English dropdown-ico

Manual Speco Technologies CS4

98 pages 4.81 mb
Download

Go to site of 98

Summary
  • Speco Technologies CS4 - page 1

    ...

  • Speco Technologies CS4 - page 2

    ...

  • Speco Technologies CS4 - page 3

    4- & 8- Channel Digital Video Recorder i WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WA RNI NG : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COV ER (OR BACK). NO USER-SER VICEABLE PART S INSIDE. REFER SERVICI NG TO QUALIFIED SERVICE PE RSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to aler ...

  • Speco Technologies CS4 - page 4

    Oper ation Inst ructi on ii Import ant Safeguar ds 1. Read Instruction s All the safety and operating instructions should be read before the appli ance i s oper ated . 2. Retain Instructions The safety and oper ating instructions should be retained f or future reference. 3. Clea ning Unplug this equipment from the wall outlet before cleaning it. Do ...

  • Speco Technologies CS4 - page 5

    4- & 8- Channel Digital Video Recorder iii Table of Contents Chapter 1 ─ Introduction ............ ............. ................ ................ ................ ................ ....... 1 Features............ ................ ................ ................ ................ ................ ................ .......... 1 Technical Overv i ...

  • Speco Technologies CS4 - page 6

    Oper ation Inst ructi on iv Copy Button .................. ................ ................ ................ ................ ................ ........ 11 Play/Stop B utton .. ............... ................ ................ ................ ................ ................ .. 12 Turning on the Power ............... .............. .............. ...

  • Speco Technologies CS4 - page 7

    4- & 8- Channel Digital Video Recorder v Playing Recorded Video ................. ................ ............. ............. ................ .............. .. 65 Searching Video .................. ................ ................ ............. ................ ................ ........ 66 Search Me nu ................ ................ ..... ...

  • Speco Technologies CS4 - page 8

    Oper ation Inst ructi on vi List of Illustra tions Figure 1 ─ Typical DVR installation. ......... ........................... ..................... ........................... ..... 2 Figure 2 ─ 8-Channel DVR rear panel. .......................... ...................... .......................... ........... 3 Figure 3 ─ DVR front panel. .... ...

  • Speco Technologies CS4 - page 9

    4- & 8- Channel Digital Video Recorder vii Figure 49 ─ Speco Remote set up screen. ................................ ........................... ................... 47 Figure 50 ─ Notification Callback setup screen. ............ ........................... ........................... ... 47 Figure 51 ─ Notification Mail setu p screen. .... ...

  • Speco Technologies CS4 - page 10

    Oper ation Inst ructi on viii ...

  • Speco Technologies CS4 - page 11

    4- & 8-Channel Digital Video Recorder 1 Chapt er 1 ─ Introduction Features Your color digital video recorder (DVR) provides recording capab ilities for four or eight camera inputs. It provides exc eptional picture qu ality in both live and pl ayback modes, and offers the following features:  4 or 8 Composit e Video Input Connec tors  Co ...

  • Speco Technologies CS4 - page 12

    Oper ation Inst ructi on 2 Your DVR can be set up for event or time-lapse r ecor ding. You can de fine times to record, a nd the schedule can chan ge for different days of the week and user defined holi days. The DVR can be set up to alert you when the hard disk dr i v e i s f u l l, o r i t c a n b e s e t t o r e c o r d o v e r the oldest video ...

  • Speco Technologies CS4 - page 13

    4- & 8-Channel Digital Video Recorder 3 Chapt er 2 ─ Installation Package Con tents The package contains the following:  Digital Vi deo Recorder  Power Adaptor a nd Power Cord  Oper ation Instru ction (T his Document)  Speco Central Software CD and Ope ration Instruction  Infrared Remo te Control Required Installation Tools No ...

  • Speco Technologies CS4 - page 14

    Oper ation Inst ructi on 4 Audio In/Out Your DVR can record audio fr om up to four sources. Connect the audio sources to Audio In 1 , Audio In 2 , Audio In 3 and Audio In 4 as needed using RCA j acks. Connect Audio Out to your amplifier. NOTE: It is th e user’s respon sibility to det ermine if local laws and regula tions pe rmit rec ording a udio ...

  • Speco Technologies CS4 - page 15

    4- & 8-Channel Digital Video Recorder 5 Alarm Input/Output NOTE: To make connect ions on the Alarm Connector Strip, press and hold t he button and inser t the wire in t he hole belo w the button. After releasing the button, tug gently on the wire to make certain it is connected. To disconnect a w ire, press and hold the bu tton above the wire a ...

