English dropdown-ico

Manual Geovision GV-UBL1301-0F

567 pages Not applicable
Download

Go to site of 567

Summary
  • Geovision GV-UBL1301-0F - page 1

    ...

  • Geovision GV-UBL1301-0F - page 2

    ...

  • Geovision GV-UBL1301-0F - page 3

    Safety Notice FCC Compliance for GV-CBW120/220 This device complies with Part 15 of the FCC Rules. Operation is subject t o the f ollowing two condit ions: (1) this device m ay not c ause harmful interf erence and (2) this device must accept any int erference received, incl uding interference that may cause undesi red operation of the device. UL Ce ...

  • Geovision GV-UBL1301-0F - page 4

    Preface W elc om e to th e GV-IPCAM H.264 User’s Manual . The GV-IPCAM H.264 has a series of models designed to meet different needs. This Manual is designed for the following models and fi rmware versions: Note: To upgrade the camera firmware from V2.07 or earlier to the latest vers ion, back up the files in the camera’s storage devic e first ...

  • Geovision GV-UBL1301-0F - page 5

    Model Model Number Firmware Version GV-BX1200-0F ~ 2F GV-BX1300-0F ~ 2F GV-BX1500-0F ~ 2F GV-BX2400-0F ~ 2F GV-BX2500-0F ~ 2F GV-BX3400-0F ~ 2F Fixed Lens GV-BX1200-3V GV-BX1300-3V GV-BX1500-3V GV-BX2400-3V GV-BX2500-3V GV-BX2400-4V GV-BX3400-4V GV-BX3400-5V GV-BX5300-6V Varifo cal L en s Box Camera GV-BX1500-8F GV-BX2400-8F GV-BX2500-8F GV-BX3400- ...

  • Geovision GV-UBL1301-0F - page 6

    Model Model Number Firmware Version Target Box Camera GV-EBX1100 Series Fixed Lens V1.0 3 GV-BX120D-E V2.1 5 GV-BX220D-E GV-BX320D-E GV-BX520D-E GV-BX1500-E IR Ar ctic Bo x Camera GV-BX2400-E GV-BX3400-E GV-BX5300-E Varifo cal L en s V2.14 GV-MFD120 GV-MFD130 GV-MFD220 GV-MFD320 GV-MFD520 Mini Fixed Dome GV-MFD1501 Series GV-MFD2401 Series GV-MFD25 ...

  • Geovision GV-UBL1301-0F - page 7

    Model Model Number Firmware Version GV-MDR120 GV-MDR220 GV-MDR320 GV-MDR520 Mini Fixed Rugged Dome GV-MDR1500 Series GV-MDR2400 Series GV-MDR2500 Series GV-MDR3400 Series GV-MDR5300 Series Fixed Lens V2.14 Target Mini Fixed Dome GV-EFD1100 Series GV-EFD2100 Series Fixed Lens V1.0 3 Target Mini Fixed Rugged Dome GV-EDR1100 Seri es GV-EDR2100 Seri es ...

  • Geovision GV-UBL1301-0F - page 8

    Model Model Number Firmware Version GV-BL120D GV-BL130D GV-BL220D GV-BL320D GV-BL1200 GV-BL1300 GV-BL1500 GV-BL2400 GV-BL2500 GV-BL3400 Varifo cal L en s Bullet C amera GV-BL1210 GV-BL1510 GV-BL2410 GV-BL2510 GV-BL3410 GV-BL5310 Motorized Varif ocal Lens V2.14 IR Ar ctic Bu llet Camera GV-BL2510-E GV-BL5310-E Motorized Varif ocal Lens, extreme temp ...

  • Geovision GV-UBL1301-0F - page 9

    Model Model Number Firmware Version GV-VD120D (IK10+, T ranspar ent Cov er) GV-VD121D (IK10+, S moked C over) GV-VD122D (IK 7, Tra nspar ent Co ver) GV-VD123D (IK7, Smoked Cover) GV-VD220D (IK10+, T ranspar ent Cov er) GV-VD221D (IK10+, S moked C over) GV-VD222D (IK 7, Tra nspar ent Co ver) GV-VD223D (IK7, Smoked Cover) GV-VD320D (IK10+, T ranspar ...

  • Geovision GV-UBL1301-0F - page 10

    ...

  • Geovision GV-UBL1301-0F - page 11

    ...

  • Geovision GV-UBL1301-0F - page 12

    ...

  • Geovision GV-UBL1301-0F - page 13

    ...

  • Geovision GV-UBL1301-0F - page 14

    ...

  • Geovision GV-UBL1301-0F - page 15

    ...

  • Geovision GV-UBL1301-0F - page 16

    ...

  • Geovision GV-UBL1301-0F - page 17

    ...

  • Geovision GV-UBL1301-0F - page 18

    ...

  • Geovision GV-UBL1301-0F - page 19

    ...

  • Geovision GV-UBL1301-0F - page 20

    ...

  • Geovision GV-UBL1301-0F - page 21

    ...

  • Geovision GV-UBL1301-0F - page 22

    Chapter 25 CM S Configurations ..................................443 25.1 Center V2 ....... ........................................................................443 25.2 VSM.. ...................................................................................... 446 25.3 Dispatch Server.. ......................................................... ...

  • Geovision GV-UBL1301-0F - page 23

    Specifications : Bullet Camera (Part 2) .........................................570 Specifications : Ultra Bullet Ca mera.. ............................................ 581 Specifications : Target Bu llet Came ra ........................................... 593 Specifications : PTZ Camera.......................................................... 59 ...

  • Geovision GV-UBL1301-0F - page 24

    Naming a nd Def inition GV-System GeoVision Anal og and Digital Video Recording Software. The GV-System also refers to GV -M ul ti ca m System , GV-NVR System , GV-DVR Sy stem and GV- Hybrid DVR System at t he same tim e. XXII ...

  • Geovision GV-UBL1301-0F - page 25

    Options Optional devices can expand your camera’s capabilities and versatility . Contact your dealer f or more information. Device Description Power Adapter The power adapter is available for all GV-IP Camera (except Arct ic Box Camera, Mini Fix ed Rugged Dome and GV-BL2510-E / 5310-E). The supported regions are list ed below: • GV-BL Series (e ...

  • Geovision GV-UBL1301-0F - page 26

    Device Description GV-PA191 PoE Adapter The GV-PA191 PoE adapter is designed to provide power and network connecti on to the cameras over a single Ethernet cable. GV-PA481 PoE Adapter The GV-PA481 PoE adapter is designed to provide power and network connection to GV-BX1500-E / 2400-E / 3400-E / 5300-E over a single Ethernet cable. GV-POE Switch The ...

  • Geovision GV-UBL1301-0F - page 27

    Device Description Smoked Cover The smoked cover is an IK7, tinted camera cover designed for GV-Fixed IP Dome to conceal the directi on of the cam era lens. Plastic P G21 Conduit Connector The plastic PG21 conduit connector is used for running the wires of Target Mini Fixed Rugged Dome through a 1/2” conduit pipe. Metal PG21 Conduit Connector The ...

  • Geovision GV-UBL1301-0F - page 28

    Note for Connecting to GV-System The GV-IPCAM H.264 is designed to work with GV-System, a hybrid or digital vi deo management system. Note the following when GV-IPCAM H.264 is connect ed to GV-System: 1 By default, the images are rec orded to the memory card inserted in the GV-IP Cam era H.264 (except GV-I R Arctic Box Cam era and Target Series, wh ...

  • Geovision GV-UBL1301-0F - page 29

    Note for Recording 1 By default, the images are rec orded to the memory card inserted in the GV-IP Cam era H.264 (except GV-I R Arctic Box Cam era and Target Series, which are not equipped with a memory card slot). Make sure the Write recording data into local storage option (see 20. 1.1 Video Settings ) is enabled. If this option is disabled, the ...

  • Geovision GV-UBL1301-0F - page 30

    Note for Adjusting Focus and Zoom When adjusting the Focus and Zoom Screws (on Box Camera , IR A rcti c Box Camera , Bullet Camera , IR A rctic Bu llet Ca mera , Van dal Proof IP Do me and Fixed IP Ca mera ), do not over tighten the Focus and Zoom screws. The screws only need to be as tight as your finger can do it. It is not necessary to use any t ...

  • Geovision GV-UBL1301-0F - page 31

    Note for Installing Camera Outdoor When installi ng the IR A r ctic Box C amera , Bullet Camera , Ultra B ullet Camera , Targ et Bu llet Ca mera , Vandal Pr oof IP Do me , Mi ni Fixed Rugged Dome or Target Mini Fixed R ugged Do me outdoor, be sure that: 1. The camera is set up above the junction box to prevent water from enteri ng the camera along ...

  • Geovision GV-UBL1301-0F - page 32

    3. After opening the camera c over, ensure the screws are tightened and the cover is in place. 4. The silica gel bag loses its effecti veness when the dry camera is opened. To prevent the lens from fogging up, replace the silica gel bag every time you open the cam era, and conceal the gel bag in camera within 2 minutes of exposing to open air. 5. F ...

  • Geovision GV-UBL1301-0F - page 33

    XXXI Note for Closin g the B ulle t Came ra Cover To ensur e that th e c ame ra perf orms its f ull capac ity ag ainst wa ter and dust, tigh tly clos e and lock the c amera c over as in dicat ed bel ow. ...

  • Geovision GV-UBL1301-0F - page 34

    XXXII Note for USB Storage and WiFi Ad a p t e r Mind the following limit ations and requirements for using USB storage and GV-WiFi Adapter: 1. The USB hard drive must be of 2.5’’ or 3.5’’, version 2.0 or above. 2. The USB hard drive’s storage capaci ty must not exceed 2TB. 3. USB flash drives and USB hubs are not supported. 4. External p ...

  • Geovision GV-UBL1301-0F - page 35

    Chapter 1 Intro duction The GV-IPCAM H.264 series offers a comprehensive range of IP cameras supporting your needs f or IP surveillance in various environmental conditi ons. For detailed features of each model, refer to the corresponding chapter. 1.1 Sy stem Requirement To perform t he GV-IPCAM H.264 operations through W eb browser, ens ure your PC ...

  • Geovision GV-UBL1301-0F - page 36

    Chapter 2 Box Camera The Box Camera is a series of indoor IP cameras consisting of fixed focal and varifocal models in different resolutions. The Box Camera supports lens replacement and f eatures an automatic infrared-cut filt er for day and night surveillanc e. The super low lux models are c apable of displaying color live vi ew in near darkness. ...

  • Geovision GV-UBL1301-0F - page 37

    Box Camer a 2 Model No. Specifications Description GV-BX220D-3 Varifoca l Lens Auto Iris , f: 2.8 ~ 12 mm, F/1.4, 1/3’’ CS Lens 2 MP, H.264, D/N GV-BX320D-0 Auto Iris , f:3.1 ~ 8 mm, F/1.2, 1/3” CS Lens GV-BX320D-1 Auto Iris , f: 2.8 ~ 6 mm, F/1.3, 1/3’’ CS Lens 3 MP, H.264, D/N GV-BX520D Varifoca l Lens Manual Iris, f: 4.5 ~ 10 mm, F/1.6 ...

  • Geovision GV-UBL1301-0F - page 38

    Model No. Specifications Descri ption GV-BX1200-1F 1.3 MP, H.264, Low Lux, D/N GV-BX1300-1F 1.3 MP, H.264, D/N GV-BX1500-1F 1.3 MP, H.264, Super Low Lux, D/N GV-BX2400-1F 2 MP, H.264, D/N, W DR Pro GV-BX2500-1F 2 MP, H.264, Super Low Lux, D/N GV-BX3400-1F Fixed Iris, f: 8 mm, F/1.6, 1/2.5’’ CS Lens 3 MP, H.264, D/N, W DR Pro GV-BX1200-2F 1.3 MP ...

  • Geovision GV-UBL1301-0F - page 39

    Box Camer a 2 Model No. Specifications Descri ption GV-BX1200-3V 1.3 MP, H.264, Low Lux, D/N GV-BX1300-3V 1.3 MP, H.264, D/N GV-BX1500-3V 1.3 MP, H.264, Super Low Lux, D/N GV-BX2400-3V 2 MP, H.264, D/N, W DR Pro GV-BX2500-3V Auto Iris , f:2.8 ~ 12 mm, F/1.4, 1/2.7” CS Lens 2 MP, H.264, Super Low Lux, D/N GV-BX2400-4V 2 MP, H.264, D/N, W DR Pro GV ...

  • Geovision GV-UBL1301-0F - page 40

    6 2.1 Packing L ist  B ox C amera  Termin al Bl o ck  Fixed F o c al o r V arifocal Megap ixel Lens  Six Lens R ings  One 0.12 5 mm L ens Rin g (f o r GV -BX14 0D W o nly)  Video Out W ire  C a mer a Holder  P owe r Ad apter  GV-IPCA M H.264 S o f t ware CD  GV-IPCA M H.264 Q uick St art Gui de  GV-NVR S oftwar e DV ...

  • Geovision GV-UBL1301-0F - page 41

    Box Camer a 2 2.2 Feature s • Image sensor Camera Model Image Se nsor GV-BX120D GV-BX1200 Series 1/3’’ progress ive scan low lux CMOS GV-BX130D Series GV-BX1300 Series GV-BX220D Series GV-BX320D Series GV-BX520D GV-BX5300 Series 1/2.5’’ progress ive scan CMOS GV-BX140DW 1/3’’ progress ive scan CMOS GV-BX1500 Series 1/ 3’’ progress ...

  • Geovision GV-UBL1301-0F - page 42

    • Frame r ate: Camera Model Frame Rate GV-BX120D GV-BX130D Series GV-BX1200 Series GV-BX1300 Series GV-BX1500 Series Up to 30 fps at 1280 x 1024 GV-BX140DW Up to 30 fps at 1280 x 720 GV-BX220D Series GV-BX2400 Series GV-BX2500 Series Up to 30 fps at 1920 x 1080 GV-BX320D Series GV-BX3400 Series Up to 20 fps at 2048 x 1536 GV-BX520D GV-BX5300 Seri ...

  • Geovision GV-UBL1301-0F - page 43

    Box Camer a 2 2.2.1 Wid e Dynamic Range Pro Objects may appear as silhouett es when they are backed with intense lights. The Wide Dynamic Range Pro (WDR Pro) is designed t o solve this problem us ing a WDR s ensor. In GV-BX 140DW , GV-BX2400 Series and GV-BX3400 Seri es , the W DR sensor is able to process the image and show details in bright and d ...

  • Geovision GV-UBL1301-0F - page 44

    2.3 Ov ervie w 2.3.1 GV-B X120D / 130D Ser ies / 14 0DW / 220D Series / Serie s / 520D 320D 1 2 3 4 5 6 7 8 9 10 12 13 14 16 15 11 Figure 2-1 Note: 1. The A uto Iris connector (No. 7) is only functional in GV-BX120D, GV-BX130D-0, GV-BX220D and GV-BX320D. 2. The Li ght Sensor (No.11) is only available in GV-BX140DW. Keep the Light Sensor unobscured ...

  • Geovision GV-UBL1301-0F - page 45

    Box Camer a 2 No. Name Description 3 Audio Out Connects a speaker for audio output. 4 Audi o In Connects a microphone for audio input. 5 I/O Ter minal Block For details, see 2.6 I/O Terminal Block. 6 Power LED Indicates t he power is supplied. For detail, see the table below. 7 Auto Iris Connector Plug the iris cont rol cable to t he connector. 8 D ...

  • Geovision GV-UBL1301-0F - page 46

    2.3.2 GV-B X1200 Series / 1300 S eries / 1500 Series / 2400 Serie s / 250 0 Seri es / 3400 S eries / 5300 Ser ies 1 2 4 5 6 7 8 9 10 3 11 12 13 14 16 15 Figure 2-2 Note: 1. The Auto Iris Connector (No. 8) is only funct ional for varifocal models of GV-BX1200 / 1300 / 1500 / 2400 / 2500 / 3400. 2. The Iris Screw (No. 12) is only available in GV-BX53 ...

  • Geovision GV-UBL1301-0F - page 47

    Box Camer a 2 No. Name Description 4 Audi o Out Connects a speaker for audio output. 5 Audi o In Connects a microphone for audio input. 6 I/O Ter minal Block Connects to I/O devices. For details, s ee 2.6 I/O Terminal Block. 7 Power LED Indicates t he power is supplied. For detail, see the table below. 8 Auto Iris Connector Plug the iris cont rol c ...

  • Geovision GV-UBL1301-0F - page 48

    2.4 Connecting the Camera The Box Cam era is desi gned for indoor us e. Please m ake sure the installing s ite is s hielded from rain and moisture. 2.4.1 GV-B X120D / 130D Ser ies / 14 0DW / 220D Series / Serie s / 520D 320D Figure 2-3 1. If you are using an auto iris model, plug the iris control cable to the Auto Iri s Connector on the camera. 2. ...

  • Geovision GV-UBL1301-0F - page 49

    Box Camer a 2 6. Connect power using one of the following methods : • plugging the power adapter to the power port. • using the Power over Ethernet (P oE) function and the power w ill be provided over the network c able. 7. The s tatus L ED of the ca mera will be on. 8. You are ready to access the live view, adjust the image clarity and configu ...

  • Geovision GV-UBL1301-0F - page 50

    2.4.2 GV-B X1200 Series / 1300 S eries / 1500 Series / 2400 Serie s / 250 0 Seri es / 3400 S eries / 5300 Series Figure 2-4 1. If you are using an auto iris model, plug the iris control cable to the Auto Iri s Connector on the camera. 2. Connect to network using one of the following methods: • Wired Connecti on: Use a standard network cable to co ...

  • Geovision GV-UBL1301-0F - page 51

    Box Camer a 2 5. Optionally connect t o input / output devices or an infrared illuminator. For details, see 2.5.2 Infrared Il luminator and 2.6 I/O Terminal Block . 6. Connect power using one of the following methods : • plugging the power adapter to the power port. The power adapter is an optional device. For detail, see Options in the manual. ? ...

  • Geovision GV-UBL1301-0F - page 52

    2.5 A ccessory Installation 2.5.1 C-M ount Lenses If you use a C-mount lens, it requires a certai n distance from the camera’s imaging chip to focus the lens. Mount the suppli ed C-mount lens adapter / lens ring to the c amera, and then secure the lens onto the camera body. Three types of C-mount lens rings are provided for B ox Camera: • 0.188 ...

  • Geovision GV-UBL1301-0F - page 53

    Box Camer a 2 2.5.2 Infrared Illuminator s (Optional) If you u se an infra red ( IR) illu mina tor w ith I/O fun ction, follow the step s below to install it. 1. Connect the infrared illuminator to the terminal blo ck on the camera. See 2.6 The I/O Terminal Block . 2. Access the Web int erface of the camera. 3. Sele ct Video an d Motion , sele ct V ...

  • Geovision GV-UBL1301-0F - page 54

    2.6 I/O T erminal Block The terminal block, l ocated on the back panel of the Box Camera, provides the interface to one input and one output devic es. The I/O terminal block can be used for appl ications suc h as motion detection, event alerts vi a E- Mail and FTP, and center monitoring through Center V2 and VSM. 2.6.1 Pin Assign ment The pin assig ...

  • Geovision GV-UBL1301-0F - page 55

    Box Camer a 21 2 2.6.2 Connecting to GV -Relay V2 (Optional) The Box Camera can only drive a maximum load of 200mA 5V DC . To expand the maximum volt age load to 10A 250V AC , 10A 125V AC or 5A 100V DC , connect the camera to a GV-Relay V 2 module (optional product). Refer t o the figure and table below. Connect to Power Output Device I/O 12 3 Figu ...

  • Geovision GV-UBL1301-0F - page 56

    Chapter 3 Ultra Box Camera The Ultra Box Camera is a series of light-weighted cameras des igned for indoor usage. Equipped with IR-c ut filter and built-in IR LEDs, the Ultra Box Camera provides excellent image qualit y. The c amera supports P oE and can be installed i ntuitively. Nine models of varying resol utions and focal lengths are available. ...

  • Geovision GV-UBL1301-0F - page 57

    Ultra Box Camera 23 3 3.1 Packi ng List  Ultra B ox Camer a  Supporti ng r a ck  Scr ew x 3  Scr ew anchor x 3  P owe r Ad apter  GV-IPCA M H.264 S o f t ware CD  GV-IPCA M H.264 Q uick St art Gui de  GV-NVR S oftwar e DVD  GV-NVR Qu ick St art Guid e Note: The power adapt e r c an b e excluded up on requ e st. ...

  • Geovision GV-UBL1301-0F - page 58

    3.2 Feature s • 1/2.5’’ progress ive scan CMOS • Dual streams from H.264 or MJPEG • Frame rate Camera Model Frame Rate GV-UBX1301 Series Up to 30 fps at 1280 x 1024 GV-UBX2301 Series Up to 30 fps at 1920 x 1080 GV-UBX3301 Series Up to 20 fps at 2048 x 1536 • Intellige nt IR • Day and night function (with removable IR-c ut filter) • ...

  • Geovision GV-UBL1301-0F - page 59

    Ultra Box Came ra 3 3.3 Overv iew 1 3 5 6 4 2 Figure 3-1 No. Name Description 1 Audio Out Connects a speaker for audio output. 2 Default Rese ts the came ra to fa ctory de faults. See 23.3 Rest oring to Factory Default Settings . 3 LAN / Po E Connects to a 10/100 Ethernet or PoE. 4 Microphone Records s ounds. 5 M emory Card S lot Insert s a micr o ...

  • Geovision GV-UBL1301-0F - page 60

    3.4 Install ation You can stand the Ultra Box Camera on a plain surface or install it to wall and ceiling. Follow the steps below to install, conne ct and adjust your Ultra Box Camera . 1. To install the device on the wall/ceiling, put the supporting rack on the desired location and make marks for screw anchors . Figure 3-2 2. Drill the mark s and ...

  • Geovision GV-UBL1301-0F - page 61

    Ultra Box Came ra 3 5. Connect the network and power cables to the camera. See 3. 5 Connecting t he Camera . 6. Access t he live view. See 19.1 Accessing the Live View . 7. Adjust the angle of the camera based on live view and fasten t he indicat ed screw. Figure 3-4 27 ...

  • Geovision GV-UBL1301-0F - page 62

    28 3.5 Connecting the Camera 2 3 1 Figure 3-5 1. Connect power using one of the following methods : • Plug the power adapter to the 5V terminal block. The power adapter is an optional devic e. For detail, see Options in the manual. • Use the Power over Ethernet (P oE) functi on and the power w ill be provided over the network c able. The power ...

  • Geovision GV-UBL1301-0F - page 63

    Chapter 4 Targ et Box Camera The Target Box Camera (GV-EBX) is a series of light-weighted cameras designed for indoor usage. Equipped with IR  cut f ilter and built  in IR LEDs, the camera is an entry-level s urveillance solution with all the essenti al features and excellent image quality. The camera supports PoE and can be insta lled in tui ...

  • Geovision GV-UBL1301-0F - page 64

    4.2 Feature s • 1/3” progressive scan low lux CMOS for GV-EBX1100 Series • Dual streams from H.264 or MJPEG Up to 30 fps at 1280 x 1024 for GV-EBX1100 Series • Intellige nt IR • Day and night function (with removable IR-c ut filter) • Built -in microphone • Wide Dynamic Range (WDR) • Defog • Motion detection • Tampering alarm ? ...

  • Geovision GV-UBL1301-0F - page 65

    Target Box Camera 4 4.3 Overv iew Figure 4-1 No. Name Description 1 Default Rese ts the came ra to fa ctory de faults. See 23.3 Rest oring to Factory Default Settings . 2 LAN / Po E Connects to a 10/100 Ethernet or PoE. 3 Microphone Records sounds. 4 DC 12V Ter minal Block Connects to power. LED Indicator Descri ption Status LED The status LED turn ...

  • Geovision GV-UBL1301-0F - page 66

    4.4 Install ation You can stand the Target Box Camera on a plain surface or install it to wall and ceiling. Follow the steps below to install, conne ct and adjust your Target Box Camera. 1. To install the device on the wall/ceiling, put the supporting rack on the desired locat ion and make marks for screw anchors. Figure 4-2 2. Drill the mark s and ...

  • Geovision GV-UBL1301-0F - page 67

    Target Box Camera 4 5. Connect the network and power cables to the camera. See 4. 5 Connecting t he Camera . 6. Access t he live view. See 19.1 Accessing the Live View . 7. Adjust the angle of the camera based on live view and fasten t he indicat ed screw. Figure 4-4 33 ...

