English dropdown-ico

Manual Avaya Cajun P882

750 pages 0.05 mb
Download

Go to site of 750

Summary
  • Avaya Cajun P882 - page 1

    Avaya P550R  , P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1 Document Revision 2.0 August 2002 ...

  • Avaya Cajun P882 - page 2

    I:P550-880-8 82v5.3.1CIA ndGAUserGuide Rev2.0Cover.fm — August 28, 200 2 4:34 pm ...

  • Avaya Cajun P882 - page 3

    Avaya P550R ® , P580, P880, and P882 Multiservice Switch Us er Guide, Version 5.3.1, Document Revision 2.0 © Copyright Avaya Inc., 2002 ALL RIGHTS RESERVED Produced in USA, August, 2002 The products, specifications, and other technica l information re garding the products contained in this document are subject to change without notice. All inform ...

  • Avaya Cajun P882 - page 4

    ...

  • Avaya Cajun P882 - page 5

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 i Table of Contents Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii Overview of the Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii Technical Support . . . . . . . . . . . . . . ...

  • Avaya Cajun P882 - page 6

    ii Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Table of Conte nts v5.2.2 Software Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-27 v5.2.0 Software Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-27 Routing Overview . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Avaya Cajun P882 - page 7

    Avaya P550R, P580, P880, and P882 Multiser vice Switch Us er Guide, v5.3.1 iii Table of Contents Setting Recurring Summer Time Hours . . . . . . . . . . . . . . . . . . . . . 3-5 Setting One-Time Summer Time Hours . . . . . . . . . . . . . . . . . . . . 3-10 Setting the System Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Avaya Cajun P882 - page 8

    iv Avaya P550R, P580, P8 80, and P882 Mu ltiservice Switch User Guide, v5.3.1 Table of Conte nts Using the All Ports Configuration Window . . . . . . . . . . . . . . . . . 5-22 Configuring Switch Port Parameters . . . . . . . . . . . . . . . . . . . . . . . . . 5-23 Configuring Switch Port Parameters . . . . . . . . . . . . . . . . . . . . . . 5-23 ...

  • Avaya Cajun P882 - page 9

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 v Table of Contents Enabling Redundant Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5 Replacing the Primary Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-7 Replacing an Element . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Avaya Cajun P882 - page 10

    vi Avaya P550R, P580, P8 80, and P882 Mu ltiservice Switch User Guide, v5.3.1 Table of Conte nts Displaying the IGMP Local Multicast Forwarding Cache . . . . . . 9-75 Displaying DVMRP Global Statistics . . . . . . . . . . . . . . . . . . . . . . 9-76 Displaying DVMRP Interface Statistics . . . . . . . . . . . . . . . . . . . . 9-78 Displaying DVMRP ...

  • Avaya Cajun P882 - page 11

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 vii Table of Contents Deleting OSPF Summaries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-20 Modifying OSPF Summaries . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-20 Monitoring Switch Performance Using OSPF Statistics . . . . . . . . . . 11-21 Dis ...

  • Avaya Cajun P882 - page 12

    viii Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Table of Conte nts Creating IPX SAP Network Filters . . . . . . . . . . . . . . . . . . . . . . . . 14-8 Interpreting IPX SAP Interface Statistics . . . . . . . . . . . . . . . . . . 14-13 Chapter 15 — Configuring Ap pleTalk Routing . . . . . . . . . . . . . . . . 15 ...

  • Avaya Cajun P882 - page 13

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 i x Table of Contents Managing IGMP Snooping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-20 Enabling IGMP Snooping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-21 Viewing IGMP Snooping Statistics . . . . . . . . . . . . . . . . . . . . ...

  • Avaya Cajun P882 - page 14

    x Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Table of Conte nts 19-23 Chapter 20 — Managing Buffers and Queues on 50-Series Modules . . 20-1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-1 How Queues Work . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Avaya Cajun P882 - page 15

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 xi Table of Contents Displaying the Queue-Service Settings . . . . . . . . . . . . . . . . . . . 21-46 QoS Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-47 Displaying QoS Statistics . . . . . . . . . . . . . . . . . . . . ...

  • Avaya Cajun P882 - page 16

    xii Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Table of Conte nts Load MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-4 Appendix D — FCC Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-1 Index . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Avaya Cajun P882 - page 17

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 xiii Preface Overview of the Contents This guide provides information an d procedures for configuring the Avaya P550R ® , P580, P880, and P 882 Multiservice switches with various protocols. You can use either the Web Agent or command line interface (CLI) to configure the swi ...

  • Avaya Cajun P882 - page 18

    xiv Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Preface ■ Chapter 7, Configuring Redundancy Options — Explains how to install, enable and configure redundancy hardware options on your switch. ■ Chapter 8, Configuring DNS Client — Explains how to configure DNS and RADIUS clients on your switch . ■ Chapter 9, ...

  • Avaya Cajun P882 - page 19

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 xv Preface ■ Chapter 20, Managing Buffers and Queues on 50-Series Modules — Explains how to use your switch’s buffer management features to optimiz e traffic throughput through the switch fabric. ■ Chapter 21, 80-Series QoS — Provides information about QoS and expla ...

  • Avaya Cajun P882 - page 20

    xvi Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Preface Conventions The following conventions are used throughout this guide: Convention Represents Examples User Input User entered te xt. To create a new password, type store password root . Boldface Text Represents a menu command, a keyword to be acted upon , or a bu ...

  • Avaya Cajun P882 - page 21

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 xvii Preface The words Select and Click . In this guide: Select means to point and click on a specific item that that opens another dialog box, window, op tion box, etc. Click means to point t o an action and press the left mouse button once to perform an op eration. Select C ...

  • Avaya Cajun P882 - page 22

    xviii Avaya P550R, P580, P880, an d P882 Multiservice Switch User Guide, v5.3.1 Preface Using Notes, Cautions, and Warnings The following text and icon conventions are used in this guide for Notes, Cautions, and Warnings. * Note: Provides additional information about a procedure or topic. WARNING Indicates a condition th at may cause bodily injury ...

  • Avaya Cajun P882 - page 23

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 xix Preface Online Help You must have a browser installed on your system in order to use the on-line help. * Note: If you are using Netscape ® , use version 4.5 or later. Also, you must configure the Proxies to: Direct Connection to the Internet . Open: Edit > Prefere nce ...

  • Avaya Cajun P882 - page 24

    xx Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Preface To install the HTTP documentation server: ■ Run the Setup program from the DocsCD CD-ROM Or ■ Go to the Avaya Product web site: www.avaya.com/support . • Click on Lan and Backbone Switches . • Click on P882/P580 Multiservice Switch • Click on Technical ...

  • Avaya Cajun P882 - page 25

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 xxi Preface * Note: If you decide to install your onl ine help on a Web server other than the HTTP server bundled on the DocsCD CD-ROM, you can specify the URL without a port number if your Web server runs on port 80 (for example, http://www.abc-company. com ). 5. Select Appl ...

  • Avaya Cajun P882 - page 26

    xxii Avaya P550R, P580, P8 80, and P882 Mu ltiservice Switch User Guide, v5.3.1 Preface Downloading an Updated DocsCD CD from the Internet The server and help files are ava ilable on the Internet. To download updated files from the Internet to your DocsCD CD direct ory: 1. Launch a web browser. 2. Go to the docs Web page at: http://support.avaya.co ...

  • Avaya Cajun P882 - page 27

    Avaya P550R, P580, P880, and P882 Multiser vice Switch Us er Guide, v5.3.1 xxiii Preface Documentation Feedback If you have comments about the technical accuracy or general quality of this document please send an e-mail to: *lsg-CTechpubs@Avayactc.com Please cite the document title, part number (if applicable), and page reference. ...

  • Avaya Cajun P882 - page 28

    xxiv Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Preface ...

  • Avaya Cajun P882 - page 29

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 1-1 1 Introduction Overview The following information is provided in this chapter: ■ Switch Descriptions ■ Hardware Components ■ Software Features ■ New Software Features ■ Routing Overview Switch Descriptions The Avaya P550R, P580, P880, and P882 M ultiservice swit ...

  • Avaya Cajun P882 - page 30

    1-2 Avaya P550R, P580, P880, and P882 Mu ltiservi ce Switch User Guide, v5.3.1 Chapte r 1 Hardware Components The Avaya Multiservice switch in cludes the following hardware components: Chassis The Avaya switch ch assis comes in four models: ■ The P550R and P580 chassis ■ The P880 and P882 chassis. The P580 and P882 chassis can run in two mo des ...

  • Avaya Cajun P882 - page 31

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 1-3 Introduction In Fabric mode 2, the P580 chassis will have a 13x1 3 crossbar switching fabric, while the P882 chassis will have a 33x33 cross bar switching fabric. All 17 slots in the P882 ch assis can be used in Fabric 2 mode. Avaya P550R and P580 Multis ervice Switch Cha ...

  • Avaya Cajun P882 - page 32

    1-4 Avaya P550R, P580, P880, and P882 Mu ltiservi ce Switch User Guide, v5.3.1 Chapte r 1 Fan Tray There are two fan assemblie s in th e chassis. One fan assembly is located on the left side of the chassis to provide air flow to the media modules. This fan assembly is hot-swappable. The other fan assembly is located in the rear of the chassis to pr ...

  • Avaya Cajun P882 - page 33

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 1-5 Introduction The crossbar supports: ■ 13 fabric ports (two per I/O module slot, one for the supervisor module). ■ 1.76 Gbps (in and out) on each fabric port in 5 0-series mode and 2.11 Gbps (in and out) on each fabric port in Fabric mode 2. ■ 45.76 Gbps backplane ca ...

  • Avaya Cajun P882 - page 34

    1-6 Avaya P550R, P580, P880, and P882 Mu ltiservi ce Switch User Guide, v5.3.1 Chapte r 1 ■ Up to 720 10/100BASE-TX ports (Telco connector, autosensing) ■ Up to 150 100BASE-F X ports ■ Up to 60 gigabit-speed Ethernet po rts With 80-Series modules, the P880/P882 chassis supports: ■ Up to 384 10/100BASE-TX ports (RJ-45 connector, autosensing) ...

  • Avaya Cajun P882 - page 35

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 1-7 Introduction The Avaya P880/P882 Multiservice swit ch chassis crossbar supports: ■ 33 fabric ports (two per I/O module slot, plus one for th e supervisor module - Fabric mode 2). ■ 1.76 Gb/s (in and out) on each fabric port in Fabric mode 1 and 2.11 Gb/s (in and out) ...

  • Avaya Cajun P882 - page 36

    1-8 Avaya P550R, P580, P880, and P882 Mu ltiservi ce Switch User Guide, v5.3.1 Chapte r 1 Layer 3 Supervisor Module Layer 3 Supervisor module is part of the path that some packets take through the system. The 50-Series layer 3 supervisor modules features are: ■ PowerPC 750 (RISC) processor ■ Memory: 4 MB Flash, 64 MB DRAM, 128 KB NVRAM, 512 KB ...

  • Avaya Cajun P882 - page 37

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 1-9 Introduction Figure 1-2. Layer 3 Superv isor Conceptual Operation Redundant Supervisor The redundant supervisor module is an auxiliary (standby) supervisor module that acts as a fault-tolerant supervisor in the event that the active supervisor fails. The redundant supervi ...

  • Avaya Cajun P882 - page 38

    1-10 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 1 Media Modules All of the layer 3 media modules have the same general function as the layer 3 supervisor module except for the following: ■ The number and type of physical interfaces ■ Hardware-based routing and b ridging capacity Bridging and routing are ...

  • Avaya Cajun P882 - page 39

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 1-11 Introduction ■ 48-Port, 10/100BASE-TX Ethernet mod ule (layer 2 support), with 4 RJ-21 Telco Connectors – 10/100, HDX/FDX, 100M (M5548N-100TC) ■ 10-Port 100BASE-FX Ethernet mo dule (layer 2 and layer 3 support), with 10 Fast Ethernet Ports – Fiber, 1300 nM, HDX/ ...

  • Avaya Cajun P882 - page 40

    1-12 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 1 * Note: 802.1p packets that are received with a tag priority of 0 on a 50 series L2 (non-routing) module, but which must be routed via the FORE path o n an 80 series supervisor, will be queued and transmitted with a priority of 4. Refer to the "Routing ...

  • Avaya Cajun P882 - page 41

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 1-13 Introduction 80-Series Modules The Avaya P550R/P580/P880/P882 Mu ltiservice switches support the following 80-Series modules: ■ 4-port, Gigabit Interface Card (GBIC) based module — This module can be configured with up to 4 GBIC optical modules and the GBIC optical m ...

  • Avaya Cajun P882 - page 42

    1-14 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 1 ■ 4-Port 1000BASE-T Ethernet module (layer 2 and layer 3 support), with 4 RJ-45 ports, 100M (M80 04R-1000T) ■ 8-Port 1000BASE-T Ethernet module (layer 2 and layer 3 support), with 8 RJ-45 ports, 100M (M80 08R-1000T) ■ Layer 3 Supervisor Module with PCM ...

  • Avaya Cajun P882 - page 43

    1-15 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 1 Flood Pruning Using VLANs VLANs provide ne twork managers with two significant capabilities: ■ The ability to segment traffic in a flat switched network. This helps prevent traffic from being forwarded to sta tions where it is not needed. ■ The ability t ...

  • Avaya Cajun P882 - page 44

    1-16 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 1 Hunt Groups Hunt groups allow you to ag gregat e bandwidth from multiple ports so they act as one high-bandwidth switch port. Hunt groups create multi-gigabit pipes to transport tr affic through the highest traffic areas of your network. You can create hunt ...

  • Avaya Cajun P882 - page 45

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 1-17 Introduction Load MIB The switch Load MIB defines upload , download and copy of application software and configur ation information. The Load MIB consists of two tables: ■ The genOpTable — a conceptual table where e ach row represents a file operation that can be per ...

  • Avaya Cajun P882 - page 46

    1-18 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 1 Figure 1-4. Spanning Tree Models IEEE802.1D Spanning Tr ee Protocol Option All Avaya Multiservice switches participate in a Single Spanning Tree domain in the IEEE802.1D STP mode. All ports with STP configured belong to the sa me spanning tree domain a nd ru ...

  • Avaya Cajun P882 - page 47

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 1-19 Introduction Per VLAN Spanning Tree is th e recommended method whe never many VLANs are passed over in tersw it ch links, but not every VLAN resides on every interswitch link. If IEEE 802.1D Spanning Tree mode is used without care under these constraints, VL ANs can be s ...

  • Avaya Cajun P882 - page 48

    1-20 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 1 In the previous example, all three multiservice switches participate in two Spanning Tree domains: ■ Domain for VLAN A containing three bridges ■ Domain for VLAN B containing three bridges with the legacy domain remaining separate. The legacy devices nee ...

  • Avaya Cajun P882 - page 49

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 1-21 Introduction Extensive Fault Tolerance All multiservice switches are desi gned to function as backbone switches. You can install each switch in your network’s core without creating a single point of failure. Extensive fault tolerance features include: ■ N+1 power. Po ...

  • Avaya Cajun P882 - page 50

    1-22 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 1 ■ Two CoS priority queues for 50-Series modules and eight CoS priority queues for 80-Series modules provide flexible queue management alg orithms to meet application requirements. ■ Configurable queue depth for ea ch prioritized packet queues. ■ Config ...

  • Avaya Cajun P882 - page 51

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 1-23 Introduction — Policing, which makes it poss ible for you to limit the bandwidth for ingress traffic and drops frames when traffic exceeds the limit. — New CLI commands for setting queue servicing for egress traffic. — Ability to view and reset QoS statistics. — ...

  • Avaya Cajun P882 - page 52

    1-24 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 1 — Users logged in as manuf , diag , or root can change their own passwords. However, these passwords revert to the default passwords when you initialize NVRAM ( nvram initialize ). For information on how to disable the manu f and diag accounts, see “Disa ...

  • Avaya Cajun P882 - page 53

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 1-25 Introduction — LEC MIB (documented by ATM Forum in specification AF-LANE-0093.000) v5.2.10 Software Features The following software features were implemen ted in v5.2.10: ■ Non-Broadcast Multi-Access (NBMA) IP Interfaces This feature makes it possible for the switc h ...

  • Avaya Cajun P882 - page 54

    1-26 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 1 v5.2.6 Software Features The following software features were implemented in v5.2.6: ■ The following Queue Cla ssification and Servicin g features: — Classification of layer 2 traffic by: • Source MAC address • Destination MAC address • Differentia ...

  • Avaya Cajun P882 - page 55

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 1-27 Introduction ■ Ability to reset the switch remotely by using SNMP. For more information about using SNMP to reset the switch remotely, see the “Performing a Reset” on page 3-17. v5.2.2 Software Features The following software features were implemen ted in v5.2.2: ? ...

  • Avaya Cajun P882 - page 56

    1-28 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 1 ■ Enhancement of the MAC Ad dress Lock feature. This feature has been av ailable in all previous releases. If a source MAC address is locked at a port (statically configured), a frame with that source MAC w ill be filtered if received on any other port on ...

  • Avaya Cajun P882 - page 57

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 1-29 Introduction This section provides the following sections: ■ Compatibility with Layer 2 Modules ■ Routing with Layer 2 and Layer 3 Modules Compatibility with Layer 2 Modules Each switch is comple te ly backward compatible with all of the layer 2 media modules that th ...

  • Avaya Cajun P882 - page 58

    1-30 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 1 This process creates three distinct results: ■ All known (learned) layer 3 traffi c that requires routing, is routed directly by the 50 series layer 3 or 80 series media module without a need to traverse the switching fab ric to get to the supervisor modul ...

  • Avaya Cajun P882 - page 59

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 2-1 2 Initialize and Setup Overview The following information and procedures that are provided in this chapter are common to both layer 2 and layer 3 module configuration: ■ Setting Up Your Laptop or PC Monitor ■ Configuring the Supervisor Module Using the CLI ■ ...

  • Avaya Cajun P882 - page 60

    2-2 Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 2 Setting Up Your Laptop or PC Monitor You need a laptop or PC to make a serial line connection to the switch to complete initial switch setup. Table 2-1 lists the settings required for the laptop o r PC mo nitor to communi cate with the switch. Managing t ...

  • Avaya Cajun P882 - page 61

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 2-3 Initializ e and Setup Once logged into the switch via te lnet sessio n, you can manage the switch using the CLI command s. For more information on CLI commands, see the Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, Versio ...

  • Avaya Cajun P882 - page 62

    2-4 Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 2 123.123.123.123:1211 Telnet session expiration timer Once a telnet session is establis hed, the session will remain open while there is activity. However, if the session is left idle, the session will expire and will be automatically terminated based on ...

  • Avaya Cajun P882 - page 63

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 2-5 Initializ e and Setup Figure 2-1. Avaya P550R/P580 Multiservice Switch Front View 2. Run a terminal emulation pr ogram (HyperTerminal, for example) on the attached laptop or PC. Verify that the laptop or PC monitor settings match those listed in Table 2-1. 3. Powe ...

  • Avaya Cajun P882 - page 64

    2-6 Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 2 Waiting for power cycle to complete ( Th e 17 second power c ycle option ) Module 2 Powered Initializing the module subsystem... done System initialization complete. Configuring system from Startup Confi g file [/nvram/ startup.txt]... done Boot process ...

  • Avaya Cajun P882 - page 65

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 2-7 Initializ e and Setup 6. Complete the following steps to change the co mmand mode to the configure mode: a. Enter the enable command. b. Enter the configure command . 7. Enter the setup command . This i nitiates a series of queries. Answer each query as follows: a ...

  • Avaya Cajun P882 - page 66

    2-8 Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 2 User password changed successfully What do you want the switch manager's console Ethernet IP Address to be [0.0.0.0]? 10.0.0.1 What is the subnet mask for your network's IP address [0.0.0.0]? 255.255.255.0 What is the IP addre ss of the default ...

  • Avaya Cajun P882 - page 67

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 2-9 Initializ e and Setup Configuring the Switch Using the Web Agent The switch provides an embed ded HTTP server that allows you to set all the switch’s parameters from the Web Agent. You can use this interface for quick and simple confi guration changes. Refer to ...

  • Avaya Cajun P882 - page 68

    2-10 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 2 open the Web Agent. For information about how to change the TCP port for HTTP requests, see Changing the TCP P orts for HTTP and Telnet (page 43) . * Note: You must enter a separate IP address for each supervisor module interfac e (console or inband ) ...

  • Avaya Cajun P882 - page 69

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 2-11 Initializ e and Setup Figure 2-3. General Information Window Moving through the Web Agent To move through the Web Agent screens: 1. Select the plus sign (+) next to the folder that you want to open. That folder opens listing the operations you can perform (Figure ...

  • Avaya Cajun P882 - page 70

    2-12 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 2 Figure 2-5. Operation Folder Contents 3. Select an operation (i.e., General Information ). The Web Agent dialog box for that operation opens on the righ t side. 4. Complete the operation. * Note: The following configuration procedures are written assu ...

  • Avaya Cajun P882 - page 71

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 2-13 Initializ e and Setup Opening the Custom Access Types Web Page To open the Custom Access Types Web page: 1. Select System > Administration from the left side of the switch web screen (Figure 2-6) Figure 2-6. Opening the Custom Access Types Web Screen 2. Select ...

  • Avaya Cajun P882 - page 72

    2-14 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 2 Figure 2-7. Custom Access Types Web Screen Creating a Custom Access Type To create a Custom Access Type: 1. Open the Custom Access Types web screen (refer to the "Opening the Custom Access Ty pes Web Page" se ction earlier in this chapter). ...

  • Avaya Cajun P882 - page 73

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 2-15 Initializ e and Setup 4. Select which features that you want this access type to support from the Accessible Features list. 5. Select Apply to save the Access Type or Cance l to ignore the Access Type. Creating Custom Access Types with the CLI To create a Custom ...

  • Avaya Cajun P882 - page 74

    2-16 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 2 Figure 2-9. Modify Custom Access Type Web Screen 4. Select or de-select the accessibl e features you want to add or remove for this acce ss type from the Accessib le Features list. 5. Select Apply to save the modification to the specific access type o ...

  • Avaya Cajun P882 - page 75

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 2-17 Initializ e and Setup Figure 2-10. Delete Custom Access T ype Confirmation Screen 4. Select Yes to delete the selected Access Type or No to keep the access type. * Note: User accounts that have been created with this access type will no longer be able to log into ...

  • Avaya Cajun P882 - page 76

    2-18 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 2 Figure 2-11. User Account Management Dialog Box 2. Select Add . The Add User Account dialog box opens (Figure 2-12). Figure 2-12. Add User Account Dialog Box. 3. Enter a user name in the User Name field. (up to32 characters) 4. Enter a password in the ...

  • Avaya Cajun P882 - page 77

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 2-19 Initializ e and Setup 6. Select an access type from the Access Type field pull-down menu. The options are: ■ READ_ONLY ■ READ_WRITE ■ ADMINISTRATOR ■ Custom Access Types - The Cu stom Access list names you created will display (previously configured Custo ...

  • Avaya Cajun P882 - page 78

    2-20 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 2 3. Select the check box next to the manuf or diag account th at you want to disable. 4. Select Modify . The Modify User Account Web page opens. 5. In the Status field, select Disable . CLI Command To disable the user accounts using the CLI, enter the ...

  • Avaya Cajun P882 - page 79

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 2-21 Initializ e and Setup Figure 2-14. Create SNMP Community Dialog Box 3. Enter a name for the SNMP community in the Community String field. 4. Select an option from the IP Address field pull-down menu. The options are: • Any – for any IP address • Specific ? ...

  • Avaya Cajun P882 - page 80

    2-22 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 2 6. Select a security level from the Security Level pull-down menu (refer to Table 2-4). 7. Select Enable from the Trap Receiver field pull-down menu. The default is Disable. * Note: Select Enable only if you selected Spe cific from the IP Address fiel ...

  • Avaya Cajun P882 - page 81

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 2-23 Initializ e and Setup Setting Up SNMP Communities Using the CLI To set the SNMP communities para meters using the CLI, enter the following command: <configure># snmp-server community <community-string>{none|ro|rw}[{no rmal| admin}] <catName|ip-addr ...

  • Avaya Cajun P882 - page 82

    2-24 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 2 6. Select the scroll arrow located on the right of the Access List field. The custom access list names you created will display. 7. Select a custom access list name for the user. 8. Select Apply to give the user th e access type or select Cancel to ig ...

  • Avaya Cajun P882 - page 83

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 2-25 Initializ e and Setup RADIUS configuration, you will not be able to create user accounts that are Read-Write. Realms & Groups Realms and Groups provide two separate f unctions. A Realm provides a way of organizing user accounts on the RADIUS server. Groups pr ...

  • Avaya Cajun P882 - page 84

    2-26 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 2 message with user Bob@AvayaRealm. The RADIUS server, u pon receiving the request, would l ook for Bob in the AvayaRealm. Groups & RADIUS with Vendor Specific Attributes (VSA) In order to provide user accounts with the same gr anularity of privileg ...

  • Avaya Cajun P882 - page 85

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 2-27 Initializ e and Setup Login Order of Operations When a user attempts to log into the Avaya switch, the switch will first check the local user account s for the entered user name and password. If found, the user is lo gged in using the local settings for that acco ...

  • Avaya Cajun P882 - page 86

    2-28 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 2 Sample User File The following is a sam ple user file. Each RADIUS vendor may have a different method for config uring User files. In this sample, text values are defined that repres ent the actual values used by the Avaya switch using the directives ...

  • Avaya Cajun P882 - page 87

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 2-29 Initializ e and Setup Configuring a RADIUS Client Using the Web Agent To configure a RADIUS client using the Web Agent: 1. Select RADIUS from the System > Administration group on the Web Agent window,. The RADIUS dialog box opens (Figure 2-15). Figure 2-15. RA ...

  • Avaya Cajun P882 - page 88

    2-30 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 2 3. Refer to Table 2-6 to config ure the RADIUS dialog box configuration parameters; Table 2-6. RADIUS Dialog Box Configuration Parameters Parameter Definition Enable State Enable or disa ble RADIUS on the switch. Primary Server • IP Address - Enter ...

  • Avaya Cajun P882 - page 89

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 2-31 Initializ e and Setup Configuring a RADIUS Client Using the CLI To configure a RADIUS client using the CLI, enter the following command from Enable/Configure mode: <configure># set radius authentication <parameters> Refer to the Command Reference Guid ...

  • Avaya Cajun P882 - page 90

    2-32 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 2 Changing the Console Serial Port Settings You can change the communications settings for the serial port connection located on the front pa nel of the layer 3 supervisor module from the Web Agent. The switch’s console port is initially configured as ...

  • Avaya Cajun P882 - page 91

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 2-33 Initializ e and Setup Figure 2-16. Console Configurati on Window 2. Select TTY as the console type and click SELECT . The Console Port Configuration window opens with TTY displayed in the Console Type field (Figure 2-17). ...

  • Avaya Cajun P882 - page 92

    2-34 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 2 Figure 2-17. Console Port Configura tion Window. 3. Refer to Table 2-7 and configure the other Console Port Configuration dialog box parameters: 4. Click APPLY to save your changes, or CANCEL to clear your selection. Configuring the Serial Console Por ...

  • Avaya Cajun P882 - page 93

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 2-35 Initializ e and Setup Configuring the Serial Console Port as a PPP Console You can reconfigure the serial port as a PPP con sole to support a dial-in PPP connection using either the Web Agent or the CLI . Before you can do so, however, you must connect a modem to ...

  • Avaya Cajun P882 - page 94

    2-36 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 2 Figure 2-18. Typical Modem Conne ction to a Switch Using the Web Agent To configure the console serial port as a PPP console from the Web Agent: 1. Select Console from the System > Configuration group on the Web Agent. The Console Configuration dia ...

  • Avaya Cajun P882 - page 95

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 2-37 Initializ e and Setup Figure 2-19. Console Configurati on Window 2. Select PPP as the console type and click SELECT . The Console Port Configuration window opens with PPP displayed as the Console Type (Figure 2-20). * Note: If you select PPP , the PPP Console Por ...

  • Avaya Cajun P882 - page 96

    2-38 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 2 Figure 2-20. PPP Console Configuration Window. 3. Select a baud rate from the Baud Rate field pull-down menu that is different from th e one already selected. 4. Select an option from the Flow Control field pull-down menu. The options are: No ne and X ...

  • Avaya Cajun P882 - page 97

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 2-39 Initializ e and Setup * Note: If you misconfigure the PPP serial console port, you can regain CLI access to correct the configuration parameters. For more info rmation, refer to the “ Using the CLI ” section later in this chapter. Safety Tip: To successfully ...

  • Avaya Cajun P882 - page 98

    2-40 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 2 Regaining Configuration Access to the PPP Serial Port Console If you incorrectly configure the PPP serial port console, you cannot regain configuration ac cess to the Web Agent or the CLI. This is a temporary situation and can corrected. To regain con ...

  • Avaya Cajun P882 - page 99

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 2-41 Initializ e and Setup 4. Enter a connection name for the computer you are dialing in the Type a name for the computer you are dialing field. 5. Open the Select a Modem pull-down menu. 6. Select your modem and select Configure . The Modem Properties window opens. ...

