-
Servis-Rhino 60/72 - page 1
TREE CUTTER LUMBERJACK 60/72 ® Revised 02-02 Effective Serial No. LJ 60-10001 Through Current P/N 00772058C Effective Serial No. LJ 72- 10330Through Current © 2004 Alamo Group Inc. RHINO ® 1020 S. Sangamon A ve. Gibson City , IL 60936 800-446-5158 Email: parts@servis-rhino.com $0.00 OPERA T OR'S MANUAL This Operator's Manual is an inte ...
-
Servis-Rhino 60/72 - page 2
TO THE OWNER/OPERA T OR/DEALER All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the c ...
-
Servis-Rhino 60/72 - page 3
In order to reduce accidents and enhance the safe operation of mowers, Alamo Gr oup Ag Division, in cooperation with other industry manufacturers has developed the AEM/FEMA Industrial and Agricultural Mower Safety Practices video and guide book. The video will familiarize and instruct mower-tractor operators in safe practices when using industrial ...
-
Servis-Rhino 60/72 - page 4
Alamo Group Ag. Division is willing to provide one (1) AEM Mower Safety Practices V ideo Please Send Me: VHS Format – AEM/FEMA Mower Operator Safety V ideo DVD Format – AEM/FEMA Mower Operator Safety V ideo Mower Operator ’ s Manual AEM Mower Operator ’ s Safety Manual Requester Name: Phone: Requester Address: City State Zip Code Mower Mode ...
-
Servis-Rhino 60/72 - page 5
T ABLE OF CONTENTS SAFETY SECTION ................................................................................................................. ..................... 1-1 Safety Information ............................................................................................................. ..................... 1-2 Safety Decal Locatio ...
-
Servis-Rhino 60/72 - page 6
...
-
Servis-Rhino 60/72 - page 7
SAFETY SECTION Safety Section 1-1 ...
-
Servis-Rhino 60/72 - page 8
Safety Section 1-2 LJ60/72 02-02 © 2004 Alamo Group Inc. SAFETY SAFETY A safe and careful operator is the best operator . Safety is of primary importance to the manufac- turer and should be to the owner/operator . Most accidents can be avoided by being aware of your equipment, your surroundings, and observing certain precautions. The first section ...
-
Servis-Rhino 60/72 - page 9
Safety Section 1-3 LJ60/72 02-02 © 2004 Alamo Group Inc. SAFETY SAFETY Si no lee Ingles, pida ayuda a alguien que si lo lea para que le traduzca las medidas de seguridad. (SG-3) PELIGRO! ¡LEA EL INSTRUCTIVO! DANGER! Never operate the Tractor or Implement until you have read and completely understand this Manual, the Tractor Operator’s Manual, a ...
-
Servis-Rhino 60/72 - page 10
Safety Section 1-4 LJ60/72 02-02 © 2004 Alamo Group Inc. SAFETY SAFETY DANGER! Never allow children to operate or ride on the Tractor or Implement. (SGM-11) WARNING! Do not mount the Tractor while the tractor is moving. Mount the Tractor only when the Tractor and all moving parts are completely stopped. (SG-12) DANGER! Start tractor only when prop ...
-
Servis-Rhino 60/72 - page 11
Safety Section 1-5 LJ60/72 02-02 © 2004 Alamo Group Inc. SAFETY SAFETY WARNING! T ransport only at safe speeds. Serious accidents and injuries can re- sult from operating this equipment at unsafe speeds. Understand the T ractor and Implement and how it handles before transporting on streets and highways. Make sure the T ractor steering and brakes ...
-
Servis-Rhino 60/72 - page 12
Safety Section 1-6 LJ60/72 02-02 © 2004 Alamo Group Inc. SAFETY SAFETY DANGER! KEEP AWAY FROM ROTATING ELEMENTS to prevent entanglement and possible serious injury or death. (SG-24) DANGER! Never allow children to play on or around Tractor or Implement. Children can slip or fall off the Equipment and be injured or killed. Children can cause the Im ...
-
Servis-Rhino 60/72 - page 13
Safety Section 1-7 LJ60/72 02-02 © 2004 Alamo Group Inc. SAFETY SAFETY DANGER! All Safety Shields, Guards and Safety devices including (but not limited to) - the Deflectors, Chain Guards, Steel Guards, Gearbox Shields, Hydraulic Tank Shields, and Retractable Door Shields should be used and main- tained in good working condition. All safety devices ...
