English dropdown-ico

Manual Cognitive Solutions A799

142 pages 2.47 mb
Download

Go to site of 142

Summary
  • Cognitive Solutions A799 - page 1

    Includes TPG LogoEZ ® colorization inf ormation P r ogr amming G uide A799 T w o -Color Thermal Rec eipt Printer Made under one or more of the following U .S. patents: 4886381, 5579043, 5613787, 5651624, 5713678, 5752779, 5789916, 5800080, 5879090, 5887999, 5975776, 6027266, 6085973, 6089450, 6129465, 6155483, 6404452, 6486902, 6504331, 5749277, 6 ...

  • Cognitive Solutions A799 - page 2

    Changes or modications to this unit not expressly appr oved by the party responsible for compliance could v oid the user ’ s authority to operate the equipmen t. Note This equipment has been tested and f ound to comply with the limits for a Class A digital de vice, pursuan t to Part 15 of the FCC Rules. These limits are designed to provide r e ...

  • Cognitive Solutions A799 - page 3

    A799 Prog ramming Guide Cont ents 3 Revision D 12/09 A799-PG00001D C ontents Chapter 1: About this Guide ................................................................. 9 How to use this guide ......................................................................... 9 Where to nd the basics ..................................................... ...

  • Cognitive Solutions A799 - page 4

    A799 Prog ramming Guide Cont ents 4 Revision D 12/09 A799-PG00001D Chapter 4: Progr amming Commands ................................................ 29 Commands listed b y func tion .......................................................... 29 Printer actions ................................................................................... 29 Pri ...

  • Cognitive Solutions A799 - page 5

    A799 Prog ramming Guide Cont ents 5 Revision D 12/09 A799-PG00001D V er tical and horizontal positioning .................................................45 Horizontal tab ..................................................................................................... 45 Set horizontal and vertical minimum motion units ........................ ...

  • Cognitive Solutions A799 - page 6

    A799 Prog ramming Guide Cont ents 6 Revision D 12/09 A799-PG00001D Graphics ............................................................................................. 64 Download BMP logo ........................................................................................ 64 Select bit image mode ............................................. ...

  • Cognitive Solutions A799 - page 7

    A799 Prog ramming Guide Cont ents 7 Revision D 12/09 A799-PG00001D Real time request to printer ........................................................................... 93 Real time printer status transmission ......................................................... 94 Real time commands disabled ................................................ ...

  • Cognitive Solutions A799 - page 8

    A799 Prog ramming Guide Cont ents 8 Revision D 12/09 A799-PG00001D Return microprocessor CRC ......................................................................... 117 Erase all ash contents e xcept boot sector ............................................ 118 Return main program ash CRC ..................................................... ...

  • Cognitive Solutions A799 - page 9

    Chapter 1: About this Guide 9 Revision D 12/09 A799-PG00001D Chapter 1: A bout this Guide How t o use this guide This is a supplemental guide providing programming information on CognitiveTPG’ s A799 printer . It is written for tech- savvy users who are interested in customizing or adjusting printer functionality and is meant to be used in conjun ...

  • Cognitive Solutions A799 - page 10

    A799 Prog ramming Guide Chapter 1: About this Guide 10 Revision D 12/09 A799-PG00001D ...

  • Cognitive Solutions A799 - page 11

    Chapter 2: Diagnostics and Congur ation 11 Revision D 12/09 A799-PG00001D Chapter 2: Diagnostics and C onguration The A799 printer performs a number of diagnostics that provide useful information about the operating status of the printer . The following diagnostic tests are available. • Start-up diagnostics Performed during the printer ’ ...

  • Cognitive Solutions A799 - page 12

    Chapter 2: Diagnostics and Congur ation 12 Revision D 12/09 A799-PG00001D Runtime diagnostics Runtime diagnostics (sometimes called level 2 diagnostics) run during normal printer operation. When the following conditions occur , the printer automatically turns off the appropriate motors and disables printing to prevent damage to the printer: • ...

  • Cognitive Solutions A799 - page 13

    Chapter 2: Diagnostics and Congur ation 13 Revision D 12/09 A799-PG00001D For mor e information about See this section Accessing the r emote diagnostic tallies “Command descriptions ” in Chapter 4: Programming commands (Status commands: T ransmit printer ID, r emote diagnostics extension, Hexadecimal 1D 49 40 n) Print test and conguration ...

  • Cognitive Solutions A799 - page 14

    Chapter 2: Diagnostics and Congur ation 14 Revision D 12/09 A799-PG00001D Indicators The printer communicates various conditions both visually , with the green LED or audibly , with a series of tones or beeps. The following table lists these indicators. Indicator Sequence Condition LED Continuous, ashing quickly Paper out Cov er o Knife un ...

  • Cognitive Solutions A799 - page 15

    Chapter 2: Diagnostics and Congur ation 15 Revision D 12/09 A799-PG00001D Print er conguration Printers are shipped with all the functions and parameters preset at the factory . Settings for various printer parameters can be changed. This menu is printed on the receipt and scrolls through instructions for selecting and changing any of the fun ...

  • Cognitive Solutions A799 - page 16

    Chapter 2: Diagnostics and Congur ation 16 Revision D 12/09 A799-PG00001D Conguring the prin ter The conguration menu allows you to select functions or change various settings for the printer . Instructions printed on the receipt guide you through the processes. Caution: Be extr emely careful changing any of the printer settings to avoid c ...

  • Cognitive Solutions A799 - page 17

    Chapter 2: Diagnostics and Congur ation 17 Revision D 12/09 A799-PG00001D Communica tion interface T o change the communication interface settings, enter the conguration menu, select “Set Communication Interface” from the main menu and answer “Y es” to “SET INTERF ACE TYPE?” printed on the receipt. Caution: Be extr emely careful c ...

  • Cognitive Solutions A799 - page 18

    Chapter 2: Diagnostics and Congur ation 18 Revision D 12/09 A799-PG00001D Diagnostic modes T o change the diagnostic modes enter the conguration menu, select “Set Diagnostic Modes” from the main menu and select one of the following modes: • Normal: normal operating mode of the printer . • Datascope: the receipt printer prints incoming ...

  • Cognitive Solutions A799 - page 19

    Chapter 2: Diagnostics and Congur ation 19 Revision D 12/09 A799-PG00001D Enable or disable receipt t est mo de The receipt test mode veries proper receipt printing. Receipt test is enabled and disabled by selecting the “Diagnostic Modes” sub-menu of the conguration menu. See “Conguring the printer”, page 16 for instructions on ...

  • Cognitive Solutions A799 - page 20

    Chapter 2: Diagnostics and Congur ation 20 Revision D 12/09 A799-PG00001D Printer settings and functions T o change the printer settings and functions, enter the conguration menu, select the sub-menu from the main menu and answer the questions printed on the receipt until you come to the instructions for selecting the printer settings. Cautio ...

  • Cognitive Solutions A799 - page 21

    Chapter 2: Diagnostics and Congur ation 21 Revision D 12/09 A799-PG00001D Select the hardware options sub-menu to set: • Printhead setting This setting is the printhead energy rating and must match the rating marked on the front right of the thermal mechanism in the printer . Whenever a new thermal mechanism is installed, this setting must mat ...

