English dropdown-ico

Manual GarrettCom 6K32FR

75 pages 1.75 mb
Download

Go to site of 75

Summary
  • GarrettCom 6K32FR - page 1

    www Garre t t C om c om .. www Garre t t C om c om .. Corporate Headquarters GarrettCom, Inc. 47823 Westinghouse Dr. Fremont, CA 94539-7437 Phone (510) 438-9071 Fax (510) 438-9072 Website: http://www.GarrettCom.com email support@garrettcom.c om Magnum 6K32F, 6K32FR, 6K32FC & 6K32FRC Industrial Managed Switch Installation and User Guide Hardware ...

  • GarrettCom 6K32FR - page 2

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) i www Garre t t C om c om .. Magnum  6K32F, 6K32FR, 6K32FC & 6K32FRC Managed Switch Hardw are Installation and User Guide Part #: 84-00103Z (Rev. A) Trademarks Ethernet is a trademark of Xerox Corporation NEBS is a trademark of Telcordia Technologies UL is a registere ...

  • GarrettCom 6K32FR - page 3

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) ii www Garre t t C om c om .. Contacting GarrettCom, Inc Please use the mailing address, phone and fax numbers and email address listed below: GarrettCom, Inc. 47823Westinghouse Dr. Fremont, CA 94539-7437 Phone (510) 438-9071 Fax (510) 438-9072 Website: http://www.GarrettCom ...

  • GarrettCom 6K32FR - page 4

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) iii www Garre t t C om c om .. TABLE OF CONTEN TS .......................................................................... Page 1.0 SPECIFICATIONS ................................................................................ 1 1.1 Technical Specifications .............. ...

  • GarrettCom 6K32FR - page 5

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) iv www Garre t t C om c om .. 4.4 Flow-control, IEEE 802.3x standard .................................................. 46 5.0 6K32F SERIES MANAGED SWITCH PORT MODULES............. 47 5.1 Inspecting the Package and Product ................................................... ...

  • GarrettCom 6K32FR - page 6

    Magnum 6K32F/FR/FC/FRC Managed Switch Installation and User Guide (05/08) www Garr et t C om c om .. The Magnum Line INDUSTRIAL NETWORKING PRODUCTS "DESIGNED AND M ANUFACTURED IN THE US A" OVERVIEW GarrettCom, Inc. offers the premium-quality Magnum  line of INDUSTRIAL connectivity products with industry-standard functionality and built ...

  • GarrettCom 6K32FR - page 7

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 1 www Garr e t t C om com .. 1.0 SPECIFICATIONS 1.1 Technical Specifications Performance Filtering / Forwarding Rate: Ethernet:14,880 pps Fast Ethernet: 148,800 pps Gigabit Ethernet: 1,488,000 pps Switching Processing Ty pe: Store and Forward with IEEE 802.3x full- duplex fl ...

  • GarrettCom 6K32FR - page 8

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 2 www Garr e t t C om com .. Maximum Standard Gigabit Eth ernet Segment Lengths: 1000BASE-T (CAT5E or higher is recommended) - 100 m 1000BASE-SX, full-duplex, multi-mode(62.5  m cable) - 220m 1000BASE-SX, full-duplex, multi-mode(50  m cable) - 550m 1000BASE-LX, full-du ...

  • GarrettCom 6K32FR - page 9

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 3 www Garr e t t C om com .. Fuse Required – 3 Amps 125VDC and 100VDC Input Voltage : 88 to 300VDC Fuse Required – 1 Amp Std. Terminal Block : “ -, GND, + ” Power Consumption: same as for AC models, see above Warning - All the fuse replacement must be replaced with s ...

  • GarrettCom 6K32FR - page 10

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 4 www Garr e t t C om com .. 1.2 Ordering Information Magnum Managed Switch MODEL DESCRIPTION Magnum 6K32F or 6K32FR (Reverse model) 32-10/100 RJ-45 ports or 8 Gigabit ports managed switch with four modular slots whic h may be configured with a selection of 10/100/1000Mb fib ...