  • Avaya Cajun P882 - page 100

    2-42 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 2 21. Select Specify an IP Address and enter the IP address fro t he serial port interface. 22. Select Server assigned name server ad dresses. 23. De-selec t Use IP header Compression and Use Default Gateway on remote network. 24. Select OK to close the ...

  • Avaya Cajun P882 - page 101

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 2-43 Initializ e and Setup Changing the TCP Ports for HTTP and Telnet Overview For security purposes, you may want to change the TCP port number for Telnet requests and H TTP requests. The default settings for these ports are the well-know n T CP ports. HTTP requests ...

  • Avaya Cajun P882 - page 102

    2-44 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 2 Figure 2-21. TCP Ports Web page 3. To change the TCP port for Telnet requests, in the Telnet Port field, enter the port number that you want to use. Valid port numbers are 23 or a port number from 9000 through 65355. 4. To change the TCP port fo r HTT ...

  • Avaya Cajun P882 - page 103

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 2-45 Initializ e and Setup * Note: You must be in Global Configuration mod e and have administrative privilege to enter the ip telnet port and ip http port commands. Use the following command to view the current TCP port settings for Telnet an d H TTP: show tcp config ...

  • Avaya Cajun P882 - page 104

    2-46 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 2 Opening the Web Agent After changing the TCP port for HTTP requests to a port number other than 80, you must specify the TCP port number in addition to the IP address to open the Web Agent. For example, if you change the TCP port from 80 to 9999 on sw ...

  • Avaya Cajun P882 - page 105

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 2-47 Initializ e and Setup Viewing Your Startup Configuration To view your startup configuration: ■ Select Startup Config from the Configuration Management group on the Web Agent window. The Startup Configuration dialog box displays Or ■ Enter the following comman ...

  • Avaya Cajun P882 - page 106

    2-48 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 2 * Note: Configuration files are au toma tically saved as text files using the *.txt extension on your switch. If you save the new file to a T FTP server, you can edit the startup.txt file using a text editor of your choice and save copies of it with a ...

  • Avaya Cajun P882 - page 107

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 2-49 Initializ e and Setup Using the CLI To save your running configuration as your startup configuration in NVRAM using the CLI, enter the following command in Enable mode: ># copy running-config startup-config Refer to the Command Reference Guide for the Avaya P5 ...

  • Avaya Cajun P882 - page 108

    2-50 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 2 Figure 2-23. Configuration File Management Dia log Box 2. Refer to Table 2-9 for an explanation of the Configuration File Management di alog box parameters. Table 2-9. Configurati on File Management Dialog Box Param eters Parameter Description Options ...

  • Avaya Cajun P882 - page 109

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 2-51 Initializ e and Setup — File — To copy a file stored on the switch to your running or startup configuration, to a location on the switch, or to a location on a TFTP server. — TFTP Server — To copy a file stored on a TFTP server to your running or startup ...

  • Avaya Cajun P882 - page 110

    2-52 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 2 3. Select one of the following from the Copy Destination pull-down menu. — Running-Config — Copies your startup configuration, or other file located on the switch or on a TFTP server, to your running configuration. — Startup-Config — Copies yo ...

  • Avaya Cajun P882 - page 111

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 2-53 Initializ e and Setup Using the CLI To copy files using the CLI, enter the following command in Enable mode : ># copy running-config + * Note: Entering a “+” sign lists all of the applicable options for the copy running-config command Refer to the Command ...

  • Avaya Cajun P882 - page 112

    2-54 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 2 ...

  • Avaya Cajun P882 - page 113

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 3-1 3 Configuring System Information Overview You can manage system information by using either the Web Agent or the CLI. The following proced ures to manage your system information are provided in this chapter: ■ Entering General System Information ■ Enabling the Simple ...

  • Avaya Cajun P882 - page 114

    3-2 Avaya P550R, P580, P880, and P882 Mu ltiservi ce Switch User Guide, v5.3.1 Chapte r 3 ■ Device location ■ Device contact To enter general system inform ation from the Web Agent: 1. Select General Information from the System group on th e Web Agent window. The General Information dialog box opens (Figure 3-1). Figure 3-1. System Information ...

  • Avaya Cajun P882 - page 115

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 3-3 Configuring System Informat ion One-Time Summer Time Hours” later in this chapter. For information about setting Summer Time Hours, refer to “Setting Summer Time Hours” later in this chapter. Web Agent Procedure To enable SNTP on your switch using the Web Agent: 1. ...

  • Avaya Cajun P882 - page 116

    3-4 Avaya P550R, P580, P880, and P882 Mu ltiservi ce Switch User Guide, v5.3.1 Chapte r 3 Figure 3-3. SNTP Client Configuratio n Dialog Box 3. Select Enable from the Enable State pull-down menu. The default is Disable. 4. Enter the server IP address in the Server IP address field for the switch on which you want to enable SNTP. 5. Click APPLY to sa ...

  • Avaya Cajun P882 - page 117

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 3-5 Configuring System Informat ion Many parts of the world follow a o ne-time change o f Summer Time Hours. When you configure the swit ch for these locations, you reset the clock by specifying a scheduled time and date . This section provides the following procedures: ■ S ...

  • Avaya Cajun P882 - page 118

    3-6 Avaya P550R, P580, P880, and P882 Mu ltiservi ce Switch User Guide, v5.3.1 Chapte r 3 Figure 3-4. System Clock Dialog Box 2. Select Summer Time Hours Algorithm from the Clock Options field. The Summer Time Hours Configuration dialog box opens (Figure 3-5). ...

  • Avaya Cajun P882 - page 119

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 3-7 Configuring System Informat ion Figure 3-5. Summer Time Hours Dialog Box 3. Select Enable from the Enable State pull-down menu. 4. Enter the reset value for the clock in minutes in the Offset field. For example, if you intend to reset the clock forward or backward by one ...

  • Avaya Cajun P882 - page 120

    3-8 Avaya P550R, P580, P880, and P882 Mu ltiservi ce Switch User Guide, v5.3.1 Chapte r 3 Refer to Table 3-1 for detailed informat ion about the fields in the Recurring Summer Time Hours sect ion of the Summer Time Hours Configuration dialog box. Table 3-1. Recurring Summer T ime Hours Parameters Parame ter Definition Recurring Select if the Summer ...

  • Avaya Cajun P882 - page 121

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 3-9 Configuring System Informat ion CLI Command To set recurring Summer Time Ho urs using the CLI, enter the following command from Configure mode: <configure># clock summer-time recurring <week> Refer to the Command Reference Guide for the Avaya P550R, P580, P8 8 ...

  • Avaya Cajun P882 - page 122

    3-10 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 3 Setting One-Time Summer Time Hours You can set one-time summe r time hours using either the Web Agent or the CLI. Web Agent Procedure To set Summer Time Hours that are not based on a standard rule using the Web Agent: 1. Select System Clock from the System&g ...

  • Avaya Cajun P882 - page 123

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 3-11 Configuring System Informat ion CLI Command To set Summer Time Hou rs that are not based on a standard rule using the CLI, enter the following co mmand from Configure mode : <configure># clock summer-time date Refer to the Command Reference Guide for the Avaya P550 ...

  • Avaya Cajun P882 - page 124

    3-12 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 3 Figure 3-6. System Clock Dialog Box 2. Enter the time in the Current Time Setting Hour, Minutes, and Seconds fields using 24-h our time format (for example, 10 p.m. is 22:00 00. 3. Select the time zone for your area from the Time Zone pull-down menu. 4. Ente ...

  • Avaya Cajun P882 - page 125

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 3-13 Configuring System Informat ion Setting the Temperature System You can set the upper and lower temperature warning systems for your switch’s backplane and sl ot 1. These warning systems cause the following to happen if the temperatures you set are reached: ■ The Supe ...

  • Avaya Cajun P882 - page 126

    3-14 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 3 Figure 3-7. Temperature System Window 2. Enter your desired temperature warnings in the Slot 1 Sensor , and the Backplane Sensor fields. * Note: The Slot 2 Sensor column is displayed if the switch has a standby supervisor. However, temperature settings are d ...

  • Avaya Cajun P882 - page 127

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 3-15 Configuring System Informat ion Displaying the Power System Statistics You can display the statistics for your switch’s power system from the either the Web Agent and the CLI. Web Agent Procedure To display your switch’s power system statistics using the Web Agent: 1 ...

  • Avaya Cajun P882 - page 128

    3-16 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 3 * Note: You will see 1400W of availa ble power displayed in the Total System Power field if you have three power supplies installed. The switch only uses power from two of the three power supplies. The third power supply is a redundant power supply and is us ...

  • Avaya Cajun P882 - page 129

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 3-17 Configuring System Informat ion Figure 3-10. P880/P882 Cooling System Status window 2. Check the Status column to ensure that all the individual components are operational. 3. If a component’s status is non-operational, power down the switch and contact a service repre ...

  • Avaya Cajun P882 - page 130

    3-18 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 3 Figure 3-11. System Reset Page Window 2. Select Save to save your Running Configuration (Running-Config to the startup configuration (Startup-Config before pe rforming a system reset. * Note: If you do not save your Running-Config to Startup-Config before yo ...

  • Avaya Cajun P882 - page 131

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 4-1 4 Using VLANs, Spanning Tree, Hunt Groups, and VTP Snooping Overview The following information and procedures are provided in this chapter and pertain to layer 2 and layer 3 modul e configurations: ■ VLAN Introduction ■ Creating and Implem enting VLANs ■ Spa ...

  • Avaya Cajun P882 - page 132

    4-2 Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 4 Advantages with VLANs: ■ Segment traffic and usage pattern s in a manner similar to creating subnets and segments in traditional networks. ■ Reduce the cost of equipment moves, upgrades, and other changes. ■ Simplify network administration. ■ Cre ...

  • Avaya Cajun P882 - page 133

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 4-3 Using VLANs, Spanning Tre e, Hunt Groups, and VTP Snooping A switch that is strictly port ba sed needs additional information to separate traffic passing from one VL AN to another. Since each port is dedicated to a particular VLAN, there is no need to analyze the ...

  • Avaya Cajun P882 - page 134

    4-4 Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 4 Figure 4-2. VLANs with 802.1Q tagging IEEE 802.1Q VLAN Tagging The Avaya Multiservice switch is compliant with the IEEE 802.1Q standard for VLANs and de fine s a Tag Header. Two Tag formats are defined as an Ethernet Encoded (4 bytes) for 802.3 and Ether ...

  • Avaya Cajun P882 - page 135

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 4-5 Using VLANs, Spanning Tre e, Hunt Groups, and VTP Snooping ■ Tagged frames are classified to the VLAN identified by the VLAN tag in the tag header of the frame. *Note: The switch supports a feature called Automatic VLAN Creation for tagged frames. For more infor ...

  • Avaya Cajun P882 - page 136

    4-6 Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 4 3. Setting the VLAN Binding attribute in the Switch Port Configuration dialog box to Bind to Received . This causes the port to be bound to all VLANs (as identified by the VLAN tag in tagged frame s) received on this port. Consequently, ports are bound t ...

  • Avaya Cajun P882 - page 137

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 4-7 Using VLANs, Spanning Tre e, Hunt Groups, and VTP Snooping Egress Rules For a given port/VLAN combinat ion, egress rules determine whether frames transmitted from the port on the VLAN are tagged or untagged. This is accomplished by setting the Trunking Mode attrib ...

  • Avaya Cajun P882 - page 138

    4-8 Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 4 ■ Assigning one of the ports of a 48-port module to a VLAN for which there exists IP interface will force that interface to be in the UP state, even when there is no physical connection to the module. Creating a VLAN You can create a VLAN using either ...

  • Avaya Cajun P882 - page 139

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 4-9 Using VLANs, Spanning Tre e, Hunt Groups, and VTP Snooping 2. Click CREATE . The Create VLAN dialog box opens (Figure 4-4). Figure 4-4. Create VLAN Dialog Box . 3. Enter a name for the VLAN in the Name field. 4. In the ID field, enter an unused VLAN ID value (betw ...

  • Avaya Cajun P882 - page 140

    4-10 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 4 6. Click APPLY to create the new VLAN, or CANCEL to restore previous settings. CAUTION Before configuring Hash Tables and Auto Increment Hash Table parameters, Avaya strong ly recommends that you review the contents of Chapter 4, “ Using VLANs, Span ...

  • Avaya Cajun P882 - page 141

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 4-11 Using VLANs, Spanning Tre e, Hunt Groups, and VTP Snooping Configuring VLAN Parameters To configure all ports assigned to a VLAN: 1. Select Configuration from the L2 Switching > VLANs folder on the Web Agent windo w. The VLAN Configuration dialog box opens (Fi ...

  • Avaya Cajun P882 - page 142

    4-12 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 4 3. Refer to Table 4-2 to configure the VLAN Switch Ports dialog box parameters: 4. Click APPLY to save your changes, or CANCEL to restore previous settings. Table 4-2. VLAN Switch Port Dialog Box P arameters Parameter Defines... Port The switch port a ...

  • Avaya Cajun P882 - page 143

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 4-13 Using VLANs, Spanning Tre e, Hunt Groups, and VTP Snooping Assigning Ports to VLANs Refer to “ Configuring Switch Port Parameters ,” in Chapter 5 for instructions on assigning ports to VLANs. CAUTION Before changing the VLAN that a port is assigned to, you mu ...

  • Avaya Cajun P882 - page 144

    4-14 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 4 Need for Spanning tree Protocol For a bridging network to function properly, only one active path can exist between two stations. Multiple active paths between stations cause loops in the network. If a l oop exists in the bridged network topology, the ...

  • Avaya Cajun P882 - page 145

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 4-15 Using VLANs, Spanning Tre e, Hunt Groups, and VTP Snooping Spanning Tree, it is possible that in order to break the loop in VLAN A that a port that is bloc ked causes a lo ss of connectiv ity in VLAN B. Running per-VLAN Spanning Tree would correct the problem. * ...

  • Avaya Cajun P882 - page 146

    4-16 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 4 Figure 4-7. Spanning Tree Inform ation Dialog Box 2. Select the type of spanning tr ee you want to implement from the Configuration field pull-down menu. Refer to Table 4-3 for a definition of the Configuration field parameters: Table 4-3. Spanning Tr ...

  • Avaya Cajun P882 - page 147

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 4-17 Using VLANs, Spanning Tre e, Hunt Groups, and VTP Snooping Per VLAN (Default Switch Setting) Each VLAN runs a separate IEEE 802.1D- compliant spanning tree. In Per-VLAN spanning tr ee, the switch implements a separate spanning tree Domain f or each VLAN. Each log ...

  • Avaya Cajun P882 - page 148

    4-18 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 4 3. Click APPLY to save your changes, or CANCEL to restore previous settings. 4. Select a VLAN na me from the Bridge column (Figure 4-9)to set the bridge parameters. The Spanning Tree Bridge Configuration dialog box opens (Figure 4-10). Figure 4-8. Spa ...

  • Avaya Cajun P882 - page 149

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 4-19 Using VLANs, Spanning Tre e, Hunt Groups, and VTP Snooping * Note: The Avaya Multiservice swit ch enforces the following spanning tree parameter relationships, as defined by IEEE 802.1D. — 2X (Bridge_Forward-delay-1.0 seconds)>= Bridge_Max_Age — Bridge_Max ...

  • Avaya Cajun P882 - page 150

    4-20 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 4 Configuring Spanning Tree Protocol Ports You can configure the bridge ports for Spanning Tree using either the Web Agent or the CLI. Using the Web Agent To configure spanning tree bridge ports using the Web Agent: 1. Select Spanning Tree from the L2 S ...

  • Avaya Cajun P882 - page 151

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 4-21 Using VLANs, Spanning Tre e, Hunt Groups, and VTP Snooping Figure 4-10. Spanning Tree Bridge Port Information Wi ndow Table 4-5 explains the Spanning Tree Bridge Port Information window parameters. Table 4-5. Spanning Tree Bridge Port Information Wi ndow Paramete ...

  • Avaya Cajun P882 - page 152

    4-22 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 4 4. In the Bridge Port column, select the bridge port number The Spanning Tree Port Information window open s (Figure 4-13). State Current bridging state of the port. The options are: • Disabled - Th e po rt is di sa bl ed. • Blocking - The Spannin ...

  • Avaya Cajun P882 - page 153

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 4-23 Using VLANs, Spanning Tre e, Hunt Groups, and VTP Snooping Figure 4-11. Spanning Tree Port Configuration Wind ow 5. Enter the appropriate informatio n for the parameters. For an explanation of the para meters in the Span ning Tree Port Configuration dialog box, r ...

  • Avaya Cajun P882 - page 154

    4-24 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 4 Using the CLI To configure spanning tree bridge ports using the CLI, enter the following command from Configure mode: <config># set port spanning-tree-mode {<mod-num> | <mod-swport-range>}[...,{<mod-num> | <mod-swport- range ...

  • Avaya Cajun P882 - page 155

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 4-25 Using VLANs, Spanning Tre e, Hunt Groups, and VTP Snooping Figure 4-12. Module Information Window 2. Select the switch port number from the Switch Ports column. The Switch Ports window opens (Figure 4-13). ...

  • Avaya Cajun P882 - page 156

    4-26 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 4 Figure 4-13. Switch Ports Dialog Box 3. Select the port number on which you want to disable spanning tree from the Name column. The Switch Port Configuration window for that port opens (Figure 4-14). ...

  • Avaya Cajun P882 - page 157

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 4-27 Using VLANs, Spanning Tre e, Hunt Groups, and VTP Snooping Figure 4-14. Switch Port Configuration Window 4. From the Spanning Tree pull-down menu, for the Spanning Tree Mode parameter select Disable . 5. Click Apply to disable spanning tree mode on the port, or C ...

  • Avaya Cajun P882 - page 158

    4-28 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 4 Refer to the Command Reference Guide for the Avaya P55 0R, P580, P8 80, and P882 Multiservice Sw itches, Version 5.3.1 for details about this command. Using Hunt Groups to Aggregate Bandwidth between Switches Hunt Group Overview Hunt groups allow you ...

  • Avaya Cajun P882 - page 159

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 4-29 Using VLANs, Spanning Tre e, Hunt Groups, and VTP Snooping these next-level switches may in turn suppo rt tens (or even hundreds) of workgroup switches and users. Features Hunt group features include: ■ Shared traffic load. ■ Fault tolerance — If a port in ...

  • Avaya Cajun P882 - page 160

    4-30 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 4 of those 12 ports participates in a hu nt gro up, then that Forwardin g Engine is considered a participating forwarding engine. How Hunt Groups Load Share Forwarding Engines and Fabric Ports Each 80 series Media module has at least two Forwarding Engi ...

  • Avaya Cajun P882 - page 161

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 4-31 Using VLANs, Spanning Tre e, Hunt Groups, and VTP Snooping each have a Forwarding Eng ine and use the se cond fabric port. The Forwarding Engines are distributed on a o ne to one basis for the 80 series Gigabit media modules. For example the 8 port 1000 TX, the f ...

  • Avaya Cajun P882 - page 162

    4-32 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 4 port for FE#3, the second port for FE#5, the first port for FE#7, the second port for FE#8, the first for FE#9, and the second port for FE#10. The second destination MAC Address is round-robin assigned in the same fashion and so on. Figure 4-16. Slot ...

  • Avaya Cajun P882 - page 163

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 4-33 Using VLANs, Spanning Tre e, Hunt Groups, and VTP Snooping Note: All 80 series media modules are L3 capable Figure 4-17. Load Sharing Example 50 series 10 port 100Mbps F X(layer 2) 1 1 1 forwarding engine to 1 fabr ic port only 50 series 10 port 100Mbps FX (layer ...

  • Avaya Cajun P882 - page 164

    4-34 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 4 Optimizing Hunt Group Throughput To Optimize Hunt Grou p throughput follow these consi derations. ■ Forwarding Engines in the Hunt group ports should be separate from the ports involved in the modules traffic flows. ■ The greater the number of non ...

  • Avaya Cajun P882 - page 165

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 4-35 Using VLANs, Spanning Tre e, Hunt Groups, and VTP Snooping Creating Hunt Groups You can create hunt groups from either the Web Agent or the CLI. Using the Web Agent To create a hunt group using the Web Agent: 1. Select Hunt Groups from the L2 Switching group in t ...

  • Avaya Cajun P882 - page 166

    4-36 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 4 5. Click APPLY to save your changes, or CANCEL to restore previous settings. Adding Ports to the Hunt Group Once you have created and named a Hunt Group, you can add as many additional ports as needed to the Hunt Group. The next two Hunt Group configu ...

  • Avaya Cajun P882 - page 167

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 4-37 Using VLANs, Spanning Tre e, Hunt Groups, and VTP Snooping Figure 4-21. Physical Port Configuration Windo w 3. Uncheck the checkbox from the Enable column for a specific port. The check mark disappears to disable the port. * Note: Check the speed of the ports tha ...

  • Avaya Cajun P882 - page 168

    4-38 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 4 Figure 4-22. Switch Ports Windo w 3. Select the name of the port you want to configure from the Name column. The Switch Port Configuration window for that switch port opens (Figure 4-23). ...

  • Avaya Cajun P882 - page 169

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 4-39 Using VLANs, Spanning Tre e, Hunt Groups, and VTP Snooping Figure 4-23. Switch Port Configuration Window 4. Select the hunt group assignment from the Hunt Group pull-down menu. 5. Click APPLY to save your changes, or CANCEL to restore previous settings. 6. Repeat ...

  • Avaya Cajun P882 - page 170

    4-40 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 4 10. Select a checkbox fr om the Enable column for that port. The group can now function as a load-sharing con nection. 11. Click APPLY to save your cha nges, or CANCEL to restore previous settings. * Note: If thousands of addresses ha ve been learned ...

  • Avaya Cajun P882 - page 171

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 4-41 Using VLANs, Spanning Tre e, Hunt Groups, and VTP Snooping Figure 4-24. Hunt Group Members Dialog Box . Using the CLI To view details about hunt group mem bers using the CLI, enter the following command in configuration mode: <configure># show huntgroup < ...

  • Avaya Cajun P882 - page 172

    4-42 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 4 Removing Ports from Hunt Groups You can remove a port from a hunt group by using either the Web Agent or the CLI. Using the Web Agent To remove a port from a hunt group by using the Web Agent: 1. Open the Switch Port Configuration window for the port ...

  • Avaya Cajun P882 - page 173

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 4-43 Using VLANs, Spanning Tre e, Hunt Groups, and VTP Snooping name. VLAN changes made on an Avaya Multiservice switch are not automatically updated on any othe r switch. Please note that VTP learned VLANs may not be modif ied or deleted on an Avaya Multiservice swit ...

  • Avaya Cajun P882 - page 174

    4-44 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 4 2. Select the number in the Switch Ports column for the module you want to configure VTP. The Switch Ports window for that module opens (see Figure 4-26). Figure 4-26. Switch Ports Window 3. Select the port in the Name column on which you want to enab ...

  • Avaya Cajun P882 - page 175

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 4-45 Using VLANs, Spanning Tre e, Hunt Groups, and VTP Snooping Figure 4-27. Switch Port Configuration Window with VTP Options 4. Select either IEEE 802.1Q or Multi-laye r from the Trunk Mode pull-down menu to match the setting of the trunk mode for the switch port at ...

  • Avaya Cajun P882 - page 176

    4-46 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 4 Figure 4-28. VTP Snooping Configuration Windo w 8. Refer to Table 4-8 and configure the VTP Snooping parameters. Table 4-8. VTP Snooping Pa rameters Parame ter Definition VTP Snooping State Select Enable to enable VTP snooping globally for the switch. ...

  • Avaya Cajun P882 - page 177

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 4-47 Using VLANs, Spanning Tre e, Hunt Groups, and VTP Snooping 9. Click APPLY to save your changes, or CANCEL to restore previous settings. Using the CLI To configure VTP snooping using the CLI, enter the following command in Configure mode: <configure># set vt ...

  • Avaya Cajun P882 - page 178

    4-48 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapte r 4 ...

  • Avaya Cajun P882 - page 179

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 5-1 5 Configuring Port Parameters Overview The following information and procedures are provided in this chapter and are common to bo th layer 2 and layer 3 module configuration: ■ Two Categories of Port Parameters ■ Configuring Physic al Port Parameters ■ Conf ...

  • Avaya Cajun P882 - page 180

    5-2 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1 Chapte r 5 Physical Port Features This section describes the followin g features that are available when configuring the physical parameters on the ports: ■ Autonegotiation ■ Flow Control Auto- negotiation Autonegotiation is an extension of the link test method ...

  • Avaya Cajun P882 - page 181

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 5-3 Configuring Port Parameters The LCW contains two fields (the selector field and the te chnology ability field), which together serve to identify a device's capabilities. It may seem that because the FLP and the normal link pulse use the same interval at the ...

  • Avaya Cajun P882 - page 182

    5-4 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1 Chapte r 5 ■ Disable ■ Enable ■ Enable – Send Only ■ Enable – Respond Only The Disable option disables flow control (the default). The Enable option enables IEEE802.3X (XOFF/XON) Flow Cont rol on the line. The Avaya Multiservice Switch is the sender of ...

  • Avaya Cajun P882 - page 183

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 5-5 Configuring Port Parameters * Note: If a Gigabit module that does not support the autonegotiation is connected to a device that does, disable autonegotiation to ensure proper operation. If you enable flow control, the switch manages the inbound buffers with flow ...

  • Avaya Cajun P882 - page 184

    5-6 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1 Chapte r 5 ■ Setting the VLAN Binding a ttribute in the Switch Port Configuration dialog box to Bind to All . This causes the port to be bound to all VLANs known to the switch (now and in the future). This is not recommende d when the switches on both ends of the ...

  • Avaya Cajun P882 - page 185

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 5-7 Configuring Port Parameters Static 802.1Q Multi- layer Ingress: Untagged frames are cl assified to the VLAN associated with the port on which the frame is received. Tagge d frames are classi fied to the VLAN identified by the VLAN tag in the tag header of the fra ...

  • Avaya Cajun P882 - page 186

    5-8 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1 Chapte r 5 Assigning VLANs to a Port and Associated Issues There are two ways to assign VLANs to ports on the Avaya Multiservice Switch. You configure the Port(s) to the VLAN desired for the individual port(s), or entire module. Assigning the VLAN this way enables ...

  • Avaya Cajun P882 - page 187

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 5-9 Configuring Port Parameters VLAN and causes all untagged fra mes arriving on this port to be assigned to the specified VLAN. The port(s) will still assign incoming tagged packets to the VLAN indicated by the tag. In the current release of software, a non-trunk po ...

  • Avaya Cajun P882 - page 188

    5-10 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1 Chapte r 5 ■ PC2 is a member of VLAN2 and is co nnected to switch Port 2 ■ SERVER1 is a member of VLAN4 a nd is connected to switch Port 4 With the set vlan CLI command, assign p ort 1, and port 2 to VLAN4 and also assign port 4 to VLAN1 an d VLAN2. Then PC1 a ...

  • Avaya Cajun P882 - page 189

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 5-11 Configuring Port Parameters Configuring Physical Port Parameters on Gigabit Ports You can configure the physical port parameters on Gigabit ports using either the Web Agent or the CLI. Web Agent Procedure To configure ports on a gigabit module using the Web Agen ...

  • Avaya Cajun P882 - page 190

    5-12 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1 Chapte r 5 Figure 5-2. Physical Port Configuration Dialog Box for the Gigabit Ethernet Module 3. Click the checkbox in the Enable column to enable a port. A check mark displays. *Note: If the port is already enabled (check mark is visible), and you want to disable ...

  • Avaya Cajun P882 - page 191

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 5-13 Configuring Port Parameters Figure 5-3. Detailed Physical Port Configura tion Dialog Box for Port on Gigabit Ethernet Module 6. Enter a port name in the Name field, if desired, or use the default name supplied 7. Select one of the following from the Category fie ...

  • Avaya Cajun P882 - page 192

    5-14 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1 Chapte r 5 12. Select Enable from the Remote Fault detect field pull down menu to detect 13. Click APPLY to save your cha nges, or CANCEL to restore previous settings. Refer to Table 5-3 provides a mo re detailed description of the Detailed Physical Port dialog bo ...

  • Avaya Cajun P882 - page 193

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 5-15 Configuring Port Parameters CLI Command To configure ports on a gigabit module using the CLI, enter the following command from Configure mode: <configure># set port <options> Refer to the Command Reference Guide for the Avaya P550R, P580, P8 80, and ...

  • Avaya Cajun P882 - page 194

    5-16 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1 Chapte r 5 Configuring Physical Port Par ameters on Fast Ethernet Ports You can configure ports on a Fast Ethernet module using ei ther the Web Agent or CLI commands. Web Agent Procedure To configure ports on a Fast Ethe rnet module using the Web Agent: 1. Select ...

  • Avaya Cajun P882 - page 195

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 5-17 Configuring Port Parameters Figure 5-5. Detailed Physical Port Configura tion Dialog Box for Port on Fast Ethernet Module 7. Enter a port name in the Name field, if desired or use the default name. 8. Select one of the following from the Category field pul l- do ...

