English dropdown-ico

Manual Toshiba SL-9000-FFH-CA

92 pages 0.51 mb
Download

Go to site of 92

Summary
  • Toshiba SL-9000-FFH-CA - page 1

    TEC Electronic Computing Scale SL-9000/9000N-FFH-US/CA/QR Owner ’ s Manual ...

  • Toshiba SL-9000-FFH-CA - page 2

    ...

  • Toshiba SL-9000-FFH-CA - page 3

    TABLE OF CONTENTS Page 1. INTRODUCTION ..................................................................................................... 1- 1 1.1 APPLICABLE MODEL ................................................................................... 1- 2 1.2 ACCESSORIES .............................................................................. ...

  • Toshiba SL-9000-FFH-CA - page 4

    Copyright  2001 by TOSHIBA TEC CORPORATION All Rights Reserved 570 Ohito, Ohito-cho, Tagata-gun, Sizuoka-ken, JAPAN Page 11. PROGRAMMED DATA VERIFICATION REPORTS ................................................. 11- 1 12. PASSWORD SECURITY ......................................................................................... 12- 1 12.1 SETTIN ...

  • Toshiba SL-9000-FFH-CA - page 5

    ...

  • Toshiba SL-9000-FFH-CA - page 6

    1. INTRODUCTION 1. INTRODUCTION 1- 1 1. INTRODUCTION Thank you for purchasing the TEC SL-9000 electronic computing scale. The TEC SL-9000 is designed to be hung from the ceiling. As you will discover, it has many features and functions designed for user friendliness as well as complete customer satisfaction. The 256x64 dot fluorescent display provi ...

  • Toshiba SL-9000-FFH-CA - page 7

    1. INTRODUCTION 1.1 APPLICABLE MODEL 1- 2 Max. Capacity 30M: 30 lbs (decimal pound /multi-inter val) 15M: 15 Kg (multi-interval) 1.1 APPLICABLE MODEL • SL-9000-15M-FFH-CA • SL-9000-30M-N-FFH-US • SL-9000-15M-FFH-QR • SL-9000-15M-N-FFH-CA • SL-9000-15M-N-FFH-QR The description of the model number is as follows. SL-9000-30M-N-FFH-US 1.2 ACC ...

  • Toshiba SL-9000-FFH-CA - page 8

    2. SPECIFICATION 2.1 SCALE 2- 1 2. SPECIFICATION 2.1 SCALE Item US CA QR Maximum Capacity 30 lb 15 Kg (30 lb) Minimum Scale Division 0.005 lb (0 to 15 lb.) 0.01 lb (15 to 30 lb.) 0.002 Kg (0 to 6 Kg) 0.005 Kg (6 to 15 Kg) 0.005 lb (0 to 15 lb) 0.01 lb (15 to 30 lb) Display Range 0 to 30.05 lb 0 to 15.025 Kg (0 to 30.05 lb) Maximum Tare 2.000 lb 1.0 ...

  • Toshiba SL-9000-FFH-CA - page 9

    2. SPECIFICATION 2.2 OPTION 2- 2 2.2 OPTION Option Name Model No. or Part No. Description Source LON Connector TM8P-88P Part No. EAJ-0028001 A modular connector used to connect scales to each other in a LON configuration. See Note 2 LON Terminal Resistor 285D-8P Part No. EAJ-0029001 A modular resistor attached to the scales connected at both ends o ...

  • Toshiba SL-9000-FFH-CA - page 10

    3. APPEARANCE 3. APPEARANCE 3- 1 3. APPEARANCE NOTE : To set the speed/operation key sheet, open the keyboard frame and insert t he two tabs of the key sheet into the two slots of the keyboard frame bottom. Main Power Switch Printer Cover Print Head LON Interface Front Display Keyboard Frame Operation/Speed/ Programming Keyboard CMT/PL-3 Interface ...

  • Toshiba SL-9000-FFH-CA - page 11

    4. DISPLAY 4.1 US TYPE 4- 1 4. DISPLAY 4.1 US TYPE n Front Display Panel n Rear Display Panel SL-9000N CAPACITY SCROLLING MESSAGE INDICATES SCALE AT ZERO x o WEIGHT e=d 0 ∼ 15 lb 0.005 lb 15 ∼ 30 lb 0.01 lb SL-9000N CAPACITY SCROLLING MESSAGE INDICATES SCALE AT ZERO WEIGHT e=d 0 ∼ 15 lb 0.005 lb 15 ∼ 30 lb 0.01 lb ...