  • Cognitive Solutions A799 - page 22

    Chapter 2: Diagnostics and Congur ation 22 Revision D 12/09 A799-PG00001D ...

  • Cognitive Solutions A799 - page 23

    Chapter 3: Pr ogramming the Printer 23 Revision D 12/09 A799-PG00001D Chapter 3: P rogramming the Prin ter Overview of commands Commands control all operations and functions of the printer . This includes selecting the size and placement of characters and graphics on the receipt to feeding and cutting the paper . The programming commands have been ...

  • Cognitive Solutions A799 - page 24

    Chapter 3: Pr ogramming the Printer 24 Revision D 12/09 A799-PG00001D Command Description Dierence betw een previous product and new product emulation mode. 1B 4A n Print and f eed paper This command uses n in terms of n/360 inches. Sinc e the A793 had a fundamental st ep of 1/152 inch and the A799 has a fundamental st ep of 1/203 inch, the actu ...

  • Cognitive Solutions A799 - page 25

    Chapter 3: Pr ogramming the Printer 25 Revision D 12/09 A799-PG00001D TPG ColorPOS ® tw o- color and color int erpreted commands (continued) Hexadecimal ASCII Description 1D 8C n m GS 0x8C n m Merge watermark mode 1D 8D n m GS 0x8D n m T ex t strike through mode 1D 90 m x y o p q GS 0x8A m x y o p q F orm and print real time surround graphic 1D 91 ...

  • Cognitive Solutions A799 - page 26

    Chapter 3: Pr ogramming the Printer 26 Revision D 12/09 A799-PG00001D Character appearanc e The appearance of text can be changed using the following print modes: • Standard • Compressed • Double-high • Double-wide • Upside-down • Rotated • Underlined • Bold • Reverse • Italic • Strike-through • Scaled • Shading W idth spe ...

  • Cognitive Solutions A799 - page 27

    Chapter 3: Pr ogramming the Printer 27 Revision D 12/09 A799-PG00001D Print z ones for 82.5mm paper Specications of print zone for 82.5 mm paper: • 640 dots (addressable) @ 8 dots/mm, centered on 82.5mm • Standard mode: minimum margins: 1.0mm (0.040 inches) • T op margin to manual tear-of f: 17.8mm (0.70 inches) • T op margin to knife cu ...

  • Cognitive Solutions A799 - page 28

    Chapter 3: Pr ogramming the Printer 28 Revision D 12/09 A799-PG00001D Emulation modes The CognitiveTPG A799 printer may be operated in a number of different emulation modes. However , printing characteristics and defaults may differ , depending on the desired mode. For instance, two-color paper and ColorPOS ® commands and features are available on ...

  • Cognitive Solutions A799 - page 29

    Chapter 4: Pr ogramming Commands 29 Revision D 12/09 A799-PG00001D Chapter 4: P rogramming C ommands C ommands listed by function Printer actions Code (he xadecimal) Command Page 10 Clear printer 35 19 Perform full knife cut (or code 1B 69) 36 1A Perform partial k nife cut (or code 1B 6D) 36 1B 07 Generate tone 36 1B 3D n Select peripheral device ( ...

  • Cognitive Solutions A799 - page 30

    Chapter 4: Pr ogramming Commands 30 Revision D 12/09 A799-PG00001D V er tical and horizontal positioning Code (he xadecimal) Command Page 09 Horizontal tab 45 1B 14 n Set column 45 1B 24 n L n H Set absolute starting position 46 1B 32 Set vertical line spacing to 1/6 inch 46 1B 33 n Set ver tical line spacing 47 1B 44 [ n ] k 00 Set horizontal tab ...

  • Cognitive Solutions A799 - page 31

    Chapter 4: Pr ogramming Commands 31 Revision D 12/09 A799-PG00001D 1D 8D n m T ex t strike -through mode 62 1D F0 01 n Select font ID number 62 1D F0 02 n Select font style number 62 1D F0 03 Save f ont ID number as default font at po wer up 63 1D F0 80 Download font 63 1D F0 C0 02 Download font list 63 1F 05 n S elect supersctipt or subscr ipt mod ...

  • Cognitive Solutions A799 - page 32

    Chapter 4: Pr ogramming Commands 32 Revision D 12/09 A799-PG00001D 1F 03 16 f s p/r t LogoEZ ® colorization 77 1F 03 17 a m s LogoEZ ® attribute mapping 79 1F 04 n Convert 6- dots/mm bitmap to 8 dots/mm bitmap 81 1F 7B n Enable constant speed logos 81 Status Batch mode Code (he xadecimal) Command Page 1B 75 0 T ransmit peripheral device status (R ...

  • Cognitive Solutions A799 - page 33

    Chapter 4: Pr ogramming Commands 33 Revision D 12/09 A799-PG00001D 1D 71 a b c d e f L f H Set GSI Databar (formerly RSS) parameters 103 1D 77 n Select bar code width 104 Page mode Code (he xadecimal) Command Page 0C Print and return t o standard mode 105 18 Cancel print data in page mode 105 1B 0C P rint data in page mode 105 1B 4C Select page mod ...

  • Cognitive Solutions A799 - page 34

    Chapter 4: Pr ogramming Commands 34 Revision D 12/09 A799-PG00001D Flash do wnload Code (he xadecimal) Command Page 1B 5B 7D Switch to ash download mode 116 1D 00 Return boot sector rmware part number 116 1D 01 Return segment number status of ash memory 117 1D 02 nn Selec t ash memory sec tor to download 117 1D 06 Get rmware CRC 117 ...

  • Cognitive Solutions A799 - page 35

    Chapter 4: Pr ogramming Commands 35 Revision D 12/09 A799-PG00001D C ommand con ventions The following information describes how each command is organized: Name: Name of command. ASCII: The ASCII c ontrol code. Hexadecimal: The hexadecimal control code. Decimal: The decimal contr ol code. V alue: A description of the command operands. Range: The up ...

  • Cognitive Solutions A799 - page 36

    Chapter 4: Pr ogramming Commands 36 Revision D 12/09 A799-PG00001D Perform full knife cut ASCII EM ESC i Hexadecimal 19 1B 69 Decimal 25 27 105 Cuts the receipt. There are two codes (Hex 19 or 1B 69) for this command and both perform the same function. Exc eptions The full cut is replaced by a partial cut in the A793 emulation. ASCII EM, (0x19) is ...

  • Cognitive Solutions A799 - page 37

    Chapter 4: Pr ogramming Commands 37 Revision D 12/09 A799-PG00001D Initialize printer ASCII ESC @ Hexadecimal 1B 40 Decimal 27 64 Default: Character pitch: 15.6 CPI Column width: 44 characters Extra dot rows: 3 Character set: Code P age 437 Printing position: Column One Clears the print line buffer and resets the printer to the default settings for ...

  • Cognitive Solutions A799 - page 38

    Chapter 4: Pr ogramming Commands 38 Revision D 12/09 A799-PG00001D Select sensors to stop printing ASCII ESC c 4 n Hexadecimal 1B 63 34 n Decimal 27 99 52 n V alue of n: Sensor status Sensor Status Bit Sensor 0 1 0 Receipt paper near-end Disabled Enabled 1 Receipt paper near-end Disabled Enabled 2–4 Undened 6 Undened Bits 5 and 7 are not us ...