  • Avaya Cajun P882 - page 196

    5-18 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1 Chapte r 5 11. Select one of the following from the Flow Control Mode field pull-down menu: Enable – Sets flow contro l to prevent buffer overflows. Disable – Disables flow control when it is causing congestion in other areas of the network. Enable (with Aggre ...

  • Avaya Cajun P882 - page 197

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 5-19 Configuring Port Parameters Disable – If you do not want this port to limit the number of unknown unicast and multicast packets it tried to forward Enable (include Known Multicasts) – If you want to optionally include known multicast packets in this percenta ...

  • Avaya Cajun P882 - page 198

    5-20 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1 Chapte r 5 Table 5-4. Fast Ethernet (10/100) Port Parameters Parameter Definition Name Enter a user configurable name for this port (po ssibly a drop connection name or the name of the station or other device connected to the po rt). Category Select either User Po ...

  • Avaya Cajun P882 - page 199

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 5-21 Configuring Port Parameters Auto Negotiation Mode Select the port to auto-neg otiate a speed and duplex mode. Auto-nego ti ate works best when the connection on the other end of the link is set to auto- negotiate as well. If you se t a port to auto-negotiate, an ...

  • Avaya Cajun P882 - page 200

    5-22 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1 Chapte r 5 CLI Command To configure ports on a Fast Ethernet module using the CLI, enter the following command from Configure mode: <configure># set port <options> Refer to the Command Reference Guide for the Avaya P55 0R, P580, P8 80, and P882 Multise ...

  • Avaya Cajun P882 - page 201

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 5-23 Configuring Port Parameters 4. Refer to "Configuring Physical Port Parameters on Gigabit Ports" and "Configuring Physical Port Parameters on Fast Ethernet Ports" earlier in this chapter to configure the port parameters. 5. Click APPLY to save ...

  • Avaya Cajun P882 - page 202

    5-24 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1 Chapte r 5 2. Select the switch ports for a module from the Switch Ports column. The Switch Ports dialog box opens (Figure 5-7). Figure 5-7. Switch Ports Dialog B ox 3. Select a port name from the Name column. The Switch Port Configuration dialog box opens (Figure ...

  • Avaya Cajun P882 - page 203

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 5-25 Configuring Port Parameters Figure 5-8. Switch Port Con figuration Dialog Bo x 4. Select any VLAN from the Port VLAN field pull-down menu. This causes all untag ged frames arriving on this port to be assigned to the specified VLAN. The port will still assign inc ...

  • Avaya Cajun P882 - page 204

    5-26 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1 Chapte r 5 7. Select an option from the VLAN Binding field pull-down menu. The options are Static (default), Bind-to-All , and Bind-to-Receive . Refer to Table 5-7 for an explanation of these options. 8. Select Enable or Disable (default) from the VTP Snooping fie ...

  • Avaya Cajun P882 - page 205

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 5-27 Configuring Port Parameters 15. Adjust the trap timer, if desired. 16. Select Enable from the Known Mode field pull-down menu to suppress any packets that have un known unicast destination addresses and are flooded to this po rt. For example, if a known end -sta ...

  • Avaya Cajun P882 - page 206

    5-28 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1 Chapte r 5 Example Refer to Table 5-6 as an example of the recommended switch port settings for a Cisco Catalyst 5000 TM . Allow Learning Select Disable to keep the port fro m learning new MA C addresses and forwardin g them to the Supervis or module to be added t ...

  • Avaya Cajun P882 - page 207

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 5-29 Configuring Port Parameters CLI Command To configure switch ports using the CLI, enter the following command from Configur e mode: <configure># set port <options> Refer to the Command Reference Guide for the Avaya P550R, P580, P8 80, and P882 Multise ...

  • Avaya Cajun P882 - page 208

    5-30 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1 Chapte r 5 When a VLAN is created automa tically the VLAN name and VLAN ID are derived from the receiv ed tagged frame. The VLAN name w ill be created as “* autoVlan [VLAN ID]”. The VLAN ID will be identical to the VLAN ID of the received tagg ed frame. As wit ...

  • Avaya Cajun P882 - page 209

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 5-31 Configuring Port Parameters . * Automatically created by the switch software All others created manually Automatically Creating VLANs and Frame Tags Parameters VLANs are created automatically by the switch reading the VLAN tag of all ingress IEEE 802.1Q and Mult ...

  • Avaya Cajun P882 - page 210

    5-32 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1 Chapte r 5 Configuring Fast Start Mode Fast Start mode causes ports to begin forwarding traffic without waiting for the spanning tree negot iation to complete. You may want to set a port to Fast Star t mode in the following examples: ■ End-station ports that do ...

  • Avaya Cajun P882 - page 211

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 5-33 Configuring Port Parameters 3. Select the port name for the selected module in the Name column if you want to set Fast Start mode on individual ports. The Switch Port Configuration dialog box for that port opens (Figure 5-8). 4. Select All Module Switch Port Con ...

  • Avaya Cajun P882 - page 212

    5-34 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1 Chapte r 5 2. Select the Config uration Web page. 3. In the Module Informatio n pane, click the port link in the Switch Port column that you want to enable auto-flush for. 4. On the Switch Ports Web page, click either the port link in the Name column that you want ...

  • Avaya Cajun P882 - page 213

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 5-35 Configuring Port Parameters * Note: You must be in Global Configuration mode to enter the set port auto-flush commands. For more information about these com mands, see Chapter 21, “Port,” in the Command Reference Guide for the Avaya P550R, P 580, P880, and P ...

  • Avaya Cajun P882 - page 214

    5-36 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1 Chapte r 5 Figure 5-10. Switch Ports Config uration - All Ports d ialog box 4. Select the check box next to the field you want to configure. 5. Select an option for the specific field from that fields pull- down menu. 6. Select Restore to keep the previous setting ...

  • Avaya Cajun P882 - page 215

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 5-37 Configuring Port Parameters 3. Refer to Table 5-9 for more information about the Switch Port dialog box parameters: 4. Select one of the following items listed at the bottom of the screen for more information about the switch ports: — Next/Previous Module – ...

  • Avaya Cajun P882 - page 216

    5-38 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1 Chapte r 5 CLI Command To view switch port parameters using the CLI, enter the following command from Priv mode: > show port [{<mod-num>|<mod-swport-ra nge>} [...,{<mod-num>|<mod-swport-range>}]] Refer to the Command Reference Guide for ...

  • Avaya Cajun P882 - page 217

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 5-39 Configuring Port Parameters CLI Command To use the CLI to view the type of GBICs that are connected to the modules in your switch: 1. Enter either the User, Privile ged, or Global Configuration mode. * Note: For information on how to enter these modes, see “Ac ...

  • Avaya Cajun P882 - page 218

    5-40 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1 Chapte r 5 only by using the CLI and only for ports on 50-series and 80-series gigabit modules. For more information about this feature, see “ Network Error Detection and Recovery .” If NEDR shuts down a port, the switch will forward traffic through a redundan ...

  • Avaya Cajun P882 - page 219

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 5-41 Configuring Port Parameters configuration to the startup configuration while a port is shut down, you will have to manually reenable the port after you replace the module or reset the switch. Example Figure 5-11. Example of How NEDR Works In 5-11, the rising thr ...

  • Avaya Cajun P882 - page 220

    5-42 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1 Chapte r 5 2. Enter the following command: <configure># set port network-error-detection {<mod- port-range> | <all>} [action {notify | disable-port | off}] [rising-threshold <rising-threshold-value>] [falling- threshold <falling-threshol ...

  • Avaya Cajun P882 - page 221

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 5-43 Configuring Port Parameters * Note: If you set the rising threshold value and the falling threshold value close together, events may be logged more often if the Notify option is selected. The CLI displays a confirmation me ssage i f you successfully enable NEDR ...

  • Avaya Cajun P882 - page 222

    5-44 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1 Chapte r 5 Internal Error Detection and Recovery Overview Version 5.3.1 contains the Internal Error Detection and Recovery (IEDR) feature. This feature shuts down a port if its rate of internal errors exceeds the threshold setting . Currently you can enable this f ...

  • Avaya Cajun P882 - page 223

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 5-45 Configuring Port Parameters 1. Enter Global Configuration mode. The CLI displays the <configure># prompt. * Note: For information on how to enter this mode, see “Accessing/Exiting the Command Modes” in Chapter 1, “Overview,” of Command Reference Gu ...

  • Avaya Cajun P882 - page 224

    5-46 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1 Chapte r 5 Setting the IEDR Threshold for Internal Errors You can set the threshold at which the switch will shutdown a port. By default this threshold is set to 10 internal errors in a 5-second time period. You can set the threshold to any number between 5 and 50 ...

  • Avaya Cajun P882 - page 225

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 5-47 Configuring Port Parameters Error Messages * Note: If IEDR detects errors on a port in the huntgroup, it tests each port within that hunt group. When it finds the first bad port, it removes it from the Hunt Group and disables the port. The IEDR feature may displ ...

  • Avaya Cajun P882 - page 226

    5-48 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1 Chapte r 5 Internal-error-config enabled on p ort 7/1 Internal-error-config enabled on p ort 7/2 Internal-error-config enabled on p ort 7/3 Internal-error-config enabled on p ort 7/4 Feature enabled for port(s) specif ied If CRC Error Threshold is exceeded then po ...

  • Avaya Cajun P882 - page 227

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 5-49 Configuring Port Parameters ■ Upon Failure (The only fa ilure that can occur is that the number entered was not in the range 5 – 500): Threshold value must be between 5 and 500 ...

  • Avaya Cajun P882 - page 228

    5-50 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1 Chapte r 5 ...

  • Avaya Cajun P882 - page 229

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 6-1 6 Managing the Address Forwarding Table Overview The Address Forwarding Table (AFT ) is a mapping table of MAC addresses with their associated port locati ons.The AFT is used by the Avaya Multiservice switch to correctly forward (bridge) frames destined for a par ...

  • Avaya Cajun P882 - page 230

    6-2 Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, Version v5.3.1 Chapte r 6 through the Web Agent interface or CLI commands. A user can also make an entry or entries static, which saves the entries upon module reset. Chapter contents The following information and procedures are in this chapter. ■ Relationship between VLANs, A ...

  • Avaya Cajun P882 - page 231

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 6-3 Managing the Address Forwarding Tab le It is not advised to allow the to tal hash table memory us age to exceed 20K. More than 20K will limit the potential for growth (i.e., address learning). If your Avay a Mu ltiservice switch is approaching this threshold, adj ...

  • Avaya Cajun P882 - page 232

    6-4 Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, Version v5.3.1 Chapte r 6 tables within the switch, and will be referred to as the ‘index’. Because the algorithm maps 4096 VLAN numbers to 1024 indexes, it is easy to see that more th en one VLAN number may map to the same index. This is known as a ‘hash collision’. Whe ...

  • Avaya Cajun P882 - page 233

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 6-5 Managing the Address Forwarding Tab le If the number of VLANs supported in the switch is 500, then the VLAN ID numbers used in the switch should be chosen from the range of 1 to 500 rather then 1 to 10 00. Table 6-2 is an example of the size of the hash table cre ...

  • Avaya Cajun P882 - page 234

    6-6 Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, Version v5.3.1 Chapte r 6 This exceeds the 20K guideline for the amount of AFT memory used for Hash Tables. Even if the Hash Tabl e size is reduced by half, it still exceed the guideline. In order to comply with the guideline, the Initial Hash Table Size for each VLAN should be ...

  • Avaya Cajun P882 - page 235

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 6-7 Managing the Address Forwarding Tab le AFT Default Settings Figure 6-1. Create VLANs Hash Table Size Default Setti ngs (refer to figure 6-1) Name - Name for the new VLAN ID - VLAN ID number, valid number between 1-4094 (1 is reserved for the Default VLAN) Instanc ...

  • Avaya Cajun P882 - page 236

    6-8 Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, Version v5.3.1 Chapte r 6 parameters: Auto-Increment , Trigger (Multiplier), and Threshold (Util%) in the Address Forwa rding Table Configuration Figure 6-2. Address Forwarding Table Configuration Auto-Increment Auto-Increment is the Enable/Disable setting for the Auto-Sizing fe ...

  • Avaya Cajun P882 - page 237

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 6-9 Managing the Address Forwarding Tab le Resizing results in the switch util izing AFT memory more efficiently. When the switch resizes the Hash Table, all entries are flushed and must be relea rned. It is highly recommended the default of 40% no t be changed. The ...

  • Avaya Cajun P882 - page 238

    6-10 Avaya P550R, P580, P880, an d P882 Multis ervice Switch User Guide, Version v5.3.1 Chapte r 6 * Note: If you have ATM Uplink Modules in the chassis and you set the Age Timer value to less than 30 seconds, you must change the Flush MAC Timer on each ATM Uplink module to be less th an or equal to the new Age Timer value. Enter a new value in the ...

  • Avaya Cajun P882 - page 239

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 6-11 Managing the Address Forwarding Tab le Instance Table Click the ID number in the Instance IDs column, to achieve finer control of a particular VLAN table. The Address Table Instance screen displays for the instance ID selected.(Refer to Figure 6-3) Figure 6-3. A ...

  • Avaya Cajun P882 - page 240

    6-12 Avaya P550R, P580, P880, an d P882 Multis ervice Switch User Guide, Version v5.3.1 Chapte r 6 Refer to Table 6 -3 for a definition of the Address Ta ble Instance dialog box parameters. Table 6-3. Address Table Instance Pa rameters Parameter Definition VLAN Association Name of the VL AN this Hash table is associated with. Total Number of Entrie ...

  • Avaya Cajun P882 - page 241

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 6-13 Managing the Address Forwarding Tab le 3. Click: ■ APPLY to save your changes ■ CANCEL to restore previous settings ■ Delete All Learned Entries if you want to relearn the entire table ■ Delete Invalid L earned Entr ies if you want to delete all entries ...

  • Avaya Cajun P882 - page 242

    6-14 Avaya P550R, P580, P880, an d P882 Multis ervice Switch User Guide, Version v5.3.1 Chapte r 6 Controlling Re- configuration of AFT Sizes Using the Web Agent To manually control reconfigurat ion of AFT sizes using the Web Agent: 1. Select Configuration from the L2 Switching > Address Forwarding Table group in the Web Agent window. The Addres ...

  • Avaya Cajun P882 - page 243

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 6-15 Managing the Address Forwarding Tab le Figure 6-4. Address Entry Search Dialog Bo x. * Note: “DISPLAY ALL” ignores any parameter not checked in the left column. To view all addresses in the table, select “DISPLAY ALL” without selecting any filters. 2. To ...

  • Avaya Cajun P882 - page 244

    6-16 Avaya P550R, P580, P880, an d P882 Multis ervice Switch User Guide, Version v5.3.1 Chapte r 6 5. To search using a bridging status: — Select the Status check box in the Search By: colum n — Select a status from the pull-down menu to show only ports of a specific bridging status. The options are: Learned, Management, Self, and Multicast. 6. ...

  • Avaya Cajun P882 - page 245

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 6-17 Managing the Address Forwarding Tab le * Note: Some types of entries in the Address Forwarding Table can be modified. The port, priority, and persistence can be changed for l earned and managem ent entries. 7. To change an entry in the Address Forwarding Table, ...

  • Avaya Cajun P882 - page 246

    6-18 Avaya P550R, P580, P880, an d P882 Multis ervice Switch User Guide, Version v5.3.1 Chapte r 6 Persistence The persistence of the entry in the table can be set on all learned entries: • Permanent - The address is not aged out of the table. • Invalid - This entry is cleared from the table each time the switch resets. • Ageout - Address is ...

  • Avaya Cajun P882 - page 247

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 6-19 Managing the Address Forwarding Tab le Searching the Switch AFT Using the CLI To search the switch AFT using the CLI, enter the following command in Configure mode: <configure># show aft entry Refer to the Command Reference Guide for the Avaya P550R, P580, ...

  • Avaya Cajun P882 - page 248

    6-20 Avaya P550R, P580, P880, an d P882 Multis ervice Switch User Guide, Version v5.3.1 Chapte r 6 3. Select a VLAN for this entry from the VLAN field pull-down menu. 4. Select Forward or Filter from the Port Binding field pull-down menu.If filter is sele cted, frame s with the specific MAC address will be dropped. 5. Enter the port that you want a ...

  • Avaya Cajun P882 - page 249

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 6-21 Managing the Address Forwarding Tab le Option 82 for DHCP Option 82 for DHCP includes two suboptions: ■ Suboption 1 identifies the slot and physical port number from which the DHCP request was received. ■ Suboption 2 identifies the IP address and, if availab ...

  • Avaya Cajun P882 - page 250

    6-22 Avaya P550R, P580, P880, an d P882 Multis ervice Switch User Guide, Version v5.3.1 Chapte r 6 Modes” in Chapter 1, “ Overview ,” of the Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, Version 5.3.1 . Changing the Status of Option 82 by Using SNMP To change the status of option 82 by using SNMP, us ...

  • Avaya Cajun P882 - page 251

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 6-23 Managing the Address Forwarding Tab le To enable traps for unknown source addresses, you must first enable the MAC Address Lock feature. Yo u can enable this feature and traps for unknown source addresses by using the Web Agent, CLI, or SNMP. Web Agent Procedure ...

  • Avaya Cajun P882 - page 252

    6-24 Avaya P550R, P580, P880, an d P882 Multis ervice Switch User Guide, Version v5.3.1 Chapte r 6 3. Use the following command to disable learning on a port or port range: set port allow-learning <mod-swport-range> disable 4. Use the following command to enable known mode o n a port or port range: set port known-mode <mod-s wport-range> ...

  • Avaya Cajun P882 - page 253

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version v5.3.1 6-25 Managing the Address Forwarding Tab le 2. Use the MIB object that is listed in Table 6-7 to disable learning on a port. Table 6-7. MIB, MIB Obj ect, and OID for Disabling Learning MIB MIB Object OID ProminetMib.txt , version 5.2 promSwitchPortLearni ngMode 1.3.6 ...

  • Avaya Cajun P882 - page 254

    6-26 Avaya P550R, P580, P880, an d P882 Multis ervice Switch User Guide, Version v5.3.1 Chapte r 6 3. Use the MIB object that is listed in Table 6-8 to enable known mode on a port. 4. Use the MIB object that is listed in Table 6-9 to enable intrusion traps on a port . Table 6-8. MIB, MIB Object, a nd OID for Enabling Known Mode MIB MIB Object OID P ...

  • Avaya Cajun P882 - page 255

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 7-1 7 Configuring Redundancy Options Overview The Avaya Multiservice Sw itch can be configured with redundancy to provide fault tolerance. Supervisor Functions The Avaya Multiservice Sw itch supervisor module manages the resources of the switch, provides access to these resou ...

  • Avaya Cajun P882 - page 256

    7-2 Avaya P550R, P580, P880, and P882 Mu ltiservi ce Switch User Guide, v5.3.1 Chapte r 7 Virtual Router Redundancy Protocol (VRRP) The Avaya Multiservice Switch sup ports Virtual Router Redundancy Protocol (VRRP), an IETF protocol designed to support redundant LAN routers, as well as load balanc ing of traffic. VRRP is transparent to host end stat ...

  • Avaya Cajun P882 - page 257

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 7-3 Configuring Redu ndancy Options ■ Replacing an Element ■ Configuring Supervisor Module Redundant Ethernet Console IP Addresses ■ Synchronizing the Active and Standby CPUs Configuring Redundant Hardware The Avaya Multiservice switches provide a redundant ba ckplane t ...

  • Avaya Cajun P882 - page 258

    7-4 Avaya P550R, P580, P880, and P882 Mu ltiservi ce Switch User Guide, v5.3.1 Chapte r 7 Figure 7-2. Layout of the Redund ant Backplane for P880/P882 Chassis The Avaya Multiservice switches ar e equipped with diagnostics to: ■ Monitor the status of the Primary switch controller. ■ Monitor the status of a Active element. ■ Monitoring of Healt ...

  • Avaya Cajun P882 - page 259

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 7-5 Configuring Redu ndancy Options Installing and Enabling Redundant Hardware The standard switch configuration does not include a redund ant controller or element. The correct process is to: ■ Install the redundant hardware ■ Enable the redund ant hardware using either ...

  • Avaya Cajun P882 - page 260

    7-6 Avaya P550R, P580, P880, and P882 Mu ltiservi ce Switch User Guide, v5.3.1 Chapte r 7 Figure 7-3. Switch Fabri c Status Dialog Box 2. Select Yes from the Configure redundant Hardware field pull-down menu on the Switch Fab ric Status dialog box (Figure 7-3). 3. Click APPLY . The Switch Fabric Status should now show the redundant contro ller and ...

  • Avaya Cajun P882 - page 261

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 7-7 Configuring Redu ndancy Options Figure 7-4. Switch Fabri c Status Dialog Box Using the CLI To enable the redundant hardware by using the CLI, enter the following command from Enable/Configure mode: <configure># set fabric configure-redu ndant- hardware enable Refer ...

  • Avaya Cajun P882 - page 262

    7-8 Avaya P550R, P580, P880, and P882 Mu ltiservi ce Switch User Guide, v5.3.1 Chapte r 7 Figure 7-5. Switch Fabri c Status Dialog Box If a redundant controller is installed in the switch and enabled, the switch resets and the redundant co ntroller automatically takes over the operation of the fa iled Primary controller. To replace the failed Prima ...

  • Avaya Cajun P882 - page 263

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 7-9 Configuring Redu ndancy Options 7. Enable the redundant hardware (see "Enabling Redundant Hardware" earlier in this chapter). 8. Re-select Switch Fabric from th e System > Configuration group on the Web Agent window. The Switch Fabric Status dialog box re-d i ...

  • Avaya Cajun P882 - page 264

    7-10 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 7 3. Click APPLY to enable the redundant ele ment. The Switch Elements field displays: Normal # 0 This indicates that the red undant element is now e nabled. 4. Save the con figuration change s Using the CLI To enable an elem ent using the CLI, enter the follo ...

  • Avaya Cajun P882 - page 265

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 7-11 Configuring Redu ndancy Options Figure 7-6. CPU Redundancy Confi guration Dialog Box 2. Enter the internal IP addresses of the slot 1 and slot 2 CPUs in the Redundant CPU Console IP Address field. The addresses cannot be the same as the console IP or each other. The Gate ...

  • Avaya Cajun P882 - page 266

    7-12 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 7 Refer to the Command Reference Guide for the Avaya P55 0R, P580, P8 80, and P882 Multiservice Switches, v5.3.1 for more details about this command. * Note: When the redundant CPU co nsole IP address and default gateway are assi gned and addre sse s are re mo ...

  • Avaya Cajun P882 - page 267

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 7-13 Configuring Redu ndancy Options Synchronizing Process The Active supervisor performs TFTP “puts” to the Standby supervisor to synchronize the Active and standby images and configurations. This process takes place over an internal subnet and VLAN. From the Active supe ...

  • Avaya Cajun P882 - page 268

    7-14 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 7 Active and Standby Supervisor Mastership One Supervisor in Slot 1 - The slot 1 supervisor module is Active. If a supervisor module is inserted into slot 2, module 1 remains active, and initiates Health Reports to the standby supervisor in slot 2. One Supervi ...

  • Avaya Cajun P882 - page 269

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 7-15 Configuring Redu ndancy Options startup configuration file to the standby supervisor. The standby supervisor module mu st be reset to run the new configuration. The P580 and P882 Supervisor mo dules must be in the same Fabric mode to synchronize. 1. Copy the running conf ...

  • Avaya Cajun P882 - page 270

    7-16 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 7 3. Ensure that the health message s between the supervisor modules are being sent and received by monitoring the CPU Redundancy Statistics window. Select the Refresh button to ensure the counters increment. 4. Synchronize the Active and Standby supervisors ( ...

  • Avaya Cajun P882 - page 271

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 7-17 Configuring Redu ndancy Options * Note: If the 48-port mode is differen t on the Active and Standby Supervisor modules, the standby Supervi sor module will automatically reset. Using the CLI To synchronize the Active a nd redundant CPU’s using the CLI. ente r the follo ...

  • Avaya Cajun P882 - page 272

    7-18 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 7 ...

  • Avaya Cajun P882 - page 273

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 8-1 8 Configuring DNS Client Overview This chapter provides an overview of the Do main Naming System (DNS) Client support and pro cedur es for configuring DNS client support on the Avaya Multiservice switch. DNS Client Support Overview DNS is a distributed database of name se ...

  • Avaya Cajun P882 - page 274

    8-2 Avaya P550R, P580, P880, and P882 Mu ltiservi ce Switch User Guide, v5.3.1 Chapte r 8 authoritative answer to the query. In this model, the client is referred to as a Stub Resolver . Typically, Stub Resolvers are implemented on devices with limit ed resources such as embedde d systems or Personal Computers. The Avaya Multiservice switch is a St ...

  • Avaya Cajun P882 - page 275

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 8-3 Configuring DNS Client Root servers do not have specific tr anslations for names, but they do have the databa se of master name servers. The root server would the avaya.com master name server using the avaya.com IP address. The root server would then send a request to the ...

  • Avaya Cajun P882 - page 276

    8-4 Avaya P550R, P580, P880, and P882 Mu ltiservi ce Switch User Guide, v5.3.1 Chapte r 8 The following DNS Client features are supported: ■ The DNS Client on the Avaya Multiservice switch is Stub Resolver (i.e. it does not suppo rt Iteratio n). This means that referral answers will be discarde d. A Recursive DNS server must be used if you intend ...

  • Avaya Cajun P882 - page 277

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 8-5 Configuring DNS Client If the server cannot resolve the name, the Avaya Multiservice swi tch will use the same method with the second configured suffix. Once it has exhausted the configu red DNS suffixes, it will attempt the query with the second DNS server. This process ...

  • Avaya Cajun P882 - page 278

    8-6 Avaya P550R, P580, P880, and P882 Mu ltiservi ce Switch User Guide, v5.3.1 Chapte r 8 You can configure DNS client from the Web Agent or the CLI. Using the Web Agent To configure a DNS client by using the Web Ag ent: 1. Select DNS from System> Administration group on the Web Agent window. The DNS Config uration dialog box opens (Figure 8-1). ...

  • Avaya Cajun P882 - page 279

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 8-7 Configuring DNS Client Figure 8-1. DNS Configuration Dialog Box 2. Select Enable from the DNS Lookup field pull-down menu to enable DNS on the switch. *Note: When DNS is enabled and configured, you can enter DNS names in place of IP addresses for the following CLI command ...

  • Avaya Cajun P882 - page 280

    8-8 Avaya P550R, P580, P880, and P882 Mu ltiservi ce Switch User Guide, v5.3.1 Chapte r 8 copying files from TFTP servers, not the normal operation of the Avaya Multise rvice swi tch. •ping •telnet •connect •trace (traceroute) •copy tftp 3. Enter the DNS server IP address for each DNS server in the DNS Server IP Address fields (fields 1-6 ...

  • Avaya Cajun P882 - page 281

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 8-9 Configuring DNS Client Added name server '10.1 0.10.10' to the name ser ver list. Avaya(configure)# ip name-server 2 0.20.20.20 Added name server '20.2 0.20.20' to the name ser ver list. Avaya(configure)# ip name-server 3 0.30.30.30 Added name server & ...

  • Avaya Cajun P882 - page 282

    8-10 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 8 ...

  • Avaya Cajun P882 - page 283

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-1 9 Configuring IP Routing Overview The Avaya Multiservice Switch suppor ts the full suite of IP protocols for unicast and multicast packet rout ing and control. It is compatible with the installed base of IP routers and does not require changes to software in hosts or othe ...

  • Avaya Cajun P882 - page 284

    9-2 Avaya P550R, P580, P880, and P882 Mu ltiservi ce Switch User Guide, v5.3.1 Chapte r 9 For more detailed information on the switch routin g operations, see “ Routing with Layer 2 and Layer 3 Modules ” , in Chapter 1, “Introduction. ” Figure 9-1. Intra and Inter VLAN B ridging and Routing Hardware Requirements for IP Routing To configure ...

  • Avaya Cajun P882 - page 285

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-3 Configuring IP Routing Minimum IP Routing Configuration Requirements Your switch must be configured as follows to successfully create IP routing: ■ VLANs (subnets) have been create d to address current or future network configurations, or if you plan to expand yo ur cur ...

  • Avaya Cajun P882 - page 286

    9-4 Avaya P550R, P580, P880, and P882 Mu ltiservi ce Switch User Guide, v5.3.1 Chapte r 9 Displaying Existing IP Interfaces When you create an IP interface, you activate a location in the switch that communicates betwee n IP and the embedded software of the switch. You can create an IP interface using ei ther the Web Agent or the CLI. Display Exist ...

  • Avaya Cajun P882 - page 287

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-5 Configuring IP Routing *Note: If you modify the ARP Timeout value, the new value does not take affect when you click on AP PLY .You must, in addition to changing the ARP Timeout value, change the Admin State to Down, then change the ARP Timeout value, and then change the ...

  • Avaya Cajun P882 - page 288

    9-6 Avaya P550R, P580, P880, and P882 Mu ltiservi ce Switch User Guide, v5.3.1 Chapte r 9 2. Click CREATE . The Add IP Interface dialog box opens (Figure 9-3).To create a new IP interface and assign it to a VLAN. Figure 9-3. Add IP Interface Web Screen ...