  • GarrettCom 6K32FR - page 11

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 5 www Garr e t t C om com .. 6KP8-MTRJ SFF Fiber module, w/eight 100M b mm FX MT-RJ connectors 6KP8-MLC SFF Fiber module, w/eight 100M bps mm FX LC connectors 6KP8-SLC SFF Fiber module, w/eight 100Mbps sgl-m FX LC connectors 6KP8-45MT “4+4” module, w/four RJ-45 ports and ...

  • GarrettCom 6K32FR - page 12

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 6 www Garr e t t C om com .. GBIC-TP GBIC transceiver module for use in GBPM-xOTX. One 802.3ab 1000BASE-T port with RJ-45 connector Modules with Gb, not using GBICs (all modules inc lude fr ont pane l) 6KP5-1CU4RJ “G+4” module, with one GBIC c opper (Auto-negotiating) tr ...

  • GarrettCom 6K32FR - page 13

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 7 www Garr e t t C om com .. 6K32F Series PoE Modules with 48VDC Pass-Through Configuration options: All module slots of 6K32F Series switch with 48VDC pow er input may be configured w ith a PoE Module (typical configuration has slot A loaded first with PoE module) P6KP8-RJ4 ...

  • GarrettCom 6K32FR - page 14

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 8 www Garr e t t C om com .. 6K32F Series PoE Modules with 48VDC Power Inside NOTE: For configuring in 6K Swit c hes having AC /125VDC pow er input Configuration options: only one A, B, C or D (left to right) module slot of 6K32F Series switc h w ith 48VDC power input may be ...

  • GarrettCom 6K32FR - page 15

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 9 www Garr e t t C om com .. 2.0 Introduction 2.1 Inspecting the Package and Product Examine the shipping container for obvious damage prior to installing this product; notify the carrier of any damage that you believe occurred during shipment or delivery. Inspect the conten ...

  • GarrettCom 6K32FR - page 16

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 2.2 Product Description – Magnum 6K32FC / FRC (Convection cooled - No-fans) Managed Switch All of the Magnum 6K32F Series of Ethernet Switches comply with IEC61850 and IEEE1613 Utility Automation and other industry standards. The Magnum 6K32FC/FRC Managed Switc hes are spe ...

  • GarrettCom 6K32FR - page 17

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 11 www Garr e t t C om com .. switching services for both “smooth” streami ng and “bursty” data traffic. For redundant LANs it offers S-ring, RS-Ring, Link-Loss-Learn, STP and RSTP. Optional Security features include SNMPv3, SSL/SSH, 802.1X , TACACS+, Port Security, ...

  • GarrettCom 6K32FR - page 18

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) AC, and –48VDC power input options are de signed for Telco environments, while the 24VDC is designed for Industrial/Contro l Room applications. The 125 & 250VDC versions are for power s ub stations applications. Designed primarily for use in harsh, un-controlled temper ...

  • GarrettCom 6K32FR - page 19

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) designed to meet the future demand of Ethern et requirements with cost-effective s ecure solutions. The Magnum 6K32F is also available in a Reve rse model option, where the LEDs are on the front and the available por ts along with the power supply area found on the rear side ...

  • GarrettCom 6K32FR - page 20

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) when ON (half-duplex when OFF), and the blinking ACT LED indicates receiving Activity on the port. A fiber c able must be c onne c t e d into a SFF port a nd the L ink (L K) indicator for that port must be ON (indicating there is a powered-up device at the other end of the c ...

  • GarrettCom 6K32FR - page 21

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 2.2.3a PoE(Power Inside), model PI 6KP8-45RJ (MDIX), 8-port 10/100Mb The New PoE RJ-45 ports act similar to regular RJ-45 ports, except they have capability of providing power on each port to power up the PD devices, per the IEEE802.3af PoE standard. Only 4 x RJ-45 (10/100) ...

