English dropdown-ico

Manual Athena Technologies 6050

15 pages 0.61 mb
Download

Go to site of 15

Summary
  • Athena Technologies 6050 - page 1

    Instruction Manual Athena 6050 Temperature Controllers -THENIL ...

  • Athena Technologies 6050 - page 2

    INSTRUCTION MANUAL SPECIFICATIONS: Inputs: Line Voltage Sensor Power Consumption Ranges Available Accuracy: Temperature Stability Cold end tracking Operating ambient for rated accuracy Maximum T/C lead resistance for rated accuracy Series mode noise rejection: Common mode noise rejection T/C break protection: Dual display: ATHENA 6050 Automatic Tun ...

  • Athena Technologies 6050 - page 3

    Display update rate: 5 times per second Filtering: Analog and digital filtering techniques increase stability of process and display. °F/°C: output: -B Relay (time proportioning) -F Current proportional -S Pulsed voltage -T Triac time proportional Filtered LED display: T/C linearization: Connections: Dimensions: Mounting: Weight: Internal switch ...

  • Athena Technologies 6050 - page 4

    3 ...

  • Athena Technologies 6050 - page 5

    FRONT PANEL AOJUSTMENTS Touch Key 1 Index: Allows the following adjustments to be selected. 1) Set point temperature O-14OO'F (760°C) O-2500°F (O-137O°C) 2) Heat cycle time 3) Prop. Band (indicated *1 to 120 seconds as gain) 0.25-25% of span 4) Rate with tracking reset **4-255 seconds 5) Auto Tune (AT) Up/Down keys: increases/decreases valu ...

  • Athena Technologies 6050 - page 6

    3. 4. Loss of power or turn-off during warm-up requires a re-start from ambient. Change of state processes, i.e. solid to liquid or liquid to gas, may introduce erroneous tuning parameters during process warm-up. 1. Accurately measures, linearizes and displays temperature in °F and °C. 2. Automatically calculates and displays parameters-heat gain ...

  • Athena Technologies 6050 - page 7

    ...

  • Athena Technologies 6050 - page 8

    Output Modules The Athena 6050 offers users field interchangeable output modules. This unique feature makes it possible to fill output requirements for a variety of applications with a single controller model. Module Type B: This 7A/5A relay (at 120/240 Vac) is used for driving resistive heaters. NOTE: Do not use this output module with mechanical ...

  • Athena Technologies 6050 - page 9

    INTERNAL SWITCHES Damping Control -To allow the controller to provide automatic tuning for processes with varying heating characteristics and with varying heating capabilities, the 6050 offers three damping choices: High damping: for over-powered heating systems, systems with multiple heat lags, and/or poor coupling between the heater and the tempe ...

  • Athena Technologies 6050 - page 10

    THERMOCOUPLE PLACEMENT Proper thermocouple placement can eliminate many problems in the system. The probe should be placed so that it can detect any temperature change with minimal thermal lag. In a process that requires fairly constant heat output, the probe should be placed close to the heater. In processes where the heat demand is variable, the ...

  • Athena Technologies 6050 - page 11

    OPERATING INSTRUCTIONS How to Start the automatic tuning procedure STEP 1: Energize the unit and proceed immediately to step 2. STEP 2: Place the unit on standby by holding the "Index" button until the "Autotune" LED lights then press the Cancel button. The unit is now ready for set point and cycle time entry. STEP 3: To enter a ...

  • Athena Technologies 6050 - page 12

    How to override automatic tuning parameters It is possible to set or fine tune three mode parameters manually on the 6050. To manually enter parameters: 1) Press "Index" button until the LED for the desired parameter lights. 2) Enter the new parameter using the up or down key. 3) Press the "enter" button. The new parameters will ...

  • Athena Technologies 6050 - page 13

    TROUBLE SHOOTING Front dark - no instrument power. Process display shows CCCC - Open thermcouple. Short terminals 1 and 2. Process display should indicate temperature at back of case. Repair or replace thermocouple. About Half or Twice Expected Reading - Check position of °C/°F switch. Short 1 and 2 to read room temperature. 22-30 is °C, 70-85 i ...

  • Athena Technologies 6050 - page 14

    WARRANTY This equipment is warranted to be free from defects of material and workmanship. It is sold subject to our mutual agreement that the liability of Athena Controls, Inc. is to replace and/or repair at its factory, provided the equipment is returned, transportation prepaid within (2) years of its purchase. The purchaser agrees that Athena Con ...

  • Athena Technologies 6050 - page 15

    dTHENd Controls, Inc., 5145 Campus Drive Plymouth Meeting, PA 19462 (215) 828-2490 ...

Manufacturer Athena Technologies Category Weather Radio

Documents that we receive from a manufacturer of a Athena Technologies 6050 can be divided into several groups. They are, among others:
- Athena Technologies technical drawings
- 6050 manuals
- Athena Technologies product data sheets
- information booklets
- or energy labels Athena Technologies 6050
All of them are important, but the most important information from the point of view of use of the device are in the user manual Athena Technologies 6050.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Athena Technologies 6050, service manual, brief instructions and user manuals Athena Technologies 6050. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Athena Technologies 6050.

Similar manuals

A complete manual for the device Athena Technologies 6050, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Athena Technologies 6050 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Athena Technologies 6050.

A complete Athena Technologies manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Athena Technologies 6050 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Athena Technologies 6050, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Athena Technologies 6050, that we can find in the current document
3. Tips how to use the basic functions of the device Athena Technologies 6050 - which should help us in our first steps of using Athena Technologies 6050
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Athena Technologies 6050
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Athena Technologies 6050 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Athena Technologies 6050?

Use the form below

If you did not solve your problem by using a manual Athena Technologies 6050, ask a question using the form below. If a user had a similar problem with Athena Technologies 6050 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)