-
Humminbird 383c - page 1
383c GP S Char tplotter Oper ations Manual 383c GP S Char tplotter Oper ations Manual 531450-1_B ...
-
Humminbird 383c - page 2
Thank Y ou! Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has built its reputation by designing and manufacturing top- quality , thoroughly reliable marine equipment. Y our Humminbird® is designed for trouble-free use in even the harshest marine environmen t. In the unlikely event that your Humminbird® d ...
-
Humminbird 383c - page 3
ii How Sonar W orks 1 DualBeam PLUS™ Sonar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 How GPS and Car tograph y Work 3 What’ s On the Display 5 Views 7 Sonar View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
-
Humminbird 383c - page 4
MENU Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 4-W A Y Cursor Control K ey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 MARK Key . . . . . . . . . . . . . . ...
-
Humminbird 383c - page 5
iv Remove Grid (only if Grid is Active) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Sonar Window (Combo view only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 W aypoint [Name] (Most recently- created waypoint) . . . ...
-
Humminbird 383c - page 6
v Chart Menu T ab 66 Chart Detail Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Map Borders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Lat/Lon Gr ...
-
Humminbird 383c - page 7
vi Time Format (Advanced, International only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Date Format (Advanced, International only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 NMEA Output (Advanced) . . . . . . . . . . . . . . . . . . . . . . . ...
-
Humminbird 383c - page 8
1 How Sonar W orks Sonar technology is based on sound waves. The 300 Series™ Fishing Syst em uses sonar to locate and define structure, bot tom c ontour and composition, as well as depth directly below the transducer . Y our 300 Series™ Fishing System sends a sound wave signal and determines distance by measuring the time between the transmissi ...
-
Humminbird 383c - page 9
2 The sound pulses are transmit ted at various frequencies depending on the application. V ery high frequencies (455 kHz) are used for great est definition but the operating depth is limited. High frequencies (200 kHz) are commonly used on c onsumer sonar and provide a good balance between depth performance and resolution. Low frequencies (83 kHz) ...
-
Humminbird 383c - page 10
3 DualBeam PLUS™ Sonar Y our 300 Series™ Fishing System uses a 200/83 kHz DualBeam PLUS™ sonar system with a wide (60 °) area of coverage. DualBeam PLUS™ sonar has a narr owly focused 20 ° center beam, surrounded by a second beam of 60 °, expanding your coverage to an area equal t o your depth. In 20 feet of water , the wider beam covers ...
-
Humminbird 383c - page 11
GPS uses a constellation of 24 sat ellites that continually send radio signals to the earth. Y our present position is determined by receiving signals from up t o 16 satellites and measuring the distance from the satellites. All satellites broadcast a uniquely c oded signal once per second at exactly the same time. The GPS receiver on your boat rec ...
-
Humminbird 383c - page 12
What’ s On the Display The 300 Series™ Fishing System can display a variety of useful inf ormation about the area Depth - water depth; can be set to alarm when the water becomes too shallow . T emperature - water surface temperature. Timer - Elapsed time with T emp/Speed Accessory or GPS Receiver . Distance - Distance traveled with T emp/Speed ...
-
Humminbird 383c - page 13
under and adjacent to your boat, including the following it ems: RTS® (Real Time Sonar) Window Structure - where fish may be hiding. Thermoclines - layers of water with diff erent temperatures that appear at diff erent depths and differ ent times of the year . A thermocline typically appears as a continuous band of many colors moving across the di ...
-
Humminbird 383c - page 14
7 Views The views available on your 300 Series™ Fishing Syst em are: Sonar views: Navig a tion views: • Sonar View • Bird’ s Eye View • Zoom View • Chart View • 200/83 kHz Split Sonar View • Combo View . • Big Digits View • Circular Flasher View . NOTE: When you change any menu set tings that affect the sonar , the view will upd ...
-
Humminbird 383c - page 15
8 Sonar View Sonar View presents a historical log of sonar r eturns. Depth is always displayed. Readouts for temperature and speed ar e automatically displayed if the appropriate accessory is connected. The most recent sonar returns are c harted on the right side of the window; as new information is received, the older information is mo ved across ...
-
Humminbird 383c - page 16
9 Understanding Sonar History It is important to understand the significance of the 300 Series™ Fishing System display . The display does NO T show a literal 3- dimensional representation of what is under the water . Each vertical band of data received by the contr ol head and plott ed on the display represents something that was detected by a so ...
-
Humminbird 383c - page 17
10 Freeze Fr ame Freeze Frame - Pressing any arr ow on the 4-W A Y Cursor Control k ey will freeze the screen and a cursor will be displayed on the screen. The cursor can be positioned on the display using the 4-W A Y Cursor Contr ol key to det ermine the depth of any sonar return. The RTS® Window c ontinues to update in Freeze Frame. In addition, ...
-
Humminbird 383c - page 18
11 Structure ID® represents weak returns in blue and strong returns in red. WhiteLine® highlights the strongest sonar r eturns in white, resulting in a distinctive outline. This has the benefit of clearly defining the bot tom on the display . ...