  • GarrettCom 6K32FR - page 22

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) modules. Please check the orde ring information Sec.1.2 for all the various P6K PoE modules option. The LEDs on 6KP8-RJ45- PoE module are slightly different compared to regular (non-PoE) RJ-45 modules as shown in Fig 2. When the PoE port is in use, the PoE LED is ON when con ...

  • GarrettCom 6K32FR - page 23

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 2.2.5 Four-Port 10 Mb mm Fiber ST Modules The 4port @10Mb ST fiber modules be have the same as the 8@100Mb ST fiber modules except for the 10Mb speed. For port numbering, ports 1, 2, 5, 6 are present, ports 3, 4, 7, 8 are not present. The de fault setup on the 10Mb fiber mod ...

  • GarrettCom 6K32FR - page 24

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 18 www Garr e t t C om com .. The 1000Mb Gigabit fiber-port modul es on the Magnum 6K32F Series switches are normally set (factory default) to operate at AUTO mode for best fiber distance and performance. The 1000Mbps SC fi ber-optic module on the Gigabit -SX and s LEDs that ...

  • GarrettCom 6K32FR - page 25

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 19 www Garr e t t C om com .. When the Magnum 6K32F Series Switch detects that its free buffer queue space is low, the Switch sends industry standard (full-duplex only) PAUSE packets ou the devices sending packets to cause “flow c ontrol”. This tells the sending devices ...

  • GarrettCom 6K32FR - page 26

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 20 www Garr e t t C om com .. 2.3 Features and Benefits  Managed switching for high performan ce Ethernet LANs Magnum 6K32F Series Switches provide non-bl ocking (all ports can run at full speed at once) performance with standard Manage d Networks Software (MNS-6K) includ ...

  • GarrettCom 6K32FR - page 27

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 21 www Garr e t t C om com .. client for IP configuring, Radius X, TACACS+ etc.  MDI-MDIX Auto-negotiating on RJ-45 ports for con venient cascading usin g straight RJ-45 cable.  Supports PoE module to provide pow e r via RJ-45 c a ble on the modular slots. 2.4 Applicat ...

  • GarrettCom 6K32FR - page 28

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) The modularity of the 6K32F Series Managed Switch makes it an attractive choice for use in applications with LAN conn ections to an organization’s multiple site offices. The different offices can be easily connected together with the Fiber ports supported by the Magnum 6K3 ...

  • GarrettCom 6K32FR - page 29

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 23 www Garr e t t C om com .. managed to provide easy, detectable, unint errupted support through a viewable SNMP onitor. ure other security features to provide a ser e the bandwidth for high speed to upport the peak traffic and minimize congestion. DC 25s has been . data mi ...

  • GarrettCom 6K32FR - page 30

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 6K32F Series in a Redundant application Example 4: In a “ (video+data)” application where a network being designed to catered the need of multicast streaming and broadcast tra ffic of higher bandwidth to provide a video conferencing and video in demand channel option to ...

  • GarrettCom 6K32FR - page 31

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) Equipped with IGMP-L2 mode enhanced features allow the Magnum 6K32F Series to meet the fastest growing applica tion of video monitoring or video surveillance demand of industry and provide an economical and effective solution to meet that expectation. Figure 4: A multicast t ...

  • GarrettCom 6K32FR - page 32

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 26 www Garr e t t C om com .. 3.0 Installation Before installing the equipment, it is necessary to take the following precautions: 1.) If the equipment is mounted in an enclosed or multiple rack assembly, the environmental temperature around the equipment must be less than o ...

  • GarrettCom 6K32FR - page 33

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 27 www Garr e t t C om com .. 3.2 Connecting Ethernet Media The Magnum 6K32F Series Switc hes are specifically designed to support all standard Ethernet media types within a single Switch unit. This is accomplished by using a family of different port Modules which can be ind ...

