English dropdown-ico

Manual Merco Savory C-40

12 pages 2.17 mb
Download

Go to site of 12

Summary
  • Merco Savory C-40 - page 1

    P ARTS & SER VICE for C-40VS/C-40 V ertical Conveyor T oaster 05-02kdl 07015 The C-40VS and C-40 are high volume conveyor toasters, constructed of brushed Stainless Steel. The C-40VS has a variable speed control enabling the toasting of not only bread, but English Muffins, bagels, as well as buns, with one p ass through the conveyor . S t andar ...

  • Merco Savory C-40 - page 2

    NOTE: The wiring harness must be disconnected from heating elements to remove insulation on right side. Hold terminals with pliers to prevent bending. (Figure #4) 3. Remove rear heating element. (Refer to Section D) 4. Remove wire guard. (Refer to Section O) 5. Remove two baskets from conveyor chain, then rotate the chain so that this opening is at ...

  • Merco Savory C-40 - page 3

    D Heater Unit Assembly Re- placement: (Refer to Figure #5) 1. Remove right panel. 2. Holding the heater connections with pliers to prevent bending, remove the three screws retaining the wiring harness on the heater connections of the unit being replaced. (Figure #4) 3. Remove insulation. 4. Remove the two screws holding heater element to inside pan ...

  • Merco Savory C-40 - page 4

    F Motor Replacement: (Refer to Figure 8, 9 & 9A) 1. Remove right side panel. 2. Disconnect motor lead wire from terminal block and conveyor speed control (and or P .C. board if your unit contains one). Or on-off switch on C-40 only units. 3. Remove two mounting bolts from under toaster that attach motor bracket. Slip off drive chain. 4. Lift ou ...

  • Merco Savory C-40 - page 5

    3. Loosen Allen screws on clutch sprocket and remove sprocket from motor shaft. 4. Install new sprocket on motor shaft and tighten screws. Check sprocket alignment (Figure #9). 5. Position chain on sprocket and slide motor to right to remove slack. Tighten mounting bolts. Check chain orientation. 6. Check chain tension (Figure #8) and adjust if nec ...

  • Merco Savory C-40 - page 6

    Transmission Bearing (Left side) 1. Remove left side panel. 2. Remove the two lock nuts holding bearing retainer and remove retainer . 3. Remove old bearing. 4. Install new bearing and seat in opening. 5. Replace retainer , nuts and left side panel. K Conveyor Chain Replace- ment: 1. Remove toast receiving tray , delivery chute, left and right side ...

  • Merco Savory C-40 - page 7

    7. Replace baskets, spring on tension brackets, front baf fle, receiving tray . Delivery chute and left and right side panels. L T ransmission Assembly Re- placement: (Figur e #1 1) 1. Follow steps 1 thru 5 in Section K. 2. Remove drive chain, hubbed sprocket, bearing retainers and bearings. (Refer to Sections I & J ) 3. Slide assembly shaft to ...

  • Merco Savory C-40 - page 8

    N Coupling Assembly Re- placement: (Refer to Figur e #1 1) 1. Follow steps 1 thru 5 Section K. 2. Remove insulation. Refer to Steps 2 & 3 Section D. 3. Remove wire guard. Refer to Section O. 4. Locate the four screws on the upper inside corners of the toaster that hold case top in place. Loosen screws and lift off top. A rubber mallet or simila ...

  • Merco Savory C-40 - page 9

    0 Wire Guard Replacement: (Refer to Figure #21) 1. Remove left side panel and insulation. 2. Remove the three nuts holding end plate and remove plate. 3. Slide out wire guard. 4. Insert new wire guard into track. NOTE: Use rear track for toasting buns or bread. Use forward track for toasting bread only . 5. Replace end plate, nuts, insulation and s ...

  • Merco Savory C-40 - page 10

    10 ...

  • Merco Savory C-40 - page 11

    11 ...

  • Merco Savory C-40 - page 12

    1 1 1 1 North Hadley Road Fort Wayne, IN 46804 T echnical Service Hotline: 800-678-951 1 T elephone: 260-459-8200 www .mercosavory .com ...

Manufacturer Merco Savory Category Toaster

Documents that we receive from a manufacturer of a Merco Savory C-40 can be divided into several groups. They are, among others:
- Merco Savory technical drawings
- C-40 manuals
- Merco Savory product data sheets
- information booklets
- or energy labels Merco Savory C-40
All of them are important, but the most important information from the point of view of use of the device are in the user manual Merco Savory C-40.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Merco Savory C-40, service manual, brief instructions and user manuals Merco Savory C-40. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Merco Savory C-40.

Similar manuals

A complete manual for the device Merco Savory C-40, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Merco Savory C-40 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Merco Savory C-40.

A complete Merco Savory manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Merco Savory C-40 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Merco Savory C-40, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Merco Savory C-40, that we can find in the current document
3. Tips how to use the basic functions of the device Merco Savory C-40 - which should help us in our first steps of using Merco Savory C-40
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Merco Savory C-40
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Merco Savory C-40 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Merco Savory C-40?

Use the form below

If you did not solve your problem by using a manual Merco Savory C-40, ask a question using the form below. If a user had a similar problem with Merco Savory C-40 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)