  • Toshiba SL-9000-FFH-CA - page 12

    4. DISPLAY 4.2 CA/QP TYPE 4- 2 4.2 CA/QR TYPE n Front Display Panel n Rear Display Panel SL-9000N CAPACITY x o WEIGHT e=d WEIGHT e=d 0 ∼ 6 kg 0.002 kg 0 ∼ 15 lbs 0.005 lbs 6 ∼ 15 kg 0.005 kg 15 ∼ 30 lbs 0.01 lbs SL-9000N CAPACITY WEIGHT e=d WEIGHT e=d 0 ∼ 6 kg 0.002 kg 0 ∼ 15 lbs 0.005 lbs 6 ∼ 15 kg 0.005 kg 15 ∼ 30 lbs 0.01 lbs CAP ...

  • Toshiba SL-9000-FFH-CA - page 13

    5. KEY LAYOUT 5.1 PROGRAMMING KEYBOARD 5- 1 5. KEY LAYOUT 5.1 PROGRAMMING KEYBOARD NOTE: Blank keys have no function. ■ Programming Keyboard Function Name of Key Function 1. Clears numeric data just entered. 2. Releases the scale from the error mode. Selects the upper case or lower case. Calls the PLU # which follows the PLU # currently called. S ...

  • Toshiba SL-9000-FFH-CA - page 14

    5. KEY LAYOUT 5.1 PROGRAMMING KEYBOARD 5- 2 Name of Key Function 1. Displays the preceding PLU data. 2. Used t o set an auto code. 3. Calls the preceding label format # when setting the print position. Moves the cursor to left. Moves the cursor to right. 1. Deletes a character selected by the cursor when setting the commodity name or message. 2. Se ...

  • Toshiba SL-9000-FFH-CA - page 15

    5. KEY LAYOUT 5.2 OPERATION KEYBOARD AND SPEED KEYBORAD 5- 3 5.2 OPERATION KEYBOARD AND SPEED KEYBOARD ■ Operation Keyboard Function Name of Key Function to Enters PLU #, unit price and tare. 1. Clears numeric entries. 2. Releases the scale from error mode. 3. Releases the scale from SAVE mode. Subtracts tare. Calls a PLU or clears displayed PLU. ...

  • Toshiba SL-9000-FFH-CA - page 16

    5. KEY LAYOUT 5.2 OPERATION KEYBOARD AND SPEED KEYBORAD 5- 4 ■ Operation Keyboard Function Name of Key Function Corrects data just after the registration. 1. Selects the speed key page. 2. Selects the function for change Print/OFF. Returns to the main menu. Accesses print item, auto message timer, print format and issue mode selection mode. Turns ...

  • Toshiba SL-9000-FFH-CA - page 17

    6. PROCEDURE BEFORE OPERATION 6. PROCEDURE BEFORE OPERATION 6- 1 6. PROCEDURE BEFORE OPERATION 1. Ask an authorized installing dealer for the scale installation. Please contact your nearest TOSHIBA TEC representative. 2. Hang the platter arm from the scale. (See page 7-1.) 3. Load the label or receipt. 4. Set the following programming menus: Menu P ...

  • Toshiba SL-9000-FFH-CA - page 18

    7. INSTALLATION PROCEDURE 7. INSTALLATION PROCEDURE 7- 1 7. INSTALLATION PROCEDURE ■ Scale installation on the wall or ceiling The installation should be an authorized installing dealer. Please contect your nearest TOSHIBA TEC representative. ■ Platter 1. Attach the two platter mount plates to the platter arm with the four D-4x8 screws. 2. Fit ...

  • Toshiba SL-9000-FFH-CA - page 19

    8. REMOVAL AND REPLACEMENT OF RECEIPT/LABEL 8. REMOVAL AND REPLACEMENT OF RECEIPT/LABEL 8- 1 8. REMOVAL AND REPLACEMENT OF RECEIPT/LABEL 1. Open the printer cover and turn the head-up lever to the anticlockwise. 2. Pull o ut the roll stopper and backing paper stopper, then remove the receipt/label core with the backing paper. You can loosen the bac ...