-
Servis-Rhino 60/72 - page 14
Safety Section 1-8 LJ60/72 02-02 © 2004 Alamo Group Inc. SAFETY SAFETY DANGER! Replace bent or broken blade with new blades. NEVER ATTEMPT TO STRAIGHTEN BLADES SINCE THIS WILL LIKELY CRACK OR OTHERWISE DAMAGE THE BLADE WITH SUBSEQUENT FAILURE AND POSSIBLE SERIOUS INJURY FROM THROWN BLADES. (SGM-10) WARNING! Do not mow with two machines in the same ...
-
Servis-Rhino 60/72 - page 15
Safety Section 1-9 LJ60/72 02-02 © 2004 Alamo Group Inc. SAFETY SAFETY DANGER! There are obvious and hidden potential hazards in the operation of this Implement as in all power-driven or pulled equipment. REMEMBER! This machine is often operated in rough terrain conditions that include tall grass, weeds, gullies, holes, slopes, hidden obstructions ...
-
Servis-Rhino 60/72 - page 16
Safety Section 1-10 LJ60/72 02-02 © 2004 Alamo Group Inc. SAFETY SAFETY PARTS INFORMATION Servis-Rhino mowers use balanced and matched system components for blade carriers, blades, cuttershafts, knives, knife hangers, rollers, drivetrain components, and bearings. These parts are made and tested to Servis-Rhino specifications. Non-genuine "wil ...
-
Servis-Rhino 60/72 - page 17
Safety Section 1-11 LJ60/72 02-02 © 2004 Alamo Group Inc. SAFETY SAFETY ITEM PART NO. Q T Y LEVEL DESCRIPTION 1 00749117 1 DANGER Multi-Hazard 2 00756004 (*1) DANGER D/L Shield missing 3 00725746 1 PELIGRO Translate Safety Material 4 00756005 (*1) DANGER Rotating Driveline 5 02962764 2 DANGER Pinch Point 6 00756494 (1) DANGER Driveline Hazards 7 0 ...
-
Servis-Rhino 60/72 - page 18
Safety Section 1-12 LJ60/72 02-02 © 2004 Alamo Group Inc. SAFETY SAFETY 1 - - 00749117 - Not Shown (See Inside Front Cover of Manual) 11 - - 03200347 SMV Reflector 2 - 00756004 3 - 00725746 4 - 00756005 6 - 00756494 7 - 00760657 18 - 00776481 ...
-
Servis-Rhino 60/72 - page 19
Safety Section 1-13 LJ60/72 02-02 © 2004 Alamo Group Inc. SAFETY SAFETY 13 - 00763977 10 - D103 10 - D114 9 - 00769737 8 - 00769736 14 - D303 15 - 00771818 12 - 00763613 7A - 00773723 LUMBERJACK 5 - 02962764 ...
-
Servis-Rhino 60/72 - page 20
Safety Section 1-14 LJ60/72 02-02 © 2004 Alamo Group Inc. SAFETY SAFETY This section is intended to explain in broad terms the concept and effect of federal laws and regulations concerning employer and employee equipment operators. This section is not intended as a legal interpretation of the law and should not be considered as such. Employer-Empl ...
-
Servis-Rhino 60/72 - page 21
...
-
Servis-Rhino 60/72 - page 22
...
-
Servis-Rhino 60/72 - page 23
...
-
Servis-Rhino 60/72 - page 24
...
-
Servis-Rhino 60/72 - page 25
...
-
Servis-Rhino 60/72 - page 26
...
-
Servis-Rhino 60/72 - page 27
...
-
Servis-Rhino 60/72 - page 28
...
-
Servis-Rhino 60/72 - page 29
...
-
Servis-Rhino 60/72 - page 30
...
-
Servis-Rhino 60/72 - page 31
...
-
Servis-Rhino 60/72 - page 32
...
-
Servis-Rhino 60/72 - page 33
...
-
Servis-Rhino 60/72 - page 34
...
-
Servis-Rhino 60/72 - page 35
...
-
Servis-Rhino 60/72 - page 36
...
-
Servis-Rhino 60/72 - page 37
...
-
Servis-Rhino 60/72 - page 38
...
-
Servis-Rhino 60/72 - page 39
...
-
Servis-Rhino 60/72 - page 40
...
-
Servis-Rhino 60/72 - page 41
...
-
Servis-Rhino 60/72 - page 42
...
-
Servis-Rhino 60/72 - page 43
...
-
Servis-Rhino 60/72 - page 44
...
-
Servis-Rhino 60/72 - page 45
...
-
Servis-Rhino 60/72 - page 46
...