  • Geovision GV-UBL1301-0F - page 68

    34 4.5 Connecting the Camera 1 2 Figure 4-5 1. Connect power using one of the following methods : • Plug the power adapter to the 12V terminal block. The power adapter is an optional devic e. For detail, see Options in the manual. • Use the Power over Ethernet (P oE) functi on and the power w ill be provided over the network c able. The power a ...

  • Geovision GV-UBL1301-0F - page 69

    Chapter 5 IR Arctic Box Ca mera The IR Arctic Box Camera is a series of outdoor cameras designed for environments of extreme temperatures. The cameras adhere to IP67 and IK10 protection st andards, and are equipped with IR LEDs and removable IR-cut filter for day and night surveillance. The GV-BX 2400-E / 3400-E are equipped with W DR Pro to produc ...

  • Geovision GV-UBL1301-0F - page 70

    5.1 Packing Li st • IR Ar cti c Box Camer a • Screw Anchor x 4 • Scre w x 4 • Washer x 4 • Big Torx Wrench • Small Torx Wrench • Silica Gel Bag x 2 • GV-IPCAM H.264 Software CD • GV-IPCAM H. 264 Quick Start Guide • GV-NVR So ftw are D VD • GV-NVR Quick Start Guide Note: You c an opt ionally purchase the GV-PA481 PoE A dapter f ...

  • Geovision GV-UBL1301-0F - page 71

    IR Arctic Box Camera 5 5.2 Feature s • Image sensor Camera Model Im age Se nsor GV-BX120D-E 1/3" progressi ve scan low lux CMOS GV-BX1500-E 1/3" progressive sc an super low lux C MOS GV-BX220D-E GV-BX320D-E GV-BX520D-E GV-BX5300-E 1/3.2" progress ive scan CMOS GV-BX2400-E GV-BX3400-E 1/2.5” progress ive scan CMOS • Dual streams ...

  • Geovision GV-UBL1301-0F - page 72

    • 3D noise reudction (for GV-BX1500-E) • 2D noise reudction (except GV-BX1500-E) • Motion detection • Tampering alarm • Privac y mask • Text overlay • IP address filtering • Power supplied through PoE (IEEE 802.3at) • Megapixel lens • Support for iPhone, iPad, Android and 3GPP • 31 languages on Web interface • ONVIF (P rofil ...

  • Geovision GV-UBL1301-0F - page 73

    IR Arctic Box Camera 5 5.3 Ov ervie w 1 2 3 4 5 7 6 Figure 5-1 Note: The Iris Screw (No. 7) is only available in GV-BX520D-E and GV- BX5300-E. No. Name Description 1 S ilica gel bag Des iccant that keeps t he camera housing dry. 2 I R power plug Supplies pow er to the bui lt-in IR LEDs. 3 F ocus Sc rew Adjust s the focus of t he camera. 4 Module s ...

  • Geovision GV-UBL1301-0F - page 74

    5.4 Install ation The IR Arctic Box Camera is designed for outdoor use. 1. M ark the in stalla tion site an d dr ill fo ur hol es for screw ancho rs. 2. Insert the suppl ied screw anchors. 3. Secure the camera to the wall using the supplied washers and screws. Figure 5-2 4. Connect the camera t o the net work and suppl y power via the PoE cable. Se ...

  • Geovision GV-UBL1301-0F - page 75

    IR Arctic Box Camera 5 Til t A dju stm ent Figure 5-4 Pan A djustment Figure 5-5 7. Bas ed on the l ive view, adj ust the foc us, zoom and iris (in GV-BX520D-E and GV-BX5300-E only) of the camera. Unscrew t he cover with the suppl ied small t orx wrench. Figure 5-6 41 ...

  • Geovision GV-UBL1301-0F - page 76

    Hold the connectors and unplug them. Figure 5-7 IMPO RTANT: Uns crew and remove the cover carefully. Pulling the cover off may caus e damages to the inner wiring of the camera. Adjust the f ocus, zoom and iris screws. Figure 5-8 42 ...

  • Geovision GV-UBL1301-0F - page 77

    IR Arctic Box Camera 5 8. Replac e the sil ica gel bag. Paste the s ticker to the front si de of t he silica gel bag. P ress the s ticker several t imes to m ake sure it adheres properly. Past e the silica gel bag to the indicated place. Figure 5-9 IMPO RTANT: 1. The gel bag loses its effectiveness when the dry c amera is opened. To prevent the len ...

  • Geovision GV-UBL1301-0F - page 78

    5.5 Connecting the Camera 5.5.1 Wire Definition Figure 5-10 No. Wi re Color Definiti on 1 Black (thick) PoE 2 Black BNC TV ou t 3 Green RCA Audio Out 4 Pink RCA Audio In 1. Optionally connect a speak er (green) and an ex ternal mic rophone (pink). 2. Optionally connect a monitor using a Video Out wire. Enable this function by select ing your si gna ...

  • Geovision GV-UBL1301-0F - page 79

    IR Arctic Box Camera 5 3. Optionally connect t he camera’s cable to the GV-PA481 PoE adapter as illustrated below. The pow er and network will be supplied simultaneous ly. Ethernet Cable PoE GV-BX-E Rear Pa nel Power Hub/Rout er POWER & DAT A OU T DATA IN Figure 5-11 4. The statu s LED of the camer a will be o n. 5. You are ready to access th ...

  • Geovision GV-UBL1301-0F - page 80

    5.6 Notic e for Using t he IR A rctic Box Ca mera Ensure that you: • enable IR LED function on the W eb interface after loading the default settings. • disable the status LED to reduce reflection when a green light spot appears on the live view. 5.6.1 Enabling IR LED after Loading Default Each GV-IR Arctic Box Camera is equipped with 4 IR LEDs ...

  • Geovision GV-UBL1301-0F - page 81

    IR Arctic Box Camera 47 5 5.6.2 Disabling Status LED under Low Light Conditions If you have a green light spot on the live view, this is likely due t o insuffici ent light at the instal lation sit e, which caus es the status LED to reflect on the camera cover. In t his case, it is advisable that you disable the status LED. 1. In the left menu of We ...

  • Geovision GV-UBL1301-0F - page 82

    Chapter 6 Mini Fixed Do me & Mini Fixed Rugge d Dome The Mini Fixed Dome (GV-MFD) and Mini Fix ed Rugged Dome (GV-MDR) are fixed, mini-si zed ceiling-mount network cam eras. The GV-MDR series is designed fo r outdoor surveillance, conforming to IK10 and IP67 standards. The camera is adjustable in 3 axis (pan, tilt and rotate) and can be c onnec ...

  • Geovision GV-UBL1301-0F - page 83

    Mini Fixed & R ugged Dome 6 Mini Fixed Rugged D ome (G V-MDR ) Model No. Specifications Descrip tion GV-MDR120 Fixed Iris, f: 4.05 mm, F/1.5, 1/3’’ M12 Mount 1.3 MP, H.264, Low Lux, Color GV-MDR220 GV-MDR320 GV-MDR520 Fixed Iris, f: 2.54 mm, F/2.8, 1/2.5’’ M12 Mount 2 MP / 3 MP / 5M P, H.264, Color GV-MDR1500-0F GV-MDR2400-0F GV-MDR2500 ...

  • Geovision GV-UBL1301-0F - page 84

    Mi ni Fi xed Do me ( GV-M FD) Model No. Specifications Descri ption GV-MFD120 Fixed Iris, f: 4 mm, F/1.5, 1/3’’ M12 Mount 1.3 MP Low Lux, H.264, Color GV-MFD130 GV-MFD220 GV-MFD320 GV-MFD520 Fixed Iris, f: 2.54 mm, F/2.8, 1/2.5’’ M12 Mount 1.3 MP / 2 MP / 3 MP / 5MP, H.264, Color GV-MFD1501-0F GV-MFD2401-0F GV-MFD2501-0F GV-MFD3401-0F GV-MF ...

  • Geovision GV-UBL1301-0F - page 85

    Mini Fixed & Ru gged Dome 51 6 6.1 Packi ng List  Mini Fixed D ome or Mini Fixed R ugged D ome wit h 3 options f o r its LAN c onnector ( M12, W a te rpr oo f or Non-W a terproof)  Torx W rench  S e lf T apping Sc rew x 2  Scr ew Anchor x 2  C a bl e st opper  2-pin t e r minal bl o c k (f o r G V-MFD1 20 / 13 0 / 220 / 320 / ...

  • Geovision GV-UBL1301-0F - page 86

    6.2 Feature s • Image sensor GV-MFD Camera Model Image Se nsor GV-MFD120 1/3’’ progress ive scan low lux CMOS GV-MFD130 GV-MFD220 GV-MFD320 GV-MFD520 1/2.5’’ progress ive scan CMOS GV-MFD1501 series 1/3’ ’ progressive scan super low lux CMOS GV-MFD2501 series 1/2.8’’ progress ive scan super low lux CMOS GV-MFD2401 series GV-MFD340 ...

  • Geovision GV-UBL1301-0F - page 87

    Mini Fixed & R ugged Dome 6 • Fra me rate GV-MFD Camera Model Fram e Rate GV-MFD120 GV-MFD130 GV-MFD1501 series Up to 30 fps at 1280 x 1024 GV-MFD220 GV-MFD2401 series GV-MFD2501 series Up to 30 fps at 1920 x 1080 GV-MFD320 GV-MFD3401 series Up to 20 fps at 2048 x 1536 GV-MFD520 GV-MFD5301 series Up to 10 fps at 2560 x 1920 GV-MDR Camera Mode ...

  • Geovision GV-UBL1301-0F - page 88

    • Ingress protecti on (IP67 for GV-MDR series only) • EN50155 compliance for rolling stock applicat ions (for GV-MDR series only) • Endurable to low environment temperatures (-30° C ~ 50°C / -22°F ~ 122°F) (for GV-MDR series onl y) • 2-axis mechanism (GV-MFD seri es); 3-axis mechanism (GV-MDR series) Camera Ty pe Pan T ilt Ro tate GV-MF ...

  • Geovision GV-UBL1301-0F - page 89

    Mini Fixed & R ugged Dome 6 6.3 Ov ervie w 6.3.1 GV-M FD120 / 13 0 / 2 20 / 320 / 520 1 2 4 3 5 6 7 Figure 6-1 No. Nam e Description 1 Default Button Resets the camera t o factory default. See 23.3 Restoring t o Factory Default Settings . 2 Lens Receives image inputs. 3 Tilt Screw Loosens the screw to adjust til t angle. 4 Microphone Provides o ...

  • Geovision GV-UBL1301-0F - page 90

    LED Name Description 1. Link Turns on when the network is connected. 2. ACT Turns on when data are being transmitted. 3. PWR Turns on when power is on. 4. SW RDY (Status) Turns on when the system is ready. 56 ...

  • Geovision GV-UBL1301-0F - page 91

    Mini Fixed & R ugged Dome 6 6.3.2 GV-M FD 1501 Series / 2401 S eries / 25 01 Ser ies / 3401 Serie s / 530 1 Seri es 1 2 3 4 5 6 7 8 9 Figure 6-2 No. Nam e Description 1 Microphone Rec eives s ound. 2 Pan Screw Loos ens the sc rew to pan. 3 Lens Receives image inputs. 4 Tilt Screw Loos ens the screw to adjust tilt angle. 5 Default B utton Rese t ...

  • Geovision GV-UBL1301-0F - page 92

    1 2 3 4 Figure 6-3 LED Name Descripti on 1. Link Turns on (green) w hen the network is connected. 2. ACT Turns on (orange) when data are being transmitted. 3. Status Turns on (red) when the system is ready. 4. Power Turns on (green) when pow er is on. Note: For details on limitati ons and requirements of the USB port, refer to Note for USB Storage ...

  • Geovision GV-UBL1301-0F - page 93

    Mini Fixed & R ugged Dome 6 6.3.3 GV-M DR 1 2 3 4 5 6 7 8 9 10 11 Figure 6-4 No. Name Description 1 Silica gel bag Absorbs t he moisture inside the camera. 2 Conceal paper Prevents water or m oisture from entering the camera. 3 Lens Receives image inputs. 4 Rotation Disc Rotat es the camera lens. 5 Pan Disc Pans t he camera lens. 6 Tilt Screw L ...

  • Geovision GV-UBL1301-0F - page 94

    No. Name Description 8 Default B utton Rese ts the came ra to fa ctory defa ult. See 23.3 Restoring t o Factory Default Settings . 9 Power and status LED Turns red when the power is on. Flashes orange light twice when the syst em is ready. 10 LAN LED Turns on when the network is connected. 11 Memory Card Slot Insert s a micr o SD ca rd (SD /SDH C, ...

  • Geovision GV-UBL1301-0F - page 95

    Mini Fixed & R ugged Dome 6 2. Waterproof Con nector For this connector type, see 6.4.2 GV -MDR to install the supplied cable connect or. Ø27 mm (1.06'') 3. Non-waterproof (Sma ller) Connector 13.8 mm (0.54' ') 16.8 mm ( 0.66'') 61 ...

  • Geovision GV-UBL1301-0F - page 96

    6.4 Install ation To install a Mini Fixed Dome, make sure the installing site is shielded from rain and moisture. 6.4.1 GV-M FD Serie s 1. Unscrew the housing cover usi ng the supplied torx wrench. 2. Put the camera on the desired location and make 2 marks on the ceiling for sc rew anchors. If you want to run the cables inside the ceiling, m ake a ...

  • Geovision GV-UBL1301-0F - page 97

    Mini Fixed & R ugged Dome 6 8. Adjust image cl arity using the GV-IP Devic e Utility program. For details, s ee 19.3 Adjusti ng Image Clarity . 9. Insert a Micro SD card (SD/S DHC, version 2.0 only, Class 10) into the memory card slot (No. 7, Figure 6-1). 10. Secure the housing cover usi ng the supplied torx wrench. 11. Optional ly conceal t he ...

  • Geovision GV-UBL1301-0F - page 98

    6.4.2 GV-M DR Serie s 1. Paste the instal lation sticker on the desired location. The arrow should point toward the direct ion that the camera faces. 2. Drill one hole on each of the two curves for screw anchors. Drill the circle (30 mm in diameter) if you want to run the cable into the ceiling. Drill a hole on each 30 mm Figure 6-8 3. Insert the s ...

  • Geovision GV-UBL1301-0F - page 99

    Mini Fixed & R ugged Dome 6 6. Install the cable connect or to waterproof the cable. You should have 5 parts: 1 2 3 4 5 Figure 6-10 A. Prepare an Ethernet cable with the RJ -45 connector on one end only. Figure 6-11 B. Connect the Et hernet cable t o the camera c able. C. Paste the sticker to the camera cable and slide i n all the components as ...

  • Geovision GV-UBL1301-0F - page 100

    ...

  • Geovision GV-UBL1301-0F - page 101

    ...

  • Geovision GV-UBL1301-0F - page 102

    ...

  • Geovision GV-UBL1301-0F - page 103

    ...

  • Geovision GV-UBL1301-0F - page 104

    ...

  • Geovision GV-UBL1301-0F - page 105

    ...

  • Geovision GV-UBL1301-0F - page 106

    ...

  • Geovision GV-UBL1301-0F - page 107

    ...

  • Geovision GV-UBL1301-0F - page 108

    ...

  • Geovision GV-UBL1301-0F - page 109

    ...

  • Geovision GV-UBL1301-0F - page 110

    ...

  • Geovision GV-UBL1301-0F - page 111

    ...

  • Geovision GV-UBL1301-0F - page 112

    ...

  • Geovision GV-UBL1301-0F - page 113

    ...

  • Geovision GV-UBL1301-0F - page 114

    ...

  • Geovision GV-UBL1301-0F - page 115

    ...

  • Geovision GV-UBL1301-0F - page 116

    ...

  • Geovision GV-UBL1301-0F - page 117

    ...

  • Geovision GV-UBL1301-0F - page 118

    ...

  • Geovision GV-UBL1301-0F - page 119

    ...

  • Geovision GV-UBL1301-0F - page 120

    ...

  • Geovision GV-UBL1301-0F - page 121

    ...

  • Geovision GV-UBL1301-0F - page 122

    ...

  • Geovision GV-UBL1301-0F - page 123

    ...

  • Geovision GV-UBL1301-0F - page 124

    ...

  • Geovision GV-UBL1301-0F - page 125

    ...

  • Geovision GV-UBL1301-0F - page 126

    ...

  • Geovision GV-UBL1301-0F - page 127

    ...

  • Geovision GV-UBL1301-0F - page 128

    ...

  • Geovision GV-UBL1301-0F - page 129

    ...

  • Geovision GV-UBL1301-0F - page 130

    ...

  • Geovision GV-UBL1301-0F - page 131

    ...

  • Geovision GV-UBL1301-0F - page 132

    ...

  • Geovision GV-UBL1301-0F - page 133

    ...

  • Geovision GV-UBL1301-0F - page 134

    ...

  • Geovision GV-UBL1301-0F - page 135

    ...

  • Geovision GV-UBL1301-0F - page 136

    ...

  • Geovision GV-UBL1301-0F - page 137

    ...

  • Geovision GV-UBL1301-0F - page 138

    ...

  • Geovision GV-UBL1301-0F - page 139

    ...

  • Geovision GV-UBL1301-0F - page 140

    ...

  • Geovision GV-UBL1301-0F - page 141

    ...

  • Geovision GV-UBL1301-0F - page 142

    ...

  • Geovision GV-UBL1301-0F - page 143

    ...

  • Geovision GV-UBL1301-0F - page 144

    ...

  • Geovision GV-UBL1301-0F - page 145

    ...

  • Geovision GV-UBL1301-0F - page 146

    ...

  • Geovision GV-UBL1301-0F - page 147

    ...

  • Geovision GV-UBL1301-0F - page 148

    ...

  • Geovision GV-UBL1301-0F - page 149

    ...

  • Geovision GV-UBL1301-0F - page 150

    ...

  • Geovision GV-UBL1301-0F - page 151

    ...

  • Geovision GV-UBL1301-0F - page 152

    ...

  • Geovision GV-UBL1301-0F - page 153

    ...

  • Geovision GV-UBL1301-0F - page 154

    ...

  • Geovision GV-UBL1301-0F - page 155

    ...

  • Geovision GV-UBL1301-0F - page 156

    ...

  • Geovision GV-UBL1301-0F - page 157

    ...

  • Geovision GV-UBL1301-0F - page 158

    ...

  • Geovision GV-UBL1301-0F - page 159

    ...

  • Geovision GV-UBL1301-0F - page 160

    ...

  • Geovision GV-UBL1301-0F - page 161

    ...

  • Geovision GV-UBL1301-0F - page 162

    ...

  • Geovision GV-UBL1301-0F - page 163

    ...

  • Geovision GV-UBL1301-0F - page 164

    ...

  • Geovision GV-UBL1301-0F - page 165

    ...

  • Geovision GV-UBL1301-0F - page 166

    ...

  • Geovision GV-UBL1301-0F - page 167

    ...

  • Geovision GV-UBL1301-0F - page 168

    ...

  • Geovision GV-UBL1301-0F - page 169

    ...

  • Geovision GV-UBL1301-0F - page 170

    ...

  • Geovision GV-UBL1301-0F - page 171

    ...

  • Geovision GV-UBL1301-0F - page 172

    ...

  • Geovision GV-UBL1301-0F - page 173

    ...

  • Geovision GV-UBL1301-0F - page 174

    ...

  • Geovision GV-UBL1301-0F - page 175

    ...

  • Geovision GV-UBL1301-0F - page 176

    ...

  • Geovision GV-UBL1301-0F - page 177

    ...

  • Geovision GV-UBL1301-0F - page 178

    ...

  • Geovision GV-UBL1301-0F - page 179

    ...

  • Geovision GV-UBL1301-0F - page 180

    ...

  • Geovision GV-UBL1301-0F - page 181

    ...

  • Geovision GV-UBL1301-0F - page 182

    ...

  • Geovision GV-UBL1301-0F - page 183

    ...

  • Geovision GV-UBL1301-0F - page 184

    ...

  • Geovision GV-UBL1301-0F - page 185

    ...

  • Geovision GV-UBL1301-0F - page 186

    ...

  • Geovision GV-UBL1301-0F - page 187

    ...

  • Geovision GV-UBL1301-0F - page 188

    ...

  • Geovision GV-UBL1301-0F - page 189

    ...

  • Geovision GV-UBL1301-0F - page 190

    ...

  • Geovision GV-UBL1301-0F - page 191

    ...

  • Geovision GV-UBL1301-0F - page 192

    ...

  • Geovision GV-UBL1301-0F - page 193

    ...

  • Geovision GV-UBL1301-0F - page 194

    ...

  • Geovision GV-UBL1301-0F - page 195

    ...

  • Geovision GV-UBL1301-0F - page 196

    ...

  • Geovision GV-UBL1301-0F - page 197

    ...

  • Geovision GV-UBL1301-0F - page 198

    ...

  • Geovision GV-UBL1301-0F - page 199

    ...

  • Geovision GV-UBL1301-0F - page 200

    ...

  • Geovision GV-UBL1301-0F - page 201

    ...

  • Geovision GV-UBL1301-0F - page 202

    ...

  • Geovision GV-UBL1301-0F - page 203

    ...

  • Geovision GV-UBL1301-0F - page 204

    ...

  • Geovision GV-UBL1301-0F - page 205

    ...

  • Geovision GV-UBL1301-0F - page 206

    ...

  • Geovision GV-UBL1301-0F - page 207

    ...

  • Geovision GV-UBL1301-0F - page 208

    ...

  • Geovision GV-UBL1301-0F - page 209

    ...

  • Geovision GV-UBL1301-0F - page 210

    ...

  • Geovision GV-UBL1301-0F - page 211

    ...

  • Geovision GV-UBL1301-0F - page 212

    ...

  • Geovision GV-UBL1301-0F - page 213

    ...

  • Geovision GV-UBL1301-0F - page 214

    ...

  • Geovision GV-UBL1301-0F - page 215

    ...

  • Geovision GV-UBL1301-0F - page 216

    No. Name Description 8 Rotat ional Screw Loos ens to adjust the camera angle. 9 Zoom Sc r ew Ad ju st s t he z oom of th e c ame ra. 10 F ocus Sc rew Adjust s the focus of the cam era. 11 S ilica Gel B ag A bsorbs moisture in the cam era body. 182 ...

  • Geovision GV-UBL1301-0F - page 217

    Vandal Proof IP Dome (Part I) 14 14.4 Insta llation The Vandal Proof IP Dome is designed for outdoors. With the standard package, there are two ways to instal l the Vandal Proof IP Dome: hard - ceiling mount and in-c eilin g mo unt . Note: Y ou can also install the c amera: • on a power box (of the 4" square and double gang type) using the s ...

  • Geovision GV-UBL1301-0F - page 218

    14.4.1 H ard-Ceil ing M ount Figure 14-2 1. Unpack the camera package and take out t he camera body. Unscrew the housing cover Unscrew thread lock 184 ...

  • Geovision GV-UBL1301-0F - page 219

    Vandal Proof IP Dome (Part I) 14 Unscrew the inner housing Take out the camera body 185 ...

  • Geovision GV-UBL1301-0F - page 220

    2. Mark the positi on of four screw holes on the desired inst allation location, and drill holes in the marked locations. Drill the ellipse part if you wish to put the wires through it. Figure 14-3 3. Insert the screw anchor s to the 4 hole s on the ceiling . 4. Secur e th e ba ck cove r to th e ce iling with 4 ceilin g screw s. Figure 14-4 5. Refe ...

  • Geovision GV-UBL1301-0F - page 221

    Vandal Proof IP Dome (Part I) 14 7. Connect the net work, power and ot her c ables to the cam era. See 14.5 Connecting t he Camera . 8. Access t he live view. See 19.1 Accessing the Live View . 9. Based on the live view, adjust the camera to a desired angle as illustrate d below . Tip : The 3-axis mechani sm offers f lexible and eas y inst allation ...

  • Geovision GV-UBL1301-0F - page 222

    Rotational A djustment Figure 14-7 10. Adjust image cl arity using the GV-IP Devic e Utility program. For details, s ee 19.2 Adjusti ng Image Clarity . 11. Screw on the thread lock as shown in step 1. 12. Replace the silica gel bag on the camera body within 2 minutes of opening the silica gel bag package. 13. Sec ure the housi ng cover t o the cam ...

  • Geovision GV-UBL1301-0F - page 223

    Vandal Proof IP Dome (Part I) 14 14.4.2 In-Ceiling Mount Figure 14-8 1. Follow step 1 in 14.4.1 Hard-Ceiling Mount se ction to r emov e the housing cover, t hread lock and back cover, and take out the camera body. 2. Cut out a circle with a dia meter of 142 mm on the ce iling. 3. Insert a blue screw to the indic ated holes on the camera body. Figur ...

