Manual HSU VTF-2

12 pages 2.33 mb
Download

Go to site of 12

Summary
  • HSU VTF-2 - page 1

    Features V ariable T uning T echnology . “Now you decide how deep to play .” The large flared ports can be re-tuned with the flip of a switch and the removal of a port plug. In Maximum Output mode, the subwoofer transforms into a dif ferent device capable of playing louder material with less distortion at the expense of some deeper bass. Custom ...

  • HSU VTF-2 - page 2

    The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’ s enclosure that m ay be of sufficient magnitude to constitute a risk of electric shock to persons. Le symbole éclair avec point de flèche à l’intérieur d’un tria ...

  • HSU VTF-2 - page 3

    Step 1: Unpac king If your room does not have carpeting, unpack the subwoofer on a throw rug or piece of carpeting to avoid unwanted scuffing or scratching. If the subwoofer is too heavy , please ask for assistance. Find the top of the box and open it. Holding the flaps open, roll the box over until it is upside-down. Lift the box off. Stop for a m ...

  • HSU VTF-2 - page 4

    Step 3: Hookup We will refer to receivers, integrated amplifiers, and preamps as contr ollers . T ake a look at the back of your controller . The output connectors available determine the best method of hooking up your subwoofer . Method A. Connecting to controllers with a SUBWOOFER or LFE output If you have this, you s hould use it. A ll D olby D ...

  • HSU VTF-2 - page 5

    Step 6: Fine T uning Now that the basic setup is complete, it’ s time for optimization. Mark down the current volume and crossover settings with a soft pencil so you can go back to where you started. V ariable T uning If you don’t like the air shaking feeling of very deep bass, or if you often listen to extremely loud chest-thumping material t ...

  • HSU VTF-2 - page 6

    6 V olume fine tuning For the most precise integration with your main speakers, go through test tones with a SPL meter . Setting the level using test tones by ear may result in misconfiguration, so please use a meter.A n analogue Radio Shack SPL m eter is inexpensive and works better for this application than the digital Radio Shack SPL meter . It ...

  • HSU VTF-2 - page 7

    • Disconnect all interconnects from the amplifier . If still hums, contact your dealer or call/email technical support. • It is possible that some cables have a poor or broken ground due to poor construction, oxidation, or damage . Also, poorly shielded cables can potentially pick up noise. Tr y another interconnect or speaker wire. Also, move ...

  • HSU VTF-2 - page 8

    8 Repair If your unit needs service, please re-review the troubleshooting section first. Contact your dealer or call tech support at 1-800-554-0150 9am to 5pm Pacific time, Monday through Friday . We w ill try and respond to emails sent to techsupport@hsuresearch.com within two business days. Pr oblem Cause Solution • Recheck the connections betw ...

  • HSU VTF-2 - page 9

    Specifications Frequency Response +/- 1 dB 25 Hz 20 Hz (Max. Extension Mode) Frequency Response 32 Hz 25 Hz (Max. Output Mode) W oofer Size 10 inches 12 inches Amplifier Po wer Rating (RMS) 250 Wa tts 350 Wa tts P eak/Shor t T erm Po wer 1000 Wa tts 1400 Wa tts Crosso ver Frequency Range 30-90 Hz, bypassable 30-90 Hz, bypassable Crosso ver Slope 24 ...

  • HSU VTF-2 - page 10

    10 Notes ...

  • HSU VTF-2 - page 11

    11 Notes ...

  • HSU VTF-2 - page 12

    12 HSU Research 3160 E. La Palma Avenue #D Anaheim, CA 92806 800-554-0150 HSURESEARCH.COM ...

Manufacturer HSU Category Speaker

Documents that we receive from a manufacturer of a HSU VTF-2 can be divided into several groups. They are, among others:
- HSU technical drawings
- VTF-2 manuals
- HSU product data sheets
- information booklets
- or energy labels HSU VTF-2
All of them are important, but the most important information from the point of view of use of the device are in the user manual HSU VTF-2.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals HSU VTF-2, service manual, brief instructions and user manuals HSU VTF-2. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product HSU VTF-2.

Similar manuals

A complete manual for the device HSU VTF-2, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use HSU VTF-2 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of HSU VTF-2.

A complete HSU manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual HSU VTF-2 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the HSU VTF-2, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the HSU VTF-2, that we can find in the current document
3. Tips how to use the basic functions of the device HSU VTF-2 - which should help us in our first steps of using HSU VTF-2
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with HSU VTF-2
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of HSU VTF-2 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning HSU VTF-2?

Use the form below

If you did not solve your problem by using a manual HSU VTF-2, ask a question using the form below. If a user had a similar problem with HSU VTF-2 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)