  • GarrettCom 6K32FR - page 34

    Magn m 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) u 28 www Garr e t t C om com .. 4. Connect the Receive (RX) port (dark colored post on the PM) to the Transmit (TX) port of the remote device. Use the non-color coded fiber strand for this. 5. The LINK LED on the front of the PM w ill illuminate when a proper connection has ...

  • GarrettCom 6K32FR - page 35

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 29 www Garr e t t C om com .. shielded, either unshielded or shielded cables and wiring may be used. 2. Connect the other end of the cable to the corresponding device 3. Use the LINK LED to ensure proper connectivity by noting that t he LED will be illuminated when the unit ...

  • GarrettCom 6K32FR - page 36

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 3.2.6 Gigabit SFP (Small Form-factor Pluggable ) Optical Transceivers The small form-factor pluggable (SFP) is a co mpact optical transceiver used in optical communications for both telecommunication a nd data communications applications. Due to its compact, hot pluggable ch ...

  • GarrettCom 6K32FR - page 37

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) The various SFPs transceivers supported by GarrettCom 6KQs D slot are- Module Model# Gigabit Gb Modules, fixed ports--SFP (Small Form Factor) 6KP2-2GSFP 2 SFP 6KP2-1GSFP1CU 1SFP 31 www Garr e t t C om com .. 1 CU 6KP1-1SFP 1SFP 6KP1-1GCU 1 CU Gb SFP fiber optic transceivers ...

  • GarrettCom 6K32FR - page 38

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 32 www Garr e t t C om com .. and the “Cable Loss” for 9/125 (Single-mode) i s 0.25 dB/km(LXSC40) and the “Cable Loss” for 9/125 (Single-mode) i s 0.2 dB/km (LXSC70) The following data has been collected from component manufacturer’s (Agilent’s and Lucent’) web ...

  • GarrettCom 6K32FR - page 39

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 3.3 Table-Top or Shelf Mounting The Magnum 6K32F Series Managed Switc hes can be easily mounted on a table-top or any suitable horizontal surface. They have four rubber feet to provide stability without scratching finished surfaces. 3.3.1 Rack-mounting (for 19” RETMA racks ...

  • GarrettCom 6K32FR - page 40

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) The optional 23” brackets and the ETSI (21”) brackets each come as a pair in a package, along with the necessary screws for attaching the brackets to the sides of the Magnum Switch unit. They must be ordered as separate line items. 3.3.2 Rack-mounting, Reverse version of ...

  • GarrettCom 6K32FR - page 41

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 35 www Garr e t t C om com .. The 32-port units will consume over 30 watts of power typically. When connecting the Ethernet cabling, there is no need to power down the unit. Individual segments can be connected or disconnected without concern fo r AC power-related problems o ...

  • GarrettCom 6K32FR - page 42

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 3.5 6K32F Series Port Module (6KPM) Installation The Magnum 6K32F Series Switches are received from the factory with the customers required 6KPM modules installed. There may be situati ons where 6KPM cards need to be added or replaced. In cases wh ere a 6KPM module needs to ...

  • GarrettCom 6K32FR - page 43

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) Step 2. Remove Chassis Cover The Magnum 6K32F chassis are combined with top, bottom and module panel parts and assembled together with the help of 34 Philips-head screws. First Remove the side panel (2 screws located on the right side of chassis). Second, remove the module p ...

  • GarrettCom 6K32FR - page 44

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) Looking down into the Magnum 6K32F Series un it, notice that there are individual PM installation spaces and female latch (white) c onnectors provided on the far right side of the main board along with four stand-off’s for 6KPM card position. (See Figure 3.5.1c). Figure 3. ...

  • GarrettCom 6K32FR - page 45

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) Step 3. The figure here illustrates the basic lay out of an individual PM card. 6KPM card fits into the space provided on the main board over the grand-daughter Bd. a nd the ( as shown in below fig. with arrow mark). male latched cream color connectors ig 3.5.2b: Daughter Bo ...

