English dropdown-ico

Manual Omega HHT=1501

27 pages 1.24 mb
Download

Go to site of 27

Summary
  • Omega HHT=1501 - page 1

    ...

  • Omega HHT=1501 - page 2

    ...

  • Omega HHT=1501 - page 3

    TABLE OF CONTENTS 1. SPECIFICATIONS ...................................................................................... 1 2. PANEL FUNCTIONS ................................................................................... 2 3. OPERATING INSTRUCTION ..................................................................... 4 3.1. Normal Operation . ...

  • Omega HHT=1501 - page 4

    ...

  • Omega HHT=1501 - page 5

    1 1 1. SPECIFICATIONS Speed (Non-contact): Range Resolution Accuracy RPM 10.00 - 99999 0.01/0.1/1 0.04% ±2 dgts rps(Hz) 0.200 - 2000.0 0.001/0.01/0.1 0.04% ±2 dgts Speed (Contact) Range Resolution Accuracy RPM / (/ symoblizes "Contact" 20.00 - 29999 0.01/0.1/1 0.04% ±2 dgts m/min 2.000 - 2999.9 0.001/0.01/0.1 0.04% ±2 dgts ft/min 6.00 ...

  • Omega HHT=1501 - page 6

    2 2 2. PANEL FUNCTIONS ...

  • Omega HHT=1501 - page 7

    3 3 2.1. Reflecting tape Attach a reflecting tape to the surface of the unit to be measured 2.2. Reflecting signal light beam It is recommenced that the reflecting surface is perpendicular to the emitting/receiving unit for best measurement. 2.3. Emitting/Receiving Unit The red light emits from the left side of the tachometer. And a receiving senso ...

  • Omega HHT=1501 - page 8

    4 4 2.10. Start Measurement Symbol 2.11. Hours:Minutes Clock ...

  • Omega HHT=1501 - page 9

    5 5 3. OPERATING INSTRUCTION ...

  • Omega HHT=1501 - page 10

    6 6 3.1. Normal Operation a. Install four 1.5V AA size batteries. b. Cut off a piece of reflective tape of size 1.0 cm x 1.4 cm (optimal size) c. Wipe off oil or stains from the surface where reflective tape will be adhered. d. Stick the self-adhesive re flective tape on the object whose rotational speed is to be measured. The reflective tape shoul ...

  • Omega HHT=1501 - page 11

    7 7 3.2. Using the Mechanical Adaptor (Option RM1502) a. Select proper rubber head. b. Attach the mechanical adaptor to the unit. and fasten the screw. c. Press the unit button (left button) to select RPM / ( instead of RPM only). The auxiliary LED will be turned on while the main LED will be turned off. d. Press against the shaft of the object to ...

  • Omega HHT=1501 - page 12

    8 8 3.3. Measurement of Surface Speed(m/min, ft/min, or yd/min) a. Attach the mechanical adaptor (option RM-1502) to the unit. b. Press the unit button to select desired unit. The auxiliary LED will be turned on while the main LED will be turned off. c. Slightly touch against the surface to be measured. ...

  • Omega HHT=1501 - page 13

    9 9 3.4. Use as an Event Counter with Ext ernal Light Source a. Press the unit button several times to select the unit of "No. O" (counts). The "O" symbol is used to instruct users that external light source is required. b. Wh en the symbol "No. O" appears, the tachometer reset the upper clock to 00:00 and start counti ...

  • Omega HHT=1501 - page 14

    10 10 3.6. External Signal(TTL) Input (RM1501) Instead of receiving signal from light source, users can input external TTL signal (High: > 4.5V, Low: 0V) through pin 8 of RS232C connector with pin 5 as signal ground. NOTE: It is strongly recommended that the emiting/receiving unit be covered to avoid undesired light signal coming in. 3.7. Digita ...

  • Omega HHT=1501 - page 15

    11 11 3.8. Measuring Slow Rotating Objects If the rotati ng speed of the object which you are measuring is very slow, it is recommended that you use a tripod to hold the tachometer in place and use multiple pieces of tape for more accurate result. If multiple pieces of tape are used, each piece of tape should be located at a equal distance to each ...

  • Omega HHT=1501 - page 16

    12 12 seconds, and the max/min/ave symbols will disappear in LCD. 3.10. Turning On/Off Tachometer Press any button will turn on the power of tachometer. To turn off the power of tachometer, press and hold the START button until word "OFF" is displayed in LCD. Then release the START button. 3.11. Disable Auto-Power-Off Function If tachomet ...

