English dropdown-ico

Manual EnGenius ENH900EXT

68 pages Not applicable
Download

Go to site of 68

Summary
  • EnGenius ENH900EXT - page 1

    User M anual Business Solutions Dual Band L ong Range Wir eless N900 Out door A ccess P oin t ENH900EXT version 1.0 ...

  • EnGenius ENH900EXT - page 2

    2 IMPORTANT To install this Access Point please refer to the Quick Installation Guide included in the product packaging. ...

  • EnGenius ENH900EXT - page 3

    3 Chapter 1 Product Overview............................................... 4 Key Features/Introduction........................................................ 5 System Requirements............................................................... 6 Package Contents......................................................................... 7  Technic ...

  • EnGenius ENH900EXT - page 4

    4 Chapter 1 Product Overview ...

  • EnGenius ENH900EXT - page 5

    5 Maximum data rates are based on IEEE 802.11 standar ds. Actual throughput and range may v ar y depending on many factors including envir onmental conditions, distance between devices, radio in ter ferenc e in the operating environment , and mix of devices in the network . F eatures and specications subject to change without notice . T rademark ...

  • EnGenius ENH900EXT - page 6

    6 in a campus setting using the 5 GHz band as a backhaul to provide multiple 2.4 GHz wireless cells for computers or mobile devices in common outdoor areas. The ENH900EXT is easy to install in virtually any location with its included PoE (Power over Ethernet) injector for quick outdoor installation. The ENH900EXT enables ...

  • EnGenius ENH900EXT - page 7

    7 Package Contents The EN H90 0EX T package contains the following items:* • ENH900EXTAccessPoint • 3detachable5dBi2.4GHzOmni-directionalAntenna • 3detachable7dBi5GHzOmni-directionalAntenna • PowerAdapter(48V/0.8A) • PoEInjector(EPE-48GR) • GroundingCable ? ...

  • EnGenius ENH900EXT - page 8

    8 WDS Detail WDS AP WDS Bridge WDS Station Mesh Detail Mesh AP Mesh Only Management Auto Channel Selection MultipleSSID:16SSIDs,8SSIDsperRadio BSSID SNMP V1/V2c/V3 MIB I/II, Private MIB VLAN Tag/VLAN Pass-through Clients Statistics SaveCongurationasUserDefault Fast Roaming E-Mail Alert RADIUSAccounting Guest N ...

  • EnGenius ENH900EXT - page 9

    9 Security WEPEncryption-64/128/152bit WPA/WPA2 Personal (WPA-PSK using TKIP or AES) WPA/WPA2 Enterprise (WPA-PSK using TKIP or AES) Hides SSID in beacons MACaddressltering,upto50MACs Wireless STA (Client) connection list Https Support SSH Support QoS (Quality of Service) ComplaintwithIEEE802.11estandard ...

  • EnGenius ENH900EXT - page 10

    10 Physical Interface Dimensions and Weights Length: 11.22” Width:8.58” Depth: 2.1” Weight: 4.17 lbs 1 2.4 GHz Antennas: Detachable 5 dBi 2.4 GHz Omni-directional 2 5 GHz Antennas Detachable 7 dBi 5 GHz Omni-directional 3 LAN Port 1 (802.3at PoE Input) : Ethernet port for RJ-45 cable. 4 LAN Port 2 (802.3af PSE Output): Ethernet port for RJ ...

  • EnGenius ENH900EXT - page 11

    11 Chapter 2 Before You Begin ...

  • EnGenius ENH900EXT - page 12

    12 Windows XP/Windows 7 In order to use the ENH900EXT, you must rst congure the  TCP/IPv4 connection of your Windows OS computer system. 1. Click the Start button and open the Control Panel . 2a. In Windows XP, click Network Connections. 2b. In Windows 7 , click View Network Status and Tasks in the Network and ...

  • EnGenius ENH900EXT - page 13

    13 4. Select Internet Protocol Version 4 (TCP/IPv4) and then select Properties . 5. Select Use the following IP address and enter an IP address that is different from the ENH90 0E X Tand Subnet mask, then click OK . Note: Ensure that the IP address and Subnet mask are on the same subnet as the device. Forexample: ENH900EXTIPaddress:1 ...

  • EnGenius ENH900EXT - page 14

    14 Apple Mac OS X 1. Go to System Preferences (Which can be opened in the Applications folder or selecting it in the Apple Menu). 2. Select Network in the Internet & Network section. 3. Highlight Ethernet. 4. In Congure IPv4 , select Manually. 5. Enter an IP address that is different from the E N H9 00E XT and Subnet mask then press OK. Note ...

