English dropdown-ico

Manual Quadra-Fire SAPPHIRE-D-CSB

52 pages 4.09 mb
Download

Go to site of 52

Summary
  • Quadra-Fire SAPPHIRE-D-CSB - page 1

    R SAPPHIRE GAS ST OVE DIRECT VENT ROOM HEA TER Owner ’ s Manual Installation and Operation Model: SAPPHIRE-MBK SAPPHIRE-D-MBK SAPPHIRE-D-PMH SAPPHIRE-D-CSB • Do not store or use gasoline or other fl am- mable vapors and liquids in the vicinity of this or any other appliance. • What to do if you smell gas - Do not try to light any appliance. ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 2

    2 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 Hearth & Home T echnologies welcomes you to our tradition of excellence! In choosing a Quadra-Fire appliance, you have our assurance of commitment to quality , durability , and performance. This commitment begins with our research of the market, including ‘V oice of the Customer ’ c ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 3

    3 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 Safety Alert Key: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury . • W ARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury . • CAUTION! Indicates a hazardous situation which, if n ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 4

    4 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 1 Listing and Code Approvals The product is listed to ANSI standards for “V ented Gas Appliance Heaters” and applicable sections of “Gas Burning Heating Appliances for Manufactured Homes and Recre- ational V ehicles” and "Gas Fired Appliances for use at High Altitudes". A. ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 5

    5 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 NOTE: The following requirements reference various Massachusetts and national codes not contained in this document. For all side wall horizontally vented gas fueled equipment installed in every dwelling, building or structure used in whole or in part for residential purposes, including thos ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 6

    6 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 2 Getting Started Check building codes prior to installation. • Installation MUST comply with local, regional, state and national codes and regulations. • Consult local building, fi re of fi cials or authorities having jurisdiction about restrictions, installation inspection, and perm ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 7

    7 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 3 Appliance Location and Clearances A. Selecting Appliance Location NOTE: · Illustrations re fl ect typical installations and are FOR DESIGN PURPOSES ONL Y . · Illustrations/diagrams are not drawn to scale. · Actual installation may vary due to individual design preference. When selecti ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 8

    8 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 4 T ermination Locations A. V ent T ermination Minimum Clearances Figure 4.2 Staggered T ermination Caps Figure 4.1 T ermination Clearances Figure 4.3 speci fi es minimum vent heights for various pitched roofs. Figure 4.3 Minimum Height from Roof to Lowest Discharge Failure to keep insulat ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 9

    9 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 Figure 4.4 V = VENT TERMINAL X = AIR SUPPL Y INLET = AREA WHERE TERMINAL IS NOT PERMITTED A = 12 inche s ............. clearances above grade , veran- da, porch, deck or balcony B = 12 inches ............ cl e a r ances to window or door that may be opened, or to per- manently closed window ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 10

    10 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 5 V ent Information A. V enting Components B. Use of Elbows In order to comply with applicable codes and product warranties, use only following venting components: • Hearth & Home T echnologies (HHT) • Security Chimney's Secure V ent Chimney System • Selkirk Metalbestos • ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 11

    11 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 INDIVIDUAL INST ALLA TIONS MA Y V ARY . Percentage closed based on full range of the fl ue restric- tor travel. D. How to Use the V ent Graph 1. Measure the distance from the top of appliance to the center of the 90° elbow . On the graph below , draw a horizontal line from that measureme ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 12

    12 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 F . Horizontal T ermination 45° Elbow 3 in. (76mm) Clearance from appliance corner to combustible wall 3 in. (76mm) Clearance from appliance corner t o combustible wall Wall Thimble/Heat Shield Wall Thimble/ Heat Shield Wall Thimble Cover Pipe Length Pipe Length T ermination Cap Center Li ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 13

    13 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 Step 3. For installations using a round support box/wall thimble (check pipe manufacturer's instructions), mark the wall for a 10 in. x 10 in. (254mm x 254mm) square hole. The center of the square hole should line up with the center line of the horizontal pipe, as shown in Figure 5.6 ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 14

    14 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 Step 5. Place the wall thimble cover over the pipe assembly and slide the appliance and vent assembly towards the wall, carefully inserting the vent pipe into the vent termination cap assembly . It is important that the vent pipe extend into the vent termination cap a sufficient distance s ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 15

    15 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 V ertical T ermination Cap Storm Collar Flashing Firestop Pipe Length Support Box Step 1. Check the installation instructions for required 1 in. (25mm) clearances (air space) to combustibles when passing through ceilings, walls, roofs, enclosures, attic rafters, or other nearby combustible ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 16