  • GarrettCom 6K32FR - page 46

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) NOTE: . When leaving 6KPM slots empty, always use a face plate (Magnum 6KM- BLNK) to cover the slot opening in the fr ont panel. This will ma intain proper cooling air flow, safety, and operation as requir ed by FCC, CE, and other regulations. Step 6. Now screw down the daug ...

  • GarrettCom 6K32FR - page 47

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) Step 2. Remove retaining screws placed on top for the 6KPM On the top of the daughter module there are seven retaining screws for each 6KPM card. These screws are used to secure a 6KPM card in pos ition (see Figure 3.5.3a). Remove the three standoffs holding the Granddaughte ...

  • GarrettCom 6K32FR - page 48

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 3.6 Connecting the Console Terminal to Magnum 6K32F Series Management) ( Use a DB-9 “null modem” cable to connect the Magnum 6K32F Series Console Port (the RS-232 port on the 6K32F Switch) to the your PC, so that your PC becomes the 6K32F ’s Console Terminal. Note: The ...

  • GarrettCom 6K32FR - page 49

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 43 www Garr e t t C om com .. connect directly to the switch using a straight through cable. Note : For using Console port to configure the managed switch, a serial (Null-modem) female to female cable is required to communicate properly. The Null-Modem (DB-9) er fro m the fa ...

  • GarrettCom 6K32FR - page 50

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 44 www Garr e t t C om com .. 4.0 OPERATION This chapter describes the functions and operation of the Magnum 6K32F Series Switch. 4.1 Switching Functionality A Magnum 6K32F Series provides switche d connectivity at Ethernet wire- speed among all of its ports . The Magnum 6K3 ...

  • GarrettCom 6K32FR - page 51

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 45 www Garr e t t C om com .. 4.2 Status LEDs For all Magnum 6K32F Series models : PWR: Power LED, ON when external power is applied to the unit. LK: Steady ON, Link status for 10 Mbps and 100Mbps operation. ACT: ON with port activity for 10 Mbps and 100Mbps operation. F/H: ...

  • GarrettCom 6K32FR - page 52

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) When Magnum 6K32F Series RJ-45 coppe r ports are set for auto-negotiation and are connected to another auto-negotiating device, there are 4 different speed and F/H modes possible depending on what the other device supports. These are: (1) 100Mb full- duplex, (2) 100Mb half-d ...

  • GarrettCom 6K32FR - page 53

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 47 www Garr e t t C om com .. blocking) on Full-Duplex ports, which provide s for a “PAUSE” packet to be transmitted to the sender when the packet buffer is nearly filled and there is danger of lost packets. The transmitting device is commanded to stop transmitting into ...

  • GarrettCom 6K32FR - page 54

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) modular slot. Since the Magnum 6K32F Series Switches have dual-speed capability for copper ports, the 6 or 8-por t interfaces are designed to support all standard Ethernet media types at 10 or 100Mps speed. E ach 6K32F PM can provide two, four, six or eight ports for connect ...

  • GarrettCom 6K32FR - page 55

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) connector functions as a fiber optic tr ansceiver to support 10BASE-FX network segments. When installed in a Magnum 6K32F Series Managed Switch, the copper port supports the standard distance 100m on each port and the fiber port supports fiber optic cable distances up to the ...

  • GarrettCom 6K32FR - page 56

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) provide a convenient way for the half duplex hub to connect to the switch through 10Mb fiber ports. Whereas the 100Mb ST module a llows it to connect the 100Mb demand of the Switch devices. It supports distances according to the 10Base-FL standard i.e, 2Km distance for mu lt ...

  • GarrettCom 6K32FR - page 57

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 51 www Garr e t t C om com .. functions in one module of the 6K32F Se ries Switch supporting four Copper and two single-m s -mode and cable lengths can be as much as a The e 6KP6-RJMSC, the label Sgl. M.” is at the top of the faceplate of the 6KP6-RJS SC. 5.2.4 per port an ...

