especially heat ...

  • Toshiba TLP X4100 - page 11

    11 PREP ARA TION POSITIONING PR OJECT OR ● This projector is designed to project on a flat projection surface. ● Projector can be focused from 4.6’ (1.4m) ~ 48.3’ (14.7m). ● Refer to figure below to adjust screen size. Screen Size Distance 40” 31” 4.6’ (1.4m) 40” 4.6’(1.4m) 11.8’(3.6m) 24.0’(7.3m) 36.1’(11.0m) Max. Zoom Mi ...

  • Toshiba TLP X4100 - page 12

    12 PREP ARA TION CA UTION IN CARR YING OR TRANSPORTING A PROJECT OR ● Do not drop or bump a projector, otherwise damages or malfunctions may result. ● When carrying a projector, use a suitable carrying case. ● Do not transport a projector by using a courier or transport service in an unsuitable transport case. This may cause damage to a proje ...

  • Toshiba TLP X4100 - page 13

    13 S–VIDEO R–AUDIO–L VIDEO/Y Cb/Pb Cr/Pr VIDEO/Y Cb/Pb Cr/Pr RESET CONTROL PORT USB A UDIO 1 AUDIO 2 ANALOG DIGIT AL(DVI-D) INPUT 1 INPUT 2 INPUT 3 R/C JACK GB R H/V V ( MONO ) CONNECTING PR OJECT OR TERMINALS OF PR OJECT OR When controlling computer with Remote Control Unit of this projector, connect mouse port of your personal computer to t ...

  • Toshiba TLP X4100 - page 14

    14 S–VIDEO R–AUDIO–L VIDEO/Y Cb/Pb Cr/Pr VIDEO/Y Cb/Pb Cr/Pr RESET CONTROL PORT USB AUDIO 1 AUDIO 2 ANALOG DIGIT AL(DVI-D) INPUT 1 INPUT 2 INPUT 3 R/C JACK GB R H/V V ( MONO ) ON 1 DIP ON OFF 2 3 4 5 6 13" MODE (640 x 480) 16" MODE (832 x 624) 19" MODE (1024 x 768) OFF ON ON ON ON ON ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF O ...

  • Toshiba TLP X4100 - page 15

    15 CONNECTING PR OJECT OR CONNECTING T O VIDEO EQUIPMENT S–VIDEO R–AUDIO–L VIDEO/Y Cb/Pb Cr/Pr VIDEO/Y Cb/Pb Cr/Pr RESET CONTROL PORT USB AUDIO 1 AUDIO 2 ANALOG DIGIT AL(DVI-D) INPUT 1 INPUT 2 INPUT 3 R/C JACK GB R H/V V ( MONO ) Video Source (example) Video Cassette Recorder Video Disc Player S-VIDEO Cable ✽ Terminals of a Projector S-VIDE ...

  • Toshiba TLP X4100 - page 16

    16 BEFORE OPERA TION V OLUME ON-OFF FOCUS ZOOM D.ZOOM MENU MUTE LASER KEYST ONE NO SHO W FREEZE AU TO PC ADJ. IMA GE P-TIMER LOCK INPUT LENS SHIFT OPERA TION OF REMO TE CONTR OL ON ALL OFF ALL-OFF SWITCH Left Side When using Remote Control Unit, turn this switch to “ON.” And turn it to “ALL OFF” when it is not used. This Remote Control Unit ...

  • Toshiba TLP X4100 - page 17

    17 BEFORE OPERA TION To insure safe operation, please observe following precautions : ● Use (2) AA, UM3 or R06 type alkaline batteries. ● Replace two batteries at same time. ● Do not use a new battery with an used battery. ● Avoid contact with water or liquid. ● Do not expose Remote Control Unit to moisture, or heat. ● Do not drop Remot ...