  • Speco Technologies CS4 - page 16

    Oper ation Inst ructi on 6 Connector Pin Outs: Maste r Unit Slave Unit RX → T o → TXD TX → T o → RXD GND → T o → GND NOTE: Refer to the following for pin-out details for the 9-pin connector of the slave un it. Male Female Pin 2 RXD (Receive Data) Pin 3 TXD (Transmit Data) Pin 5 GND (Ground) Power Cord Connector Connect t he connector f ...

  • Speco Technologies CS4 - page 17

    4- & 8-Channel Digital Video Recorder 7 Chapt er 3 ─ Co nfigur ati on NOTE: Your DVR should be completely installed before proceeding. Refer to Chapter 2 ─ Installation . Front Panel Contro ls Figure 3 ─ DVR front panel. Menu But ton Copy Button Esc Button Play/Sto p Button Camera B uttons Arrow Buttons Play/Pause Button HDD LED Power LED ...

  • Speco Technologies CS4 - page 18

    Oper ation Inst ructi on 8 Copy Button Pressing the COPY button allows you to copy video clips. Esc Button During menu set up, pressing the ESC butt on closes the current menu or set up dialog box. Play/Stop Button Pressing the PLAY/STOP button enters the playback mode, and pressing the bu tton again exits the playback mod e. When e ntering the pla ...

  • Speco Technologies CS4 - page 19

    4- & 8-Channel Digital Video Recorder 9 Power LED The POWER LED is lit when the unit is On. USB Port A USB port on the front p anel is provide d to connect ext ernal hard di sk or flash drives for video clip copying or s ystem upgrades. Position external drives close enoug h to the DVR so that you can make the cable connections, usually less th ...

  • Speco Technologies CS4 - page 20

    Oper ation Inst ructi on 10 ID Button If a DVR System ID is set to 0, the infrared re mote cont rol will control that DVR with out any additional op erations. ( Refer to th e System Information set up screen in thi s chapter for fu rther infor mation o n setting the Sy stem ID .) If the sy stem ID is 1 to 16 , you mu st to pre ss the ID button and ...

  • Speco Technologies CS4 - page 21

    4- & 8-Channel Digital Video Recorder 11  Stop: Pressing the button stops pla yback and enters t he Live Monitoring mo de.  Backward: When in the pause mode, pr essing the butt on moves to the previous image.  Forward: When in the pause mo de, pressing the button moves to the ne xt image. In the Live Monit oring mode, pressing any play ...

  • Speco Technologies CS4 - page 22

    Oper ation Inst ructi on 12 Play/Stop Button Pressing the PLAY/STOP butt on enters the playback m ode, and pressing the but ton again exits the playback mode. When en tering the pl ayback mode, video i s paused. Pressing the button pla ys back video at regular speed. The screen di splays when the D VR is in the Pau se mode and the screen display s ...

  • Speco Technologies CS4 - page 23

    4- & 8-Channel Digital Video Recorder 13 NOTE: To log t he user out of th e system, press the MENU button o n the front panel or move the mouse pointer to the top of the screen and then selec t (Logout) in the Li ve Monitoring menu. The Logout screen displays asking you t o confirm whether or not you want to log out the current user. Figure 6 ? ...

  • Speco Technologies CS4 - page 24

    Oper ation Inst ructi on 14 System Setup Figure 8 ─ System menu. Information Highlig ht Information in the Sy stem menu and press the button. The Informa tio n setup screen appears. Highlight the box beside Sy ste m ID and pre ss the button. Change the number by highlighting it and using the Up and Do wn arrow buttons to increase and de crease th ...

  • Speco Technologies CS4 - page 25

    4- & 8-Channel Digital Video Recorder 15 Highlightin g the Instal l button an d pressing the button will in stall the selected software package . Highlighting the Cancel bu tton and pr essin g the button will close the window without upgrad ing the software. If the upg rade package file is not in stalled on the DVR properl y, you will get an er ...

  • Speco Technologies CS4 - page 26

    Oper ation Inst ructi on 16 Highlight the box beside File name and press the button. A virtual k eyboard allows you to enter the file name. Selecting Export will save the log information in .txt file format on the USB device. NOTE: When opening th e saved .txt file, setting to the proper chara cter encoding and using fixed width fon ts will be requ ...

  • Speco Technologies CS4 - page 27

    4- & 8-Channel Digital Video Recorder 17 Highlight the Holiday t ab, and t he Holiday setup screen appears. Highlightin g the Time Sync. tab causes the Time Sync. setup screen to display. You can set up time synchronizati on between the DVR and stan dard time servers that are available in most time zones a nd countries, or between t he DVR and ...

  • Speco Technologies CS4 - page 28

    Oper ation Inst ructi on 18 NOTE: The DVR does N OT support USB hard disk driv es with a version lo wer than 2.0. The Information column displa ys whether the device i s being used or not. Other ind icates the device has been used for anot her DVR. Highlig hting Clear and pressing the butt on will clear all video data. You will be asked to verify t ...