  • Cognitive Solutions A799 - page 39

    Chapter 4: Pr ogramming Commands 39 Revision D 12/09 A799-PG00001D Set current color ASCII ESC r m Hexadecimal 1B 72 m Decimal 27 114 m Default of m: 0 (monochrome) This command will set the current color to the color m for all character data that may follow this command and all graphic objects (bit images) that have not been explicitly loaded as t ...

  • Cognitive Solutions A799 - page 40

    Chapter 4: Pr ogramming Commands 40 Revision D 12/09 A799-PG00001D Set paper type (ColorPOS ® ) ASCII GS 0x81 m n Hexadecimal 1D 81 m n Decimal 29 129 m n V alue of m: 0 = monochrome (black) paper (K anzaki P310) 1 = two- color (red/black) papers (K anzaki P310RB) 4 = two- color (blue/black) papers (K anzaki P320BB) 5 = two- color (red/black) pape ...

  • Cognitive Solutions A799 - page 41

    Chapter 4: Pr ogramming Commands 41 Revision D 12/09 A799-PG00001D Fon t and lines p er inch (LPI) setup for dier ent emulations Emulation LPI Fon t(s) F ont Default Default C omments Mode Options Options Size LPI EDR A799 native 6.00, 6.77, 7.52, 8.13 Standard 13x24 7.52 3 Default setup for monochrome paper T all 13x27 6.77 3 ColorPOS ® 13x27 ...

  • Cognitive Solutions A799 - page 42

    Chapter 4: Pr ogramming Commands 42 Revision D 12/09 A799-PG00001D Print and paper f eed The print and feed commands control printing on the receipt and paper feed by the printer . Print and f eed paper one line ASCII LF Hexadecimal 0A Decimal 10 Prints one line from the buffer and feeds paper one line. Carriage return/line feed pair prints and fee ...

  • Cognitive Solutions A799 - page 43

    Chapter 4: Pr ogramming Commands 43 Revision D 12/09 A799-PG00001D Add n e xtra dot row s ASCII SYN n Hexadecimal 16 n Decimal 22 n V alue of n: Number of extra dot rows Range of n: 0–16 Default: 3 extra dot rows Adds n extra dot rows ( n /8 mm , n /203 inch) to the character height to increase space between print lines or decrease the number of ...

  • Cognitive Solutions A799 - page 44

    Chapter 4: Pr ogramming Commands 44 Revision D 12/09 A799-PG00001D Print and f eed paper ASCII ESC J n Hexadecimal 1B 4A n Decimal 27 74 n V alue of n: n /203 inch in A799 native mode, A794 emulation and Application C ompatible Escape Commands emulation mode; n /360 inch in A793 emulation mode Range of n: 0–255 Prints one line from the buffer and ...

  • Cognitive Solutions A799 - page 45

    Chapter 4: Pr ogramming Commands 45 Revision D 12/09 A799-PG00001D V er tical and horizontal positioning The horizontal positioning commands control the horizontal print positions of characters on the receipt. The commands describe operation for 80mm paper . If the printer supports 82.5mm paper , the dot spacing is the same but there are 640 printa ...

  • Cognitive Solutions A799 - page 46

    Chapter 4: Pr ogramming Commands 46 Revision D 12/09 A799-PG00001D Set absolute starting p osition ASCII ESC $ n L n H Hexadecimal 1B 24 n L n H Decimal 27 36 n L n H V alue of n: n = Number of dots to be moved from the beginning of the line . n L = Remainder after dividing n by 256. n H = Integer after dividing n by 256. The values for n L and n H ...

  • Cognitive Solutions A799 - page 47

    Chapter 4: Pr ogramming Commands 47 Revision D 12/09 A799-PG00001D Set vertical line spacing ASCII ESC 3 n Hexadecimal 1B 33 n Decimal 27 51 n V alue of n: n /406 inch in A799 native mode, A794 emulation n /360 inch in A793 emulation mode n/203 inch in Application Compatible Escape C ommands emulation mode Range of n: 0-255 Default: 3.37 mm (0.13 i ...

  • Cognitive Solutions A799 - page 48

    Chapter 4: Pr ogramming Commands 48 Revision D 12/09 A799-PG00001D Set relative prin t p osition ASCII ESC n1 n2 Hexadecimal 1B 5C n1 n2 Decimal 27 92 n1 n2 V alue of n: T o move the relative starting position right of the current position: n = Number of dots to be moved right of the curr ent position n1 = Remainder after dividing n by 256 n2 = I ...

  • Cognitive Solutions A799 - page 49

    Chapter 4: Pr ogramming Commands 49 Revision D 12/09 A799-PG00001D previous data. This behavior can be used to an application’ s advantage to provide the ability to create compound characters on the receipt station. This command also functions differently in the A793 emulation when used in graphics: n x 2 = Number of dots to be moved fr om the be ...

  • Cognitive Solutions A799 - page 50

    Chapter 4: Pr ogramming Commands 50 Revision D 12/09 A799-PG00001D Set printing area width ASCII GS W nL nH Hexadecimal 1D 57 nL nH Decimal 29 87 nL nH Range of nL: 0–255 Range of nH: 0–255 Default: 576 dots (the maximum printable area) Sets the width of the printing area. If the setting exceeds the printable area, the maximum value of the prin ...

  • Cognitive Solutions A799 - page 51

    Chapter 4: Pr ogramming Commands 51 Revision D 12/09 A799-PG00001D T ext characteristics commands These commands control what the printed information looks like, selection of character sets, denition of custom-dened characters, and setting of margins. The commands are described in order of their hexadecimal codes. The commands describe operat ...

  • Cognitive Solutions A799 - page 52

    Chapter 4: Pr ogramming Commands 52 Revision D 12/09 A799-PG00001D Select pitch (column width) ASCII ESC SYN n Hexadecimal 1B 16 n Decimal 27 22 n V alue of n: 0 = Standard pitch 1 = Compressed pitch Default: 0 (Standard pitch) Selects the character pitch for a print line. Formulas The following table provides the print characteristics for both pit ...

  • Cognitive Solutions A799 - page 53

    Chapter 4: Pr ogramming Commands 53 Revision D 12/09 A799-PG00001D Select print mode ASCII ESC ! n Hexadecimal 1B 21 n Decimal 27 33 n V alue of n: Pitch selection (standard , compressed, double high, or double wide .) V alue of n Bit 1 F unction 0 1 Bit 0 Pitch 2 Standard Compressed (See char t below) pitch pitch Bit 3 Emphasized mode Canceled Set ...

  • Cognitive Solutions A799 - page 54

    Chapter 4: Pr ogramming Commands 54 Revision D 12/09 A799-PG00001D Select or c ancel user-dened character set ASCII ESC % n Hexadecimal 1B 25 n Decimal 27 37 n V alue of n: 0 = Code P age 437 1 = User Dened (RAM) 2 = Code P age 850 Range of n: 0–2 Default: 0 (C ode Page 437) Selects the character set. When an undened RAM character is sel ...