-
Humminbird 383c - page 19
12 Sonar Zoom View Sonar Zoom View increases the displayed r esolution to separate sonar returns that are very close together , such as those caused by fish suspended close t o the bott om or within structure. In Zoom View , the display is split to show a narrow slice of the full range view on the right and the zoomed view on the lef t. The full ra ...
-
Humminbird 383c - page 20
13 200/83 kHz Split Sonar View Split Sonar View displays sonar returns from the 83 kHz wide beam on the left side of the screen and displays sonar returns from the 200 kHz narr ow beam on the right side of the screen. Depth is always displayed in the upper left hand corner . Y ou can use the Split Sonar View to make side by side c omparisons betwee ...
-
Humminbird 383c - page 21
14 Big Digits View Big Digits View provides digital data in a lar ge, easy-to-see format. Depth is always displayed. Readouts for temperature, speed and T riplog information are displayed automatically if the appropriat e accessory is connected to the 300 Series™ Fishing System. The T riplog shows distance traveled, average speed, and time elapse ...
-
Humminbird 383c - page 22
15 Bird’ s Eye View Bird's Eye View - This view shows a 3-D , perspective view of the track and the chart’ s land cont our from a point above and behind the boat (the eye point). As the boat turns , the eye point moves to f ollow the boat. When you press the 4 -W A Y Cursor key in the Bird’ s Eye View , the position of the eye point will ...
-
Humminbird 383c - page 23
16 Chart View Chart View - This view shows car tography from the built -in UniMap™ for the area surrounding your current position. The curr ent track (also known as the position hist ory or breadcrumb trail) showing where the boat has been, along with saved trac ks, waypoints, and the curr ent route (when navigating), are ov erlaid on the chart. ...
-
Humminbird 383c - page 24
17 Combo View Combo View - This view is displayed as a split screen, with Chart View on the left and Sonar View on the right side of the screen. The width of the sonar window can be changed. View Orientation Both Chart and Combo views allow you t o choose the orientation of the view . When North-Up orientation is selected, T rue North is shown at t ...
-
Humminbird 383c - page 25
18 Viewing Cartography In the Chart or Combo Views there are several cartography-related functions that you can access using various keys. Panning: Use the 4-W A Y Cursor keys to move the chart around on the display in the direction of the key being pressed. When you do this, a bull's eye cursor is drawn at the center of the screen and is link ...
-
Humminbird 383c - page 26
19 W aypoints, R outes and Tr acks W aypoints are stored positions that allow you t o mark areas of interest or navigation points. Y our 300 Series™ Fishing System can st ore up to 2000 waypoints. Routes link two or more waypoin ts together to create a path f or navigation, and are used in trip planning. Y ou can link individual waypoints togethe ...
-
Humminbird 383c - page 27
20 Sav e, Edit, or Delete a W aypoint Save your current position as a w aypoint: On any view , press the MARK key to save the current position of the boat as a waypoint. Save the cursor position as a wa ypoint: On the Chart or Combo view , use the Cursor key to designate the position you want t o save as a waypoint. Then press the MARK key t o save ...
-
Humminbird 383c - page 28
21 T o make it easier to select a waypoint, select Sort By and press the RIGHT or LEFT Cursor keys t o select a sor t order: • Name shows the waypoints alphabetically • Time shows the most recently- created waypoint first • Distance shows the closest waypoint first. Delete a waypoint: Fr om the Waypoin ts submenu, select Delete and press the ...
-
Humminbird 383c - page 29
22 Add a W aypoint T arget or Tr olling Grid Add or Remov e a Waypoint T arget: From the W aypoints submenu, select T arget and press the RIGHT Cursor key t o display a list of waypoints. Select the waypoint you want to tar get. A target consisting of concentric circles cent ered on the selected waypoint will appear on all of the navigation views; ...
-
Humminbird 383c - page 30
Sav e, Edit or Delete a Route Save the current rout e: While you are navigating , the current route can be saved. Fr om the Navigation X -Press TM menu, select Save Current Route and press the RIGHT Cursor key . Navigation will continue. Display the Routes submenu: Fr om any view , press the MENU key twice t o display the Main Menu System, then use ...
-
Humminbird 383c - page 31
24 Sav e or Clear a Current T rack Save the current trac k: From the Navigation X -Press TM menu, select Save Current T rack and press the RIGHT Cursor key . The track will remain on the display , but will change from black t o gray . T o remove the trac k completely from the display , see Edit, Delete or Hide Saved T racks. NOTE: When you save a t ...
-
Humminbird 383c - page 32
25 K ey Functions Y our 300 Series™ Fishing System user int er face consists of a set of easy-t o-use keys that work with various on-screen views and menus to give you flexibility and con trol over your fishing experience. POWER/LIGHT K ey The POWER/LIGHT k ey is used to turn the 300 Series™ Fishing System on and off , and also to adjust the ba ...