-
Servis-Rhino 60/72 - page 47
...
-
Servis-Rhino 60/72 - page 48
...
-
Servis-Rhino 60/72 - page 49
...
-
Servis-Rhino 60/72 - page 50
...
-
Servis-Rhino 60/72 - page 51
...
-
Servis-Rhino 60/72 - page 52
...
-
Servis-Rhino 60/72 - page 53
...
-
Servis-Rhino 60/72 - page 54
...
-
Servis-Rhino 60/72 - page 55
...
-
Servis-Rhino 60/72 - page 56
...
-
Servis-Rhino 60/72 - page 57
...
-
Servis-Rhino 60/72 - page 58
...
-
Servis-Rhino 60/72 - page 59
...
-
Servis-Rhino 60/72 - page 60
...
-
Servis-Rhino 60/72 - page 61
...
-
Servis-Rhino 60/72 - page 62
...
-
Servis-Rhino 60/72 - page 63
...
-
Servis-Rhino 60/72 - page 64
...
-
Servis-Rhino 60/72 - page 65
INTRODUCTION SECTION Introduction Section 2-1 ...
-
Servis-Rhino 60/72 - page 66
INTRODUCTION Introduction Section 2-2 LJ60/72 02-02 © 2004 Alamo Group Inc. INTRODUCTION CAUTION WARNING DANGER This Cutter is designed with care and built with quality materials by skilled workers. Proper assembly, maintenance, and operating practices, as described in this manual, will help the owner/operator get years of satisfactory service fro ...
-
Servis-Rhino 60/72 - page 67
Introduction Section 2-3 INTRODUCTION LJ60/72 02-02 © 2004 Alamo Group Inc. INTRODUCTION This cutter is available in lift-type models only. These rugged Cutters are designed for heavy-duty work. They can cut brush up to 6" in diameter. For Non-Agricultural use, OSHA, ASAE, SAE, and ANSI standards require the use of Chain Guards, Deflectors, o ...
-
Servis-Rhino 60/72 - page 68
...
-
Servis-Rhino 60/72 - page 69
ASSEMBL Y SECTION Assembly Section 3-1 ...
-
Servis-Rhino 60/72 - page 70
ASSEMBL Y Assembly Section 3-2 LJ60/72 02-02 © 2004 Alamo Group Inc. This Cutter will attach to most tractors with Cat. II & III and II & III Quick Hitch. The Lumberjack can be purchased for tractors with 540 or 1000 RPM PTO. DEALER SET-UP INSTRUCTIONS Assembly of this mower is the responsibility of the Servis-Rhino dealer. The mower shoul ...
-
Servis-Rhino 60/72 - page 71
Assembly Section 3-3 ASSEMBL Y © 2004 Alamo Group Inc. LJ60/72 02-02 The Components of these machines are quite heavy. Block all components up securely before working under or putting extremities under such parts. CAUTION! A-FRAME ASSEMBL Y (FIGURE 2) 60" MODEL T o assemble the Mower ’s A-Frame, follow the procedures listed below: 1. One si ...
-
Servis-Rhino 60/72 - page 72
ASSEMBL Y Assembly Section 3-4 LJ60/72 02-02 © 2004 Alamo Group Inc. FRONT CHAINGUARD ASSEMBLY 60" MODEL Install front chainguard as illustrated below. Do not operate Cutter without Front Chainguard in place. CAUTION! NOTE: Access window must be removed for installation of shield to gearbox. This access window will also need to be used for mo ...
-
Servis-Rhino 60/72 - page 73
Assembly Section 3-5 ASSEMBL Y © 2004 Alamo Group Inc. LJ60/72 02-02 FRONT CHAINGUARD ASSEMBLY 72 MODEL Install front chainguard as illustrated below. Do not operate Cutter without Front Chainguard in place. CAUTION! 12 14 12 5 11 1 2 3 12 11 10 13 13 4 13 6 7 9 8 ...
-
Servis-Rhino 60/72 - page 74
...
-
Servis-Rhino 60/72 - page 75
OPERA TION SECTION Operation Section 4-1 ...
-
Servis-Rhino 60/72 - page 76
OPERA TION LJ60/72 02-02 Operation Section 4-2 OPERA TION © 2004 Alamo Group Inc. LUMBERJACK 60/72 HEA VY -DUTY TREE CUTTERS OPERA TION INSTRUCTIONS (1) OPERA TOR REQUIREMENTS..................................................................................................... ......4-4 (2) TRACT OR REQUIREMENTS..................................... ...