  • Speco Technologies CS4 - page 29

    4- & 8-Channel Digital Video Recorder 19 The Temper ature co lumn display s the temper ature of the storage device.  Good – The temperature does not exceed the user-defined tem perature threshold.  Bad – The temperature exceeds the user-defined temperature threshold.  N/A – The DVR cannot read the temperature. The S.M.A.R.T. colu ...

  • Speco Technologies CS4 - page 30

    Oper ation Inst ructi on 20 Highlighting a Group Name and pr essing the bu tton a llows y ou to ch ange t he auth ority leve ls assigned to the group. CAUTION: Write dow n the new passw ord and save it in a secure place. If the pa ssword is forgotte n, the unit must be reset using the Factory Re set Button a nd all data settings will be lost. Highl ...

  • Speco Technologies CS4 - page 31

    4- & 8-Channel Digital Video Recorder 21  PTZ Setup – The user can establish all PTZ settings on a local sy stem or a PC running Speco Central.  Alarm-Out Se tup – The user can establish all Al arm-Out settin gs on a lo cal syste m or a PC runni ng Speco Central.  Co vert Ca mera Setup – The user can establish all Co vert Camera ...

  • Speco Technologies CS4 - page 32

    Oper ation Inst ructi on 22 Figure 17 ─ EZ Record screen. If y ou selected the EZ Recor d , se lec ting the Next button starts the EZ Record. Date/Time Setup  Date: Set the system date and select the date format.  Time: Set the system time and select the time format.  Time Zone: Select your time zone. The Time Zone can be select ed on th ...

  • Speco Technologies CS4 - page 33

    4- & 8-Channel Digital Video Recorder 23 NOTE: The recor ding resolut ion will be set to Very High when selecting High Video Qu ality Priority Prof ile , High when sel ecting Standard Record ing Profile , and Standard when selecting Longer R ecordi ng Time Prio rity Prof ile . NOTE: The recordi ng quali ty and rec ording s peed of ea ch camera ...

  • Speco Technologies CS4 - page 34

    Oper ation Inst ructi on 24 LAN Setup Select betw een Auto C onfiguration and Manual Configuration for net work configuration, an d then selec t the Test butt on to test the net work configurati on you selected. NOTE: S electing Auto Configurat ion allows the DVR to automa tically obtain LAN parame ters (IP addres s, Gatew ay, Subne t Mask and DNS ...

  • Speco Technologies CS4 - page 35

    4- & 8-Channel Digital Video Recorder 25 Select the Finish button to finish the EZ Setup. Shutdown Highlig ht Shut down in the System menu and press the button. The Shutdown screen displays asking you to confi rm whether or not you want to shut the system down. Figure 19 ─ Shutdown screen. Recording Se tup Figure 20 ─ Record menu. Record Hi ...

  • Speco Technologies CS4 - page 36

    Oper ation Inst ructi on 26 NOTE: The total ip s of all ca mera chan nels wi ll be limit ed to 12 0 ips (60 ip s for 4-ch Model) when set to High reso lution and 60 ips (30 ip s for 4-ch Model) wh en set to Very High resolution. NOTE: When set to High or Very High res olution, the maxi mum recordin g speed of each camera ch annel might d ecrease so ...

  • Speco Technologies CS4 - page 37

    4- & 8-Channel Digital Video Recorder 27 Highlighting the Panic Reco rding – ips and pressing the bu tton al lows y ou to set the im ages per second for Panic recordi ng. You can select from 0.10 to 30.0 0 ips (25.00 ips PAL). Highlightin g the Panic Recording – Quality and pressing the button allows y ou to set the recorded image quality f ...

  • Speco Technologies CS4 - page 38

    Oper ation Inst ructi on 28 Highlight the Schedule Mode b ox and press the butto n. You can se lect between Simple Mode and Advanced Mo de . Selecting Advanced Mode allow s you t o set up indivi dual r ecord ing schedule for each event. Highlight the + and press the button to add a schedule item . Highlight the box under the Day headin g and press ...

  • Speco Technologies CS4 - page 39

    4- & 8-Channel Digital Video Recorder 29 NOTE: Day , Ran ge and Channels that are not defi ned will use the setting v alues of th e previous sch edule item. NOTE: Whe n more than two schedule items are reg istered in the same day and time r ange, the DVR will fo llow the latest regi stered sche dule item. NOTE: Wh en multipl e events are d etec ...

  • Speco Technologies CS4 - page 40

    Oper ation Inst ructi on 30 NOTE: When the DVR is in the Time or Time & Event mode, it ignores the pre-event settings and fol lows the time settin gs. Event Setu p Figure 26 ─ Event menu. Alarm -In Highlig ht Alarm-In in the Ev ent menu and pre ss the button. The Alarm- In setup screen appe ars. You can set up t he DVR to start panic recordin ...