  • Toshiba TLP X4100 - page 18

    18 BEFORE OPERA TION T OP CONTR OLS AND INDICA T ORS Used to open or close MENU operation. (P19, 20) MENU BUTTON IMAGE BUTTON READY INDICATOR SELECT BUTTON POWER ON–OFF BUTTON INPUT BUTTON WARNING TEMP. INDICATOR LAMP INDICATOR POINT (VOLUME + / – ) BUTTONS LAMP REPLACE INDICATOR Used to select image level. (P29, 34) Lights green when a project ...

  • Toshiba TLP X4100 - page 19

    19 HO W T O OPERA TE ON-SCREEN MENU FLO W OF ON-SCREEN MENU OPERA TION Display ON-SCREEN MENU Press MENU button to display ON-SCREEN MENU (MENU BAR). A red frame is POINTER. Move POINTER (red frame) to MENU ICON that you want to select by pressing POINT RIGHT / LEFT buttons. Adjust ITEM DATA by pressing POINT RIGHT / LEFT buttons. Refer to followin ...

  • Toshiba TLP X4100 - page 20

    20 BEFORE OPERA TION MENU B AR PC SYSTEM MENU Used to select computer system. (Refer to P24, 25) IMAGE ADJUST MENU Used to adjust computer image. [Contrast / Brightness / White Balance (R/G/B) / Gamma] (Refer to P30) SETTING MENU Used to change settings of projector or reset Lamp Replace Counter. (Refer to P37,-39) SOUND MENU Used to adjust volume ...

  • Toshiba TLP X4100 - page 21

    21 BEFORE OPERA TION TURNING ON PR OJECT OR Connect a projector's AC Power Cord into an AC outlet. LAMP Indicator lights RED, and READY Indicator lights GREEN. Press POWER ON-OFF button on Top Control or on Remote Control Unit to ON. LAMP Indicator dims, and Cooling Fans start to operate. Preparation Display appears on a screen and count-down ...

  • Toshiba TLP X4100 - page 22

    22 B ASIC OPERA TION ADJUSTING SCREEN Message disappears after 4 seconds. Message disappears after 4 seconds. Zoom Focus ZOOM ADJUSTMENT FOCUS ADJUSTMENT 1 Press ZOOM button on Top Control or ZOOM ▲ / ▼ button on Remote Control Unit. Message “Zoom” is displayed. 2 Press ZOOM ▲ button or POINT UP button to make image larger, and press ZOOM ...

  • Toshiba TLP X4100 - page 23

    23 B ASIC OPERA TION Press FREEZE button on Remote Control Unit to freeze picture on-screen. To cancel FREEZE function, press FREEZE button again or press any other button except POINT / SELECT / RIGHT CLICK / LASER button. Press NO SHOW button on Remote Control Unit to black out image. To restore to normal, press NO SHOW button again or press any ...

  • Toshiba TLP X4100 - page 24

    24 COMPUTER INPUT SELECTING INPUT SOURCE DIRECT OPERA TION Choose Computer by pressing INPUT button on Top Control or on Remote Control Unit. If projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below). INPUT button Input 1 Input 2 Input 3 Press MENU button and ON-SCREEN MENU will appear. Press POINT L ...

  • Toshiba TLP X4100 - page 25

    25 COMPUTER INPUT This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA or SXGA (refer to “COMPATIBLE COMPUTER SPECIFICATION” on page 28). When selecting Computer, this projector automatically tunes to incoming signal and projects proper image without any special setting. (Some computers need setting ma ...

  • Toshiba TLP X4100 - page 26

    26 COMPUTER INPUT MANU AL PC ADJUSTMENT This projector can automatically tune to display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from standard ones and may not be tuned by Multi-Scan system of this projector. If this happens, projector cannot reproduce a p ...

  • Toshiba TLP X4100 - page 27

    27 COMPUTER INPUT NOTE : Display area (H/V) and Full screen cannot be adjusted when “1035i (HDTV)” or “1080i (HDTV)” is selected on PC SYSTEM Menu (P25). Selects area displayed with this projector. Select resolution at Display area dialog box. Display area Adjustment of horizontal area displayed with this projector. Press POINT LEFT/RIGHT b ...