-
Servis-Rhino 60/72 - page 77
OPERA TION LJ60/72 02-02 Operation Section 4-3 OPERA TION © 2004 Alamo Group Inc. Si no lee Ingles, pida ayuda a alguien que si lo lea para que le traduzca las medias de seguridad . (SG-3 ) !LEA EL INSTRUCTIVO! PELIGRO! READ, UNDERST AND, and FOLLOW the following Safety Messages. Serious injury or death may occur unless care is t aken to follow th ...
-
Servis-Rhino 60/72 - page 78
OPERA TION LJ60/72 02-02 Operation Section 4-4 OPERA TION © 2004 Alamo Group Inc. 1. OPERA T OR REQUIREMENTS Safe operation of the Rhino Lumberjack 60 and Lumberjack 72 (LJ60/72) Heavy-Duty T ree Cutter is the responsibility of a qualified operator . A qualified operator has read and understands both the cutter and tractor Operator Manuals and is ...
-
Servis-Rhino 60/72 - page 79
OPERA TION LJ60/72 02-02 Operation Section 4-5 OPERA TION © 2004 Alamo Group Inc. 2.1 ROPS and Seat Belt A Roll-Over-Protective-S tructure (ROPS) and seat belt are essential to protect the operator from falling off the tractor , especially during a roll over where the driver could be crushed and killed. The ROPS and seat belt must be used in conju ...
-
Servis-Rhino 60/72 - page 80
OPERA TION LJ60/72 02-02 Operation Section 4-6 OPERA TION © 2004 Alamo Group Inc. 2.5 Front End W eight A minimum of 20% total tractor weight must be maintained on the tractor front end when the cutter is in the raised position. Proper weight on the tractor front end is critical to maintain steering control and to prevent the tractor from rearing ...
-
Servis-Rhino 60/72 - page 81
OPERA TION LJ60/72 02-02 Operation Section 4-7 OPERA TION © 2004 Alamo Group Inc. 2.6 Power T ake Off (PT O) Depending on the equipped gearbox, LJ60/72 cutters are designed to operate at either 540 or 1000 rpm. Most tractors operate at either 540, or a combination of 540 and 1000 rpm PTO speeds. The speed of the tractor PTO can be determined by th ...
-
Servis-Rhino 60/72 - page 82
OPERA TION LJ60/72 02-02 Operation Section 4-8 OPERA TION © 2004 Alamo Group Inc. Use both hands and equipped handrails and steps for support when getting on the tractor . Never use tractor control levers for support when mounting the tractor . Always seat yourself in the operator ’s seat and fasten the seatbelt. Only operate the tractor and cut ...
-
Servis-Rhino 60/72 - page 83
OPERA TION LJ60/72 02-02 Operation Section 4-9 OPERA TION © 2004 Alamo Group Inc. 4. ST ARTING THE TRACT OR Before starting the tractor ensure the following: " Conduct all pre-start operation inspection and service according to the tractor operator’s manual. " All guards and safety devices are securely in place. " The parking brak ...
-
Servis-Rhino 60/72 - page 84
OPERA TION LJ60/72 02-02 Operation Section 4-10 OPERA TION © 2004 Alamo Group Inc. 5. CONNECTING THE CUTTER T O THE TRACT OR Use extreme caution when connecting the cutter to the tractor . The cutter should be securely resting at ground level or setting securely on blocks. Keep hands and feet from under cutter deck and clear of pinch points betwee ...
-
Servis-Rhino 60/72 - page 85
OPERA TION LJ60/72 02-02 Operation Section 4-11 OPERA TION © 2004 Alamo Group Inc. Properly setting the cutter height is essential for efficient and safe operation. A properly set cutter will make a more uniform cut, distribute clippings more evenly , require minimal tractor work, and follow the contour of uneven terrain. Note: Avoid very low cutt ...
-
Servis-Rhino 60/72 - page 86
OPERA TION LJ60/72 02-02 Operation Section 4-12 OPERA TION © 2004 Alamo Group Inc. The driveline yoke and tractor PTO shaft must be dirt free and greased for attachment. T o attach the driveline, loosen the driveline yoke clamping cone with a 1 1/16” (17mm) wrench and remove the cone from yoke. Slide yoke onto output shaft and align hole for con ...
-
Servis-Rhino 60/72 - page 87
OPERA TION LJ60/72 02-02 Operation Section 4-13 OPERA TION © 2004 Alamo Group Inc. When fitting the cutter to the tractor , the telescoping driveline must be inspected to ensure that at its most compressed position, the profiles do not “bottom out”, and when at its farthest extended position, there is sufficient engagement between the profiles ...