-
Humminbird 383c - page 33
26 MENU K ey The MENU key is used to access the menu s ystem. Start-Up Options Menu - Press the MENU key during the power up sequence t o view the Start -Up Options menu. X -Press TM Menu - Press the MENU key once for the X -Press TM Menu. The X -Press TM menu allows you to access frequently-used set tings without having to navigate through the who ...
-
Humminbird 383c - page 34
27 MARK K ey Press the MARK key while in any view t o mark the position of a waypoint, either at the current boat location, or , if the Cursor is active, at the current Cursor location. GOT O K ey If the Cursor is active, pressing the GO TO k ey while in any view creates a waypoint and starts navigation towards that waypoint. If the Cursor is not a ...
-
Humminbird 383c - page 35
28 Powering Up the Unit T urn on your 300 Series™ Fishing System by pressing the POWER/LIGHT k ey . The Title screen is displayed until the 300 Series™ Fishing Syst em begins operation. Y our 300 Series™ Fishing System will begin Normal or Simulator operation, depending on the presence or absence of a transducer . The Menu System The menu sys ...
-
Humminbird 383c - page 36
Press the MENU key twice for the Main Menu, then use the 4 - W A Y Cursor LEFT or RIGHT key to select a tab, and use the DOWN or UP key to select a specific menu item under that tab , then use the LEFT or RIGHT keys again t o change a menu set ting. Press the EXIT key t o move quickly to the t op of the tab. A down arr ow at the bot tom of a menu m ...
-
Humminbird 383c - page 37
30 T otal Screen Update - when you change any menu set tings that affect the Sonar View , the view will update immediately (i.e. you don ’t have to exit the menu t o apply the change to the scr een). Sonar T ab, Normal Mode Sonar T ab, Advanced Mode ...
-
Humminbird 383c - page 38
Start-Up Options Menu Press the MENU key when the Title screen is displayed to access the Start-Up Options menu. Use the UP or DOWN 4-W A Y Cursor keys t o position the cursor , then the RIGHT Cursor key t o select one of the following choices. If you wait t oo long , the system will default to whichever menu mode happens t o be highlighted: • No ...
-
Humminbird 383c - page 39
32 Simulator Use the Simulator to learn how t o use your 300 Series™ Fishing System bef ore taking your boat on the water . The Simulator is a very power ful tool that simulates on the water operation, pro viding a randomly-updated display . W e recommend going through this manual while using the Simulator , since all of the menus function and af ...
-
Humminbird 383c - page 40
Self T est Self T est displays results from the in ternal diagnostic self test, including unit serial number , Printed Circuit Board (PCB) serial number , software r evision, total hours of operation and the input voltage. Accessory T est Accessory T est lists the accessories connected to the system. NOTE: The speed accessory will be detected only ...
-
Humminbird 383c - page 41
34 GPS Diagnostic View GPS Diagnostic View shows a sky chart and numerical data from the GPS receiver . The sky chart shows the location of each visible GPS satellite with its sat ellite number and a signal strength bar . A dark grey bar indicates that the satellite is being used t o determine your current position. A light orange bar indicat es th ...
-
Humminbird 383c - page 42
35 Sonar X -Press TM Menu (Sonar views only) The Sonar X-Press TM menu provides access to the set tings most frequently-used. Press the MENU ke y once while in any of the Sonar Views to access the Sonar X -Press TM menu. NOTE: Menu c hoices will vary depending on system set tings such as whether the unit is set for Advanced User mode or what transd ...
-
Humminbird 383c - page 43
36 Sensitivity Sensitivity contr ols how much detail is shown on the display and will adjust the sensitivity of all sonar frequencies. Increasing the sensitivity shows more sonar returns from small baitfish and suspended debris in the wat er; however , the display may become t oo clutter ed. When operating in very clear water or greater depths , in ...
-
Humminbird 383c - page 44
37 Upper Range (Advanced: Sonar , Split Sonar, Big Digits and Circular Flasher views only) Upper Range sets the shallowest depth range that will be displayed on the Sonar , Split Sonar , Big Digits and Circular Flasher Views. The Upper Range menu choice is available when User Mode is set to Advanced (see Setup Menu T ab: User Mode ) and can only be ...
-
Humminbird 383c - page 45
38 Lower Range Lower Range sets the deepest depth range that will be displayed. Automatic is the default set ting. When in automatic mode, the lower range will be adjusted by the unit to follow the bot tom. Selecting a specific setting locks the depth range into Manual mode. Use both Upper and L ower Range together to view a specific depth range ma ...
-
Humminbird 383c - page 46
Chart Speed Chart Speed determines the speed at which the sonar information moves across the display , and consequently the amoun t of detail shown. A faster speed shows more information in the Sonar Views and is pr eferred by most anglers; however , the sonar information moves acr oss the display quickly . A slower speed keeps the information on t ...