  • Cognitive Solutions A799 - page 55

    Chapter 4: Pr ogramming Commands 55 Revision D 12/09 A799-PG00001D Dene extended user-dened character set ASCII US & s c1 c2 [char ac ter 1 data] ... [char acter k data] Hexadecimal 1F 26 s c1 c2 [char acter 1 data] ... [character k data] Decimal 31 38 s c1 c2 [character 1 data] ... [ character k data] V alues and ranges: s = the number o ...

  • Cognitive Solutions A799 - page 56

    Chapter 4: Pr ogramming Commands 56 Revision D 12/09 A799-PG00001D Cop y character set from ROM to RAM ASCII ESC : 0 0 0 Hexadecimal 1B 3A 30 30 30 Decimal 27 58 0 0 0 Default: Current active ROM code page Copies characters in the active ROM set to RAM. Use this command to re-initialize the user-dened character set. Code page 437 is copied by de ...

  • Cognitive Solutions A799 - page 57

    Chapter 4: Pr ogramming Commands 57 Revision D 12/09 A799-PG00001D Select or c ancel double-strike ASCII ESC G n Hexadecimal 1B 47 n Decimal 27 71 n V alue of n: 0 = O  1 = On ( When 0 and 1 are the least signicant bit, LSB) Default: 0 (O ) T urns double-strike mode on or off. Identical to emphasized mode. The printer is reset to the stand ...

  • Cognitive Solutions A799 - page 58

    Chapter 4: Pr ogramming Commands 58 Revision D 12/09 A799-PG00001D Select international character code ASCII ESC R n Hexadecimal 1B 52 n Decimal 27 82 n V alue of n: A799 native mode A793 emulation Application Compatible Escape C ommand emulation (1B 52 n only) 0 = Code P age 437 0 = Code P age 437 0 = U.S.A. 1 = Code P age 850 Not 0 = Code P age 8 ...

  • Cognitive Solutions A799 - page 59

    Chapter 4: Pr ogramming Commands 59 Revision D 12/09 A799-PG00001D Select international character set ASCII: ESC t n Hexadecimal: 1B 74 n Decimal: 27 116 n V alue of n: A799 native mode A793 emulation emulation 0 = Code P age 437 0 = Code P age 437. 1 = Code P age 850 Not 0 = Code P age 850 2 = Code P age 852 3 = Code P age 860 4 = Code P age 863 5 ...

  • Cognitive Solutions A799 - page 60

    Chapter 4: Pr ogramming Commands 60 Revision D 12/09 A799-PG00001D Select charac ter size ASCII GS ! n Hexadecimal 1D 21 n Decimal 29 33 n V alue of n : 1–8 = vertical number of times ac tive font 1–8 = horizontal number of times active font Range of n : 00–07, 10–17, ...70–77 Default of n : 11 hexadecimal Selects the character height usi ...

  • Cognitive Solutions A799 - page 61

    Chapter 4: Pr ogramming Commands 61 Revision D 12/09 A799-PG00001D T urns on white/black reverse print mode. In white/black reverse print mode, print dots and non-print dots are reversed, which means that white characters are printed on a black background. When the white/black reverse print mode is selected it is also applied to character spacing w ...

  • Cognitive Solutions A799 - page 62

    Chapter 4: Pr ogramming Commands 62 Revision D 12/09 A799-PG00001D T ext strike-through mode (C olorPOS ® ) ASCII GS 0x85 m n Hexadecimal 1D 8D n m Decimal 29 141 n m V alue of m: 0 = retain same color as the character itself 1 = black 2 = paper color V alue of n: standard cell height Default: n = 0 (o ) Prints a strike-through over characters. ...

  • Cognitive Solutions A799 - page 63

    Chapter 4: Pr ogramming Commands 63 Revision D 12/09 A799-PG00001D Save f ont ID number as default font at power up ASCII GS 0xF0 0x03 Hexadecimal 1D F0 03 Decimal 29 240 3 Save current font ID number as default font at power up. All characters will be printed from the downloaded font. Download font ASCII GS 0xF0 0x80 follow ed by le Hexadecimal ...

  • Cognitive Solutions A799 - page 64

    Chapter 4: Pr ogramming Commands 64 Revision D 12/09 A799-PG00001D Select ac tive user-dened character set Selects user-dened character set number for download or printing. The default at power on is 0. ASCII US i n Hexadecimal 1F 69 n Decimal 31 105 n n = 0 - 127 Set high order bit of n to congure user-dened character set number as the ...

  • Cognitive Solutions A799 - page 65

    Chapter 4: Pr ogramming Commands 65 Revision D 12/09 A799-PG00001D Select bit image mo de ASCII ESC * m n 1 n 2 d 1 ... d n Hexadecimal 1B 2A m n 1 n 2 d 1 ... d n Decimal 27 42 m n 1 n 2 d 1 ... d n V alue of m : V alue of m Mode No. of dots (v er tical) No . of dots (horizontal) No . of dots/line 0 8-dot single - density 8 (68 DPI) 0–288 (101 D ...

  • Cognitive Solutions A799 - page 66

    Chapter 4: Pr ogramming Commands 66 Revision D 12/09 A799-PG00001D Print advanc ed raster graphics ASCII ESC . m n rL rH d1 … dn Hexadecimal 1B 2E m n rL rH d1 … dn Decimal 27 46 m n rL rH d1 … dn V alue of m: horizontal oset from left margin = 8 x m dots V alue of n : number of data bytes that compose the raster V alue of r : number of ti ...

  • Cognitive Solutions A799 - page 67

    Chapter 4: Pr ogramming Commands 67 Revision D 12/09 A799-PG00001D Select the current logo ASCII GS # n Hexadecimal 1D 23 n Decimal 29 35 n Range of n: 0 – 255 Default: 0 Selects a color or monochrome logo to be dened or printed. The active logo n remains in use until this command is sent again with a different logo n . When this command prece ...

  • Cognitive Solutions A799 - page 68

    Chapter 4: Pr ogramming Commands 68 Revision D 12/09 A799-PG00001D Dene downloaded bit image ASCII GS * n 1 n 2 d 1 ... dn ] Hexadecimal 1D 2A n 1 n 2 d 1 ... dn ] Decimal 29 42 n 1 n 2 d 1 ... dn ] V alue of n: V alue of n 1 V alue of n 2 V alue of d 1–72 (8 x n1 = number of 1–64 (number of vertical bytes) Bytes of data (printed do wn, then ...

  • Cognitive Solutions A799 - page 69

    Chapter 4: Pr ogramming Commands 69 Revision D 12/09 A799-PG00001D Print downloaded bit image ASCII GS / m Hexadecimal 1D 2F m Decimal 29 47 m V alue and range of m: This command is used to print a previously stored monochrome or color logo from printer memory on the receipt station. The logo is identied as the one indicated by the most recent s ...

  • Cognitive Solutions A799 - page 70

    Chapter 4: Pr ogramming Commands 70 Revision D 12/09 A799-PG00001D Print r aster monochrome graphics ( ColorPOS ® ) ASCII GS 0x82 n1…..n72 (576 dots) for 80 mm paper , or n80 (640 dots) for 82.5 mm paper Hexadecimal 1D 82 n1…..n72 (576 dots) for 80 mm paper , or n80 (640 dots) for 82.5 mm paper Decimal 29 130 n1…..n72 (576 dots) for 80 mm pa ...