  • EnGenius ENH900EXT - page 15

    15 1. Connect one end of the Ethernet cable into the main LAN port (PoE) of the Access Point and the other end to theAPEthernetportonthePoEinjector. 2. Connect the Power Adapter to the DC-IN port of the PoE injector and plug the other end in to an electrical outlet. 3. Connect the second Etherne ...

  • EnGenius ENH900EXT - page 16

    16 Using the provided hardware, the ENH900EXT can be attached to a wall or a pole. To attach the ENH900EXT to a wall using wall mounting kit. 1. Mark the four locations of the mounting holes on the atmountingsurface. 2.  Drilla37mmdeep8mmholeinthemarkingsand hammer the bolts in ...

  • EnGenius ENH900EXT - page 17

    17 To attach the ENH900EXT to a pole using the provided pole mounting kit: 1.  Place the lock and at washers on the four hex cap screws  and drive the screws to attach the bracket to the back of the Access Point. 2. Drive the four round head screws to attach the Pole Mount Bracket to the bracket. 3. Thread ...

  • EnGenius ENH900EXT - page 18

    18 Chapter 3 Conguring Your Access Point ...

  • EnGenius ENH900EXT - page 19

    19 This section will show you how to congure the device  usingtheweb-basedcongurationinterface. Default Settings Please use your Ethernet port or wireless network adapter to connect the Access Point. IP Address 192.168.1.1 Username / Password admin / admin Web Conguration 1. Open a web browser (Int ...

  • EnGenius ENH900EXT - page 20

    20 Chapter 4 Building a Wireless Network ...

  • EnGenius ENH900EXT - page 21

    21 The ENH900EXT has the ability to operate in various modes. This chapter describes the operating modes of the ENH900EXT. Access Point Mode InAccess PointMode, ENH900EXTbehaves likesa centralconnection forstations orclients thatsupport IEEE802.11a/b/g/n  networks.The stations andcli ...

  • EnGenius ENH900EXT - page 22

    22 The ENH900EXT can be used as a centralized Outdoor Access Point with which other EnGenius Wireless N 2.4 or 5 GHz Outdoor Client Bridges can associate; leveraging the long-range capability of their internal high-gain directional antennas, resulting in a very cost-effective solution to expand a company network over a multiple building campus. ENH ...

  • EnGenius ENH900EXT - page 23

    23 WDS AP Mode The E NH 9 00 E XT also supports WDS AP mode. This operating mode allows wireless connections to the E NH 90 0E XT using WDS technology. In this mode, congure the MAC addresses in both Access Points to enlarge the wireless area by enabling  WDS Link settings. WDS supports ...

  • EnGenius ENH900EXT - page 24

    24 WDS Bridge Mode In WDS Bridge Mode, the ENH900EXT can wirelessly connect different LANs by conguring the MAC address and  security settings ofeach ENH900EXT device. Use this modewhen two wired LANs located asmall distance apart want to ...

  • EnGenius ENH900EXT - page 25

    25 WDS Station Mode Station mode expands the WDS by receiving a wireless signal/service and sharing it through the Ethernet port. ENH900EXT WDS AP on both 5 GHz & 2.4 GHz ENH900EXT WDS Station ENH900EXT WDS Station ENH900EXT WDS Station ...

  • EnGenius ENH900EXT - page 26

    26 AP Mesh Mode Under the AP Mesh mode, the ENH900EXT can be used as the central connection hub for station or clients that support IEEE 802.11 b/g/n network. Under this mode, the ENH900EXT can be congured with the same Mesh SSID and ...

  • EnGenius ENH900EXT - page 27

    27 Under the Mesh-only mode, the ENH900EXT can be congured with the same Mesh SSID and security password in order to associate with other Mesh enabled ENH900EXTs, instead of connecting with clients. Mesh Only Mode ENH900EXT Acc ess Point ENH900EXT Acc ess Point ENH900EXT Acc ess Point ENH900EXT Acc ...

  • EnGenius ENH900EXT - page 28

    28 Chapter 5 Status ...

  • EnGenius ENH900EXT - page 29

    29 Save Changes This page lets you save and apply the settings shown under Unsaved changes list , or cancel the unsaved changes and revert to the previous settings that were in effect. Device Status Clicking the Device Status link under the Overview menu shows the status information about the current operating mode. • The Device Information se ...