  • Toshiba SL-9000-FFH-CA - page 20

    8. REMOVAL AND REPLACEMENT OF RECEIPT/LABEL 8. REMOVAL AND REPLACEMENT OF RECEIPT/LABEL 8- 2 4. Insert the tip of the receipt/label into the print head. 5. Align the two media guides with the right edge of the receipt/label. 6. Thread the receipt/label as shown below. NOTE: Labels and re ceipts should be left-aligned as viewed from the front of the ...

  • Toshiba SL-9000-FFH-CA - page 21

    9 . OUTLINE OF OPERATION 9. OUTLINE OF OPERATION 9- 1 9. OUTLINE OF OPERATION Main Power Switch ON Display OFF Press the key POWER Scanning Display Press the key POWER ① REG Menu REWRAP Menu MARK DOWN Menu PROG Menu REPORT Menu RESET Menu SECURITY Menu POWER Return to each mode Display OFF Press ① ② Press Password ② Main Menu Necessary Pass ...

  • Toshiba SL-9000-FFH-CA - page 22

    10. PROGRAMMING PROCEDURES ■ How to access to Programming Menu 10- 1 10. PROGRAMMING PROCEDURES ■ How to access to Programming Menu Password Enter the Password ∼ Programming starts Programming completes unnecessary Enter a menu number Select an item No. (See next page.) Select the programming menu page. neccesary ESC. 0 0 9 PROG. ◇ NOTES: 1 ...

  • Toshiba SL-9000-FFH-CA - page 23

    10. PROGRAMMING PROCEDURES ■ Title and Contents of Programming Menu 10- 2 ■ Title and Contents of Programming Menu Table 1. NO. TITLE MENU PAGE ITEM NO. CONTENTS Page 1 PLU DATA EDIT 1 0 CHANGE UNIT PRICE 10-4 2 PLU DATA 1 1 PROGRAM/CHANGE/DELETE PLU 10-5 3 INGREDIENT MESSAGE 1 2 PROGRAM/CHANGE INGREDIENT 10-7 4 NUTRITION SETTING 1 3 PROGRAM/CH ...

  • Toshiba SL-9000-FFH-CA - page 24

    10. PROGRAMMING PROCEDURES ■ How to enter characters 10- 3 ■ How to enter characters Use the following procedure to enter a commodity name, address and ingredient message. Example) 1st line: TEC STORE 2nd line: (TEL) 0123-45-6789 1 st line content 2 nd line content NOTES: 1. and keys are the cursor keys. 2. To insert a space, move the cursor to ...

  • Toshiba SL-9000-FFH-CA - page 25

    10. PROGRA MMING PROCEDURES 10.1 PLU DATA EDIT 10- 4 10.1 PLU DATA EDIT Menu Page: 1 Item No.: 0 In this procedure, use operation keys (except when calling a PLU by using a speed key). The unit price stored in a PLU can be changed with this menu. NOTES: 1. An attempt to call a PLU # that has not been stored in the PLU file results in an error. 2. U ...

  • Toshiba SL-9000-FFH-CA - page 26

    10. PROGRAMMING PROCEDURES 10.2 PLU DATA SETTING 10- 5 10.2 PLU DATA SETTING Menu Page: 1 Item No.: 1 Setting or changing the contents of PLU (PLU#, UPC#, Commodity Name, etc). b Enter PLU# (max. 6 dig.) Enter UPC# (Max. 6 dig.) Enter commodity name. (max. 32 chars. × 4 lines) In what mode is PLU used? Enter quantity for that price. (Max. 2 dig.) ...

  • Toshiba SL-9000-FFH-CA - page 27

    10. PROGRAMMING PROCEDURES 10.2 PLU DATA SETTING 10- 6 NOTES: 1. A UPC code is made up of a combination of an entered code and an AUTO CODE. Be sure to attach some characters to the end of the AUTO CODE, or all entered codes will be ignored and an AUTO CODE will become an UPC code (see ex. 1). ex. 1) enter code: 456 ex. 2) enter code: 4567 ex. 3) e ...

  • Toshiba SL-9000-FFH-CA - page 28

    10. PROGRAMMING PROCEDURES 10.3 INGREDIENT MESSAGE 10- 7 10.3 INGREDIENT MESSAGE Menu Page: 1 Item No.: 2 Ingredient messages can be printed on a label with a maximum of 54 characters per line using small letters or 32 characters per line using boldfaced small letters. Will print up to 38 lines. NOTES: 1. When no data is programmed for the PLU, ing ...

