-
Multitech MultiModem ZBA - page 1
MultiModem ® ZBA MT9234ZBA-USB User Guide ...
-
Multitech MultiModem ZBA - page 2
2 Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000 419D) MultiModem ZBA User Guide MT934ZBA-USB S000419D Revision D Copyright All rights reserved. T his publication may not be reprod uced, in whole or in part, without pr ior expressed written permission from Multi-Tech Systems, Inc. Copyright © 2009 by Multi-Tech Systems, Inc. Multi-Tech Sy ...
-
Multitech MultiModem ZBA - page 3
Chapter 1 – Description and Specifi cation Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000 419D) 3 CONTENTS CHAPTER 1 – DESCRIPTION AND SPECIFICATION ....................................................... 4 Features include: ............................................................................................................ ...
-
Multitech MultiModem ZBA - page 4
Chapter 1 – Description and Specifi cation 4 Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000 419D) Chapter 1 – Description and Specification Congratulations on your purch ase of the MultiModem ZBA-USB modem. Your MultiModem produ ct data/fax modem supports remote configuration and dial-up connections. It offers V.34/33.6K fax and Error ...
-
Multitech MultiModem ZBA - page 5
Chapter 1 – Description and Specifi cation Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000 419D) 5 Technical Specifications Your MultiModemZBA-USB modem meet s the following sp ecifications: Trade Name MultiModem ® ZBA Model Number MT9234ZBA-USB Server-to-Client D ata Rates V.90 speeds when accessi ng a V.90 or V.92 server (actual spe ed ...
-
Multitech MultiModem ZBA - page 6
Chapter 2 - Installation 6 Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000 419D) Chapter 2 – Installation This chapter show s you step-by-step ho w to set up your Multi-Tech MultiModem product. Safety Warning Telecom ● Use this product only with UL and cUL listed computers. ● To reduce the risk of fire, use only 26 AWG (.41mm) or larg ...
-
Multitech MultiModem ZBA - page 7
Chapter 2 - Installation Install the Modem Driver Introduction Compatibility: This MultiModem is compatible with Windows Op erating System s Vista/XP/2003/2008 and Linux. Windows Drivers: The MultiModem product drive r must be installe d in your computer’s program directory. The Windows drivers are locate d on the MultiModem product CD in the Dri ...
-
Multitech MultiModem ZBA - page 8
Chapter 2 - Installation 8 Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000 419D) 5. The next screen prompts y ou to insert the disc t hat came with your MultiModem prod uct. If you have the disc that came with your device, insert it now. Then, click on I don’t have the disc. Show me other options. Windows may prompt you to sear ch online, ...
-
Multitech MultiModem ZBA - page 9
Chapter 2 - Installation 7. At the Browse for driver so ftware on you r computer screen. Click the Browse button. 8. Browse to the Drivers folder on your Mult iModem pr oduct CD , then select the Windows_Drivers folder and then the Vista32 folder. If you were installin g drivers on a Vista 64-bit Operating System, you would browse to the Vista64 fo ...
-
Multitech MultiModem ZBA - page 10
Chapter 2 - Installation 10 Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000 419D) 10. Installing driver software… screen a ppears. 11. When the software for this device has been succe ssfully installed screen appears with Windows has finished installing the driver softwa r e for this device: MT9234ZBA-USB Multimodem. Click Close . ...
-
Multitech MultiModem ZBA - page 11
Chapter 2 - Installation Installation of the Modem 12. The Found New Hardware – Multi-Te ch Systems MultiModem p roduct screen appears. If you have the disc that came with your device, insert it now. The MultiModem product CD is still in the CD ROM drive. Click Next . 13. Would you like to install this device software? Click Install. Multi-Tech S ...
-
Multitech MultiModem ZBA - page 12
Chapter 2 - Installation 12 Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000 419D) 14. The software for this device has ebeen successfully installed scre en appears. Windows has finished installing the driver software for this dev i ce: Multi-Tech Systems MT9234ZBA-USB. 15. Click Close . The installation of drivers is now complete. After ins ...