  • EnGenius ENH900EXT - page 30

    30 Network settings such as the LAN IP Address, Subnet mask, and DNS Address. •  The Wireless LAN Information 2.4 GHz/5 GHz section shows wireless information such as Operating Mode, Frequency, and Channel. Since the ENH900EXT supports multiple-SSIDs, information about each SSID, the ESSID, and security settings, are displayed Note: Prol ...

  • EnGenius ENH900EXT - page 31

    31 • The Wireless Mesh Information - 2.4 GHz section shows wireless information such as Operation Mode, Wireless Mode, Channel Bandwidth, Frequency/ Channel, Mesh SSID and Mesh Security. ...

  • EnGenius ENH900EXT - page 32

    32 2.4 GHz/5 GHz Connection List Click the connection link under the Overview menu displays the connection list of clients associated to the ENH900EXT’s 2.4 GHz/5 GHz, along with the MAC addresses and signal strength for each client. Clicking Refresh updates the client list. Note: Only applicable in Access Point and WDS AP modes. 2.4 GHz/5 GHz WD ...

  • EnGenius ENH900EXT - page 33

    33 The Mesh Link List Monitor the 2.4GHz Mesh Link List under the status menu. The page will display the current status of the Mesh Links under the Mesh AP mode and Mesh nodes under the Mesh Only mode. Note: Only Applicable in the Mesh AP and Mesh Only mode. ...

  • EnGenius ENH900EXT - page 34

    34 Chapter 6 Network ...

  • EnGenius ENH900EXT - page 35

    35 IPv4/IPv6 Settings This page allows you to modify the device’s IP settings. IP Network Settings: Select whether the device IP address willuse astatic IPaddressspecied inthe IPaddresseld  or be obtained automatically when the device connects to a DHCP server. IP Address: The IP address of this device. S ...

  • EnGenius ENH900EXT - page 36

    36 Spanning Tree Protocol (STP) Settings This page allows you to modify the Spanning Tree settings. Enabling the Spanning Tree protocol will prevent network loops in your LAN network. Spanning Tree Status : Enables or disables the Spanning Tree function. Hello Time : Species Bridge Hello Time in seconds. This value determ ...

  • EnGenius ENH900EXT - page 37

    37 Chapter 7 2.4 GHz & 5 GHz Wireless ...

  • EnGenius ENH900EXT - page 38

    38 Wireless Settings Device Name: Enter a name for the device. The name you type appears in SNMP management. This name is not the SSID and is not broadcast to other devices. Band Steering:  Enable Band Steering to send 802.11n clients to the 5 GHz band, where 802.11b/g clients cannot go, and ...

  • EnGenius ENH900EXT - page 39

    39 This page displays the current status of the Wireless settings of the ENH900EXT. 2.4 GHz/5 GHz Wireless Network Operation Mode: Select Operation Mode . The ENH900EXT supports three different operation modes: Access Point, or WDS (WDS AP, WDS Bridge, and WDS Station). Wireless Mode: Supports 802.11b/g/n mixed mode in 2.4 GHza ...

  • EnGenius ENH900EXT - page 40

    40 use by scanning nearby areas for Access Points. Distance:  Species the distance between Access Points and clients. Note that longer distances may drop higher- speed connections. Save: Click Save  to conrm the changes or Cancel to cancel and return to previous settings. ...

  • EnGenius ENH900EXT - page 41

    41 2.4 GHz/5 GHz SSID Prole Current Prole:  You can congure up to sixteen (16) different SSIDs (eight (8) per band). If multiple client  devices will be accessing the network, you can arrange the devices into SSID groups. Click Edit to conguretheprole and check whether yo ...

  • EnGenius ENH900EXT - page 42

    42 Wireless Security The Wireless Security section lets you congure the ENH900EXT’s security modes: WEP, WPA-PSK, WPA2-PSK, WPA-PSK Mixed, WPA, WPA2, and WPA Mixed. It is strongly recommend that you use WPA2-PSK. Auth Type: Select Open System or Shared Key . Input Type : ASCII: Regular Text (recommended) Hexadecimal Num ...

  • EnGenius ENH900EXT - page 43

    43 Wireless MAC Filtering Wireless MAC Filtering is used to allow or deny network access to wireless clients (computers, tablet PCs, NAS, smartphones, etc.) according to their MAC addresses. You can manually add a MAC address to restrict permission to access the ENH900EXT. The default setting is: Disable Wireless MAC Filter . Note: Only applicable ...

  • EnGenius ENH900EXT - page 44

    44 Wireless Advanced Wireless Trafc Shaping Trafc shaping regulates the ow of packets leaving an interfacetodeliverimprovedQualityofService. Enable Trafc Shaping : Check this option to enable WirelessTrafcShaping. Download Limit: Species the wireless transmission speed ...

