English dropdown-ico

Manual Weider WESY16010

28 pages 0.62 mb
Download

Go to site of 28

Summary
  • Weider WESY16010 - page 1

    USER'S MANUAL ® Model No. WESY16010 Serial No. (Write the serial number in the space above for reference.) Serial Number Decal (under seat) Visit our website at www .weiderfitness.com new products, prizes, fitness tips, and much more! QUESTIONS? If you have questions, or if there are missing or damaged parts, we will guarantee complete satis- ...

  • Weider WESY16010 - page 2

    2 T ABLE OF CONTENTS FULL 90-DA Y WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORT ANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . ...

  • Weider WESY16010 - page 3

    3 1. Read all instructions in this manual and in the accompanying literature before using the home gym. 2. It is the responsibility of the owner to ensure that all users of the home gym are adequate- ly informed of all precautions. 3. The home gym is intended for home use only . Do not use the home gym in a commer- cial, rental, or institutional se ...

  • Weider WESY16010 - page 4

    4 BEFORE YOU BEGIN ASSEMBLED DIMENSIONS: Height: 76 in. Width: 37 in. Length: 48 in. Foot Plate Low Pulley Station High Pulley Station Lat Bar Leg Lever Butterfly Arms Press Arm Weight Carriage Seat Backrest Thank you for selecting the versatile WEIDER ® 8920 home gym. The WEIDER ® 8920 of fers a selection of weight stations designed to develop e ...

  • Weider WESY16010 - page 5

    5 ASSEMBL Y 1 56 3 5 51 51 14 1 27 4 Before beginning assembly , carefully read the following information and instructions: • Place all parts of the home gym in a cleared area and remove the packing materials; do not dis- pose of the packing materials until assembly is completed. • Assembly is divided into four stages: 1) frame assembly , 2) pr ...

  • Weider WESY16010 - page 6

    6 FRAME ASSEMBL Y 2. Refer to drawing 2a. Press a 1” Inner Cap (61) into each end of the weight tube on the Weight Carriage (19). Note: The Square Slider Bushings (70) should be pre-assem- bled to the Weight Carriage (19) and W eight Stop (67). T urn the Weight Stop (67) so that the hole in the Weight Stop is oriented in the same direc- tion as t ...

  • Weider WESY16010 - page 7

    7 ARM ASSEMBL Y 5. Press a 1 3/4” Square Inner Cap (44) into the top of one of the Press Arms (46). Press a 1” Round Inner Cap (49) into each end of the handle on the Press Arm. Attach the Press Arm to one side of the Press Frame (17) with two 5/16” x 2 1/2” Bolts (22) and two 5/16” Nylon Locknuts (3). Assemble the other Press Arm (46) in ...

  • Weider WESY16010 - page 8

    8 CABLE ASSEMBL Y 11 8 9 10 58 58 55 16 25 Hook Ball 15 50 58 7 47 58 21 7 21 6 50 23 6 42 8. During steps 9 through 22, refer to the CABLE DIAGRAM on page 19 of this manual to verify proper cable routing. Before begin- ning this section, identify the Short Cable (23) and the Long Cable (58) by comparing the lengths and the ends of the cables. IMPO ...

  • Weider WESY16010 - page 9

    9 CABLE ASSEMBL Y 12 48 21 50 7 6 58 12. Route the Long Cable (58) around a “V”- Pulley (6). Be sure that the Cable is in the groove of the “V”-Pulley and that a Long Cable T rap (50) is turned to hold the Cable in place. Attach the “V”-Pulley (6) and the Long Cable T rap (50) to the Right Arm (48) with a 3/8” x 2 1/2” Bolt (7) and ...

  • Weider WESY16010 - page 10

    10 CABLE ASSEMBL Y 17 21 15 59 15 66 9 9 Bracket 17 16 16. Attach the Long Cable (58) to the Weight Carriage (19) with a 3/8” x 3/4” Bolt (69) and a 3/8” Nylon Locknut (21). Make sure that the Bolt and the Nylon Locknut are tight. 17. Using a 3/8” x 3 1/2” Bolt (16), a 3/8” Flat W asher (9), and a 3/8” Nylon Locknut (21), secure a 3 1 ...