  • Avaya Cajun P882 - page 289

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-7 Configuring IP Routing Table 9-1. Add IP Interface Web Page Fields Parameter Allows you to... Name Enter a unique, alphanumeric name for the interface (maximum 28 characters) VLAN A pull down menu that associates a VLAN wi th this IP Interface. Note: The way that you conf ...

  • Avaya Cajun P882 - page 290

    9-8 Avaya P550R, P580, P880, and P882 Mu ltiservi ce Switch User Guide, v5.3.1 Chapte r 9 Administrative State Specify the administrative state of the interfa ce. Options include: • UP - The interface is active. • DOWN - The interface is inactive. Network Address Enter the network IP a ddres s for the selected interface. Mask Enter the subnet m ...

  • Avaya Cajun P882 - page 291

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-9 Configuring IP Routing IP Routing Select enable or disable IP rout ing on the interfa ce. Options include: • Routing/ Mgmt (Default) - Enables you to manage the switch, from the Command Line Interface (CLI) or the Web Agent, an d configure IP routing for the switch. • ...

  • Avaya Cajun P882 - page 292

    9-10 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 Using the CLI Using the CLI to create an IP interface requires two CLI comman ds. 1. Enter Configure mode. 2. Create an Interf ace Name first. <configure># Interface <I nterface_name> type <ethe rnet or nbma> Example: Interface myif type et ...

  • Avaya Cajun P882 - page 293

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-11 Configuring IP Routing Figure 9-4. IP Global Configuration Dialog Box. ...

  • Avaya Cajun P882 - page 294

    9-12 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 Refer to Table 9-2 to configure the IP Global Configuration dialog box. Table 9-2. IP Global Configuration Param eters Parameter Allows you to... IP Unicast Forwarding Disable IP Unicast Forwarding. Must be enabled for Unicast Forwarding. The default setting ...

  • Avaya Cajun P882 - page 295

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-13 Configuring IP Routing 2. Click APPLY to save your changes, or CANCEL to restore previous settings. IP Multinetting You can set up a configuration of multiple subnets, and IP interfaces on a single VLAN. This is also referred to as IP Multinetting . A network is said to ...

  • Avaya Cajun P882 - page 296

    9-14 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 together in VLAN-A allowing co mputing resources on network 192.168.10.x to communicate with computing resources on network 192.168.60.x wi thout having to go through a router. To create a multinetted network, you must assign multiple subnets to a VLAN. * No ...

  • Avaya Cajun P882 - page 297

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-15 Configuring IP Routing 7. Repeat steps 2 through 6 for any other interfaces that you want to associate with the same VLAN. *Note: You must have a different network address for each new multinetting in terface that you create for the same VLAN. *Note: The first IP interfa ...

  • Avaya Cajun P882 - page 298

    9-16 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 Access Control List Overview An Access Control List (ACL) is a group of Access Control Rules. Access Control Rules are used to describe how to forward (route) packets, as opposed to where to forward them. The how can be to forward the packet with a specifi c ...

  • Avaya Cajun P882 - page 299

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-17 Configuring IP Routing Naming Conventions for ACLs The Avaya Multiservice switch supports ACL names up to 32 characters (Alpha-Numeric). Space s are allowed in the names but are not recommended. Instead of spaces, use the underscore “_” character. ACL Names are enter ...

  • Avaya Cajun P882 - page 300

    9-18 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 How Packets are Processed Assuming an ACL is active, when a packet arrives on the Avaya Multiservice switch, the parameters in the packet are compared to the parameters in the Access Rule startin g with the lowest index number. If there is a match, that ru l ...

  • Avaya Cajun P882 - page 301

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-19 Configuring IP Routing For example: Suppose the Avaya Mult iservice switch has interfaces to “Outside” networks as well as interfaces to “Inside” networks. The Outside networks need access to a web server and sh ould be den ied access to any other resource within ...

  • Avaya Cajun P882 - page 302

    9-20 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 Rules 1 and 2 collectively manage web traffic to and from the web server (WS). Rule 1 says that any source address can get to the web server’s IP address using destin ation port 80. Because the TCP Established criteria is unchecked, hosts from an y network ...

  • Avaya Cajun P882 - page 303

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-21 Configuring IP Routing The switch supports a maximum total of 512 access control rules, regardless of the number of access lists. For example, you could create the following three ACLs: • ACL A with 100 rules • ACL B with 200 rules • ACL C with 212 rules The combin ...

  • Avaya Cajun P882 - page 304

    9-22 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 Figure 9-7. Create IP Standard Access Li st Dialog Box 3. Refer to Table 9-3 to configure the Create Standard IP Access List dialog box to filter or prioritize traffic: Table 9-3. Create Standard IP Access List Dialog Bo x Parameters Parameter Allows you to. ...

  • Avaya Cajun P882 - page 305

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-23 Configuring IP Routing 4. Click CREATE to save your changes, or CANCEL to restore previous settings. Creating Extended Access Rules To create Extended Access Rules: 1. Select Access Lists from the Routing > IP >Configuration group on the Web Agent win dow. The IP A ...

  • Avaya Cajun P882 - page 306

    9-24 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 Figure 9-8. IP Extended Access Rule Creation Di alog Box ...

  • Avaya Cajun P882 - page 307

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-25 Configuring IP Routing 3. Refer to Table 9-4 to configure the IP Extended Access Rule Creation dialog box parameters to filter or prioritize traffic: Table 9-4. IP Extended Access Rule Creati on Parameters Parameter Allows you to... Access List Name Enter the alphanumeri ...

  • Avaya Cajun P882 - page 308

    9-26 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 4. Click CREATE to save your changes, or CANCEL to restore previous settings. TCP/UDP Source Port Specify a range of so urce ports that pass between two hosts or switches using the Transmission Control Protocol (TCP) or the User Datagram Protocol (U DP). Opt ...

  • Avaya Cajun P882 - page 309

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-27 Configuring IP Routing Activating Access Lists You can activate access lists on the switch through the Web Agent and the CLI. Activating Access Lists Using the Web Agent To activate an access list using the Web Agent: * Note: Before you can activate an access list, you m ...

  • Avaya Cajun P882 - page 310

    9-28 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 Refer to the Command Reference Guide for the Avaya P55 0R, P580, P8 80, and P882 Multiservice Switches, Version 5.3.1 for details about this command. Example: Filtering Web Traffic Using an Access Rule To configure your switch to filter web traffic to a part ...

  • Avaya Cajun P882 - page 311

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-29 Configuring IP Routing 10. Leave the TCP/UDP Source Port field alone: — a Min. of 0 (HTTP). — a Max. of 65536 (HTTP). 11. Select TCP Established . A check ma rk displays in the ch eck box. 12. Click CREATE to save your changes, or C ANCEL to restore previous settings ...

  • Avaya Cajun P882 - page 312

    9-30 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 8. Click CREATE to save your changes, or CANCEL to restore previous settings. Once you create both access rules, all traffic between subnet 10.1.1.0 and 10.1.2.0 is deny/filtered. *Note: Traffic between any other 10.1.x.0 subnets are not filtered because the ...

  • Avaya Cajun P882 - page 313

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-31 Configuring IP Routing the Ports are only valid if TCP or UDP is the se lecte d protocol and can be expressed as a single port or range of ports. The protocol ID for TCP and UDP is 6 and 17 respectively. ■ Access List/Access Control List (ACL): an ordered list of ACL R ...

  • Avaya Cajun P882 - page 314

    9-32 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 ■ FORE (Fast Out-of-Band Routing Engine): When an 80-series Ethernet media module is not licensed for routing , the media modules forward all routed packets to the supervisor. The F- Chip on the supervisor module pr ovides fast, direct forwarding of L3 pac ...

  • Avaya Cajun P882 - page 315

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-33 Configuring IP Routing ■ Manage F-Chip memory ■ Manage Cache Timers Recognize Performance Issues When the ACL is the root of a performance problem, it shows as the Slow Path becoming overused. The Slow Path is not designed to handle significant traffic levels si nce ...

  • Avaya Cajun P882 - page 316

    9-34 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 Slow Path versus Fast Path The goal is to maximize Fast Path traffic (L3 Frame Cache Hits) and minimize Slow Path traffic (L3 Slow Path Frames). The easiest parameters to monitor are found on the Forwarding Statistics web page found on the switch Web Agent b ...

  • Avaya Cajun P882 - page 317

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-35 Configuring IP Routing Layer 3 forwarding entries live for a time that is the maximum of two timers: ■ The Age Interval for entries in the layer 3 forwarding cache (The default setting is 120 seconds. Y ou can set this timer to a value from 120 to 360 seconds.) The Age ...

  • Avaya Cajun P882 - page 318

    9-36 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 The FE Cache page displays as shown below. Enable Routing at the Module The P580/P882 has the option of centralized (unlicensed) or distributed (licensed) routing function. When a module is licensed, the on-board F-Chips (FIRE) provide the Fastpath processin ...

  • Avaya Cajun P882 - page 319

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-37 Configuring IP Routing Design Safe, Efficient ACLs The entry of ACL rules vi a the CLI, web or Avaya Policy Manager does not encourage or enforce any checking beyond correct syntax. The general guideline is that you are configuring a Layer-3 switch, not a firewall! The f ...

  • Avaya Cajun P882 - page 320

    9-38 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 ■ Slots 2-7 (P580) and Slots 2-17 (P882) have 2 Fabric ports per slot ■ The Supervisor has 1 F-chip (FORE) ■ The 8-port GigE has 8 F-Chips (4 per Fabric port) ■ The 4-port GigE has 4 F-Chips (2 per Fabric port) ■ The 24-port Ethernet modules (coppe ...

  • Avaya Cajun P882 - page 321

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-39 Configuring IP Routing Configuring Hash Mode If your diag nosis shows a perfor mance degradation with an ACL enabled, the IP Unicas t Hash mode needs to be changed from “DA-only” to “SA-DA”. To do this from the switch Web Agent, select: Routing>L3 Forwarding C ...

  • Avaya Cajun P882 - page 322

    9-40 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 Managing F-chip Memory The reconfiguration of Hash Mode can cause a second ary effect: increased cache usage. By default, the IP Unicast Cache size is 15000 entries per F-chip. Although this ca n be used up simply due to a high number of Flows (e.g., a proxy ...

  • Avaya Cajun P882 - page 323

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-41 Configuring IP Routing As long as these totals stay under 70K, it is safe to increase the IP Unicast Maximum Entries to prevent overflow. If the switch is not routing IPX or has minimal IP Mu lticas t traffic, it i s generally safe to double the IP Unicast maximum to 300 ...

  • Avaya Cajun P882 - page 324

    9-42 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 Figure 9-10. Add IP Static Route dialog box 2. Refer to Table 9-5 to configure the IP Static Route dialog box parameters: 3. Click CREATE to save your changes, or CANCEL to restore previous settings. Using the CLI To create and show IP static routes using th ...

  • Avaya Cajun P882 - page 325

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-43 Configuring IP Routing Creating IP Static ARP Entries You can create static ARP e ntries on the switch using the Web Agent or the CLI. Creating IP Static ARP Entries Using the Web Agent To create a static ARP entry in your switch’s ARP cache using the Web Agent: 1. Sel ...

  • Avaya Cajun P882 - page 326

    9-44 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 3. Refer to Table 9-6 to configure the Add IP Static ARP Entry dialog box parameters: 4. Click CREATE to save your changes, or CANCEL to restore previous settings. Creating IP Static ARP Entries Using the CLI To create IP static ARP entries us ing the CLI, e ...

  • Avaya Cajun P882 - page 327

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-45 Configuring IP Routing Figure 9-13. IP BOOTP/DHCP Server Dialog Box 2. Select CREATE . The Add BOOTP/DHCP Server Entry dialog box opens (Figure 9-1 4). Figure 9-14. Add BOOTP/DHCP Server Entry Dialog Box 3. Enter the BOOTP/DHCP server IP address in the IP Address field. ...

  • Avaya Cajun P882 - page 328

    9-46 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 Option 82 for DHCP Option 82 for DHCP includes two opti ons: ■ Circuit Info , identifies the slot a nd physical po rt number from which the DHCP request was received. ■ Agent Info , identifies the IP addre ss and, if available, the system name of the swi ...

  • Avaya Cajun P882 - page 329

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-47 Configuring IP Routing Figure 9-15. IP Global Config uration Dialog Box 2. Open the pull-down menus from the DHCP Option - Circuit Info and DHCP Option 82 - Agent Info fields. 3. Select Enable . ...

  • Avaya Cajun P882 - page 330

    9-48 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 * Note: BOOTP/DHCP relay Agent must be set to enable, and must be enabled on the desired IP interface (enabled by default). Enabling Option 82 by Using the CLI To use the CLI to enable Option 82, enter Global Configuration mode and use the following commands ...

  • Avaya Cajun P882 - page 331

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-49 Configuring IP Routing * Note: Interfaces configured for IGMP forwarding will not be able to participate in multicast sessions distributed through DVMRP Routing. ■ Multicast Routing - allows a switch to deliver multicast traffic between neighboring routers and across t ...

  • Avaya Cajun P882 - page 332

    9-50 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 Figure 9-16. IP Global Config uration Dialog Box 2. Select Enable from the IP Multicast Forwarding field pull- down menu to enable IP multicast globally. ...

  • Avaya Cajun P882 - page 333

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-51 Configuring IP Routing 3. Select Global Configuration from the Routing > IGMP group on the Web Agent window. The IGMP Global Configuration dialog box opens (Figure 9-17). Figure 9-17. IGMP Global Configuration Dialog Box 4. Select Enable from the IGMP field pull-down ...

  • Avaya Cajun P882 - page 334

    9-52 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 Figure 9-18. IGMP Interfaces Dialog Box 2. Refer to Table 9-7 to modify an IGMP interface: Table 9-7. IGMP Interface Para meters Parameter Allows you to... Select Select the interface to be modified. Interface Displays the IP interface that is configure d wi ...

  • Avaya Cajun P882 - page 335

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-53 Configuring IP Routing 3. Click APPLY to save your changes, or CANCEL to restore previous settings. Modifying IGMP Interfaces Using the CLI To modify an IGMP interface usin g the CLI, enter the following command from interface mod e: (config-if:<interface>)# ip igm ...

  • Avaya Cajun P882 - page 336

    9-54 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 You can configure DVMRP Globally using either the Web Agent or the CLI. * Note: When processing he avy traffic, th e switch may lose a small number of DVMRP neig hbor-to-neighbor probe messages. The loss of th ese messages m ay cause multicast routing to bec ...

  • Avaya Cajun P882 - page 337

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-55 Configuring IP Routing Figure 9-19. DVMRP Global Configura tion Dialog Box 4. Select Enable from the DVMRP Version 3/0xFF field pull-down menu. 5. Refer to Table 9-8 to configure the DVMRP Global Configuration dialog box parameters: Table 9-8. DVMRP Global Configuration ...

  • Avaya Cajun P882 - page 338

    9-56 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 6. Click APPLY to save your changes, or CANCEL to restore previous settings. Configuring the DVMRP Global Configuration Using the CLI To configure DVMRP glob ally using the CLI: <configure># router dvmrp Refer to the Command Reference Guide for the Ava ...

  • Avaya Cajun P882 - page 339

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-57 Configuring IP Routing Modifying a DVMRP Interface You can modify a DVMRP interface using either the We b Agent or the CLI. Modifying the DVMRP Interface Using the Web Agent To modify a DMVRP interface using the Web Agent: 1. Select Interfaces from the Routing > DVMRP ...

  • Avaya Cajun P882 - page 340

    9-58 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 3. Click APPLY to save your changes, or CANCEL to restore previous settings. Modifying the DVMRP Interface Using the CLI To configure the DVMRP Interface using the CLI: (configure-if:<interface># ip dvmrp <options> Refer to the Command Reference ...

  • Avaya Cajun P882 - page 341

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-59 Configuring IP Routing Monitoring Switch Performance Using IP Statistics This section provides detailed information on the analysis and use of IP and IP multicast statistics. IP routing statistic options include: ■ Displaying Global IP Routing Stat istics using the Web ...

  • Avaya Cajun P882 - page 342

    9-60 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 Figure 9-21. IP Routing Global Statistics Dialog Box 2. C lick a. Clear to set all statistics to zero. b. Refresh to update all statistics. 3. Refer to Table 9-10 to review th e definition of each statistic: Table 9-10. IP Routing Global Statistics Statistic ...

  • Avaya Cajun P882 - page 343

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-61 Configuring IP Routing IP In Address Errors Number of input datagrams discarded because the IP addr ess in their I P header's destinati on field was not a valid address to b e received at this enti ty. This count includes invalid addresses (for example, 0.0.0.0 ) an ...

  • Avaya Cajun P882 - page 344

    9-62 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 IP Out Discards Number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but were discarded (for example, for lack of buffer space). Note that this counter includes d atagrams counted in ipForwDa ...

  • Avaya Cajun P882 - page 345

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-63 Configuring IP Routing ICMP In Messages Total number of ICMP messages that the entity received. Not e that th is counter i ncludes a ll those counted by icmpInErrors. ICMP In Errors Number of IC MP messages that the entity received but determined as having ICMP- specific ...

  • Avaya Cajun P882 - page 346

    9-64 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 ICMP Out Time Exceeds Numbe r of ICMP Time Exceeded messages sent. ICMP Out Parameter Problems Number of IC MP Para meter Problem messages sent. ICMP Out Source Quenchs Number of ICMP Source Quench messages sent. ICMP Out Redirects Number of ICMP Redirect me ...

  • Avaya Cajun P882 - page 347

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-65 Configuring IP Routing Displaying Global IP Routing Statistics Using the CLI To display the global IP routing statistics using the CLI, enter the following command from the enable mode or configuration mode prompt: ># show ip traffic Searching the IP Routing Table To ...

  • Avaya Cajun P882 - page 348

    9-66 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 Figure 9-22. IP Route Table Search Dialog Box 2. Select the search criteria you want to use to find more specific information on available routes. For example, if you want to find all static routes that are presently conf igured on your switch, search by sou ...

  • Avaya Cajun P882 - page 349

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-67 Configuring IP Routing Figure 9-23. IP Route Table Dialog Box * Note: To delete a local entry from your IP routing table, you must delete the local IP interface associated with that entry. Displaying the IP Routing Table Statistics To display the IP Routing Table Statist ...

  • Avaya Cajun P882 - page 350

    9-68 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 Refer to the Command Reference Guide for the Avaya P55 0R, P580, P8 80, and P882 Multiservice Switches, Version 5.3.1 for details about this command. Refer to Table 9-12 for a definition of the I P Routing Table Statistics dialog box parameters: Searching th ...

  • Avaya Cajun P882 - page 351

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-69 Configuring IP Routing 2. Select the search criteria you want to use to find more specific information on your switch’s current ARP cach e. For example, if you want to find all of the IP ARP cache entries associated with your out-of-band connection on your switch, sear ...

  • Avaya Cajun P882 - page 352

    9-70 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 ■ Displaying the DVMRP Designa ted Forwarder(s) Table ■ Displaying the DVMRP Downstream Dependent Routers ■ Displaying the DVMRP Multicast Forwardi ng Cache * Note: It is possible to use access rules to filter and prioritize multicast traffic. Displayi ...

  • Avaya Cajun P882 - page 353

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-71 Configuring IP Routing 3. Refer to Table 9-14 for an explanation of the IGMP Global Statistics dialog box parameters: Displaying IGMP Interface Statistics You can examine IGMP interface statistics for each configured I P interface with multicast protocol enabled through ...

  • Avaya Cajun P882 - page 354

    9-72 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 — Click CLEAR ALL to reset all statistics to zero. — C lick REFRESH to view the latest interface statistics. 3. Refer to Table 9-15 fro an explanation of the IGMP Interface Statistics dialog box parameters: Table 9-15. IGMP Interface Statistics Dialog Bo ...

  • Avaya Cajun P882 - page 355

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-73 Configuring IP Routing Displaying IGMP Interface Statistics Using the CLI To display the IGMP Interface Statistics window using the CLI, enter the following command from configuration mode: (configure)# show ip igmp statistics Refer to the Command Reference Guide for the ...

  • Avaya Cajun P882 - page 356

    9-74 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 Displaying the IGMP Group Membership Table The multicast group table provides information on interfaces that are members of an IGMP group and contains an expiry time for the entry, IP address of the group, and th e group reporter address. To display the mult ...

  • Avaya Cajun P882 - page 357

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-75 Configuring IP Routing Display the Multicast group table from the CLI To display the multicast group table using the CLI, enter the following command from configuration mode: (configure)# show ip igmp groups Displaying the IGMP Local Multicast Forwarding Cache To display ...

  • Avaya Cajun P882 - page 358

    9-76 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 — Click Flush Tabl e to clear the entire table. — Click REFR ESH to receive the most up-to-date information on the entries in the table. 3. Refer to Table 9-17 to review the IGMP Multicast Forwarding Cache information: Displaying DVMRP Global Statistics ...

  • Avaya Cajun P882 - page 359

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-77 Configuring IP Routing Figure 9-30. DVMRP Global Statistics Dialog Box 2. C lick: — CLEAR to reset all statistics to zero — REFRESH to view the latest statistics. 3. Refer to Table 9-18 for an explanation of the DVMRP Global Statistics dialog box parameters: Table 9- ...

  • Avaya Cajun P882 - page 360

    9-78 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 Displaying DVMRP Interface Statistics DVMRP interface statistics list active DVMRP interfaces and provide specific information on each interface. To display DVMRP interface statistics using the Web Agent: 1. Select Interface Statistics from the Routing > ...

  • Avaya Cajun P882 - page 361

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-79 Configuring IP Routing — Click CLEAR All to reset all statistics to zero. — Click CLEAR to reset the selected interface. 3. Refer to Table 9-19 for an explanation of the DVMRP Interface Statistics dialog box parameters: Table 9-19. DVMRP Interface Statistics Paramete ...

  • Avaya Cajun P882 - page 362

    9-80 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 Displaying DVMRP Interface Statistics using the CLI To display the DVMRP interface statistics using the CLI, enter the following command from configuration mode: (configure)# show ip dvmrp interface Displaying DVMRP Neighbor Routers To view the DVMRP neighbo ...

  • Avaya Cajun P882 - page 363

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-81 Configuring IP Routing 3. Refer to Table 9-20 to view more informat ion on DVMRP neighbor routers. Displaying DVMRP Neighbor routers using the CLI To display the DVMRP neighbor ro uters using the CLI, enter the following command from configuration mode: (configure)# show ...

  • Avaya Cajun P882 - page 364

    9-82 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 Figure 9-33. DVMRP Route Table Statistics Dialog Box 2. Refer to Table 9-21 for an explanation of the DVMRP Route Table Statistics dialog box parameters: Displaying the DVMRP Route Table The DVMRP route table contains information on valid DVMRP routes, the e ...

  • Avaya Cajun P882 - page 365

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-83 Configuring IP Routing — To receive the most up-to-date information on the entries in the table, Click REFRESH . 3. Refer to Table 9-22for an explanation of the DVMRP Route Table parameters: Table 9-22. DVMRP Route Table Parameters Parameter Defines the... Source Netwo ...

  • Avaya Cajun P882 - page 366

    9-84 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 Displaying the DVMRP Routing Table, using the CLI To display the DVMRP route table using the CLI, enter the following command from configuration mo de: (configure)# show ip dvmrp routesDisplaying the DVMRP Upstream Routers Displaying the Upstream DVMRP Route ...

  • Avaya Cajun P882 - page 367

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-85 Configuring IP Routing Figure 9-35. Designated Forwarder(s) Table Dialog Box 3. Refer to Table 9-24 for an explanation of the DVMRP Designated Forwarder(s) dialog box parameters: Displaying the DVMRP Downstream Dependent Routers To view the DVMRP downstream dependent ro ...

  • Avaya Cajun P882 - page 368

    9-86 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 3. Refer to Table 9-25 for an explanation of the DVMRP Downstream Dependent Router(s) dialog box parameters.s Displaying the DVMRP Multicast Forwarding Cache The DVMRP Multicast Forwarding Cache screen provides detailed information on the multicast fo rwardi ...

  • Avaya Cajun P882 - page 369

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-87 Configuring IP Routing Figure 9-36. Multicast Forwarding Cache Di alog Box 2. To modify the Multicast Forwarding Table: — Select the entry and click Delete Entry to delete one or more entries. — Click Flush Tabl e to clear the entire table. — Click REFR ESH to rece ...

  • Avaya Cajun P882 - page 370

    9-88 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 4. Select the number in the Upstream Interface is Pruned field. The Upstream Prune Information dialog box opens. 5. Refer to Table 9-27 for an expl anation of the Upstream Prune Information dialog box parameters.s Upstream Interface is Pruned Router that is ...

  • Avaya Cajun P882 - page 371

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-89 Configuring IP Routing 6. Select the number in the Downstream Interface(s) field. The DVMRP Downstream Link(s) dialog box opens. 7. Refer to Table 9-28 for an explanation of the DVMRP Downstream Li nks dialog box parameters. 8. Select the number in the Upstream Source(s) ...

  • Avaya Cajun P882 - page 372

    9-90 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 9. Refer to Table 9-29 for an explanation of the DVMRP Upstream Source(s) dialog box parameters.. Configuring VRRP Virtual Router Redundancy Protocol (VRRP) is used to provide fast- fail over for hosts if the default gateway fails. This eliminates the single ...

  • Avaya Cajun P882 - page 373

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-91 Configuring IP Routing Web Agent Procedure To globally enable VRRP using the Web Agent: 1. Select Global Configuration from the Routing > IP > Configuration group on the Web Agent window. The IP Global Configuration dialog box opens (Figure 9-37). Figure 9-37. IP G ...

  • Avaya Cajun P882 - page 374

    9-92 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 Enabling VRRP on an Interface VRRP can be enabled on an interface using the Web Agent or the CLI. * Note: For VRRP to function correctly, it must be enabled globally and enabled on the interfaces on which any virtual routers are to be created. Otherwise , an ...

  • Avaya Cajun P882 - page 375

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-93 Configuring IP Routing CLI Command To enable an VRRP on an interf ace using the CLI, enter the following command in Co nfigure/Interface mode: <config-if:<if name>># ip vrrp Refer to the Command Reference Guide for the Avaya P550R, P580, P8 80, and P882 Multi ...

  • Avaya Cajun P882 - page 376

    9-94 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 Figure 9-40. Add VRRP Virtual Router Dialog B ox 3. Table 9-30 lists the parameters and describes the type of information that should be entered in the Add VRRP Virtual Router dialog box fields to create a VRRP virtual router. Table 9-30. Add VRRP Virtual Ro ...

  • Avaya Cajun P882 - page 377

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-95 Configuring IP Routing VR ID This is the virtual rout er identification number. The range is 1 - 255. The same VR ID can be used for multiple virt ual routers as long as the associated IP Interf aces are on different VLAN's (each VR ID number can be used o nce per V ...

  • Avaya Cajun P882 - page 378

    9-96 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 4. Click CREATE t o s a v e y o u r c h a n g e s , o r CANCEL to restore previous settings. Authorization Key Enter the Authentication Key in thi s field. If the Authenti cation Type was set to None, then a passwo rd wi ll not be used in the VRRP election p ...

  • Avaya Cajun P882 - page 379

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-97 Configuring IP Routing Using the CLI To create a VRRP router from the CLI, enter the following command in Configure mode: <config-if:<interface name>># ip vrrp <vr-id>(1- 255) address (ip-address) Refer to the Command Reference Guide for the Avaya P550R ...

  • Avaya Cajun P882 - page 380

    9-98 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 3. Refer to Table 9-31 for an explanation of the VRRP Virtual Router Statistics dialog box parameters: Table 9-31. VRRP Virtual Router Statistcs Dialog Box Parame ters Parame ter Definition... Interface Displays the IP Interfac e name that the virtual router ...

  • Avaya Cajun P882 - page 381

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 9-99 Configuring IP Routing Using the CLI To view VRRP virtual router statistics using the CLI , enter the following command in User mode: > show ip vrrp [cr|<if-name>|<detail>] Refer to the Command Reference Guide for the Avaya P550R, P580, P8 80, and P882 Mul ...

  • Avaya Cajun P882 - page 382

    9-100 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 ■ Preempt mode cannot be disabled. A virtual router that is IP Address Owner will always preempt and assume Mastership from a Backup router. ■ A virtual router that is IP A ddress Owner will “overwrite” the MAC Address of the associated IP Address. ...

  • Avaya Cajun P882 - page 383

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 9-101 Configuring IP Routing associated IP Address. In other words, equal priorities are not enough for a backup router tha t is already in the Primary state to become Backup. Selecting an Advertisement Interval In most cases, leaving the Advertis ement Interval to its defaul ...

  • Avaya Cajun P882 - page 384

    9-102 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 Configuring IRDP ICMP Router Discovery Protocol (I RDP) is an alternative ro uter discovery protocol using ICMP messages on multicast links. ICMP uses router discovery messages, known as router advertisements and router solicitations. Each router periodical ...

  • Avaya Cajun P882 - page 385

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 9-103 Configuring IP Routing 2. Select the interface on which to enable IRDP in the Select column. A checkmark displays. 3. Refer to Table 9-32 to configure the ICMP Router Discovery Protocol dialog box parameters. Table 9-32. ICMP Router Discovery Proto col Dialog Box Parame ...