  • EnGenius ENH900EXT - page 45

    45 WPA Mixed-Enterprise: Access Point / WDS AP mode Encryption: Select the WPA encryption type you would like. Please ensure that your wireless clients use the same settings. Radius Server: Enter the IP address of the Radius server. Radius Port: Enter the port number used for connections to the Radius server. Radius Secret: Enter the secret require ...

  • EnGenius ENH900EXT - page 46

    46 WDS Link Settings Using the WDS (Wireless Distribution System) feature will allow a network administrator or installer to connect to Access Points wirelessly. Doing so will extend the wired infrastructure to locations where cabling is not possible or inefcienttoimplement. Note: Compatibility between different bra ...

  • EnGenius ENH900EXT - page 47

    47 2.4GHz Mesh Link Settings Userscanchoosethe2.4GHzbandforMeshoperation. Mesh SSID: To create a mesh network, please enter the Mesh SSID of the Access Point that you wish to include in the Mesh. Security: Select None or WPA2-PSK AES from drop-down list. Mesh Settings AES Passphrase: Enter the key values you wish to uses. Ot ...

  • EnGenius ENH900EXT - page 48

    48 Guest Network Settings Adding a guest network allows visitors to use the Internet without giving out your ofce or company wireless security key. You can add a guest network to each wireless network in the 2.4 GHzb/g/n and 5 GHza/n frequencies. SSID: SpeciestheSSIDforthecurrentprole. Suppresse ...

  • EnGenius ENH900EXT - page 49

    49 Chapter8 Management ...

  • EnGenius ENH900EXT - page 50

    50 Management VLAN Settings This page allows you to assign a VLAN tag to packets sent over the network. A VLAN is a group of computers on a network whose software has beencongured so thatthey behave as if they were on a separate Local Area Network (LAN). Computers on VLAN do not have to be physically located next to on ...

  • EnGenius ENH900EXT - page 51

    51 Wi-Fi Multi Media (WMM) This feature provide QoS (Quality of Service) for prioritizing multimedia trafc on the network. WMM prioritization achieves the goal of minimizing delay in a wireless network for time-sensitive applications such as video streaming. WMM Parameters: According to version 1.1 ...

  • EnGenius ENH900EXT - page 52

    52 SNMP Settings This page allows you to assign the Contact Details, Location, Community Name, and Trap Settings for a Simple Network Management Protocol (SNMP). SNMP is a networking management protocol used to monitor network attached devices. SNMP allows messages (called protocol data units) to be sent to various parts of the ...

  • EnGenius ENH900EXT - page 53

    53 CLI Settings CLI : The Command Line Interface (CLI) allows you to type commands instead of choosing them from a menu or selecting an icon. SSH : Enable Secure Shell (SSH) to make secure, encrypted connections in the network. Secure Shell is a network protocol that allows data to be exchanged using a secure channel between two network devices. HT ...

  • EnGenius ENH900EXT - page 54

    54 Username: Enter the username for the email account that will be used to send emails. Password: Enter the password for the email account that will be used to send emails. SMTP Server: Enter the IP address or hostname of the outgoing SMTP server. Port: Enter the SMTP port number to use for outbound emails. ...

  • EnGenius ENH900EXT - page 55

    55 Time Setting This page allows you to set the internal clock of the ENH900EXT. Manually Set Date and Time: Manually specify the date and time. Automatically Get Date and Time: Select Automatically Get Date and Time and check whether you wish to enter the IP address of an NTP server or use the default NTP server to have the internal clock set auto ...

  • EnGenius ENH900EXT - page 56

    56 Auto Reboot Settings You can specify how often you wish to reboot the ENH900EXT. Auto Reboot Setting : Enables or disables the Auto Reboot function. Frequency of Auto Reboot : Specifies how often you wish to reboot the ENH900EXT by Min, Hour, Day or Week. Timer : Select the day and enter the time you would like to reboot automatically. Save : Cl ...

  • EnGenius ENH900EXT - page 57

    57 Wi-Fi Scheduler The Wi-Fi Scheduler can be created for use in enforcing rules. For example, if you wish to restrict web access to Mon-Fri from 3pm to 8pm, you could create a schedule  selecting Mon, Tue, Wed, Thu and Fri while entering a Start time of 3pm and EndTime of 8pm to limit acc ...

  • EnGenius ENH900EXT - page 58

    58 Ping Test Parameters This page allows you to analyze the connection quality of the ENH900EXT and trace the routing table to a target in the network. Target IP: Enter the IP address you would like to search. Ping Packet Size: Enter the packet size of each ping. Number of Pings: Enter the number of times you wish to ping. Start Ping: Click Start P ...