  • Toshiba SL-9000-FFH-CA - page 29

    10. PROGRAMMING PROCEDURES 10.4 NUTRITION SETTING 10- 8 10.4 NUTRITION SETTING Menu Page: 1 Item No.: 3 Using the following procedure, nutrition information and caloric intake can be set. Serving Size and Servings Per Container consist of a maximum of a 18 characters. However, total number of characters including title characters must not exceed 30 ...

  • Toshiba SL-9000-FFH-CA - page 30

    10. PROGRAMMING PROCEDURES 10.4 NUTRITION SETTING 10- 9 Additional Information Area 2 to 6. (0 to 99999 or 0.0 to 999.9) Enter the vitamin A. (0 to 999) Enter the Vitamin C. (0 to 999) Enter the Calcium. (0 to 999) Enter the Iron. (0 to 999) Additional Information Area 7 to 12 (0 to 999) e f ENTER ENTER ENTER ENTER ENTER ENTER PROG. ESC. <MENU&g ...

  • Toshiba SL-9000-FFH-CA - page 31

    10. PROGRAMMING PROCEDURES 10.4 NUTRITION SETTING 10- 10 ● Set the Daily Value Table NOTES: 1. DAILY VALUE (Max. 8 digits) 1) The contents of Daily value 2) The necessary daily intake of calories can be changed by changing the above table data, and percentage will be changed accordingly. 2. Percentage of daily intake 1) Percentage d ata are print ...

  • Toshiba SL-9000-FFH-CA - page 32

    10. PROGRAMMING PROCEDURES 10.4 NUTRITION SETTING 10- 11 ● Deleting Nutrition Data ● Memory file sort The memory file is sorted when a memory full error occurs. d Enter the PLU# (max. 6 dig.) e DELETE PLU ENTER d Not Sorting Sorting e Any key except Y Y ◇ Area for titles Area for entry data: Set in this menu (Nutrition Setting procedure) Area ...

  • Toshiba SL-9000-FFH-CA - page 33

    10. PROGRAMMING PROCEDURES 10.5 PLU VERIFYING LABEL 10- 12 10.5 PLU VERIFYING LABEL Menu Page: 1 Item No.: 4 Verifies PLU data stored in the scale. NOTES: 1. Labels are printed in both batch mode and on-demand mode. 2. When no PLU is stored in the selected range, an error occurs when the key is pressed. 3. Pressing the key releases the scale from t ...

  • Toshiba SL-9000-FFH-CA - page 34

    10. PROGRAMMING PROCEDURES 10.6 ADDRESS AND COMMERCIAL MESSAGE SETTING 10- 13 10.6 ADDRESS AND COMMERCIAL MESSAGE SETTING Menu Page: 1 Item No.: 5 A store address printed on label and a commercial message shown on the display can be set within the following character limits using the procedure below. Address: 32 characters × 2 lines Message: 90 ch ...

  • Toshiba SL-9000-FFH-CA - page 35

    10. PROGRAMMING PROCEDURES 10.7 COMBINATION MESSAGE 10- 14 10.7 COMBINATI ON MESSAGE Menu Page: 1 Item No.: 6 You can combine some messages set in Section 10.6 together and create a maximum of 24 different combination messages. NOTE: When the fixed message is selected, set “ 00 ” as the 1st and 2nd messages. Otherwise, set “ 00 ” as the 1st ...

  • Toshiba SL-9000-FFH-CA - page 36

    10. PROGRAMMING PROCEDURES 10.7 COMBINATION MESSAGE 10- 15 NOTE: T he scrolling up/down methods allow displaying 16 characters per line, up to a total of 90 characters per display. 3. Displa y method varies depending on message construction. 1) message combination a. single message ･･･････ either scrolling or fixed is available. b. mu ...

  • Toshiba SL-9000-FFH-CA - page 37

    10. PROGRAMMING PROCEDURES 10.8 SPECIAL INFORMATION 10- 16 10.8 SPECIAL INFORMATION Menu Page: 1 Item No.: 7 When the Net Weight Statement label is selected, 3 lines (32 characters/line) of special information can be printed in the label position where the net weight data is to be printed. The special information can be printed in the weigh and By ...