  • Geovision GV-UBL1301-0F - page 224

    4. Screw in a plastic clip to the blue screw, hold it with one hand and use a screw driver to rotate the blue screw until t he plastic clip moves half way down. Plas tic Clip Figure 14-10 5. Secure a T-cap on top of the blue screw w ith a smal l screw cap and a T-cap sc rew. Do not tighten the sm all screw cap so that the plastic clip c an move dow ...

  • Geovision GV-UBL1301-0F - page 225

    Vandal Proof IP Dome (Part I) 14 7. Inse rt the ca mera to the ceiling wi th the p last ic scre ws moved in wa rd. Figure 14-12 8. Move the blue screws out and rotate the blue screw with a screw driver until t he plastic clip and the bottom of the camera body clamps the ceiling tight ly. Figure 14-13 9. Connect the net work, power and ot her c able ...

  • Geovision GV-UBL1301-0F - page 226

    14.5 Connecting t he Camera Connect your Vandal Proof IP Dom e to pow er, network and other cables needed. 14.5.1 Wir e Definitio n The cables of Vandal Proof IP Dome are illustrated and defined bel ow. Et h ern et ( P o E) T V out A udi o out ( gr e en) A udi o i n ( r ed) Di gi t al i n ( or agne ) Gr ound ( yel l o w ) D i gi t a l out ( br own) ...

  • Geovision GV-UBL1301-0F - page 227

    Vandal Proof IP Dome (Part I) 14 14.5.2 Po wer Co nnection There are two ways to supply power to the camera: • Use a Power over Ethernet (PoE) adapter to connect the camera t o the network, and the power will be provided at the same time. • Plug the power adapter to the 12V terminal block as shown below. The power adapter is an optional device. ...

  • Geovision GV-UBL1301-0F - page 228

    194 14.5.3 Voltage Load Expansion (Optiona l) The camera can only drive a maximum load of 200m A 5V DC . To expand the maximum voltage load to 10A 250V AC , 10A 125V AC or 5A 100V DC , connect the camera to a GV-Relay V2 module (optional product ). Refer to the figure and table below. Output Devices Connect to Power Figure 14-17 GV-Rela y V2 Vandal ...

  • Geovision GV-UBL1301-0F - page 229

    Chapter 15 Van dal Proof IP Do me (Part II) This chapter describes t he features, physical overview and inst allation of GV-VD1530 / 2430 / 2530 / 3430, GV-V D1540 / 2440 / 2540 / 3440 / 5340 and GV-VD2540-E / 5340-E. These Vandal Proof IP Domes are outdoor cameras designed with IK10+ vandal resist ance and IP67 ingress protection. They provide sup ...

  • Geovision GV-UBL1301-0F - page 230

    Model No. Specifi cation Description GV-VD1530 GV-VD2430 GV-VD2530 GV-VD3430 Varifoca l lens 1.3 MP Super Low Lux / 2 MP W DR Pro / 2 MP Super Low Lux / 3 MP WDR Pro, H.264, Vandal Proof IP Dome GV-VD1540 GV-VD2440 GV-VD2540 GV-VD3440 Motorized varifo cal lens, high power IR LEDs 1.3 MP Super Low Lux / 2 MP W DR Pro / 2 MP Super Low Lux / 3 MP WDR ...

  • Geovision GV-UBL1301-0F - page 231

    Vandal Proof IP D ome (Part II) 15 15.1 Packing L ist • Vandal Proof IP Dome • Torx Wrench • 3-Pin Terminal Block • Audio wires • Power Adapter • TV ou t wire • RJ-45 Connector x 2 • Back Plate • Focus Adjustment Cap (for GV-VD1530 / 2430 / 2530 / 3430 only) 197 ...

  • Geovision GV-UBL1301-0F - page 232

    198  Installati on stick er 1 1 1 Ceiling mount template  Scr ew Anchor x 4  Long Scr ew x 4  Flat Scr ew  Short Scr ew x 2  Silica G el Bag x 2  Sticker (f or Silic a Gel B ag)  Ruler  C o nduit C onvert er  Plastic PG 21 c onduit connect o r  P owe r Ad epter  GV-IPCA M H.264 S o f t ware CD  GV-IPCA M H.264 ...

  • Geovision GV-UBL1301-0F - page 233

    Vandal Proof IP Dome ( Part II) 199 1 5 Note: You c an ch oose t o run th e wires t hrough a conduit p ipe. Aft er you have thread ed al l the wire s , inst all the su pplied c onduit c onverter and plastic PG2 1 c onduit c onne c t o r with a s el f-pr epar ed 1/2’ ’ conduit pipe to the c amera. Pow er will h ave to be suppl ied thr ough a PoE ...

  • Geovision GV-UBL1301-0F - page 234

    15.2 Featur es • Image sensor Camera Model Image Sensor GV-VD1530 / 1540 1/3" progressive scan super low lux CMOS GV-VD2430 / 2440 GV-VD3430 / 3440 1/3.2" progress ive scan CMOS GV-VD2530 / 2540 GV-VD2540-E 1/2.8’’ progressive sc an super l ow lux CMOS GV-VD5340 GV-VD5340-E 1/2.5’’ progress ive scan CMOS • Minimum illumination ...

  • Geovision GV-UBL1301-0F - page 235

    Vandal Proof IP D ome (Part II) 15 • Ingress protection (IP 67 rating) • Wide temperature tolerance: -40°C ~ 50°C / -40°F ~ 122°F (for GV-VD2540-E / 5340-E) • 3-axis m echanism (pan / tilt / roll) • Micro S D card slot (SD/SDHC) f or local storage • Two-way audio • One sensor input and alarm output • TV-out support • 3D noise re ...

  • Geovision GV-UBL1301-0F - page 236

    15.3 Ov ervie w 1 2 3 4 5 6 8 7 9 10 12 11 13 14 Figure 15-1 202 ...

  • Geovision GV-UBL1301-0F - page 237

    Vandal Proof IP D ome (Part II) 15 No. Name Description 1 LED I ndicators The power LED (top) turns on (green) when the power is on and turns off when there is no power supply. The status LED (bottom ) turns on (green) when the system operates normall y and turns off when system error occur s. 2 Audi o In Connect s to a microphone for audio output. ...

  • Geovision GV-UBL1301-0F - page 238

    15.4 Insta llation The Vandal Proof IP Dome is designed for outdoors. With the standard package, you can install the came ra on the ceiling. Note: Y ou can also install the c amera: • on a power box (of the 4" square and double gang type) using the standard package • to ceilings, wall corners (concave or convex ), and poles using optional ...

  • Geovision GV-UBL1301-0F - page 239

    Vandal Proof IP D ome (Part II) 15 B. Unplug the conduit connector inside the housing and disi ntegrate the connector. Y ou should have 4 parts: 1 2 3 4 Figure 15-3 C. Remove the terminal bl ock from the pow er adapter. D. Thread the audio wires (optional), TV out wire (optional), adapt er wires and I/O wires (optional) through t he conduit entry a ...

  • Geovision GV-UBL1301-0F - page 240

    2.6 mm: Audio, BNC 2 mm: DC12V / AC24V 1.8 mm: DIDO Figure 15-5 IMPORT A NT: 1. Use the supplied ruler and l eave about 10 cm of pow er and I/O wires between their connect ors and the cable seal; leave at least 11 cm of audio/TV-out wires between their c onnectors and the c able seal. 2. The plugs are used to prevent water from entering t he camera ...

  • Geovision GV-UBL1301-0F - page 241

    Vandal Proof IP D ome (Part II) 15 3. Inst all the Et hernet cabl e. A. Rotate to remove the indicated cap and the plug inside. Figure 15-6 B. Thread an Ethernet cable (t he end w ith no RJ -45 connector) from the back panel t hrough the cable seal Figure 15-7 IMPORT A NT: Us e the supplied ruler and leave about 11 cm of the Ethernet cable between ...

  • Geovision GV-UBL1301-0F - page 242

    4. Connect the wires to the camera. A. Install the terminal blocks to the pow er adapt er and I/O devices. See 15.5.1 P ower Connection and 15.5.2 I/O Device Connections. B. Inst all the s upplied RJ-45 c onnector t o the Ethernet cable. C. Plug all the connectors to the camera panel. Tip : Unsc rew the indicated screws and lift the camera to help ...

  • Geovision GV-UBL1301-0F - page 243

    Vandal Proof IP D ome (Part II) 15 5. Sort out the wires at the back. You can have the wires come out from positi on A, B or bo th. The instructions here desc ribe sorting wires for position A. A B Figure 15-8 From the back of the camera housing, unscrew and rotate the plate to one side, sort out the wires and secure the plate back. Plat e Figure 1 ...

  • Geovision GV-UBL1301-0F - page 244

    6. Secure the back plate to the ceiling . A. Paste the sti cker to the ceiling . The arro w on the stic ker indi cate s the direct ion that the camera f aces. 1 1 1 Ceiling mount template A B Figure 15-10 B. Drill 3 holes for screws. The recommended ones are indicated as ‘1’. C. Insert the screw anchors to the 3 holes. D. Depending on how you w ...

  • Geovision GV-UBL1301-0F - page 245

    Vandal Proof IP D ome (Part II) 15 7. Sec ure the camera t o the ceil ing. A. Secure the s afety lock to the c amera usi ng a short s crew. Use flat screw for number 1 and small screw for number 2. 1 2 Figure 15-11 B. Thread al l the wires into the ceiling and connect them. Note: To use the TV out function, connect the black BNC connect or to a mon ...

  • Geovision GV-UBL1301-0F - page 246

    C. Secure the c amera using t he torx wrenc h Figure 15-12 8. Access t he live view. See 19.1 Accessing the Live View . 9. Adjust the camera’s angl e, focus and zoom of the camera. Pan A djustment Figure 15-13 212 ...

  • Geovision GV-UBL1301-0F - page 247

    Vandal Proof IP D ome (Part II) 15 Tilt A d jus tment Figure 15-14 Rotational A djustment Figure 15-15 213 ...

  • Geovision GV-UBL1301-0F - page 248

    10. Replace the silica gel bag and secure the cam era cover using the torx wre nc h . IMPORT A NT: 1. The gel bag loses its effectiveness when the dry c amera is opened. To prevent the lens from fogging up, replace the silica gel bag every time you open the camera and conceal the silica gel bag within 2 minutes of exposing to open air. 2. For each ...

  • Geovision GV-UBL1301-0F - page 249

    Vandal Proof IP D ome (Part II) 15 15.5 Connecting t he Camera Connect your Vandal Proof IP Dom e to pow er, network and other wires needed. 15.5.1 Po wer Co nnection There are two ways to supply power to the camera: • Use a Power over Ethernet (PoE) adapter to connect the camera t o the network, and the power will be provided at the same time. ? ...

  • Geovision GV-UBL1301-0F - page 250

    216 15.5.3 Voltage Load Expansion (Optiona l) The camera can only drive a maximum load of 200m A 5V DC . To expand the maximum voltage load to 10A 250V AC , 10A 125V AC or 5A 100V DC , connect the camera to a GV-Relay V2 module (optional product ). Refer to the figure and table below. Output Devices Connect to Power I/O 12 3 Figure 15-18 GV-Rela y ...

  • Geovision GV-UBL1301-0F - page 251

    Chapter 16 Fix ed IP Dome The Fixed IP Dome is a series of indoor camera designed with 3-axis mechanism for easy and flexible inst allation. The Fixed IP Dome features IR LED for in frare d illumina tion fo r nig ht surv eillance. The WDR Pro models can produce clear image for sc enes containing contrast ing intensity of lights (s ee 2.2.1 Wide Dyn ...

  • Geovision GV-UBL1301-0F - page 252

    Model No. Specification Description GV-FD1210 1.3 MP Low Lux, H.264, D/N, 3x Optical Zoom, Fix ed IP Do me GV-FD1510 GV-FD2510 1.3 MP / 2 MP Super Low Lux, H.264, D/N, 3x Optical Zoom, Fix ed IP Dome GV-FD2410 GV-FD3410 Motorized varifoc al Lens Auto Iris, f: 3 ~ 9 mm, F/1.2, 1/2.7’’ ø 14 mm Mount 2 MP / 3 MP, H.264, D/N, W DR Pro, 3x Optical ...

  • Geovision GV-UBL1301-0F - page 253

    Fixed IP Dome 219 1 6 16.1 Pack ing List 16.1.1 Pack ing L ist for Har d-Ceili ng Mou nt  Fixed IP Dome  Torx W ren ch  Mounting Plat e  Short Scr ew Anc hor x 3  C e iling Scr ew x 3  Plate Scr ew x 3  TV-out W ire  Sticker  P owe r Ad apter  GV-IPCA M H.264 S o f t ware CD  GV-IPCA M H.264 Q uick Start Gu ide  ...

  • Geovision GV-UBL1301-0F - page 254

    16.1.2 Packing List for In-Ceiling Mount • In-Ceiling Housi ng Cover • Mounting Plate • Mounting Bracket x 3 • Copper Pillar x 3 • Copper Pillar Screw x 6 • Bracket Screw x 3 • Thread Lock Screw • Housing Cover Thread • Sticker (In-Ceil ing Mount) 220 ...

  • Geovision GV-UBL1301-0F - page 255

    Fixed IP Dome 16 16.2 Featur es • Image sensor Camera Model Im age Se nsor GV-FD120D GV-FD1200 / 1210 1/3’’ progress ive scan low lux CMOS GV-FD1500 / 1510 1/3’’ progressive scan super low lux CMOS GV-FD2500 / 2510 1/2.8’’ progressive sc an super l ow lux CMOS GV-FD2400 / 2410 GV-FD3400 / 3410 1/3.2’’ progress ive scan CMOS GV-FD2 ...

  • Geovision GV-UBL1301-0F - page 256

    • 3-axis m echanism (pan / tilt / roll) • Bu il t -i n IR LE D • Micro S D card slot (SD/SDHC) f or local st orage • Two-way audio • One sensor input and alarm output • TV-out support • 3D noise reduction (for GV-FD1500 / 1510 / 2500 / 2510) • 2D noise reduction (except for GV-FD1500 / 1510 / 2500 / 2510) • Motion detection • Ta ...

  • Geovision GV-UBL1301-0F - page 257

    Fixed IP Dome 16 16.3 Ov ervie w 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Figure 16-1 No. Name Description 1 F ocus Sc rew Adjust s the focus of t he camera. 2 Zoom Sc r ew Adjus ts th e zoom o f t he c am era . 3 Rot ational S crew Loosens t o adjust t he camera angle. 4 Ti lt Screw Loosens the screw to tilt the c amera. 5 Pan Disc Loosens to pan the c ...

  • Geovision GV-UBL1301-0F - page 258

    No. Name Description 9 A udio In Connects a microphone for audio input. 10 Audio Out Connects a speaker for audio output. 11 LAN / PoE Connec ts to a 10/100 Ethernet or PoE. 12 I/O Terminal Block Connects I/O devices. For details, see 13.6 I/O Terminal Block . 13 DC 12V Port Connec ts to power. 14 Status LED Turns on (green) when the system operate ...

  • Geovision GV-UBL1301-0F - page 259

    Fixed IP Dome 16 16.4 Insta llation The Fixed IP Dome is designed for indoors. W ith the standard packing, there are three ways to instal l the Fixed IP Dome: hard-ceil ing mount , in- ceiling mount and wall-surface mount . Note: You may als o install the camera to ceilings, wall corners (concave or convex), and poles with opt ional mounting kits. ...

  • Geovision GV-UBL1301-0F - page 260

    2. Unpack the camera package and take out t he camera body. A. Use t he torx wrench to loosen t he housing c over at the f ront and the back. Figure 16-3 B. Take out the c amera body Figure 16-4 3. Sec ure the camera body to the mounting plate with three c eiling screw s. Figure 16-5 226 ...

  • Geovision GV-UBL1301-0F - page 261

    Fixed IP Dome 16 4. Connect the net work, power and ot her c ables to the cam era. See 16.5 Connecting t he Camera . 5. Access t he live view. See 19.1 Accessing the Live View . 6. Based on the live view, adjust the camera to a desired angle as illustrate d below . Tip : The 3-axis mechanism offers flexible and easy ceiling / wall installat ion. Pa ...

  • Geovision GV-UBL1301-0F - page 262

    Rotational A djustment Figure 16-8 7. Adjust image cl arity using the GV-IP Devic e Utility program. For details, s ee 19.2 Adjusti ng Image Clarity . 8. Sec ure the housing c over as shown in st ep 2. Rem ove the indic ated part when necessary. Figure 16-9 Note: Ad just the black mask inside the housing cover to mak e sure the camera view is not o ...

  • Geovision GV-UBL1301-0F - page 263

    Fixed IP Dome 16 16.4.2 In-Ceiling Mount Figure 16-10 1. Follow step 2 in the 16.4.1 Hard-Ceiling Mount t o re move t he housing cover and take out the camera body. 2. Paste the supplied sticker ont o a desired location on the ceiling and cut a circle on the ceiling along the edge of the sticker. 3. On the mounting plate, locate the 3 holes labeled ...

  • Geovision GV-UBL1301-0F - page 264

    4. From the side with the numbering, secure the copper pillars with 3 copper pillar screws. Figure 16-12 5. Place the 3 mounting brackets at the indent next to the copper pillars (labeled as 2 on the mounting plate) and secure them using the 3 bra cket scr ew s. Figure 16-13 230 ...

  • Geovision GV-UBL1301-0F - page 265

    Fixed IP Dome 16 6. Place the mounting plate on the camera body with the copper pillars inserted in the locations indicat ed below . The arrow on the mounting plate should be pointing toward the front of the ca mera. Figure 16-14 7. From the bottom of the camera, secure the copper pillars us ing the 3 copper pillars screws. 8. Place the camera into ...

  • Geovision GV-UBL1301-0F - page 266

    11. Connect the net work, power and other c ables to the cam era. See 16.5 Connecting t he Camera . 12. Access t he live view. See 19.1 Accessing the Live View . 13. Follow steps 6 and 7 in 16.4.1 Hard - Ceiling Mount sect ion to adjust the angle, focus and zoom of the camera. 14. Use the housing cover thread and the thread lock sc rew to attach th ...

  • Geovision GV-UBL1301-0F - page 267

    Fixed IP Dome 16 16.4.3 Wall- Surfac e M ount Figure 16-18 1. Follow step 2 in 16.4.1 Hard-Ceiling Mount se ction to r emov e the housing cover and take out the camera body. 2. Paste the supplied sticker onto a d esired location on the wall. Drill th e three red dots, and the ellipse mark only if you w ish to run the wires into the w all. 3. Insert ...

  • Geovision GV-UBL1301-0F - page 268

    5. Access t he live view. See 19.1 Accessing the Live View . 6. Follow steps 6 and 7 in 16.4.1 Hard - Ceiling Mount sect ion to adjust the angle, focus and zoom of the camera. 7. Follow step 8 in 16.4.1 Hard-Ceiling Mount se ction to secu re the housing cover. 234 ...

  • Geovision GV-UBL1301-0F - page 269

    Fixed IP Dome 16 16.5 Connecting t he Camera Figure 16-20 1. Use a standard network cable t o connect t he camera to your net work. 2. Optionally connect a speak er and an external microphone. 3. Optionally connect a monitor using a Video Out wire. Enable this function by select ing your si gnal format at the TV Ou t field on the Web interf ace. Se ...

  • Geovision GV-UBL1301-0F - page 270

    16.6 I/O Termin al Block The terminal block, locat ed on the back panel of the Fixed IP Dome, provides the i nterface to one input and one output devices. The I/O terminal bl ock can be used for app lications s uch as motion detection, event alerts vi a E-Mail and FTP, and center monitoring t hrough Center V2 and VSM. 16.6.1 Pin A ssign ment The Fi ...

  • Geovision GV-UBL1301-0F - page 271

    Fixed IP Dome 237 16 16.6.2 Voltage Load Expansion (Optiona l) The camera on its own can only drive a maximum load of 200mA 5V DC . To expand the maximum voltage load to 10A 250V AC / 10A 125V AC / 5A 100V DC ), connect the cam era to a GV -Relay V2 module (optional product). Refer t o the figure and table below: Connect to Power 3 Outpu t D evice ...

  • Geovision GV-UBL1301-0F - page 272

    Chapter 17 Cub e Camera The Cube Camera is a light weighted wired / wireless network camera designed for indoor usage. Its simple des ign allows for fast and easy installation and fixed-spot surveillance once installed. Four models are available: Model No. S pecification Description GV-CB120 1.3 MP, H.264, Cube Camera GV-CB220 2 MP, H.264, Cube Cam ...

  • Geovision GV-UBL1301-0F - page 273

    Cube Camera 239 17 17.1 Pack ing List  Cube C amera  Supporti ng R a ck  Scr ew x 3  Scr ew Anchor x 3  GV-IPCA M H.264 Q uick Start Gu ide  P owe r Ad apter  GV-IPCA M H.264 S o f t ware CD  GV-NVR Qu ick St art Guid e  GV-NVR S oftwar e DVD Note: The power adapt e r c an b e excluded up on requ e st. ...

  • Geovision GV-UBL1301-0F - page 274

    17.2 Featur es • 1/2.5’’ progress ive scan CMOS • Dual streams from H.264 or MJPEG • Frame rate Camera Model Frame Rate GV-CB120 / CBW120 Series 30 fps at 1280 x 1024 GV-CB220 / CBW220 Series 30 fps at 1920 x 1080 • Day and night function (electroni c) • Wide Dynamic Range (WDR) • Defog • Wireless connectivity: WiFi 802.11b/g/n (f ...

  • Geovision GV-UBL1301-0F - page 275

    Cube Camera 17 17.3 Ov ervie w 1 2 3 4 5 6 7 8 9 10 Figure 17-1 No. Name Description 1 Microphone Receives sounds. 2 Speaker P lays sounds. 3 LAN Connect s to a 10/100 Ethernet. 4 Status LED Turns red when the system powers on. Turns orange when the system is ready. 5 LAN LED Turns green when the camera is connected to the Internet through wires. T ...

  • Geovision GV-UBL1301-0F - page 276

    17.4 Insta llation Follow the steps below to instal l, connect to and adjust your Cube Camera and Wireless Cube Cam era. 1. Put the supporti ng rack on t he desired location and make marks for screw anchors. Figure 17-2 2. Drill the mark s and inser t the scre w ancho rs. 3. Sec ure the supporti ng rack ont o the wall usi ng the supplied s crews. 4 ...

  • Geovision GV-UBL1301-0F - page 277

    Cube Camera 17 5. Connect the network and power cables to the camera. See 17.5 Connecting t he Camera . 6. Access t he live view. See 19.1 Accessing the Live View . 7. Adjust the angle of the camera based on live view and fasten t he indicat ed screw. Figure 17-4 8. For GV -CBW120/220, to c onnect to the I nternet t hrough wireless servic e, follow ...

  • Geovision GV-UBL1301-0F - page 278

    244 17.5 Connecting t he Camera 1 2 Figure 17-5 1. Use a standard network cable t o connect t he camera to your net work. 2. Power on using the power adapter. The power adapter is an optional device. For detail, s ee Options in the manual . 3. The status LED of the camera w ill be orange. IMPO RTANT: B e sure to use the GeoVision power adapter to p ...

  • Geovision GV-UBL1301-0F - page 279

    Chapter 18 Advanced Cube Camera The Advanced Cube Camera integrates the passive infrared (PIR) sensor and the alarm LED to illu minate the scene automatically w hen the motion is detect ed. It also off ers wireless connection t o the network f or fl exible installat ion. It is small, light, and easy-to-use for indoor sec urity. We provide four m od ...

  • Geovision GV-UBL1301-0F - page 280

    18.1 Packing L ist • Advanced Cube Camera • Supporting Rack • Scre w x 3 • Screw Anchor x 3 • GV-IPCAM H.264 Quick Start Guide • GV-IPCAM H.264 Software CD • GV-NVR Quick Start Guide • GV-NVR So f twa re D VD Note: Power adapter can be purchased upon request. 246 ...

  • Geovision GV-UBL1301-0F - page 281

    Advanced Cube Camera 18 18.2 Featur es • 1/2.5’’ progress ive scan CMOS • Dual streams from H.264 or MJPEG • Frame rate Camera Model Frame Rate GV-CA120 / CAW120 30 f ps at 1280 x 1024 GV-CA220 / CAW220 30 fps at 1920 x 1080 • Micro S D card slot (SD/SDHC) f or local storage • Passive infrared (PIR) sensor f or detecting movement and ...