-
Humminbird 383c - page 47
40 Bott om Lock (Sonar Zoom view only) Bott om Lock changes the mode of the Z oomed view in the Sonar Zoom View . Bott om Loc k continuously graphs the bot tom at a constant poin t on the display regardless of changes in depth. This "flat tens" out the bot tom cont our , but is eff ective at showing fish on or near the bot tom. T o turn o ...
-
Humminbird 383c - page 48
41 Navig ation X-Pres s TM Menu (Navigation views only) The Navigation X -Press TM menu provides access t o the set tings most frequently used. Press the MENU key once while in the Bird's Eye View , the Char t or the Combo View to access the Navigation X -Press TM menu. NOTE: Menu c hoices will vary depending on system set tings, such as wheth ...
-
Humminbird 383c - page 49
42 W aypoint [Name] (Only with an active cursor on a waypoint) W aypoint [Name] allows you to view the W aypoints submenu for the waypoint under your cursor . T o view the W a ypoin t [Name] Submenu: 1. Move the cursor onto an existing waypoin t and press the MENU key once, or use Cursor to W aypoint to select a waypoint from a list of saved waypoi ...
-
Humminbird 383c - page 50
43 Cursor to W aypoint (Chart or Combo view only) Cursor to W aypoint allows you to quic kly move the cursor to any saved waypoint, so that you can locate it or edit it. NOTE: This X-Press TM menu it em appears only if you have saved waypoints. T o mo v e cursor t o a sa v ed w a ypoint: 1. Highlight Cursor to W aypoint on the Navigation X -Press T ...
-
Humminbird 383c - page 51
44 Sav e Current Route (only when Navigating) Save Current Rout e allows you to save the current rout e being displayed. This menu choice will only appear when you are curren tly navigating a route. T o Sa v e C urr en t R oute: 1. Highlight Save Curr ent Route on the Navigation X -Press TM menu. 2. Use the RIGHT 4-W A Y Cursor Control k ey to init ...
-
Humminbird 383c - page 52
45 Cancel Navig ation (only when Navigating) Cancel Navigation discards the curren t route and exits Navigation Mode. This menu c hoice will only appear when you are currently navigating a r oute. This will not delete a previously-saved route. T o C anc el Na vig a tion: 1. Highlight Cancel Navigation on the Navigation X -Press TM menu. 2. Use the ...
-
Humminbird 383c - page 53
46 Remo ve Grid (only if a Grid is Active) Remov e Grid removes the waypoint grid from the display . This menu choice will only appear when a grid has already been applied to a waypoint. NOTE : See Add a W aypoint T arget or T rolling Grid for more information. T o R emo v e a Grid: 1. Highlight Remove Grid on the Navigation X -Press TM menu. 2. Us ...
-
Humminbird 383c - page 54
47 W aypoint [Name] (Most recently- created waypoint) W aypoint [Name] allows you to view the waypoints submenu for the most r ecently created waypoint. NOTE : Y ou must have pressed the MARK key at least once since you last powered up the fishfinder for this menu choice t o appear . T o view the W a ypoin t [Name] Submenu: 1. Move the cursor to th ...
-
Humminbird 383c - page 55
48 Sonar Menu T ab Press the MENU key twice to access the Main Menu System and then pr ess the RIGHT Cursor key to select the Sonar tab. NOTE: Menu c hoices will vary depending on system set tings such as whether the unit is set for Advanced User mode or what transducer is currently selected. Sonar Menu ...
-
Humminbird 383c - page 56
49 Beam Select Beam Select sets which sonar returns from the transducer will be displayed on the screen. When set to 200/83 kHz , the returns fr om both beams are blended by starting with the 83 kHz wide beam return, dimming it, and then overlaying it with the 200 kHz narr ow beam return. The darker 200 kHz narr ow beam sonar returns will stand out ...
-
Humminbird 383c - page 57
50 Fish ID+ TM Fish ID+ TM uses advanced signal processing to int erpret sonar returns, and will display a Fish S ymbol when very selec tive requirements are met. When a fish is detected, a fish icon and its depth are displayed abo ve the return that has been classified as being a fish. Three diff erent fish size icons represen t the intensity of t ...
-
Humminbird 383c - page 58
51 Fish ID Sensitivity Fish ID Sensitivity adjusts the threshold of the Fish ID+ TM detection algorithms. Selecting a higher setting allows weaker r eturns to be displayed as fish. This is useful for identifying smaller fish species or baitfish. Selecting a lower setting displays f ewer fish from weak sonar returns. This is helpful when seeking lar ...
-
Humminbird 383c - page 59
52 Bott om View Bott om View selects the method used to represent bot tom and structure on the display . Structure ID® represents weak returns in blue and strong returns in red. WhiteLine® highlights the strongest sonar r eturns in white resulting in a distinctive outline. This has the benefit of clearly defining the bot tom on the display . See ...
-
Humminbird 383c - page 60
53 83 kHz Sensitivity (Advanced) 83 kHz Sensitivity changes the sensitivity of the 83 kHz beam. Increasing the 83 kHz Sensitivity will display additional weak returns and decreasing the 83 kHz Sensitivity will display fewer weak returns. The 83 kHz Sensitivity menu c hoice is only available when User Mode is set to Advanced (see Setup Menu T ab: Us ...