-
Multitech MultiModem ZBA - page 13
Chapter 2 - Installation Installing the Modem Driver in Windows Server 2008,XP,2003 This installation assumes a Windo ws Server 2008, XP, or 2003 oper ating system. Part A for Windows Server 2008,XP,2003: Installi ng the Serial Port 1. Connect the USB cable be tween the MultiModem and the PC. 2. Insert the MultiModem product CD into your CD-RO M dr ...
-
Multitech MultiModem ZBA - page 14
Chapter 2 - Installation 14 Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000 419D) 4. The Please choose your search and installation options appea rs. Select only (floppy, CD- ROM…) ensure that Include this location in the search is selected. Click the Browse button. 5. Browse to the Drivers folder on your Mult iModem pr oduct CD, then sel ...
-
Multitech MultiModem ZBA - page 15
Chapter 2 - Installation 6. Please wait while the wizard sea rches for the MT9234ZBA-USB MultiModem. This screen only appears briefly. 7. Please select the best match for your hardware from the list below. Select MT9234ZBA-USB MultiModem . Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000 419D) 15 ...
-
Multitech MultiModem ZBA - page 16
Chapter 2 - Installation 16 Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000 419D) 8. A Windows Logo Testing screen ap pears. Click Continue Any w ay. 9. Please wait while the wizard install s the software. ...
-
Multitech MultiModem ZBA - page 17
Chapter 2 - Installation 10. At the Completing the Found New Hard ware Wizard screen, click Finish . Installation of the Serial Port is now complete. Part B for Windows Server 2008, XP, 2003: Installing the Modem 11. The Welcome to the Found New Hardware Wizard screen – Can Windo w s connect to Windows update to search for software? Select No, no ...
-
Multitech MultiModem ZBA - page 18
Chapter 2 - Installation 18 Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000 419D) 12. This wizard helps you inst all software for Multi-Tech MT9234ZBA-USB product. Click on Install from a list or specific location (Adv anced) . Then click Next . 13. The Please choose your search an d installation options screen a ppears. Click Next . ...
-
Multitech MultiModem ZBA - page 19
Chapter 2 - Installation 14. Please wait while the wizard searches for the MT9234ZBA-USB screen ap pears. This screen o nly appears briefly. 15. Please select the best mat ch for your hardware from the list below. 16. The final Windows Logo Testing scree n may appear depending on operating system settings. This screen pertains to the creation of a ...
-
Multitech MultiModem ZBA - page 20
Chapter 2 - Installation 20 Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000 419D) 17. Please wait while the wizard installs the software. 18. The Completing the Found New Hardware Wi zard screen appears. Click Finish . With the modem .inf file successfully installed, the entire software installation procedure for the MultiModem product is c ...
-
Multitech MultiModem ZBA - page 21
Chapter 2 - Installation Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000 419D) 21 Country Configuration with Global Wizard Different countries have di fferent requirements for how m odems must functio n. Theref ore, before you use your modem, you must configure it to match the defaults of the country in whi ch you are using it. You can use ...
-
Multitech MultiModem ZBA - page 22
Chapter 3 - Operation 22 Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000 419D) Chapter 3 - Operation Front Panel The MultiModem product has 6 LED indicators on the front panel that indicate status, configuration, and activity. Figure 3-1. Front panel Transmit Data. The TD LED flashes wh en the modem is transmitting data to another modem . R ...
-
Multitech MultiModem ZBA - page 23
Chapter 3 - Operation Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000 419D) 23 Internet Connection Before you can connect to the Internet, you must set up a remote-node client program on you r computer. Windows XP uses HyperTerminal to establish you r connection to the ISP’s server, which is the shared computer that manages calls from cli ...
-
Multitech MultiModem ZBA - page 24
Chapter 4 – Remote Confi guration 24 Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000 419D) Chapter 4 - Remote Configuration Remote configuration is a netwo rk management tool t hat allows you to configure modems any where in your network from one location. With pa ssword protected remote configuration, you can issue AT commands to a remot ...