  • Speco Technologies CS4 - page 41

    4- & 8-Channel Digital Video Recorder 31 Highlight the desired box under the Alarm- Out heading, and press the button. Select between Alarm Output and Beep (DVR’s inte rnal buzzer) that you woul d like to activate and to sound whenever the DVR detects an input on the associated alarm input. NOTE: For t he Alarm-O ut action, the alarm output a ...

  • Speco Technologies CS4 - page 42

    Oper ation Inst ructi on 32 Motion Detection Highl ight Motion De tectio n in the Event menu and press the bu tton. Th e Motion Detect ion setup scr een app ears. You can defin e the area of the image w here you want to detect motion; e.g., a doorway . Highlight the box unde r the Zone heading, and press t he button. The Motion Detect ion Zone scre ...

  • Speco Technologies CS4 - page 43

    4- & 8-Channel Digital Video Recorder 33 Turning Zone Vie w On will allow you to observ e how the DVR is reactin g to motion . When in the motion vie wing mode, any detect ed motion within t he zone will be displa yed in red. You can control ex cessive event logging and rem o te notificatio n of motions de tected after the motion dwel l time b ...

  • Speco Technologies CS4 - page 44

    Oper ation Inst ructi on 34 NOTE: For t he Alarm-O ut action, the alarm output and beep you select should b e set to the Event mod e in the Alarm-Out set up screen (Schedu le tab). Highlight the box under the Notif y heading an d press the button. You can toggle the entire list On and Off by high lighting Notific ation and pressing t he button. You ...

  • Speco Technologies CS4 - page 45

    4- & 8-Channel Digital Video Recorder 35 NOTE: For the Record action, the camera you select should be set to the Event or Time & Event r ecording mode i n the Record Schedule set up screen. Highlight the box under the Alarm-Out heading and press the button. Sel ect between Alarm Output and B eep (DVR’s internal buzzer) that you w ould lik ...

  • Speco Technologies CS4 - page 46

    Oper ation Inst ructi on 36 Highlighting the b ox under the Sensitivity heading allows you to adjust the DVR’s sensitivity to video blind for Black and White in dependently from 0 (Neve r) and 1 (least se nsitive) to 15 (most sensitive). NOTE: Video b lind might N OT be detecte d for a camera with a very noisy ima ge especially when set for low s ...

  • Speco Technologies CS4 - page 47

    4- & 8-Channel Digital Video Recorder 37 Highlight the box under the Alarm-Out heading and press the button. Sel ect between Alarm Output and B eep (DVR’s internal buzzer) that you w ould like to ac tivate and to sound whenever the DVR detects vid eo blind on the selected camera. NOTE: For t he Alarm-O ut action, the alarm output and beep you ...

  • Speco Technologies CS4 - page 48

    Oper ation Inst ructi on 38 Highl ight Se tup… , and press the button. Use the ATM or POS manufacturer’s r ecommended settings when confi guring the RS232, RS485, USB-Seri al or LAN ports. Highlight the bo x beside Text-In Product , and press the bu tton. S elect yo ur device from th e list. NOTE: The f ollowing descript ion is for a Ge neric T ...

  • Speco Technologies CS4 - page 49

    4- & 8-Channel Digital Video Recorder 39 NOTE: For the Record action, the camera you select should be set to the Event or Time & Event r ecording mode i n the Record Schedule set up screen. Highlight the box under the Alarm-Out heading and press the button. Sel ect between Alarm Output and B eep (DVR’s internal buzzer) that you w ould lik ...

  • Speco Technologies CS4 - page 50

    Oper ation Inst ructi on 40 Highlighti ng the box under the Interv al heading beside each alarm-in and pressing the button allows you to change the inter val that you want the DVR to run self- diagnostics on Alarm Inpu ts. You can select from 1 hr. to 30 da ys or Never . Highlight the Storage ta b and the Storage setup screen displays. Highli ght t ...

  • Speco Technologies CS4 - page 51

    4- & 8-Channel Digital Video Recorder 41 Highlight the second box beside Disk Temperature , and press the button. Select either ºF (Fahrenheit) or ºC (Celsius), and press the button. Highlight the Actions tab and the Sy stem Event Actions setup screen displays. NOTE: Alar m-Out action cannot be set to Syst em , Boot Up , Restart , Shutdown an ...

  • Speco Technologies CS4 - page 52

    Oper ation Inst ructi on 42 Check Alarm-In and Ch eck Recording will be highlighted when e ach event is detec ted based on the settings you made in the System Event setup screen on the Event menu. Panic Record will be highlighted w hile the DV R is in the panic reco rding mode. Disk Almost Full w ill be highligh ted when the DV R is not in the Recy ...