  • Geovision GV-UBL1301-0F - page 282

    18.3 Ov ervie w 1 2 3 4 5 6 7 8 9 10 11 12 Figure 18-1 No. Name Description 1 Speaker Plays sounds f or tampering and motion alarm, and listens t o the audio around the camera. To s et up al arm sound, see 21. 3.9 Speaker. 2 PIR sensor Passive infrared sensor. 3 Microphone Receives sounds. 4 White Il lumination LED When the P IR sensor detects the ...

  • Geovision GV-UBL1301-0F - page 283

    Advanced Cube Camera 18 No. Name Description 10 Ready LED Reflects system status of the c amera. See the below table. 11 LAN LED Reflects LAN stat us of the camera. See the below table. 12 Mem ory Card Slot Insert s a micr o SD ca rd (SD /SDH C, version 2.0 onl y, Class 10) to store recording data. IMPO RTANT: The Whit e Illumination LED can reach ...

  • Geovision GV-UBL1301-0F - page 284

    18.4 Insta llation Follow the steps below to instal l, connect to and adjust your Advanced Cube Camera and Wireless A dvanced Cube Camera. 1. Put the supporti ng rack on t he desired location and make marks for screw anchors. Figure 18-2 2. Drill the mark s and inser t the scre w ancho rs. 3. Sec ure the supporti ng rack ont o the wall usi ng the s ...

  • Geovision GV-UBL1301-0F - page 285

    Advanced Cube Camera 18 5. Connect the network and power cables to the camera. See 18.5 Connecting t he Camera. 6. Access t he live view. See 19.1 Accessing the Live View . 7. Adjust the angle of the camera based on live view and fasten t he indicat ed screw. Figure 18-4 8. For GV -CAW120/220, to c onnect to the I nternet t hrough wireless servic e ...

  • Geovision GV-UBL1301-0F - page 286

    252 18.5 Connecting t he Camera 1 2 Figure 18-5 1. Use a standard network cable t o connect t he camera to your net work. 2. Connect power using one of the following methods : • plugging the power adapter to the power port. The power adapter is an optional device. For detail, see Options in the manual. • using the Power over Ethernet (P oE) fun ...

  • Geovision GV-UBL1301-0F - page 287

    Chapter 19 Ge tting S tarted This section provides the initi al and basic configurations of the GV-IPCAM H.264. 19.1 A ccessing the L iv e View Access or configure your c amera according t o the camera t ype and its firmware version: Camera Ty pe & Firmware Version Default Connect ion Ty pe • GV-I PCAM H.264 with firmwar e V1.0 7 or late r (e ...

  • Geovision GV-UBL1301-0F - page 288

    Camera Ty pe & Firmware Version Default Connect ion Ty pe • GV-I PCAM H.264 with firmware V1.06 or earlier • GV-PTZ010D Static The default IP address 192.168. 0.10 w ill be automatically ass igned when the camera is connected t o the net work. To avoid IP conflict with other GeoVision IP devices, it is advisable to re-assign a different IP ...

  • Geovision GV-UBL1301-0F - page 289

    Getti ng Star ted 19 19.1.1 Che cking the Dynamic I P Address Follow the steps below to look up the IP address and access the Web interface . 1. Install the GV-IP Device Utilit y program included on the GV-IPCAM H.264 Software CD . Note: The PC installed with GV-IP Devic e Utility must be under the same LAN with the GV-IPCAM H.264 you wish to confi ...

  • Geovision GV-UBL1301-0F - page 290

    3. Find the camera with its Mac Address, click on its IP address and selec t We b Page . Figure 19-2 4. The login page appears. Figure 19-3 5. Type the default ID and password admin and click A pply to log in. 256 ...

  • Geovision GV-UBL1301-0F - page 291

    Getti ng Star ted 19 19.1.2 Conf iguring th e IP Addr ess Follow the steps below to configure the IP address. 1. Open your web browser, and type the default IP address http:// 192.168.0.10 . 2. In both Login and Password fields, type t he default value admin . Click Ap p l y . 3. In the left m enu, select Networ k and then LA N to begin the network ...

  • Geovision GV-UBL1301-0F - page 292

    IMPO RTANT: 1. If Dy namic IP Address or PP PoE is enabled, you need to know which IP address the camera w ill get from DHCP server or ISP to log in. If your camera is i nstalled in the LAN, use the GV-IP Device Utility to look up its current dyna mic IP address. See 19.1.1 Checking the Dynamic IP Address . If your camera uses a public dynamic IP a ...

  • Geovision GV-UBL1301-0F - page 293

    Getti ng Star ted 19 19.1.3 Configuring the Wireless Connection You may c reate wireless connection t o the I nternet for: • B ox Camera: GV-BX1200 series / 1300 series / 1500 series / 2400 series / 2500 series / 3400 series / 5300 series • Wirele ss Cube Camera: GV-CBW120 / 220 • Wirele ss Advanced Cube Camera: GV-CAW 120/220 • M ini Fixed ...

  • Geovision GV-UBL1301-0F - page 294

    B. Type t he Network Name (SSID) or click the A ccess Point Survey button to search and select for the available Acc ess Points/ wireless st ations. C. Sel ect Ad -H o c or In frastructure for the Network type. D. Select the A uthentication Ty pe using the drop-down list. You can also obtain this inf ormation by clicking the Access Point Survey but ...

  • Geovision GV-UBL1301-0F - page 295

    Getti ng Star ted 19 4. Enable wireless LAN. A. On the W eb interface, select Net work and LA N . This page appears. Figure 19-6 B. Selec t Wireless for Optional Network Type. C. To use a dyna mic IP address ass igned by the DHCP server, selec t Dy namic IP address . To u se a fixed IP address, select Static IP address and type the IP address infor ...

  • Geovision GV-UBL1301-0F - page 296

    5. Click A pply . The Camera will s tart creating a wireless connection to the access point. Note: For GV-CBW120/220 and GV-CAW120/220, the LAN LED (No. 5, Figure 17-1; No.11, Figure 18-1) turns blue when the connecti on is established. 6. Unplug the Ethernet cabl e. 262 ...

  • Geovision GV-UBL1301-0F - page 297

    Getti ng Star ted 19 19.2 A djusting Image C larity Note the procedures descri bed in this section only apply to Box Camera , IR A rctic Box C amera , Bu llet C ame ra , PT C amera , Vanda l Proof IP Dome , Mi ni Fixed Dome , Min i Fixed Rugged Dome , Target Mini Fixed Dome, Target Mini Fi xed Rugged Dome , and Fixed IP Dome . To adjust focu s of a ...

  • Geovision GV-UBL1301-0F - page 298

    3. Select Focus Value. The Login dialog box appears. Figure 19-8 4. Type the user name and password of the camera selected. The default is admin for both user name and password. This window appears. Figure 19-9 5. For GV-V D120D / 121D / 220D / 2 21D / 320D / 321D / 1500 / 2400 / 2500 / 3400 / 1530 / 2430 / 2530 / 3430 , hold t he supplied Focus Ad ...

  • Geovision GV-UBL1301-0F - page 299

    Getti ng Star ted 19 6. For Mini Fixed Do me , Mini F ixed Rugged D ome , Targe t M ini Fix ed Dome and Target Min i Fixed Rugged Dome , hold the camera c over close to the lens for precis e focus adjustment. 7. Adjust the Focus Screw and the Zoom Screw of the camera slowly until the focus value reac hes the maximum. For example, the maximum focus ...

  • Geovision GV-UBL1301-0F - page 300

    19.2.1 Using Focus Adjustment Cap The Focus Adjustment Cap is only supplied for IK10+ models ( GV-VD120D / 121D / 220D / 221D / 320D / 321D / 1500 / 2400 / 2500 / 3400 / 15 30 / 2430 / 2530 / 3430) . Hold the Focus Adjustment Cap on top of the camera view and keep it close to the camera. Do not leave a distance between the Focus Adjustment Cap and ...

  • Geovision GV-UBL1301-0F - page 301

    Getti ng Star ted 19 19.2.2 Loc ations o f Adjustment Sc rews Models Ad j u s t m e n t S c r ew s Box Camera Zoom Scr ew Focus Screw Bullet C amera Zoom Scr ew Focus Sc rew Vandal Proof IP Dome Focus Screw Zoom S crew Fixed IP Dome Focus Scr ew Zoom S crew 267 ...

  • Geovision GV-UBL1301-0F - page 302

    Models Ad j u s t m e n t S c r ew s Mini Fixed Dome Lens Sc rew Focus Ring Mini Fixed Rugged Dome Lens Screw Focus Ring Note: 1. The adjustment screws of Box Camera may vary f or different models. 2. To focus GV-MFD and GV-MDR, loosen the lens screw first and slowly adjus t the foc us ring. Some m odels may need a T6 screw driver to loosen the cam ...

  • Geovision GV-UBL1301-0F - page 303

    Getti ng Star ted 269 19 19.3 Configuring the Basic s Once the c amera is properly installed, the f ollowing important features can be configured using the browser-based conf iguration page and are discussed i n the following sections in this manual: • Date and time adjust ment: see 21 .8.1 Da te & Time Setting s . • Login an d privileged p ...

  • Geovision GV-UBL1301-0F - page 304

    Chapter 20 Accessing the Camera Two types of users are allowed to log on to the GV-IPCAM H.264: Ad m i n i s t r a t o r and Guest . The Administ rator has full access to all system configurat ions, while the Guest can only access the live view (except the Camera A djustment sett ings) and network status. ...

  • Geovision GV-UBL1301-0F - page 305

    Accessing the Ca mera 20 20.1 A ccessing Your Surv eillance Image s Once installed, your GV-IPCAM H.264 is accessible on a network. Follow these st eps to access your s urveillance im ages: 1. Start your web browser. 2. Enter the IP address or the domain name of the camera in the Location/Address field of your browser. Figure 20-1 3. Enter the logi ...

  • Geovision GV-UBL1301-0F - page 306

    20.2 Functions Featu red on the Main Page This section introduces t he features of the Live View window and Network Status on the main page. The two features are accessible by both Administ rator and Guest. Main Page of Guest Mode ▼ Video and Motion ► Live View ► Camera ▼ Network ► Statu s Figure 20-2 The GV-IPCAM H.264 can process one vi ...

  • Geovision GV-UBL1301-0F - page 307

    Accessing the Ca mera 20 20.2.1 The Live View Window Internet Explor er When accessing the li ve view using Internet Explorer, the foll owing window appears. 10 9 8 1 2 3 4 5 6 7 Figure 20-3A 273 ...

  • Geovision GV-UBL1301-0F - page 308

    11 12 Figure 20-3B 274 ...

  • Geovision GV-UBL1301-0F - page 309

    Accessing the Ca mera 20 No. Name Functi on 1 Pl ay Plays live video. 2 St op St ops playing video. 3 Microphone Broadcasts to the surveillance site from a remote PC. No te th is fun ction is no t av ailab le for Ult ra Bulle t Camera and Target Series . For Cube Camera and A dvanced Cube Camera , you can click the Push to talk button (from the pop ...

  • Geovision GV-UBL1301-0F - page 310

    No. Name Functi on 8 Show System Menu Brings up these funct ions: Alarm Noti fy, Vi deo and Audio Configurati on, Remote Config, Show Camera Name and Image E nhance. --- See 20.2.6 Alarm Notif ication , 20.2.7 Vi deo and Audio Configuration , 20.2.8 Remote Conf iguration, 20.2.9 Camera Name Displa y, and 20.2.11. Image Enhancement. 9 PTZ Control Pa ...

  • Geovision GV-UBL1301-0F - page 311

    Accessing the Ca mera 20 Non-IE Browsers When accessing the li ve view using Google Chrome, Firefox or Safari, this window appears. Note the foll owing functions are not supported on non-IE browsers: Motion Detect ion, Tampering Alarm, Visual Automation, Tex t Overlay and Two-Way Audio. Figure 20-4 277 ...

  • Geovision GV-UBL1301-0F - page 312

    20.2.2 T he Contro l Panel o f the Liv e View Window To open the control panel of the Live View window, click the arrow button on top of the window. You can access the following funct ions by using the right and left arrow buttons on the control panel. Clic k the ar ro w butt on to displ ay the cont rol panel . Clic k the r ight and left arro w but ...

  • Geovision GV-UBL1301-0F - page 313

    Accessing the Ca mera 20 [Information] Displays the version of the camera, t ime of the local computer, time of the camera (host time), the number of users loggi ng in the camera and the OCX registration path. [Video] Dis plays the current video codec, resolution and dat a rate. [Audio] Displays the audio data rates when the microphone and s peaker ...

  • Geovision GV-UBL1301-0F - page 314

     Image O rien tatio n: Changes the image orient ation on the Live View win do w.  Slowest Sh utter Spe ed : Shutter speed controls t he a mount of the lights ent ers the image sensor and directly impacts the quality of image presentati on. A slow shutter speed allows higher light exposure that creates a bright er overall image by blurring mov ...

  • Geovision GV-UBL1301-0F - page 315

    Accessing the Ca mera 20  Zoom: Cli ck the Zoom In and Zo om Out buttons to adjust the apparent dist ance of the scene. Aft er zooming t he camera, re-f ocus the camera manually or automatical ly. For details, see Focus Change and Focus Mode below.  Focus Change: Click the Focus In and Focus Out buttons to adjust the focus. To focus autom ati ...

  • Geovision GV-UBL1301-0F - page 316

    Figure 20-6B Figure 20-6A Figure 20-6C 282 ...

  • Geovision GV-UBL1301-0F - page 317

    Accessing the Ca mera 20 Note: 1. GV -PTZ010D only contains the G amma feature. 2. Saturation is not available for GV -PTZ010D. 3. Slowest Shutter Speed and Defog is not available for GV - BX140DW . 4. D/N , Slowest Shutter Speed and Defog are not available for GV - PTZ010D. 5. D/N sensitivit y adjustment is not available f or GV -BX 140DW which au ...

  • Geovision GV-UBL1301-0F - page 318

    20.2.3 Snapshot of Live Video To take a snapshot of live video, follow these steps: 1. Click the Snapshot button (No. 5 , Figure 20-3). The Save As dialog box appears. 2. Spec ify Save in , type the File na me , and select JPEG or BM P as Save as Ty pe . Y ou may also choose whether to display the name and date stamps on the image. 3. Click the Sav ...

  • Geovision GV-UBL1301-0F - page 319

    Accessing the Ca mera 20 20.2.5 Picture- in-Pictur e and Pictu re-and-Pi cture Vi ew The full s creen mode provides two t ypes of cl ose-up views: P icture-in- Picture (PIP) and Picture-and Picture (PAP) . The two views are useful to provide clear and detailed images of the surveillance area. Picture- in-Pictur e View With the Picture in Pict ure ( ...

  • Geovision GV-UBL1301-0F - page 320

    Picture- and-Pictu re View With the Picture and Picture (PA P) view, you can create a split video effect with multip le close-up views on the image. A total of 7 close-up views can be defined. Figure 20-8 1. Right-click t he live view and select PA P . A row of three inset windows appears at the bottom. 2. Draw a navigation box on the image, and th ...

  • Geovision GV-UBL1301-0F - page 321

    Accessing the Ca mera 20 6. To delete a navigation box, right-click the desi red box , select Focus Ar e a of PAP Mode and click Delete . 7. To ex it the PAP vi ew, right-click the image and click PA P again. 287 ...

  • Geovision GV-UBL1301-0F - page 322

    20.2.6 Alarm Notificatio n After input triggers and m otion detection, you can be alerted by a pop-up live video and view up to four captured images. Pop-up live video Captured images video Figure 20-9 To con figur e this fun ction, click the Show S ystem Me nu button (No. 8, Figure 20-3), and select Al a rm No t i f y . This dialog box appears. Fi ...

  • Geovision GV-UBL1301-0F - page 323

    Accessing the Ca mera 20  I/O A lar m No tify : Once the input device is triggered, the captured images are displayed on t he control panel of the Live View window. For this f unction to work, the A dministrat or needs to inst all the input device properly. S ee 21.2.1 Input Setting .  Alert Sound: Act ivates the c omputer alarm on motion and ...

  • Geovision GV-UBL1301-0F - page 324

    20.2.7 Video a nd A udio Configuration You can enable the mic rophone and s peaker for two-way audio communication and adj ust the audio volume. To change audio configurat ion, click the Show System Menu button (No. 8, Figure 20-3), and select Video and A udio Conf iguration .  Cam era: Sets the number of frames to keep in live view buffer. Keep ...

  • Geovision GV-UBL1301-0F - page 325

    Accessing the Ca mera 20  Audio Configure: You can enable t he microphone and speaker, and adjust the audio volume Figure 20-12 291 ...

  • Geovision GV-UBL1301-0F - page 326

    20.2.8 Remote Configuration You can upgrade firmware over the network. Cl ick the Show S y ste m Me nu button (No. 8, Figure 20-3), and select Remote Config . The R emote Config dialog box will appear. [Firmware Upgrade] In this tab, you can upgrade the firmware over the Internet. For details, see Advanced Applic ations, Chapter 22. 20.2.9 Camer a ...

  • Geovision GV-UBL1301-0F - page 327

    Accessing the Ca mera 20 20.2.11 Visual PT Z Note this feature is only avail able in PTZ Ca mera and PT Ca mera . The Visual PTZ provides two types of PTZ control panels on live images for easy and direct PTZ operati on. Activating Visual PTZ Click the PTZ C ontrol button (No. 9, Figure 20-3) and select Visu al PTZ . Alternati vely right-click anyw ...

  • Geovision GV-UBL1301-0F - page 328

    Figure 20-15 The Visual P TZ Panel provides the following f eatures: No. Name Description 1 Zoom I n Shortens the apparent distance between the camera and the view . 2 Zoo m O u t Lengthens the apparent distance between the camera and the view . 3 Focus I n 4 Focus Out Adjusts the sharpness of the camera view . 5 Home Bri ngs the c amera to the hom ...

  • Geovision GV-UBL1301-0F - page 329

    Accessing the Ca mera 20 Setting Visual PTZ Panel Click the .button on the top left corner and select Visual PTZ, the following options will appear.  PTZ Control Ty pe: Two types of visual PTZ control panels are available.  Ty pe 1: Appears only when a movement of the curs or is detected and dis appears when it is stati c. W hen you place the ...

  • Geovision GV-UBL1301-0F - page 330

    20.2.12 Dig ital PT Z Note this functi on is only supported by firmware V2. 06 . This function allows non-PTZ cameras to simulate PTZ movements on live view. 1. Right-cl ick the live view and select Digital P TZ . The live view is labeled with “DPTZ” at the top left corner. Figure 20-16 2. To zoom in / out, move the cursor to the live view and ...

  • Geovision GV-UBL1301-0F - page 331

    Accessing the Ca mera 20 3. To pan and tilt the view, zoom the image first and then click and hold the arrow on the image. The arrow appears when you place the cursor in one of the eight directions, i. e. up, down, left, right, left up, left down, right up and right down. Figure 20-18 4. To adj ust the trans parency level of the c ontrol panel, cli ...

  • Geovision GV-UBL1301-0F - page 332

    20.2.13 I/O Control Note this functi on is only supported by cameras with I/O funct ion. The I/O Control window provides a real-tim e graphic display of camera status, I/ O status, and alarm events. Additionally, you ca n re mot ely force output to be triggered. Figure 20-19 • To display the I/O control window, click the I/O Contro l button (No. ...

  • Geovision GV-UBL1301-0F - page 333

    Accessing the Ca mera 20 20.2.14 Visu al Automatio n Note this functi on is only supported by cameras with I/O funct ion. The Visual Automation all ows you to c hange the c urrent state of the electronic devi ce by simply clicking on its image, e.g. turning t he light ON. This feature is only availabl e when the Visual Automation is set ahead by th ...

  • Geovision GV-UBL1301-0F - page 334

    300 20.2.15 Net wo rk Status To view the network status, in the left menu, click Network and select Status . Figure 20-21 ...

  • Geovision GV-UBL1301-0F - page 335

    Chapter 21 A dminis trator Mode The Administ rator can access the s ystem confi guration through t he network. Eight cat egories of configurations are involved in t he system configurat ion: Video and Motion , I/O Cont rol or Digi t al I /O a nd PTZ , Events and A lerts , Monitoring , Recording Schedule , Remote ViewLog , Network and Management . F ...

  • Geovision GV-UBL1301-0F - page 336

    List of Menu Opt ions Find the topic of interest by referring to the secti on number prefixed to each option. The available options vary am ong camera models. 21.1 Video and Motion 21.1.1 Video Settings 21.1.1 Motion Det ection 21.1.3 Privacy Mask 21.1.4 T e xt Overlay 21.1.5 T ampering Alarm 21.1.6 Visual Automation 21.2 Digital I/O and PTZ 21.2.1 ...

  • Geovision GV-UBL1301-0F - page 337

    Administrator Mode 21 21.8 Management 21.8.1 Date and Ti me Sett ings 21.8.2 S torage Settings 21.8.3 User Account 21.8.4 Log Informati on 21.8.5 T ools 21.8.6 Language 303 ...

  • Geovision GV-UBL1301-0F - page 338

    21.1 Video and Motio n The GV-IPCAM H.264 can simultaneously process one video sourc e in two different c odec and resolutions. The dual-stream design benefits f or low er bandwidth environment , allowing Streaming 2 to be set with lower resoluti on and codec for live streaming, and Streaming 1 set with highest resoluti on and codec H.264 for best ...

  • Geovision GV-UBL1301-0F - page 339

    Administrator Mode 21 21.1.1 Video Setti ngs Figure 21-2A 305 ...

  • Geovision GV-UBL1301-0F - page 340

    Figure 21-2B 306 ...

  • Geovision GV-UBL1301-0F - page 341

    Administrator Mode 21 [Name] Rename the video stream. To display t he name of video stream on the Live View window, see 20.2.9 Camera Name Di splay . [Connection Template] Select the type of your network connect ion. Unle ss y ou sel ect Customized , this op tion w ill auto matically bring up the recommended vi deo resolution, frame rate, bandwidth ...

  • Geovision GV-UBL1301-0F - page 342

    Camera T y pe Defaul t Max. Bitrate for VBR St r e am 1 6 M b i t 1.3 MP St r e am 2 4 M b i t St r e am 1 8 M b i t 2 MP St r e am 2 4 M b i t S tream 1 12 Mbit 3 MP St r e am 2 4 M b i t 4 MP Stream 1 16 Mbit S tream 1 20 Mbit 5 MP St r e am 2 4 M b i t  CBR (Co nstant Bitr ate): CBR is used to achieve a specific bitrate by varying the qualit ...

  • Geovision GV-UBL1301-0F - page 343

    Administrator Mode 21 Select Enable and click ROI Setting to conf igure: 1. On the popup window, use your mouse and draw directly on the live view to specify a regi on. Figure 21-3 2. To set up a region with enhanced clarity, select ROI , sel ect High , Me diu m or Low u sing the drop-down list and then drag on the image to outline a region. 3. To ...

  • Geovision GV-UBL1301-0F - page 344

    [Vide o S lice Mode ] Note this f unction is only s upported by f irmware V2. 12 or earlier and is not support ed for Target Series . Corrects the display mode of the camera when it is displayed on a third-part y NVR/DVR software and the live view is incom plete or broken. Select Sing le Slic e or Multi S lice to display the live view. The default ...

  • Geovision GV-UBL1301-0F - page 345

    Administrator Mode 21 [Text Overlay Settings]  Overl aid with camera name: Includes streaming names on live and recorded videos.  Overlaid wit h da te s ta mps : Includes date stamps on live and recorded videos.  Overlaid with ti me st amps : Incl udes time stamps on live and recorded videos.  Overl aid with digital input descr iption: ...

  • Geovision GV-UBL1301-0F - page 346

    [TV Out] Note this function is only available f or Box Camera , IR A r ctic Box Camera , Vandal Pr oof IP Dome and Fixed IP Dome . Select the signal f ormat of t he Video Output on the camera as either NTSC or PAL. Note: For smooth disp lay of Box Camera , IR A rct ic Box Camer a , Fixed IP Dome and V a ndal Proof IP D ome on TV monitor , the video ...

  • Geovision GV-UBL1301-0F - page 347

    Administrator Mode 21 [Special View Setting]  D/ N: S ets the sensi tivity of day-night m ode switch. The higher t he sensitivi ty value, t he more s ensitive the s witch is from day m ode to night mode. The default value is 5.  Au t o : Select Au t o for the camera to detect the amount of light present and automatic ally switch to monochrome ...

  • Geovision GV-UBL1301-0F - page 348

     Iris Ty pe: Note this function is not supported for GV-IP Cameras with fixed lens or fixed iris. This field shows the iris type (DC-I ris or P-Iris) of your GV-IP Camera.  A uto Iris: The option is designed for auto iris lens (DC-Iris or P- Iris). E nable the auto iris function when the scene appears fuzzy and the Flicker Less function does ...