  • Avaya Cajun P882 - page 386

    9-104 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 4. Select Enable from the IRDP State pull-down menu. 5. Select Multicast from the Adv. Address pull-down menu. 6. Modify the default value in the Min. Advertisement Interval (sec.) field and enter the min imum time interval that passes before the ho st cont ...

  • Avaya Cajun P882 - page 387

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 9-105 Configuring IP Routing Configuring LDAP Lightweight Directory Access Protocol (LDAP) allows you to access the “Access Control Lists”(ACLs), retr ieve them from a database on an LDAP server, and apply them to the Avaya P550R/P580/P880/ P882 Multiservice switches. You ...

  • Avaya Cajun P882 - page 388

    9-106 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 Figure 9-43. LDAP Configuration Dialog Box 2. Refer to Table 9-33 to configure the LDAP Configuration dialog box parameters. Table 9-33. LDAP Configuration Dialog Box Para meters Parameter Allows You To... Primary Server IP Address Enter the IP address of y ...

  • Avaya Cajun P882 - page 389

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 9-107 Configuring IP Routing 3. Click APPLY to save your changes, or CANCEL to restore previous settings. Using the CLI To configure LDAP settings on a pr imary and secondary server from the CLI, enter the following co mmand from configuration mode: To Change the LDAP search ...

  • Avaya Cajun P882 - page 390

    9-108 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 To configure policy retrieval to stop on the first e rror, or ignore errors, use the following CLI command. <configure># ldap execution-option {stop-on-error | ignore-errors} Refer to the Command Reference Guide for the Avaya P55 0R, P580, P8 80, and ...

  • Avaya Cajun P882 - page 391

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 9-109 Configuring IP Routing 3. Refer to Table 9-34 for an explanation of the LDAP Statistics dialog box parameters: Using the CLI To view configuration and LDAP stati stics using the CLI, enter the following command: > show ldap Refer to the Command Reference Guide for th ...

  • Avaya Cajun P882 - page 392

    9-110 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 Figure 9-45. IP Static Routes Dialog Box 3. Select CREATE . The Add IP Static Routes dialog box opens (Figure 9-46). Figure 9-46. Add IP Static Routes Dialog Box 4. Enter the IP address th at is to be associated with the PPP console port in the Network Addr ...

  • Avaya Cajun P882 - page 393

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 9-111 Configuring IP Routing Configuring the IP Interface for the PPP Console You can configure an IP interface for the PPP console from either the Web Agent or the CLI. Using the Web Agent To configure the PPP console with an IP address and mask using the Web Agent: 1. Confi ...

  • Avaya Cajun P882 - page 394

    9-112 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 Figure 9-47. Add IP Interface Dialog Box 5. Select Serial-Console from the VLAN field pull-down menu. This indicates the interface for the PPP console. 6. Enter the IP address in the Network Address field that is to be associated with the PPP console port. ...

  • Avaya Cajun P882 - page 395

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 9-113 Configuring IP Routing Using the CLI To configure the PPP co nso le af ter you have ma de all the appli ca ble cable connections with an IP address using the CLI , enter the following command in Interface mode: (config if <interface-name>)# ip VLAN {<VLAN- id&g ...

  • Avaya Cajun P882 - page 396

    9-114 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapte r 9 ...

  • Avaya Cajun P882 - page 397

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide,v5.3.1 10-1 10 Configuring RIP Routing Overview * Note: To globally enable the Routing Information Protocol (RIP), refer to Chapter 9, "Configuring IP Routing". The information and procedures prov ided in this chapter pertain to 50 series layer 3, and licensed 80 se ries mo ...

  • Avaya Cajun P882 - page 398

    10-2 Avaya P550R, P580, P880, and P882 Multiservice Switch User Gui de,v5.3.1 Chapter 10 Configuring RIP on the Switch Using the Web Agent To configure the RIP globally on your switch using the Web Agent: 1. Select Global Configuration from the Routing > IP > RIP group on the Web Agent window. The RIP Global Configuration dialog box opens (Fi ...

  • Avaya Cajun P882 - page 399

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide,v5.3.1 10-3 Configuring RIP Routing 3. Click APPLY to save your changes, or CANCEL to restore previous settings. Configuring RIP on the Switch Using the CLI To configure or modify the RIP para meters globally on your switch using the CLI, enter the following command in router:rip mod ...

  • Avaya Cajun P882 - page 400

    10-4 Avaya P550R, P580, P880, and P882 Multiservice Switch User Gui de,v5.3.1 Chapter 10 Figure 10-2. RIP Interfaces Dialog Box 2. Refer to Table 10-2 to modify the RIP interfaces dialog box parameters: Table 10-2. RIP Interface Dialog Box Parameters Parameter Allows you to... Select Select the RIP interfa ce to be modified . Interface Displays an ...

  • Avaya Cajun P882 - page 401

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide,v5.3.1 10-5 Configuring RIP Routing 3. Click APPLY to save your changes, or CANCEL to restore previous settings. Split Horizon Specify that IP ro utes learned from an immediate neighbor are not advertised back to the neighbor from which the ro utes were learned.Selections include: ? ...

  • Avaya Cajun P882 - page 402

    10-6 Avaya P550R, P580, P880, and P882 Multiservice Switch User Gui de,v5.3.1 Chapter 10 Using the CLI To modify RIP interfaces para meters using the CLI enter the following command from Configure mode: (configure)# interface <intf-name> | [type {mbna | ethernet}] Refer to the Command Reference Guide for the Avaya P55 0R, P580, P8 80, and P88 ...

  • Avaya Cajun P882 - page 403

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide,v5.3.1 10-7 Configuring RIP Routing 3. Click CREATE . The Add Trusted RIP Neighbor dialog box opens (Figure 10-4). 4. Click on the Select column checkbox for the Trusted Neighbor and click on APPLY to save your changes 5. Click on the Select column checkbox for the Trusted Neighbor a ...

  • Avaya Cajun P882 - page 404

    10-8 Avaya P550R, P580, P880, and P882 Multiservice Switch User Gui de,v5.3.1 Chapter 10 In a simple implementation, the user creates one Key in a Key Chain and this key is used unt il it expires.In an advanced implementation, a Key Chain contains multiple keys each valid for a limited amount of time. This provides a periodic change of the encrypti ...

  • Avaya Cajun P882 - page 405

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide,v5.3.1 10-9 Configuring RIP Routing Figure 10-5. Key Chain dialog bo x Table 10-3. Key Chain Parame ters Parame ter Defines the... Key Chain 1-16 character ASCII name of the Key Chain Key ID Three digit number of the Key. Valid range 1 to 255. Key Name 16 character alpha-numeric key. ...

  • Avaya Cajun P882 - page 406

    10-10 Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide,v5.3.1 Chapter 10 2. Click APPLY to save your changes, or CANCEL to restore previous settings. Using the CLI To assignor modify Key Chain parameters using the CLI, enter the following commands from router:rip mode: To create the Key Chain: (configure router:rip)# key chain < ...

  • Avaya Cajun P882 - page 407

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide,v5.3.1 10-11 Configuring RIP Routing Viewing RIP Statistics You can view RIP statistics using either the Web Agent o r the CLI. Viewing RIP Statistics Using the Web Agent To view RIP statistics using the Web Agent: 1. Select Interface Statistics from the Routing> IP > RIP group ...

  • Avaya Cajun P882 - page 408

    10-12 Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide,v5.3.1 Chapter 10 Viewing RIP Statistics Using the CLI To view RIP statistics using the CLI, enter the following command from Configure mode: > (configure)# show ip rip statistics Refer to the Command Reference Guide for the Avaya P55 0R, P580, P8 80, and P882 Multiservice S ...

  • Avaya Cajun P882 - page 409

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 11-1 11 Configuring the OSPF Routing Protocol Overview The following information and procedures provided in this chapter pertain to layer 3 module configuration only: ■ What is OSPF? ■ Monitoring Switch Performance Using OSPF Statistics ■ NBMA IP Interfaces What ...

  • Avaya Cajun P882 - page 410

    11-2 Avaya P550R, P580, P880 , and P882 Multis ervice Switch User Guide, Version 5.3.1 Chapter 11 ■ Backbone Router — a router that has at lease one directly connected network in the backbo ne area. This includes all ABRs. However, not all backbone routers must be ABRs. A backbone router that has all it s interfaces in the backbone would be an ...

  • Avaya Cajun P882 - page 411

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 11-3 Configuring the OSPF Routing Proto col Configuring the OSPF Global Configuration The OSPF global configuration allows you to globally configure OSPF on your switch. It also allows you to specify you r router ID and whether or not you want the switch to be the Aut ...

  • Avaya Cajun P882 - page 412

    11-4 Avaya P550R, P580, P880 , and P882 Multis ervice Switch User Guide, Version 5.3.1 Chapter 11 2. Refer to Table 11-1 to configure the OSPF Global Configuration dialog box parameters: 3. Click APPLY to save changes, or CANCEL to restore previous settings. Table 11-1. OSPF Global Configuration Dialog Box Parameters Parame ter Allows you to... OSP ...

  • Avaya Cajun P882 - page 413

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 11-5 Configuring the OSPF Routing Proto col Using the CLI To globally configure OSPF using the CL I, enter the following command in Configure mode: > (configure)# router ospf Refer to the Command Reference Guide for the Avaya P550R, P580, P8 80, and P882 Multiservi ...

  • Avaya Cajun P882 - page 414

    11-6 Avaya P550R, P580, P880 , and P882 Multis ervice Switch User Guide, Version 5.3.1 Chapter 11 Figure 11-3. ADD OSPF Area Dialog Box 3. Refer to Table 11-2 to configure the Add OSPF Area dialog box parameters: 4. Click CREATE to save your changes, or CANCEL to restore previous settings. Table 11-2. Add OSPF Area Dialog Box Parameters Parame ter ...

  • Avaya Cajun P882 - page 415

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 11-7 Configuring the OSPF Routing Proto col Creating OSPF Areas Using the CLI To create OSPF areas using the CLI, enter the following command in Enable/Configure mode: > (configure router ospf)# area <area-id> <option> Refer to the Command Reference Gui ...

  • Avaya Cajun P882 - page 416

    11-8 Avaya P550R, P580, P880 , and P882 Multis ervice Switch User Guide, Version 5.3.1 Chapter 11 Using the CLI To delete an OSPF area using the CLI, enter the following command in Enable/Configure mode: * Note: Before deleting an OSPF area, assign any interfaces that are associated with the area to a different area or delete the interfaces. <co ...

  • Avaya Cajun P882 - page 417

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 11-9 Configuring the OSPF Routing Proto col Enabling OSPF on an IP Interface You can create an OSPF inte rface using either the web ag ent or the CLI after you setup a VLAN and create an IP interface. Using the Web Agent After you have set up a VLAN, yo u must crea te ...

  • Avaya Cajun P882 - page 418

    11-10 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapter 11 4. In the Admin. State column for the interface that you want to modify, select DOWN . This step disables the interfac e and must be performed before you perform any OSPF modifications. 5. Click Apply . 6. In the navigation pane, expand the Routing & ...

  • Avaya Cajun P882 - page 419

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 11-11 Configuring the OSPF Routing Proto col e. Click Apply . Table 11-3. OSPF Interface Dialog Box Param eters Parame ter Definition Select Select the OSP F interface to b e modified. Interface Displays IP int erface (VLAN) that has OSPF enabled. Note: This is a read ...

  • Avaya Cajun P882 - page 420

    11-12 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapter 11 12. Click Apply to save the changes or Cancel to ignore the changes Using the CLI To modify an OSPF interface usin g the CLI, enter the following command: >(configure router ospf)# network <ip-address> <wildcard-mask><area-id> * ...

  • Avaya Cajun P882 - page 421

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 11-13 Configuring the OSPF Routing Proto col interface as a stub netwo rk in the router updates it sends to other OSPF interfaces. You can set OSPF passive-interf ace using either the Web Agent or the CLI. Using the Web You can set OSPF passiv e-interface f rom the OS ...

  • Avaya Cajun P882 - page 422

    11-14 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapter 11 Creating OSPF Virtual Links You can create OSPF Virtual links usin g either the Web Agent or the CLI. Creating OSPF Virtual Links Using the Web Agent To create a OSPF virtual link using the Web Agent: 1. Select Virtual Links from the Routing > IP ...

  • Avaya Cajun P882 - page 423

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 11-15 Configuring the OSPF Routing Proto col Figure 11-6. Add OSPF Virtual Link Dialog Bo x 3. Enter the new OSPF Link information. Refer to Table 11-4 for an explanation of the Add OSPF Virtual Link dialog box parameters: Table 11-4. Add OSPF Virtual Link Dialog Box ...

  • Avaya Cajun P882 - page 424

    11-16 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapter 11 4. Click CREATE to create the virtual link, or CANCEL if you do not want to create the OSPF virtual link. Using the CLI To create a OSPF virtual link using the CLI, enter the foll owing command from Configure mod e: >(configure router: ospf) area ...

  • Avaya Cajun P882 - page 425

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 11-17 Configuring the OSPF Routing Proto col Deleting OS PF Virtual Links Using the CLI To delete an OSPF virtual link using the CLI, enter the followi ng command from Enable/Configure mode: ( configure router: ospf)# [no] area <a rea- id> virtual-link <route ...

  • Avaya Cajun P882 - page 426

    11-18 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapter 11 Creating OSPF Summaries The primary purpose of the OSPF summary is route aggregation. Route aggregation is a group range of IP address es that are linked to a single address. You can create a new OSPF summary from either the Web Agent or the CLI. Usi ...

  • Avaya Cajun P882 - page 427

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 11-19 Configuring the OSPF Routing Proto col Figure 11-8. Add OSPF Summary Dial og Box 3. Refer to Table 11-5 fo r details about the Add OSPF Summary dialog box parameters: 4. Click CREATE to save the n ew OSPF summary, or CANCEL to ignore the new summa ry. Using the ...

  • Avaya Cajun P882 - page 428

    11-20 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapter 11 Deleting OSPF Summaries You can delete OSPF su mmaries using either the Web Agent or the CLI. Using the Web Agent To delete an OSPF summary using the Web Agent: 1. Select Summaries from the Routing > IP > OSPF group on the Web Agent window. The ...

  • Avaya Cajun P882 - page 429

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 11-21 Configuring the OSPF Routing Proto col Using the CLI To modify an OSPF summary using the CLI, enter the following command in Configure mode: (configure router: ospf)# area <area-id> range <ip-address> <mask> Refer to the Command Reference Guide ...

  • Avaya Cajun P882 - page 430

    11-22 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapter 11 Figure 11-9. OSPF Statistics Dialog Box 2. Refer to Table 11-6 for an explanation of the OSPF Statistics dialog box parameters: Table 11-6. OSPF Statistical Parameters Parame ter Displays the... OSPF State Current state of OSPF. Router ID Router ID f ...

  • Avaya Cajun P882 - page 431

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 11-23 Configuring the OSPF Routing Proto col 3. Click Refresh to reset the counters with the latest information. Using the CLI To display the OSPF global statistics using the CLI, enter the following command in Enable mode: ># show ip ospf stats ># show ip ospf ...

  • Avaya Cajun P882 - page 432

    11-24 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapter 11 Displaying OSPF Links The OSPF link display provides information on the currently active OSPF links. You can display the OSPF using either the Web Agent or the CLI. Using the Web Agent To display OSPF links using the Web Agent: 1. Select Links from t ...

  • Avaya Cajun P882 - page 433

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 11-25 Configuring the OSPF Routing Proto col Displaying OSPF Neighbors The OSPF neighbors table summarizes the list of OSPF interfaces and their associated neighbo rs. You can display OSPF neighbo rs using either the Web Agent or the CLI. Using the Web Agent To displa ...

  • Avaya Cajun P882 - page 434

    11-26 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapter 11 2. Refer to Table 11-8 to review the OSPF Neighbors dialog box parameters: Table 11-8. OSPF Neighbors Dialog Box Parameters Parame ter Definition IP Address The IP address associated with the OSPF neighbor. State The functiona l level of an interfac ...

  • Avaya Cajun P882 - page 435

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 11-27 Configuring the OSPF Routing Proto col Using the CLI To display the OSPF neighbors using the CLI, enter the following command in Priv mode: ># show ip ospf neighbor Refer to the Command Reference Guide for the Avaya P550R, P580, P8 80, and P882 Multiservi ce ...

  • Avaya Cajun P882 - page 436

    11-28 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapter 11 Figure 11-12. Link State Database Search Dialog B ox 2. To search by: — Area ID — click the Area ID checkbox and specify the IP address of the Area ID that you want to find in the database, and click SEARCH. — Type — click the Type checkbox a ...

  • Avaya Cajun P882 - page 437

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 11-29 Configuring the OSPF Routing Proto col 3. Refer to Table 11-9 for an explanation of the OSPF Link State Database Search d ialog box parameters: 4. If your search produces results, the detailed information displays in the OSPF Link State Database dialog box (Figu ...

  • Avaya Cajun P882 - page 438

    11-30 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapter 11 Figure 11-13. OSPF Link State Database Dialog Box 5. Refer to Table 11- 10 for an explanation of the OSPF Link State Database dial og box parameters. Table 11-10. OSPF Link Sta te Database Parameters Parame ter Displays... Detail Link A link to the L ...

  • Avaya Cajun P882 - page 439

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 11-31 Configuring the OSPF Routing Proto col 6. To update all LSA entries in the database, select Re fresh Table . 7. To display the details of a specific link state advertisement (LSA), select Details from the Detail Link co lumn The LSA Details dialog box displays w ...

  • Avaya Cajun P882 - page 440

    11-32 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapter 11 8. Refer to Table 11- 11 for an explanation of the LSA Detail dialog box parameters. 9. To update the LSA entry, select Refresh Entry . Searching the OSPF Link State Database Using the CLI To search the OSPF link state database using the CLI, enter t ...

  • Avaya Cajun P882 - page 441

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 11-33 Configuring the OSPF Routing Proto col NBMA IP Interfaces Overview Non-broadcast multi-access (NBMA) functionali ty was added to RIP and OSPF routing protoco ls on the Avaya Multiservice switch software. Support for this functionality was added to enable route e ...

  • Avaya Cajun P882 - page 442

    11-34 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapter 11 Setting Up an NBMA IP Interface You can set up an NBMA IP interface by using either the Web Agent or the Command Line Interface (CLI). Using Web Agent To use the Web Agent to set up an NBMA IP interface: * Note: RIP or OSPF must be enabled to set up ...

  • Avaya Cajun P882 - page 443

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 11-35 Configuring the OSPF Routing Proto col CLI Commands To use the CLI to set up an NBMA IP interface: 1. Enter Configuration mode. The CLI displays the following prompt: <configure># For information on how to enter this mode, see “Accessing/Exiting the Comm ...

  • Avaya Cajun P882 - page 444

    11-36 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapter 11 CLI Commands for OSPF To set up NBMA neighbors on OSPF, you must first create an OSPF interface. 1. After you create an OSPF interface, enter the following command: router ospf The following prompt is displayed: Avaya(configure router:ospf)# 2. Enter ...

  • Avaya Cajun P882 - page 445

    Avaya P550R, P580, P880, and P882 Multiservi ce Switch Us er Guide, Version 5.3.1 11-37 Configuring the OSPF Routing Proto col RIP2 MD5 Authentication sequence n umbers do not persist after you reset the switch. CLI Commands for RIP To set up an NBMA neighbor on RIP, you must first create a RIP interface. 1. After you create a RIP interface, enter ...

  • Avaya Cajun P882 - page 446

    11-38 Avaya P550R, P580, P880 , and P88 2 Multis ervice Switch User Guide, Version 5.3.1 Chapter 11 ...

  • Avaya Cajun P882 - page 447

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 12-1 12 Configuring IPX Routing Overview This chapter provides the following information and procedures for configuring 50, 80 series layer 2 mo dules, 50 series Layer 3 or 80 series Licensed Layer 3 modules. Refer to Chapter 1 “Introduction” for more details about routin ...

  • Avaya Cajun P882 - page 448

    12-2 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 12 IPX Datagram Structure The IPX datagram contains an IPX header and any data to be transferred on the network. The IPX header is a 30 byte heade r that contains 10 fields. Figure 12-1 illust rates a conceptual view of an IPX datagram: Figure 12-1. IPX Datagra ...

  • Avaya Cajun P882 - page 449

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 12-3 Configuring IPX Routing Configuring the Avaya Switch as an IPX Router You can configure the Avaya P550R/P580/P880/P 882 Multiservice switch as an IPX router. Specific hardware is required to accomplish this configuration. Hardware Requirements To configure your switch as ...

  • Avaya Cajun P882 - page 450

    12-4 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 12 Configuring IPX Routing Globally You can configure IPX rout ing glob ally using the Web Agent or the CLI. Web Agent Procedure To Enable or Disable IPX routing globally using the Web Agent: 1. Select Global Configuration from the Routing > IPX > Configu ...

  • Avaya Cajun P882 - page 451

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 12-5 Configuring IPX Routing 3. Click APPLY to save your changes, or CANCEL to restore previous settings. CLI Commands To enable IPX routing globally us ing the CLI, ente r the following command from Configure mod e: <configure># ipx routing To enable IPX routing Global ...

  • Avaya Cajun P882 - page 452

    12-6 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 12 Figure 12-3. IPX Interfaces Dialog Box 2. To create a new IPX interface Click on CREATE * Note: Only the create button is show n if no IPX Interfaces are configured. 3. The Add IPX interface Dialog Box opens (Figure 12-4) Figure 12-4. ADD IPX Interface Dialo ...

  • Avaya Cajun P882 - page 453

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 12-7 Configuring IPX Routing Figure 12-5. Add IPX Interface Dialog Bo x *Note: Due to its length, the IPX Interfaces dialog box is split into two views. 6. To view or modify IPX Interfaces, select IPX Interfaces from Routing > IPX > Configuration group on the Web Agent ...

  • Avaya Cajun P882 - page 454

    12-8 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 12 7. Click APPLY to save your changes or CANCEL to restore previous settings. Table 12-3. IPX Interface Dial og Box Parameters Parameter Allows you to... Select Select the Interface to be configured. Thi s field id displayed in the IP X Interfaces Dialog box n ...

  • Avaya Cajun P882 - page 455

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 12-9 Configuring IPX Routing CLI Command To begin the creation o f a new IPX interfac e using the CLI, enter the following command in Configure mode: <configure># interface <interface name> Refer to the Command Reference Guide for the Avaya P550R, P580, P8 80, and ...

  • Avaya Cajun P882 - page 456

    12-10 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 12 Figure 12-6. IPX Static Routes Dialog Box 2. To create a new IPX Static Route Click on CREATE * Note: Only the create button is show n if no IPX Static Routes are configured. 3. The Add IPX Static Route dialog box opens (see Figure 12- 7). Figure 12-7. Add ...

  • Avaya Cajun P882 - page 457

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 12-11 Configuring IPX Routing 5. Click APPLY to save your changes, or CANCEL to restore previous settings. 6. To view or modify IPX Static Rout es, select Static Routes from Routing > IPX > Configuration group on the Web Agent window. The configured IPX Stat ic Routes d ...

  • Avaya Cajun P882 - page 458

    12-12 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 12 Deleting IPX Static Routes You can delete an IPX s tatic route using either the Web A gent or the CLI. Web Agent Procedure To delete an IPX static route using the Web Agent: 1. Select Static Routes from the Routing > IPX > Configuration group on the W ...

  • Avaya Cajun P882 - page 459

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 12-13 Configuring IPX Routing CLI Command To modify an IPX static route us ing the CLI, enter the following command Interface mode: (config-if:<if-name>)# ipx route <network address | range> <options> Refer to the Command Reference Guide for the Avaya P550R, ...

  • Avaya Cajun P882 - page 460

    12-14 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 12 Figure 12-10. Add IPX Static Service Dialog B ox 3. Refer to Table 12-5 to configure the Add IPX Static Service dialog box parameters. Table 12-5. IPX Static Service Dialog Box Parameters Parame ter Allows you to... Service Name Enter the I PX Static Servic ...

  • Avaya Cajun P882 - page 461

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 12-15 Configuring IPX Routing 4. Click APPLY to save your changes, or CANCEL to restore previous settings. 5. To view or modify IPX St atic Services, select Static Se rvices from Routing > IPX > Configuration group on the Web Agent window. The configured IPX Static Serv ...

  • Avaya Cajun P882 - page 462

    12-16 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 12 Figure 12-11. IPX Static Services Dialog Box CLI Command To create IPX static services using the CLI, enter the following command in Configure mode: <configure># ipx service <service-type type |range> Refer to the Command Reference Guide for the ...

  • Avaya Cajun P882 - page 463

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 12-17 Configuring IPX Routing Modifying IPX Static Service You can modify an IPX static service using either the Web Agent or the CLI. Web Agent Procedure To modify an IPX static service using the Web Agent: 1. Select Static Services from the Routing > IPX > Configurati ...

  • Avaya Cajun P882 - page 464

    12-18 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 12 Displaying IPX Global Statistics IPX Global Statistics count only the IPX packets that are received by or sent from the Supervisor module, not those packets routed in hardware. You can display the IPX Global statistics using either the We b Agent or the CLI ...

  • Avaya Cajun P882 - page 465

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 12-19 Configuring IPX Routing 4. Refer to Table 12-6 for a explanation of the IPX Glo bal Statistics dialog box parameters: CLI Command To display the global IPX routing statistics using the CLI, enter the following command from Configure mode: <configure># show ipx tra ...

  • Avaya Cajun P882 - page 466

    12-20 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 12 Refer to the Command Reference Guide for the Avaya P55 0R, P580, P8 80, and P882 Multiservice Sw itches, Version 5.3.1 for details about this command. Searching the IPX Route Table To search the IPX route table: 1. Select Route Table Search from the Routing ...

  • Avaya Cajun P882 - page 467

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 12-21 Configuring IPX Routing 3. Refer to Table 12-7 to dete rmine the search parameters: 4. Click on the Search button to start: — If the available routes are fo und they are displayed in the IPX Route Table dialog box. — If no routes are available, a me ssage is display ...

  • Avaya Cajun P882 - page 468

    12-22 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 12 Displaying IPX Route Table Statistics To display your IPX route table statistics: 1. Select Route Table Statistics from the Routing > IPX > Display Web Agent window. The IPX Route Table Statistics dialog box opens (see Figure 12-14). Figure 12-14. IPX ...

  • Avaya Cajun P882 - page 469

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 12-23 Configuring IPX Routing Searching the IPX Service Table To search the IPX service table: 1. Select Service Table Search from the Routing > IP X > Display Web Agent window. The IPX Service Tabl e Search dialog box opens (see Figure 12-15). Figure 12-15. IPX Service ...

  • Avaya Cajun P882 - page 470

    12-24 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 12 3. Refer to Table 12-10 to dete rmine the search parameters: 4. Click on the SEARCH to start the search. — If available services are found they are displayed in IPX Service Table dialog box. — If services are not available, a m essage di sp lays in the ...

  • Avaya Cajun P882 - page 471

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 12-25 Configuring IPX Routing 2. Refer to Table 1 2- 11 to review each field in the IPX Services table: Displaying IPX Service Table Statistics To display the IPX service table statistics: 1. Select Service Table Statistics from the Routing > IPX > Display Web Agent win ...

  • Avaya Cajun P882 - page 472

    12-26 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 12 Figure 12-16. IPX Service Table Statistics 2. Refer to Table 12- 12 to review each statis tic: Table 12-12. IPX Service Table Statistics Dialog Box Statistic Defines the... Current Number of Services The current number of IPX service s. Peak Number of Servi ...

  • Avaya Cajun P882 - page 473

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 13-1 13 Configuring the IPX RIP Protocol Overview The information and procedures prov ided in this chapter pertain to layer 3 module configuration only. This chapter provides information about th e Internetwork Pack et Exchange (IPX) Routing Interface Protocol (RIP) and proce ...

  • Avaya Cajun P882 - page 474

    13-2 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 13 2. Refer to Table 13-1 to modify the IPX RIP Interfaces dialog box parameters: Table 13-1. IPX RIP Interfaces Dialog Box Parameters Parame ter Allows you to... Select Select a RIP interface to modify . Note: This field is displayed in the IPX RIP Interface d ...

  • Avaya Cajun P882 - page 475

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 13-3 Configuring the IPX RIP Protocol 3. Click APPLY to save your changes, or CANCEL to restore previous settings. CL Command To configure IPX RIP interfaces using the CLI, enter the following command in Interface m ode: (config-if: <if name>):# ipx rip Refer to the Com ...

  • Avaya Cajun P882 - page 476

    13-4 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 13 Figure 13-3. Add IPX RIP Filter Dialog Box 3. Refer to Table 13-2 to modify the Add IPX RIP Filter dialog box parameters.: Table 13-2. Add IPX RIP Filters Dialog Box Para meters Parame ter Allows you to... Select The Select chechbox select s the IPX Interfac ...