  • EnGenius ENH900EXT - page 59

    59 Speed Test Parameters / LED Control This page allows you to control LED on/off for Power, LAN interface, or 2.4 GHz/5 GHz WLAN interface. LED Control Power: Enables or disables the Power LED indicator. LAN: Enables or disables the LAN LED indicator. WLAN-2.4 GHz: Enables or disables the WLAN-2.4 GHz LED indicator. WLAN-5 GHz: Enables or disables ...

  • EnGenius ENH900EXT - page 60

    60 This page allows you to change the ENH900EXT username and password. By default, the username is: admin and the password is: admin . The password can contain from 0 to 12 alphanumeric characters and is case sensitive. Account Settings Administrator Username : Enter a new username for logging in to the New Name entry box. Current Password: Enter t ...

  • EnGenius ENH900EXT - page 61

    61 Backup/Restore This page allows you to save the current device configurations. When you save your configurations, you also can reload the saved configurations into the device through the Restore Saved Settings from a file section. If extreme problems occur, or if you have set the ENH900EXT incorrectly, you can use the Reset button in the Revert ...

  • EnGenius ENH900EXT - page 62

    62 System Log The ENH900EXT automatically logs (records) events of possible interest in its internal memory. To view the logged information, click the Log link under the System Manager menu. If there is not enough internal memory to log all events, older events are deleted from the log. When powered down or rebooted, the log will be cleared. Remote ...

  • EnGenius ENH900EXT - page 63

    63 Logout Click Logout in Management menu to logout. Reset In some circumstances, it may be required to force the device to reboot. Click on Reset to reboot the ENH900EXT. ...

  • EnGenius ENH900EXT - page 64

    64 Appendix ...

  • EnGenius ENH900EXT - page 65

    65 Federal Communication Commission Interference Statement This equipment has been tested and found t o comply with the limits for a Class B digital device , pursuant to P ar t 15 of the FC C Rules. These limits are designed to pr ovide reasonable prot ec tion against harmful interference in a r esidential installation. This equipment generates, us ...

  • EnGenius ENH900EXT - page 66

    66 Europe – EU Declaration of Conformity This device complies with the essen tial requirements of the R&T TE Directive 1999/5/EC. The f ollowing test methods hav e been applied in order to pro ve presumption of conf ormity with the essential requirements of the R&T TE Directive 1999/5/EC:  • EN60950-1 Safety of Information T echno ...

  • EnGenius ENH900EXT - page 67

    67 This device is a 5GHz wideband transmission system (tr ansceiver), intended f or use in all EU member states and EFT A countries, ex cept in F rance and Italy where restrictive use applies. In I taly the end-user should apply for a lic ense at the national spectrum authorities in order to obtain authorization to use the device f or setting up ou ...

  • EnGenius ENH900EXT - page 68

    68 F rançais [F rench] P ar la présente [nom du fabricant] déclare que l’appar eil [type d ’appar eil] est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. I taliano [Italian] Con la presente [nome del costrutt ore] dichiara che questo [tipo di apparecchio] è conf orme ai requisiti essenz ...

Manufacturer EnGenius Category Access Point

Documents that we receive from a manufacturer of a EnGenius ENH900EXT can be divided into several groups. They are, among others:
- EnGenius technical drawings
- ENH900EXT manuals
- EnGenius product data sheets
- information booklets
- or energy labels EnGenius ENH900EXT
All of them are important, but the most important information from the point of view of use of the device are in the user manual EnGenius ENH900EXT.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals EnGenius ENH900EXT, service manual, brief instructions and user manuals EnGenius ENH900EXT. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product EnGenius ENH900EXT.

Similar manuals

A complete manual for the device EnGenius ENH900EXT, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use EnGenius ENH900EXT by users. Manuals are usually written by a technical writer, but in a language understandable to all users of EnGenius ENH900EXT.

A complete EnGenius manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual EnGenius ENH900EXT - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the EnGenius ENH900EXT, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the EnGenius ENH900EXT, that we can find in the current document
3. Tips how to use the basic functions of the device EnGenius ENH900EXT - which should help us in our first steps of using EnGenius ENH900EXT
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with EnGenius ENH900EXT
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of EnGenius ENH900EXT in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning EnGenius ENH900EXT?

Use the form below

If you did not solve your problem by using a manual EnGenius ENH900EXT, ask a question using the form below. If a user had a similar problem with EnGenius ENH900EXT it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)