  • Geovision GV-UBL1301-0F - page 349

    Administrator Mode 21 21.1.2 M otio n Detection Note for firmware V1.07 or later and the Target Series (except GV- PTZ010D), motion detection is disabled by default; for GV-PTZ010D, motion detecti on is enabled by default. Motion detecti on is used to generate an alarm whenever movement occurs in the video image. You can configure up to 8 areas wit ...

  • Geovision GV-UBL1301-0F - page 350

    1. Select the desired s ensitivity by moving the slider. There are te n values. The higher the value, the m ore sensitive the camera is to motion. 2. Drag an area on the image. Click Ad d when you are prom pted to confirm the setti ng. 3. To create several areas with diff erent sensitivity values, repeat steps 1 and 2. 4. Click Save to save the abo ...

  • Geovision GV-UBL1301-0F - page 351

    Administrator Mode 21 21.1.3 Priv acy M ask The Privacy Mask functi on is used to block out sensitive areas on live view and recorded clips f or cameras c onnecting to GeoVision software. Thi s feature is ideal for loc ations with displays, keyboard sequenc es (e.g. passwords), and for anywhere else you don’t want sensitive information visibl e. ...

  • Geovision GV-UBL1301-0F - page 352

    21.1.4 T ext Ov erlay The Text Overlay allows you to overlay any text in any place on the camera view. Up to 16 text messages ca n be created on one camera view. The over laid tex t will b e saved in the r ecor dings. Figure 21-6 1. Select the f ont, font style and font size in a pop-up window. 2. Select the Enabl e option. 3. Click any place on th ...

  • Geovision GV-UBL1301-0F - page 353

    Administrator Mode 21 6. Click Set Fo nt to modify the font settin gs. 7. Click Save to apply the sett ings, or click Loa d (Undo) to revert to the last save d se tting . 8. Click Preview to see how the text will appear on the i mage. Click Close t o end the preview. 319 ...

  • Geovision GV-UBL1301-0F - page 354

    21.1.5 T ampering Alarm Note t his function i s not available for PTZ Ca mera and PT Came ra . Tampering Alarm is used to detect whether a camera is being physically tampered. An alarm can be generated when the camera is moved, covered up, or out of focus. The alarm types include triggered the output device, e- mail alert and notifyi ng the connect ...

  • Geovision GV-UBL1301-0F - page 355

    Administrator Mode 21 Figure 21-8 To configure the tampering alarm: 1. Sele ct the Enable option. 2. If you want t he camera to ignore any m ovement or scene change in certain areas, c lick the button to drag areas on the camera view. 3. Sele ct the desi red detect ion sensitivit y by m oving the sl ider. The higher the value, t he more sens itive ...

  • Geovision GV-UBL1301-0F - page 356

    6. To trigger an alarm when the scene turns dark, e.g. the lens of camera has been covered, select A larm for Dark Images . F or Target Series, this function is automaticall y selected when Tampering Alarm is enabled. 7. Click A pply to save all th e se tting s. 8. Start monitoring t o enable the function. To have output alarm, it is required to st ...

  • Geovision GV-UBL1301-0F - page 357

    Administrator Mode 21 21.1.6 Visu al Automation Note this functi on is only supported by cameras with I/O funct ion. This intuitive f eature helps you automate any electronic device by triggering t he connected output device. When you click on t he image of the electronic devi ce, you can simply change its current state, e. g. light ON. Figu re 21- ...

  • Geovision GV-UBL1301-0F - page 358

    3. Ass ign the connect ed module and out put devi ce. In the Note fiel d, type a note to help you manage the device. Click OK to sav e the settings. 4. To c hange the frame c olor of t he set area, c lick the Set Col or button. 5. To emboss the set area, select Floa t Up ; or k eep it flat by selecting Normal . 6. Click the Save Set button to apply ...

  • Geovision GV-UBL1301-0F - page 359

    Administrator Mode 21 21.2 I/O Set tings Note the I/O settings are only available f or Box Camera , Bu llet C am era , Ultra Bull et Camera , PT Z Camer a , PT Ca mera , Vanda l Proof I P Dome and Fixed IP Dome . After installing the I/O device, you need to enable the I/O settings on the camera. For how to i nstall the I/ O device on the c amera, s ...

  • Geovision GV-UBL1301-0F - page 360

    21.2.1 Input Settings To activat e the sens or input, sel ect En abl e . Figure 21-11  Norm al State: You can set the input s tate to t rigger act ions by selecting Ope n C ircuit (N /O) or Grounded Circu it (N/C) .  Latch M ode: Enable this option to have a momentary output alarm.  Trigger digital output relay : When this option is enable ...

  • Geovision GV-UBL1301-0F - page 361

    Administrator Mode 21  PTZ Settings: Note this function is only avai lable for PTZ Ca mera and PT Ca mera .  Input On: Select a preset point to w hich the c amera turns when an input is triggered.  Input Off: Select a preset point to which the camera returns when the input triggeri ng is off.  Duration to set preset after input off: Spe ...

  • Geovision GV-UBL1301-0F - page 362

    21.2.2 Out put Sett ings Select Enable to start the output device. Choose the output signal that mostly suits the device you are using: N/O (Open Circuit), N/C (Grounded Circuit ), N/O Toggle, N/C Toggle, N/O Pulse or N/C Pulse. For Togg le output type, the output conti nues to be triggered until a new input trigger ends the output. For Puls e outp ...

  • Geovision GV-UBL1301-0F - page 363

    Administrator Mode 21 21.2.3 PTZ Set tings Note this functi on is only available in PTZ Ca mera and PT Camera . You can change the im age settings, c onfigure s equences, and acc ess settings incl uding autopan speed, motor reset, digit al zoom and system default loading. For det ails, see Acc essing the V ISCA OSD Confi guration in 12.8.3 PTZ Came ...

  • Geovision GV-UBL1301-0F - page 364

    21.3 Ev ents and Alert s For the events of motion detection or I/O trigger, the Admi nistrator can set up two trigger actions: 1. Send a captured still image by E-mail or FTP. 2. Notify Center Monitoring Station, Center V2 or VSM, by video or text alerts. To have the above trigger actions, you must set the following functions in advance: • M otio ...

  • Geovision GV-UBL1301-0F - page 365

    Administrator Mode 21 21.3.1 E- mail After a trigger event, the camera can send the e-mail to a remote user containi ng a captured st ill image. Figure 21-14 [Enable] Select to enable the e-mail function.  S ever URL/IP Address: Type the URL address or IP address of the SMTP Ser ver.  S erver Port: Modify the port number of the SMTP Server. O ...

  • Geovision GV-UBL1301-0F - page 366

     Alerts I nterval Time: Specify the interval bet ween e-mail alerts. The interval is bet ween 0 and 60 minutes. The option is useful for the frequent event occ urrence, by which any event triggers duri ng the interval period will be ignored. [Need authentication to login] If the SMTP Server needs authentication, enable this opti on and type a va ...

  • Geovision GV-UBL1301-0F - page 367

    Administrator Mode 21 21.3.2 FT P You can also send the captured still im age to a re mote FTP server f or alerts. Figure 21-15 [Upload to an FT P Server]  Enable: Select to enable the FT P function.  S erver URL/IP Address: Type the URL address or IP address of the FTP Server.  S erver Port: Type the port number of the FTP Server. Or k ee ...

  • Geovision GV-UBL1301-0F - page 368

     User Nam e: Type a valid username to log into the FTP Server.  P assword: Type a valid password to log into the FTP Server.  Rem ote Directo ry: Type the name of the storage f older on t he FTP Serve r.  Alerts I nterval time in minute: Specify the interval between FTP alerts. The interval can be between 0 and 60 minutes. The option is ...

  • Geovision GV-UBL1301-0F - page 369

    Administrator Mode 21 To access the internal FTP server through a web browser, enter the IP address or the domain name of the camera in your browser like this: ftp:// 192.168.0.10 When you are prompted for Usernam e and Password, enter the default value username ftpuser and password 123456 . Then you should find the AVI files rec orded after trigge ...

  • Geovision GV-UBL1301-0F - page 370

    21.3.3 C enter V2 After a motion or an I/O triggered event, the central m onitoring station Center V2 can be notified by live videos and text alerts. For the live monitoring through Cent er V2, you must already have a subscriber account on Center V2. A cam era can connect to up to 2 Center V2 s tations simultaneous ly. IMPO RT A NT : T o no tify Ce ...

  • Geovision GV-UBL1301-0F - page 371

    Administrator Mode 21 To enable the Center V2 connection: 1. A ctivate Li nk: Enable t he monitoring through Center V 2. 2. Host Name or IP Address: Type the host name or IP address of Center V2. 3. Port Nu mber : match the port to the P ort 2 value on Center V2 or keep the default value 5551 . 4. User Name: type a valid username to log into Center ...

  • Geovision GV-UBL1301-0F - page 372

    21.3.4 VSM After a motion or an I/O triggered event, the central m onitoring station VSM can get notified by text alerts. For the monit oring through VSM, you must already have a subscri ber account on VSM. A camera can connect up to 2 VSM sim ultaneously. IMPO RT A NT : T o no tify VSM server upon m otions, be sure to s et up detection areas on t ...

  • Geovision GV-UBL1301-0F - page 373

    Administrator Mode 21 To enable the VSM connection: 1. A ctivate Li nk: Enable the m onitoring through VSM. 2. Host Name or IP A ddress: Type the host name or IP address of VSM. 3. Port Number : Match the port to the Port 2 value on VSM. Or keep the default value 5609. 4. User Name: Type a valid username to log into VSM. 5. Password: Type a valid p ...

  • Geovision GV-UBL1301-0F - page 374

    21.3.5 B ackup Cen ter For the supported versi on of different models, see Appendix D . Note tha t Backup Center is not support ed for Target Series . The connection to the GV-Backup Center allows you to back up another copy of recordings and syst em log to the GV-Backup Center on an offsite locati on while the cam era is s aving these dat a to the ...

  • Geovision GV-UBL1301-0F - page 375

    Administrator Mode 21 To enable connection to GV-Backup Center: 1. A ctivate Li nk : Enable the connection to the GV-Backup Center. 2. Host Name or IP Address : Type the host name or IP address of the GV-Backup Center. 3. Port Nu mber : Match the comm unication port on the GV-Backup Center or keep the default value 30000 . 4. User Name : Type a val ...

  • Geovision GV-UBL1301-0F - page 376

    2. Host Name or IP A ddress : Type the host name or IP address of the failover GV-Back up Center. 3. Port Nu mber : Match the comm unication port on the fai lover GV- Backup Center or keep the default value 30000 . 4. User Name : Type a valid user name to log into the failover GV- Backup Cent er. 5. Password : Type a valid password to log into the ...

  • Geovision GV-UBL1301-0F - page 377

    Administrator Mode 21 21.3.6 Vid eo Gatew ay / R ecordin g Serv er For the supported versi on of different models, see Appendix D . The GV-Video Gateway / GV-Recording Server is a video st reaming server designed for large-scale video surveillance deployments. The GV-Video Gateway / GV-Recording Server (with rec ording capability) c an receive up t ...

  • Geovision GV-UBL1301-0F - page 378

    The support ed GV-IPCAM H.264 can c onnect up to t wo GV-Video Gateway / GV-Recording Server. To send the video images to the GV- Video Gateway or GV-Recordi ng Server, follow the steps below. 1. A ctivate Li nk : Enable the connection to the GV-Video Gateway / GV- Recording Server. 2. Host Name or IP Address : Type the host name or IP address of t ...

  • Geovision GV-UBL1301-0F - page 379

    Administrator Mode 21 21.3.7 Vie wLog Server Note that ViewLog Server is not supported for Target Series . The ViewLog Server is designed for rem ote playback function. This server allows you to remotely acc ess the recorded files saved at the GV-IPCAM H.264 and play back video with t he ViewLog player. This function is enabled by default using por ...

  • Geovision GV-UBL1301-0F - page 380

    21.3.8 RT SP The RTSP enables video and audio streaming to your 3G-enabled mobile phone. The RTSP streaming is enabled by default. Fig ure 2 1-21  Activate Link: Enable the RTSP service.  RTSP/TCP P ort: Keep the de fault value 8554, or modify it if necessary.  RTP /UDP Por t: Keep the default range from 17300 to 17319, or modify it if nec ...

  • Geovision GV-UBL1301-0F - page 381

    Administrator Mode 21 For details on remote monitori ng with mobile phones, see Mobile Phone Connection, Chapt er 26 . For RTSP comm and, see Appendix E . 347 ...

  • Geovision GV-UBL1301-0F - page 382

    21.3.9 Speaker Note this functi on is only available for Advanced Cube Camera . The Advanced Cube camera is equipped with an alarm. With the Speaker settings, your camera can sound the speaker (No. 1, Figure 18-1) when it is being tampered or when motions are detected. This function is disabled by default. Figure 21-22 1. Sele ct Enable . 2. Type t ...

  • Geovision GV-UBL1301-0F - page 383

    Administrator Mode 21 21.4 Monitoring Recording funct ion is not supported in Target Series . Re fer to 21.4.1 Monitoring S ettings f or Target Series for the corres ponding page. You can start monitoring m anually, by schedule or by input trigger. Note: See Note for Connecting to GV-System at the beginning of the manual. Figure 21-23 [Manual] Manu ...

  • Geovision GV-UBL1301-0F - page 384

     I nput: Note this function is only supported by cameras with I/O function. Manually starts I/O monitoring. When the sensor input is triggered, its associated camera and output will be activated for recording and alerti ng. For this setting, see 21.2.1 Input Setting. [Schedule] The system st arts m otion detection and I/O monitori ng according t ...

  • Geovision GV-UBL1301-0F - page 385

    Administrator Mode 21 21.5 Recording Sche dule Note t his function i s not available for Target Series . The schedule is provided to acti vate recording and I/O monitoring on a specific tim e each day. 21.5.1 R ecording Schedu le Settin gs You can set the sc hedule for recording. Figure 21-25  S pan 1- Span 3: Set a di fferent recordi ng mode fo ...

  • Geovision GV-UBL1301-0F - page 386

    21.5.2 I/O Monitoring Settings Note this functi on is only supported by cameras with I/O funct ion. You can set the sc hedule for I/O m onitoring to s tart. Figure 21-26  S pan 1- Span 3: Set different time frames during the day to enable I/O monitoring. Each day can be divided into 3 time frames, represented by Span 1 to Span 3.  W eekend: E ...

  • Geovision GV-UBL1301-0F - page 387

    Administrator Mode 21 21. 6 Remote View Log Note this functi on is not available for Target Series . With the Remote ViewLog player, you can pl ay back the files recorded at the GV-IPCAM H.264 over TCP/IP network. For the first-time user, you need to install the Remote ViewLog program fro m the Softw are CD . To allow remote a ccess to the ca mera, ...

  • Geovision GV-UBL1301-0F - page 388

    21.7 Net work The Network section includes some basic but important network configurat ions that enable the camera to be connected to a TCP/IP network. 21.7.1 L AN Configu ration According t o your network environment, select am ong Static IP, DHCP and PPPoE . Figure 21-27 354 ...

  • Geovision GV-UBL1301-0F - page 389

    Administrator Mode 21 [Optional Network Ty pe] Note the Wireless Settings are only available in GV-BX 1200 Series / 1300 Series / 1500 Series / 2400 Series / 2500 Series / 3400 Series / 5300 Series , GV-CBW120 / 220 , GV-CAW120 / 220 and GV-MFD1501 Series / 2401 Series / 2501 Series / 3401 Series / 5301 Series . Accordi ng to the network environm e ...

  • Geovision GV-UBL1301-0F - page 390

    21.7.2 Wir eless Clien t M ode Note this functi on is only supported in GV-BX1200 Seri es / 1300 S eries / 1500 Series / 2400 Series / 2500 Series / 3400 Series / 5300 , GV- CBW120 / 220 , GV-C A W120 / 220 and GV-MFD1501 Series / 2401 Series / 2501 Series / 3401 Series / 5301 Series and when GV- Wi Fi Adapter is install ed. Set up the client mode ...

  • Geovision GV-UBL1301-0F - page 391

    Administrator Mode 21  Netw ork name (SSID) : The SSID (Service Set Identify) is a unique name that identifi es a particular wireless network. Type SSID of the Wireless LAN group or Access Point you are going to connect to.  Access P oint Survey : Cli ck t his button t o search all the avai lable Access Poi nts (Infrastruct ure mode) and w ir ...

  • Geovision GV-UBL1301-0F - page 392

    358 21.7.3 A dvanced TCP/IP This secti on pr ovides th e advanced TCP/IP s ettin gs, inclu ding DDNS Server, HT T P port, HTT PS, str eaming p o r t, UPnP , QoS and net work connecti on ch e c k. Figure 21-2 9A ...

  • Geovision GV-UBL1301-0F - page 393

    Administrator Mode 359 2 1 Figure 21-2 9B [Dynamic DNS S erver S ettings] DD NS (D ynam ic D omain N ame Sy stem) provid e s a con venient wa y of acc e ss ing th e cam era when using a dynamic IP. DDNS assigns a domain nam e to th e cam e ra, s o th at the Ad minis trator does not need t o go thr ough the tr ouble o f c heckin g if th e IP addr es ...

  • Geovision GV-UBL1301-0F - page 394

    360 4. User N ame: T y pe the us e rn ame us ed t o enab le th e s er vice from th e DDNS. Th e us e rn ame sh ould l ook simil ar to you r host name. D e pendi ng on your s e rvic e pro vider, you should add d omain name (.dipm ap.com, .g vdip.c om or .org) aft e r y our us e r name, for exampl e, alice.dipm ap.com 5. Pass word: T ype the p a ss w ...

  • Geovision GV-UBL1301-0F - page 395

    Administrator Mode 21 [QoS Settings] The Quality of Service (QoS) is a bandwidth control mechanism that guarant ees delay-sensiti ve data flows such as voice and video streams , obtain a certain amount of bandwidth to keep the streaming smoot h. To apply QoS to GV-IPCAM H.264, all network routers must support QoS and QoS must be enabled on these de ...

  • Geovision GV-UBL1301-0F - page 396

    21.7.4 I P Filter Set tings The Administ rator can s et IP fi ltering to rest rict access to the c amera. Figure 21-30 To enable the IP Filter function: 1. Enable IP Filte ring : Enable the IP Filter function. 2. Filtered IP: Type one IP address or a range of IP addresses you want to restri ct the access. 3. Action to take: S elect the act ion of A ...

  • Geovision GV-UBL1301-0F - page 397

    Administrator Mode 21 21.7.5 SNM P Sett ings The Simple Network Management Protocol (SNMP) allows you to monitor the st atus of the c amera through SNMP network m anagement soft ware. Figure 21-31 363 ...

  • Geovision GV-UBL1301-0F - page 398

    1. Sele ct Enable SNMPv1 SNMPv2 c to enable the function. 2. To enable access to Read/Write community , type a community string. This will serve as a pa ssword to allow read and wr ite access to the camera from the SNMP software. 3. To enable Read only community , type a community string to allow read-only ac cess t o the camera f rom the SNMP soft ...

  • Geovision GV-UBL1301-0F - page 399

    Administrator Mode 21 21.8 Management The Management section includes the setti ngs of data and time and user account. Y ou can als o view the f irmware version and execute c ertain system operati ons. 21.8.1 D ate & Time S ettings The date and time settings are used for date and time stamps on the image. Figure 21-32 365 ...

  • Geovision GV-UBL1301-0F - page 400

    [Date & Time on GV-IP Camera] Displays the current date and time on the camera. [Time Zone] Sets the time zone for local sett ings. Select Enable Da y light Saving Time to automatically adjust the cam era for daylight saving tim e. Type the Start Time and End Time to enable the daylight saving function. To play back, see 22.2.4 Playback of Dayl ...

  • Geovision GV-UBL1301-0F - page 401

    Administrator Mode 21 21.8.2 Storage Set tings Based on Linux file system , the GV-IPCAM H.264 supports memory cards for video and audio recordings. You need to format the storage device by using the following Storage S ettings. After being formatted, t he storage device will be ready to use by Linux OS of the camera. Figure 21-33 Note: The T arget ...

  • Geovision GV-UBL1301-0F - page 402

    [Storage Settings]  Enable re cy clin g: If Ena ble recy cling is selected, when the space of the storage device is lower than the spe cified space, the system w ill overwrite the oldest recorded files. If Ena ble recy c ling i s not selected, the system will stop recording when the specified space is reached.  Keep da ys (1-255): Specify the ...

  • Geovision GV-UBL1301-0F - page 403

    Administrator Mode 21 [Partition Information] Note t his function i s not s upported for Target Series . Th is sec tion sho ws the partition det ails of the attached storage device. To add a storage device: 1. Ins ert the st orage devic e to the cam era. 2. Click the Format button. 3. After the for mat is complete , the par tition in forma tion w i ...

  • Geovision GV-UBL1301-0F - page 404

    Note: 1. If Enable Recy cle is selected, the available s pa ce of the storage device must be higher than the space you specified at the Stop recording or recy cle disk when free space of d isk is smaller than x option. Otherwise no video will be recoded. 2. The recording data may be lost if you remove the storage device during recording. 3. If you ...

  • Geovision GV-UBL1301-0F - page 405

    Administrator Mode 21 [Network Neighborhood Settings] Note t his function i s only available for Target Series using firmware versions 1. 02 or later. You can st ore recordings to a connect ed NAS server. Note: 1. For optimal performance and comp atibility , it is highly recommended to use a GV -NAS S ystem. 2. It is highly recommended that the NAS ...

  • Geovision GV-UBL1301-0F - page 406

    Note: Depending on the models of GV -NAS System, up to 16 default user accounts (username: Cam01 – Cam16 ; password: 12345678 ) are available. The storage limitation and recycle is applied on a user basis. It is recommended to use one user account exclusi vely for recording of one GV -IP Ca mera to avoid uneven data recycle. 3. Select a fol der t ...

  • Geovision GV-UBL1301-0F - page 407

    Administrator Mode 21 Ti p: Inst ead of searching for available NAS servers, you can also type the storage path directly . 1. T ype the Server URL/ IP Addre ss in this format: NA S IP A ddressStorage Folder . For exam ple, 192.168. 0.1IP_Camera . This GV - IP Came ra w ill be recor ded to a d efault shared folder named “I P_Camera” in the ...

  • Geovision GV-UBL1301-0F - page 408

    21.8.3 User Account You can change the login name and password of Administrator and Guest. The default Administrat or login name and password are admin ; the default Guest login name and password are guest . To allow a Guest user log in without entering nam e and password, select Disable authentication for guest account . To prevent automatic logou ...

  • Geovision GV-UBL1301-0F - page 409

    Administrator Mode 21 21.8.4 Log Information The log information contains dum p data that is used by service personnel for analyzing problem s. The logs available may vary depending on the camera model. Figure 21-40-1 375 ...

  • Geovision GV-UBL1301-0F - page 410

    Figure 21-40-2 376 ...

  • Geovision GV-UBL1301-0F - page 411

    Administrator Mode 21 21.8.5 Sy stem Log Note this functi on is only available for firm ware V2.12 or earlier and is not available for Target Series . For the supported versions, see Appendix F . The System Log records the events in the four types of logs: System Event , Monitoring Event , I/O Event and Login/Logout Event . W ith t he System Log, y ...

  • Geovision GV-UBL1301-0F - page 412

    4. Click Query . The filteri ng results may look like the figure below. Figure 21-42 378 ...

  • Geovision GV-UBL1301-0F - page 413

    Administrator Mode 21 21.8.6 T ools You can execute certain system operations and view the firmware version. Figure 21-43 379 ...

  • Geovision GV-UBL1301-0F - page 414

    [Host Settings] Enter a descriptive nam e for the camera. [Auto Re boot Setup] Sele ct Ena ble to activat e automatic reboot and specify t he time for reboot in the sub fields.  Da y Interval: Type the day interval bet ween each reboot.  Reboot Time: Use the drop-down lists to specify the time for automatic reboot. [Repair Record Database] No ...

  • Geovision GV-UBL1301-0F - page 415

    Administrator Mode 381 21 21.8.7 Langua ge Note t his function i s not available in GV -PTZ010D . You can select the language for the Web int erface. Figure 21-44 Use the Language drop-dow n list to select a language for the Web interface. By default, the language on the W eb interface will be the same with the one used for the operating syst em. ...

  • Geovision GV-UBL1301-0F - page 416

    Chapter 22 Recording and Playback Note that Recordi ng and Playback function is not available for Tar get Series . The GV-IPCAM H.264 can record video and audio directl y to the memory card. You can play back the recorded files on the GV-System or over the TCP/IP network. Note: See Note for Recording at the beginning of the manual. 22.1 Recording T ...