  • Avaya Cajun P882 - page 477

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 13-5 Configuring the IPX RIP Protocol 4. Click APPLY to save your changes, or CANCEL to restore previous settings. Example #1: Configuring your switch to suppress advertising of network 10 To configure your switch to supp ress the advertising of network 10 on the IPX interfac ...

  • Avaya Cajun P882 - page 478

    13-6 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 13 1. Select Filters from the Routing > IPX > RIP group in the Web Agent window. The IPX RIP Filters dialog box opens (Figure 13-3). 2. Select CREATE to create a new filter. The Add IPX RIP Filter dialog box opens (Figure 13-3).Configure the following par ...

  • Avaya Cajun P882 - page 479

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 13-7 Configuring the IPX RIP Protocol d. Enter 10 in the End Network field. e. Select Outbound from the Direction pull-down menu. f. Select Disable from the Filter/Suppress pull-down menu. g. Enter 0 in the Ticks and Hops fields. Filter 1 ensures that the advertisin g of netw ...

  • Avaya Cajun P882 - page 480

    13-8 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 13 Refer to the Command Reference Guide for the Avaya P55 0R, P580, P8 80, and P882 Multiservice Sw itches, Version 5.3.1 for details about this command. Viewing RIP Interface Statistics You can view RIP Interface Sta tistics from either the Web Agent or the CL ...

  • Avaya Cajun P882 - page 481

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 13-9 Configuring the IPX RIP Protocol CLI Command To interpret IPX RIP interface stat istics using the CLI, enter the following command from Interface mode: (config-if <interface name>)# show ipx interface [<intf-name>] Refer to the Command Reference Guide for the ...

  • Avaya Cajun P882 - page 482

    13-10 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 13 ...

  • Avaya Cajun P882 - page 483

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 14-1 14 Configuring the IPX SAP Protocol Overview The information and procedures prov ided in this chapter pertain to layer 3 module configuration only. This chapter provides information about the Internetwork Packet Ex change (IPX) Service Advertising Protocol (SAP) and proc ...

  • Avaya Cajun P882 - page 484

    14-2 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 14 2. Refer to Table 14-1 to configure the IPX SAP Interface dialog box parameters: Table 14-1. IPX SAP Interface Dialog Box Parame ters Parame ter Allows you to... Select Select a SAP interface to modify. Interface Identifies th e IPX interf ace associated wit ...

  • Avaya Cajun P882 - page 485

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 14-3 Configuring the IPX SAP Protocol 3. Click APPLY to save your changes, or CANCEL to restore previous settings. CLI Command To configure the IPX SAP interfaces using the CLI, enter the following command from Interface mode: (config-if <interface-name>):# ipx sap Refe ...

  • Avaya Cajun P882 - page 486

    14-4 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 14 Creating IPX SAP Name Filters You can create IPX SAP name filter suing either the Web Ag ent or the CLI. Web Agent Procedure To create IPX SAP name filters using the We b Agent: 1. Select Name Filters from the Routing > IPX > S AP group on the Web Agen ...

  • Avaya Cajun P882 - page 487

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 14-5 Configuring the IPX SAP Protocol Figure 14-3. Add IPX SAP Name Filter Dialog Box 3. Configure an IPX SAP name filt er. Refer to Table 14-2 for an explanation of the Add IPX SAP Name Filter dialog box parameters: Table 14-2. IPX SAP Name Filter Dialog Box Parameters Param ...

  • Avaya Cajun P882 - page 488

    14-6 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 14 Type Enter the service type that id entifies the typ e of service the server provides. Well-known service ty pes include : • Unknown (0) • Print Queue (3) • File Server (4) • Job Server (5) • Print Server (7) • Archive Server (9) • Remote Bridg ...

  • Avaya Cajun P882 - page 489

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 14-7 Configuring the IPX SAP Protocol 4. Click APPLY to save your changes, or CANCEL to restore previous settings. Example: Suppress Advertising of all Print Servers on Interface Remote To configure your switch to suppress the advertising of all Print Servers (for example, ty ...

  • Avaya Cajun P882 - page 490

    14-8 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 14 e. Select Outbound from the Direction pull-down menu. f. Select Enable from the Filter/Suppress pull-down menu. g. Enter 0 in the Hops field. This ensures that there is no override in the transmission of data on the network. 4. Click APPLY to save your chang ...

  • Avaya Cajun P882 - page 491

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 14-9 Configuring the IPX SAP Protocol 2. Select CREATE . The Add IPX SAP Net Filter dialog box opens (Figure 14-5). Figure 14-5. Add IPX SAP Net Filter Dia log Box 3. Refer to Table 14-3 to configure the Add IPX SAP Net Filters dialog box parameters: Table 14-3. Add IPX SAP N ...

  • Avaya Cajun P882 - page 492

    14-10 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 14 Type Specify the service type (in hex) that identifies the type of service the server provides . Well-known service types include: • Unknown (0) • Print Queue (3) • File Server (4) • Job Server (5) • Print Server (7) • Archive Server (9) • Rem ...

  • Avaya Cajun P882 - page 493

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 14-11 Configuring the IPX SAP Protocol 4. Click APPLY to save your changes, or CANCEL to restore previous settings. Example: Filtering all Services Except Netware Directory Services (NDS) To configure your switch to filter all services except NDS a specific Interface, you mus ...

  • Avaya Cajun P882 - page 494

    14-12 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 14 Filter 2 Filter 2 ensures that a ll networks and service types are filtered for the indicated interface. 1. Select Net Filters from the Routing > IPX > SAP gro up on the Web Agent window. The IPX SAP Net Filters dialog box opens (Figure 14-4). 2. Clic ...

  • Avaya Cajun P882 - page 495

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 14-13 Configuring the IPX SAP Protocol Interpreting IPX SAP Interface Statistics You can interpret IPX SAP interface statistics using either the Web Agent or the CLI. Web Agent Procedure To interpret IPX SAP interface statistic using the Web Agent: 1. Select Interface Statist ...

  • Avaya Cajun P882 - page 496

    14-14 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 14 3. Click on CLEAR to remove the statistics, or REFRESH to access current interface statistics. CLI Command To interpret IPX SAP interface statistics using the CLI, enter the following command from Interface mode: (config-if <interface name>)# show ipx ...

  • Avaya Cajun P882 - page 497

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 15-1 15 Configuring AppleTalk Routing Overview The following information and procedures provided in this chapter pertain to layer 3 module configuration only: ■ Implementation ■ Configuring AppleTalk Routing ■ Viewing AppleTalk S tatistics Implementation This section in ...

  • Avaya Cajun P882 - page 498

    15-2 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 15 The supported Ethernet versions are: ■ Ethernet SNAP ■ Ethernet II The Avaya P550R/P580/P880/P882 Multis ervi ce switch supports the following AppleTalk protocols: ■ AppleTalk Address Resolution Protocol (AARP) This is an AppleTalk support protocol tha ...

  • Avaya Cajun P882 - page 499

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 15-3 Configuring AppleTalk Routing ■ Zone Information Protocol (ZIP) AppleTalk routers use this protocol to map network numbers to zones. Each AppleTalk router maintains a Zone information Table which lists the zone-to-network mapping information. For more detailed informat ...

  • Avaya Cajun P882 - page 500

    15-4 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 15 ■ Editing AppleTalk Static Routes ■ Deleting an AppleTalk Static Route ■ Creating an AppleTal k Name-B inding Protocol (NBP) Filter ■ Editing an AppleTalk NBP Filter ■ Adding or Deleting Interfaces to an NBP Filter ■ Creating an AppleTal k Zone F ...

  • Avaya Cajun P882 - page 501

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 15-5 Configuring AppleTalk Routing Creating an AppleTalk Routing Interface You can create an AppleTalk routing interface using the Web Agent or CLI. Using the Web Agent To create an AppleTalk routing interface using the Web Agent: 1. Enable AppleTalk ro uting glob ally. Refer ...

  • Avaya Cajun P882 - page 502

    15-6 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 15 Figure 15-3. Add AppleTalk Interfaces Dia log Box 4. Refer to Table 15-1 to configure the Add AppleTalk Interface dialog box parameters: Table 15-1. Add AppleTalk Interface Dialog Box Param eters Parame ter Definition Interface Enter the name of the AppleTal ...

  • Avaya Cajun P882 - page 503

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 15-7 Configuring AppleTalk Routing 5. Click Apply to add the new AppleTalk interface, or CANCEL to restore previous settings. Once you click Apply, you are returned to the AppleTalk Interfaces dialog box (Figure 15-4.) Figure 15-4. AppleTalk Interfaces Using the CLI Use the f ...

  • Avaya Cajun P882 - page 504

    15-8 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 15 (config if-:<interface-name>)# appletalk address <network.node> (config if-:<interface-name>)# appletalk zone <zone-name> (config if-:<interface-name>)# appletalk vlan <vlan-id> Refer to the Command Reference Guide for the ...

  • Avaya Cajun P882 - page 505

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 15-9 Configuring AppleTalk Routing 4. To change a zone name(s), place a check mark(s) in the Select column a nd make the change (s) to the zo ne n ame(s). Click Apply to save the new AppleTalk zone, or either Delete or Cancel to remove the new zone. 5. Select Interfaces from ...

  • Avaya Cajun P882 - page 506

    15-10 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 15 17. Select the AppleTalk interface that you want to update in the Select column. 18. Click APPLY to save your cha nges, or CANCEL to restore previous settings. *Note: You may select and change multiple interfaces simultaneously with one APPLY operation. Usi ...

  • Avaya Cajun P882 - page 507

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 15-11 Configuring AppleTalk Routing Using the CLI Use the following CLI commands in interface mode to delete an AppleTalk interface: (config if-:<interface-name>)# no appleta lk cable-range <cable-range> (config if-:<interface-name>)# no appleta lk address & ...

  • Avaya Cajun P882 - page 508

    15-12 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 15 Figure 15-9. Add AppleTalk Stati c Route Dialog Box 3. Refer to Table 15-2 to configure the Add AppleTalk Static Route dialog box parameters. Table 15-2. Add AppleTalk Stati c Route Dialog Box Parameters Parame ter Definition Network Range Start Enter the s ...

  • Avaya Cajun P882 - page 509

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 15-13 Configuring AppleTalk Routing 4. Click APPLY to add the static route, or CANCEL to restore previous settings. When you click APPLY , you are returned to the AppleTalk Static Route dialog box . Using the CLI To create an AppleTalk static route using the CLI, enter the fo ...

  • Avaya Cajun P882 - page 510

    15-14 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 15 Figure 15-11. Edit AppleTalk Z one. 3. If you need to add a new zone, enter the new AppleTalk zone name and click Add in the Add text field. If you need to delete a zone(s), place a ch eck in the Select column next to the zone you need to delete then click ...

  • Avaya Cajun P882 - page 511

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 15-15 Configuring AppleTalk Routing Deleting an AppleTalk Static Route You can delete an AppleTalk static route using either the Web Agent or the CLI. Using the Web Agent To delete an AppleTalk static route us ing the Web Agent: 1. Select Static Route from the R outing > A ...

  • Avaya Cajun P882 - page 512

    15-16 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 15 ■ Name deletion ■ Name lookup ■ Name confirmation NBP allows you to bind a n ame to the internal storage a ddress for your entity and register this mapping so that other entities can look it up. You can display NBP names to users and use addresses int ...

  • Avaya Cajun P882 - page 513

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 15-17 Configuring AppleTalk Routing Figure 15-14. Add AppleTalk NBP Filter Dialog Box 3. Refer to Table 15-3 to configure the Add AppleTalk NBP filter dialog box. 4. Click CREATE to add your new static route, or CANCEL to restore previous settings. Using the CLI To create an ...

  • Avaya Cajun P882 - page 514

    15-18 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 15 Editing an AppleTalk NBP Filter You can edit an AppleTalk NBP filter using either the Web Ag ent or the CLI. Using the Web Agent To edit an AppleTalk NBP filter using the Web Agent: 1. Select NBP Filter from the Routing > AppleTalk > Configuration gro ...

  • Avaya Cajun P882 - page 515

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 15-19 Configuring AppleTalk Routing Refer to the Command Reference Guide for the Avaya P550R, P580, P8 80, and P882 Multiservice Switches, v5.3.1 for details about this command. Adding or Deleting Interfaces to an NBP Filter You can add or delete interfaces to an NBP filter u ...

  • Avaya Cajun P882 - page 516

    15-20 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 15 Using the CLI To add interfaces to an NBP filter using the CLI, enter the following command from Interface mod e: (config-if <interface-name>:)# appletalk access- list <access-list-number> <permit | deny> nbp <string> To delete inter ...

  • Avaya Cajun P882 - page 517

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 15-21 Configuring AppleTalk Routing Figure 15-18. Add Ap pleTalk Zone Filter Dialog Box 3. Refer to Table 15-4 to configure the Add AppleTalk Zone Filter dialog box parameters: 4. Click APPLY to add the new zone filter, or CANCEL to restore previous settings. Using the CLI To ...

  • Avaya Cajun P882 - page 518

    15-22 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 15 Editing an AppleTalk Zone Filter You can edit an AppleTalk zone filter using either the Web Agent or the CLI. Using the Web Agent To edit an AppleTalk zone filter using the Web Agent: 1. Select Zone Filter from the R outing > AppleTalk > Configuration ...

  • Avaya Cajun P882 - page 519

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 15-23 Configuring AppleTalk Routing Adding or Deleting Interfaces to a Zone Filter You can add or delete inte rfaces to a zone filter using eithe r the Web Agent or the CLI. Using the Web Agent To add or delete interfaces to a zone filter using the Web Agent: 1. Select Zone F ...

  • Avaya Cajun P882 - page 520

    15-24 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 15 Using the CLI To add interfaces to a zone filter using the CLI, enter the following command from Interface mode: (config-if <interface-name>:)# appletalk access- list <access-list-number> <permit | deny> zone <string> To delete inter ...

  • Avaya Cajun P882 - page 521

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 15-25 Configuring AppleTalk Routing Figure 15-20. AppleTalk Global Statistics Dialog Box 2. Refer to Table 15-5 for information about the Appl eTalk Global Statistics dialog box parameters. Table 15-5. AppleTalk Global S tatistical Dialog Box Parameters Parameter Number of... ...

  • Avaya Cajun P882 - page 522

    15-26 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 15 DDP Fwd Counter DDP packets forwarded through this node. DDP Local Counter DDP packets re ceived destined f or this node. No Client Packets received for whi ch the destinat ion socket was not known. No Route Packets received for whic h the destination route ...

  • Avaya Cajun P882 - page 523

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 15-27 Configuring AppleTalk Routing 3. C lick REFRESH to update all statistics, or CLEAR to reset all statistics to zero. Using the CLI To view AppleTalk global statistics using the CLI, e nter the following command from Enable/Configure mode: # show appletalk traffic Refer t ...

  • Avaya Cajun P882 - page 524

    15-28 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 15 2. Refer to Table 15-6 for information on the AppleTalk Interface Statistics Table parameters: Using the CLI To view the AppleTalk Interface statistics table using the CLI , enter the following command from Config mode: # show appletalk interface brief < ...

  • Avaya Cajun P882 - page 525

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 15-29 Configuring AppleTalk Routing Figure 15-22. AppleTalk Route Table Window 2. Refer to Table 15-7 for information about the Appl eTalk Route Table parameters: 3. Click Delete Entries to remove selected route table entrie s. Or Table 15-7. AppleTalk Route Table P arameters ...

  • Avaya Cajun P882 - page 526

    15-30 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 15 Click Flush Route Table to empty the route table of all dynamic entries. Static and Local entries are not flushed. Using the CLI To view the AppleTalk Interface statistics table using the CLI , enter the following command: ># show appletalk route Refer t ...

  • Avaya Cajun P882 - page 527

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 15-31 Configuring AppleTalk Routing Viewing the AppleTalk ARP Cache Table You can view the AppleT alk ARP cache table using either the Web Agent or the CLI. Using the Web Agent To view the AppleTalk ARP cache table using the Web Agent: 1. Select ARP Table from the Routing > ...

  • Avaya Cajun P882 - page 528

    15-32 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 15 3. Select the checkbox next to any specific ARP entries that you want to delete and click Delete Entries . or Click Flush Route Table to reset the ARP cache table entries. Only Dynamic and Router Neig hbor entries are flushed. Using the CLI To view the Appl ...

  • Avaya Cajun P882 - page 529

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 15-33 Configuring AppleTalk Routing Figure 15-25. AppleTalk Zone Table 2. Refer to Table 1 5- 10 for an explan ation of the AppleTalk Zone Table parameters. Using the CLI The command to show AppleTalk Zone St atistics currently does not exist. Viewing AppleTalk Zone Table Sta ...

  • Avaya Cajun P882 - page 530

    15-34 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 15 Figure 15-26. AppleTalk Zone Ta ble Statistics Table 2. Refer to Table 15- 11 for an explanation of the AppleTalk Zone Table Statistics parameters. Using the CLI To view AppleTalk zone table statistics using the CLI, enter the following command from User mo ...

  • Avaya Cajun P882 - page 531

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 15-35 Configuring AppleTalk Routing 2. Refer to Table 15-12 for an explanation of the AppleTalk NBP Table parameters: Using the CLI To view the Apple T alk NBP table using the CLI, enter the following command from User mode: > show appletalk nbp <cr | nbp-name> Refer ...

  • Avaya Cajun P882 - page 532

    15-36 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 15 ...

  • Avaya Cajun P882 - page 533

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 16-1 16 Managing Intelligent Multicasting Overview The following information and procedures provided in this chapter pertain to layer 2 and layer 3 module configurations: ■ Introduction ■ Configuring Global Intelligent Multicasting ■ Displaying Router Ports ■ Configur ...

  • Avaya Cajun P882 - page 534

    16-2 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 16 A client port is a port with an attached host configured to receive a multicast session. Router ports are ports that are a ttached to (or in the path to) multicast routers and must be treated specially. All multicast traffic on a VLAN must be forwarded to th ...

  • Avaya Cajun P882 - page 535

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 16-3 Managing Intelligent Multica sting Dynamic Intelligent Multicasting In an environment that uses IGMP (and an IP multicast routing protocol, optionally), Dynamic Inte lligent Multicasting may be used. The ability of the switch to dynamically set up sessions and add or rem ...

  • Avaya Cajun P882 - page 536

    16-4 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 16 Automatic Session Pruning, if enable d, will remove a session if that session has not been active for Session Pruning Time. Automatic Client Port Pruning, if enabled, will remove a client port from a session if no IGMP reports have been received on that port ...

  • Avaya Cajun P882 - page 537

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 16-5 Managing Intelligent Multica sting LGMP and CGMP are similar protocols. Both protocols have a server implementation that runs on a swit ch that implements the Learning Process, and both protocols have a client implementation which runs on switches that do not have lo cal ...

  • Avaya Cajun P882 - page 538

    16-6 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 16 * Note: You cannot delete Static sess ions and client ports from this dialog box. Refer to “ Deleting a Multicast Session Client Port ” and “ Deleting Static Multicast Sessions ”, in this chapter to delete static sessions and client ports. Figure 16- ...

  • Avaya Cajun P882 - page 539

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 16-7 Managing Intelligent Multica sting 2. Refer to Table 2 to configure the Intelligent Global Multicast Configuration dialog box parameters: 3. Click — APPLY to save your changes. — CANCEL to restore previous settings. — Delete All Learned Sessions to remove all learn ...

  • Avaya Cajun P882 - page 540

    16-8 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 16 Using the CLI To configure intelligent multicasting globally using the CLI, enter the following command from Configure mode: <configure># set intelligent-multicast {enable} Refer to the Command Reference Guide for the Avaya P55 0R, P580, P8 80, and P88 ...

  • Avaya Cajun P882 - page 541

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 16-9 Managing Intelligent Multica sting 3. Refer to Table 3 for an explanation of the Router Port Display/Configuration Dialog Box parameters. 4. Select a router p ort from the Port column and click DELETE to delete the port, or CANCEL to restore previous settings. Using the ...

  • Avaya Cajun P882 - page 542

    16-10 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 16 2. Select Display/Configure Router Ports . The Router Port Display/Configuration dialog box opens (Figure 16-3). 3. Enter a port number in the Port field. 4. Select All from the VLAN column to add th is router port to all VLANs Or Select a specific VLAN fro ...

  • Avaya Cajun P882 - page 543

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 16-11 Managing Intelligent Multica sting Figure 16-4. Intelligent Multicast Session Search Dialog Box 2. Refer to Table 2 for an explanation of the Intelligent Multicast Session Search dialog box parameters. 3. Select SEARCH to begin the search for the multicast session. The ...

  • Avaya Cajun P882 - page 544

    16-12 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 16 Figure 16-5. Multicast Sessions Dialog Bo x 4. Refer to Table 16-4 for an explanation of the Multicast Sessions dialog box parameters: Table 16-4. Multicast Sessions Dialog Box Parameters Parame ter Definition Select Select the multicast sessio n. Session I ...

  • Avaya Cajun P882 - page 545

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 16-13 Managing Intelligent Multica sting Using the CLI To perform a session search using the CLI, enter the following command from User mode: # show intelligent-multicast session <options> Refer to the Command Reference Guide for the Avaya P550R, P580, P8 80, and P882 M ...

  • Avaya Cajun P882 - page 546

    16-14 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 16 Deleting a Multicast Session Client Port You can delete an intelligent mult icast session client port by using either the Web Agent or the CLI. Using the Web Agent To delete a multicast session clie nt port by using the Web Agent: 1. Select Session Search f ...

  • Avaya Cajun P882 - page 547

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 16-15 Managing Intelligent Multica sting 5. Click DELETE to remove your selected multicast session client port, or CANCEL to restore previous settings. * Note: Static (Mgmt) client ports can only be removed through the Static Sessions dialog box. Using the CLI To delete a mul ...

  • Avaya Cajun P882 - page 548

    16-16 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 16 Figure 16-8. Static Multicast Session Configuration Dialog Box 3. Configure the Static Multicast Sessi on Configuration dialog box parameters (refer to Table 16-6): 4. Click APPLY to create the new static multicast session, or CANCEL to restore previous set ...

  • Avaya Cajun P882 - page 549

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 16-17 Managing Intelligent Multica sting Using the CLI To create a new static multicast session using the CLI, enter the following command from Configure mode: <configure># set intelligent-multicast static-session <options> Refer to the Command Reference Guide for ...

  • Avaya Cajun P882 - page 550

    16-18 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 16 Table 16-7. Static Multicast Sessions Dialog Box 3. Select the checkbox next to the static multicast session that you want to delete. 4. Click DELETE to remove the static multicast session. Using the CLI To delete a static multicast session using the CLI, e ...

  • Avaya Cajun P882 - page 551

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 16-19 Managing Intelligent Multica sting 2. Select the number from the Static Client Ports column. The Static Multicast Sessions Client Ports dialog box opens (Figure 16-10). Figure 16-10. Static Multicast Session s Clients Port Dialog Box 3. Enter the new port number to be a ...

  • Avaya Cajun P882 - page 552

    16-20 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 16 Using the CLI To delete static client ports using the CLI, enter the following command from Configure mode: <configure># clear intelligent-multicast static- client-port <options> Refer to the Command Reference Guide for the Avaya P55 0R, P580, P ...

  • Avaya Cajun P882 - page 553

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 16-21 Managing Intelligent Multica sting Table 16-8. IGMP Snooping Dialog Box Parameters Enabling IGMP Snooping You can enable IGMP snooping using either the Web Agent or the CLI. Using the Web Agent To enable IGMP Snooping using the Web Agent: 1. Select IGMP Snooping from th ...

  • Avaya Cajun P882 - page 554

    16-22 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 16 Using the CLI To enable IGMP Snooping using the CLI, enter the following command from Configure mod e: (configure)# set igmp-snooping enable Refer to the Command Reference Guide for the Avaya P55 0R, P580, P8 80, and P882 Multiservice Switches, v5.3.1 for d ...

  • Avaya Cajun P882 - page 555

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 16-23 Managing Intelligent Multica sting Figure 16-12. LGMP Server Configuration Dialog Box ...

  • Avaya Cajun P882 - page 556

    16-24 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 16 Table 16-9. LGMP Server Configuration Dialog Box Param eters Parame ter Definition Enable State Select to enable or disable LGMP server configuration. The d efault value is Disabled. Proxy Mode Select to enable or disable Proxy mode. Proxy mode allows the s ...

  • Avaya Cajun P882 - page 557

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 16-25 Managing Intelligent Multica sting Configuring the LGMP Server You can configure the LGMP server using either the Web Agent or the CLI. Using the Web Agent To configure the LGMP server using the Web Agent: 1. Select LGMP Server from the L2 > Intelligent Multicast gro ...

  • Avaya Cajun P882 - page 558

    16-26 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 16 2. Refer to Table to configure the LGMP Server Configuration dialog box parameters. 3. Click... — APPLY to save your changes. — CANCEL to restore previous settings. Using the CLI To configure the LGMP server using the CLI, enter the following command fr ...

  • Avaya Cajun P882 - page 559

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 16-27 Managing Intelligent Multica sting Viewing the LGMP Server Statistics per VLAN You can view the LGMP server statistics per VLAN using either the Web Agent or the CLI. Using the Web Agent To modify the LGMP server displa y per VLAN using the Web Agent: 1. Select LGMP Ser ...

  • Avaya Cajun P882 - page 560

    16-28 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 16 State Displays the current stat e of the LGMP server. • Distributor - Th e LGMP server serves LGMP messages to LGMP clients. • Non-Distributor - The LGMP server monitors the current distributor. LGMP Message Reception Statistics • Router Report - Disp ...

  • Avaya Cajun P882 - page 561

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 16-29 Managing Intelligent Multica sting 4. Click: — CLEAR to reset selected row information. — CLEAR ALL to reset all statistics. — REFRESH to view the latest information Using the CLI To view the LGMP server statistics per VLAN using the CLI, enter the following comma ...

  • Avaya Cajun P882 - page 562

    16-30 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 16 Figure 16-14. LGMP Client Configuration Dialog Box Table 16-11. LGMP Client Configuration Dialog Box Pa rameters Parameter Definition Enable State Select to enable or disa ble LGMP client. The default value is Disabled. LGMP Clients Displays the number of L ...

  • Avaya Cajun P882 - page 563

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 16-31 Managing Intelligent Multica sting Enabling the LGMP Client You can enable the LGMP client statistics using either the Web Agent or the CLI. Using the Web Agent To enable an LGMP client using the Web Agent: 1. Select LGMP Client from the L2 > Intelligent Multicast gr ...

  • Avaya Cajun P882 - page 564

    16-32 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 16 3. Select APPLY to complete the operatio n, or CANCEL to ignore the operation. Using the CLI To enable an LGMP client using the CLI, enter the following command from Configure mode: <configure># set lgmp client enable Refer to the Command Reference Gu ...

  • Avaya Cajun P882 - page 565

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 16-33 Managing Intelligent Multica sting Viewing LGMP Clients per VLAN statistics You can view LGMP clients per VLAN statistics using either the web agent or the CLI. Figure 16-15. LGMP Client Displa y per VLAN Dialog Box Table 16-12. LGMP Client Displa y per VLAN Dialog Box ...

  • Avaya Cajun P882 - page 566

    16-34 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 16 Using the Web Agent To view LGMP client statistics per VLAN using the Web Agent: 1. Select LGMP Client from the L2 > Intelligent Multicast group on the Web Agent window. The LGMP Client Configuration dialog box opens (Figure 16-14). 2. Select the n umber ...

  • Avaya Cajun P882 - page 567

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 16-35 Managing Intelligent Multica sting Managing CGMP Snooping You can manage Cisco Group Management Protocol (CGMP) snooping by using either the Web Agent or the CLI. This section provides the following procedures: ■ Enabling CGMP Snooping ■ Viewing CGMP Snooping Figure ...

  • Avaya Cajun P882 - page 568

    16-36 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 16 2. Refer to Table 16- 13 for an explanation of the CGMP Snooping dialog box parameters. 3. Click... — APPLY to save your changes — CANCEL to restore previous settings. Using the CLI To enable CGMP snooping using the CLI, enter the following command from ...

  • Avaya Cajun P882 - page 569

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 16-37 Managing Intelligent Multica sting Viewing CGMP Snooping You can view CGMP Snooping using either the web agent or the CLI. Using the Web Agent To view CGMP snooping using the Web Agent: 1. Select CGMP Snoopi ng from the L2 > Intelligent Multicast group on the Web Age ...

  • Avaya Cajun P882 - page 570

    16-38 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 16 ...

  • Avaya Cajun P882 - page 571

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 17-1 17 Monitoring the Avaya Multiservice Switch Overview The following information and procedures provided in this chapter pertain to layer 2 and layer 3 module configurations: ■ Interpreting Front Panel LED Displays ■ Checking Temperature Status and Configuring Thresh o ...

  • Avaya Cajun P882 - page 572

    17-2 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 17 Checking Temperature Status and Configuring Thresholds You can check the temperature status and configure temperature thresholds by using either the Web Agent or the CLI. * Note: The temperature thresholds have been raised for the backplane and slot 1. In hi ...

  • Avaya Cajun P882 - page 573

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 17-3 Monitoring the Avaya Mult ise rvice Switch Using the Web Agent To check the temperature sta tus and configure threshold s from the Web Agent: 1. Select T emperature system from the System > Configuration group on the Web Agent windows. The Temperature System dialog bo ...