  • Toshiba SL-9000-FFH-CA - page 38

    10. PROGRAMMING PROCEDURES 10.10 SPEED KEY SETTING 10- 17 10.10 SPEED KEY SETTING Menu Page: 1 Item No.: 9 The SL-9000 has a maximum of 108 × 2 speed keys which are very convenient to call PLUs quickly. (Refer to page 5-3 regarding the Key Layout.) ■ Setting Department/Vendor Number ● Department Number When initial set #10-6 is set to “ 1 ? ...

  • Toshiba SL-9000-FFH-CA - page 39

    10. PROGRAMMING PROCEDURES 10.11 PRINT FORMAT 10- 18 10.11 PRINT FORMAT Menu Page: 2 Item No.: 0 The SL-9000 can memorize 5 different print formats. After print formats are set, you can call them by pressing the print format number. 0 j <MENU> Page 2 PROG. ESC. Incorrect <MENU> Page 2 Main <MENU> Select the print format # which al ...

  • Toshiba SL-9000-FFH-CA - page 40

    10. PROGRAMMING PROCEDURES 10.11 PRINT FORMAT 10- 19 ■ Table 2: Label Format Number Table S elect the format # for the label to be used by referring to the table below. Print format 48-mm wide label 57-mm wide label Format # Basic form Ingredient Commodity Length Nutri. F.S. Length Nutri. F.S. 00 (50) NON POS 0 2 (48mm) lines only Yes 30.0 No No ...

  • Toshiba SL-9000-FFH-CA - page 41

    10. PROGRAMMING PROCEDURES 10.12 DATE/TIME SETTING 10- 20 NOTES: 1. The error mode can be released by pressing the key, and operated again through the above steps. 2. Use the metal cassette tape which is commercially available and has a capacity of 45 or 60 minutes recording. 3. For operations of the CMT loader, refer to the instruction manual prov ...

  • Toshiba SL-9000-FFH-CA - page 42

    10. PROGRAMMING PROCEDURES 10.13 CMT/PL-3 10- 21 ■ PL-3 Operation Error Code Error Message 0 FDC ERROR 1 FDK MISINSERTION ERROR 2 UNAVAILABLE FDK INSERTION ERROR 3 VOL. LABEL UNMATCH ERROR 4 FDK MEMORY FULL ERROR 5 WRITE PROTECT ERROR 1 6 NO SEARCH FILE ERROR 1 TIME OUT ERROR 2 LOAD ERROR 3 FDK ERROR 4 BUSY STATUS 5 POWER FAIL ERROR 3 6 OVERRUN E ...

  • Toshiba SL-9000-FFH-CA - page 43

    10. PROGRAMMING PROCEDURES 10.13 CMT/PL-3 10- 22 ■ Table 4: Transmission Item List ITEM # Title on the Display Contents of Transmission CMT PL-3 2 VERIFY PLU & ING. = CMT 2 COMPARE PLU & ING. IN OLD FORMAT ○ ○ 3 READ PLU & ING. FM CMT 3 READ PLU & ING. IN OLD FORMAT ○ ○ 4 WRITE PLU TO CMT 4 SAVE PLU IN NEW FORMAT ○ ○ 5 ...

  • Toshiba SL-9000-FFH-CA - page 44

    10. PROGRAMMING PROCEDURES 10.14 IN-LINE/LOCAL 10- 23 10.14 IN-LINE/LOCAL Menu Page: 2 Item No.: 3 When the SL-9000 is used as a satellite in an in-line system, the “ ID # ” and “ Transmission delay time ” can be set by the following procedure. NOTES: 1. The TMCC baud rate is fixed to 4800 BPS. 2. After setting the ID #, turn the power swit ...

  • Toshiba SL-9000-FFH-CA - page 45

    10. PROGRAMMING PROCEDUR ES 10.15 LON SYSTEM 10- 24 10.15 L ON SYSTEM Menu Page: 2 Item No.: 4 The SL-9000 scales which consists of a master, satellites, and a backup master are connected each other by the LON cable to transmit data such as PLU, ING., NUTRI, etc. ID# 1 is reserved for the master terminal. ID# 2 is reserved for the backup master ter ...