  • Speco Technologies CS4 - page 53

    4- & 8-Channel Digital Video Recorder 43 Highlight the box beside Remote Watch – Quality and press the button. You can select the Qualit y from: Very High , High , Standard and Basic . Press the bu tton to set the Q uality. NOTE: The higher Quality sett ings require higher Transfer Sp eed settings. The transfer speed you set is the maximum sp ...

  • Speco Technologies CS4 - page 54

    Oper ation Inst ructi on 44 NOTE: You w ill need to get the appropriate IP Addre ss, Gatew ay and Subnet Mask from your network a dminis trator. Highl ight the box b eside DNS Server . Press the Up and Dow n arrow buttons to set th e IP add ress of the DNS server. Highl ight Use UPnP and press the button to toggle between On an d Off. When it is On ...

  • Speco Technologies CS4 - page 55

    4- & 8-Channel Digital Video Recorder 45 CAUTIO N: When changi ng the port se ttings, you m ust change the port settings on the PC running Speco Central as well. Refer to the Speco Central Operatio n Instruction for details. NOTE: Entering the ID and Password and highlig hting OK reads the current IP address of the DVR con figured by the A DSL ...

  • Speco Technologies CS4 - page 56

    Oper ation Inst ructi on 46 NOTE: You will need to get the IP Address or domain name of th e DV R N S S e r ve r f r o m y o ur network a dminis trator. NOTE: You can use the domain name ins tead of IP address if you already set up the DNS Server when setting up t he LAN. Highlight the box beside Port and press the button. Set the port numb er of t ...

  • Speco Technologies CS4 - page 57

    4- & 8-Channel Digital Video Recorder 47 NOTE: Se lecting Use Mobile sets the re corded image re solution to Standard automatic ally regar dless of yo ur Reco rd setti ngs. NOTE: Selecting Use Mobile sets the remote watc h quality to Ba sic automatically regardless of your Network – Remote Wat ch settings. NOTE: Select ing Use Mobile set s th ...

  • Speco Technologies CS4 - page 58

    Oper ation Inst ructi on 48 Highlight the box beside Re try and enter the number of times you wou ld like the DV R to try contacting the computer. You can selec t fr om 1 to 10 re tries . Highlight the Mail tab, and the Mail se tup screen d isplays. Highligh t the first box under Recipient and press the button. A virtual ke yboard appears that you ...

  • Speco Technologies CS4 - page 59

    4- & 8-Channel Digital Video Recorder 49 Highlight the box besi de Port and press the button. Use the arrow buttons to enter the SMTP Server por t number obtained from your sy stem administrator . The default p ort number is 25. Highlight Enable SSL/TLS and press the button to toggle bet ween On and Off. When it i s On, the DVR can send an emai ...

  • Speco Technologies CS4 - page 60

    Oper ation Inst ructi on 50 Highlight the Schedule t ab, and the Schedule setup screen di splays. The Range box allows you to set the time tha t the notification sc hedule will be ac tive in 15 - minute incremen ts from 00:00 to 24:00. Highlight the desired box under the Notify heading, and press the button. The Schedule Notify menu appears. You ca ...

  • Speco Technologies CS4 - page 61

    4- & 8-Channel Digital Video Recorder 51 NOTE: A user who does not h ave Covert Camera View authority cannot v iew video from camera s set to Cover t 1 or Co vert 2 in both the live monitoring and playback modes. Highlight the PTZ tab, and th e PTZ setup screen displays. You can assign IDs to each camera by highlighting the box under the ID hea ...

  • Speco Technologies CS4 - page 62

    Oper ation Inst ructi on 52 Audio Highlight Audio i n the Devices menu and press the button. The Audio s etup screen appears. Alarm -Out Highl ight Alarm-Out in the Device s menu and press t he button. The Alarm -Out screen allows you to change the settings and establish a schedule for the alarm outp ut from the DVR. Highlight the Schedule tab, and ...

  • Speco Technologies CS4 - page 63

    4- & 8-Channel Digital Video Recorder 53 The Range box al lows you to set the time th at the alarm sche dule will be active in 15-minute increments from 00:00 to 24:00. The Mode box allows you to set how the alarm reacts during the scheduled time. When set to On , the Alarm-Out is active during th e scheduled time. When set to Event , the Alar ...

  • Speco Technologies CS4 - page 64

    Oper ation Inst ructi on 54 You can select the audio files associat e with each event. Highlight the box under the Associat ed Audio and press the button. A list of audio file name appears, and you can sele ct which audio file you want to associated with that event . You can import saved audio files o r export the current audio files. To import sav ...

  • Speco Technologies CS4 - page 65

    4- & 8-Channel Digital Video Recorder 55 NOTE: Any audio fil e used for Digital Det errent should be na med “Sound_1” to “Soun d 16.” (Not Case Sensitiv e) Display Highlight Display i n the Devices menu and press the button. The Display scree n allows you to select what infor mation will be display ed on the monitor.  Remote Contro l ...