  • Toshiba TLP X4100 - page 28

    28 COMPUTER INPUT COMP A TIBLE COMPUTER SPECIFICA TIONS Basically this projector can accept a signal from all computers with V, H-Frequency mentioned below and less than 160 MHz of Dot Clock. NOTE : Specifications are subject to change without notice. ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) VGA 1 640 x 480 31.47 59.88 VGA 2 720 x 40 ...

  • Toshiba TLP X4100 - page 29

    29 COMPUTER INPUT PICTURE IMA GE ADJUSTMENTS IMA GE LEVEL SELECT (MENU) Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to IMAGE SELECT Menu icon. 1 2 Press POINT DOWN button to move a red frame pointer to level that you want to set and then press SELECT button. Move a red frame icon to le ...

  • Toshiba TLP X4100 - page 30

    30 COMPUTER INPUT Press POINT LEFT/RIGHT buttons to adjust value. Reset all adjustment to previous figure. Reset Store Closes IMAGE MENU. Quit Other icons operates as follows. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to IMAGE ADJUST Menu icon. 1 2 Press POINT DOWN button to move a ...

  • Toshiba TLP X4100 - page 31

    31 COMPUTER INPUT PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display desirable image size. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to SCREEN Menu icon. When Digital zoom + is selected, ON-SCREEN MENU disappears and message ...

  • Toshiba TLP X4100 - page 32

    32 VIDEO INPUT When video input signal is connected to Y-Pb/Cb- Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr. Y,Pb/Cb,Pr/Cr SELECTING INPUT SOURCE Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to INPUT Menu icon. 1 Move a pointer to source and press SELECT button. Source Select Menu (VIDEO) Move ...

  • Toshiba TLP X4100 - page 33

    33 VIDEO INPUT AV SYSTEM MENU (VIDEO OR S-VIDEO) AV SYSTEM MENU (COMPONENT VIDEO) SELECTING VIDEO SYSTEM Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to AV SYSTEM Menu icon. Press POINT DOWN button to move a red arrow pointer to system that you want to select and then press SELECT butt ...

  • Toshiba TLP X4100 - page 34

    34 VIDEO INPUT PICTURE IMA GE ADJUSTMENTS IMA GE LEVEL SELECT (MENU) Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to IMAGE SELECT Menu icon. 1 2 Press POINT DOWN button to move a red frame pointer to level that you want to set and then press SELECT button. Move red frame pointer to leve ...

  • Toshiba TLP X4100 - page 35

    35 VIDEO INPUT Press POINT LEFT/RIGHT buttons to adjust value. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to IMAGE ADJUST Menu icon. 1 2 Press POINT DOWN button to move a red frame pointer to item that you want to adjust and then press SELECT button. Level of each item is displayed ...

  • Toshiba TLP X4100 - page 36

    36 VIDEO INPUT PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display desirable image size. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to SCREEN Menu icon. Press POINT DOWN button and move a red frame pointer to function that you ...

  • Toshiba TLP X4100 - page 37

    37 SETTING Ceiling When this function is “On,” picture is top / bottom and left / right reversed. This function is used to project image from a ceiling mounted projector. Rear When this function is “On,” picture is left / right reversed. This function is used to project image to a rear projection screen. Ceiling function Rear function Keyst ...

  • Toshiba TLP X4100 - page 38

    38 SETTING Remote control This projector has two different remote control codes; factory-set normal code (Code 1) and secondary code (Code 2). This switching function prevents remote control operation mixture (jam) when operating several projectors or video equipment together. When operating projector in “Code 2,” both projector and Remote Cont ...

  • Toshiba TLP X4100 - page 39

    39 SETTING/APPENDIX OPERA TING WIRELESS MOUSE INST ALLA TION Wireless Remote Control Unit is not only able to operate this projector but also usable as a wireless mouse for most Personal Computers. POINT buttons and two CLICK buttons are used for wireless mouse operation. This Wireless Mouse function is available only when PC mouse pointer is displ ...