  • Geovision GV-UBL1301-0F - page 417

    Recording an d Playback 22 22.2 Play back These methods are availabl e to play back the video files recorded at the GV-IPCAM H.264: • Playback f rom the memory card by connecting it directl y to the GV- System through a card reader • Playback by using the Rem ote View Log funct ion over the TCP/IP network • Playback by using the rec orded fil ...

  • Geovision GV-UBL1301-0F - page 418

    1. Inst all the Ext2Fs d from the Software CD. Note: If you are us ing Windo ws 8 or Windows Server 2012 , change its compatibility be fore installing the Ext2Fsd program: A. Right-click t he Ext2Fsd program and select Properties . Th is dialog box appears. Figure 22-1 B. Selec t the Compatibili ty tab. C. Sel ect Win dow s 7 using the drop-down li ...

  • Geovision GV-UBL1301-0F - page 419

    Recording an d Playback 22 2. On Your desktop, click Start , sele ct Pro grams , locate the Ext2 Fsd folder and select Ext2 Volume Manager . All the connected drives are shown. Figure 22-2 385 ...

  • Geovision GV-UBL1301-0F - page 420

    3. For the first-inst allation, execute the Ext2Fsd Service. A. From the Ext2 Volume Manager window, select Tools and select Service Management . This dialog box appears. Figure 22-3 B. Click A pply . 386 ...

  • Geovision GV-UBL1301-0F - page 421

    Recording an d Playback 22 4. Mount the storage drive to your com puter. A. From the Ex t2Fsd Volume Manager window, right-click the storage drive and select Ext2 Management . Thi s dialog box appears. Figure 22-4 B. Under t he Mount point & driver letter section, select A utomatical ly mount v ia Ext2Mgr , specify a disk drive usi ng the drop- ...

  • Geovision GV-UBL1301-0F - page 422

    C. On the Ext2 Volume Manager window, the storage drive is successf ully mounted to your computer when it is indicat ed w ith the disk drive you specified. Figure 22-5 5. Access the recordi ng files from the specif ied drive of your computer. 388 ...

  • Geovision GV-UBL1301-0F - page 423

    Recording an d Playback 22 22.2.2 Pla yback over Net wo rk With the Remote ViewLog functi on, you can play back the files recorded at the GV-IPCAM H.264 over TCP/IP network. 1. The camera needs to allow the remote access with Vi ew Log S er ver activat ed. See 21. 3.7 ViewLog Server . 2. For the first-time user, run the Remote Vie wLog program from ...

  • Geovision GV-UBL1301-0F - page 424

    22.2.3 Access to the Recorded Files through FTP Se rver The built-in FTP Server allows you to download the recorded fi les saved on the memory card. You can play back the downloaded files of AVI form at with Media Player. For details t o dow nload files, s ee [Act as FTP Server], 21.3.2 FTP . Note: To play back videos, ensure you have install ed Ge ...

  • Geovision GV-UBL1301-0F - page 425

    Recording an d Playback 22 22.2.4 Pla yback of Daylig ht Savin g Time Ev ents On GV-System, you can retrieve the event s recorded during the Daylight Saving Time (DST) period from the GV-IPCA M H.264 for playback. You can also connect the memory ca rd to GV-System for playback. The following instruct ions describe how to retrieve t he recorded file ...

  • Geovision GV-UBL1301-0F - page 426

    392 5. On the Video Event list, select desired events , and click the Pl ay button to s tart. Note: 1. The playback function is onl y compatible with the GV-System of version 8.3 and later. 2. The AVI file recorded during the DST period is named with the prefix “GvDST”, e. g. GvDST20081022xxxxxx xxx.avi, t o different iate from the regular AVI ...

  • Geovision GV-UBL1301-0F - page 427

    Chap ter 23 A dv anced A pplication s This chapter introduces more advanced applications. 23.1 Upgrading Sy stem Firm ware GeoVision periodic ally releases updated firm ware on the w ebsite. Sim ply download the new firmware into the GV-IPCA M H.264 using the Web interface or IP Device Utility included in the Software CD. Important Notes before You ...

  • Geovision GV-UBL1301-0F - page 428

    WA R N I N G : The interruption of pow er supply during updat ing causes not only update fai lures but also damages to the camera. In this case, please contact your sal es representative and send your devic e back to GeoVision for repair. 7. Do not turn the power off within 10 minutes after the firmware is updated. 8. If firmware upgrade fails, you ...

  • Geovision GV-UBL1301-0F - page 429

    Advanced Applications 23 23.1.1 U sing the W eb Con figuration Interfac e 1. In the Live View window, click the Show System Menu button (No. 8, Figure 20-3) and select Remote Conf ig . This dialog box appears. Figure 23-2 2. Click the Browse button t o locate the firmware f ile (.img) saved at your local comput er. 3. Click the Upgrade button to st ...

  • Geovision GV-UBL1301-0F - page 430

    23.1.2 Using the I P Device Utilit y The IP Device Utility provi des a direct way to upgrade the firmware to multipl e units of GV-IPCAM H.264. Note the computer used to upgrade firmware must be under the same network of the camera. 1. Inse rt th e So ftw are CD, se lect GeoVis ion IP De vice Util ity , and follow the onscreen i nstructions to inst ...

  • Geovision GV-UBL1301-0F - page 431

    Advanced Applications 23 4. Double-click one camera in the list. This dialog box appears. Figure 23-4 397 ...

  • Geovision GV-UBL1301-0F - page 432

    5. Click the F irmware Upgra de tab. This dialog box appears. Figure 23-5 6. Click the Browse button to locate the firm ware file (.img) saved at your local comput er. 7. If you lik e to upgrade al l the cam eras in the l ist, select Upgrade all devices . 8. Type Password , and click Upgrade t o start the upgrade. 398 ...

  • Geovision GV-UBL1301-0F - page 433

    Advanced Applications 23 23.2 Backing Up and Restoring Settings With the IP Device Utility included in the Softw are CD, you can back up the configurat ions in the GV-IPCAM H.264, and restore the backup data to the current camera or import it to another camera. To back up the settings: 1. Run IP Device Utili ty and locate the desired camera. See St ...

  • Geovision GV-UBL1301-0F - page 434

    5. Type Password , and click the Export settings button to save the backup f ile. To restore the settings: 1. In Figure 23-4, click the Import Sett ings tab. This dialog box appears. Figure 23-7 2. Click the Bro wse butt on to locate the backup fi le (.dat). 3. Sele ct Upgrade all devices to im port the setti ngs into devices of the same type in th ...

  • Geovision GV-UBL1301-0F - page 435

    Advanced Applications 23 23.3 Restoring to Factory Default Settings Please refer t o the corresponding section of your camera type and follow the steps t o restore factory default sett ings. Box Camera 1. Keep the power and network cables connected t o the camera. 2. Use a pin to press and hold the def ault button on the back panel of the camera. D ...

  • Geovision GV-UBL1301-0F - page 436

    Ultra Box Camera and Target Box Camera 1. Keep the power and network cables connected t o the camera. 2. Use a pin to press and hold the def ault button on the back panel of the camera. De faul t bu tton Figure 23-10 3. Release the default button w hen the status LED blinks. This shall take about 8 seconds. Statu s LED Figure 23-11 4. W hen the sta ...

  • Geovision GV-UBL1301-0F - page 437

    Advanced Applications 23 Mi ni Fi xed Do me 1. Keep the power and network cables (or PoE) connected to t he camer a. 2. Press and hold the default bu tton . Defa ult b utt on Status LE D Figure 23-12 (GV-MFD120 / 130 / 220 / 320 / 520) Figure 23-13 (GV-MFD1501 Series / 2401 Series / 2501 Series / 3401 Seri es / 5301 Series) 3. Release the default b ...

  • Geovision GV-UBL1301-0F - page 438

    Mini Fixed Rugged Do me 1. Keep the PoE cabl e connected to the c amera. 2. Press and hold the default bu tton . Stat us L ED Default button Figure 23-14 3. Release the default button w hen the status LED blinks. This shall take about 8 seconds. 4. W hen the status LED fades, the process of loading default settings is completed and the camera reboo ...

  • Geovision GV-UBL1301-0F - page 439

    Advanced Applications 23 Target Mini Fixed Dome a nd Target Mini Fixed Rugged Dome 1. Keep the power and network cables (or PoE) connected to t he camer a. 2. Press and hold the default button for about 8 seconds. Figure 23-15 3. Release the default button w hen the status LED blink s. Figure 23-15 4. W hen the status LED fades, the process of load ...

  • Geovision GV-UBL1301-0F - page 440

    Bullet Camera 1. Keep the power and network cables connected t o the camera. 2. Loosen the camera’s cover and rem ove the Si lica G el B ag . 3. Press and hold the default button for 8 s econds. Default Bu tton Figure 23-16 4. the process of loading default ltra Bullet Camera nd network cables (or PoE) connected to the hold the default b utto n. ...

  • Geovision GV-UBL1301-0F - page 441

    Advanced Applications 23 3. lt button w hen the status LED blinks. This shall the process of loading default settings is arget Bullet Camera d network cables (or PoE) connected to the e camera’s cover. tton for about 8 seconds. Release t he defau take about 8 seconds. 4. W hen the status LED fades, completed and the camera reboots aut omatically. ...

  • Geovision GV-UBL1301-0F - page 442

    PTZ Ca mera There are two types of default settings: camera default settings and system default settings . Camera default settings include all setti ngs on Iris, White Balanc e, Image Reverse and Other in the VISCA OSD Configurati on dialog box (Figure 12-19). System default settings ref er to all the settings except the cam era settings. z To load ...

  • Geovision GV-UBL1301-0F - page 443

    Advanced Applications 23 4. Hold t he default button until the two network LEDs fade. This will take about 25 seconds. Network LEDs Figure 23-20 5. When default loading is completed , the camera will pan and tilt to its full range and return to the home point. PT Ca mera 1. Keep the power and network cables connected t o the camera. 2. Use a pin to ...

  • Geovision GV-UBL1301-0F - page 444

    Vandal Proof IP D ome 1. Keep the power and network cables (or PoE) connected to t he camer a. 2. Use a pin to press and hold the def ault button on the inner housing. Status LED Default button Figure 23-22 3. Release the default button w hen the status LED blinks. This shall take about 8 seconds. 4. W hen the status LED fades, the process of loadi ...

  • Geovision GV-UBL1301-0F - page 445

    Advanced Applications 23 Fixed IP Dome 1. Keep the power and network cables (or PoE) connected to t he camer a. 2. Use a pin to press and hold the def ault button on the panel. Default b utton Sta tus LED Figure 23-23 3. Release the default button w hen the status LED blinks. This shall take about 8 seconds. 4. W hen the status LED fades, the proce ...

  • Geovision GV-UBL1301-0F - page 446

    Cube Camera 1. Keep the power and network cables connected t o the camera. 2. Use a pin to press and hold the def ault button on the panel. Status LED Default button Figure 23-24 3. R ault button when the status LED blinks. This shall urns orange, the process of loading def ault dvanced Cube Camera etwork cables connected to the camera. elease t he ...

  • Geovision GV-UBL1301-0F - page 447

    Advanced Applications 23 3. R fault button when the status LED blinks. This shall take about 8 seconds. he camera is ready for use. elease t he de 4. W hen the status LED turns green, the process of loading default settings is completed and t 413 ...

  • Geovision GV-UBL1301-0F - page 448

    23.4 Changing P assword You change the login password of your GV-IP Camera using GV-IP Devic e Utility. 1. Make sure you have installed and executed GV-I P Device Utility. For details, see steps 1 to 3 in 24.1.2 Using the GV-IP Device Utility . This page appears. Figure 23-26 414 ...

  • Geovision GV-UBL1301-0F - page 449

    Advanced Applications 23 2. Double-click one camera in the list. This window appears. Figure 23-27 3. Type Password , click , select Oth er Settings and then s elect Change Password . This dialog box appears. Figure 23-28 415 ...

  • Geovision GV-UBL1301-0F - page 450

    4. Type the new password in both fields. To change devices of the same type t o the same pass word, select Sync all devices . 5. Click OK to apply the change. 416 ...

  • Geovision GV-UBL1301-0F - page 451

    Advanced Applications 23 23.5 Verify ing Watermark The watermark is an encrypted and digit al signature embedded in the video stream during t he compression stage, protecting t he video from the moment of creation. Watermark ing ensures that an image is not edited or damaged after it is recorded. To enable the watermark funct ion, see [Watermark Se ...

  • Geovision GV-UBL1301-0F - page 452

    23.5.2 Running Wa termark Proof 1. Inst all Watermark Proof fro m the So ftwa re CD . Afte r insta llatio n, a WMProof icon is created on your desktop. 2. Double-c lick the c reated icon. The Water Mark P roof window appears . 3. Click File from the menu bar, select Open and locate the recording (.avi). The select ed recording is then listed on the ...

  • Geovision GV-UBL1301-0F - page 453

    Advanced Applications 23 23.5.3 T he Waterma rk Pr oof Win dow Figure 23-29 The controls in the window: No. Name Descripti on 1 Open File Opens the recording. 2 F ir st Fr am e Goe s to t he f i rst fr am e of th e fi l e. 3 Play Plays the file . 4 Previous Frame Goes to the previous f rame of the f ile. 5 Next Frame Goes to t he nex t frame of the ...

  • Geovision GV-UBL1301-0F - page 454

    23.6 Downloading Vi deos from the Micro SD Card When connections of GV-I P Cameras to the GV-System are lost, recordings are autom atically saved to the memory cards i nserted in the GV-IP Cameras. To automatical ly synchronize and download recordings from the m icro SD c ards to a local folder, install and execute t he GV-SDC ardSy nc Utility prog ...

  • Geovision GV-UBL1301-0F - page 455

    Advanced Applications 23 23.6.1 Inst alling the GV-SDCard Sync Utilit y 1. Download the GV-SD Card Sync Utility program from http://ft p.geovision.tw/FTP/neo/ Utility/GvSDCardS ync_Setup.zi p Note: The GV-SD Card Sync Utility must be install ed on the computer instal led w ith GV- Sys tem V8.5 .4 o r late r. 2. Execute t he GV-SD Card Sy nc Ut ilit ...

  • Geovision GV-UBL1301-0F - page 456

    3. To configure synchronizati on, network and startup settings, see the steps below. Figure 23-31 [Sy nchronization]  Synchronize automatically at an interval: Au tomati cally synchronize vi deos from micro SD cards to a local folder at the specified i nterval.  Synchronize auto matically at: Automatically synchroni ze videos from micro S D c ...

  • Geovision GV-UBL1301-0F - page 457

    Advanced Applications 23 [Network]  Max. download speed of each device (Kb/sec): To ma ke sur e the bandwidth is not completel y taken up while dow nloading fil es from the m emory c ard, specify a maximum download s peed. If you do not want to set a bandwidth limit, type 0 . [General]  Start up automatically at Windows login : GV-SDSync Ut i ...

  • Geovision GV-UBL1301-0F - page 458

    [Recycle]  Rec ycle when the storage spac e is less than (GB): Spec i fy a minimum free space of your local st orage for file recycling.  Keep the downloaded files for (D ays): Specify the number of days to keep the download files at the local hard drive. [Storage Location] To configure the storage path, click the button next to the location ...

  • Geovision GV-UBL1301-0F - page 459

    Advanced Applications 23 23.6.2 T he GV-SDCardSync Utilit y Window After you have inst alled the GV-SDCardSync Util ity, point to Start , select Programs , select GV -S DCa rdS yn c and select to launch the program. This window appears. 1 2 3 4 5 6 Figure 23-33 No. Name Descripti on 1 Play V ideo Plays downloaded recordi ngs of the selected GV-IP C ...

  • Geovision GV-UBL1301-0F - page 460

    426 No. Name Descripti on 5 Log Tab Displays up t o 100 event entries of the GV- SDCar dSync Ut ility. On ce th e entri es are full, recycling will star t from the olde st file. 6 Storage Space Shows the storage space of the designated hard drive. Note: 1. The syn chronization t ime is recorded according to the system time of the GV- IP C amera . 2 ...

  • Geovision GV-UBL1301-0F - page 461

    Chapter 24 DV R Config urations The GV-System provides hybrid sol ution, integrat ing the digital videos from IP cameras with other analog vi deos. For the digital videos, the GV-System provides the com plete video management, such as video viewing, recording, pl ayback, alert setti ngs and almost every feature of the system. Following is t he inte ...

  • Geovision GV-UBL1301-0F - page 462

    • The compatible version of GV-Syst em for each camera model: Camera Models Compatible version of GV-Sy stem GV-BX120D GV-BX220D Series GV-BX320D Series V8.4 or late r GV-BX130D Series GV-BX140DW GV-BX520D V8.5 or late r GV-BX1200-0F ~ 2F GV-BX1200-3V GV-BX1300-0F ~ 2F GV-BX1300-3V GV-BX2400-0F ~ 2F GV-BX2400-3V ~ 4V GV-BX3400-0F ~ 2F GV-BX3400-4 ...

  • Geovision GV-UBL1301-0F - page 463

    DVR Configurations 24 Camera Models Compatible version of GV-Sy stem GV-BX120D-E GV-BX220D-E GV-BX320D-E GV-BX520D-E V8.4 or late r GV-BX1500-E V 8.5.8 or later IR Ar ctic Camera GV-BX2400-E GV-BX3400-E GV-BX5300-E V8.5.7 or la ter GV-MFD120 GV-MFD130 GV-MFD220 GV-MFD320 GV-MFD520 V8.5 or late r GV-MFD1501 Series V 8.5.7 or later GV-MFD2401 Series ...

  • Geovision GV-UBL1301-0F - page 464

    Camera Models Compatible version of GV-System Target Mini Fixed Dome GV-EFD1100 Series GV-EFD2100 Series V8.5.9 or la ter Target Mini Fixed Rugged Dome GV-EDR1100 Seri es GV-EDR2100 Seri es V8.5.9 or la ter GV-BL120D GV-BL220D GV-BL320D V8.4 (with patch fil es) or late r GV-BL130D V8. 5 or later GV-BL1200 GV-BL1300 GV-BL2400 GV-BL3400 GV-BL1210 GV- ...

  • Geovision GV-UBL1301-0F - page 465

    DVR Configurations 24 Camera Models Compatible version of GV-System GV-UBL1211 GV-UBL2411 GV-UBL3411 GV-UBL1301 Seri es GV-UBL2401 Seri es GV-UBL3401 Seri es V8.5.6 or la ter GV-UBL1511 V8. 5.8 or later Ultra Bullet Camera GV-UBL2511 V8. 5.9 or later Target Bullet Camera GV-EBL1100 Series GV-EBL2100 Series V8.5.9 or la ter PTZ Ca mera GV-PTZ010D V8 ...

  • Geovision GV-UBL1301-0F - page 466

    Camera Models Compatible version of GV-Sy stem GV-FD120D GV-FD220D GV-FD320D V8.4.3 (w ith patch files) o r later GV-FD1200 GV-FD2400 GV-FD3400 GV-FD5300GV- FD1210 GV-FD2410 GV-FD3410 V8.5.7 or la ter GV-FD1500 GV-FD1510 V8.5.8 or la ter Fixed IP Dome GV-FD2500 GV-FD2510 V8.5.9 or la ter GV-CB120 GV-CB220 V8.4.3 (w ith patch files) o r later Cube C ...

  • Geovision GV-UBL1301-0F - page 467

    DVR Configurations 24 • The maximum num ber of streams which the GV -IPCAM H.264 allows varies accordi ng to its resolution: Camera Models M a x. N o. of S tr eam s GV-PTZ010D 3 1.3 M models except GV-PTZ010D 8 2 M models 3 M models 5 M models 6 • When a GV-IPCAM H.264 is connected to IE brow ser or any other applicat ions, it takes up 1 stream ...

  • Geovision GV-UBL1301-0F - page 468

    24.1 Setting up an IP Camera To set up the GV-IPCAM H.264 on the GV-System, follow these steps: 1. On t he main screen, click the Configure button, select Sy s te m Configure , sele ct Camera Install and click IP Camera Install . Th is dialog box appears. Figure 24-2 • To add an I P camera from a list of the IP cameras on t he LAN, click Scan Cam ...

  • Geovision GV-UBL1301-0F - page 469

    DVR Configurations 24 2. Click A dd Camera . The dialog box appears. Figure 24-3 3. Type the IP address, username and password of the IP camera. Select t he camera brand and device f rom the drop-down lists. This dialog box appears. Figure 24-4 4. The GV-System will auto matically query for the IP ca mera, and the status will be indicated as “Sta ...

  • Geovision GV-UBL1301-0F - page 470

    5. The options in the setup dialog box may vary depending on the camera model.  Dual S tream: Cl ick this button t o set t he codec t ype to H.264 i n the main stream and to MJPEG in the sub stream, and each stream with a different resol ution. For details on supported versions and resol utions in different cameras, see Appendix G .  Port: Vi ...

  • Geovision GV-UBL1301-0F - page 471

    DVR Configurations 24 24.1.1 Custo mizing I P Ca mera Settin gs After the IP camera is connected and assi gned with a display position, you can conf igure the cam era’s settings s uch as f rame rate, codec type and resoluti on. Right-click the desired camera to s ee the following list of options: Figure 24-6  Change Resoluti on: Changes the di ...

  • Geovision GV-UBL1301-0F - page 472

    ~ Li ve-view Key Frame only : You can c hoose to view the key frames of the videos onl y instead of all frames on the live view. This option i s related t o the GOP sett ing of the IP camera. For example, if the GOP value is set to 30, there is only one key frame among 30 frames.  Li ve-view frame rate control ( Main stream): Sets the live view ...

  • Geovision GV-UBL1301-0F - page 473

    DVR Configurations 24 24.2 Re mote Monitoring with Multi V iew You can use the Multi View to monit or and m anage the GV-IPCAM H.264. 24.2.1 Connecting to the IP Camera 1. On the Multi View w indow, cl ick the Edit Host button. The Edit Host window appears. 2. To create a host, click the New button. You need to create a group before creati ng a hos ...

  • Geovision GV-UBL1301-0F - page 474

    24.3 Re mote Monitoring with E-Ma p You can use the Remote E-Map to monitor and manage the GV-IPCAM H.264. 24.3.1 C reating an E-M ap for th e IP Camera With the E-Map Editor, you can create an E-Map for the GV-IPCAM H.264. The E-Map Editor is available in the two applications: Main Syst em and E- Map Server. The following is an exampl e of running ...

  • Geovision GV-UBL1301-0F - page 475

    DVR Configurations 24 7. Click OK to save the sett ings . 8. Expand the created host folder. Drag and drop the icons of camera and I/O devices onto the import ed E-Map. 9. Close the E-Map Editor. Cl ick Yes when you are promoted to save the fi le. For details on creating an E-Map file on the E-Map Server, see “E-Map Server”, E-Map Applicat ion ...

  • Geovision GV-UBL1301-0F - page 476

    442 24.3.2 Connecting to the IP Camera Depending on where you save the creat ed E-Map file (DVR, E-Map Server or Control Center), t he steps t o open the Remote E-Map window for monitoring may vary s lightly. The following is the connecti on ex ample when you store the E-Map file on the DVR. 1. To enable the remote access to the DVR, click the Netw ...

  • Geovision GV-UBL1301-0F - page 477

    CMS Co nfig uratio ns 25 Chapter 25 CM S Configuratio ns This section introduces the rel ated settings to enable connecting to the GV- IPCAM H.264 in the c entral monitoring s tations Center V2, VSM and Dispatch S erver. 25.1 Center V2 The Center V2 can m onitor and manage the c amera and I /O devices connected to the GV-IPCAM H.264. TCP/ IP Center ...

  • Geovision GV-UBL1301-0F - page 478

    • To set the appropri ate port for IP cam era connection, cl ick the Preference Settings button, sel ect S y stem Configure , click th e Network t ab, and select Accept connections fro m GV-Compact DVR, Vi deo Server & I P Cam . K eep default port 5551 , or m odify it to match the Center V2 port on the IP camera. Figure 25-2 • To define how ...

  • Geovision GV-UBL1301-0F - page 479

    CMS Co nfig uratio ns 25  M anual close channel: Closes the triggered camera view manually.  Cl ose the camera view when motion stopped: Clos es t he triggered cam era view automatically when motion stops.  Post Motion: Specify the duration of the camera view remaining on the m onitoring window after a m otion stops.  Cam era send by I/ ...

  • Geovision GV-UBL1301-0F - page 480

    25.2 VSM The VSM is designed to monitor and manage the camera and I/O devices connect ed to the GV-IPCAM H .264 under low bandwidth network. IP Camera IP Camera TCP/ IP VSM Text Data Figure 25-4 • To set the appropriate port connecting to the IP camera, click Configure on the window menu, and select Syst em Configure to display t his dialog box. ...