    16 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 Plumber ’s T ape connected to W all Strap W all Strap T wo 45˚ Elbows Figure 5.13 Step 4. Assemble the desired lengths of pipe and elbows necessary to reach from the appliance up through the round support box. Ensure that all pipe and elbow connections are in their fully twist-locked po ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 17

    17 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 Step 8. Slip the storm collar over the pipe, and push it down to the top of the flashing Figure 5.16 . Use non-hardening sealant above and below the joint between the storm collar and the pipe. Optional High Wind T ermination Cap Secure Flashing with Non-Hardening Sealant and Roofing Nails ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 18

    18 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 2. Cathedral Ceiling Level Cathedral Ceiling Support Box 2 in. (51mm) Min. below finished ceiling Cut hole 1/8 in. (3mm) greater in size than pattern of support box as it is projected onto roof line Figure 5.18 Figure 5.19 Step 1. Follow installation Steps 1 and 2 under vertical installati ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 19

    19 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 T ermination Cap Existing Metal Chimney System T op Adaptor Flashing 4 in. (102mm) Flex Pipe Retro Connector Direct V ent Pipe 3. Class A Metal Chimney Figure 5.21 High Wind T ermination Cap Sheet Metal Screws Drill Four 1/8 in. (3mm) Diamater Holes Figure 5.23 Figure 5.24 Step 4. Pass the ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 20

    20 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 Chimney Liner T ermination Cap Co-Axial to Co-Linear Connector 30 ft. (9m) of 3 in. (76mm) Flex Liner Exhaust Section (Cut to length) Pipe Length Optional 4 ft. (1m) of 3 in. (76mm) Flex Liner Air Intake Section The chimney must be sealed from the 4 ft. (1m) section to termination using a ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 21

    21 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 10 in. x 10 in. (254mm x 254mm) framed opening in wall Studwall Masonry Chimney Retro Connector (4) Masonry Bolts (Not Included) Wall Thimble Cover Cut and bend flashing as needed to fit Sealant adhesive Figure 5.26 Figure 5.27 Step 1. Before cutting any holes, assemble the desired section ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 22

    22 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 High Wind T ermination Cap T op Adaptor (3) Sheet Metal Screws Flashing Step 9. Attach the flex to the retro connector. Use three sheet metal screws to attach the flex liner to the connector. Mount the retro connector to the masonry wall using masonry bolts. Figure 5.30 . Redrill larger ho ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 23

    23 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 6 Gas Information A. Fuel Conversions Before making gas connections ensure that the appliance being installed is compatible with the available gas type. Any natural or propane gas conversions necessary to meet the appliance and locality needs must be made by a quali- fi ed technician usin ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 24

    24 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 Fire Risk. Explosion Risk. • If the information in these instructions is not followed exactly , a fi re, explosion or production of carbon monoxide may result causing property damage, personal injury or loss of life. • The quali fi ed service agency is responsible for the proper inst ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 25

    25 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 B. Gas Pressures If the pressure is not suf fi cient, ensure: 1) The piping used is large enough. 2) The supply regulator is adequately adjusted. 3) That the total gas load for the residence does not exceed the amount supplied. The regulator that attaches directly to the residence inlet o ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 26

    26 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 • A small amount of air will be in the gas supply lines. When fi rst lighting appliance it will take a short time for air to purge from the lines. When purging is complete the appli- ance will light and operate normally . Air only needs to be purged again if the gas valve has been turne ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 27

    27 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 7 Electrical Information A. Recommendation for Wire See B5 below for recommended maximum lead length (two wire) when using wall thermostat/switch. B. Connecting to the Appliance NOTE: This appliance must be electrically wired and grounded in accordance with local codes or , in the absence ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 28

    28 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 Figure 7.1 CAUTION Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation. V erify proper operation after servicing. Shock hazard. • Replace damaged wire with type 105 O C rated wire. • Wire must have high temperature in ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 29

    29 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 8 Appliance Setup A. Remove Shipping Materials Remove shipping materials from inside or underneath the fi rebox. Kit Contents: Rear vent grille, NG ori fi ce (.098), LP ori fi ce (.059) T ools Required: Power drill; #2 Phillips bit; high-temp sili- cone sealant (optional.) C. T op to Re ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 30