-
Multitech MultiModem ZBA - page 25
Chapter 5 - Troubleshooting Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000 419D) 25 Chapter 5- Troubleshooting Your modem was thorough ly tested at the factory before it was shipped. If you are unable to make a su ccessful connection, or if you experience data loss or ga rbled char acters during your connection, it is possi ble that the mo ...
-
Multitech MultiModem ZBA - page 26
Chapter 5 - Troubleshooting 26 Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000 419D) internal dial tone that sounds different from the normal dial tone. In that case, the modem might not recognize the dial tone and might treat it as an error. Check your PBX manual to see if you can cha nge the internal dial tone; if you can’t, change y ou ...
-
Multitech MultiModem ZBA - page 27
Chapter 5 - Troubleshooting Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000 419D) 27 The Modem Doesn’t Work with Caller ID ● Caller ID information is transmitted between the first and se cond rings, so if autoanswe r is turned off ( S0=0 ) or if the modem is set to answer after only one ring ( S0=1 ), the modem will not receive Caller I ...
-
Multitech MultiModem ZBA - page 28
Appendix A – Regulator y Compliance 28 Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000 419D) Appendix A – Regulatory Compliance FCC Part 68 Telecom 1. This equipment complie s with part 68 of the Federal Communications Commi ssion Rules. On the outside surface of this equipment is a label that contai ns, among other information, t he FC ...
-
Multitech MultiModem ZBA - page 29
Appendix A – Regulator y Compliance Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000 419D) 29 FCC Part 15 Regulation This equipment has been tested an d found to comply with the limits for a Class B digital device, purs uant to 47 CFR – FCC Part 15 regulat ions. The stated limits in this regul ation are designed to pr ovide r easonable p ...
-
Multitech MultiModem ZBA - page 30
Appendix A – Regulator y Compliance 30 Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000 419D) International Modem Restrictions Some dialing and answering defaults a nd restrictions may vary for internatio nal modems. Changing settin gs may cause a modem to become non-co mpliant with -national tele com requirements in specific countrie s. A ...
-
Multitech MultiModem ZBA - page 31
Appendix B – W EEE Statement Appendix B – Waste Electrical and Electronic Equipment July, 2005 The WEEE directive places an obligation on EU-based manufactu rers, distributors, retailers and importers to take- back electronics prod ucts at the end of their useful life. A sister Directiv e, ROHS (Restri ction of Hazardous Substances) complements ...
-
Multitech MultiModem ZBA - page 32
Appendix C – C-ROHS HT/ST Substan ce Concentration 32 Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000419D) Appendix C - C-ROHS HT/TS Substance Concentration 依照中国标准的有毒有害物质信息 根据中华人民共和国信息产业部 (MII) 制 定的电子信息产品 (EIP) 标准－中华人民共和国《电子信息产 品? ...
-
Multitech MultiModem ZBA - page 33
Appendix D – Linu x Installations Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000 419D) 33 Appendix D - Linux Installations Introduction The MULTIMODEM PRODUCT supports Linu x 2.4 kernel versio ns (2.4.28 and a bove), 2.6 kernel versions 2.6.8 throu gh 2.6.10, and, with a special patch, Linu x kernel versio ns 2.6.11 through 2.6.20 .4. Th ...
-
Multitech MultiModem ZBA - page 34
Appendix D – Linu x Installations 34 Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000419D) 2. Installation Steps Install the Kernel Sources To build the TI USB driver you must have the matching ker nel sources for your kernel. To verify that you have matching kernel sources, run "un ame -r" to get the version of the running kerne ...
-
Multitech MultiModem ZBA - page 35
Appendix D – Linu x Installations Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000 419D) 35 Build and Install the TI USB Driver from the Source RPM Package Follow this step if your distribution supports RPM packages; other wise, follow the next step on installing fr om a TGZ package. You will need the T I USB source RPM package for this st ...