-
Servis-Rhino 60/72 - page 88
OPERA TION LJ60/72 02-02 Operation Section 4-14 OPERA TION © 2004 Alamo Group Inc. Engagement Check Procedure 1. With the driveline attached, raise and lower the cutter within its operating range. Position the mower at the point where the telescoping driveline is at its maximum extension. Turn of f the tractor and apply the parking brake. Securely ...
-
Servis-Rhino 60/72 - page 89
OPERA TION LJ60/72 02-02 Operation Section 4-15 OPERA TION © 2004 Alamo Group Inc. Refer to the tractor operator’s manual to ensure a complete pre-operation inspection and scheduled service is performed according to manufacturer recommendations. The following is a partial list of items requiring inspection: " T ire condition/air pressure &q ...
-
Servis-Rhino 60/72 - page 90
OPERA TION LJ60/72 02-02 Operation Section 4-16 OPERA TION © 2004 Alamo Group Inc. " Ensure the tailwheel beam position support bolts are properly installed and tightened. " Inspect all bolts and screws and tighten to the recommended torque. " Ensure chain guards and rubber deflectors are in position and not damaged. Replace worn, b ...
-
Servis-Rhino 60/72 - page 91
OPERA TION LJ60/72 02-02 Operation Section 4-17 OPERA TION © 2004 Alamo Group Inc. " Inspect blades and blade bolts for looseness and excessive wear . Make sure the cutter is securely blocked up before crawling beneath. Replace damaged, worn and missing blades as complete sets to maintain rot ary balance during operation. " Ensure blade ...
-
Servis-Rhino 60/72 - page 92
OPERA TION LJ60/72 02-02 Operation Section 4-18 OPERA TION © 2004 Alamo Group Inc. 9. DRIVING THE TRACT OR AND CUTTER Safe tractor transport requires the operator possess a thorough knowledge of the model being operated and precautions to take while driving with an attached implement. Ensure the tractor has the cap acity to handle the weight of th ...
-
Servis-Rhino 60/72 - page 93
OPERA TION LJ60/72 02-02 Operation Section 4-19 OPERA TION © 2004 Alamo Group Inc. 9.1 S t arting the T ractor The procedure to start the tractor is model specific. Refer to the tractor operator ’s manual for starting procedures for your particular tractor . Consult an authorized dealer if the starting procedure is unclear . Ensure the 3-point c ...
-
Servis-Rhino 60/72 - page 94
OPERA TION LJ60/72 02-02 Operation Section 4-20 OPERA TION © 2004 Alamo Group Inc. S tart off driving at a slow speed and gradually increase your speed while maint aining complete control of the tractor and cutter . Moving slowly at first will also prevent the tractor from rearing up and loss of steering control. The tractor should never be operat ...
-
Servis-Rhino 60/72 - page 95
OPERA TION LJ60/72 02-02 Operation Section 4-21 OPERA TION © 2004 Alamo Group Inc. T o avoid overturns, drive the tractor with care and at safe speeds, especially when operating over rough ground, crossing ditches or slopes, and turning corners. T ractor wheel tread spacing should be increased when working on inclines or rough ground to reduce the ...
-
Servis-Rhino 60/72 - page 96
OPERA TION LJ60/72 02-02 Operation Section 4-22 OPERA TION © 2004 Alamo Group Inc. 10. OPERA TING THE TRACT OR AND CUTTER Before starting any cutting operation, the operator must become familiar with the area to be cut and any obst acles and hazards contained within to ensure safety to the operator , bystanders, and equipment. S pecial attention s ...
-
Servis-Rhino 60/72 - page 97
OPERA TION LJ60/72 02-02 Operation Section 4-23 OPERA TION © 2004 Alamo Group Inc. 10.2 Byst ander/Passersby Precautions If a bystander comes within 100 yards of the tractor while the cutter is being operated, stop the tractor at once, idle the engine and disengage the PTO. Do not engage the PTO again until all bystanders are well past the 100 yar ...
-
Servis-Rhino 60/72 - page 98
OPERA TION LJ60/72 02-02 Operation Section 4-24 OPERA TION © 2004 Alamo Group Inc. 10.4 PT O RPM and Ground S peed Ground speed is achieved by transmission gear selection and not by the engine operating speed. The operator may be required to experiment with several gear range combinations to determine the best gear and range which provides the mos ...