    30 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 D. Baf fl e Installation/Adjustment BAFFLE BAFFLE RET AINERS Figure 8.7 Position baf fl e on top of baf fl e retainers on left and right sides. Centering baf fl e on retainers, ensure that the dark painted bevelled edge and darker painted baf fl e bottom side faces toward the front vi ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 31

    31 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 G. Positioning the Logs While still breakable, the logs do not become fragile until after the appliance is burned and they have cured. After curing, any handling must be done with care as breakage can easily occur . PLEASE NOTE: Logs have been designed to work specifically with the burner ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 32

    32 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 Handle glass assembly with care. CAUTION • Inspect the gasket to ensure it is undamaged. • Inspect the glass for cracks, chips or scratches. • Do NOT strike, slam or scratch glass. • Do NOT operate appliance with glass door removed, cracked, broken or scratched. • Replace glass a ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 33

    33 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 Figure 8.20 Install speed control to switch panel. Attach knob to speed control. Figure 8.21 Cut out the rheostat/speed control cover on rear shield. Re-install rear shield. Connect the blower to the power supply and turn on the gas supply . NOTE: This blower utilizes a snap disc to contro ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 34

    34 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 See vent graph for recommendations on page 1 1 before you begin your adjustment. If your installation falls within the range of the gray shaded area of graph, it may be necessary to make an adjustment to the vertical fuel restrictor to improve the flame appearance in your appliance. 2. Rea ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 35

    35 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 9 Operating Instructions A. Before Lighting Appliance Read this entire manual prior to using the appliance. Failure to follow the instructions may result in property damage, bodily injury, or even death. Glass door must be in place when appliance is operating. Risk of: • Combustion Fumes ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 36

    36 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 C. Lighting Appliance 1. Set the thermostat to lowest setting. 2. T urn off all electric power to the appliance if service is to be performed. 3. Push in gas control knob slightly and turn clockwise to "OFF" position. FOR YOUR SAFETY READ BEFORE LIGHTING FOR YOUR SAFETY READ BEFO ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 37

    37 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 D. After Appliance is Lit When you light your appliance, you may notice that it pro- duces heat which does have an associated odor or smell. If you feel this odor is excessive it may require the initial three to four hour continuous burn on high followed by a second burn up to 12 hours to ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 38

    38 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 10 T roubleshooting With proper installation, operation, and maintenance your gas appliance will provide years of trouble-free service. If you do experience a problem, this troubleshooting guide will assist a quali fi ed service person in the diagnosis of a problem and the corrective acti ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 39

    39 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 Symptom Possible Cause Corrective Action 3. (Continued) c. Defective valve. T urn the valve knob to the ON position. Place the ON/OFF switch in the ON position. Check the millivolt meter at the thermopile terminals. The millivolt meter should read greater than 125mV . If the reading is acc ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 40

    40 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 11 Maintaining and Servicing Y our Appliance Although the frequency of your appliance servicing and maintenance will depend on use and the type of installation, a quali fi ed service technician should perform an appliance check-up at the beginning of each heating season. Risk of injury or ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 41

    41 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 Inspect Maintenance T asks Doors 1. Inspect for scratches, dents or other damage and repair as necessary . 2. V erify no obstructions to air fl ow . 3. V erify maintenance of proper clearance to combustible household objects. Gasket Seal, Glass Assembly and Glass 1. Inspect gasket seal an ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 42

    42 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 12 Reference Materials A. Appliance Dimension Diagram Dimensions are actual appliance dimensions. Use for reference only . For clearances refer to Section 3. 21-7/8 in. (556mm) 21-7/8 in. (556mm) 27-5/8 in. (701mm) 16-1/4 in. (414mm) 18 in. (457mm) 20-3/4 in. (526mm) 21-7/8 in. (556mm) 8-1 ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 43

    43 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 B. V ent Components Diagram Figure 12.2 SL-D Series V ent Components 4 in. (102 mm) inner pipe 6-5/8 in. (168 mm) outer pipe 9-1/4 in. (235mm) 6-1/2 in. (165mm) 6-5/8 in. (168mm) 17-24 in. (432-610mm) 1 1-3/4 in. (298mm) 5-3/4 in. (146mm) 6-5/8 in. (168mm) 6-3/8 in. (162mm) 6-1/2 in. (165m ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 44

    44 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 C. V ent Components List Description HHT SLP M= Multi Pack (6) Simpson Dura-V ent DirectV ent Pro 4” Pipe Length, Galvanized SLP4M - 4” Pipe Length, Black SLP4-BK - 6” Pipe Length, Galvanized SLP6M 46-DV A-06 6” Pipe Length, Black SLP6-BK 46-DV A-06B 9” Pipe Length, Galvanized - ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 45