  • Weider WESY16010 - page 11

    11 CABLE ASSEMBL Y 19. Slide a Cable T rap (66) and a 3 1/2” Pulley (15) onto each 3/8” x 3 3/4” Bolt (68). Insert the Bolts into the Front Upright (42) from the direction shown. Hand tighten a 3/8” Nylon Locknut (21) with a 3/8” Flat W asher (9) onto each Bolt. Be sure that all parts are orient- ed as shown. Do not tighten the Nylon Lock ...

  • Weider WESY16010 - page 12

    22. Attach the end of the Short Cable (23) to the Long “U”-Bracket (57) with a 1/4” Nylon Lock- nut (2) and a 1/4” Flat W asher (10). Do not completely tighten the Nylon Locknut; it should be threaded onto the end of the Cable until two threads are showing above the Nylon Locknut, as shown in the inset drawing. 23. Attach the Backrest (41) ...

  • Weider WESY16010 - page 13

    13 24. Press a 1 1/2” Square Inner Cap (32) into the Seat Frame (36). Insert the 1/4” x 2” Carriage Bolt (38) into the center hole in the Seat Plate (37). Attach the Seat Plate to the Seat (13) with two 1/4” x 3/4” Screws (18). Insert the 1/4” x 2” Carriage Bolt (38) into the indicated hole in the Seat Frame (36). T ighten a 1/4” Ny ...

  • Weider WESY16010 - page 14

    14 27. Press 3/4” Round Inner Caps (34) into the ends of both Pad T ubes (28). Insert one Pad T ube (28) into the Seat Frame (36). Slide a Foam Pad (30) onto each end of the Pad T ube. Insert the other Pad T ube (28) into the Leg Lever (29). Slide a Foam Pad (30) onto each end of the Pad T ube. 28. Make sure that all parts have been properly tigh ...

  • Weider WESY16010 - page 15

    15 ADJUSTMENT The instructions below describe how each part of the home gym can be adjusted. Refer to the exercise poster accompanying this manual to see how the home gym should be set up for each exercise. IMPORT ANT : When attaching the lat bar or nylon strap, make sure that the attachments are in the correct starting position for the exercise to ...

  • Weider WESY16010 - page 16

    16 A TT ACHING AND REMOVING THE SEA T Set the bracket on the Seat Frame (36) onto the indi- cated pins on the Front Upright (42). Attach the Seat Frame to the Front Upright with the 5/16” x 2 3/4” Carriage Bolt (14) and the Seat Knob (40). For some exercises, the Seat (13) must be removed. First, be sure that the chain is not attached to the le ...

  • Weider WESY16010 - page 17

    17 WEIGHT ON PRESS ARM BUTTERFL Y ARM LOW PULLEY/ HIGH PULLEY WEIGHT (lbs.) (lbs.) LEG LEVER (lbs.) CARRIAGE (lbs.) 0 12 7 10 10 52 2 1 1 1 8 1 6 10 31 15 25 21 15 40 20 32 26 20 50 24 39 32 25 59 29 46 37 30 68 33 53 42 35 78 38 61 47 40 87 42 68 53 45 97 47 75 58 50 106 51 82 63 55 1 15 56 89 68 60 125 60 96 74 65 134 64 103 79 70 144 69 1 1 1 84 ...

  • Weider WESY16010 - page 18

    18 TROUBLE-SHOOTING AND MAINTENANCE Inspect and tighten all parts each time you use the home gym. Replace any worn parts immediately . The home gym can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents. TIGHTENING THE CABLES Woven cable, the type of cable used on the home gym, can stretch slightly when it is first u ...

  • Weider WESY16010 - page 19

    19 CABLE DIAGRAM The cable diagram below shows the proper routing of the Short Cable (23) and the Long Cable (58). Use the diagram to be sure that the two cables and the cable traps have been assembled correctly . If the cables have not been correctly routed, the home gym will not function properly and damage may occur . The numbers show the correc ...