-
Servis-Rhino 60/72 - page 99
OPERA TION LJ60/72 02-02 Operation Section 4-25 OPERA TION © 2004 Alamo Group Inc. The cutter is designed to cut vegetative material up to 6” in diameter . The tractor and cutter can be operated by driving across growth that a properly rated tractor can safely pass over . This includes grass, brush, small trees and other type of growth up to abo ...
-
Servis-Rhino 60/72 - page 100
OPERA TION LJ60/72 02-02 Operation Section 4-26 OPERA TION © 2004 Alamo Group Inc. Then lower the cutting height of the cutter and cut the vegetation a second time. If possible, select a cutting pattern that is at a 90 degree angle to the first p ass to reduce streaking and provide a more even cut. Large, dense, or wet vegetation may need to be cu ...
-
Servis-Rhino 60/72 - page 101
OPERA TION LJ60/72 02-02 Operation Section 4-27 OPERA TION © 2004 Alamo Group Inc. Do not cut, or drive the tractor into, material that is burning, or areas that recently burnt and may contain hot spots. Burning material, sparks, and coals could be thrown from the cutter to areas of veget ation that might ignite. T ire damage can occur when drivin ...
-
Servis-Rhino 60/72 - page 102
OPERA TION LJ60/72 02-02 Operation Section 4-28 OPERA TION © 2004 Alamo Group Inc. After disconnecting the 3 lift point s, remove the cutter driveline from the tractor PTO shaf t by removing the yoke clamping cone with a 1 1/16” (17mm) wrench and pulling the driveline yoke off the PTO shaf t. If the connecting cone cannot be removed by hand, dri ...
-
Servis-Rhino 60/72 - page 103
OPERA TION LJ60/72 02-02 Operation Section 4-29 OPERA TION © 2004 Alamo Group Inc. 12. CUTTER ST ORAGE Properly preparing and storing the cutter at the end of the season is critical to maint aining its appearance and to help ensure years of dependable service. The following are suggested storage procedures: It is critical that the driveline clutch ...
-
Servis-Rhino 60/72 - page 104
OPERA TION LJ60/72 02-02 Operation Section 4-30 OPERA TION © 2004 Alamo Group Inc. 13. TRANSPORTING THE TRACT OR AND CUTTER Before transporting the tractor and cutter, idle the tractor engine, disengage the PTO and wait for all cutter moving part s to come to a complete stop. Once all cutter parts are completely stopped, raise the cutter to transp ...
-
Servis-Rhino 60/72 - page 105
OPERA TION LJ60/72 02-02 Operation Section 4-31 OPERA TION © 2004 Alamo Group Inc. 13.1 T ransporting on Public Roadways Before transporting the tractor on a public roadway or boarding a trailer for transport, the tractor brake pedals should be locked together . Locking the pedals ensures that both wheels brake simultaneously while stopping, espec ...
-
Servis-Rhino 60/72 - page 106
OPERA TION LJ60/72 02-02 Operation Section 4-32 OPERA TION © 2004 Alamo Group Inc. Make sure that all tractor flashing warning lights, headlights, and brake/t aillights are functioning properly before proceeding onto public roads. While newer model tractors have plenty of lighting to provide warning signals as well as artificial operating lighting ...
-
Servis-Rhino 60/72 - page 107
OPERA TION LJ60/72 02-02 Operation Section 4-33 OPERA TION © 2004 Alamo Group Inc. 13.2 Hauling the T ractor and Cutter Before transporting a loaded tractor and cutter , measure the height and width dimensions and gross weight of the complete loaded unit. Ensure that the load will be in compliance with the legal limits set for the areas that will ...
-
Servis-Rhino 60/72 - page 108
OPERA TION LJ60/72 02-02 Operation Section 4-34 OPERA TION © 2004 Alamo Group Inc. TROUBLESHOOTING PROBLEM POSSIBLE CAUSE REMEDY NOT CUTTING CLEAN Blades dull. Sharpen or replace Blades. Blade rotation incorrect. Use correct Blade for Carrier. Carrier RPM too low. Increase PTO speed. Mower not leveled. Adjust machine level Ground speed too fast. R ...
-
Servis-Rhino 60/72 - page 109
OPERA TION LJ60/72 02-02 Operation Section 4-35 OPERA TION © 2004 Alamo Group Inc. TROUBLESHOOTING (Continued) PROBLEM POSSIBLE CAUSE REMEDY BROKEN CROSS OR Load too high for joint. Use protective device with joint. CUPS Check joint angles and phasing. Slow down or raise Cutter. END GALLING OF Speed too high. Operate at proper speed (540 or 1000 r ...