    45 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 C. V ent Components List (continued) * Stove Adaptor Kit (V ertical Cap Kit) Includes 30’-4” À ex, adapters, wall thimble, masonry , ZC À ashing, 991DA vertical cap. NOTES: 1 Before cutting any holes check pipe manufacturers current instructions. 2 Each pipe manufacturer has their ow ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 46

    46 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 Gas Stove SAPPHIRE-D R D. Service Parts 1 2 3 Log Set Assembly Part number list on following page. SAPPHIRE-D-CSB, SAPPHIRE-D-MBK, SAPPHIRE-D-PMH, SAPPHIRE-D-CWL (6/10-3/1 1) 43 44 47 46 45 4 5 6 12 13 14 15 16 17 18 19 20 21 22 26 27 28 25 29 30 31 32 33 36 35 34 37 38 40 39 41 42 7 8 9 1 ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 47

    47 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked at Depot ITEM DESCRIPTION COMMENTS P ART NUMBER Log S ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 48

    48 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked at Depot ITEM DESCRIPTION COMMENTS P ART NUMBER 23 Do ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 49

    49 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked at Depot ITEM DESCRIPTION COMMENTS P ART NUMBER Compo ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 50

    50 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 E. Limited Lifetime W arranty 4021-645C 12-29-10 Page 1 of 2 Hearth & Home T echnologies Inc. LIMITED LIFETIME W ARRANTY Hearth & Home T echnologies Inc., on behalf of its hearth brands (”HHT”), extends the following warranty for HHT gas, wood, pellet, coal and electric hearth ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 51

    51 Quadra-Fire • Sapphire • 7055-1 16 Rev . D • 6/1 1 E. Limited Lifetime W arranty (continued) 4021-645C 12-29-10 Page 2 of 2 W ARRANTY CONDITIONS:  7KLVZDUUDQWRQOFRYHUV++7DSSOLDQFHVWKDWDUHSXUFKDVHGW KURXJKDQ++7 DXWKRUL]HGGHDOHURUGLVWULEXWRU  $ OLVWRI ++7DXWKRUL]HGGHDO ...

  • Quadra-Fire SAPPHIRE-D-CSB - page 52

    52 R Date purchased/installed: Serial Number: Location on appliance: Dealership purchased from: Dealer phone: Notes: W e recommend that you record the following pertinent information for your SAPPHIRE-D GAS ST OVE DO NOT DISCARD THIS MANUAL NOTICE • Important operating and maintenance instructions included. • Leave this manual with party respon ...

Manufacturer Quadra-Fire Category Stove

Documents that we receive from a manufacturer of a Quadra-Fire SAPPHIRE-D-CSB can be divided into several groups. They are, among others:
- Quadra-Fire technical drawings
- SAPPHIRE-D-CSB manuals
- Quadra-Fire product data sheets
- information booklets
- or energy labels Quadra-Fire SAPPHIRE-D-CSB
All of them are important, but the most important information from the point of view of use of the device are in the user manual Quadra-Fire SAPPHIRE-D-CSB.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Quadra-Fire SAPPHIRE-D-CSB, service manual, brief instructions and user manuals Quadra-Fire SAPPHIRE-D-CSB. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Quadra-Fire SAPPHIRE-D-CSB.

Similar manuals

A complete manual for the device Quadra-Fire SAPPHIRE-D-CSB, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Quadra-Fire SAPPHIRE-D-CSB by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Quadra-Fire SAPPHIRE-D-CSB.

A complete Quadra-Fire manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Quadra-Fire SAPPHIRE-D-CSB - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Quadra-Fire SAPPHIRE-D-CSB, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Quadra-Fire SAPPHIRE-D-CSB, that we can find in the current document
3. Tips how to use the basic functions of the device Quadra-Fire SAPPHIRE-D-CSB - which should help us in our first steps of using Quadra-Fire SAPPHIRE-D-CSB
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Quadra-Fire SAPPHIRE-D-CSB
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Quadra-Fire SAPPHIRE-D-CSB in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Quadra-Fire SAPPHIRE-D-CSB?

Use the form below

If you did not solve your problem by using a manual Quadra-Fire SAPPHIRE-D-CSB, ask a question using the form below. If a user had a similar problem with Quadra-Fire SAPPHIRE-D-CSB it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)