  • Speco Technologies CS4 - page 66

    Oper ation Inst ructi on 56 NOTE: Any cameras that are Off, have lost v i deo or are set to Covert ( unless the u ser has auth orit y to vi ew cove rt ca meras ) will be excluded from the Ca meo sequence. You can define the s creen layout in a va riety of form ats and se t the DVR t o sequence t hrough the differe nt screen la y outs (pa ges) so th ...

  • Speco Technologies CS4 - page 67

    4- & 8-Channel Digital Video Recorder 57 Remote Control Highlight Remote Control in the Devices me nu and press the button. The Remot e Control setup screen allows you to select a port and make corre ct s ettin gs for a rem ote k eyboar d. Highl ightin g OK and pressing the button applies re solution changes. Figure 64 ─ Remote Control setup ...

  • Speco Technologies CS4 - page 68

    Oper ation Inst ructi on 58 ...

  • Speco Technologies CS4 - page 69

    4- & 8-Channel Digital Video Recorder 59 Chapt er 4 ─ Oper ation NOTE: This chapter ass umes your DVR has been installed and configur ed. If it has not, please ref er to Chapt ers 2 and 3. The DVR’s controls are simi lar to a VCR. As with a VCR, the main f unctions are recording and playing back vi deo. However, you have much greater cont r ...

  • Speco Technologies CS4 - page 70

    Oper ation Inst ructi on 60 NOTE: The Live Monit oring me nu also can be disp layed by moving th e mouse poi nter to the top of t he screen. Live Monitoring Menu Display Selecting (Display Menu) in the Live Monitoring menu disp lays the following Display Menu.  Screen: Selecting Scree n and choosing the screen mode (PIP, 2x2, 1P5, 1P7 or 3x3) di ...

  • Speco Technologies CS4 - page 71

    4- & 8-Channel Digital Video Recorder 61 Sequence Selecting (Sequence) in the Live Monitoring menu causes the cameras to display sequentially. When in one of the mu ltiview formats, selec ting Sequence will cause th e DVR to g o through predefined screen layouts (F ull Sequence) . Or, th e bottom, r ight screen w ill disp lay live c ameras sequ ...

  • Speco Technologies CS4 - page 72

    Oper ation Inst ructi on 62 Digital Deterr ent Selecting (Digital Deterrent) in the Live Monitoring menu displays the following setup screen an d al low s t he D VR to pl ay manuall y. Highlight t he box beside Source name and press the button to s elect the sourc e file to play. H ighligh ting Trigge r plays the selected file as the d igital deter ...

  • Speco Technologies CS4 - page 73

    4- & 8-Channel Digital Video Recorder 63 Zoom Mode You can enlarge an area of the video by selecting ( Camera Menu)  Zoom in the Live Monitoring menu. For a few seconds after sel ecting (Camera Menu)  Zo om from th e Camer a, a rectangle display s on the screen . A r ectangle shows the area that will be enlarged. You can move the rectangl ...

  • Speco Technologies CS4 - page 74

    Oper ation Inst ructi on 64 Figure 66 ─ PTZ Select Camera menu. < Set Preset > < Move to Pres et > You can save camer a position setting s as “presets” so th at you can go directly to desired views. Once you have the camera at th e desired settings, press the PRESET SET button on the remote control, and the Set Preset dialog box w ...

  • Speco Technologies CS4 - page 75

    4- & 8-Channel Digital Video Recorder 65 Recording Vi deo Once you have installed the DVR fo llowing the in structions in Ch apter 2 ─ Installat ion , it is ready to recor d. The DVR will star t recor ding based on the setting s you made in the Record setup screen. See Chapter3 ─ Configurati on. Recy cle On or Recycle Off . The factory defa ...

  • Speco Technologies CS4 - page 76

    Oper ation Inst ructi on 66 Camera Bu ttons: Pr essing the ind ividual came ra butto ns will caus e the sele cted camer a to display full screen. Arrow Buttons: Pressing the button play s video backward at high speed. Pressing the button again toggles the pla yback speed from , and . Pressing the b utton plays video forward at high spee d. Pressing ...

  • Speco Technologies CS4 - page 77

    4- & 8-Channel Digital Video Recorder 67 NOTE: The Searc h menu also ca n be di splaye d by movi ng the mouse poi nter to the t op of the sc reen. Search Menu Display Selecting (Display Menu) in the Search menu displays the foll owing Display Menu.  Screen: Selecting Screen and choosing the screen mode (PIP, 2x2 or 3x3) displa ys the cameras ...