-
Multitech MultiModem ZBA - page 36
Appendix D – Linu x Installations 36 Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000419D) Build and Install the TI USB Driver from the TGZ Package You will need the T I USB tgz package for this step. The Introducti on section above desc ribes where to find the latest TI USB t gz package. Log in as root and do the follo wing: Command Expla ...
-
Multitech MultiModem ZBA - page 37
Appendix D – Linu x Installations Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000 419D) 37 Device Files Because the TI USB driver does not use us bs erial (to avoid known problems with usbser ial) it uses its o wn device file names, /dev/ttyTIUSB0, /dev/ttyTIUSB1, and so on. The device files are created a utomatically w hen the ti _usb dr ...
-
Multitech MultiModem ZBA - page 38
Appendix D – Linu x Installations 38 Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000419D) Installation in Computers Using the Linux 2.6 Kernel 1. Introduction This procedure applies to Li nux 2.6 ker nel versions 2.6.8 throug h 2.6.10. These tgz and source RPM packages (ti_usb_2.6- 1.2.tgz and ti _usb_2.6-1.2-1.src.rp m) contain a device ...
-
Multitech MultiModem ZBA - page 39
Appendix D – Linu x Installations Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000 419D) 39 Prepare the Kernel Sources This step may or may not be necessary, depending on how yo ur Linux distr ibution insta lls the kernel sources. Log in as root and do the follo wing: Command Explanation 1. cd /usr/src/linux-<version> Change to the s ...
-
Multitech MultiModem ZBA - page 40
Appendix D – Linu x Installations 40 Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000419D) Build and Install the TI USB Driver from the Source RPM Package Follow this step if your distribution supports RPM packages; other wise, follow the next step on installing fr om a TGZ package. You will need the T I USB 3410/5052 source RPM package fo ...
-
Multitech MultiModem ZBA - page 41
Appendix D – Linu x Installations Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000 419D) 41 Build and Install the TI USB Driver from the TGZ Package Follow this step if your distribution does not support RPM packa ges; otherwise, follo w the previous step on installing from an RPM package. You will need the T I USB 3410/5052 tgz package fo ...
-
Multitech MultiModem ZBA - page 42
Appendix D – Linu x Installations 42 Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000419D) Installation in Computers Using the Linux 2.6.20 Kernel 1. Introduction This procedure applies to Linu x 2.6 kernel ve rsions 2.6.11 through 2.6.2 0 and higher. This tgz package contains a patch for the Linux kerne l versi on 2.6.20 and later to add ...
-
Multitech MultiModem ZBA - page 43
Appendix D – Linu x Installations Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000 419D) 43 Installing the Firmware Images Copy ti_mts_fw_cdma, ti_mts_fw_edge, ti_mts_fw_gsm, ti_mts_fw_MULTIMODEM PRODUCT and ti_mts_f w_mt9234zbausb to /usr/lib/hotplug/firmware / or /lib/firmware depending on your distribution. Be sure the files are owned b ...
-
Multitech MultiModem ZBA - page 44
Appendix E – ASCII Conversion 44 Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000419D) Appendix E – ASCII Conversion ASCII Conversion Chart CTRL CODE HEX DEC CODE HE X DEC CODE HEX DEC CODE HEX DEC @ NUL 00 0 SP 20 32 @ 40 64 ` 60 96 A SOH 01 1 ! 21 33 A 41 65 a 61 97 B STX 02 2 " 22 34 B 42 66 b 62 98 C ETX 03 3 # 23 35 C 43 67 c 6 ...
-
Multitech MultiModem ZBA - page 45
Index Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000 419D) 45 Index A AT Commands ....................................................................... 4 autoanswer ......................................................................... 26 C Call Waiting ...................................... ...
Do you have a question concerning Multitech MultiModem ZBA?
Use the form below
If you did not solve your problem by using a manual Multitech MultiModem ZBA, ask a question using the form below. If a user had a similar problem with Multitech MultiModem ZBA it is likely that he will want to share the way to solve it.