Manual Dimplex DF2608

19 pages 0.17 mb
Download

Go to site of 19

Summary
  • Dimplex DF2608 - page 1

    Quality checke d by: Valued Customer, We are pleased that you have chosen to purchase an electric fireplace by Dimplex North America Ltd. Over the years, valuable memories will occur around the warmth and comfort of your hearth. Thank you for allowing our product to be the backdrop for those special moments. 7208680100R01 PRACTICAL USER’S GUIDE F ...

  • Dimplex DF2608 - page 2

    CONTENTS P AGE Import ant Instructions P AGE Fireplace Inst allation P AGE Operation P AGE Maintenance P AGE W arranty ...

  • Dimplex DF2608 - page 3

    3 Quick Reference Guide for the Dimplex Electric Fireplace 1. Prior to the first use of the fireplace verify the following: • Are the circuit breakers for the socket the unit uses on? • Are the light bulbs in your fireplace loose? (to check, follow the instructions for replacing the light bulbs under the maintenance section of this manual) 2. T ...

  • Dimplex DF2608 - page 4

    1 IMPORT ANT INSTRUCTIONS Please Retain This User’s Guide for Future Reference 1. Read all instructions before using the electric fireplace. 2. This fireplace is hot when in use. T o avoid burns, do not let bare skin touch hot surfaces. The trim around the heater outlet becomes hot during heater operation. 3. Extreme caution is necessary when any ...

  • Dimplex DF2608 - page 5

    CAUTION RISK OF ELECTRIC SHO CK DO NOT OPEN NO USER - SERVICEABLE P ARTS INSIDE 2 manner . Do not use on sof t surfaces, like a bed, where openings may become blocked. 18. All electrical heaters have hot and arching or sp arking parts inside. Do not use in areas where gasoline, paint, or flammable liquids are used or stored or where the unit will b ...

  • Dimplex DF2608 - page 6

    Model Number 3 Model Number W arning Label Import ant Instructions If you have any questions regarding our products please have the product model number and serial numbers available upon calling Dimplex customer service or technical support. T o locate the model and serial number labels see below . Record the model number , serial number on the fro ...

  • Dimplex DF2608 - page 7

    4 Site Selection and Prep aration This section provides instructions for selecting a location and preparing the site to install the fireplace into your Dimplex mantel surround. 1. Select a suitable location that is not susceptible to moisture and is away from drapes, furniture and high traffic. 2. For ease of electrical hook up you may wish to loca ...

  • Dimplex DF2608 - page 8

    5 Fireplace Inst allation Install the fireplace assembly into the mantel. (refer to mantel assembly instructions) NOTE A 15 AMP , 120 VOL T circuit is required. A dedicated circuit is preferred but not essential in all cases. A dedicated circuit will be required if after installation the circuit breaker trips or fuse blows on a regular basis when t ...

  • Dimplex DF2608 - page 9

    6 Option #1 The power cord can be run from behind the trim and along the wall to an outlet near the fireplace. Option #2 A new outlet can be installed inside the framing construction. Plug the unit into a 15Amp/120V olt outlet. If the cord does not reach, you may use an extension cord rated for a minimum of 1875 watts . Existing Fireplace: 1. Seal ...

  • Dimplex DF2608 - page 10

    7 Resetting the T emperature Cutoff Switch This unit is equipped with a thermostat which controls the temperature of the room by turning the heater on and off. A E B C D Operation Electric Fireplace Manual Control The manual controls for the fireplace are behind the access panel located at the bottom of the fireplace. A. Three position ON/OFF switc ...

  • Dimplex DF2608 - page 11

    8 The heater is protected with a safety device to prevent overheating. Should the heater overheat, an automatic cut out will turn the heater off and it will not come back on without being reset. It can be reset by switching the ON/OFF SWITCH to OFF and waiting 5 minutes before switching the unit back on. CAUTION If you need to continuously reset th ...