  • Speco Technologies CS4 - page 78

    Oper ation Inst ructi on 68 Export Selecting (Export) in the Search menu displays the following Export menu. See the fo llowin g Clip Copy section for details.  EZ Copy: Selecting EZ Copy will set the starting poi nt of the video to be clip copied, an d the icon display s at the bottom- left co rner of the screen. Selec ting EZ Cop y a gain will ...

  • Speco Technologies CS4 - page 79

    4- & 8-Channel Digital Video Recorder 69 Panic Selecting (Panic) in the Search menu st arts panic recording of al l cameras, and selecti ng again st ops panic recording. Data Source Selecting (Data Source) in t he Search menu allows you to sel ect the data source to be searched. Selecting Record searches reco rded data on pr imary storage insta ...

  • Speco Technologies CS4 - page 80

    Oper ation Inst ructi on 70 Highlight the box beside To and press the butt on to toggle betwe en On and Off. When set to Off, you can enter a specif ic Date and Time. When set to On, the sear ch will be to the last recorde d image. Highlight the box be side Check Time Overlap and press the button. It toggle s between On and Off. You will only be ab ...

  • Speco Technologies CS4 - page 81

    4- & 8-Channel Digital Video Recorder 71 Record Table Search NOTE: The r ecorded data in the time range located aft er the yellow vertical lin e is the latest . There are three view modes. St andard vi ew, Expanded view a nd Compact view. St andard view (default) d isplay s combined reco rding info rmation of all ca mera chan nels curren tly di ...

  • Speco Technologies CS4 - page 82

    Oper ation Inst ructi on 72 Selecting located at the bo ttom disp lay s the Search menu.  Go to: Displays the first or last recorded image, or searches by date and time (see the pr evious Searching Video – Go To section of this chap ter for more det ails).  Clip-Copy: Clips a video se gment and saves it (see the followi ng Clip Copy section ...

  • Speco Technologies CS4 - page 83

    4- & 8-Channel Digital Video Recorder 73 Highlight the box beside To and press the butt on to toggle betwe en On and Off. When set to Off, you can enter a specif ic Date and Time. When set to On, the sear ch will be to the last recorde d image. Highlight the box beside Typ e and pres s the button. You can select between Motion Search and Museum ...

  • Speco Technologies CS4 - page 84

    Oper ation Inst ructi on 74 Text-In Search NOTE: It is possib le that no recorded i mage display s on the c urrent scree n. Change t he screen mode to 3x3, for the 8-channel DVR and 2x2 for the 4-channel DVR, a nd you will be able to easily see the cameras that have re corded video during target time . NOTE: Text Input infor mation will b e overlai ...

  • Speco Technologies CS4 - page 85

    4- & 8-Channel Digital Video Recorder 75 Highlightin g the + and pres sing the button allows you to add a new set of search parameter. Set up the des ired search par ameter. Refer to the Appendix – Text-In Search Examples for further informati on on setting up search pa rameters. The column can be used to delete a set of search parameter or e ...

  • Speco Technologies CS4 - page 86

    Oper ation Inst ructi on 76 Highl ight the b ox beside Password and press the b utton. A virtual keyboard appears allow ing you to enter the password for reviewing the vi deo clips. Highlight the box beside Dest. and pres s the button. You can select the storage device on which you would li ke to record the vi deo clip. CAUTION: The USB device for ...

  • Speco Technologies CS4 - page 87

    4- & 8-Channel Digital Video Recorder 77 Appendi x USB Hard Di sk Drive Prepar ation Preparing the USB hard disk drive in Windows 2000 NOTE: Prepa ring a USB hard d isk drive under Wind ows XP, Windows Vista and Window s 7 is almost id entical to Windows 20 00. 1. Con nect the U SB hard disk drive to your computer using th e USB Cable. 2. Turn ...

  • Speco Technologies CS4 - page 88

    Oper ation Inst ructi on 78 12. Right click the newly created hard disk drive icon and select “Forma t” . 13. In the For mat Screen, select “Full” as the “Format type” and click “Start” . 14. After formatting is co mplete, connect the USB hard disk drive to the DVR. Text-In Sear ch Examples Search Example I 1 2 3 4 5 6 1234567890123 ...

  • Speco Technologies CS4 - page 89

    4- & 8-Channel Digital Video Recorder 79 Search Example II 1 2 3 4 5 6 123456789012345678901234567890123456789012345678901234567890 Item Unit price Qty amount ================================================== Coke | $ 2.20 | 1(s) $ 2.20 Fanta | $ 2.20 | 1(s) $ 2.20 Hotdog | $ 3.50 | 3(s) $ 10.50 Pepsi | $ 1.95 | 1(s) $ 1.95 =================== ...