  • Cognitive Solutions A799 - page 71

    Chapter 4: Pr ogramming Commands 71 Revision D 12/09 A799-PG00001D Download logo image ( ColorPOS ® ) ASCII GS 0x84 m n1 n2 d1…..dx , x = (n1 * n2*8 ) * m Hexadecimal 1D 84 m n1 n2 d1…..dx , x = (n1 * n2*8 ) * m Decimal 29 132 m n1 n2 d1…..dx , x = (n1 * n2*8 ) * m V alue of m: 1 = monochrome 2 = two- color Max n1 = 576/8 for 80mm paper 640/ ...

  • Cognitive Solutions A799 - page 72

    Chapter 4: Pr ogramming Commands 72 Revision D 12/09 A799-PG00001D Apply shading to logo ( ColorPOS ® ) ASCII GS Ox8B n m o Hexadecimal 1D 8B n m o Decimal 29 139 n m o This command will apply shading effect m to logo n and store it at index o , also extending width to full horizontal size if logo n is not at full paper width. n must be the index ...

  • Cognitive Solutions A799 - page 73

    Chapter 4: Pr ogramming Commands 73 Revision D 12/09 A799-PG00001D Color shade mode ( ColorPOS ® ) ASCII GS 0x87 m Hexadecimal 1D 87 m Decimal 29 135 m This applies a mixing of color into any monochrome objects such as text and monochrome logos. Rather than fading away , this mode transitions a character or logo from the current color in which it ...

  • Cognitive Solutions A799 - page 74

    Chapter 4: Pr ogramming Commands 74 Revision D 12/09 A799-PG00001D The geometric location points for this graphic are dened by a rectangular area start position of x bytes from the left edge and y bytes from the top of the new line and times o bytes wide times p bytes in length. For the case of m =3 (star), the value passed for o is also used as ...

  • Cognitive Solutions A799 - page 75

    Chapter 4: Pr ogramming Commands 75 Revision D 12/09 A799-PG00001D Apply margin message mode ( ColorPOS ® ) ASCII GS 0x99 l m n o Hexadecimal : 1D 99 l m n o Decimal: 29 155 l m n o V alue of l : l is a binar y switch: l = 0 disables margin message merging l = 1 enable left margin message merging l = 2 enable right margin message merging l > 2 ...

  • Cognitive Solutions A799 - page 76

    Chapter 4: Pr ogramming Commands 76 Revision D 12/09 A799-PG00001D Logo print with knife cut ASCII GS 0x9B m n Hexadecimal 1D 9B m n Decimal 29 155 m n V alues of m: 0 = Standard size 1 = Double wide 2 = Double high 3 = Double high/wide V alue of n: 01 - FF (Hex) # dot rows = n x 24 n = 5 is the recommended setting Because the printhead and cutting ...

  • Cognitive Solutions A799 - page 77

    Chapter 4: Pr ogramming Commands 77 Revision D 12/09 A799-PG00001D Set LogoEZ ® colorization ASCII US ET X SYN f s p/t t Hexadecimal 1F 03 16 f s p/t t Decimal 31 03 22 f s p/t t V alue of f: 0 = turn o all LogoEZ ® colorization features 1 = link print logo after knife cut 2 = link watermark printing 3 = link margin message printing 4 = link l ...

  • Cognitive Solutions A799 - page 78

    Chapter 4: Pr ogramming Commands 78 Revision D 12/09 A799-PG00001D f = 2 link watermark printing Example: Activate watermark printing using logo #F1 (1F 03 16 02 s r ) with “ s ” being the skip distance in dot rows before activation and “r ” is the distance in mm between watermark repetitions. After executing a knife-cut command and the f = ...

  • Cognitive Solutions A799 - page 79

    Chapter 4: Pr ogramming Commands 79 Revision D 12/09 A799-PG00001D f = 4 link logo print bef ore cut Prints a logo after the skip distance of “ s ” before a logo and “ p ” past a logo and performs a knife cut (1F 03 16 04 s p ). Immediately before executing a knife-cut command, if s > 0, execute the following: • skip (feed paper) “ s ...

  • Cognitive Solutions A799 - page 80

    Chapter 4: Pr ogramming Commands 80 Revision D 12/09 A799-PG00001D A word (2 bytes) is used to identify the attribute mapping, with “ m” bits 0 – 6 identifying which original attributes should be mapped: Original attribute mapped table m bit on attribute mapped 0 B old 1 I talic 2 Reverse 3 Underline 4 Double high 5 Double wide 6 Compressed p ...

  • Cognitive Solutions A799 - page 81

    Chapter 4: Pr ogramming Commands 81 Revision D 12/09 A799-PG00001D Related informa tion This command is utilized in the TPG LogoEZ ® utility . The utility can be used to pre-congure new printers with a default colorization setup without requiring any application changes. The default setup was designed to provide a general level of colorization ...

  • Cognitive Solutions A799 - page 82

    Chapter 4: Pr ogramming Commands 82 Revision D 12/09 A799-PG00001D Status Status command in troduc tion The A799 has three methods of providing status to the application. These methods are through batch status commands, real time status commands and unsolicited status mode. An application may use one or more of these methods to understand the curre ...

  • Cognitive Solutions A799 - page 83

    Chapter 4: Pr ogramming Commands 83 Revision D 12/09 A799-PG00001D Request alternate sta tus (A793 emula tion only) ASCII ESC u n Hexadecimal 1B 75 n Decimal 27 117 n V alue and Range of n: V alue of n Function Description 00 Drawer 1 High = Open Low = Closed or Not Presen t 01 Drawer 2 High = Open Low = Closed or Not Presen t 02 Paper Lo w High = ...

  • Cognitive Solutions A799 - page 84

    Chapter 4: Pr ogramming Commands 84 Revision D 12/09 A799-PG00001D T ransmit printer ID ASCII GS I n Hexadecimal 1D 49 n Decimal 29 73 n V alue of n: 1, 49 = Printer model ID 2, 50 = Type ID 3, 51 = ROM version ID 4, 52 = Logo Denition T ransmits the printer ID specied by n as follows: n Printer ID Specication ID (Hexadecimal) 1, 49 P rint ...

  • Cognitive Solutions A799 - page 85

    Chapter 4: Pr ogramming Commands 85 Revision D 12/09 A799-PG00001D T ransmit printer ID , remote diagnostics extension ASCII GS I @ n Hexadecimal 1D 49 40 n Decimal 29 73 64 n V alues of n: Refer to table Range of n: 32–255 (not all dened, but reserved) Eighteen remote diagnostic items are dened in the following table: eight printer ID item ...

  • Cognitive Solutions A799 - page 86

    Chapter 4: Pr ogramming Commands 86 Revision D 12/09 A799-PG00001D V alue of n (continued) ASCII Hex Dec Remote diagnostic item Function å 86 134 Knife cut tally Clear k nife cut tally to 0 ç 87 135 Knife cut tally Return k nife cut tally , returns 10 bytes É 90 144 Hours on tally , 8 digit ASCII numeric, Write to NVRAM max 99,999,999 æ 91 145 ...