-
Servis-Rhino 60/72 - page 110
OPERA TION LJ60/72 02-02 Operation Section 4-36 OPERA TION © 2004 Alamo Group Inc. TROUBLESHOOTING (Continued) PROBLEM POSSIBLE CAUSE REMEDY GEARBOX Damaged Oil Seal. Replace Seal. LEAKING No Oil Seal. Install Oil Seal. Oil too light. Use EP140. Bent Shaft. Replace Oil Seal and Shaft. Oil Seal race rough. Replace Shaft or repair Race. Oil Seal ins ...
-
Servis-Rhino 60/72 - page 111
MAINTENANCE SECTION Maintenance Section 5-1 ...
-
Servis-Rhino 60/72 - page 112
MAINTENANCE Maintenance Section 5-2 LJ60/72 02-02 © 2004 Alamo Group Inc. MAINTENANCE Before operating your Rotary Cutter, make sure it is properly lubricated and thoroughly inspected. Only a minimum of time and effort is required to regularly lubricate and maintain this machine to provide long life and trouble free operation. WARNING! Always dise ...
-
Servis-Rhino 60/72 - page 113
Maintenance Section 5-3 MAINTENANCE LJ60/72 02-02 © 2004 Alamo Group Inc. MAINTENANCE FIGURE 3. Tail Wheel Bearing Lubrication FIGURE 4. Tail Wheel Beam Lubrication Required lubricant is a NLGI000 Grease (P/N 00769030) EP additives for extreme pressure and temperature. NOTE: Overfilling the Gearbox will cause pressure to build up and cause Oil Sea ...
-
Servis-Rhino 60/72 - page 114
MAINTENANCE Maintenance Section 5-4 LJ60/72 02-02 © 2004 Alamo Group Inc. MAINTENANCE DRIVELINE LUBRICATION Grease Fittings are located on the Cross Assembly of each U-Joint and on the telescoping tubes. Grease the U- Joint after each 8 hours of use. Figure 5. Grease the telescoping tubes after every 8 hours use. Some PTO-to- Hitch connections may ...
-
Servis-Rhino 60/72 - page 115
Maintenance Section 5-5 MAINTENANCE LJ60/72 02-02 © 2004 Alamo Group Inc. MAINTENANCE MAIN DRIVELINE & CAT 4 SAFETY SHIELD To remove the main inner driveline shield, Remove the locking screws. Align the bearing tabs with the cone pockets. FIGURE 7. Remove the half-guard and remove the bearing ring. FIGURE 8. FIGURE 7 FIGURE 8 Inspect the drive ...
-
Servis-Rhino 60/72 - page 116
MAINTENANCE Maintenance Section 5-6 LJ60/72 02-02 © 2004 Alamo Group Inc. MAINTENANCE BLADE SERVICING Inspect blades before each use to determine that they are properly installed and in good condition. Replace any blade that is bent, excessively nicked, worn, or has any other damage. Small nicks can be ground out when sharpening. IMPORTANT! When s ...
-
Servis-Rhino 60/72 - page 117
Maintenance Section 5-7 MAINTENANCE LJ60/72 02-02 © 2004 Alamo Group Inc. MAINTENANCE BLADE CARRIER REMOVAL/INSTALLATION Move cutter and tractor to a solid level surface (concrete slab of pavement). Raise cutter approximately 12" and securely block at this height. Remove blades before removing carrier to maintain carrier balance. To remove th ...
-
Servis-Rhino 60/72 - page 118
MAINTENANCE Maintenance Section 5-8 LJ60/72 02-02 © 2004 Alamo Group Inc. MAINTENANCE SEASONAL CLUTCH MAINTENANCE It is important that the clutches slip when an obstacle or load heavier than the clutch setting is encountered. Therefore, if the machine sits outside longer than 30 days and is exposed to rain and/or humid air it is important to make ...
-
Servis-Rhino 60/72 - page 119
Maintenance Section 5-9 MAINTENANCE LJ60/72 02-02 © 2004 Alamo Group Inc. MAINTENANCE FIGURE 14 7 2 3 6 1 29,30,31 28 27 26 25 24 19 18 17 16 15 14 13 12 11 10 9 8 23 20,21,22 ITEM QTY DESCRIPTION 1 1 Casing 2 1 Bearing, Lower Output 3 1 Seal, Lower Output 6 1 Nut, Slotted 7 1 Cotter Pin 8 1 Shaft, Output 9 1 Gear, Output 10 1 Nut, Slotted 11 1 Co ...