  • Avaya Cajun P882 - page 574

    17-4 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 17 2. Refer to Table 17- 3 to se t the threshold values: Using the CLI To check the temperature status using the CLI, ente r the following command from Configuratio n mode: <configure># show temperature To Configure temperature threshold values using the ...

  • Avaya Cajun P882 - page 575

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 17-5 Monitoring the Avaya Mult ise rvice Switch Checking Active Alarms Each switch stores a table of ac tive alarms from which you can view a list of open issues without having to view the entire event log. This provides you with a quick snapshot of the switch’s health. Thi ...

  • Avaya Cajun P882 - page 576

    17-6 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 17 Figure 17-2. Active Alarm Table Dialog Box Using the CLI To view the Active Alarm Table using the CLI, enter the following command from Configuratio n mode: <configure># show alarms Refer to the Command Reference Guide for the Avaya P55 0R, P580, P8 80 ...

  • Avaya Cajun P882 - page 577

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 17-7 Monitoring the Avaya Mult ise rvice Switch — Toggling between the prim ary and redundant switch controller or switch element. — Full functioning of the redundant supervisor after a failure of the primary supervisor. Configuring the Protocol Event Log You can use the ...

  • Avaya Cajun P882 - page 578

    17-8 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 17 Figure 17-3. General Event Managem ent Dialog Box (3-Parts) ...

  • Avaya Cajun P882 - page 579

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 17-9 Monitoring the Avaya Mult ise rvice Switch ...

  • Avaya Cajun P882 - page 580

    17-10 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 17 2. Select one of the following from the ID column: — CLI — SNMP — RIP — OSPF — DVMRP — LDAP — AppleTalk — VRRP 3. Click APPLY to save your changes, or CANCEL to restore previous settings. 4. Select Protocol Events from the Events group on th ...

  • Avaya Cajun P882 - page 581

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 17-11 Monitoring the Avaya Mult ise rvice Switch Figure 17-4. Protocol Event Management Dialog Box 5. Refer to Table 17-4 to Configure the Protocol Event Management dialog bo x parameters for the specific protocols that you have Configured on your switch: Table 17-4. Protocol ...

  • Avaya Cajun P882 - page 582

    17-12 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 17 6. Click APPLY to save your changes, or CANCEL to restore previous settings. Using the CLI To configure the protocol event log using the CLI, enter the following command from Configuration mode: <configure># logging protocol event <protocol> Ref ...

  • Avaya Cajun P882 - page 583

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 17-13 Monitoring the Avaya Mult ise rvice Switch Figure 17-5. Event Log Search Dialog Box Figure 17-6. Event Log Search Dialog Box 2. Click the Severity Level checkbox in the Search By: column on either dialog box. 3. Select the severity level to filter on a particular severi ...

  • Avaya Cajun P882 - page 584

    17-14 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 17 Figure 17-7. Event Log Dialog Box 5. Refer to Table 17-5 for a explanation Event Log dialog box parameters: 6. Click... — SEARCH to view the event or shu tdown logs from either dialog box. — CANCEL to restore previous settings. — CLEAR EVENT LOG to cl ...

  • Avaya Cajun P882 - page 585

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 17-15 Monitoring the Avaya Mult ise rvice Switch Using the CLI To view the Event and Shutdown logs using the CLI, enter the following command from Configuration mode: <configure># show logging <num-events|shutdown|CR> * Note: Show logging CR will display the entir ...

  • Avaya Cajun P882 - page 586

    17-16 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 17 2. Refer to the Table 17-6 for an explanation on the Event Statistics window parameters. Viewing Event Statistics Using the CLI To view a specific number of event statistics using the CLI, ente r the following command from Configuration mode: <configure& ...

  • Avaya Cajun P882 - page 587

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 17-17 Monitoring the Avaya Mult ise rvice Switch 4. Refer to T able 17-7 for an exp lanation of the Event Log and Shutdown Log parameters on the General Event Management dialog box: 5. Refer to Table 17-8 for an explanation of the items listed in the Class column on the Gener ...

  • Avaya Cajun P882 - page 588

    17-18 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 17 6. Click APPLY to save your changes, or CANCEL to restore previous settings. Using the CLI To set log size using the CLI, en ter the following command from Configuration mode: <configure>#set logging history size <128, 512, 1024, 2048> Authentic ...

  • Avaya Cajun P882 - page 589

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 17-19 Monitoring the Avaya Mult ise rvice Switch Refer to the Command Reference Guide for the Avaya P550R, P580, P8 80, and P882 Multiservice Switches, v5.3.1 for details about these commands. Configuring Event Notification You can Configure event notification usi ng either t ...

  • Avaya Cajun P882 - page 590

    17-20 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 17 ...

  • Avaya Cajun P882 - page 591

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 18-1 18 Monitoring and Configuring the Forwarding Cache Overview The information and procedures prov ided in this chapter pertain to layer 3 module configuration only: ■ Configuring the Forwarding Cache ■ Displaying Frame Forwarding Statistics ■ Displaying and Searching ...

  • Avaya Cajun P882 - page 592

    18-2 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 18 Figure 18-1. Layer-3 Forwardin g Cache Configuratio n Dialog Box 2. Configure the Layer 3 Forwarding Cache co nfiguration parameters. Refer to Table 18-1 for an explanation of the Layer-3 Forwarding Cache Config uration dialog box parameters for tree configu ...

  • Avaya Cajun P882 - page 593

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 18-3 Monitoring and Co nfiguring the Forward ing Cache 3. Click: — APPLY to save your changes — CANCEL to restore previous settings — REFRESH to update your system configuration — CLEAR to reset all configuratio n parameters to zero. CLI Command To configure the f orw ...

  • Avaya Cajun P882 - page 594

    18-4 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 18 <configure># ipx route-cache <options> * Note: There is no CLI command to clear the L3 FE cache. Refer to the Command Reference Guide for the Avaya P55 0R, P580, P8 80, and P882 Multiservice Switches, v5.3.1 for details about these commands. Moni ...

  • Avaya Cajun P882 - page 595

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 18-5 Monitoring and Co nfiguring the Forward ing Cache 2. Refer to Table 18-2 for an explana tion for the Frame Forwarding Statistics dialog box parameters Refer to the Command Reference Guide for the Avaya P550R, P580, P8 80, and P882 Multiservice Switches, v5.3.1 for detail ...

  • Avaya Cajun P882 - page 596

    18-6 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 18 Displaying and Searching the L3 Forwarding Cache for an Entry Web Agent Procedure You can display and search the Layer 3 Forwarding Cache for an entry using the web agent, To display the contents of the L3 forwarding Cache, you can use the search function to ...

  • Avaya Cajun P882 - page 597

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 18-7 Monitoring and Co nfiguring the Forward ing Cache For example, if you want to find all entries in the Forwarding Cache by a VLAN, you would select the VLAN from the Search By column, and select the appropriate VLAN from the pull-down menu.Figure 18-4 is the actual displa ...

  • Avaya Cajun P882 - page 598

    18-8 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 18 Figure 18-4. Forwarding Cache Search by VLAN CLI Command To display the L3 Forwarding Cach e ca che using the CLI, enter one of the following commands from configure mode for the specific routing cache: <configure># show ip unicast cache <configure& ...

  • Avaya Cajun P882 - page 599

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 18-9 Monitoring and Co nfiguring the Forward ing Cache Figure 18-5. Active FE Cache Dialog Box 3. To modify your FE Cache table, do one of the foll owing: — Select the entry and click Flush Entry to delete one or more entries — Click Flush Tabl e to clear the entire table ...

  • Avaya Cajun P882 - page 600

    18-10 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 18 4. Refer to Table 18-4 for an explanation of the FE Cache dialog box fields: Table 18-4. FE Cache Di alog Box Fields Parame ter Defines... Fabric/Chip Index The Pack et Routing E n gine in que stion. Type The type of packet (for example, IP uni cast, IP mul ...

  • Avaya Cajun P882 - page 601

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 19-1 19 Analyzing Network Performance By Using RMON and Ethernet Statistics Overview The following information and procedures provided in this chapter pertain to layer 2 and layer 3 module configurations: ■ Viewing Network Statistics ■ Setting Up Port Mirroring ■ Enabli ...

  • Avaya Cajun P882 - page 602

    19-2 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 19 Figure 19-1. Module Statistics Web page 2. Select Clear Counte rs to get a fresh view of the statistics being gathered. This resets all of the counters to zero, so that you can track the counters from a specific point fo rward. 3. Select a module from the Mo ...

  • Avaya Cajun P882 - page 603

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 19-3 Analyzing Network Performan c e By Using RMON and Ethernet Statis tics 4. Click Clear Counters to get a fresh view of the statistics being gathered. This resets all of the counters to zero so that you can track the counters from a particular point forward. 5. Select a po ...

  • Avaya Cajun P882 - page 604

    19-4 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 19 7. Refer to Table 19-1 for an explanation of the Ethernet Interface Statistics Web page fields: Table 19-1. Ethernet Interfa ce Statistics Web Page Fields Statistic Indicates Actions Sample The sample number. N/A Interval Start The date and time this log ent ...

  • Avaya Cajun P882 - page 605

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 19-5 Analyzing Network Performan c e By Using RMON and Ethernet Statis tics Multicasts Normal d uring n etwork operation. For example, multicast packets are to send target video streams to selected stations on the network, and are part of th e operation of the Spanning Tree P ...

  • Avaya Cajun P882 - page 606

    19-6 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 19 Undersized Packets Count of packets with a valid CRC that violate the minimum Ethernet packet size. These malformed packets are most often the resu lt of soft ware errors. Possible cause: Device or application creating non- compliant packets. Possible action ...

  • Avaya Cajun P882 - page 607

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 19-7 Analyzing Network Performan c e By Using RMON and Ethernet Statis tics CLI Command To view network statistics using the CLI, enter the following command in Privileged mode: <configure># show ethernet counters <cr|mod- num|mod-swport-spec> Refer to the Command ...

  • Avaya Cajun P882 - page 608

    19-8 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 19 Setting Up Port Mirroring Configuring an RMON mirror port allows you to mirror traffic from a port or set of ports to a specific mirror port, where you can attach a sniffer or RMON probe. The switch supports a single mirror port and a single source port for ...

  • Avaya Cajun P882 - page 609

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 19-9 Analyzing Network Performan c e By Using RMON and Ethernet Statis tics Setting Up a Port Mirror on a Switch in Fabric Mode 1 You can set up a port mirror on a switch in Fabric Mode 1 by using either the Web Agent, the CLI, or SNMP. Fabric mode 1 port mirroring work s wit ...

  • Avaya Cajun P882 - page 610

    19-10 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 19 3. Select a source port for traffic from the Configure Source column. The Port Mirroring Configuration Web page opens (Figure 19-5). Figure 19-5. Port Mirroring Configuration Web page 4. Refer to Table 19-3 for an explanation of the fields on the Port Mirro ...

  • Avaya Cajun P882 - page 611

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 19-11 Analyzing Network Performan c e By Using RMON and Ethernet Statis tics Mirror Port Displays the port from which you wa nt to send the traffic. This p ort can be on another module in t he switch. Once a specif ic port associated wi th a fabric port has been de signated a ...

  • Avaya Cajun P882 - page 612

    19-12 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 19 Piggyback Port Port used to enable bi-directional port mirr or ing. If no piggyba ck port is specified , only received traffic f rom the source port w ill go to the mirro r port. The piggyback port should hav e the same bandwidth as the source port. Only on ...

  • Avaya Cajun P882 - page 613

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 19-13 Analyzing Network Performan c e By Using RMON and Ethernet Statis tics CLI Command To set up an RMON mirror port by using the CLI, enter the following command from Enable/Configure mode: <configure># set port mirror <mod-port-range> Refer to the Command Refe ...

  • Avaya Cajun P882 - page 614

    19-14 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 19 limited. This is because packets are dropped during th e bandwidth limiting process. Since both source and mirror packets are subject to drop, and because packets are dropped at random, if packets are dropped from either the source or the mirror traffic (or ...

  • Avaya Cajun P882 - page 615

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 19-15 Analyzing Network Performan c e By Using RMON and Ethernet Statis tics See Table 19-4, for the specific port ranges that you can mirror on each type of module. Table 19-4. Port Ranges for Fabric Mode 2 Port Mirroring Module Port ranges that you can mirror 4-port gigabit ...

  • Avaya Cajun P882 - page 616

    19-16 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 19 3. Select the Channel and the associated port from the Source Port column pull-down menu. 4. In the Mirror Port column pull-down menu, select the port to which you want to mirror traffic. Both the source port and mirror port must either: — Be on the same ...

  • Avaya Cajun P882 - page 617

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 19-17 Analyzing Network Performan c e By Using RMON and Ethernet Statis tics 6. In the Sampler Type column, select how often you want the mirror port to rece ive traffic samples. 7. Do one of the following: 8. If you selected Both/DA Filter in the Direction/Filter field, ente ...

  • Avaya Cajun P882 - page 618

    19-18 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 19 Direction/Filter The direction of t raffic that you want to mirror and the filter that you wa nt to set up, if any. Options are: • Receive/None -Mirrors all receive traffic. • Transmit/None -Mirrors all transmit traffic. • Both/None -Mirrors all trans ...

  • Avaya Cajun P882 - page 619

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 19-19 Analyzing Network Performan c e By Using RMON and Ethernet Statis tics CLI Command Use the following CLI commands to configure Fabric mode 2 port mirroring. You must be in Global Configuration command mo de to enter these commands. * Note: For information on how to ente ...

  • Avaya Cajun P882 - page 620

    19-20 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 19 CLI Command To remove a port mirror from a swit ch in Fabric mode 2, use the following CLI command from configure mode: <configure># clear port mirror Fab ric_mode2 channel <channel> For more information about this command see “set port mirror ...

  • Avaya Cajun P882 - page 621

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 19-21 Analyzing Network Performan c e By Using RMON and Ethernet Statis tics We recommend that you check any ports to be used in port mirroring to ensure that the ports are active. To use SNMP to set up port mirroring: 1. Use the MIB objects that are listed in Table 19-6 to s ...

  • Avaya Cajun P882 - page 622

    19-22 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 19 4. Use the MIB object that is listed in Table 19-9 to specify the maximum number of packets per second that you want t he mirror port to receive. Removing Port Mirroring To use SNMP to remove port mirroring, use the MIB object that is listed in Table 19-10. ...

  • Avaya Cajun P882 - page 623

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 19-23 Analyzing Network Performan c e By Using RMON and Ethernet Statis tics Enabling MAC Address Lock and Traps for Unknown Source Addresses To enable traps for unknown source addresses, you must first enable the MAC Address Lock feature. Yo u can enable this feature and tra ...

  • Avaya Cajun P882 - page 624

    19-24 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 19 CLI Commands To use the CLI to enable the MAC Address Lock feature and traps for unknown source addresses: 1. Enter Global Configuration mode. The CLI displays the <configure># prompt . 2. Use the following command to manually add the “permitted” ...

  • Avaya Cajun P882 - page 625

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 19-25 Analyzing Network Performan c e By Using RMON and Ethernet Statis tics 2. Use the MIB object that is lis ted in Table 19-13 to disable learning on a port. 3. Use the MIB object that is listed in Table 19-14 to enable known mode on a port. 4. Use the MIB object that is l ...

  • Avaya Cajun P882 - page 626

    19-26 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 19 ...

  • Avaya Cajun P882 - page 627

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 20-1 20 Managing Buffers and Queues on 50-Series Modules Overview The following information and procedures provided in this chapter pertain to layer 2 and layer 3 module configurations. Buffer management features help you to optimize traffic throughput through the switch fabr ...

  • Avaya Cajun P882 - page 628

    20-2 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 20 ports is 1023 to 1. If there is traf fic to be serviced from both the high- and normal-priority queues, 999 packets of high-priority traffic will be processed for each normal-priority packet. When the high-priority queue fills up, incoming frames are dropped ...

  • Avaya Cajun P882 - page 629

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 20-3 Managing Buffers and Queues on 50 -Series Modules Figure 20-1. Module Information Dialog Box 2. Select the module whose buffe rs you want to manage from the Select column. 3. Select the Module number for th at module from the Buffer Management column. The Buffer Manageme ...

  • Avaya Cajun P882 - page 630

    20-4 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 20 4. Refer to Table 4 for an explanation of the Buffer Management dialog box parameters. 5. Select the Fabric Port Buffer number whose associated buffers you want to manage. The Buffer Detail Configuration dialog box for that fabric port opens (Figure 20-3). T ...

  • Avaya Cajun P882 - page 631

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 20-5 Managing Buffers and Queues on 50 -Series Modules Figure 20-3. Buffer Detail Configurati on Dialog Box 6. Refer to Table 20-2 for an explanation of the Buffer Detail Configuration dialog box input and output fields: Table 20-2. Buffer Detail Configuration Dia log Box Par ...

  • Avaya Cajun P882 - page 632

    20-6 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 20 High Priority Allocation Displays the percent of the bu ffer’s queuing space allotted to high p riority traff ic. Beca use the high-priorit y queue is serviced more frequently than the normal priority queue, raising this value may not necessarily provide b ...

  • Avaya Cajun P882 - page 633

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 20-7 Managing Buffers and Queues on 50 -Series Modules 7. Repeat Steps 1-4 to tune Physical Port (Fast Ethernet) buffers. Physical Port ports have additional buffers on both the input and output ports. 8. Click APPLY to save your changes, or CANCEL to restore previous setting ...

  • Avaya Cajun P882 - page 634

    20-8 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 20 ...

  • Avaya Cajun P882 - page 635

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 21-1 21 80-Series QoS Overview Quality of Service (QoS) is a set of tools that make it possible for you to manage traffic across a switch or a network. These tools protect specific traffic from the effect s of network congestion. You can enable these featu res for a module or ...

  • Avaya Cajun P882 - page 636

    21-2 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 21 Why implement QoS? Purpose of QoS In a network that has time-sensiti ve traffic (VoIP) or bandwidth- intensive traffic (real-time or near-real-time streaming-video), QoS makes it possible for you to prioriti ze the time-sensitive traffic and assign larger am ...

  • Avaya Cajun P882 - page 637

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 21-3 80-Series QoS How Does QoS Work? The QoS process starts at the point where a frame enters the switch and ends when the frame exits the switch. This section describe s the QoS process from start to finish. QoS Process for Ingress Traffic Process The QoS process for ingres ...

  • Avaya Cajun P882 - page 638

    21-4 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 21 2. Storing the frame or pack et in one of eight ing ress queues. The switch stores the fram e or pa cket in the queue that matches the priority that was identified in Step 1. 3. Forwarding the frame or packet from the ingress queue to its destination. If you ...

  • Avaya Cajun P882 - page 639

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 21-5 80-Series QoS 2. Forwarding the frame or packet from the queue to the egress port for transmission. The switch uses algorithm s that allocate bandwidth among the egress queues to forward the traffic in the queues. Th e Avaya Multiservice switch so ftware supports the fol ...

  • Avaya Cajun P882 - page 640

    21-6 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 21 Diagram of QoS Process Figure 21-1 illustrates the QoS process from when a frame enters the switch to when the frame exits the switch. Figure 21-1. QoS Process !! Frame is forwarded from ingress priority queue to egress port. NOTE: If polici ng is enabled, t ...

  • Avaya Cajun P882 - page 641

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 21-7 80-Series QoS Classification of Traffic The switch assigns traff ic to one of eight queu es according to the priority, or “class,” of the traffic. Priorities range 0 to 7, 7 being the highest priority. You can set the switch to classify traffic by the priority assign ...

  • Avaya Cajun P882 - page 642

    21-8 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 21 However, the priority of the 802.1 tag and Cisco ISL tag take precedence over the prio rity of the physical port, so the switch uses the priority of the physical port only if: ■ No tags are present in the frame or ■ You have set the physical port to igno ...

  • Avaya Cajun P882 - page 643

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 21-9 80-Series QoS ■ Replace the existing DSCP wi th a DSCP that you specify ■ Use the layer 2 priority You can specify the TCP/IP traffic that yo u want the ru le to apply to. The rule can apply to traffic with a specific: ■ IP destination address ■ IP source address ...

  • Avaya Cajun P882 - page 644

    21-10 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 21 All packets that have a source IP address in the 10.10.60 subnet are assigned a priority of 1(fwd x is 1 based, but priorities are 0 based.) All packets that have a source IP address in the 10.10.70 subnet are assigned a priority of 3, and so on. Any packet ...

  • Avaya Cajun P882 - page 645

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 21-11 80-Series QoS Precedence of Priorities If multiple priorities are associ ated with a frame or packet, the switch classifies the fram e or packet according to t he priority of highest precedence. See Table 21-2 for the precedence of each priority. The switch then assigns ...

  • Avaya Cajun P882 - page 646

    21-12 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 21 Supported Number of Queues Table 21-3 specifies the number of ingress and egress queues th at are available on each module . Table 21-3. Modules and Available Queues Module Ingress Queues Egress Queues 4-port gigabit modules 1 set of 8 queues per port Total ...

  • Avaya Cajun P882 - page 647

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 21-13 80-Series QoS Setting the Priority of a Physical Port Command Use the set port default-priority command to set the priority of a physical port. Each physical port has a default priority of 3. The syntax of the command is: Avaya(configure)#set por t default-priority {{ & ...

  • Avaya Cajun P882 - page 648

    21-14 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 21 Examples Setting a Physical Port to Ignore Tag Priority Command Use the set port ignore-tag priority command to set a port to ignore any layer 2 tag priority (including 802.1p tags). The syntax of the command is: Avaya(configure)#set port ignore-tag-priorit ...

  • Avaya Cajun P882 - page 649

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 21-15 80-Series QoS Examples <mod-swport-range> The slot number of a module, and, either a port number, or a range of port numbers having the format Px-Py . For example: • To specify po rt 1 on the modu le in slot 3, enter 3/1 . • To specify ports 1 through 5 on the ...

  • Avaya Cajun P882 - page 650

    21-16 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 21 Setting the Priority of a MAC Address Command Use the set aft entry command to set the prio rity of a source MAC address or destination MAC address. The syntax of the command is: Avaya(configure)#set a ft entry <mac-address> vlan { <vlan-id> | n ...

  • Avaya Cajun P882 - page 651

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 21-17 80-Series QoS For definitions of all other keywords, arguments, and options in this command, see “set aft e ntry” in Chapter 2, “AFT,” of Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, Version 5.3.1. Examples da-priority ...

  • Avaya Cajun P882 - page 652

    21-18 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 21 Displaying the Priority of a MAC Address Command Use the show aft entry command to display th e priority of a source MAC address or destination MAC address. The syntax of the command is: Avaya>show aft entry [mac <wildcard-mac-address> ] [VLAN { &l ...

  • Avaya Cajun P882 - page 653

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 21-19 80-Series QoS Setting a Physical Port to Use DiffServ Command Use the set port use-diffs erv command to set a port to classify bridged IP traffic by its DiffServ code point (DSCP). The syntax for the command is: Avaya(configure)#set port use-diffserv {{ <mod-num> ...

  • Avaya Cajun P882 - page 654

    21-20 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 21 Setting a Physical Port to Mask DiffServ Bits Command Use the set port mask-d iffserv command to mask the three least significant bits of the DSCP when the switch is using the DSCP to classify bridged IP traffi c. If you mask the th ree least significant bi ...

  • Avaya Cajun P882 - page 655

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 21-21 80-Series QoS Example To set all ports on the module in slot 3 to mask the three least significant bits of the DSCP, enter: set port mask-di ffserv 3 on Assigning a Priority to a DSCP Command Use the set diffserv priority command to assign a priority to a DiffServ code ...

  • Avaya Cajun P882 - page 656

    21-22 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 21 Displaying the DiffServ Table Command Use the show diffserv table command to display the priority that is assigned to each DSCP. The syntax of the command is: Avaya>show diffserv table * Note: The show diffserv table CLI command displays the packet loss ...

  • Avaya Cajun P882 - page 657

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 21-23 80-Series QoS For more information about this command, see Chapter 21, “Port,” in the Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, Version 5.3.1 . Setting Up an ACL Rule Command Use the access list command to set a rule in ...

  • Avaya Cajun P882 - page 658

    21-24 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 21 <source-wildcard> | any | host <sou rce-ip-addr> } [{lt <port> | eq <port> | gt <port> | range <port> <port> }] { <dest-ip-addr> <dest- wildcard> | any | host <dest-ip-addr> } [{lt <port> | e ...

  • Avaya Cajun P882 - page 659

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 21-25 80-Series QoS use-l2 Classifies traffic by the layer 2 priority of the packet. If you enter use-l2 , the switch ignores the ACL rule priority and DiffServ priority. deny Blocks the packet. fwd1 | fwd2 | fwd3 | fwd4 | fwd5 | fwd6 | fwd7 | fwd8 The priority that you want ...

  • Avaya Cajun P882 - page 660

    21-26 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 21 * Note: You must use the CLI to set up ACLs for QoS. Do not attempt to use the IP Access Co ntrol Web page in the Web Agent to set up ACLs for QoS. [{lt <port> | eq <port> | gt <port> | range <port> <port> }] A source port or r ...

  • Avaya Cajun P882 - page 661

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 21-27 80-Series QoS Examples: Standard ACL Rules Table 21-15. Examples: Standard ACL Rules To... Enter... • Use the DSCP in the packet to classify all traffic that has a source IP address in the 10 .10.60 subne t. • Mask the three least significant bits of the DSCP. acces ...

  • Avaya Cajun P882 - page 662

    21-28 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 21 Examples: Extended ACL Rules Table 21-16. Examples: Extended ACL Rules To... Enter... Use the DSCP in the packet to classify all traffic that has a: • Source IP address of 199.93.23 9.168 • Destination address in the 1. 1.1 subne t access-list My AcessL ...

  • Avaya Cajun P882 - page 663

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 21-29 80-Series QoS Assign a priority of 6 to all TC P traffic that has a: • Source IP address in the 10. 10.10 subne t • Destination IP address in the 11.11.11 subn et • Destination port of 1 access-list MyAccessL ist2 6 permit use-priority 6 tcp 10.10.10. 0 0.0.0.255 ...

  • Avaya Cajun P882 - page 664

    21-30 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 21 Setting Up a Default ACL Rule Command Use the any keyword in the access list command to set up a default ACL rule. The rule will be applied to all packets on the switch that do not match any other ACL rules. The command syntax is: Avaya(configure)#acc ess-l ...

  • Avaya Cajun P882 - page 665

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 21-31 80-Series QoS Displaying ACL Rules Command Use the show access-lists command to display the ACL rules i n an ACL. The syntax of this command is: Avaya>show access-lists [ <access-list-name> ] For more information on this comm and, see Chapter 20, “Policy,” ...

  • Avaya Cajun P882 - page 666

    21-32 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 21 source port or mirror port are dropped, the mirror traffic may not match the source traffic. Setting Up Policing Use the set port police command to enable or disable policing for ingress traffic on a port. For information on how policing works, see “ Ingr ...

  • Avaya Cajun P882 - page 667

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 21-33 80-Series QoS <rate> The maximum bits per seco nd that you want to assign to the queue. For Fabric mode 1, enter: • 0 to disable the queue Or • 220 Kbps to 1.5 Gbps For Fabric mode 2, enter: • 0 to disable the queue Or • 270 Kbps to 1.5 Gbps <normal-bur ...

  • Avaya Cajun P882 - page 668

    21-34 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 21 Displaying the Policing Settings Use the show port police command to display the settings for policing. For information on how policing works, see “ Ingress Policing” on page 31. The syntax for this command is: Avaya>show port police { <mod-num> ...

  • Avaya Cajun P882 - page 669

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 21-35 80-Series QoS Queue-Servicing Algorithms The following queue-servicing algorithms are available f or egress queues: ■ Weighted fair queueing (WFQ) ■ Strict Priority ■ Class-based queueing (CBQ) ■ Class-based weighted fair queueing (CBWFQ) * Note: In earlier vers ...

  • Avaya Cajun P882 - page 670

    21-36 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 21 For information on how to set up WFQ, see “ Setting Up WFQ” on page 39. Example Suppose that the accumula ted weight of all queues is set a t their weight increments. 1. The switch service s queue 7 because its accumulated weight is 128. 2. The accumula ...

  • Avaya Cajun P882 - page 671

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 21-37 80-Series QoS before the switch services queue 5. Queue 5 must be em pty before the switch services queue 4, and so on. For information on how to set up strict priority queueing, see “ Setting Up Strict Priority Queueing” on page 40. CBQ With the class-based queuing ...

  • Avaya Cajun P882 - page 672

    21-38 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 21 * Note: Avaya recommends that yo u do not set a port using CBWFQ as the source port or mirror port for a port mirror. When the switch limi ts the bandwidth of a port, packets are subject to random drop. If packets from a source port or mirror port are dropp ...

  • Avaya Cajun P882 - page 673

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 21-39 80-Series QoS Setting Up WFQ Use the set port queue servic e wfq command to set a port, port range, or module to use weighted fair queueing (WFQ) queue servicing. WFQ is the default queue-servicing algorithm. The syntax of the command is: Avaya(configure)#set port queue ...