  • GarrettCom 6K32FR - page 58

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) indicating proper connectivity with the re mote device when lit, and a FDX/HDX L indicating full-duplex mode when lit (or half-duplex when off). The 10/100 LED indicates the speed for the co ED pper port, wh ich is 10Mbps when the LED is ON and 10 Mb when the LED is OFF. .2. ...

  • GarrettCom 6K32FR - page 59

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) the same as the ST and SC-types. It has the same LEDs per port indicating port activity ACT), Link (LK), and FDX or HDX operation ( 5.2.6 6KP8-45MT, 4@ 10/100Mbps RJ-45 and 4@100Mb multi-mode FX , MTRJ Small-Form-Factor The Magnum 6KP (Small Form Factor) MTRJ type ports. The ...

  • GarrettCom 6K32FR - page 60

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) the remote device when lit, and a FDX/HDX LED indicating full-duplex mode when lit (or half-duplex when off). 5.2.8 -LC small-form 6KP8-45LC, Combo 4@ 100Mbps multi-mode factor and 4@ 10/100 Mbps RJ-45 Connector The Magnum 6KP8-45LC Module is a combo module with a combinatio ...

  • GarrettCom 6K32FR - page 61

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED that indicates proper connec tivity with the remote device when lit, a FDX/HDX LED to indicate full-duplex mode wh en lit (or half-duplex when off), and a and “10/100” LED indicating 1 ...

  • GarrettCom 6K32FR - page 62

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 56 www Garr e t t C om com .. informati the roperly to an 803.af compliant PD device on that port. When no PoE ED on Sec.1.2 for all the various P6K PoE modules option. The LEDs on 6KP8-RJ45- PoE modules ar e slightly different compared to regular (non-PoE) RJ-45 modules as ...

  • GarrettCom 6K32FR - page 63

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) traffic is not affected by PoE. LINK and ACTIVITY LEDS are combined hat is marked as LINK/ACT, as shown in the diagram PoE ED on the PoE modules into one LED . t L s Summary For P  oE devices, each RJ-45 PoE port supports only 802.3af complaint devices. The PoE LED is ON ...

  • GarrettCom 6K32FR - page 64

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 5.2.11a 6KP8-45-2LC, 6@ 10/100Mbps RJ-45 and 2@100Mb single-mode FX , LC Small-Form-Factor The Magnum 6KP8- 45SLC eight port Module is a combo module with copper and fiber (Small Form Factor) LC type fiber ports. The small size of LC connectors give an advantage of placing m ...

  • GarrettCom 6K32FR - page 65

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 5.2.12a GBPM-2OTX (Two Gigabit option) The Magnum 6K32-Series offered a wide selection of Gigabit speed with multiple choice of copper or Fiber or mix for the modular slot via GBPM-2OTX (2 x Giga module). While up to two Gigabit modules (max.) can be configured in the modula ...

  • GarrettCom 6K32FR - page 66

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) The two Giga port has been offered as GBPM-2OTX (fiber or RJ-45), whereas the single Gigabit module comes in flavor of G+4(10/100 RJ-45 ports) or G+2 (100Mb fiber ports) as shown below in the above figure. Each port has an Activity (ACT) LED indicating packets being received ...

  • GarrettCom 6K32FR - page 67

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 61 www Garr e t t C om com .. 6.1 Befo re Ca lling for Assistance 1. If difficulty is encountered when insta lling or operating the unit, refer back to the Installation Section of the applicable chapter of this manual. Also check to make sure that the various compone nts of ...

  • GarrettCom 6K32FR - page 68

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 62 www Garr e t t C om com .. 2. An accurate list of GarrettCom product model(s) involved, with serial number(s). Include the date(s) that you purchased the products from your supplier. 3. It is useful to include other networ k equipment models and related hardware, includin ...

