English dropdown-ico

Manual Dynacord DPP 4012

9 pages 0.34 mb
Download

Go to site of 9

Summary
  • Dynacord DPP 4012 - page 1

    DPP 4004 / DPP 4012 24V POWER SUPPLY - RACK UNIT Performance Features • 19" rack size with 2 HU • primary sync switch-mode power supply; supports any 24 VDC modules in PA-systems • covered mains switch • status indicator LEDs (mains and battery) • smooth initial current inrush • short circuit protected • forced ventilation • ma ...

  • Dynacord DPP 4012 - page 2

    CONTENTS Performance Features . . . . . . . . . . . . . . . . . . . . . . . . . 11 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . 13 Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Rear View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Utilization . . . . . . . . ...

  • Dynacord DPP 4012 - page 3

    The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to ale ...

  • Dynacord DPP 4012 - page 4

    1.) covered mains switch 2.) mains LED-indicator (off, when the mains switch is not engaged) 3.) battery LED-indicator (off, when the mains switch is not engaged) 4.) mains input connector 5.) mains fuse (input connector) 6.) mains output connector 7.) mains fuse (output connector) 8.) ground-lift switch 9.) DC-output via flat-connector: +24 V / 4 ...

  • Dynacord DPP 4012 - page 5

    1. Utilization The switch-mode power supply rack units DPP4004/4012 are meant for the incorporation into 19" rack shelf systems and serve to supply PA-system installations with the operational voltage of 24 V. The switch-mode power supplies DPP4004/4012 can be operated as single units, together with th e PA-system PROMATRIX, or battery-powered ...

  • Dynacord DPP 4012 - page 6

    capacitive loads connected. This output is controlled by the inputs ON/OFF (TOGGLE) (pin 1 of the remote control connector) or ON/OFF (MODULES) (pin 2). If the ON/OFF (MODULES) input is connected to the ground potential, the MODULES OUT output is constantly activated; otherwise it is cons tantly deactivated. The input is controlled from the DPM 400 ...

  • Dynacord DPP 4012 - page 7

    4. Mains Voltage Selection (only to be carried out by a qualified service technician) After adjusting the mains voltage, operating the DPP 4004/4012 power supplies with 115 V is also possible. The adjustment has to be carried out before the operation: - Remove the cover plate. - Insert the flat wire bridge on the printed board assembly 86245 into t ...

  • Dynacord DPP 4012 - page 8

    5. Remote Control Connector figure 1: figure 2: pin assignment of the remote control plug example for a remotely controlled application 1 ON/OFF (TOGGLE) INPUT ON/OFF function of the supply output for the modules MODULE OUT through the pulse contact to the negative potential. Only functions when pin 11 carries an analogous supply voltage and when t ...

  • Dynacord DPP 4012 - page 9

    SPECIFICATIONS DPP4004 DPP4012 Mains power supply Operational voltage 230 VAC ±10 % 230 VAC ±10 % internally selectable through bridging 115 VAC ±10 % 115 VAC ±10 % Mains frequency range 50 … 60 Hz 50 … 60 Hz Power consumption in idling mode  20 VA  20 VA Power consumption at nominal load  120 VA  360 VA Battery powe ...

Manufacturer Dynacord Category Power Supply

Documents that we receive from a manufacturer of a Dynacord DPP 4012 can be divided into several groups. They are, among others:
- Dynacord technical drawings
- DPP 4012 manuals
- Dynacord product data sheets
- information booklets
- or energy labels Dynacord DPP 4012
All of them are important, but the most important information from the point of view of use of the device are in the user manual Dynacord DPP 4012.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Dynacord DPP 4012, service manual, brief instructions and user manuals Dynacord DPP 4012. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Dynacord DPP 4012.

Similar manuals

A complete manual for the device Dynacord DPP 4012, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Dynacord DPP 4012 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Dynacord DPP 4012.

A complete Dynacord manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Dynacord DPP 4012 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Dynacord DPP 4012, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Dynacord DPP 4012, that we can find in the current document
3. Tips how to use the basic functions of the device Dynacord DPP 4012 - which should help us in our first steps of using Dynacord DPP 4012
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Dynacord DPP 4012
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Dynacord DPP 4012 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Dynacord DPP 4012?

Use the form below

If you did not solve your problem by using a manual Dynacord DPP 4012, ask a question using the form below. If a user had a similar problem with Dynacord DPP 4012 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)