English dropdown-ico

Manual HP (Hewlett-Packard) L2206TM

33 pages 1.98 mb
Download

Go to site of 33

Summary
  • HP (Hewlett-Packard) L2206TM - page 1

    HP Compaq L2206tm and L2206tmp LED Backlit Touch Monitors User Guide ...

  • HP (Hewlett-Packard) L2206TM - page 2

    © 2012 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in t he United States and/or other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothi ...

  • HP (Hewlett-Packard) L2206TM - page 3

    About this guide This guide provides information on setting up the monitor, operating the touc h screen, troubleshooting, and technical specifications. WARNING! Text set off in this manner indicates that fail ure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follo w ...

  • HP (Hewlett-Packard) L2206TM - page 4

    iv About this guide ...

  • HP (Hewlett-Packard) L2206TM - page 5

    Table of contents 1 Product features ...... ......... ............ .......... ........... ......... ............. ......... ........... ............. .... .... 1 HP LCD Touch Mo nitors ......... ............ ................. ............. ................. .............. ............... ........ ... 1 2 Setting up the monitor ................... . ...

  • HP (Hewlett-Packard) L2206TM - page 6

    vi ...

  • HP (Hewlett-Packard) L2206TM - page 7

    1 Product features HP LCD Touch Monitors The LCD (liquid crystal dis play) monitors have an active matrix, thin -film transistor (TFT) panel. The monitor models and features include: ● L2206tm model, 54.6 cm (21.5-inch) diagonal viewable area display with 1920 x 10 80 resolution, plus full-screen supp ort for lower resolutions; includ es cust om ...

  • HP (Hewlett-Packard) L2206TM - page 8

    ● Passive stylus docked in rear enclosure ● HDCP copy protection on DVI and DisplayPort inputs ● Software and d ocumentation disc that includ es monitor drivers and product documentation ● Energy saver feature to meet requir ements for reduced power consumption ● Intelligent Management AssetControl ● Compliant with the following regulat ...

  • HP (Hewlett-Packard) L2206TM - page 9

    2 Setting up the monitor To set up the monitor, ensure th at the power is turned off to the monitor, co mputer system, and other attached dev ices, and the n follow th e instructions below. Unfolding the monitor pedestal base 1. Lift the monitor from its box and place it face down on a flat surface. 2. Hold down the monitor base with one hand (1) t ...

  • HP (Hewlett-Packard) L2206TM - page 10

    Rear components Figure 2-2 Rear com ponents Component D escription 1 AC power connector Connects the AC power cable to the monitor. 2 DisplayPort Connects the DisplayPort cable to the monitor. 3 VGA connector Connects the VGA cable to the monitor. 4 DVI-D connector Connects the DVI-D cable to t he monitor. 5 Audio connector Connects the audio cable ...

  • HP (Hewlett-Packard) L2206TM - page 11

    Connecting the cables 1. Place the monitor in a convenient, well-v entilated location near the computer. 2. Remove the cable management clip from the pedest al by pulling outward on the two sides of the clip (1) and lifting the clip off the pedestal (2). Figure 2-3 Removing the cable management clip 3. Connect a VGA signal cabl e, DVI-D sign al cab ...

  • HP (Hewlett-Packard) L2206TM - page 12

    6. Connect one end of the powe r cord to the AC po wer connector on t he back of the m onitor, and connect the other end to an electrical wall outlet. Figure 2-4 Connecting the cables WARNING! To reduce the risk of electric shock or damage to the equipment: Do not disable the power cord gr ounding plug. The grounding plug is an important safety fea ...

  • HP (Hewlett-Packard) L2206TM - page 13

    Adjusting the monitor NOTE: Your monitor model may look different than the model in the fo llowing il lustrati ons. 1. Tilt the monitor's panel forward or backwa rd to set it to a comfortable eye level. Figure 2-6 Tilting the monitor 2. Adjust the monitor’s height to a co mfortable position for your indi vidual workstation. The monitor’s t ...

  • HP (Hewlett-Packard) L2206TM - page 14

    3. Pivot the monitor from landscape to portrait or ientation viewing to adapt to your application. a. Adjust the monitor to full-height position and ti lt the monitor back to full-tilt position (1). b. Pivot the monitor clockwise 90° from la ndscape to po rtrait orientation (2). CAUTION: If the monitor is not in full-height and fu ll-tilt position ...