  • Cognitive Solutions A799 - page 87

    Chapter 4: Pr ogramming Commands 87 Revision D 12/09 A799-PG00001D The status bytes to be transmitted are described in the three tables on the next page. Exc eptions Unlike the A793, that had a dedicated connector and resultant dedicated status reporting for each cash drawer , the A799 has a single connector that shares data reporting from either c ...

  • Cognitive Solutions A799 - page 88

    Chapter 4: Pr ogramming Commands 88 Revision D 12/09 A799-PG00001D Cash dra wer status (n = 2 or n = 50) Bit O/On Hex Decimal Status for tr ansmit status 0 O  00 0 One or both cash drawers open. On 01 1 Both cash drawers closed. 1 O  00 0 One or both cash drawers open. On 02 2 Both cash drawers closed. 2 – – – Undened 3 – – ? ...

  • Cognitive Solutions A799 - page 89

    Chapter 4: Pr ogramming Commands 89 Revision D 12/09 A799-PG00001D Real time commands The real time commands provide an application interface to the printer even when the printer is not handling other commands (RS-232C communication interface only): • Real time status transmission: GS (Hex 1D) sequence and DLE (Hex 10) sequence • Real time requ ...

  • Cognitive Solutions A799 - page 90

    Chapter 4: Pr ogramming Commands 90 Revision D 12/09 A799-PG00001D Moving data through the bu er Applications should not let the buffer ll up with real time commands when the printer is busy at the RS-232C interface. A busy condition at the RS-232C interface can be determined by bit 3 of the response to 1D 05, or 1D 04 1, or 10 04 1. The reas ...

  • Cognitive Solutions A799 - page 91

    Chapter 4: Pr ogramming Commands 91 Revision D 12/09 A799-PG00001D Exc eptions The command is ignored if n is out of range. An application using DLE (0x10) sequence must send EOT within 100 milliseconds of DLE or the printer will misinterpret the DLE and execute a clear printer command. A void this possibility by using the ID 04 n sequence, which i ...

  • Cognitive Solutions A799 - page 92

    Chapter 4: Pr ogramming Commands 92 Revision D 12/09 A799-PG00001D 3 = T ransmit error status Bit Status Hex Decimal Function 0 O  00 0 Fixed t o o . 1 On 02 2 Fix ed to on. 2 O  00 0 Fixed t o o . 3 O  00 0 No k nife error . On 08 8 Knife error occurred . 4 On 10 16 Fix ed to on. 5 O  00 0 No unrecoverable error . On 20 32 Unreco ...

  • Cognitive Solutions A799 - page 93

    Chapter 4: Pr ogramming Commands 93 Revision D 12/09 A799-PG00001D Real time request to printer GS sequence DLE sequence ASCII GS ET X n DLE ENQ n Hexadecimal 1D 03 n 10 05 n 29 3 n 16 5 n V alue of n : 1 = recov er and restar t 2 = recov er and clear buers The printer responds to a request from the host specied by n . This command includes t ...

  • Cognitive Solutions A799 - page 94

    Chapter 4: Pr ogramming Commands 94 Revision D 12/09 A799-PG00001D Real time printer status tr ansmission ASCII GS ENQ Hexadecimal 1D 05 Decimal 29 5 T ransmits one byte status of the printer in real time. V alue of byte: Bit Status Hex Decimal F unc tion 0 O 00 0 Paper adequate . On 01 1 Paper lo w (if paper low sensor enabled). 1 O 00 0 Pap ...

  • Cognitive Solutions A799 - page 95

    Chapter 4: Pr ogramming Commands 95 Revision D 12/09 A799-PG00001D Unsolicited status mode Select or c ancel unsolicited sta tus mode (USM) ASCII: GS a n Hexadecimal: 1D 61 n Decimal: 29 97 n V alue of n : 0 turns mode o ; any non-zero v alue turns mode on Default: 0 (USM disabled) Enables or disables automatic return of 4 status bytes whenever ...

  • Cognitive Solutions A799 - page 96

    Chapter 4: Pr ogramming Commands 96 Revision D 12/09 A799-PG00001D First Byt e (Printer Informa tion) Bit O/On Hex Decimal Status for USM 0 O  00 0 Not used. F ixed to o . 1 O  00 0 Not used. F ixed to o . 2 O  00 0 One or both cash drawers open. On 04 4 Both cash drawers closed. 3 O  00 0 Not busy at the RS232C interface. On 0 ...

  • Cognitive Solutions A799 - page 97

    Chapter 4: Pr ogramming Commands 97 Revision D 12/09 A799-PG00001D Third b yte (paper sensor information) Bit O/On Hex Decimal Status for USM 0 O  00 0 Receipt paper adequate On 01 1 Receipt paper low (if paper low sensor enabled) 1 O  00 0 Receipt paper present On 02 2 Receipt paper low (if paper low sensor enabled) 2 O  00 0 Receipt p ...

  • Cognitive Solutions A799 - page 98

    Chapter 4: Pr ogramming Commands 98 Revision D 12/09 A799-PG00001D Recognizing data from the prin ter An application sending various real time and non-real time commands to which the printer responds can determine which command a response belongs to by the table below . Responses to transmit peripheral device status (1B 75) and transmit paper senso ...

  • Cognitive Solutions A799 - page 99

    Chapter 4: Pr ogramming Commands 99 Revision D 12/09 A799-PG00001D Select pitch of HRI characters ASCII GS f n Hexadecimal 1D 66 n Decimal 29 102 n V alue of n: 0 = Standard P itch at 15 CPI 1 = Compressed P itch at 20 CPI Default: 0 (Standard P itch at 15 CPI) Selects standard and compressed font for printing bar code characters. Select bar code h ...

  • Cognitive Solutions A799 - page 100

    Chapter 4: Pr ogramming Commands 100 Revision D 12/09 A799-PG00001D V alues: First variation: String terminated with NUL character . Length k is not specied in command string; it depends on the bar code being printed. m Bar code d1...dk length 0 UPC-A 48–57 (ASCII numerals) Fixed length: 11, 12 1 UPC-E 48–57 Fix ed length: 11, 12 2 JAN13 (EA ...

  • Cognitive Solutions A799 - page 101

    Chapter 4: Pr ogramming Commands 101 Revision D 12/09 A799-PG00001D Print multiple barc odes ASCII GS k Hexadecimal 1D 6B FF n Decimal 29 108 255 All the individual barcode strings start with 1D 6B m, where m is the type of barcode. Use the same command to do multiple barcodes on one line. 1D 6B FF 01 begin multiple barcodes one line 1D 6B FF 00 en ...

  • Cognitive Solutions A799 - page 102

    Chapter 4: Pr ogramming Commands 102 Revision D 12/09 A799-PG00001D Print GS1 DataBar (f ormerly RSS), null terminated ASCII GS k n d1... 00 Hexadecimal 1D 6B n d1... 00 Decimal 29 107 n d1... 00 n Type 51 GS1 DataBar 52 GS1 DataBar truncated 53 GS1 DataBar stacked 54 GS1 DataBar stacked omni-direc tional 55 GS1 DataBar limited 56 GS1 DataBar expan ...