  • Geovision GV-UBL1301-0F - page 481

    CMS Co nfig uratio ns 25 25.3 Dispat ch Serv er The Dispatch Server mi nimizes overloading of Cent er V2 Servers by re- distri buting GV-IPCAM H.264 subscribers to the least busy Center V2 Serv er. IP Cam era IP Came ra TCP/ IP Vid eo Data Ce nter V2 Center V2 Dispat ch Ser ver Text Dat a Figure 25-6 447 ...

  • Geovision GV-UBL1301-0F - page 482

    448 • To set the appropriate port connecting to the IP camera, click t he Server Setting button on the toolbar, and select A llow G V IP devices to login as subscriber from port . Keep the default port as 5551 , or modify it to match the Center V2 port on the IP camera. Figure 25-7 For further information on how to mange the video recei ved from ...

  • Geovision GV-UBL1301-0F - page 483

    Smart De vice Conne ction 25 C h a p t e r 2 6 Smart Dev ice Connection You can access the live view and play back rec ordings on your mobile devices usi ng the mobile application GV-Eye . Android Smartphone, tablet, iPad, iPhone and iPod Touch are supported. For details on system requirements , installati on and setup, visit our w ebsit e: http:// ...

  • Geovision GV-UBL1301-0F - page 484

    450 A ppendix A . Settings for Internet Explorer 8 If you use Internet Explorer 8, it is required to c omplete the following setting. 1. Set the Security to M edium -hig h (de fau lt) . 2. Enable A llow previousl y unused ActiveX controls to r un without prompt . 3. Disabl e Only allow approved domains to use A ctiveX without prompt . ...

  • Geovision GV-UBL1301-0F - page 485

    Appendix 451 B. Supported Lenses for Box Camer a Provide r Model No. RV0409D.IR RV0515D.IR Fujia n For ecam O pti cs RV0820D.IR EVD03618F-IR EVD04218F-IR EVD06018F-IR EVD08018F-IR EVD12018F-IR EVETAR EVD16018F-IR Pentax TS3VP213ED-M ...

  • Geovision GV-UBL1301-0F - page 486

    452 C. Resolution and Frame Rate Note that the frame rate and the perform ance may vary depending on the number of connections and dat a bitrates (different scenes). GV-IP Camera Stream Rati o Resolution M ax. Fr am e Rate 4:3 1280 x 960 16:9 1280 x 720 Ma in 5:4 1280 x 1024 4:3 640 x 480 320 x 240 16:9 640 x 360 448 x 252 GV-BL120D GV-BL130D GV-BL ...

  • Geovision GV-UBL1301-0F - page 487

    Appendix 453 GV-IP Camera Stream Rati o Resolution M ax. Fr am e Rate 4:3 1280 x 960 16:9 1280 x 720 Ma in 5:4 1280 x 1024 4:3 640 x 480 320 x 240 16:9 640 x 360 448 x 252 GV-UBL1301 Series GV-UBL1511 GV-UBX1301 Series GV-VD120D GV-VD121D GV-VD122D GV-VD123D GV-VD1500 GV-VD1530 GV-VD1540 Sub 5:4 640 x 512 320 x 256 30 fps Ma in 16:9 1280 x 720 GV-B ...

  • Geovision GV-UBL1301-0F - page 488

    454 GV-IP Camera Stream Rati o Resolution M ax. Fr ame Rate 4:3 1600 x 1200 1280 x 960 16:9 1920 x 1080 1280 x 720 Ma in 5:4 1280 x 1024 4:3 640 x 480 320 x 240 16:9 640 x 360 448 x 252 GV-BL220D GV-BL2400 GV-BL2410 GV-BL2500 GV-BL2510 GV-BL2510-E GV-BX220D Series GV-BX2400 Seri es GV-BX2500 Seri es GV-BX220D-E GV-BX2400-E GV-CA220 GV-CAW220 GV-CB2 ...

  • Geovision GV-UBL1301-0F - page 489

    Appendix 455 GV-IP Camera Stream Rati o Resolution M ax. Fr am e Rate 4:3 1280 x 960 640 x 480 320 x 240 16:9 1920 x 1080 1280 x 720 640 x 360 448 x 252 Ma in 5:4 1280 x 1024 640 x 512 320 x 256 4:3 640 x 480 320 x 240 16:9 640 x 360 448 x 252 GV-EBL2100 Seri es GV-EFD2100 Seri es GV-EDR2100 Series Sub 5:4 640 x 512 320 x 256 30 fps ...

  • Geovision GV-UBL1301-0F - page 490

    456 GV-IP Camera Stream Rati o Resolution M ax. Fr am e Rate 2048 x 1536 20 fps 4:3 1600 x 1200 1280 x 960 Ma in 16:9 1920 x 1080 1280 x 720 5:4 1280 x 1024 4:3 640 x 480 320 x 240 GV-BL320D GV-BL3400 GV-BL3410 GV-BX320D Series GV-BX3400 Seri es GV-BX320D-E GV-BX3400-E GV-FD320D GV-FD3400 GV-FD3410* GV-MDR320 GV-MDR3400 Series GV-MFD320 GV-MFD3401 ...

  • Geovision GV-UBL1301-0F - page 491

    Appendix 457 GV-IP Camera Stream Rati o Resolution M ax. Fr am e Rate 2560 x 1920 10 f ps 2048 x 1536 20 f ps 4:3 1600 x 1200 1280 x 960 16:9 1920 x 1080 1280 x 720 Ma in 5:4 1280 x 1024 4:3 640 x 480 320 x 240 16:9 640 x 360 448 x 252 GV-BL5310 GV-BL5310-E GV-BX520D GV-BX5300 Seri es GV-BX520D-E GV-BX5300-E GV-FD5300 GV-MDR520 GV-MDR5300 Series GV ...

  • Geovision GV-UBL1301-0F - page 492

    458 D. Support Lists • Support L ist for GV-Backup Center, GV-Video Gate way and GV- Recording Server GV-IP Camera Model Supported Version GV-BX120D GV-BX220D Series GV-BX320D Series V1.03 or later GV-BX130D Series V1.04 or later GV-BX520D V1.05 or later Box Camera GV-BX1200 Series GV-BX1300 Series GV-BX2400 Series GV-BX3400 Series GV-BX5300 Seri ...

  • Geovision GV-UBL1301-0F - page 493

    Appendix 459 GV-IP Camera Model Supported Version GV-BL120D GV-BL220D GV-BL320D V1.03 or later Bullet Camera GV-BL130D V1. 04 or later PTZ Ca mera GV-PT Z010D V1.08 or later GV-VD120D Seri es GV-VD220D Seri es Vandal Proof IP D ome GV-VD320D Seri es V1.03 or later Fixed IP Dome GV-FD120D GV-FD220D GV-FD320D V1.03 or later GV-CB120 GV-CB220 V1.03 or ...

  • Geovision GV-UBL1301-0F - page 494

    460 • Support List for Transmit A udio GV-IP Camera Model Supported Version GV-BX120D GV-BX220D Series GV-BX320D Series V1.05 or later GV-BX130D Series V1.04 or later GV-BX520D V1.05 or later Box Camera GV-BX1200 Series GV-BX1300 Series GV-BX2400 Series GV-BX3400 Series GV-BX5300 Series V1.15 or later IR A r ctic Box Camer a GV-BX120D-E GV-BX220D ...

  • Geovision GV-UBL1301-0F - page 495

    Appendix 461 GV-IP Camera Model Supported Version GV-BL120D GV-BL220D GV-BL320D V1.05 or later Bullet Camera GV-BL130D V1. 04 or later PTZ Ca mera GV-PTZ010D V1.08 or later GV-VD120D Seri es GV-VD220D Seri es Vandal Proof IP D ome GV-VD320D Seri es V1.05 or later Fixed IP Dome GV-FD120D GV-FD220D GV-FD320D V1.05 or later GV-CB120 GV-CB220 V1.03 or ...

  • Geovision GV-UBL1301-0F - page 496

    462 • Support List for Sy stem Log GV-IP Camera Model Supported Version GV-BX120D GV-BX220D Series GV-BX320D Series GV-BX130D Series GV-BX520D V1.11 or later Box Camera GV-BX1200 Series GV-BX1300 Series GV-BX2400 Series GV-BX3400 Series GV-BX5300 Series V1.15 or later IR A r ctic Box Camer a GV-BX120D-E GV-BX220D-E GV-BX320D-E GV-BX520D-E V1.11 o ...

  • Geovision GV-UBL1301-0F - page 497

    Appendix 463 GV-IP Camera Model Supported Version Bullet Camera GV-BL120D GV-BL130D GV-BL220D GV-BL320D V1.11 or later PTZ Ca mera GV-PTZ010D V1.08 or later GV-VD120D Seri es GV-VD220D Seri es Vandal Proof IP D ome GV-VD320D Seri es V1.11 or later Fixed IP Dome GV-FD120D GV-FD220D GV-FD320D V1.11 or later Cube Camera GV-CB120 GV-CB220 GV-CBW120 GV- ...

  • Geovision GV-UBL1301-0F - page 498

    464 E. RTSP Protocol Co mmand The GV-IPCAM H.264 can support RTSP protocol for both audio and video st re am in g. z If you use the Quic kTime player, enter: rtsp://<IP of the GV-IPCAM H.264:8554/<CH No.>.sdp For example, rtsp:// 192. 168.3.111 :8554/ CH001 .sdp z If you use the VLC, and if authenticati on is required, enter: rtsp://userna ...

  • Geovision GV-UBL1301-0F - page 499

    Appendix 465 F. The CGI Comman d Please note the support ed version of the CGI command in different models: GV-IP Camera Supported Versio n GV-PTZ010D V1.07 or later GV-BX120D GV-BX220D-2 / 223D-3 GV-BX320D-0 / 320D-1 V1.00 or later GV-BL120D / 220D / 320D GV-VD120D / 121D / 122D / 123D GV-VD220D / 221D / 222D / 223D GV-VD320D / 321D / 322D / 323D ...

  • Geovision GV-UBL1301-0F - page 500

    466 GV-IP Camera Supported Versio n GV-BX1200 Seri es GV-BX1300 Seri es GV-BX2400 Seri es GV-BX3400 Seri es GV-BX5300 Seri es GV-CA120 / 220 GV-CAW120 / 220 V1.15 or later You can use the CGI command to obtain a snapshot of the live view or access the User Account Web interface. For a GV-IPCAM H.264 with the following detail s: IP address: 192. 168 ...

  • Geovision GV-UBL1301-0F - page 501

    Appendix 467 G. Dual Stream Supp ort List The table lists the firmware versions of GV-IP Cameras that support dual stream and the default resolutions after t he camera is added to GV-System. Resolution GV-IP Camera Supported Firmware Version Main St rea m (H.264) Sub Stre am (MJPEG) GV-BX120D V1.00 or later GV-BX1200 Seri es V1.15 or later GV-MFD12 ...

  • Geovision GV-UBL1301-0F - page 502

    468 Resolution GV-IP Camera Supported Firmware Version Main St rea m (H.264) Sub Stre am (MJPEG) GV-BL130D GV-BX130D Series GV-MFD130 V1.04 or later GV-BX1300 Seri es V1.15 or later 1280 x 1024 320 x 256 GV-BX140DW V1.10 or later 1280 x 720 640 x 360 GV-BX220D Series V1.00 or later GV-BX2400 Seri es V1.15 or later GV-MFD220 V1. 05 or later GV-BX220 ...

  • Geovision GV-UBL1301-0F - page 503

    Appendix 469 Resolution GV-IP Camera Supported Firmware Version Main St rea m (H.264) Sub Stre am (MJPEG) GV-BX320D Series V1.00 or later GV-BX3400 Seri es V1.15 or later GV-MFD320 V1. 05 or later GV-BX320D-E GV-MDR320 V1.07 or later GV-BL320D GV-VD320D GV-VD321D GV-VD322D GV-VD323D V1.02 or later GV-FD320D V1.03 or later 2048 x 1536 320 x 240 GV-B ...

  • Geovision GV-UBL1301-0F - page 504

    470 H. Power Supply Support List The supported power type is indicated with a tick ( 9 ) and the unsup ported power type with a cross ( 8 ). GV-IP Camera DC Power AC P ow e r PoE Box Camera 9 8 9 Ultra Box Camera 9 8 9 Target Box Camera 9 8 9 IR A r ctic Box Camer a 8 8 9 Mi ni Fi xed D ome 9 8 9 Mini Fixed Rugged Do me 8 8 9 Target Mini Fixed Dome ...

  • Geovision GV-UBL1301-0F - page 505

    Appendix 471 GV-IP Camera DC Power AC P ow e r PoE Vandal Proof IP D ome 9 9 9 Fixed IP Dome 9 9 9 Cube Camera 9 8 8 GV-CA120/220 9 8 9 A dvanced Cube Camera GV-CAW120/220 9 8 8 ...

  • Geovision GV-UBL1301-0F - page 506

    472 I. Supported Firmware for Flash Memory The 128 MB f lash memory is supported in V1.09 or l ater in all models of GV-IPCam H.264 Series except GV-PTZ010D. To look up if the camera contains a 128 MB type flash memory, access the we b interface or th e GV IP Dev ice Utility : z Web Interface Click Manage ment and click Tool s . The “128 MB” sh ...

  • Geovision GV-UBL1301-0F - page 507

    473 Specifications: Box Camera (Part 1) This section details the specifications on GV-BX120D / 130D S eries / 140DW / 220D Series / 320D Series / 520D . Camera GV-BX120D 1/3" progressi ve scan low lux CMOS GV-BX140DW 1/3" progressive scan CMOS Image Sensor GV-BX130D Series GV-BX220D Series GV-BX320D Series GV-BX520D 1/2.5” progress ive ...

  • Geovision GV-UBL1301-0F - page 508

    474 Color 0.2 Lux B/W 0.08 Lux GV-BX140DW IR On 0 Lux Color 0.15 lux B/W 0.10 Lux Mini mum Illuminati on GV-BX220D Series GV-BX320D Series GV-BX520D IR On 0 Lux GV-BX140DW Au to mati c Shutter Speed GV-BX120D GV-BX130D Series GV-BX220D Series GV-BX320D Series GV-BX520D Automatic, Manual (1/5 ~ 1/8000 sec) White Balance Automatic, Manual (2800K ~ 85 ...

  • Geovision GV-UBL1301-0F - page 509

    Specific ations: Box Came ra (P art 1) 475 GV-BX140DW Up to 100 dB Dy namic Range GV-BX120D GV-BX130D Series GV-BX220D Series GV-BX320D Series GV-BX520D Up to 72 d B Fixed Focal Lens (G V -BX130D-1 only) Megapixel Yes Day /Night Yes (w ith rem ovable IR-cut filter) Focal Length 4.0 mm Maximu m A perture F/1.5 Mount CS Image For mat 1/ 3” Focus M ...

  • Geovision GV-UBL1301-0F - page 510

    476 GV-BX120D GV-BX130D-0 GV-BX140DW GV-BX220D-3 2.8 ~ 12 mm GV-BX320D-0 3. 1 ~ 8 mm GV-BX220D-2 GV-BX320D-1 2.8 ~ 6 mm Focal Length GV-BX520D 4.5 ~ 10 mm GV-BX120D GV-BX130D-0 GV-BX140DW GV-BX220D-3 F/1.4 GV-BX320D-0 F/1. 2 GV-BX220D-2 GV-BX320D-1 F/1.3 Maxi mum Ap e r t u r e GV-BX520D F/1.6 Mount CS GV-BX120D GV-BX130D-0 GV-BX140DW GV-BX220D-2 G ...

  • Geovision GV-UBL1301-0F - page 511

    Specific ations: Box Came ra (P art 1) 477 Focus Manual (w/lock) Zoom Manual (w/loc k) GV-BX120D GV-BX130D-0 GV-BX220D Series GV-BX320D Series DC drive GV-BX140DW Fixed Operation Iris GV-BX520D Manual (w/lock) Max. Torque (Focus/ Zoom Scre ws) 0.049 N.m Operation Video Compression H. 264, MJPEG Video St rea m Dual st reams from H.264 or MJPEG GV-BX ...

  • Geovision GV-UBL1301-0F - page 512

    478 A udio Compressi on G.711, AA C (Optional) A udio Support Two-Way A udio Sensor Input 1 input (Dry Cont act) A larm Output 1 Digit al Output (200mA 5V DC) Note: 1. The frame rate and performance may vary depending on the number of connections and data bitrat es (different scenes ). 2. GV-BX140DW does not support D/N s ensitivity, backli ght com ...

  • Geovision GV-UBL1301-0F - page 513

    Specific ations: Box Came ra (P art 1) 479 16:9 640 x 360, 448 x 252 Stream 5:4 640 x 512, 320 x 256 4:3 2048 x 1536, 1600 x 1200, 1280 x 960, 640 x 480, 320 x 240 16:9 1920 x 1080, 1280 x 720, 640 x 360, 448 x 252 Ma in Stream 5:4 1280 x 1024, 640 x 512, 320 x 256 4:3 640 x 480, 320 x 240 16:9 640 x 360, 448 x 252 GV-BX320D Series Sub Stream 5:4 6 ...

  • Geovision GV-UBL1301-0F - page 514

    480 Mech anical Temperature Detector Yes Power 2-pi n terminal block , PoE Ethernet Ethernet (10/100 Base-T), RJ-45 cable A udio 1 In (Using the built-in microphone or externally connect ing a microphone) 1 Out (Stereo phone jack, 3.5 mm / 0.14’’) GV-BX130D-1 GV-BX140DW GV-BX520D Not functi onal A uto Iris GV-BX120D GV-BX130D-0 GV-BX220D Series ...

  • Geovision GV-UBL1301-0F - page 515

    Specific ations: Box Came ra (P art 1) 481 Genera l Environment Temperature 0°C ~ 50°C (32°F ~ 122°F) Humidi ty 10% to 90% (no condensation) Power Source 12V DC / PoE Max. Power Consumption 7 W Dimens ions (L X W X H) 75.5 x75 x 54 mm (2.97’’ x 2.95’’ x 2.13’’) (without lens) Weight 321 g (0.71 lb) Regulatory CE, FCC, C-Tick , RoHS ...

  • Geovision GV-UBL1301-0F - page 516

    482 Language Arabic / Bulgarian / Czec h / Danish / Dutch / English / Finnish / French / German / Greek / Hebrew / Hungarian / Indonesi an / Italian /Japanes e / Lithuanian / Norwegian / Persian / Polish / P ortuguese / Romanian / Russian / Serbian / S implified Chines e / Slovaki an / Slovenian / Spanish / Swedish / Thai / Traditional Chinese / Tu ...

  • Geovision GV-UBL1301-0F - page 517

    Specific ations: Box Came ra (P art 2) 483 Specifications: Box Camera (Part 2) This section details the specifications on GV-BX1200 Series / 1300 Series / 1500 Series / 2400 Series / 2500 Series / 3400 Series / 5300 Series . Camera GV-BX1200 Seri es 1/3" progressi ve scan low lux CMOS GV-BX1500 Seri es 1/3’’ progress ive scan super low lux ...

  • Geovision GV-UBL1301-0F - page 518

    484 Color 0.15 Lux B/W 0. 10 Lux GV-BX1300 Seri es GV-BX5300 Seri es IR ON 0 Lux Color B/W 0.01 Lux GV-BX1500 Seri es IR ON 0 Lux Color 0.02 Lux B/W 0. 02 Lux GV-BX2500 Seri es IR On 0 Lux Color 0.08 Lux B/W 0. 05 Lux Mini mum Illuminati on GV-BX2400 Seri es GV-BX3400 Seri es IR On 0 Lux Shutter Speed Automatic, Manual (1/5 ~ 1/8000 sec) White Bala ...

  • Geovision GV-UBL1301-0F - page 519

    Specific ations: Box Came ra (P art 2) 485 GV-BX1200 Seri es GV-BX1300 Seri es GV-BX1500 Seri es GV-BX2500 Seri es GV-BX5300 Seri es Up to 72 d B Dy namic Range GV-BX2400 Seri es GV-BX3400 Seri es Up to 100 dB Fixed Focal Lens (GV -BX1200-0F~2F / BX1300-0F~2F / BX1500-0F~2F / BX2400-0F~2F / BX2500-0F~2F / BX3400-0F~2F / BX1500-8F / BX2400-8F / BX25 ...

  • Geovision GV-UBL1301-0F - page 520

    486 GV-BX1200-2F GV-BX1300-2F GV-BX1500-2F GV-BX2400-2F GV-BX2500-2F GV-BX3400-2F 12 mm Focal Length GV-BX1500-8F GV-BX2400-8F GV-BX2500-8F GV-BX3400-8F GV-BX5300-8F 2.8 mm GV-BX1200-0F GV-BX1300-0F GV-BX1500-0F GV-BX2400-0F GV-BX2500-0F GV-BX3400-0F F/1.5 Maximu m A perture GV-BX1200-1F GV-BX1200-2F GV-BX1300-1F GV-BX1300-2F GV-BX1500-1F GV-BX1500 ...

  • Geovision GV-UBL1301-0F - page 521

    Specific ations: Box Came ra (P art 2) 487 Maximu m A perture GV-BX1500-8F GV-BX2400-8F GV-BX2500-8F GV-BX3400-8F GV-BX5300-8F F/1.8 Mount CS GV-BX1200-0F GV-BX1300-0F GV-BX1500-0F GV-BX2400-0F GV-BX2500-0F GV-BX3400-0F 1/3” GV-BX1200-1F GV-BX1200-2F GV-BX1300-1F GV-BX1300-2F GV-BX1500-1F GV-BX1500-2F GV-BX2400-1F GV-BX2400-2F GV-BX2500-1F GV-BX2 ...

  • Geovision GV-UBL1301-0F - page 522

    488 GV-BX1200-0F 63° GV-BX1300-0F 49° GV-BX1500-0F 63° GV-BX2400-0F 58° GV-BX2500-0F 72° GV-BX3400-0F 61° GV-BX1200-1F 36° GV-BX1300-1F 26° GV-BX1500-1F 36° GV-BX2400-1F 32° GV-BX2500-1F 40° GV-BX3400-1F 35° GV-BX1200-2F 23° GV-BX1300-2F 17° GV-BX1500-2F 23° GV-BX2400-2F 21° GV-BX2500-2F 25° GV-BX3400-2F 23° GV-BX1500-8F 90° GV-B ...

  • Geovision GV-UBL1301-0F - page 523

    Specific ations: Box Came ra (P art 2) 489 Torque (Focus Screw) 0. 049 N.m V a rifocal Lens (GV -BX1200-3V / BX1300-3V / BX1500-3V / BX2400-3V / BX2400-4V / BX2500-3V / BX3400-4V / BX3400-5V / BX5300-6V) Megapixel Ye s Day /Night Yes (with removable IR-cut filt er) GV-BX1200-3V GV-BX1300-3V GV-BX1500-3V GV-BX2400-3V GV-BX2500-3V 2.8 ~ 12 mm GV-BX24 ...

  • Geovision GV-UBL1301-0F - page 524

    490 GV-BX1200-3V GV-BX1300-3V GV-BX1500-3V GV-BX2400-3V GV-BX2500-3V GV-BX2400-4V GV-BX3400-4V 1/2.7’’ GV-BX3400-5V 1/ 3’’ Image For mat GV-BX5300-6V 1/ 2’’ GV-BX1200-3V 87° ~ 31° GV-BX1300-3V 64° ~ 23° GV-BX1500-3V 86° ~ 31° GV-BX2400-3V 77° ~ 28° GV-BX2500-3V 105° ~ 36° GV-BX2400-4V 73° ~ 27° GV-BX3400-4V 78° ~ 28° GV-BX ...

  • Geovision GV-UBL1301-0F - page 525

    Specific ations: Box Came ra (P art 2) 491 Torque (Focus / Zoom screws) 0.049 N.m Operation Video Compression H.264, MJPEG Video St rea m Dual streams from H. 264 or MJPEG GV-BX1200 Seri es GV-BX1300 Seri es GV-BX1500 Seri es 30 fps at 1280 x 1024 GV-BX2400 Seri es GV-BX2500 Seri es 30 fps at 1920 x 1080 GV-BX3400 Seri es 20 fps at 2048 x 1536 30 f ...

  • Geovision GV-UBL1301-0F - page 526

    492 Vide o Resolution 4:3 1280 x 960, 640 x 480, 320 x 240 16:9 1280 x 720, 640 x 360, 448 x 252 Ma in Stream 5:4 1280 x 1024, 640 x 512, 320 x 256 4:3 640 x 480, 320 x 240 16:9 640 x 360, 448 x 252 GV-BX1200 Seri es GV-BX1300 Seri es GV-BX1500 Seri es Sub Stream 5:4 640 x 512, 320 x 256 4:3 1600 x 1200, 1280 x 960, 640 x 480, 320 x 240 16:9 1920 x ...

