English dropdown-ico

Manual Burley PRE-2004

12 pages 0.5 mb
Download

Go to site of 12

Summary
  • Burley PRE-2004 - page 1

    Pr e-2004 d’Lite, Lite & Pr e-2005 Encor e Handlebar & Stroller W heel Supplement T o be used in conjunction with 2003 or previous model year Burley trailer Owner’s Instruction & Safety Manual. T able of Contents Page I. Introduction 2 II. Preparation for Installation 3 III. Handlebar Installation 3 IV . Using the Handle 6 V . Mount ...

  • Burley PRE-2004 - page 2

    2 Burley W alk ‘n Roller Manual; models 2003 and earlier I. Introduction Congratulations! With the W alk ’n Roller option you are able to stroll or jog with your kids – using your Burley d’Lite, Burley Lite, or Burley Encore tr ailer!. Y ou can enjoy years of maintenance-fr ee c ycling and strolling together , all in one neat package. Every ...

  • Burley PRE-2004 - page 3

    3 Burley W alk ‘n Roller Manual; models 2003 and earlier II. Prepar ation f or Installation The W alk ’n Roller requires the assembly and attachment of 3 components: handlebar , parking brake, and stroller wheel. T hese are covered in sections III, V , and VII. Each section has its associated par t list so that you may confi rm that you have r ...

  • Burley PRE-2004 - page 4

    4 Burley W alk ‘n Roller Manual; models 2003 and earlier NO TE: if you hav e a 2004 Encore, this step is not necessary . Locate the replac ement par ts for the roll bar catch and hinge , and their counterparts on the trailer (see the fi gure, top of next page). The “ catch” is located on the trailer ’ s right, the “hinge ” is on the le ...

  • Burley PRE-2004 - page 5

    5 Burley W alk ‘n Roller Manual; models 2003 and earlier Replace the roll bar into the new hinge. Use the pre-existing 1.5 inch hex bolt from the old hinge and the new jam locking nut provided . Tighten until the end of the bolt is fl ush or slightly protrudes beyond the nut. On the right side, remov e the old catch from the frame sa ving the Ph ...

  • Burley PRE-2004 - page 6

    6 Burley W alk ‘n Roller Manual; models 2003 and earlier Insert the Handle receivers, on right and left side using 1-1/8” bolts and locking nuts provided . The right and left receiv ers are side specifi c. Be sure to mount the receiv er that directs the handle upward towar d the back. IV . Using the Handle Install the handle from the rear of t ...

  • Burley PRE-2004 - page 7

    7 Burley W alk ‘n Roller Manual; models 2003 and earlier V . Mount W heel Piv ot Assembl y Par ts Included f or the Pivot wheel Assembly Attachment: (1) 1/4 x 2” hex bolt (1) Pivot Wheel Assembly (3) 1/4” locking nuts (3) 1/4 x 1” hex bolts (3) 5/8” washers T empor ar y Hitch R emoval Before installing the Wheel Pivot Assembly , the hitch ...

  • Burley PRE-2004 - page 8

    8 Burley W alk ‘n Roller Manual; models 2003 and earlier Re-Assembly with the Piv ot W heel • Slide the wheel pivot assembly ov er the end of the tongue so that the hole in the tongue lines up with the hole in the top as shown below . • Line the hitch connector hole #4 with those same two holes. • Run the 2-inch bolt provided through the d- ...

  • Burley PRE-2004 - page 9

    9 Burley W alk ‘n Roller Manual; models 2003 and earlier VI. Using the Walk n ’ Roller Wheel The wheel has two positions. One is f or use as a trailer , “bike” position. The other is for use as a stroller , “str oll” position. Before changing engage the parking brake. T o rotate the wheel, loosen the k nob , #1. This will loosen the tri ...

  • Burley PRE-2004 - page 10

    10 Burley W alk ‘n Roller Manual; models 2003 and earlier Clamp the brake assembly onto the frame tube as shown. The clamp should be oriented so that the bolt runs underneath the main frame tubing . F asten with the bolt and nut through the clamp , but do not tighten. Adjust the brake by sliding backward or forward as needed before tightening . Y ...

  • Burley PRE-2004 - page 11

    11 Burley W alk ‘n Roller Manual; models 2003 and earlier VIII. Safety Guidelines • Walk n ’ Roller must be operated by a responsible adult. • Wear str eet shoes. D o not wear roller or in-line skates, as you may lose balanc e or be unable to emergency stop . • Check handle is secure, button protruding through handle receivers . • Alway ...

  • Burley PRE-2004 - page 12

    IX. Maintenance Grease the wheel-pivot assembly twice a y ear (monthly under wet, dirt y , salty conditions). Use a standard grease gun with multi- purpose (thick brown, or green) grease and insert into the hole on pivot casing (1). Wipe clean all the old grease that fl ushes out. T his can be done by your local bike shop or gas station while you ...

Manufacturer Burley Category Stroller

Documents that we receive from a manufacturer of a Burley PRE-2004 can be divided into several groups. They are, among others:
- Burley technical drawings
- PRE-2004 manuals
- Burley product data sheets
- information booklets
- or energy labels Burley PRE-2004
All of them are important, but the most important information from the point of view of use of the device are in the user manual Burley PRE-2004.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Burley PRE-2004, service manual, brief instructions and user manuals Burley PRE-2004. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Burley PRE-2004.

Similar manuals

A complete manual for the device Burley PRE-2004, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Burley PRE-2004 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Burley PRE-2004.

A complete Burley manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Burley PRE-2004 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Burley PRE-2004, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Burley PRE-2004, that we can find in the current document
3. Tips how to use the basic functions of the device Burley PRE-2004 - which should help us in our first steps of using Burley PRE-2004
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Burley PRE-2004
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Burley PRE-2004 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Burley PRE-2004?

Use the form below

If you did not solve your problem by using a manual Burley PRE-2004, ask a question using the form below. If a user had a similar problem with Burley PRE-2004 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)