-
Humminbird 383c - page 61
54 Depth Lines (Advanced) Depth Lines divide the display into four equal sections that are separat ed by three horizontal depth lines. The depth of eac h line is displayed along the depth scale. Y ou can either turn Depth Lines On or Off . The Depth Lines menu choice is available when User Mode is set to Advanced (see Setup Menu T ab: User Mode ). ...
-
Humminbird 383c - page 62
55 Surface Clutter (Advanced) Surface Clutter adjusts the filter that r emoves surface clutter noise caused by algae and aeration. The lower the set ting , the less surface clutter will be displayed. The Surface Clut ter menu choice is available when User Mode is set to Adv anced (see Setup Menu T ab: User Mode ). T o c hang e the Sur f ac e Clut t ...
-
Humminbird 383c - page 63
56 Noise Filter (Advanced) Noise Filter adjusts the sonar Noise Filter to limit in terference on the display from sources such as your boat engine, turbulence, or other sonar devices. The Noise Filter menu choice is available when User Mode is set t o Advanced (see Setup Menu T ab: User Mode ). NOTE: The O ff set ting removes all filtering; L ow , ...
-
Humminbird 383c - page 64
57 W ater T ype (Advanced) W ater T ype configures your unit for operation in fresh or salt water . The W ater T ype menu choice is available when User Mode is set t o Advanced (see Setup Menu T ab: User Mode ). NOTE: In salt water , what would be considered a large fish might be 2 to 10 times bigger than a large fish in fresh water (depending on t ...
-
Humminbird 383c - page 65
58 Navig ation Menu T ab Press the MENU key twice to access the Main Menu System, then pr ess the RIGHT cursor key to select the Navigation tab. NOTE: Menu c hoices will vary depending on system set tings. Navigation Menu T ab ...
-
Humminbird 383c - page 66
59 Current T r ack Current T rack allows you t o view the Current T rack submenu. T o view the C urren t T r ac k Submenu: 1. Highlight Current T rack on the Navigation main menu. 2. Use the RIGHT 4-W A Y Cursor Contr ol keys to view the Curr ent T rack submenu. The C urren t T r ac k Submenu c on tains the following menu c hoices: Save Current T r ...
-
Humminbird 383c - page 67
60 Sav ed T racks Saved T racks allows you to view the Saved T racks submenu. T o view the Sa v ed T r ac k s Submenu: 1. Highlight Saved T racks on the Navigation main menu. 2. Use the RIGHT 4-W A Y Cursor Contr ol keys to view the Saved T racks submenu. The Sa v ed T r ac k s Submenu c on tains the f ollowing menu c hoices: Edit allows you to sel ...
-
Humminbird 383c - page 68
61 W aypoints W aypoints allows you to view the W aypoints submenu. T o view the W a ypoin ts Submenu: 1. Highlight Waypoin ts on the Navigation main menu. 2. Use the RIGHT 4-W A Y Cursor Contr ol keys to view the W aypoints submenu. The W a ypoin ts Submenu c on tains the following menu c hoices: Create allows you to create a new waypoint and edit ...
-
Humminbird 383c - page 69
62 Routes Routes allows you to view the Rout es submenu. T o view the R out es Submenu: 1. Highlight Routes on the Navigation main menu. 2. Use the RIGHT 4-W A Y Cursor Contr ol keys to view the Rout es submenu. The R out es Submenu c on tains the following menu c hoices: Create allows you to creat e a new , empty route and add waypoin ts to it imm ...
-
Humminbird 383c - page 70
63 Chart Orientation Chart Orientation allows you to select whether the Chart and Combo Views should be drawn North-Up or Course-Up. T o c hang e the Char t Orien ta tion setting: 1. Highlight Char t Orientation on the Navigation main menu. 2. Use the LEFT or RIGHT 4 -W A Y Cursor Con trol keys t o change the Chart Orientation set ting. (Nor th-Up, ...
-
Humminbird 383c - page 71
64 T rackpoint Interval T rackpoint Interval allows you to select the time period between trackpoints. The curr ent track can only con tain up to 20 ,000 trac kpoints, so longer time periods cause the track t o extend back further in time, but will be less detailed. NOTE: T rackpoint In terval works in conjunction with T rack Min Distance. Both c o ...
-
Humminbird 383c - page 72
65 Map Datum (Advanced) Map Datum allows you to change the map c oordinate system used by the 300 Series™ Fishing System t o match those of a paper map. The Map Datum menu choice is only available when User Mode is set to Advanced (see Setup Menu T ab: User Mode ). T o c hang e the Map Da tum setting: 1. Make sure you are in Advanced User Mode, t ...
-
Humminbird 383c - page 73
66 Chart Menu T ab Press the MENU key twice to access the Main Menu System and then pr ess the RIGHT Cursor key to select the Chart tab. NOTE: Menu choices will vary depending on system set tings such as whether the unit is set for Advanced User mode. Chart Menu ...
