English dropdown-ico

Manual ATEN Technology AS-811S

22 pages 0.4 mb
Download

Go to site of 22

Summary
  • ATEN Technology AS-811S - page 1

    AS/2 AUTO SWITCH AS-411 P / AS-81 1P / AS-41 1 S / AS-81 1S User’s Manual 0 Copyright 1990 ATENB International CO., LTD. Manual part NO. PAPE-0092-200 ...

  • ATEN Technology AS-811S - page 2

    NOTICE This manual is written for the Auto Switch products of AS-41 1 P/41 1 S and AS-81 1P/811S. Most of the operations of these models are the some, and differences will be specified. The last character ‘P’ and ‘S’ of each model’s string means the parallel interface and the serial interface respectively. In this manual, ‘AS/2’ is us ...

  • ATEN Technology AS-811S - page 3

    TABLE OF CONTENTS FUNCTION OVERVIEW l-l Introduction .................................................................................... 1 l-2 Function Specifications ................................................................ 4 1-3 Product Limitation .......................................................................... 6 INSTALLATION 2- ...

  • ATEN Technology AS-811S - page 4

    AS/2 Auto Switch FUNCTION OVERVIEW 1 FUNCTION OVERVIEW l-1 INTRODUCTION The AS/2 is a high performance and low cost printer sharing device which operates in either auto switching mode or manual switching mode. The AS/2 allows up to four or eight source devices to share one common destination devices. In the auto switching mode the AS/2 automaticall ...

  • ATEN Technology AS-811S - page 5

    ...

  • ATEN Technology AS-811S - page 6

    ...

  • ATEN Technology AS-811S - page 7

    FUNCTION OVERVIEW AS/2 Auto Switch 1-2 FUNCTION SPECIFICATIONS PARALLEL MODEL FUNCTIONS I AS-41 1 P I AS-81 1 P Power Supply / DC 9V, 100mA* / DC 9V, 100mA . . - Cable Length I I 6M CONNECTOR INPUT 4 CENTRONICS 8 CENTRONICS (DB-25)Female OUTPUT 1 CENTRONICS 1 CENTRONICS Input Status 4 8 LED Printer Ready 1 1 Manual 1 1 Buffer Care (Extended) 256K/1 ...

  • ATEN Technology AS-811S - page 8

    AS/2 Auto Switch FUNCTION OVERVIEW SERIAL MODEL FUNCTIONS AS-41 1 S AS-81 1 s Power Supply AC 9V, 300mA (spare) Cable Length 15M CONNECTOR INPUT (Female) 4 RS-232C (DCE) 8 RS-232C (DCE) (DB-25) OUTPUT (Male) 1 RS-232C (DTE) 1 RS-232C (DTE) 1 Input Status I 4 I 8 LED Power Manual Input Arbitration 1 1 1 1 First Come, First Serve Function Key Manual ...

  • ATEN Technology AS-811S - page 9

    FUNCTION OVERVIEW AS/2 Auto Switch 1-3 PRODUCT LIMITATION AS/2 is a well designed quality product. Its maximum performance and limitation is described as follows. ‘Hardware’ Handshaking, Xon-Xofl l AS/2's Manual Switching Mode is shaking Modes. l AS/2's Auto Switching Mode is only suitable for devices which use f Handshaking is not al ...

  • ATEN Technology AS-811S - page 10

    ...

  • ATEN Technology AS-811S - page 11

    ...

  • ATEN Technology AS-811S - page 12

    ...

  • ATEN Technology AS-811S - page 13

    ...

  • ATEN Technology AS-811S - page 14

    ...

  • ATEN Technology AS-811S - page 15

    ...

  • ATEN Technology AS-811S - page 16

    AS/2 Auto Switch INSTALLATION 2-3 AS Buffer Card Installation AS buffer card has 64K, 256K o r 1M bytes of memory and is used to expand the buffer memory of AS-4 1 1 P and AS-8 1 1 P auto switches. 1) 2) 3) 4) 5) Unscrew the 4 screws on both sides of the case. Lift up the upper case. Find the 14 x 2 gold pin connector on the PCB for AS-41 1 P users ...

  • ATEN Technology AS-811S - page 17

    INSTALLATION AS/2 Auto Switch Fig 2-3-2 The AS-81 1 P’s Buffer Card Installation 14 User’s Manual ...

  • ATEN Technology AS-811S - page 18

    AS/2 Auto Switch POWER ON PROCEDURE 3 POWER ON PROCEDURE 3-1 1) POWER ON PROCEDURE To reset the AS-81 1 P and AS-41 1 P (w/ buffer card), turn off/on power switch. AS-41 1 P (w/o buffer card) can be reset by recycling printer power while it is hooked to a printer. 2) After reset, the input channel’s service LEDs are on. Meanwhile, the AS/2 is rea ...

  • ATEN Technology AS-811S - page 19

    POWER ON PROCEDURE AS/2 Auto Switch 3 ) When the ‘READY’ LED turns off, it indicates Connectors are not properly connected, Printer(or output device) is not switched on, Printer is not in ON-LINE status, or, Printer is out of paper. If buffer card installed for output ‘READY’ LED reflects buffer readiness. 4 ) When the AS/2 is serving a cer ...

  • ATEN Technology AS-811S - page 20

    APPENDIX A TROUBLE SHOOTING PROBLEM SOLUTIONS LED fails to light up Check if power is turned ON or not Failure of data 1. Check if the Connector of each cable is well transmission plugged or not. 2. Check if PC is turned ON or not. 3. Check if PRINTER is turned ON or not. 4. Check if paper for PRINTER is well prepared or not. 5. Check if Print comm ...

  • ATEN Technology AS-811S - page 21

    APPENDIX B CENTRONICS INTERFACE TIMING CHART Centronics Interface Timing Chart I DATA , I I I I 1 - ACK () -_____-___---______________ (min) 18 User’s Manual ...

  • ATEN Technology AS-811S - page 22

    APPENDIX C PREVENTING RADIO&TV INTERFERENCE Warning this equipment generates, uses and radiates radio frequency energy and if not installed and used in accordance with the instruction manual may cause interference to radio and television reception. It has been tested and found to comply with the limits for a Class A computing device in accordan ...

Manufacturer ATEN Technology Category Switch

Documents that we receive from a manufacturer of a ATEN Technology AS-811S can be divided into several groups. They are, among others:
- ATEN Technology technical drawings
- AS-811S manuals
- ATEN Technology product data sheets
- information booklets
- or energy labels ATEN Technology AS-811S
All of them are important, but the most important information from the point of view of use of the device are in the user manual ATEN Technology AS-811S.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals ATEN Technology AS-811S, service manual, brief instructions and user manuals ATEN Technology AS-811S. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product ATEN Technology AS-811S.

Similar manuals

A complete manual for the device ATEN Technology AS-811S, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use ATEN Technology AS-811S by users. Manuals are usually written by a technical writer, but in a language understandable to all users of ATEN Technology AS-811S.

A complete ATEN Technology manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual ATEN Technology AS-811S - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the ATEN Technology AS-811S, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the ATEN Technology AS-811S, that we can find in the current document
3. Tips how to use the basic functions of the device ATEN Technology AS-811S - which should help us in our first steps of using ATEN Technology AS-811S
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with ATEN Technology AS-811S
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of ATEN Technology AS-811S in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning ATEN Technology AS-811S?

Use the form below

If you did not solve your problem by using a manual ATEN Technology AS-811S, ask a question using the form below. If a user had a similar problem with ATEN Technology AS-811S it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)