  • GarrettCom 6K32FR - page 69

    Magnum 6K32F/FR/FC/FRC Managed Switch In tallat s ion and User Guide (05/08) 63 www Garr e t t C om com .. 6.4 Shipping and Packaging Information Should you need to ship the unit b ack to GarrettCom, please follow these instructions: 1. Package the unit carefully. It is r ecommended that you use the original container if available. Units should be ...

  • GarrettCom 6K32FR - page 70

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) APPENDIX B : Internal DC Power Supply Options B1.0 SPECIFICATIONS FOR MAG NUM 6K32F SERIES SWITCHES, DC POWER Power Supply (Inte rnal -48VDC Option) DC Power Connector: 3 terminals: “ - “, “GND”, “+” Input Voltage: 36 - 70 VDC Power Consumption: Same as for AC mo ...

  • GarrettCom 6K32FR - page 71

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) B3.0 APPLICATIONS FOR DC POWERED SWITCHES Magnum 6K32F Series Fiber Switches ar e easily installed in a variety of applications where -48VDC, 24VDC and 125VDC power is used as the primary power source. The- 48VDC, 24VDC and 125VDC power configuration provides an Ethernet net ...

  • GarrettCom 6K32FR - page 72

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 66 www Garr e t t C om com .. Note: The GND should be hooked up first. The 6K32F unit has a floating ground, so the user may elect to Grou nd either + or - ter minal to suit the customer ’s use. Before connecting hot lin es to the Terminal Bl ock of –48VDC, 24VDC or 125V ...

  • GarrettCom 6K32FR - page 73

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) APPENDIX C: Internal DC Dual-Source Power Option C1.0 SPECIFICATIONS - FOR MAG NUM 6K32F SERIES FIBER SWITCH Power Supply (Internal, -48VDC Dual -Source, model # Dual-Src-48V) DC Power Connector: First Source: “A+”, “A -“ , 2nd Source “B - “, “B+” GND: Termin ...

  • GarrettCom 6K32FR - page 74

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) C3.0 DUAL-SOURCE OPTION, THEORY OF OPERATION The Dual-Source DC power option is designed using diodes inside of the chassis on each DC power input line. A diode is placed in each of the four input lines (behind the four external power connection te rminals) so that power fro ...

  • GarrettCom 6K32FR - page 75

    Magnum 6K32F/FR/FC/FRC Managed Switch In stallation and User Guide (05/08) 69 www Garr e t t C om com .. Note: The GND should be hooked up first. The 6K32F Series units have a floating ground, so th e user may elect to Ground eith er + or - terminal to suit th e customer’s use. Before connecting hot lin es to the Terminal Bl ock of –48VDC, 24VD ...

Manufacturer GarrettCom Category Network Router

Documents that we receive from a manufacturer of a GarrettCom 6K32FR can be divided into several groups. They are, among others:
- GarrettCom technical drawings
- 6K32FR manuals
- GarrettCom product data sheets
- information booklets
- or energy labels GarrettCom 6K32FR
All of them are important, but the most important information from the point of view of use of the device are in the user manual GarrettCom 6K32FR.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals GarrettCom 6K32FR, service manual, brief instructions and user manuals GarrettCom 6K32FR. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product GarrettCom 6K32FR.

Similar manuals

A complete manual for the device GarrettCom 6K32FR, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use GarrettCom 6K32FR by users. Manuals are usually written by a technical writer, but in a language understandable to all users of GarrettCom 6K32FR.

A complete GarrettCom manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual GarrettCom 6K32FR - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the GarrettCom 6K32FR, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the GarrettCom 6K32FR, that we can find in the current document
3. Tips how to use the basic functions of the device GarrettCom 6K32FR - which should help us in our first steps of using GarrettCom 6K32FR
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with GarrettCom 6K32FR
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of GarrettCom 6K32FR in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning GarrettCom 6K32FR?

Use the form below

If you did not solve your problem by using a manual GarrettCom 6K32FR, ask a question using the form below. If a user had a similar problem with GarrettCom 6K32FR it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)