  • HP (Hewlett-Packard) L2206TM - page 15

    Front components Figure 2-9 Front components Table 2-1 Front components Component D escription 1 Menu button Opens, selects from, or exits th e OSD menu. 2 Minus/volume button If the OSD menu is on, press to navigate backward through the OSD menu and decrease adjustment levels. If the OSD menu is inactive, press t o activate the volume adjustment m ...

  • HP (Hewlett-Packard) L2206TM - page 16

    Turning on the monitor 1. Press the power button on the computer to turn it on. 2. Press the power button on the front of the monitor to turn it on. CAUTION: Burn-in image damage may occur on monitors that display the same static image on- screen for 12 o r more consecutiv e hours of non-use. To avoid burn-in image damage on the m onitor screen, yo ...

  • HP (Hewlett-Packard) L2206TM - page 17

    Connecting USB devices USB connectors are used to connect devices such as a digital came ra, USB keyboard, or USB mouse. Two USB conne ctors are loca ted on the side panel of the monitor. NOTE: You must connect the USB hub cable from the mo nitor to the computer to enable the USB 2.0 ports on the monitor. Refer to Step 4 in Connecting the cables on ...

  • HP (Hewlett-Packard) L2206TM - page 18

    Removing the monitor pedestal base You can remove the monitor panel fr om the pedestal base to install the panel on a wall , swing arm, or other mounting fixture. CAUTION: Before beginning to disassembl e the monitor, be sure the mo nitor is turned off and the power and signal ca bles are both disconnected. Also disconnect all USB cables connected ...

  • HP (Hewlett-Packard) L2206TM - page 19

    Mounting the monitor The monitor panel can be attached to a wall, swing arm, or other mounting fixture. NOTE: This apparatus is intended to be supported by a UL or CSA listed wall mount bracket. 1. Remove the monitor panel from the pedestal base. Refer to Removing t he monitor pedestal base on page 12 . CAUTION: This monitor supports th e VESA indu ...

  • HP (Hewlett-Packard) L2206TM - page 20

    Locating the rating labels The rating labels on the monitor provide the spar e part number, product number, and serial number. You may need these numbers when contacting HP about the monitor model. The rating labels are located on the rear panel of the monitor display head. Figure 2-14 Locating th e rating labe ls Installing a cable lock You can se ...

  • HP (Hewlett-Packard) L2206TM - page 21

    3 Operating the touch screen Installing the touch software Microsoft Windows 7/Vist a/XP (plug and play) NOTE: Refer to Conne cting the ca bles on page 5 for instructions on connecting the USB cable. When yo u conne ct the USB cable betw een th e moni tor and a computer running Windows 7, Windows Vista, or Windows XP, the touch driver s oftware wi ...

  • HP (Hewlett-Packard) L2206TM - page 22

    ● Windows XP—Select Start > Control Panel > System , and then select the Hardware tab. Select the Device Manager button. If the driver is installed correctly, two HID-compliant device entries and one USB Human Interface Device entry will appear under the Human Interface Devices category. Also, under the Mice and other pointing devices cat ...

  • HP (Hewlett-Packard) L2206TM - page 23

    Using the touch function NOTE: Before using the touch funct ion, make sure the USB cable is connected an d the Windows operating system is started. NOTE: When the touch function is active, make sure there are no fo reign objects in the areas encircled in the figure below. Figure 3-2 Make su re there are no foreign objects in the encircled a reas Th ...

  • HP (Hewlett-Packard) L2206TM - page 24

    3. Select the View by drop-down list, and then select either Lar ge icons or Small icons . 4. Select the Tablet PC Settings control panel. NOTE: The Tablet PC Settings control panel will only appear after Microsoft Windows 7 recognizes a connected touch monitor. 5. On the Displ ay tab in the Tablet PC Settings, select the name of the first monitor ...

  • HP (Hewlett-Packard) L2206TM - page 25

    6. Select the Calibrate… button. Figure 3-4 Calibrate the display 7. Repeat steps 5 and 6 for the second monitor. NOTE: If you have two monitors that are the same model, be sure to note which model is calibrated first because both wi ll appear with identical names. Using the touch function 19 ...

  • HP (Hewlett-Packard) L2206TM - page 26

    Tips and troubleshooting Tips ● WARNING! Keep the display away fro m any hea t sources, suc h as electr ic radiators, natural gas pipes, or direc t sunlight. Also keep th e display away from excessive dust, mechanical vibration, or shock. For safety , remove the powe r plug prior to cleaning. ● To maintain a brand new appearance of the d isp la ...