  • Speco Technologies CS4 - page 90

    Oper ation Inst ructi on 80 Computer system requi rements for using the Speco Remot e program are:  Operating S ystem: Microsoft ® Windows ® XP x86 (32 Bit) (Ser vice Pack 3), Micr osoft ® Windows ® Vi sta x86 (32 Bit) (Servic e Pack 1), Microsoft ® Windows ® 7 x86 (32 B it)  CPU: Intel Pentium III (Celeron) 600MHz or f aster  RAM: 1 ...

  • Speco Technologies CS4 - page 91

    4- & 8-Channel Digital Video Recorder 81 NOTE: There mi ght be a pr oblem w ith scre en displa y or scree n upda te due to low image transmission speed when using the Mic rosoft Windows Vista or higher operating system. In this situa tion, it is recommended yo u disable the Auto Tu ning capability of you r computer. Run the Command Prompt with ...

  • Speco Technologies CS4 - page 92

    Oper ation Inst ructi on 82 ⑨ Click the to control alarm out dev ices at the remote sit e. ⑩ Click the to set up the image drawing mode and OSD display. You can adjust t he display speed by changing t he image drawing mode, and select OSD informat ion to be displa yed on the s cre en. ⑪ Click the to save the curr ent image as a bitmap or J PE ...

  • Speco Technologies CS4 - page 93

    4- & 8-Channel Digital Video Recorder 83 ① Click the to log out the Speco Remote program. ② Click the to access to the web mo nitoring mod e. ③ Position t he mouse pointer on the Web Search logo t o see the version of the Speco Remot e program. ④ The DVR information window disp lays the time informa tion of record ed data on the remote ...

  • Speco Technologies CS4 - page 94

    Oper ation Inst ructi on 84 ⑪ Click the to save any video clip of recorded data as an executable f ile, or click the to save the current image in a bitmap or JPEG file format. Click the to pr int the curren t image on a printer connec ted to your computer . ⑫ Click the t o reload the recording data. ⑬ The timetable displays recorded data of t ...

  • Speco Technologies CS4 - page 95

    4- & 8-Channel Digital Video Recorder 85 Error Code Notices System Upgrade Related Clip Cop y Relate d No. Description No. Description 0 Unknow n error . 0 Unknown error. 1 File ve rsion error. 1 Device err or. 2 Operating system versio n error. 2 Mounting failed . 3 Soft ware v ersi on err or. 3 No media. 4 Kerne l ve rsion e rror. 4 Inv alid ...

  • Speco Technologies CS4 - page 96

    Oper ation Inst ructi on 86 Map of Scr eens ...

  • Speco Technologies CS4 - page 97

    4- & 8-Channel Digital Video Recorder 87 Specifications VIDEO Signal Format NTSC or PAL (Auto Detect ) Video Input Composite: 4 or 8 inputs, 1 Vp-p, aut o-terminating , 75 Ohms Monitor Ou tputs Composit e: 1 BNC, 1 Vp-p, 75 O hms VGA: 1 (Auto Det ect) Video Resol ution Composite: 720x480 (NTSC ), 720x576 (PAL ) VGA: 800x600, 1024x7 68, 1280x102 ...

  • Speco Technologies CS4 - page 98

    Operation Instruction V1.0 88 GENERAL Di me ns i on s (W x H x D) 10.4" x 2.0" x 7.5" (26 5mm x 52mm x 191mm) Unit Weigh t 3.7 lbs. (1.7kg) Shipping Weigh t 7.3 lbs. (3.3kg) Shipping Dime nsions (W x H x D) 14.0" x 4.1" x 13.4" (355mm x 103mm x 340m m) Operating Temperat ure 41°F to 104° F (5°C to 40°C) Operating H ...

Manufacturer Speco Technologies Category DVR

Documents that we receive from a manufacturer of a Speco Technologies CS4 can be divided into several groups. They are, among others:
- Speco Technologies technical drawings
- CS4 manuals
- Speco Technologies product data sheets
- information booklets
- or energy labels Speco Technologies CS4
All of them are important, but the most important information from the point of view of use of the device are in the user manual Speco Technologies CS4.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Speco Technologies CS4, service manual, brief instructions and user manuals Speco Technologies CS4. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Speco Technologies CS4.

Similar manuals

A complete manual for the device Speco Technologies CS4, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Speco Technologies CS4 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Speco Technologies CS4.

A complete Speco Technologies manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Speco Technologies CS4 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Speco Technologies CS4, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Speco Technologies CS4, that we can find in the current document
3. Tips how to use the basic functions of the device Speco Technologies CS4 - which should help us in our first steps of using Speco Technologies CS4
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Speco Technologies CS4
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Speco Technologies CS4 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Speco Technologies CS4?

Use the form below

If you did not solve your problem by using a manual Speco Technologies CS4, ask a question using the form below. If a user had a similar problem with Speco Technologies CS4 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)