  • Weider WESY16010 - page 20

    20 NOTES ...

  • Weider WESY16010 - page 21

    21 NOTES ...

  • Weider WESY16010 - page 22

    22 Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. P ART LIST—Model No. WESY16010 R0801A Key No. Qty . Description 1 2 5/16” x 2 1/2” Carriage Bolt 2 2 1/4” Nylon Locknut 3 12 5/16” Nylon Locknut 4 1 Base 5 1 Stabilizer 6 3 “V”-Pulley 7 3 3/8” x 2 1/2” Bolt 8 4 5/16” Flat W as ...

  • Weider WESY16010 - page 23

    56 15 12 2 57 23 21 3 5 51 14 51 4 1 27 68 7 50 6 21 63 62 63 62 47 48 44 45 44 45 13 40 38 37 18 32 28 30 34 10 2 24 36 30 34 14 33 3 29 34 30 28 9 21 49 46 32 30 34 35 49 49 46 22 3 9 16 23 59 17 21 52 53 39 44 44 10 66 54 31 31 59 26 60 60 49 15 19 27 22 8 58 21 61 61 11 69 67 21 9 66 15 11 8 55 71 15 44 15 16 58 25 44 21 61 12 64 21 20 66 3 15 ...

  • Weider WESY16010 - page 24

    Part No. 178217 R0801A Printed in Canada © 2001 ICON Health & Fitness, Inc. ORDERING REPLACEMENT P ARTS T o order replacement parts, simply call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday , 6 a.m. until 6 p.m. Mountain T ime (excluding holidays). T o help us assist you, please be pre- pared to give the f ...

  • Weider WESY16010 - page 25

    This chart is provided to help you identify the small parts used in assembly . Important: S ome parts ma y have been pre-assembled for shipping purposes; if you cannot find a part in the parts bags, check to see i f i t h a s bee n pre-assembled. REMOVE THIS P ART IDENTIFICA TION CHAR T FROM THE MANUAL! Note: Assembly is divided into four stages: 1 ...

  • Weider WESY16010 - page 26

    1 3/4" Square Inner Cap (44) 1 1/2" Square Inner Cap (32) 2" Square Inner Cap (27) 2" Square Outer Cap (51) 1" Square Inner Cap (65) ...

  • Weider WESY16010 - page 27

    5/16" Nylon Jamnut (72) 3/8" x 2 1/2" Eyebolt (35) 3/4" Round Inner Cap (34) 1" Round Inner Cap (49) 1" Round Cover Cap (62) 1" Inner Cap (61) 3/8" Flat W asher (9) 5/16" Flat W asher (8) 1/4" Flat W asher (10) 3/8" Nylon Jamnut (25) 3/8" Nylon Locknut (21) 5/16" Nylon Locknut (3) 1/4 ...

  • Weider WESY16010 - page 28

    1/4" x 2" Screw (24) 1/4" x 2 1/2" Screw (43) 5/16" x 2 1/2" Bolt (22) 5/16" x 4 3/4" Bolt (64) 1/4" x 2" Carriage Bolt (38) 3/8" x 3/4" Bolt (69) 3/8" x 1 3/4" Bolt (71) 3/8" x 2" Bolt (12) 3/8" x 2 1/2"Bolt (7) 5/16" x 2 1/4" Bolt (33) 3/8" x ...

Manufacturer Weider Category Home Gym

Documents that we receive from a manufacturer of a Weider WESY16010 can be divided into several groups. They are, among others:
- Weider technical drawings
- WESY16010 manuals
- Weider product data sheets
- information booklets
- or energy labels Weider WESY16010
All of them are important, but the most important information from the point of view of use of the device are in the user manual Weider WESY16010.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Weider WESY16010, service manual, brief instructions and user manuals Weider WESY16010. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Weider WESY16010.

Similar manuals

A complete manual for the device Weider WESY16010, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Weider WESY16010 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Weider WESY16010.

A complete Weider manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Weider WESY16010 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Weider WESY16010, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Weider WESY16010, that we can find in the current document
3. Tips how to use the basic functions of the device Weider WESY16010 - which should help us in our first steps of using Weider WESY16010
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Weider WESY16010
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Weider WESY16010 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Weider WESY16010?

Use the form below

If you did not solve your problem by using a manual Weider WESY16010, ask a question using the form below. If a user had a similar problem with Weider WESY16010 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)