English dropdown-ico

Manual InStep QE100A

10 pages 3.37 mb
Download

Go to site of 10

Summary
  • InStep QE100A - page 1

    Quick N EZ Foldable Bike Trailer Owner’s Manual for Model QE100A Please keep this Owner’s Manual for future reference. If you sell or give this product to someone else, please include this Owner’s Manual, and ask the new owners to read the instruct ions completely before operating. PRIOR TO ASSEMBLY  Please read this Owner’s Manual compl ...

  • InStep QE100A - page 2

    FULLY-ASSEMBLED TRAILER PARTS LIST QTY DESCRIPTION QTY DESCRIPTION 1 Frame w/ canopy, sling seat with 5-point 1 2-in-1 rain cover safety harness, tow bar, tow bar coupler, 2 16” rear wheels and rear wheel brackets attached. 1 Safety flag with 3-piece pole and joiners TOOLS REQUIRED FOR ASSEMBLY No tools are required to assemble the trailer. Howev ...

  • InStep QE100A - page 3

    ASSEMBLY AND OPERATING INS TRUCTIONS STEP 1 Remove the trailer from the carton and compare the contents with the parts list 1A 1B 1A. Remove all of the contents from inside the carton and place them on a clean flat surface. 1B. Set the wheels to the side and remove the black plastic caps from the ends of the axles. Remove the rain canopy and flag p ...

  • InStep QE100A - page 4

    STEP 3 Adjust the sling seat 3A 3B Area of detail in photo 3B 3A. Front view of the trailer with the crossbar secured in place. 3B. To provide more comfort, the sling seat can be adjusted by pulling on one or both sets of straps that run underneath the bottom of the seat. Loosen the straps to allow t he trailer to fold flat. STEP 4 Attach the 2-in- ...

  • InStep QE100A - page 5

    STEP 6 Extend and secure the tow bar 6A 6B 6C 6D Bracket 6A. Lay the trailer on its side with the tow bar at the top and undo the lock pi n from the bracket. 6B. Pivot the tow bar all the way forward until the shaft comes to rest in the front part of the bracket. 6C. Insert the lock pin shaft all the way through the forward holes in the bracket and ...

  • InStep QE100A - page 6

    STEP 9 Install the safety flag 9A 9B 9C Flag pole 9A. Connect the flagpole sections and find the small opening ne ar the top left edge of the canopy. 9B. Slide the end of the flagpole through the opening in the cano py. 9C. Slide the pole all the way down into the flag pole sleeve near the rear corner. WARNING Always use the safety flag when pullin ...

  • InStep QE100A - page 7

    STEP 12 Coupler attachment for bikes with quick-release rear axles. (Note: If your rear bike tire has two hub nuts please refer to Steps 10 & 11.) 12A 12B 12C 12D 12A. Flip open the quick-release lever, and remove the nut and spring from the opposite side. 12B. Hold the lever and pull the axle skewer with spring out. 12C. Completely remove the ...

  • InStep QE100A - page 8

    STEP 14 Proper use of the 5-point safety harness for one or two children 14A 14B WARNING To avoid serious injury children should always wear the seat belt and shoulder straps! 14A. Proper seating position for one child A. Undo the lap belt buckle and seat the child in the center of the trailer/str oller. B. Buckle the lap belt over the child’s la ...

  • InStep QE100A - page 9

    Removal of the trailer from the bike 1. Remove children and all cargo from inside the passenger compartment. 2. Unclip the tow bar safety strap from the “D” ring. 3. Loop the strap back around the bike frame tube so that the strap is free of the bike fra me. 4. Clip the end of the strap back on to the tow bar “D” ring. 5. Remove the quick-r ...

  • InStep QE100A - page 10

    If you have any questions about the safe use or assembly of this product, please contact one of our Customer Service Representatives at 1-800-242-6110 or by e-mail at info@instep.net . ACCESSORIES FOR YOUR TRAI LER Additional Coupler Kits allow you to switch your trailer from one bike to another. The Coupler Kit includes t he coupler plate, tab was ...

Manufacturer InStep Category Bicycle Accessories

Documents that we receive from a manufacturer of a InStep QE100A can be divided into several groups. They are, among others:
- InStep technical drawings
- QE100A manuals
- InStep product data sheets
- information booklets
- or energy labels InStep QE100A
All of them are important, but the most important information from the point of view of use of the device are in the user manual InStep QE100A.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals InStep QE100A, service manual, brief instructions and user manuals InStep QE100A. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product InStep QE100A.

Similar manuals

A complete manual for the device InStep QE100A, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use InStep QE100A by users. Manuals are usually written by a technical writer, but in a language understandable to all users of InStep QE100A.

A complete InStep manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual InStep QE100A - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the InStep QE100A, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the InStep QE100A, that we can find in the current document
3. Tips how to use the basic functions of the device InStep QE100A - which should help us in our first steps of using InStep QE100A
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with InStep QE100A
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of InStep QE100A in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning InStep QE100A?

Use the form below

If you did not solve your problem by using a manual InStep QE100A, ask a question using the form below. If a user had a similar problem with InStep QE100A it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)