  • Dimplex DF2608 - page 12

    9 Maintenance W ARNING Disconnect the power before attempting any maintenance or cleaning to reduce the risk of fire, electric shock or damage to persons. Light Bulb Replacement Allow at least 5 minutes for the light bulbs to cool before touching them to avoid accidental burning of the skin. The light bulbs need to be replaced when you notice a dar ...

  • Dimplex DF2608 - page 13

    10 T o access the lower light bulb area: 1. Slide fireplace out of mantel 2. Lay unit on it’s back for safe removal of front glass. 3. Remove 4 Phillips screws from the right side of trim. 4. Slide glass to right side of fireplace to remove. 5. Pull the front edge of the plastic ember bed or plastic grate up and forward until the rear tab release ...

  • Dimplex DF2608 - page 14

    1 1 NOTE Ensure the logset is installed tightly under the back ledge to prevent light leakage. Upper Light Bulb Requirements Quantity of 2 clear chandelier or candelabra bulbs with an E- 12 (small) socket base, 15 watt rating. DO NOT EXCEED 25 W A TTS PER BULB T o access the upper light bulb area: 1. Slide fireplace out of mantel 2. Lay unit on it? ...

  • Dimplex DF2608 - page 15

    12 T wo Y ear Limited W arranty Products to which this limited warranty applies This limited warranty applies to your newly purchased Dimplex electric fireplace. This limited warranty applies only to purchases made in any province of Canada except for Y ukon T erritory , Nunavut, or Northwest T erritories or in any of the 50 S t ates of the USA (an ...

  • Dimplex DF2608 - page 16

    13 Dimplex fireplace surrounds (mantels) and trims covered by this limited warranty have been tested and inspected prior to shipment and, subject to the provisions of this warranty , Dimplex warrants such products to be free from defects in material and workmanship for a period of 1 year from the date of first purchase of such products. The limited ...

  • Dimplex DF2608 - page 17

    14 What Dimplex will do in the event of a defect In the event a product or part covered by this limited warranty is proven to be defective in material or workmanship during (i) the 2 year limited warranty period for products other than fireplace surrounds (mantels) and trims, and (ii) the 1 year limited warranty period for surrounds (mantels) and t ...

  • Dimplex DF2608 - page 18

    15 • For surrounds (mantels) and trims, this 1 year limited warranty does not entitle the purchaser to on-site or in- house warranty services. The purchaser is responsible for removal and transportation of the surrounds (mantels) and trims (and any repaired or replacement product or part) to and from the authorized dealer’s or service agent’s ...

  • Dimplex DF2608 - page 19

    16 SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMIT A TION OF INCIDENT AL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMIT A TION OR EXCLUSION MA Y NOT APPL Y T O THE PURCHASER. How State and Provincial law apply This limited warranty gives you specific legal rights, and you may also have other rights which vary from jurisdiction to jurisdiction. ...

Manufacturer Dimplex Category Fan

Documents that we receive from a manufacturer of a Dimplex DF2608 can be divided into several groups. They are, among others:
- Dimplex technical drawings
- DF2608 manuals
- Dimplex product data sheets
- information booklets
- or energy labels Dimplex DF2608
All of them are important, but the most important information from the point of view of use of the device are in the user manual Dimplex DF2608.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Dimplex DF2608, service manual, brief instructions and user manuals Dimplex DF2608. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Dimplex DF2608.

Similar manuals

A complete manual for the device Dimplex DF2608, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Dimplex DF2608 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Dimplex DF2608.

A complete Dimplex manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Dimplex DF2608 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Dimplex DF2608, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Dimplex DF2608, that we can find in the current document
3. Tips how to use the basic functions of the device Dimplex DF2608 - which should help us in our first steps of using Dimplex DF2608
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Dimplex DF2608
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Dimplex DF2608 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Dimplex DF2608?

Use the form below

If you did not solve your problem by using a manual Dimplex DF2608, ask a question using the form below. If a user had a similar problem with Dimplex DF2608 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)