  • Omega HHT=1501 - page 17

    13 13 3.12. REPLACING THE BATTERIES a. When the symbol (low battery) appears in the LCD, it is time to replace the batteries. b. Remove the screw of the battery cover and remove the battery cover. c Replace the old batteries with 4 new batteries. Do not mix different type of batteries together. d. Replace the battery cover and fasten the screw. ...

  • Omega HHT=1501 - page 18

    14 14 4. Protocol of RS-232C Serial Interface (RM-1501) Ten bytes are sent out through RS-232C connector to PC. The definitions of each byte are as followings: Byte 1: Leading byte 0x0D Byte 2: Decimal point of LCD display bit0: dp1 (0000.0), if 1 bit1: dp2 (000.00), if 1 bit2: dp3 (00.000), if 1 Byte 3: Flags for current status bit0: low battery, ...

  • Omega HHT=1501 - page 19

    15 15 5. Installation of Window TM Application Software (RM-1501) 5.1. For Windows 3.1 A. Start Microsoft TM Windows TM B. Insert disk in drive A (or B) C. From Program Manager , select File menu and choose Run D. Type a:setup (or b:setup) and press Enter key 5.2. For Windows 95 A. Start Windows TM 95 B. Insert disk in drive A (or B) C. Press STA ...

  • Omega HHT=1501 - page 20

    16 16 6. Description of Windows TM Application Program (RM-1501) Main Window : When the program is executed, the program automatically search for connected tachometer or available serial port. If no serial port is available, then a message of "No communication port" will be displayed, and the program exits . Once communication port is set ...

  • Omega HHT=1501 - page 21

    17 17 VIEW FILE : If the View option under FILE in the Main Window is selected, a view window will be shown as above, and the users can review your ASCII data file. If a printer is connected to the PC, users can print out content selectively. File: Open users data file by selecting this menu. Users will be asked to enter file name. After the name b ...

  • Omega HHT=1501 - page 22

    18 18 Selected: Indicate the current record number being selected. DISPLAY : DISPLAY menu has four options: DIGITAL, ANALOG, LIST, and GRAPHIC. DIGITAL: If this option is selected or CTRL+D is pressed, a window, which emulates multimeter's LCD display, shall appears on the screen. ANALOG: ...

  • Omega HHT=1501 - page 23

    19 19 If this option is selected or CTRL+A is pressed, a window, which emulates an analog meter, shall appear on the screen. LIST: If this option is selected or CTRL+L is pressed, a window, which lists the date, function, range, and value every sampling, shall appear on the screen. GRAPHIC: If this option is selected or CTRL+G is pressed, a window, ...

  • Omega HHT=1501 - page 24

    20 20 the minimum and maximum value for the Y (vertical) axis. Option : If you select Option, a pull down menu will show three options: Sample Rate, Baud Rate. Upper Limit: Enter upper limit. If upper limit is exceeded, a OVER message will be displayed in screen. Lower Limit: Enter lower limit. If displayed value is less than lower limit, a UNDER m ...

  • Omega HHT=1501 - page 25

    21 21 ...

  • Omega HHT=1501 - page 26

    22 22 ...

  • Omega HHT=1501 - page 27

    23 23 ...

Manufacturer Omega Category Automobile Parts

Documents that we receive from a manufacturer of a Omega HHT=1501 can be divided into several groups. They are, among others:
- Omega technical drawings
- HHT=1501 manuals
- Omega product data sheets
- information booklets
- or energy labels Omega HHT=1501
All of them are important, but the most important information from the point of view of use of the device are in the user manual Omega HHT=1501.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Omega HHT=1501, service manual, brief instructions and user manuals Omega HHT=1501. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Omega HHT=1501.

Similar manuals

A complete manual for the device Omega HHT=1501, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Omega HHT=1501 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Omega HHT=1501.

A complete Omega manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Omega HHT=1501 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Omega HHT=1501, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Omega HHT=1501, that we can find in the current document
3. Tips how to use the basic functions of the device Omega HHT=1501 - which should help us in our first steps of using Omega HHT=1501
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Omega HHT=1501
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Omega HHT=1501 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Omega HHT=1501?

Use the form below

If you did not solve your problem by using a manual Omega HHT=1501, ask a question using the form below. If a user had a similar problem with Omega HHT=1501 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)