-
Servis-Rhino 60/72 - page 120
MAINTENANCE Maintenance Section 5-10 LJ60/72 02-02 © 2004 Alamo Group Inc. MAINTENANCE RIGHT ANGLE GEARBOX (OUTBOARD) ASSEMBLY & DISASSEMBLY PROCEDURES INPUT SHAFT REMOVAL Step 1. Place Gearbox on appropriate work surface. Step 2. Remove Vent Plug (item #16) or Complete Top Cover (item #18) Step 3. Turn Gearbox upside doan allowing Oil to drai ...
-
Servis-Rhino 60/72 - page 121
Maintenance Section 5-11 MAINTENANCE LJ60/72 02-02 © 2004 Alamo Group Inc. MAINTENANCE OUTPUT SHAFT INSTALLATION Step 1. Install Upper Output Shaft Bearing Cup (item # 12) into Main Housing from the top, Install Output Shaft Lower Bearing Cup (item # 2) into Main Housing (item # 1) from the bottom, Make sure both Bearing Cup are seated firmly agai ...
-
Servis-Rhino 60/72 - page 122
MAINTENANCE Maintenance Section 5-12 LJ60/72 02-02 © 2004 Alamo Group Inc. MAINTENANCE STORAGE Your rotary cutter represents an investment from which you should get the greatest possible benefit. Therefore, when the season is over, the cutter should be thoroughly checked and prepared for storage so that a minimum amount of work will be required to ...
-
Servis-Rhino 60/72 - page 123
701-SRW.PM4-92 SER VIS-RHINO LIMITED WARRANTY 1. LIMITED WARRANTIES 1.01. Servis-Rhino warrants for one year from the purchase date to the original non-commercial, governmental, or municipal purchaser (“Purchaser”) and warrants for six months to the original commercial or industrial purchaser (“Purchaser”) that the goods purchased are free ...
-
Servis-Rhino 60/72 - page 124
...
-
Servis-Rhino 60/72 - page 125
T O THE OWNER/OPERA T OR/DEALER To keep your implement running efficiently and safely, read your manual thoroughly and follow these directions and the Safety Messages in this Manual. The Table of Contents clearly identifies each section where you can easily find the information you need. The OCCUPATIONAL SAFETY AND HEALTH ACT (1928.51 Subpart C) ma ...
-
Servis-Rhino 60/72 - page 126
LJ60/72-SOM - 02/02 P/N 00772058C Printed U.S.A. TREE CUTTER LUMBERJACK 60/72 ...
-
Servis-Rhino 60/72 - page 127
SERVIS-RHINO ® 1020 S. Sangamon Ave. Gibson City, IL 60936-9907 Please fold (do not tear), tape, and drop in any mailbox. PLEASE FILL OUT OWNER W ARRANTY REGISTRA TION INFORMA TION SIGN, AND DROP LAST COPY IN ANY MAILBOX. IMPOR T ANT! T O PLACE THIS W ARRANTY IN EFFECT , THIS W ARRANTY REGISTRA TION MUST BE FILLED OUT , SIGNED, AND MAILED WITHIN 3 ...
-
Servis-Rhino 60/72 - page 128
• I have informed the Purchaser of this product of W arranty terms, provisions, and procedures that are applicable, reviewed the contents of the Operator ’ s Manual including safety equipment, safe operation, and maintenance, reviewed the Safety Signs on implement (and tractor if possible), shown the AEM Mower Safety Practices V ideo, and revie ...
-
Servis-Rhino 60/72 - page 129
...
-
Servis-Rhino 60/72 - page 130
• I have informed the Purchaser of this product of W arranty terms, provisions, and procedures that are applicable, reviewed the contents of the Operator ’ s Manual including safety equipment, safe operation, and maintenance, reviewed the Safety Signs on implement (and tractor if possible), shown the AEM Mower Safety Practices V ideo, and revie ...
-
Servis-Rhino 60/72 - page 131
...
-
Servis-Rhino 60/72 - page 132
• I have informed the Purchaser of this product of W arranty terms, provisions, and procedures that are applicable, reviewed the contents of the Operator ’ s Manual including safety equipment, safe operation, and maintenance, reviewed the Safety Signs on implement (and tractor if possible), shown the AEM Mower Safety Practices V ideo, and revie ...
Do you have a question concerning Servis-Rhino 60/72?
Use the form below
If you did not solve your problem by using a manual Servis-Rhino 60/72, ask a question using the form below. If a user had a similar problem with Servis-Rhino 60/72 it is likely that he will want to share the way to solve it.