  • Toshiba TLP X4100 - page 40

    40 APPENDIX CLEANING PR OJECTION LENS Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch a surface. When a projector is not in use, replace Lens Cover. 1 3 Lightly wipe a cleaning cloth over Projection Lens. 2 Follow t ...

  • Toshiba TLP X4100 - page 41

    41 APPENDIX LAMP REPLA CEMENT When life of Projection Lamp of this projector draws to an end, LAMP REPLACEMENT indicator lights yellow. When a projected image becomes dark or color of an image becomes unnatural, replacement of Projection Lamp is required. Turn off a projector and disconnect AC plug. Allow a projector to cool for at least 45 minutes ...

  • Toshiba TLP X4100 - page 42

    42 APPENDIX TR OUBLESHOO TING Before calling your dealer or service center for assistance, check matters below once again. 1. Make sure you have connected a projector to your computer or video equipment as described in section "CONNECTING PROJECTOR" on pages 13 ~ 15. 2. Check cable connection. Verify that all computer, video and power cor ...

  • Toshiba TLP X4100 - page 43

    43 APPENDIX Remote Control Unit does not work. ● Check batteries. ● Check ALL-OFF switch on Remote Control Unit is set to “ON”. ● Make sure nothing is between Infrared Remote Receiver and Remote Control Unit. ● Make sure you are not too far from a projector when using Remote Control Unit. Maximum operating range is 16.4’ (5m). ● Che ...

  • Toshiba TLP X4100 - page 44

    APPENDIX 3LCD Data Projector Accessories ● Specifications are subject to change without notice. TECHNICAL SPECIFICA TIONS 1.3" TFT Active Matrix type, 3 panels 18.5 lbs (8.4 kg) 12.6" x 6.6" x 18.5" (319 mm x 168 mm x 470 mm) 1024 x 768 dots 2,359,296 (1024 x 768 x 3 panels) PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N Up and D ...

  • Toshiba TLP X4100 - page 45

    45 APPENDIX CONFIGURA TIONS OF TERMINALS COMPUTER INPUT-1 TERMINAL (ANALOG) Terminal : HDB15-PIN Connect display output terminal of computer to this terminal with VGA Cable (supplied). When connecting Macintosh computer, MAC Adapter (supplied) is required. 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Red Input Ground (Horiz.sync.) Green Input Sense 2 Blue I ...

  • Toshiba TLP X4100 - page 46

    46 ...

  • Toshiba TLP X4100 - page 47

    47 ...

  • Toshiba TLP X4100 - page 48

    Part No. 610 301 2780 (1AA6P1P3523-- MA8SA) Printed in Japan ...

Manufacturer Toshiba Category Projector

Documents that we receive from a manufacturer of a Toshiba TLP X4100 can be divided into several groups. They are, among others:
- Toshiba technical drawings
- TLP X4100 manuals
- Toshiba product data sheets
- information booklets
- or energy labels Toshiba TLP X4100
All of them are important, but the most important information from the point of view of use of the device are in the user manual Toshiba TLP X4100.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Toshiba TLP X4100, service manual, brief instructions and user manuals Toshiba TLP X4100. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Toshiba TLP X4100.

Similar manuals

A complete manual for the device Toshiba TLP X4100, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Toshiba TLP X4100 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Toshiba TLP X4100.

A complete Toshiba manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Toshiba TLP X4100 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Toshiba TLP X4100, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Toshiba TLP X4100, that we can find in the current document
3. Tips how to use the basic functions of the device Toshiba TLP X4100 - which should help us in our first steps of using Toshiba TLP X4100
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Toshiba TLP X4100
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Toshiba TLP X4100 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Toshiba TLP X4100?

Use the form below

If you did not solve your problem by using a manual Toshiba TLP X4100, ask a question using the form below. If a user had a similar problem with Toshiba TLP X4100 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)