-
Humminbird 383c - page 74
67 Chart Detail Level Chart Detail Level allows you to select how much chart detail you want displayed on the Navigation Views. Basic shows land areas , ports, obstructions and restricted areas. Navigation shows navaids , landmarks, ferryways and navigation routes in addition t o the Basic information. Underwater shows depth cont ours, fishing area ...
-
Humminbird 383c - page 75
68 Lat/Lon Grid Lat/Lon Grid allows you to display or hide a grid showing latitude and longitude lines. T o c hang e the La t/L on Grid set ting: 1. Highlight Lat/Lon Grid on the Chart main menu. 2. Use the LEFT or RIGHT 4-W A Y Cursor Contr ol keys to c hange the Lat/Lon Grid set ting. (Hidden, Visible, Default = Hidden) Set Simulation Position (A ...
-
Humminbird 383c - page 76
69 Set Map Offset (Advanced) Set Map Offset allows you to change the map of fset used by the 300 Series™. The Set Map Offset menu choice is only available when User Mode is set t o Advanced (see Setup Menu T ab: User Mode ). NOTE: The Map Offset will be applied t o all maps and not just the map that requires the correction. The Map Offset should ...
-
Humminbird 383c - page 77
70 Alarms Menu T ab From any view , press the MENU key twice to access the Main Menu System. The Alarms tab will be the default selection. NOTE: When an alarm is triggered, you can silence it by pressing any key . The alarm will be silenced, and will not be triggered again until a new instance of the alarm condition is detected. Alarms Menu ...
-
Humminbird 383c - page 78
71 Depth Alarm Depth Alarm sounds when the depth becomes equal to or less than the menu set ting. T o c hang e the Depth Alarm setting: 1. Highlight Depth Alarm on the Alarms main menu. 2. Use the LEFT or RIGHT 4-W A Y Cursor Contr ol keys to c hange the Depth Alarm set ting. (OFF , 1 to 100 feet, or 0 .5 to 30 meters [International Models Only] , ...
-
Humminbird 383c - page 79
72 Low Battery Alarm Low Bat tery Alarm sounds when the input battery voltage is equal to or less than the menu set ting. The batt ery alarm will only sound for the bat tery that is connected to the 300 Series™ Fishing System. The L ow Batt ery Alarm should be set to warn you when the bat tery voltage drops below the safety mar gin that you have ...
-
Humminbird 383c - page 80
73 Off Course Alarm Off Course Alarm sounds when the boat has moved too far of f course based on the menu setting when navigating. Off C ourse Alarm allows you to set how far the boat is allowed to mo ve off course befor e the O ff C ourse Alarm will sound. T o c hang e the O f f Course Alarm set ting: 1. Highlight Off Course Alarm on the Alarms ma ...
-
Humminbird 383c - page 81
74 Drift Alarm Drift Alarm sounds when the boat has ex ceeded the distance from the boat’ s anchored position, based on the menu set ting. Drift Alarm allows you to set the size of a perimeter ar ound the boat’ s anchored position; if the anchored boat drif ts outside of that perimeter , the Drift Alarm will sound. T o c hang e the Drif t Alarm ...
-
Humminbird 383c - page 82
75 Setup Menu T ab From any view , press the MENU key twice to access the tabbed Main Menu System, then press the RIGHT cursor key until the Setup tab is selected. NOTE: Menu choices will vary depending on system set tings such as whether the unit is set for Advanced User mode and what accessories are at tached to the unit. Setup Menu T ab ...
-
Humminbird 383c - page 83
76 Units - Depth Units - Depth selects the units of measure for all depth- related readouts. T o c hang e the Units - Depth setting: 1. Highlight Units - Depth on the Setup menu. 2. Use the LEFT or RIGHT 4-W A Y Cursor Contr ol keys to c hange the Units - Depth set ting. (Meters [International Models only] , Feet, F athoms; Default is Meters for In ...
-
Humminbird 383c - page 84
77 Units - Speed Units - Speed selects the units of measure for speed-relat ed readouts, and will appear in the menu if a T emp/Speed Accessory is connected and the paddlewheel has moved at least once, or if the GPS Receiver is connected. T o c hang e the Units - Speed setting: 1. Highlight Units - Speed on the Setup menu. 2. Use the LEFT or RIGHT ...
-
Humminbird 383c - page 85
78 T riplog Reset T riplog Reset resets the T riplog to zero , and will appear in the menu if a T emp/Speed Accessory is connected and the paddlewheel has moved at least once, or if the GPS Receiver is connected. The T riplog provides the following inf ormation: timer for elapsed time, distance traveled since last reset, and average speed. NOTE: Se ...
-
Humminbird 383c - page 86
79 Select Readouts (Advanced, Sonar view only) Select Readouts sets individual digital readouts on the Sonar View . This Advanced featur e allows you to select what data will be displayed in each of 5 fixed -position data windows arranged around the left and bot tom edges of the Sonar View screen, or whether a particular window will be turned off , ...