  • Cognitive Solutions A799 - page 103

    Chapter 4: Pr ogramming Commands 103 Revision D 12/09 A799-PG00001D Set GS1 DataBar (formerly RSS) paramet ers Setting of parameters for GS! DataBar ASCII GS q a b c d e fL fH Hexadecimal 1D 71 a b c d e fL fH Decimal 29 113 a b c d e fL fH a byte pixels per minimum unit, default 3, minimum 2, maximum 6 (value a applies to parameters b, c , d) b by ...

  • Cognitive Solutions A799 - page 104

    Chapter 4: Pr ogramming Commands 104 Revision D 12/09 A799-PG00001D Sample symbol description: Each PDF 417 symbol consists of 3 to 90 stacked rows surrounded on all four sides by a quiet zone. Each row contains: 1 Leading quiet zone 2 Start pattern 3 Left row indicator characters (code words) 4 One to thirty data characters (code words) 5 Right ro ...

  • Cognitive Solutions A799 - page 105

    Chapter 4: Pr ogramming Commands 105 Revision D 12/09 A799-PG00001D Page mode Page mode is one of two modes that the A799 printer uses to operate. Standard mode is typical of how most printers operate by printing data as it is received and feeding paper as the various paper feed commands are received. Page mode is different in that it processes or ...

  • Cognitive Solutions A799 - page 106

    Chapter 4: Pr ogramming Commands 106 Revision D 12/09 A799-PG00001D Select page mo de ASCII ESC L Hexadecimal 1B 4C Decimal 27 76 Switches from standard mode to page mode. After printing has been completed either by the print and return to standard mode (FF) command or select standard mode (1B 53) the printer returns to standard mode. The developed ...

  • Cognitive Solutions A799 - page 107

    Chapter 4: Pr ogramming Commands 107 Revision D 12/09 A799-PG00001D Select standard mode ASCII ESC S Hexadecimal 1B 53 Decimal 27 83 Switches from page mode to standard mode. In switching from page mode to standard mode, data buffered in page mode are cleared, the printing area set by set print area in page mode (1B 57) is initialized and the print ...

  • Cognitive Solutions A799 - page 108

    Chapter 4: Pr ogramming Commands 108 Revision D 12/09 A799-PG00001D Set print area in page mode ASCII ESC W n1, n2 ...n8 Hexadecimal 1B 57 n1, n2 ...n8 Decimal 27 87 n1, n2 ...n8 Range of n: 0-255 Default: n1 - 4 = 0 n5 = 64 n6 = 2 n7 = 64 n8 = 2 Sets the position and size of the printing area in page mode. The command can be sent multiple times so ...

  • Cognitive Solutions A799 - page 109

    Chapter 4: Pr ogramming Commands 109 Revision D 12/09 A799-PG00001D Set absolute vertical print position in page mode ASCII GS $ nL nH Hexadecimal 1D 24 nL nH Decimal 29 36 nL nH Sets the absolute vertical print starting position for buffer character data in page mode. The absolute print position is set to [( nL + nH X 256) x (vertical or horizonta ...

  • Cognitive Solutions A799 - page 110

    Chapter 4: Pr ogramming Commands 110 Revision D 12/09 A799-PG00001D Macros These commands are used to select and perform a user-dened sequence of printer operations. Select or c ancel macro denition ASCII GS : Hexadecimal 1D 3A Decimal 29 58 Starts or ends macro denition. Macro denition begins when this command is received during normal ...

  • Cognitive Solutions A799 - page 111

    Chapter 4: Pr ogramming Commands 111 Revision D 12/09 A799-PG00001D User da ta storage W rite to user data stor age ASCII ESC ‘ m a0 a1 a2 d1 ... dm Hexadecimal 1B 27 m a0 a1 a2 d1 ... dm Decimal 27 39 m a0 a1 a2 d1 ... dm V alue of m : 0 – 255 W rites m bytes of data to the user data storage ash page at the address specied. The printer w ...

  • Cognitive Solutions A799 - page 112

    Chapter 4: Pr ogramming Commands 112 Revision D 12/09 A799-PG00001D Select memor y type (SR AM/ash) where to sa ve logos or user-dened fonts ASCII GS “ n Hexadecimal 1D 22 n Decimal 29 34 n V alue of n: 48 – 53 n = 48 (ASCII n = 0) HEX 30 Loads active logo to RAM only . This is used to print a special logo but not have it take up ash m ...

  • Cognitive Solutions A799 - page 113

    Chapter 4: Pr ogramming Commands 113 Revision D 12/09 A799-PG00001D Expanded ash memory alloc ation ASCII GS “ 0x80 Hexadecimal 1D 22 80 Decimal 29 34 128 This sequence of commands is used to specify the number of ash sectors to be used for different applications. The begin and end sequence commands must be sent. All areas do not need to ha ...

  • Cognitive Solutions A799 - page 114

    Chapter 4: Pr ogramming Commands 114 Revision D 12/09 A799-PG00001D Select ash area for storing logos and user-dened characters ASCII GS” 0x81 Hexadecimal 1D 22 81 n Decimal 29 34 129 n V alue of n : n species n = 0 select logo/font ash n = 1 select permanent font ash n > 1 reserved Logos and user-dened characters can be stor ...

  • Cognitive Solutions A799 - page 115

    Chapter 4: Pr ogramming Commands 115 Revision D 12/09 A799-PG00001D User stor age status (C olorPOS ® ) ASCII GS 0x97 m n Hexadecimal 1D 97 m n Decimal 29 151 m n V alue of m: m species the type of stored object to be repor ted: m = 0 return the kilobytes (1024) of free user RAM, n = 0 gets largest free block size n = 1 gets the total size free ...

  • Cognitive Solutions A799 - page 116

    Chapter 4: Pr ogramming Commands 116 Revision D 12/09 A799-PG00001D Flash do wnload These commands are used to load rmware into the printer . The commands are listed in numerical order according to their hexadecimal codes. Each command is described and the hexadecimal, decimal, and ASCII codes are listed. There are three ways to enter the downlo ...

  • Cognitive Solutions A799 - page 117

    Chapter 4: Pr ogramming Commands 117 Revision D 12/09 A799-PG00001D Return segment number status of ash memory ASCII GS SOH Hexadecimal 1D 01 Decimal 29 1 Returns the size of the ash used. There may be 16 (1 Meg) or 32 (2 Meg) sectors in ash memory . This command assures that the rmware to be downloaded is the appropriate size for as ...

  • Cognitive Solutions A799 - page 118

    Chapter 4: Pr ogramming Commands 118 Revision D 12/09 A799-PG00001D Erase all ash con tents ex cept boot sector ASCII GS SO Hexadecimal 1D 0E Decimal 29 14 Causes the entire ash memory to be erased. The printer returns ACK if the command is successful; NAK if it is unsuccessful. Exc eptions A vailable only in download mode. Return main progra ...

  • Cognitive Solutions A799 - page 119

    Chapter 4: Pr ogramming Commands 119 Revision D 12/09 A799-PG00001D communications failed or that the write to ash failed. The alternatives seem to be to retry the block or halt loading and assume a hardware failure. Related informa tion A vailable only in download mode. Reset rmw are ASCII GS (SP ACE) Hexadecimal 1D FF Decimal 29 255 Ends th ...

