English dropdown-ico

Manual Marvel Industries 80RD

12 pages 0.39 mb
Download

Go to site of 12

Summary
  • Marvel Industries 80RD - page 1

    Marvel 80RD Inst allation Operation & Maintenance Instructions ...

  • Marvel Industries 80RD - page 2

    Remove Packaging Y our drawer refrigerator has been packed for ship- ment with all parts that could be damaged by movement securely fastened. Before installing the drawer refrigerator , be sure all packing materials and tape have been removed. Important Save the carton packaging until your drawer refrigerator has been thoroughly inspected and found ...

  • Marvel Industries 80RD - page 3

    Select Location The proper location will ensure peak perform- ance of your drawer refrigerator . Choose a loca- tion away from heat and out of direct sunlight. Best performance will be maintained when installed within the following parameters: Cabinet Clearance V entilation is required for the bottom front section of the unit where the grille is lo ...

  • Marvel Industries 80RD - page 4

    Control Panel The temperature of your drawer unit ranges from 32°F to 47°F (0°C to 8°C). The temperature can be adjusted using the control panel located on the inside of the top drawer . T o change the tempera- ture setting, press the warmer or cooler pads until the display shows the desired temperature. After a few seconds the display will ret ...

  • Marvel Industries 80RD - page 5

    CARE AND CLEANING OF YOUR DRA WER REFRIGERA T OR Condenser The condenser tubing inside the cabinet does not require frequent cleaning; however , satisfactory cooling depends on adequate ventilation over the coils. Be sure that nothing obstructs the required air flow openings in front of the cabinet. At least once or twice a year brush or vacuum lin ...

  • Marvel Industries 80RD - page 6

    FULL OVERLA Y P ANEL INST ALLA TION INSTRUCTIONS 6 Pilot Hole Drill Sizes for Wood Screws Wood Screw Size Hardwood Softwood Work Material 8 3/32 5/64 5/16 PHILLIPS HEAD SCREWS HOLDING DRA WER FRONT GASKET Step 2: Remove Drawer Fronts (Note: The overlay panel may be installed without removing the drawer fronts from the drawer bod- ies, but the full ...

  • Marvel Industries 80RD - page 7

    Step 3: Sizing the Overlay Panel Step 4: Attaching the Overlay Panel to the Door 1. Set overlay panel on drawer front face and align edges. Clamp panel in position and mark pilot hole locations. See step 3 for nominal size and hole locations. Drill pilot holes (remove panel if necessary , re-align and re-clamp overlay to drawer face). 2. Insert woo ...

  • Marvel Industries 80RD - page 8

    TROUBLESHOOTING POSSIBLE CAUSE • Unit interior needs cleaned. • Unit not level. • Unit not level. • Weak floor . • LED light burned out. • No power at outlet. • Control Panel turned “OFF”. • Line Cord not plugged into power source. • House fuse blown. • Prolonged door openings. • Control Panel set too cold. • Condenser n ...

  • Marvel Industries 80RD - page 9

    Before Calling for Service Before calling for service, check the following items: • Make sure unit is plugged into outlet. • Check the outlet for power . T est outlet with lamp to make certain outlet has power . • Make sure drawer refrigerator is “ON”. Dis- play will show . • Make certain unit is level from front to back and side to sid ...

  • Marvel Industries 80RD - page 10

    Entire Product Limited One Y ear Parts and Labor Warranty Marvel warrants that it will supply all necessary parts and labor to repair or replace in the end user's home or office, any component which proves to be defective in material or workmanship, subject to the condition and exclusions stated below , for a period of one year from the date o ...

  • Marvel Industries 80RD - page 11

    NOTES 11 ...

  • Marvel Industries 80RD - page 12

    41009146A WWW .MAR VELINDUSTRIES.COM Phone: (765) 962-2521 Fax: (765) 962-2493 MAR VEL INDUSTRIES 233 Industrial Parkway P .O. Box 997 Richmond, IN 47375-0997 ...

Manufacturer Marvel Industries Category Refrigerator

Documents that we receive from a manufacturer of a Marvel Industries 80RD can be divided into several groups. They are, among others:
- Marvel Industries technical drawings
- 80RD manuals
- Marvel Industries product data sheets
- information booklets
- or energy labels Marvel Industries 80RD
All of them are important, but the most important information from the point of view of use of the device are in the user manual Marvel Industries 80RD.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Marvel Industries 80RD, service manual, brief instructions and user manuals Marvel Industries 80RD. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Marvel Industries 80RD.

Similar manuals

A complete manual for the device Marvel Industries 80RD, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Marvel Industries 80RD by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Marvel Industries 80RD.

A complete Marvel Industries manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Marvel Industries 80RD - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Marvel Industries 80RD, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Marvel Industries 80RD, that we can find in the current document
3. Tips how to use the basic functions of the device Marvel Industries 80RD - which should help us in our first steps of using Marvel Industries 80RD
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Marvel Industries 80RD
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Marvel Industries 80RD in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Marvel Industries 80RD?

Use the form below

If you did not solve your problem by using a manual Marvel Industries 80RD, ask a question using the form below. If a user had a similar problem with Marvel Industries 80RD it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)