-
Humminbird 383c - page 87
80 T o Select Readouts: 1. Make sure you are in Advanced User Mode, then highlight Select Readouts on the Setup main menu. 2. Use the RIGHT 4-W A Y Cursor Control k ey to initiate this procedure. 3. The Selec t Readouts submenu will appear , showing a list of all Readouts. Use the UP or DOWN Cursor keys t o select a par ticular Readout position, th ...
-
Humminbird 383c - page 88
81 T emp O ffset (Advanced) T emp Offset will adjust the temperature readout by the amoun t entered. This menu choice is available only when in Advanced User Mode (see Setup Menu T ab: User Mode .) T o c hang e the T emp O f fset set ting: 1. Make sure you are in Advanced User Mode, then highlight T emp O ffset on the Setup menu. 2. Use the LEFT or ...
-
Humminbird 383c - page 89
82 Local Time Zone (Advanced) Local Time Zone selects your time zone in r eference to the time reported by the GPS receiver when Time+Date is selected as a Digital Readout on the Sonar View (see Select Readouts ). This menu choice is av ailable only when in Advanced User Mode (see Setup Menu T ab: User Mode ). T o c hang e the L ocal Time Zone: 1. ...
-
Humminbird 383c - page 90
83 Position Format (Advanced) Position Format selects the format of the latitude and longitude position display . This menu choice is available only when in Advanced User Mode (see Setup Menu T ab: User Mode ). T o c hang e the P osition F orma t set ting: 1. Make sure you are in Advanced User Mode, then highlight Position F ormat on the Setup menu ...
-
Humminbird 383c - page 91
84 Date Format (Advanced, International only) Date Format changes the date f ormat used by the unit This menu choice is available only when in Advanced User Mode (see Setup Menu T ab: User Mode ). International Models only . Date Format selects the format for the date display when Time + Date is selected as a Digital Readout on the Sonar View . (se ...
-
Humminbird 383c - page 92
85 NMEA Output (Advanced) NMEA Output turns the NMEA* output on or off . This menu choice is available only when in Advanced User Mode (see Setup Menu T ab: User Mode. ) NMEA Output should be turned On if you connect the NMEA Output wires of the GPS Receiver cable t o another NMEA- compatible device, such as an aut opilot. *NMEA 0183 is a National ...
-
Humminbird 383c - page 93
86 Views Menu T ab From any view , press the MENU key twice to access the tabbed Main Menu System, then press the RIGHT 4 -W A Y Cursor Contr ol key until the Views tab is selected. This menu tab allows you to set the available views t o either hidden or visible in the view rotation. The view will be removed from the view r otation if it is set to ...
-
Humminbird 383c - page 94
87 T roubleshooting Before con tacting the Humminbird® Customer Resource Cent er , please read the following section. T aking the time to review these tr oubleshooting guidelines may allow you to solve a performance problem yourself , and therefore avoid sending your unit back for r epair . 300 Series™ Doesn’t Power Up If your 300 Series™ Fi ...
-
Humminbird 383c - page 95
88 Display Problems There are several main conditions or sources of possible in terference that may cause problems with the quality of the information displayed on the c ontrol head. Look in the following table for some sympt oms of display problems and possible solutions: Problem Possible Cause The control head loses power at high speeds. When the ...
-
Humminbird 383c - page 96
89 Finding the Cause of Noise Electrical noise usually affects the display with many black dots at high speeds , and high sensitivity readings. One or more of the following sources can cause noise or interference: Possible Source of Noise Isolation Other electronic devices The boat’ s engine Cavitation from the boat’ s propeller T urn off any n ...
-
Humminbird 383c - page 97
90 Specifications Depth Capability .......................................................................................... 1000 ft (330 m) Power Output ........................................ 300 W atts (RMS), 2400 W atts (Peak t o Peak) Operating Frequency ........................................ 200 kHz and 83 kHz DualBeam PLUS TM Area of Cov ...
-
Humminbird 383c - page 98
91 Glossary Sonar T erms: Alarm, Depth: Depth Alarm is a user - controllable, audible alert that sounds when depth is less than or equal to the set ting. Alarm, T emperature: T emperature Alarm is a user - contr ollable, audible alert that sounds when the water surface temperature equals the set ting. Backlight: Backligh t is a user - contr ollable ...
-
Humminbird 383c - page 99
92 Chart Speed: Char t Speed is a user - con trollable feature that sets the speed at which sonar information moves across the display . A faster setting displays sonar information from more pings and shows more detail, but the inf ormation moves quickly across the display: a slower set ting permits viewing of more sonar history , but does not disp ...
-
Humminbird 383c - page 100
93 Fish Arch: A Fish Arch is the apparen t "arch" that appears on the display when any object moves through the sonar c one. The arch results from a gradual decrease in distance t o an object as it moves into the sonar c one. The distance to an object changes due to the conical shape of the sonar beam, which causes the distance t o be gre ...
