Manual Zanussi ZT 415

20 pages 0.36 mb
Download

Go to site of 20

Summary
  • Zanussi ZT 415 - page 1

    INSTRUCTION BOOKLET DISHW ASHER ZT 415 ...

  • Zanussi ZT 415 - page 2

    PID20GB 2 CONTENTS W arnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 4 Positioning, l ...

  • Zanussi ZT 415 - page 3

    Installation ■ This appliance is heavy . Care should be taken when moving it. ■ It is dangerous to alter the specifications or attempt to modify this product in any way . ■ Care must be taken to ensure that the appliance does not stand on the electrical supply cable. ■ Any electrical work required to install this appliance should be carried ...

  • Zanussi ZT 415 - page 4

    Remove all packaging before positioning the machine. Positioning If possible, position the machine next to a water tap and a drain. The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation . Levelling Good levelling is essential for correct closure and sealing of the door . When the a ...

  • Zanussi ZT 415 - page 5

    The electrical connections W ARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed. If the plug that is fitted to your appliance is not suitable for your socket outlet, it must be cut off and the appropriate plug fitted. Remove the fuse from the cut off plug. The cut off plug shou ...

  • Zanussi ZT 415 - page 6

    THE CONTROLS In this fully integrated appliance the controls are located on the top of the door . When selecting a programme, the door needs to be partially opened. Audible signals have been introduced to help indicate which operations the dishwasher is performing. Short «instruction accepted» signal When any of the buttons are pressed: a short a ...

  • Zanussi ZT 415 - page 7

    P AA12GB 7 SALE SAL T SALZ SEL SR06 AA02 The W ater Softener W ater contains varying amounts of lime and mineral salts depending on the area in which you live: these are deposited on the dishes leaving white marks. The higher the content of these salts, the harder your water will be. The «hardness» level is measured on 2 equivalent scales: Clarke ...

  • Zanussi ZT 415 - page 8

    Rinse Aid The use of this liquid ensures thorough rinsing, spot and streak free drying, making the water run quickly off the dishes for sparkling results. It is automatically added during the hot rinse. The dispenser , which is positioned inside the door , holds about 1 10 ml of rinse aid, which is sufficient for 16-40 dishwashing programmes, depen ...

  • Zanussi ZT 415 - page 9

    PCE12GB 9 Loading your Machine Before placing dishes in the machine, remove any scraps of food from the plates (small bones, toothpicks, fish bones, scraps of meat and vegetables, fruit skins etc.) to avoid clogging the filters and consequently reducing performance. Open the door and slide out the baskets to load the dishes. Use of the Lower Basket ...

  • Zanussi ZT 415 - page 10

    PCL12GB 10 Adjusting the Height of the Upper Basket If washing very large plates (over 27 cm and up to 31 cm in diameter) you can load them in the lower basket after moving the upper basket to the higher position as follows: Move the front runner stops (A) of the upper basket out- ward and slide the basket out. Refit the basket in the higher positi ...

  • Zanussi ZT 415 - page 11

    W ASHING PROGRAMMES PTP18GB 11 Programme T ype of load and degree of soil Heavily soiled crockery , pots, pans and cutlery INTENSIVE 70°c Required pushbuttons Cycle description Recommended quantity of detergent in the dispenser on the dispenser lid Prewash at 55°C Main wash at 70°C 2 cold rinses 1 hot rinse at 65°C Hot air drying Normally soile ...

  • Zanussi ZT 415 - page 12

    1 Check that the filters are clean (see cleaning instructions) 2 Switch on the appliance at the mains supply . 3 Check that there is salt and rinse aid 4 Load the dishes Remove any scraps of food. Pull the lower basket out and arrange the saucepans, plates and cutlery in it. Pull the upper basket out and arrange the plates, saucers, glasses and cup ...

  • Zanussi ZT 415 - page 13

    13 MAINTENANCE AND CLEANING PMA08GB Cleaning the Central Filters (After each wash) Inspect the central filters (B) and (C) and remove any scraps of food with a brush, under running water . Filters (B) and (C) are both removed by lifting up the outer one (B) (pulling the central funnel upwards); the smaller filter (C) can then be removed by pressing ...

  • Zanussi ZT 415 - page 14

    Certain problems are often due to lack of simple maintenance or oversights and can be solved easily without having to call out an engineer . If the machine will not start ■ The door has not been properly closed. ■ The plug is not properly inserted in the power socket. ■ There is no current at the socket. Check the fuse. This dishwasher may di ...

  • Zanussi ZT 415 - page 15

    The dishes are not quite dry ■ The dishes have been left too long inside the machine. The door is difficult to close ■ The dishwasher is not level or is not properly built-in. If, after the above checks, the fault persists, call your local Zanussi Service Centre, whose address can be found in the accompanying Customer Care Booklet, and can also ...

  • Zanussi ZT 415 - page 16

    16 BUILDING-IN PII05GB Building-in features This dishwasher is designed to be fitted under a kitchen counter or sink. In either case, it is essential that the recess dimensions indicated in the picture are followed. No further openings for venting of the dishwasher are required, but only to let the water fill and drain hoses and power supply cable ...

  • Zanussi ZT 415 - page 17

    17 PII06GB Securing under a counter Secure the dishwasher to the counter on the front part by means of two 4,2x13 screws provided (see fig. - point A). Important! The dishwasher must be secured against tilting. Therefore, make sure that the counter it is fitted under , is suitably secured to a fixed structure (adjacent kitchen cabinets, wall). Atte ...

  • Zanussi ZT 415 - page 18

    Zanussi guarantee conditions This guarantee is in addition to your statutory and other legal rights. We, Zanussi Ltd., undertake that if, within twentyfour months of the date of the purchase, this ZANUSSI appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option, repair or repl ...

  • Zanussi ZT 415 - page 19

    ...

  • Zanussi ZT 415 - page 20

    152995 81/0 T otal Chlorine free GB Printed in Italy 0/1096 ...

Manufacturer Zanussi Category Dishwasher

Documents that we receive from a manufacturer of a Zanussi ZT 415 can be divided into several groups. They are, among others:
- Zanussi technical drawings
- ZT 415 manuals
- Zanussi product data sheets
- information booklets
- or energy labels Zanussi ZT 415
All of them are important, but the most important information from the point of view of use of the device are in the user manual Zanussi ZT 415.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Zanussi ZT 415, service manual, brief instructions and user manuals Zanussi ZT 415. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Zanussi ZT 415.

Similar manuals

A complete manual for the device Zanussi ZT 415, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Zanussi ZT 415 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Zanussi ZT 415.

A complete Zanussi manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Zanussi ZT 415 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Zanussi ZT 415, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Zanussi ZT 415, that we can find in the current document
3. Tips how to use the basic functions of the device Zanussi ZT 415 - which should help us in our first steps of using Zanussi ZT 415
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Zanussi ZT 415
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Zanussi ZT 415 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Zanussi ZT 415?

Use the form below

If you did not solve your problem by using a manual Zanussi ZT 415, ask a question using the form below. If a user had a similar problem with Zanussi ZT 415 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)