  • Cognitive Solutions A799 - page 120

    Chapter 4: Pr ogramming Commands 120 Revision D 12/09 A799-PG00001D Setting the Gateway ASCII US BS ET X n1 n2 n3 n4 Hexadecimal 1F 08 03 n1 n2 n3 n4 Decimal 31 8 3 n1 n2 n3 n4 Default: none Sets the printer to the gatewa y having the IP address value specied b y the values n1 to n4 . A gatewa y, even when the printer is on another subnet, is no ...

  • Cognitive Solutions A799 - page 121

    Chapter 4: Pr ogramming Commands 121 Revision D 12/09 A799-PG00001D DHCP (auto- congura tion) ASCII US BS BS n1 Hexadecimal 1F 08 08 n1 Decimal 31 8 8 n1 n1 = 0: disabled n1 = 1: enabled Default: enabled Enables or disables the use of DHCP at power-up t o obtain an IP address. If no address is found within two minutes , DHCP obtains the default ...

  • Cognitive Solutions A799 - page 122

    Chapter 4: Pr ogramming Commands 122 Revision D 12/09 A799-PG00001D ...

  • Cognitive Solutions A799 - page 123

    Appendix A: Commands by Hexadecimal C ode 123 Revision D 12/09 A799-PG00001D Appendix A: C ommands listed by he xadecimal code By c ommand code Code (he xadecimal) Command Page 09 Horizontal tab 45 0A Print and f eed paper one line 42 0C Print and return t o standard mode 105 0D Print and carriage return 42 10 Clear printer 35 10 04 n Real time sta ...

  • Cognitive Solutions A799 - page 124

    Appendix A: Commands by Hexadecimal C ode 124 Revision D 12/09 A799-PG00001D Code (he xadecimal) Command Page 1B 33 n Set vertical line spacing 47 1B 34 m a0 a1 a2 Read from user data storage 111 1B 3A 30 30 30 Copy character set from ROM t o RAM 56 1B 3D n Select peripheral device (for multi-drop) 36 1B 3F n Cancel user-dened charac ter 56 1B 4 ...

  • Cognitive Solutions A799 - page 125

    Appendix A: Commands by Hexadecimal C ode 125 Revision D 12/09 A799-PG00001D Code (he xadecimal) Command Page 1C 70 m n Print ash logo 71 1C 71 n ... Dene ash logos 71 1D 00 Return boot sector rmware part number 116 1D 01 Return segment number status of ash memory 117 1D 02 nn Select ash memor y sec tor to download 117 1D 03 n Rea ...

  • Cognitive Solutions A799 - page 126

    Appendix A: Commands by Hexadecimal C ode 126 Revision D 12/09 A799-PG00001D Code (he xadecimal) Command Page 1D 68 n Select bar code height 99 1D 6B m d1...dk 00 Print bar code 99 or 1D 6B m n d1...dn P rint bar code 99 1D 6B n d 1... 00 Print GS1 Databar (RSS bar code), null terminated 102 1D 6B m n L n H d 1... dn Print GS1 DataBar (RSS bar code ...

  • Cognitive Solutions A799 - page 127

    Appendix A: Commands by Hexadecimal C ode 127 Revision D 12/09 A799-PG00001D Code (he xadecimal) Command Page 1F 03 17 a m s LogoEZ ® attribute mapping 79 1F 04 n Convert 6- dots/mm bitmap to 8-dots/mm bitmap 81 1F 05 n S elect superscript or subscript modes 63 1F 08 00 Restore default settings 119 1F 08 01 n1 n2 n3 n4 Set IP address 119 1F 08 02 ...

  • Cognitive Solutions A799 - page 128

    Appendix B: Resident Character Sets 128 Revision D 12/09 A799-PG00001D ...

  • Cognitive Solutions A799 - page 129

    Appendix B: Resident Character Sets 129 Revision D 12/09 A799-PG00001D Appendix B: Resident Char ac ter Sets Character sets Code page 437 (US) ...

  • Cognitive Solutions A799 - page 130

    Appendix B: Resident Character Sets 130 Revision D 12/09 A799-PG00001D Code page 737 ( Greek) ...

  • Cognitive Solutions A799 - page 131

    Appendix B: Resident Character Sets 131 Revision D 12/09 A799-PG00001D Code page 850 (Multilingual) ...

  • Cognitive Solutions A799 - page 132

    Appendix B: Resident Character Sets 132 Revision D 12/09 A799-PG00001D Code page 852 (Sla vic) ...

  • Cognitive Solutions A799 - page 133

    Appendix B: Resident Character Sets 133 Revision D 12/09 A799-PG00001D Code page 857 (T urkish) ...

  • Cognitive Solutions A799 - page 134

    Appendix B: Resident Character Sets 134 Revision D 12/09 A799-PG00001D Code page 858 (with E urosymbol) ...

  • Cognitive Solutions A799 - page 135

    Appendix B: Resident Character Sets 135 Revision D 12/09 A799-PG00001D Code page 860 (P or tuguese) ...

  • Cognitive Solutions A799 - page 136

    Appendix B: Resident Character Sets 136 Revision D 12/09 A799-PG00001D Code page 862 (Hebr ew) ...

  • Cognitive Solutions A799 - page 137

    Appendix B: Resident Character Sets 137 Revision D 12/09 A799-PG00001D Code page 863 (F rench Canadian) ...

  • Cognitive Solutions A799 - page 138

    Appendix B: Resident Character Sets 138 Revision D 12/09 A799-PG00001D Code page 865 (Nor dic) ...

  • Cognitive Solutions A799 - page 139

    Appendix B: Resident Character Sets 139 Revision D 12/09 A799-PG00001D Code page 866 ( C yrillic) ...

  • Cognitive Solutions A799 - page 140

    Appendix B: Resident Character Sets 140 Revision D 12/09 A799-PG00001D Code page 1252 (Windo ws Latin 1) ...

  • Cognitive Solutions A799 - page 141

    ...

  • Cognitive Solutions A799 - page 142

    A799 Tw o- Color Thermal Receipt Printer: P rogrammer Guide A799-PG00001 Rev . D 12/09 ...

Manufacturer Cognitive Solutions Category Printer

Documents that we receive from a manufacturer of a Cognitive Solutions A799 can be divided into several groups. They are, among others:
- Cognitive Solutions technical drawings
- A799 manuals
- Cognitive Solutions product data sheets
- information booklets
- or energy labels Cognitive Solutions A799
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cognitive Solutions A799.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cognitive Solutions A799, service manual, brief instructions and user manuals Cognitive Solutions A799. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cognitive Solutions A799.

Similar manuals

A complete manual for the device Cognitive Solutions A799, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cognitive Solutions A799 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cognitive Solutions A799.

A complete Cognitive Solutions manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cognitive Solutions A799 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cognitive Solutions A799, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cognitive Solutions A799, that we can find in the current document
3. Tips how to use the basic functions of the device Cognitive Solutions A799 - which should help us in our first steps of using Cognitive Solutions A799
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cognitive Solutions A799
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cognitive Solutions A799 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cognitive Solutions A799?

Use the form below

If you did not solve your problem by using a manual Cognitive Solutions A799, ask a question using the form below. If a user had a similar problem with Cognitive Solutions A799 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)