-
Humminbird 383c - page 101
94 the apparent sensitivity because the weak er signals appear bolder . Inverse grayscale works well in very clear water . Debris-laden water often appears as a lot of clut ter on the screen. Instant Image Update: Instant Image Update is a Humminbird® f eature that updates all the sonar information on the display when Sensitivity and a variety of ...
-
Humminbird 383c - page 102
95 resolution (vertical multiplied by horizontal) is often less important than the "V er tical Pixel" resolution. See Pix els, V ertical . Pixels, V er tical: V ertical Pixels are a number of vertical picture elements in a single column on an L CD display . A greater number of vertical pixels provide finer resolution of targets detected b ...
-
Humminbird 383c - page 103
96 All cable connections are made when installing, so that no separate wiring connections are required. Additionally , the mount off ers 90 ° tilt and 360 ° swivel capability to adjust the viewing angle of the unit as you move about the boat. Real Time Sonar: Real Time Sonar is a Humminbird® tec hnology that delivers ultra-fast sonar transmit te ...
-
Humminbird 383c - page 104
97 Sonar Echo Enhancement: Sonar Echo Enhancement is a Humminbird® f eature that describes the high degree of sonar sensitivity achieved thr ough a combination of transmit ter/r eceiver and software algorithms. The result of Sonar Echo Enhancemen t is to display virtually every thing in the water that is of interest t o the angler , including bait ...
-
Humminbird 383c - page 105
98 T arget Separation: T arget Separation is the measurement of minimum distance that a fishfinder needs to be able to r ecognize two very close objects as two distinc t targets (i.e. two fish hanging very close, or a fish hanging very close to structure). Humminbird® fishfinders provide a very good 2 1/2 inches of target separation in shallower t ...
-
Humminbird 383c - page 106
99 can send signals up to 60 times per second, as well as pr oduce the varying levels of power output needed for diff erent depths and conditions. Additionally , the transmit ter has the capability to create very precise sonar pulses needed for a high degr ee of target separation. Humminbird® receivers are extr emely sensitive, but within a narrow ...
-
Humminbird 383c - page 107
100 Zoom: Z oom is a feature that focuses in on a smaller ar ea of the bott om to provide enhanced resolution. With enhanced resolution, the angler can more easily see fish hanging in structure or multiple fish hanging close together . Split screen zoom divides the display into the full range view on the right, and the z oomed view on the left. Hum ...
-
Humminbird 383c - page 108
101 Cold Start: Cold Start refers t o the procedure that a GPS receiver must perform when it does not have historical information regarding its curr ent location. This procedure typically lasts for several minutes , and may be experienced upon first power up of the receiver , or if the receiver has been moved a great distance. Course Over Gr ound ( ...
-
Humminbird 383c - page 109
102 such as that included with many Humminbird® products , receives the signals from these satellites and is able t o determine position based on very slight differences in the time each signal is received and the receiver’ s knowledge of the location of each of the satellites. Heading: Heading describes the direction the boat is pointing and is ...
-
Humminbird 383c - page 110
103 Magnetic North. Humminbird® GPS units provide the option of selecting T rue or Magnetic readouts by using the North Reference menu. See Magnetic North. Present Position: Present P osition is the current location (latitude, longitude) determined by GPS. The Pr esent Position is indicated on-screen by a directional boat icon if the boat is movin ...
-
Humminbird 383c - page 111
104 T rack: A T rack is a series of saved points that define the past path of the boat. These T ra ck Points are saved at r egular time intervals. T racks are a useful and quick method t o see where you’ve been, and an easy guide to follow to get you bac k to the starting point. Generally , all GPS units have a limited number of T rack P oints th ...
-
Humminbird 383c - page 112
105 hole or anywhere else the user may want to r eturn to. Humminbird® pr oducts offer the ability to name and assign a symbol t o the saved location. Depth, Date and Time of Day when the waypoint was created is also saved. W aypoint T arget: Waypoin t T arget is a Humminbird® feature that displays a precise “bull’ s eye” around a selected ...
-
Humminbird 383c - page 113
106 Notes ...
-
Humminbird 383c - page 114
107 Notes ...
-
Humminbird 383c - page 115
108 Notes ...
-
Humminbird 383c - page 116
109 Notes ...
-
Humminbird 383c - page 117
110 Notes ...
-
Humminbird 383c - page 118
111 Contact Humminbird® Contact the Humminbird® Cust omer Resource Center in any of the following ways: By T elephone: (Monday - Friday 8:00 a.m. to 4:30 p.m. C entral Standard Time): 1-800 - 633-1468 By e-mail: (typically we respond to your e-mail within three business days ): custserv@johnsonoutdoors.com For direct shipping, our address is: Hum ...
Do you have a question concerning Humminbird 383c?
Use the form below
If you did not solve your problem by using a manual Humminbird 383c, ask a question using the form below. If a user had a similar problem with Humminbird 383c it is likely that he will want to share the way to solve it.