  • HP (Hewlett-Packard) L2206TM - page 27

    Touch screen troubleshooting NOTE: For general troubleshooting information, refer to the HP LCD Monitors Reference Guide included on the disc with your monitor. Table 3-2 Touch screen troubleshooting Problem Solution Computer does not recover from Sleep mode when the touch screen is touched. Sleep mode recovery is not supported by the touch screen ...

  • HP (Hewlett-Packard) L2206TM - page 28

    4 Finding more information Refer to the HP LCD Monitors Reference Guide included on the disc with your monitor for additional information on: ● Optimizing monitor performance ● Safety and maintenance guidelines ● Installing software from the dis c ● Using the OSD menu ● Downloading sof tware from the Web ● Agency and regulatory notices ...

  • HP (Hewlett-Packard) L2206TM - page 29

    A Technical specifications NOTE: All specifications represent the typical specifications provided by HP's compo nent manufacturers; actual performance may vary either higher or lower. L2206tm/L2206tmp Table A-1 L2206tm/L2206tmp specifications Display Type 54.61 cm widescreen TFT LCD 21.5 inches widescreen Viewable image size 54.61 cm diagonal ...

  • HP (Hewlett-Packard) L2206TM - page 30

    Table A-1 L2206tm/L2206tmp specifications (continued) Environmental requirements : Temperature (operat ing) Temperature (non-operating) Humidity (operating) Humidity (non-operating) Altitude (operating) Altitude (non-operating) 5° C to 35° C -20° C to 60° C 20% to 80% 5% to 95% 0 m to 5,000 m 0 m to 12,192 m 41° F to 95° F -4° F to 140° F 0 ...

  • HP (Hewlett-Packard) L2206TM - page 31

    Recognizing preset display resolutions The display resolutions lis ted below are the most commonly used modes an d are set as factory defaults. This monitor automaticall y recognizes these preset modes and they will appear properly sized and centered on the s creen. L2206tm/L2206tmp Table A-2 Factory preset modes Preset Pixel format H orz freq (kHz ...

  • HP (Hewlett-Packard) L2206TM - page 32

    Entering user modes The video controller signal may occasionally call for a mode that is not preset if: ● You are not usin g a standard g raphics adapter. ● You are not using a preset mode. It this occurs, you may need to readjust the parame ters of the monitor screen by using the on-screen display. Your changes can be mad e to any or a ll of t ...

  • HP (Hewlett-Packard) L2206TM - page 33

    B LCD monitor quality and pixel policy The TFT monitor uses high-precision technology th at is manufactured according to HP stand ards to guarantee troub le-free perfo rmance. N evertheless, the display may have cosmetic imperfection s that appear as small bright or dark spots. This is commo n to all LCD displays used in products supplied by all ve ...

Manufacturer HP (Hewlett-Packard) Category Computer Monitor

Documents that we receive from a manufacturer of a HP (Hewlett-Packard) L2206TM can be divided into several groups. They are, among others:
- HP (Hewlett-Packard) technical drawings
- L2206TM manuals
- HP (Hewlett-Packard) product data sheets
- information booklets
- or energy labels HP (Hewlett-Packard) L2206TM
All of them are important, but the most important information from the point of view of use of the device are in the user manual HP (Hewlett-Packard) L2206TM.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals HP (Hewlett-Packard) L2206TM, service manual, brief instructions and user manuals HP (Hewlett-Packard) L2206TM. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product HP (Hewlett-Packard) L2206TM.

Similar manuals

A complete manual for the device HP (Hewlett-Packard) L2206TM, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use HP (Hewlett-Packard) L2206TM by users. Manuals are usually written by a technical writer, but in a language understandable to all users of HP (Hewlett-Packard) L2206TM.

A complete HP (Hewlett-Packard) manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual HP (Hewlett-Packard) L2206TM - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the HP (Hewlett-Packard) L2206TM, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the HP (Hewlett-Packard) L2206TM, that we can find in the current document
3. Tips how to use the basic functions of the device HP (Hewlett-Packard) L2206TM - which should help us in our first steps of using HP (Hewlett-Packard) L2206TM
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with HP (Hewlett-Packard) L2206TM
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of HP (Hewlett-Packard) L2206TM in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning HP (Hewlett-Packard) L2206TM?

Use the form below

If you did not solve your problem by using a manual HP (Hewlett-Packard) L2206TM, ask a question using the form below. If a user had a similar problem with HP (Hewlett-Packard) L2206TM it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)