  • Avaya Cajun P882 - page 674

    21-40 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 21 Setting Up Strict Priority Queueing Command Use the set port queue service str ict-priority co mmand to set a port, port range, or module to us e strict priority queue servicing. The syntax of the command is: Avaya(configure)#set port queue ser vice {{ < ...

  • Avaya Cajun P882 - page 675

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 21-41 80-Series QoS Setting Up CBQ Use the set port queue servic e cbq command to set a port, port range, or module to use class-based queuing (CBQ) queue servicing. The syntax of the command is: Avaya(configure)# set port queue service {{ <mod-num> | <mod- swport-ra ...

  • Avaya Cajun P882 - page 676

    21-42 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 21 For information about how the CBQ queue-servicing algorithm works, see “ CBQ” on page 37. Setting Up CBWFQ Use the set port queue service cbwfq command to set a port, port range, or module to use class-based weighted fair queuing (CBWF Q) queue servicin ...

  • Avaya Cajun P882 - page 677

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 21-43 80-Series QoS <mod-swport-range> The slot number of a module, and, either a port number, or a range of port numbers having the format Px-Py . For example: • To specify po rt 1 on the modu le in slot 3, enter 3/1 . • To specify ports 1 through 5 on the module i ...

  • Avaya Cajun P882 - page 678

    21-44 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 21 <normal-burs t> The maximum size of burst t hat is guaranteed transfer . Bursts that are smaller than this size are g uaranteed transfer . Bursts that ar e larger th an this size are either serviced by W FQ or dropped (whichever actio n that you speci ...

  • Avaya Cajun P882 - page 679

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 21-45 80-Series QoS For information about how CBWFQ works, see “ CBWFQ” on page 37. * Note: The switch does not drop packets on egress queue 7, even if you specify the drop keyword. This restriction ensures that traffic management packets are not discarded by the bandwidt ...

  • Avaya Cajun P882 - page 680

    21-46 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 21 Displaying the Queue-Service Settings Command Use the show port queue service command to display the settings for queue servicing. The syntax for this command is: Avaya>show port queue service { <mod-num> | <mod-swport- range> } [..., { <m ...

  • Avaya Cajun P882 - page 681

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 21-47 80-Series QoS QoS Statistics You can display QoS statistics for: ■ All ports on a module ■ A port or port range ■ A specific queue on a port, port range, or module Two sets of statistics are displayed for egress queues: port statistics and queue statistics. Fo r i ...

  • Avaya Cajun P882 - page 682

    21-48 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 21 Threshold (% Full) The threshold for queue capacity that determines whether additional frames are counted toward Frames Enqueued Above Threshold or Frames Enqueued Below Threshold . If the number of f rames in the qu eue exceeds this percentage of the queue ...

  • Avaya Cajun P882 - page 683

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 21-49 80-Series QoS Egress Port Statistics for 10/ 100 Modules The egress port statistics for 10/100 modules are reported per 12 ports, not for individual physical ports. For example, if you display the QoS statistics for port 20 on a 10/100 mod ule, the port statistics that ...

  • Avaya Cajun P882 - page 684

    21-50 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 21 Table 21-28 lists the statistics that the switch displays for ports on 10/100 modules. Egress Port Statistics for Gigabit Modules The egress port statistics for gigabit modules are reported per individual port. Table 21-29 lists the statistics that the swit ...

  • Avaya Cajun P882 - page 685

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 21-51 80-Series QoS Buffer Statistics for Egress Queues You can also display the amount of memory that is all ocated to each egress queue. The allocated am ount of memory is displayed in both the number of buffers and the number of bytes. Buffers are 128-byte units of memory ...

  • Avaya Cajun P882 - page 686

    21-52 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 21 Table 21-30 lists the buffer statistics that you can display for egress queues. These settings are determined by the switch. You can display them but not change them. Table 21-30. Buffer Statistics for Egress Queues Statistic Explanation Total Queue Memory ...

  • Avaya Cajun P882 - page 687

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 21-53 80-Series QoS Displaying QoS Statistics Use the show port queue counters to display QoS statistics. The syntax of this command is: Avaya> show port queue counters { <mod-num> | <mod-swport- range> } [..., { <mod-num> | <mod-swport-range> }] {i ...

  • Avaya Cajun P882 - page 688

    21-54 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 21 Resetting the QoS Statistics Use the reset port queue counter s to reset the queue statistics to 0. The syntax of the command is: Avaya> reset port queue counter s { <mod-num> | <mod-swport- range> } [..., { <mod-num> | <mod-swport-r ...

  • Avaya Cajun P882 - page 689

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 21-55 80-Series QoS Displaying the Buffer Settings for Egress Queues Use the show port queue buffer command to display the amount of memory that is assigned to each queue. The syntax of the command is: Avaya (configure)#sho w port queue buffer {{ <mod-num> | <mod- sw ...

  • Avaya Cajun P882 - page 690

    21-56 Avaya P550R, P580, P880, an d P882 Mu l tiservice Switch User Guide, v5.3.1 Chapter 21 ...

  • Avaya Cajun P882 - page 691

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 A-1 A Upgrading the Application Software Overview Upgrading the switch software involves the following steps: 1. Backing Up the Current Software 2. Backing Up the Previous Configuration 3. Downloading Application Software 4. Setting the Startup Image 5. Synchronizing the Acti ...

  • Avaya Cajun P882 - page 692

    Appendix A A-2 Avaya P550R, P580, P880, and P882 Mu ltiservice Switch User Guide, v5.3.1 Backing Up the Current Software The Avaya Multiservice switches have two memory locations for storing the embedded switch software: APP1 and APP2. These two memory locations make it possible to store the current software in one APP location and download the new ...

  • Avaya Cajun P882 - page 693

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 A-3 Upgrading the Application Software 3. When you download the new switch software, download it to the other APP memory location. For example, in Figure A-2, you would download the new software to APP2. CLI Command To determine the APP location from which the switch loads th ...

  • Avaya Cajun P882 - page 694

    Appendix A A-4 Avaya P550R, P580, P880, and P882 Mu ltiservice Switch User Guide, v5.3.1 Figure A-3. Configuration File Management Web page 3. In the Save Running-Config to Startup-Config field, select Save . 4. In the Copy Source field, select Startup-Config . * Note: The Source File name may be left u nspecified 5. In the Copy Destination field, ...

  • Avaya Cajun P882 - page 695

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 A-5 Upgrading the Application Software Downloading Application Software You can download new application so ftware from a T FTP server to an APP memory location by using either the Web agent or the CLI. Web Agent Procedure To download new application soft ware from a TFTP ser ...

  • Avaya Cajun P882 - page 696

    Appendix A A-6 Avaya P550R, P580, P880, and P882 Mu ltiservice Switch User Guide, v5.3.1 4. In the File Na me field, enter one of the following: — m5500r_v5.03.01.bin to download version 5.3. 1 for the P550R switch (layer 3) — m8000r_v5.03.01.bin to download version 5.3. 1 for the P580 switch (layer 3) — m8800_v5.03.01.bin to download version ...

  • Avaya Cajun P882 - page 697

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 A-7 Upgrading the Application Software 2. Select FEPROM . The FEPROM Contents Web page is displayed in the content pane (Figure A-2). 3. In the Power Up/Reset Image field, select the APP location to which you downloaded the new application software. 4. Select APPLY . CLI Comm ...

  • Avaya Cajun P882 - page 698

    Appendix A A-8 Avaya P550R, P580, P880, and P882 Mu ltiservice Switch User Guide, v5.3.1 CAUTION When making configuration changes to the switch you must save the changes you made by copying the running configuration file to the startup configuration file. This ensures that the changes persist after the switch is restarted. When your switch is conf ...

  • Avaya Cajun P882 - page 699

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 A-9 Upgrading the Application Software Figure A-5. System Reset Web Page 3. Select Yes in response to the question, Do you want to reset the switch? The switch resets and loads the new application software. CLI Command To reset the switch after downloadi ng new application so ...

  • Avaya Cajun P882 - page 700

    Appendix A A-10 Avaya P550R, P580, P880 , and P882 Multiservice Switch User Guide, v5.3.1 Web Agent Procedure To reset the Active Supervisor to the Standby Supervisor: 1. In the navigation pane, expand the System fol der. 2. Select System Reset . The System Reset Web page is displayed in the content pane (Figure A-3). 3. Select Yes in response to t ...

  • Avaya Cajun P882 - page 701

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 A-1 1 Upgrading the Application Software 3. Download the application software. For information on how to perform thi s step, see “Downloading Application Software” on page A-5. The following error message is displayed after you download v5. x . Disregard it. ERROR: Bad fi ...

  • Avaya Cajun P882 - page 702

    Appendix A A-12 Avaya P550R, P580, P880 , and P882 Multiservice Switch User Guide, v5.3.1 4. Use the CLI command to statical ly bind the VLANs to every port that you want to assign to a hunt group. * Note: For the appropriate CLI command to use, refer to the CLI Reference Guide. 5. Assign the ports to hunt groups. 6. Save the running configuration ...

  • Avaya Cajun P882 - page 703

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 B-1 B Boot Mode Boot Mode is a special mode for the Avaya P550R/P580/P880/P882 Multiservice switch. Boot mode is used to: ■ Recover your password ■ Download new operational code Accessing BOOT Mode You can access BOOT mode during Power Up or when both operational images i ...

  • Avaya Cajun P882 - page 704

    Appendix B B-2 Avaya P550R, P580, P880, and P882 Mu ltiservice Switch User Guide, v5.3.1 Starting up threads ... Periodic Task Network Interface Front Panel Display Download Command Line Parser Boot process complete - system is now operational. Boot Software Revision: V5.3 Press Ctrl-P for previous command, Ct rl-N for next command download Downloa ...

  • Avaya Cajun P882 - page 705

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 B-3 Boot Mode gateway) to the ethernet console port prior to attempting the TFTP download of a new operational image. 1. Ensure the ethernet console port is connected to the network for a TFTP transfer. 2. Enter the following command to assign an IP address to the ethernet co ...

  • Avaya Cajun P882 - page 706

    Appendix B B-4 Avaya P550R, P580, P880, and P882 Mu ltiservice Switch User Guide, v5.3.1 ...

  • Avaya Cajun P882 - page 707

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 C-1 C Supported MIB Groups The following section lists, by protocol, public and private MIBs supported by the Avaya P5 50R, P580, P880, and P88 2 Multiservice switches. General Private MIBs The following general private M IBs are supported: ■ Avayacjnroot.mib ■ Avayagen.m ...

  • Avaya Cajun P882 - page 708

    Appendix C C-2 Avaya P550R, P580, P880, and P882 Mu ltiservice Switch User Guide, v5.3.1 IEEE 802.3 Statistics Group RFC 1398 is supported. Bridge MIB RFC 1493 is supported. SNMPv2 RFC 1907 is supported. RMON RFC 1757 is supported. RMON2 MIB The standard MIB RFC 2021 is supported for Trap Destination Table. SMON The standard MIB RFC 2613 is support ...

  • Avaya Cajun P882 - page 709

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 C-3 Supported MIB Groups VRRP Standard MIB The current draft of the Virtual Redundancy Router Protocol (VRRP) MIB is supported: draft-ietf-vrrp-mib-04.mib. Private MIB The private MIB cjniplrrp.mib is supported. IGMP Standard MIB The current draft of the Internet Group Member ...

  • Avaya Cajun P882 - page 710

    Appendix C C-4 Avaya P550R, P580, P880, and P882 Mu ltiservice Switch User Guide, v5.3.1 IP Forwarding/Route Table Standard MIB RFC 2096 is supported. Private MIB The private MIB l3fwd.mib is supported. DVMRP Standard MIB The current draft of the DVMRP MIB is supported: draft-thaler- dvmrp-mib-9.mib. Private MIB The private MIB cjndvmrp.mib is supp ...

  • Avaya Cajun P882 - page 711

    Avaya P550R, P580, P880, and P882 Multis ervice Switch User Guide, v5.3.1 D-1 D FCC Notice FCC Notice — Class A Computing Device : This equipment generates, uses, and m ay emit radio frequency energy. The equipment has bee n type tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC rules, which are de ...

  • Avaya Cajun P882 - page 712

    Appendix D D-2 Avaya P550R, P580, P880, and P882 Mu ltiservice Switch User Guide, v5.3.1 Avertissem ent! Cet appareil est un appareil de Classe A. Dans un environnement résidentiel cet appareil peut provoquer des brouillages radioélectriques. Dans ce cas, il peut être demandé à l'u tilisateur de prendre les mesures appropriées. ...

  • Avaya Cajun P882 - page 713

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 Index-1 Index Numerics 10/100 port auto negotiation speed/ dupl ex advertisement , 5-21 10/100 port parame te r auto-negot iation mo de , 5-21 category , 5-20 duplex mo de , 5-20 flow control mo de , 5-20 name , 5-20 port PACE priority , 5-21 rate limit burst size , 5-21 rate ...

  • Avaya Cajun P882 - page 714

    Index-2 Avaya P550R, P580, P880, an d P882 Mul tiservice Switch User Guide, v5.3.1 Index priority , 6-17 status , 6 - 1 8 TblInst , 6-17 valid , 6-17 address forwarding table , persistence parameters ageout , 6-20 permanent , 6-20 address mask DVMRP interface stat isti ca l parameters , 9-79 address table instance delete all learned entries , 6-13 ...

  • Avaya Cajun P882 - page 715

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 Index-3 Index AARP req rx , 15-26 AARP req tx , 1 5 - 2 6 Bcast error , 15-26 checksum error , 15-26 config addr error , 1 5 - 2 6 config zone error , 15-26 DDP forward counter , 15-26 DDP input counter , 15-25 DDP local counter , 15-26 DDP output co unter , 15-25 DDP output ...

  • Avaya Cajun P882 - page 716

    Index-4 Avaya P550R, P580, P880, an d P882 Mul tiservice Switch User Guide, v5.3.1 Index creating , 15-20 editin g , 15-22 AppleTal k zone fil ter par ameters access list , 15-21 interface , 1 5 - 2 1 name , 15-21 type , 15-21 AppleTal k zone tab le viewing , 15-32, 15-33 AppleTalk zone table statistics current number of zones , 15-34 index , 1 5 - ...

  • Avaya Cajun P882 - page 717

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 Index-5 Index Virtual LAN binding options , 5-30 bind to receiv ed Virtual LAN binding options , 5-30 Bi ndi ng a Po rt t o m or e t ha n o ne VL AN wi th th e CLI , 4-6 binding options Virtual LANs , 5-30 binding type VLAN switch port table parameters , 4-12 blocking state ( ...

  • Avaya Cajun P882 - page 718

    Index-6 Avaya P550R, P580, P880, an d P882 Mul tiservice Switch User Guide, v5.3.1 Index client port multicast session parameters , 16-12 client pruning timer client pruning timer , 16-7 clients per VLAN, disp la ying , 16-34 collisions , 19-7 communities configuring SNMP , 2-20, 2-23 SNMP , 2-20 Community String , 2-21 comparison value Layer 3 rou ...

  • Avaya Cajun P882 - page 719

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 Index-7 Index flow control , 2-34 parity , 2-34 stop bit s , 2 - 3 4 consumer signal LDAP statistics , 9-109 contacting Lucent , - x v contacting Lucent technical support , - x v controlling ad dress tab l e size reconfiguration , 6-14 conve ntion s , -xvi cooling system stat ...

  • Avaya Cajun P882 - page 720

    Index-8 Avaya P550R, P580, P880, an d P882 Mul tiservice Switch User Guide, v5.3.1 Index DDP input counter AppleTalk glob al statistics , 15-25 DDP local counter AppleTalk glob al statistics , 15-26 DDP output co unter AppleTalk glob al statistics , 15-25 DDP output long AppleTalk glob al statistics , 15-25 DDP output short AppleTalk glob al statis ...

  • Avaya Cajun P882 - page 721

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 Index-9 Index Displaying OSPF Neighbors Using the Web Agent , 11-25 displaying OSPF statistics , 11-21 displaying router ports , 16-8 displaying the cooling system status , 3-16 displaying the DVMRP designated forwarder table , 9 - 8 4 displaying the DVMRP routing table , 9-8 ...

  • Avaya Cajun P882 - page 722

    Index-10 Avaya P550R, P580, P880, an d P882 Mul tiservice Switch User Guide, v5.3.1 Index unrecognized packets received , 9-79 DVMRP interface statistics examining , 9 - 7 8 DVMRP multicast forwarding cache displaying , 9-86 DVMRP multicast forwar ding cache parameters destination group address , 9-87 downstream interface , 9-88 invalid flows from ...

  • Avaya Cajun P882 - page 723

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 Index-11 Index AppleTal k inter face parame ters , 15-6 end one-time summer time hours configuration , 3-10 summer time hours configuratio n , 3-8 end network IPX RIP filter parameters , 13-4 entries remo ved due to route changes forwarding cache (FE) parameters , 18-10 entri ...

  • Avaya Cajun P882 - page 724

    Index-12 Avaya P550R, P580, P880, an d P882 Mul tiservice Switch User Guide, v5.3.1 Index fan status event cla ss para meters , 1 7 - 1 7 Fast Ethernet module auto-negotiation mode, enabling , 5-18 configuring , 5-16 rate limit mode, e nabling , 5-18 Fast Ethernet module, configuri ng pace priori ty mode , 5 - 1 9 rate limit rate , 5 - 1 9 Fast Eth ...

  • Avaya Cajun P882 - page 725

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 Index-13 Index IPX interface , 12-8 front panel LE Ds interpreting , 17-1 front panel LEDs (10/100 modu le) port , 17-2 G general system information, setting device contact , 3-2 device location , 3-2 switch name , 3 - 1 get nearest server reply IPX SAP inte rf ace pa ramete ...

  • Avaya Cajun P882 - page 726

    Index-14 Avaya P550R, P580, P880, an d P882 Mul tiservice Switch User Guide, v5.3.1 Index high priori ty allocation buffer management table p arameters , 20-6 high priority service ratio buffer management table p arameters , 20-6 high-preference static routes IP glob al config ur ation parameters , 9-13 high-priority traffic , 20-1 hops IPX RIP fil ...

  • Avaya Cajun P882 - page 727

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 Index-15 Index group reporter address , 9 - 7 5 IGMP interface parameters always be group membership querier , 9-52 IGMP version , 9-52 interface , 9 - 5 2 IP address , 9-52 IP address mask , 9-52 maximum groups , 9-52 neighbor querier timeou t interval , 9-53 process leave p ...

  • Avaya Cajun P882 - page 728

    Index-16 Avaya P550R, P580, P880, an d P882 Mul tiservice Switch User Guide, v5.3.1 Index IP interface paramete rs , 9-8 IP routing table search parameters , 9-66 IPX interface , 12-8 IPX RIP filter parameters , 13-4 IPX route table parameter , 12-21 IPX routing table sea rch paramete rs , 1 2 - 2 1 IPX SAP filte r pa ra meters , 1 4 - 5 IPX SAP in ...

  • Avaya Cajun P882 - page 729

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 Index-17 Index VRRP statistical parameters , 9 - 9 8 IP address mask DVMRP interface parameters , 9-57 IGMP interface parameters , 9-52 IGMP interface stat istical para meters , 9-72 IP and IPX router , 1-28 IP ARP searching ARP cache , 9-68 IP forward datagram s IP routing g ...

  • Avaya Cajun P882 - page 730

    Index-18 Avaya P550R, P580, P880, an d P882 Mul tiservice Switch User Guide, v5.3.1 Index ICMP in messages , 9-63 ICMP in parameter proble ms , 9 - 6 3 ICMP in redirects , 9-63 ICMP in source quenches , 9 - 6 3 ICMP in time exceeds , 9-63 ICMP in timestamp rep lys , 9 - 6 3 ICMP in timestamp requests , 9-63 ICMP out address mask reply , 9-64 ICMP o ...

  • Avaya Cajun P882 - page 731

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 Index-19 Index source node , 12-3 source s ocket , 12-3 transport control , 12-2 IPX datagram structure , 1 2 - 2 IPX forward dat agrams IPX global parameters , 12-19 IPX global parameters , 12-4, 12-5, 12-9 in max hops exce eded , 1 2 - 1 9 IPX forward dat agrams , 12-19 IPX ...

  • Avaya Cajun P882 - page 732

    Index-20 Avaya P550R, P580, P880, an d P882 Mul tiservice Switch User Guide, v5.3.1 Index sourc e , 12-21 IPX routing table statistics current number of routes , 12-22 peak number of routes , 1 2 - 2 2 route add failures , 12-22 IPX SAP filte r pa ramete rs direction , 14-6 filter/suppress , 14-7 hops , 14-7 interface , 1 4 - 5 name , 14-5 preceden ...

  • Avaya Cajun P882 - page 733

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 Index-21 Index advertisement life time , 9-103 interface , 9-103 IRDP state , 9-103 max. advert isement interval , 9-103 minimum advertisement interval , 9-103 network address , 9-103 preferences , 9-103 IRDP state IRDP parameters , 9-103 J jabbers Ethernet interface statisti ...

  • Avaya Cajun P882 - page 734

    Index-22 Avaya P550R, P580, P880, an d P882 Mul tiservice Switch User Guide, v5.3.1 Index learned entries delete invalid learned entries , 6-13 learning state (spanni ng tree bridge port) , 4-22 LEDs port (10/100 modu le) , 17-2 LGMP client configuratio n parameters enable state , 16-30 intelligent multicast session statistics , 16-31 LGMP clients ...

  • Avaya Cajun P882 - page 735

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 Index-23 Index M MAC Address search , 6 - 1 5 MAC address address forwarding table parameters , 6-17 AppleTalk ARP cache t able sta tistics , 15-31 filter ing , 6-15 IP static ARP para m ete rs , 9-44 multicast session parameters , 16-12 static multicast session c onfiguratio ...

  • Avaya Cajun P882 - page 736

    Index-24 Avaya P550R, P580, P880, an d P882 Mul tiservice Switch User Guide, v5.3.1 Index software flow contr ol , 2 - 3 9 modify IPX static routes , 12-12 modifying DVMRP interface information , 9-57 modifying IGMP interfaces , 9-51 Modifying OSPF Summaries , 11-20 modifying OS PF virtual links , 11-17 Modifying t he DVMRP Glob al Configur ation U ...

  • Avaya Cajun P882 - page 737

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 Index-25 Index network r ange AppleTalk ARP cache t able sta tistics , 15-31 AppleTalk interface statistics , 15-28 AppleTal k route table st atistics , 15-29 AppleTalk zone table statistics , 15-33 network range end AppleTal k inter face parame ters , 15-7 AppleTal k static ...

  • Avaya Cajun P882 - page 738

    Index-26 Avaya P550R, P580, P880, an d P882 Mul tiservice Switch User Guide, v5.3.1 Index monitoring swit ch perf ormance , 11-21 OSPF global configuration parameters , 11-4 searching the link state database , 11-27, 11-32 OSPF area parameters area ID , 11-6 area type , 11-6 stub metric , 11-6 translate 7 into 5 , 11-6 type 3 ASE filter , 1 1 - 6 O ...

  • Avaya Cajun P882 - page 739

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 Index-27 Index OSPF statistical parameters , 11-22 OSPF virtual link parameters area , 1 1 - 1 5 authenticati on , 1 1 - 1 6 authenticati on key , 11-16 dead interv al , 11-16 hello interval , 11-15 MD5 key ID , 1 1 - 1 6 retransmit interval , 11-15 router ID , 1 1 - 1 5 tran ...

  • Avaya Cajun P882 - page 740

    Index-28 Avaya P550R, P580, P880, an d P882 Mul tiservice Switch User Guide, v5.3.1 Index port name gigabit port parameters , 5-14 VLAN switch port table parameters , 4-12 port PACE priority 10/100 port paramete r , 5-21 gigabit port parameters , 5-15 port VLAN Cisco Catalyst 5000 parameters , 5-28 switch port configuration parameters , 5 - 2 7 swi ...

  • Avaya Cajun P882 - page 741

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 Index-29 Index query request interval IGMP interface parameters , 9-53 query response interval IGMP interface parameters , 9-53 queues managing , 20-2, 20-7 service rati o , 2 0 - 1 R RADIUS client configuring , 2-29, 2-31 RADIUS configuration paramet ers Cajun-Service-Type r ...

  • Avaya Cajun P882 - page 742

    Index-30 Avaya P550R, P580, P880, an d P882 Mul tiservice Switch User Guide, v5.3.1 Index RIP packet tracing enabling , 17-7, 17-12 RIP queries IP routing table st atistical parameters , 9-68 RIP route changes IP routing table st atistical parameters , 9-68 RIP routes IP glob al config ur ation parameters , 9-13 RIP statistical pa rameters bad pack ...

  • Avaya Cajun P882 - page 743

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 Index-31 Index RMON mirror port configuration parameters , 19-13 SAP SAP , 12-4, 12-9 save running configurat ion to startu p configura- tion configuration file management , 2 - 5 0 saving your current configuration , A - 3 search base LDAP configurat ion parameters , 9-107 S ...

  • Avaya Cajun P882 - page 744

    Index-32 Avaya P550R, P580, P880, an d P882 Mul tiservice Switch User Guide, v5.3.1 Index IPX routing table sea rch paramete rs , 1 2 - 2 1 IPX service table parameter , 12-25 IPX service table search parameter , 12-24 source address Layer 3 route cache search parameters , 18-7 source ad dress mask DVMRP multicast forwarding cache parameters , 9 - ...

  • Avaya Cajun P882 - page 745

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 Index-33 Index AppleTal k route table statistics , 15-29 DVMRP interface stat isti ca l parameters , 9-79 IGMP interface stat istical para meters , 9-72 IPX SAP interface st atistical paramete rs , 13-8, 14-13 LGMP server display per VLAN parameters , 16-28 OSPF link paramete ...

  • Avaya Cajun P882 - page 746

    Index-34 Avaya P550R, P580, P880, an d P882 Mul tiservice Switch User Guide, v5.3.1 Index links , 5 - 3 7 MAC address , 5-37 name , 5-37 port , 5-37 port VLAN , 5-37 STAP mode , 5 - 3 7 trunk mode , 5-37 viewing , 5-36 VLAN classification , 5-37 switch ports, single comma nd , 5-35 Synchronizing the Pr imary and Redundant CPUs , 7-12 system event c ...

  • Avaya Cajun P882 - page 747

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 Index-35 Index Cisco Catalyst 5000, parameters , 5-28 switch port configuration parame te rs , 5-27 switch p ort para meter , 5-37 TTL AppleTal k ARP cache t able sta tistics , 15-32 IPX route table parameter , 12-21 IPX service table parameter , 12-25 purge , 1 0 - 2 TTL exp ...

  • Avaya Cajun P882 - page 748

    Index-36 Avaya P550R, P580, P880, an d P882 Mul tiservice Switch User Guide, v5.3.1 Index use default ro ut e use default route , 1 2 - 4 use default route for proxy ARP IP glob al config ur ation parameters , 9-12 use interpacket gap IPX SAP inte rf ace pa ramete rs , 1 4 - 2 use max packet size IPX SAP inte rf ace pa ramete rs , 1 4 - 2 user acco ...

  • Avaya Cajun P882 - page 749

    Avaya P550R, P580, P880, and P882 Multiser vice Switch User Guide, v5.3.1 Index-37 Index VLAN binding Cisco Catalyst 5000 parameters , 5-29 switch port configuration parame te rs , 5-27 VLAN binding, configur ing Virtual LANs , 5-26 VLAN classification switch p ort para meter , 5-37 VLAN configuratio n parameters auto increment HT size , 4-10 initi ...

  • Avaya Cajun P882 - page 750

    Index-38 Avaya P550R, P580, P880, an d P882 Mul tiservice Switch User Guide, v5.3.1 Index Zip Query Rx AppleTalk glob al statistics , 15-26 Zip Query Tx AppleTalk glob al statistics , 15-26 Zip Reply R x AppleTalk glob al statistics , 15-26 Zip Reply T x AppleTalk glob al statistics , 15-26 zone AppleTal k i nterface parameters , 15-7 AppleTalk NBP ...

Manufacturer Avaya Category Switch

Documents that we receive from a manufacturer of a Avaya Cajun P882 can be divided into several groups. They are, among others:
- Avaya technical drawings
- Cajun P882 manuals
- Avaya product data sheets
- information booklets
- or energy labels Avaya Cajun P882
All of them are important, but the most important information from the point of view of use of the device are in the user manual Avaya Cajun P882.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Avaya Cajun P882, service manual, brief instructions and user manuals Avaya Cajun P882. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Avaya Cajun P882.

Similar manuals

A complete manual for the device Avaya Cajun P882, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Avaya Cajun P882 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Avaya Cajun P882.

A complete Avaya manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Avaya Cajun P882 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Avaya Cajun P882, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Avaya Cajun P882, that we can find in the current document
3. Tips how to use the basic functions of the device Avaya Cajun P882 - which should help us in our first steps of using Avaya Cajun P882
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Avaya Cajun P882
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Avaya Cajun P882 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Avaya Cajun P882?

Use the form below

If you did not solve your problem by using a manual Avaya Cajun P882, ask a question using the form below. If a user had a similar problem with Avaya Cajun P882 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)