  • Geovision GV-UBL1301-0F - page 527

    Specific ations: Box Came ra (P art 2) 493 4:3 2560 x 1920, 2048 x 1536, 1600 x 1200, 1280 x 960, 640 x 480, 320 x 240 16:9 1920 x 1080, 1280 x 720, 640 x 360, 448 x 252 Ma in Stream 5:4 1280 x 1024, 640 x 512, 320 x 256 4:3 640 x 480, 320 x 240 16:9 640 x 360, 448 x 252 GV-BX5300 Seri es Sub Stream 5:4 640 x 512, 320 x 256 Network Interface 10/100 ...

  • Geovision GV-UBL1301-0F - page 528

    494 A udio 1 In (Using the built-in microphone or externally connecting a microphone) 1 Out (Stereo phone jack, 3.5 mm / 0.14”) GV-BX1200 Seri es GV-BX1300 Seri es GV-BX1500 Seri es GV-BX2400 Seri es GV-BX2500 Seri es GV-BX3400 Seri es Yes (with varifo cal lens) A uto Iris GV-BX5300 Seri es Not functional Local Storage Micro SD card slot (SD/SDHC ...

  • Geovision GV-UBL1301-0F - page 529

    Specific ations: Box Came ra (P art 2) 495 Genera l Environment Temperature 0°C ~ 50°C (32°F ~ 122°F) Humidi ty 10% to 90% (no condensation) Power Sou rce 12V DC / Po E GV-BX1200 Seri es GV-BX1300 Seri es GV-BX1500 Seri es GV-BX2400 Seri es GV-BX3400 Seri es GV-BX5300 Seri es 9.5 W Max . P owe r Consumption GV-BX2500 Seri es 7.99 W Dimens ions ...

  • Geovision GV-UBL1301-0F - page 530

    496 Web Interface Installation Management W eb-based configuration Maintenance Firmware upgrade through Web Browser or Utility A ccess from Web Browser Camera live view, video rec ording, change video quality, bandwidth control, image snapshot, di gital I/O control, audio, Picture in Picture, Pict ure and Picture, Privacy Mask, Visual Automation, T ...

  • Geovision GV-UBL1301-0F - page 531

    Specifica tions: Ul tra Box Camera 497 Specifications: Ultra Box Came ra Camera Image Se nsor 1/2.5’’ progress ive scan CMOS GV-UBX1301 Series 1280 (H) x 1024 (V) GV-UBX2301 Series 1920 (H) x 1080 (V) Picture Eleme nts GV-UBX3301 Series 2048 (H) x 1536 (V) Color 0.15 Lux B/W 0. 10 Lux Mini mum Illuminat ion IR ON 0 Lux Shutter Speed Autom atic, ...

  • Geovision GV-UBL1301-0F - page 532

    498 GV-UBX1301-1F GV-UBX2301-1F GV-UBX3301-1F 4 mm Focal Length GV-UBX1301-2F GV-UBX2301-2F GV-UBX3301-2F 8 mm GV-UBX1301-0F GV-UBX2301-0F GV-UBX3301-0F F/2.0 Maxi mum Ap e r t u r e GV-UBX1301-1F GV-UBX2301-1F GV-UBX3301-1F GV-UBX1301-2F GV-UBX2301-2F GV-UBX3301-2F F/1.6 Mount M12, Pitch 0.5 mm Image For mat 1/3” GV-UBX1301-0F 69° GV-UBX1301-1F ...

  • Geovision GV-UBL1301-0F - page 533

    Specifica tions: Ul tra Box Camera 499 Operation Video Compression H.264, MJPEG Video St rea m Dual streams f rom H. 264 or MJPEG GV-UBX1301 Series 30 fps at 1280 x 1024 GV-UBX2301 Series 30 fps at 1920 x 1080 Frame Rate GV-UBX3301 Series 20 fps at 2048 x 1536 Image Setti ng Brightness , Contrast, Saturation, Sharpness, Gamma, White Balance, Flicke ...

  • Geovision GV-UBL1301-0F - page 534

    500 4:3 1600 x 1200, 1280 x 960, 640 x 480, 320 x 240 16:9 1920 x 1080, 1280 x 720, 640 x 360, 448 x 252 Ma in Stream 5:4 1280 x 1024, 640 x 512, 320 x 256 4:3 640 x 480, 320 x 240 16:9 640 x 360, 448 x 252 GV-UBX2301 Series Sub Stream 5:4 640 x 512, 320 x 256 4:3 2048 x 1536, 1600 x 1200, 1280 x 960, 640 x 480, 320 x 240 16:9 1920 x 1080, 1280 x 7 ...

  • Geovision GV-UBL1301-0F - page 535

    Specifica tions: Ul tra Box Camera 501 Mech anical Temperature Detector Yes Power 2-pin t erminal block, PoE Ethernet E thernet (10/100 Base-T), RJ-45 cable A udio 1 In (Using the built-in microphone) 1 Out (Stereo phone jack, 3.5 mm / 0.14”) Connectors Local Storage Micr o SD card slot (SD/SDHC, vers ion 2.0 only, Class 10) LED Indicator 2 LEDs: ...

  • Geovision GV-UBL1301-0F - page 536

    502 Web Interface Installation Management Web-based configurati on Maintenance Firmware upgrade through Web Browser or Utili ty A ccess from Web Browser Camera live view, video rec ording, change video quality, bandwidth control, image snapshot, audi o, Picture in Picture, Picture and Picture, Privacy Mask, Tampering Alarm, Text Overlay, Di gital P ...

  • Geovision GV-UBL1301-0F - page 537

    Specific ations: Tar get Box Came ra 503 Spe ci fica ti ons: Tar get Box C amera Camera Image Se nsor 1/3’ ’ progr essive sc an lo w lux C MOS Picture El ements 1280 (H) x 1024 (V) Color 0.05 Lux B/W 0.03 Lux Mini mum Illu minatio n IR ON 0 Lux Shutter Speed Automatic, Manual (1/5 ~ 1/800 0 sec) White Balance Automatic , Manual (2 800K ~ 850 0K ...

  • Geovision GV-UBL1301-0F - page 538

    504 Operation (Focus / Zoo m / Iris) Fixed IR L ED Qua nt ity 8 IR LEDs Max. IR Distance 15 m (50 ft) Operation Video Compression H.264, MJPEG Video St rea m Dual stream s from H. 264 o r MJPEG Frame Rate 30 fps at 1280 x 1024 Image Setti ng Brightnes s, Cont rast, S aturatio n, Sharpn ess, Gamma, W hite Balance , Flicker-l ess, Im age O rientati o ...

  • Geovision GV-UBL1301-0F - page 539

    Specific ations: Tar get Box Came ra 505 Network Interface 10/100 Eth ernet Protocol DHCP, DynDNS, FTP, HT TP, HTTPS, NT P, ONVIF (Prof ile S), QoS (DSCP), RTSP, SNMP, SMTP, TCP, UDP, UPnP, 3GPP/ISMA Mech anical Power 2-pi n term inal block , PoE Ethernet Etherne t (10/ 100 Bas e-T), R J-45 cable Connectors Audio 1 In (built-i n mi crophon e) LED I ...

  • Geovision GV-UBL1301-0F - page 540

    506 Web Interface Installation Management Web-based co nfigurati on Maintenance Fi rmware upgrade thro ugh W eb Bro wser or Utili ty A ccess from Web Browser Camera l ive vie w, video recor ding, cha nge vid eo qualit y, band width cont rol, i mage sn aps hot, audi o, Picture in P ictu re, Pict ure and Picture, Pri vacy Mask, Tampering Alarm , Text ...

  • Geovision GV-UBL1301-0F - page 541

    Specific ations: IR Arc tic Box Came ra 507 Specifications: I R Arctic Box Camera Camera GV-BX120D-E 1/3" progress ive scan low lux CMOS GV-BX1500-E 1/3" progressive sc an super low lux CMOS GV-BX2400-E GV-BX3400-E 1/3.2" progress ive scan CMOS Image Sensor GV-BX220D-E GV-BX320D-E GV-BX520D-E GV-BX5300-E 1/2.5” progress ive scan CM ...

  • Geovision GV-UBL1301-0F - page 542

    508 Color 0.08 Lux B/W 0.05 Lux GV-BX2400-E GV-BX3400-E IR ON 0 Lux Color 0.15 Lux B/W 0.10 Lux Mini mum Illuminati on GV-BX220D-E GV-BX320D-E GV-BX520D-E GV-BX5300-E IR ON 0 Lux Shutter Speed A utomatic, Manual (1/5 ~ 1/8000 sec) White Balance Automatic, Manual (2800K ~ 8500K) Gain Co ntrol Automa tic GV-BX120D-E 50 dB GV-BX1500-E 55 dB GV-BX2400- ...

  • Geovision GV-UBL1301-0F - page 543

    Specific ations: IR Arc tic Box Came ra 509 Lens Megapixel Yes Day /Night Yes (with rem ovable IR-c ut filt er) Lens Ty pe Va rifoca l Focal Length GV-BX120D-E 2.8 ~ 12 mm GV-BX220D-E GV-BX320D-E 2.8 ~ 6 mm GV-BX1500-E GV-BX2400-E GV-BX3400-E 3 ~ 10.5 mm Focal Length GV-BX520D-E GV-BX5300-E 4.5 ~ 10 mm GV-BX120D-E GV-BX1500-E GV-BX2400-E GV-BX3400- ...

  • Geovision GV-UBL1301-0F - page 544

    510 GV-BX1500-E 81° ~ 29° GV-BX2400-E 73° ~ 27° GV-BX3400-E 78° ~ 28° Horizontal FOV GV-BX5300-E 70° ~ 34° Focus Manual ( w/lock) Operation Zoom M anual (w/loc k) GV-BX120D-E GV-BX1500-E GV-BX220D-E GV-BX2400-E GV-BX320D-E GV-BX3400-E DC drive Operation Iris GV-BX520D-E GV-BX5300-E Manual (w/lock ) IR Qua nt ity 4 Max. IR Distance 15 m (50 ...

  • Geovision GV-UBL1301-0F - page 545

    Specific ations: IR Arc tic Box Came ra 511 GV-BX120D-E GV-BX1500-E 30 fps at 1280 x 1024 GV-BX220D-E GV-BX2400-E 30 fps at 1920 x 1080 GV-BX320D-E GV-BX3400-E 20 fps at 2048 x 1536 30 fps at 1920 x 1080 Frame Rate GV-BX520D-E GV-BX5300-E 10 fps at 2560 x 1920 Image Setti ng Brightness , Contrast, Saturation, Sharpness, Gamma, White Balance, Flicke ...

  • Geovision GV-UBL1301-0F - page 546

    512 4:3 1600 x 1200, 1280 x 960, 640 x 480, 320 x 240 16:9 1920 x 1080, 1280 x 720, 640 x 360, 448 x 252 Ma in Stream 5:4 1280 x 1024, 640 x 512, 320 x 256 4:3 640 x 480, 320 x 240 16:9 640 x 360, 448 x 252 GV-BX220D-E Sub Stream 5:4 640 x 512, 320 x 256 4:3 2048 x 1536, 1600 x 1200, 1280 x 960, 640 x 480, 320 x 240 16:9 1920 x 1080, 1280 x 720, 64 ...

  • Geovision GV-UBL1301-0F - page 547

    Specific ations: IR Arc tic Box Came ra 513 4:3 1280 x 960, 640 x 480, 320 x 240 16:9 1280 x 720, 640 x 360, 448 x 252 Ma in Stream 5:4 1280 x 1024, 640 x 512, 320 x 256 4:3 640 x 480, 320 x 240 16:9 640 x 360, 448 x 252 GV-BX1500-E Sub Stream 5:4 640 x 512, 320 x 256 4:3 1600 x 1200, 1280 x 960, 640 x 480, 320 x 240 16:9 1920 x 1080, 1280 x 720, 6 ...

  • Geovision GV-UBL1301-0F - page 548

    514 4 : 3 2560 x 1920, 2048 x 1536, 1600 x 1200, 1280 x 960, 640 x 480, 320 x 240 16 :9 1920 x 1080, 1280 x 720, 640 x 360, 448 x 252 Ma in Stream 5 : 4 1280 x 1024, 640 x 512, 320 x 256 4 : 3 640 x 480, 320 x 240 16 :9 640 x 360, 448 x 252 GV-BX5300-E Sub Stream 5 : 4 640 x 512, 320 x 256 Network Interface 10/100 Ethernet Protocol DHCP, DynDNS , F ...

  • Geovision GV-UBL1301-0F - page 549

    Specific ations: IR Arc tic Box Came ra 515 Power PoE Ethernet Ethernet (10/100 Base-T), RJ-45 cable A udio 1 In (externally connect ing a microphone) 1 Out (Stereo phone jack , 3.5 mm / 0.14”) GV-BX120D-E GV-BX1500-E GV-BX220D-E GV-BX2400-E GV-BX320D-E GV-BX3400-E DC Drive A uto Iris GV-BX520D-E GV-BX5300-E Not functi onal Connectors TV-O ut BNC ...

  • Geovision GV-UBL1301-0F - page 550

    516 GV-BX2400-E GV-BX3400-E 23 W Max . P owe r Consumption GV-BX5300-E 21.6 W Dimensions 100.5 x 100.5 x 317.5 mm (3.96’’ x 3.96’’ x 12.5’’) Weight 3. 2 kg (7.11 lb) GV-BX120D-E GV-BX220D-E GV-BX320D-E GV-BX520D-E GV-BX2400-E GV-BX3400-E GV-BX5300-E CE, FCC, C-T ick, RoHS compliant Regulatory GV-BX1500-E CE, FCC, RCM, RoHS compl iant In ...

  • Geovision GV-UBL1301-0F - page 551

    Specific ations: IR Arc tic Box Came ra 517 Web Interface Installation Management W eb-based configuration Maintenance Firmware upgrade through Web Browser or Utility A ccess from Web Browser Camera live view, video rec ording, change video quality, bandwidth control, image snapshot, audi o, Picture in Picture, Picture and Picture, Privacy Mask, Ta ...

  • Geovision GV-UBL1301-0F - page 552

    518 Ethernet Cable Length Max 100 m / 328 ft from GV-PA481 to IP device, CAT5 Power Inp ut A C 100V ~ 240V, 2A Operating Temperature 0°C ~ 40°C (32°F ~ 104°F) Dimensions (L x W x H) 138 x 104 x 38 mm (5.43’’ x 4.09’’ x 1.5’’) Weight 610 g (13.42 lbs) All specific ations are subject to change without notice. ...

  • Geovision GV-UBL1301-0F - page 553

    Specific ations: Mi ni Fixed Dome (Part 1) 519 Specifications: Mini Fixed D ome (Part 1) This section details the specifications on GV-MFD120 / 130 / 220 / 320 / 520 . Camera GV-MFD120 1/3" progressi ve scan low lux CMOS Image Sensor GV-MFD130 GV-MFD220 GV-MFD320 GV-MFD520 1/2.5’’ progress ive scan CMOS GV-MFD120 GV-MFD130 1280 (H) x 1024 ...

  • Geovision GV-UBL1301-0F - page 554

    520 GV-MFD120 50 dB S/N Ratio GV-MFD130 GV-MFD220 GV-MFD320 GV-MFD520 45 dB WDR Yes Dynamic Range Up to 72 d B Lens Megapixel Yes Day /Night Yes (elect ronic) Lens Ty pe Fixed GV-MFD120 4.05 mm Focal Length GV-MFD130 GV-MFD220 GV-MFD320 GV-MFD520 2.54 mm GV-MFD120 F/1.5 Maxi mum Ap e r t u r e GV-MFD130 GV-MFD220 GV-MFD320 GV-MFD520 F/2.8 Mount M12 ...

  • Geovision GV-UBL1301-0F - page 555

    Specific ations: Mi ni Fixed Dome (Part 1) 521 GV-MFD120 67° GV-MFD130 85° GV-MFD220 101° GV-MFD320 110° Horizontal FOV GV-MFD520 138° Operation (Focus / Zo om / Ir is) Fixed Note: For GV-MFD, the day/night function is only supported by V1.07 or later. Operation Video Compression H.264, MJPEG Video St rea m Dual streams f rom H.264 or MJPEG GV ...

  • Geovision GV-UBL1301-0F - page 556

    522 Note : The frame rate and performance may vary depending on the number of connections and data bitrat es (different scenes ). Vide o Resolution 4:3 1280 x 960, 640 x 480, 320 x 240 16:9 1280 x 720, 640 x 360, 448 x 252 GV-MFD120 GV-MFD130 Ma in St re a m 5:4 1280 x 1024, 640 x 512, 320 x 256 4:3 640 x 480, 320 x 240 16:9 640 x 360, 448 x 252 GV ...

  • Geovision GV-UBL1301-0F - page 557

    Specific ations: Mi ni Fixed Dome (Part 1) 523 4:3 2560 x 1920, 2048 x 1536, 1600 x 1200, 1280 x 960, 640 x 480, 320 x 240 16:9 1920 x 1080, 1280 x 720, 640 x 360, 448 x 252 Main St rea m 5:4 1280 x 1024, 640 x 512, 320 x 256 4:3 640 x 480, 320 x 240 16:9 640 x 360, 448 x 252 GV-MFD520 Sub Stream 5:4 640 x 512, 320 x 256 Network Interface 10/100 Et ...

  • Geovision GV-UBL1301-0F - page 558

    524 A udio GV-MFD120 GV-MFD130 GV-MFD220 GV-MFD320 GV-MFD520 1 In (Built-in microphone) Connectors Local Storage Micr o SD card slot (SD /SDH C, version 2.0 onl y, Class 10) LED Indicator 4 LEDs: Link, ACT, Power, Status Note: SDXC and UHS-I card types are not supported. Genera l Environment Temperature 0°C ~ 50°C (32°F ~ 122°F) Humidi ty 10% - ...

  • Geovision GV-UBL1301-0F - page 559

    Specific ations: Mi ni Fixed Dome (Part 1) 525 GV-MFD120 275 g (0.61 lb) Weight GV-MFD130 GV-MFD220 GV-MFD320 GV-MFD520 280 g (0.62 lb) Regulatory CE, FCC, C-T ick, UL, RoHS complian t Pow er over Et hernet PoE Stan dard IEEE 802.3af Power over Ethernet / PD PoE Pow er Suppl y Type End-Span and Mid-Span PoE Pow er Outpu t Per Port 48V DC, 350 mA. M ...

  • Geovision GV-UBL1301-0F - page 560

    526 Language Arabic / Bulgarian / Czech / Danish / Dutch / E nglish / Finnish / French / German / Greek / Hebrew / Hungarian / Indonesian / Itali an /Japanese / Lithuanian / Norwegian / Persian / Poli sh / Portugues e / Romanian / Russian / Serbian / Simplified Chi nese / Slovakian / Slovenian / Spanish / Swedish / Thai / Traditional Chinese / Turk ...

  • Geovision GV-UBL1301-0F - page 561

    Specific ations: Mi ni Fixed Dome (Part 2) 527 Specifications: Mini Fixed D ome (Part 2) This section details the specifications on GV-MFD1501 series / 2401 series / 2501 series / 3401 series / 5301 series . Camera GV-MFD1501 Series 1/3’’ progressive s can super low lux C MOS GV-MFD2501 Series 1/2.8’’ progressive sc an super low lux CMOS GV ...

  • Geovision GV-UBL1301-0F - page 562

    528 Shutter Speed Automatic, Manual (1/5 ~ 1/8000 sec) White Balance Automatic, Manual (2800K ~ 8500K) Gain Co ntrol Auto matic GV-MFD1501 Series GV-MFD2401 Series GV-MFD3401 Series GV-MFD5301 Series 55 dB S/N Ratio GV-MFD2501 Series 52 dB WDR Pro GV-MFD2401 Series GV-MFD3401 Series Yes WDR Yes GV-MFD1501 Series GV-MFD2501 Series GV-MFD5301 Series ...

  • Geovision GV-UBL1301-0F - page 563

    Specific ations: Mi ni Fixed Dome (Part 2) 529 GV-MFD1501 -1F GV-MFD2401 -1F GV-MFD2501 -1F GV-MFD3401 -1F GV-MFD5301 -1F 4 mm GV-MFD1501 -2F GV-MFD2401 -2F GV-MFD2501 -2F GV-MFD3401 -2F GV-MFD5301 -2F 8 mm GV-MFD1501 -3F GV-MFD2401 -3F GV-MFD2501 -3F GV-MFD3401 -3F GV-MFD5301 -3F 12 mm Focal Length GV-MFD1501 -4F GV-MFD2401 -4F GV-MFD2501 -4F GV-M ...

  • Geovision GV-UBL1301-0F - page 564

    530 GV-MFD1501 -2F GV-MFD1501 -3F GV-MFD2401 -2F GV-MFD2401 -3F GV-MFD2501 -2F GV-MFD2501 -3F GV-MFD3401 -2F GV-MFD3401 -3F GV-MFD5301 -2F GV-MFD5301 -3F F/1.6 Maxi mum Ap e r t u r e GV-MFD1501 -4F GV-MFD2401 -4F GV-MFD2501 -4F GV-MFD3401 -4F F/1.8 Mount M12, Pitch 0.5 mm Image For mat 1/3’’ GV-MFD1501 -0F 87° GV-MFD2401 -0F 79° GV-MFD2501 - ...

  • Geovision GV-UBL1301-0F - page 565

    Specific ations: Mi ni Fixed Dome (Part 2) 531 GV-MFD2501 -2F 38° GV-MFD3401 -2F 33° GV-MFD5301 -2F 41° GV-MFD1501 -3F 22° GV-MFD2401 -3F 20° GV-MFD2501 -3F 25° GV-MFD3401 -3F 21° GV-MFD5301 -3F 26° GV-MFD1501 -4F 124° GV-MFD2401 -4F 112° GV-MFD2501 -4F 150° Horizontal FOV GV-MFD3401 -4F 120° Operation (Focus / Zo om / Ir is) Fixed Note ...

  • Geovision GV-UBL1301-0F - page 566

    532 Image Setti ng Brightness , Contrast, Saturation, Sharpness, Gamma, White Balance, Flicker-less 50/60 Hz, Image Orientati on, Shutter Speed, Backlight Compensat ion, D/N sensitivit y, WDR, Defog, Super Low Lux, Denoise, Metering A udio Compressi on G.711, AA C (Optional) A udio Support Two- W ay Audio Sensor Input No A larm Output No Note : 1. ...

  • Geovision GV-UBL1301-0F - page 567

    Specific ations: Mi ni Fixed Dome (Part 2) 533 4:3 1600 x 1200, 1280 x 960, 640 x 480, 320 x 240 16:9 1920 x 1080, 1280 x 720, 640 x 360, 448 x 252 Main St rea m 5:4 1280 x 1024, 640 x 512, 320 x 256 4:3 640 x 480, 320 x 240 16:9 640 x 360, 448 x 252 GV-MFD2401 Series GV-MFD2501 Series Sub Stream 5:4 640 x 512, 320 x 256 4:3 2048 x 1536, 1600 x 120 ...

Manufacturer Geovision Category Security camera

Documents that we receive from a manufacturer of a Geovision GV-UBL1301-0F can be divided into several groups. They are, among others:
- Geovision technical drawings
- GV-UBL1301-0F manuals
- Geovision product data sheets
- information booklets
- or energy labels Geovision GV-UBL1301-0F
All of them are important, but the most important information from the point of view of use of the device are in the user manual Geovision GV-UBL1301-0F.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Geovision GV-UBL1301-0F, service manual, brief instructions and user manuals Geovision GV-UBL1301-0F. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Geovision GV-UBL1301-0F.

Similar manuals

A complete manual for the device Geovision GV-UBL1301-0F, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Geovision GV-UBL1301-0F by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Geovision GV-UBL1301-0F.

A complete Geovision manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Geovision GV-UBL1301-0F - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Geovision GV-UBL1301-0F, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Geovision GV-UBL1301-0F, that we can find in the current document
3. Tips how to use the basic functions of the device Geovision GV-UBL1301-0F - which should help us in our first steps of using Geovision GV-UBL1301-0F
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Geovision GV-UBL1301-0F
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Geovision GV-UBL1301-0F in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Geovision GV-UBL1301-0F?

Use the form below

If you did not solve your problem by using a manual Geovision GV-UBL1301-0F, ask a question using the form below. If a user had a similar problem with Geovision GV-UBL1301-0F it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)