  • Toshiba SL-9000-FFH-CA - page 46

    10. PROGRAMMING PROCEDUR ES 10.15 LON SYSTEM 10- 25 ■ Data Transmission The following data is down-line-loaded. Page 1: (0). All (PLU+ING+NUTRI) Page 2: (0). SPEED KEY (1). PLU (1). LOGO (2). ING. (2). VENDOR (3). NUTRITION (3). FREE FORMAT (4). U. PRICE (4). ADDRESS (SL-9000N only) (5). DATE/TIME (5). INITIAL (#0-19, SL-9000N only) (6). MESSAGE ...

  • Toshiba SL-9000-FFH-CA - page 47

    10. PROGRAMMING PROCEDURES 10.16 BAR CODE FORMAT 10- 26 10.16 BAR CODE FORMAT Menu Page: 2 Item No.: 6 With the SL-9000 scale, four kinds of bar code formats are available. These formats can be changed freely. When changing the above example format into the weigh format described in NOTE 1, use the following procedure. NOTES: 1. In this printer, th ...

  • Toshiba SL-9000-FFH-CA - page 48

    10. PROGRAMMING PROCEDURES 10.16 BAR CODE FORMAT 10- 27 2. When the key is pressed, bar code format is checked. An error occurs in the following cases. ① Check digit (C/D) is at other than digit-13. ② Price check digit (PC/D) cannot be calculated. (Price is other than 4 or 5 digits.) ③ Price is not set serially beginning from P1 (P1 to P4, or ...

  • Toshiba SL-9000-FFH-CA - page 49

    10. PROGRAMMING PROCEDURES 10.17 TITLES 10- 28 10.17 TITLES Menu Page: 2 Item No.: 7 You can register and change displayed/printed titles of the additional information area for nutrition facts using the following procedure. Registered or changed titles are stored in the RAM. When ALL clear or RAM clear is executed, these titles will be cleared and ...

  • Toshiba SL-9000-FFH-CA - page 50

    10. PROGRAMMING PROCEDURES 10.18 TRANSFERRING LOGO DATA 10- 29 10.18 TRANSFERRING LOGO DATA Menu Page: 2 Item No.: 8 Logo data is created on a PC and stored into RAM through the CMT interface. Two different sizes of logos, 320x118 dots and 256x64 dots, are available on the SL-9000 series. 64 KB of RAM area is secured for logo data, in which the max ...

  • Toshiba SL-9000-FFH-CA - page 51

    10. PROGRAMMING PROCEDURES 10.19 IDIOM SETTING 10- 30 ■ Table 6: Error message during data transmission 10.19 IDIOM SETTING Menu Page: 2 Item No.: 9 Up to 50 terms frequently appearing in ingredient messages can be preset using the following procedure. The idiom number must be set from 1 to 50 in order. One idiom can contain a maximum of 20 chara ...

  • Toshiba SL-9000-FFH-CA - page 52

    10. PROGRAMMIN G PROCEDURES 10.20 VENDOR SETTING 10- 31 10.20 VENDOR SETTING Menu Page: 3 Item No.: 0 Up to 40 vendors can be registered using the following procedure. The vendor number must be set from 0 to 39 in order. One vendor name can contain a maximum of 12 characters. ● Deleting a vendor number 0 <MENU> Page 3 <MENU> Page 3 Ma ...

  • Toshiba SL-9000-FFH-CA - page 53

    10. PROGRAMMING PROCEDURES 10.21 FREE FORMAT SETTING 10- 32 10.21 FREE FORMAT SETTING Menu Page: 3 Item No.: 1 When using 57-mm wide labels, up to three print formats can be changed freely. Moreover, characters can be rotated and magnified, and print items are selectable. Enter the coordinate of each print item ’ s lower left corner using the low ...

  • Toshiba SL-9000-FFH-CA - page 54

    10. PROGRAMMING PROCEDURES 10.21 FREE FORMAT SETTING 10- 33 NOTES: 1. The following print items cannot be magnified. (1) LOGOs (2) Safe handling precautions (3) Ingredient messages (4) Barcode (5) FSP block (SL-9000N only) 2. Base label format numeric data is shown automatically. X coordinate: 0 -383 dots (1 dot = 0.132 mm) Y coordinate: 0-1300 dot ...

  • Toshiba SL-9000-FFH-CA - page 55

    10. PROGRAMMING PROCEDURES 10.21 FREE FORMAT SETTING 10- 34 Print area size Normal Rotation No. Print Item X Y X Y Note 26 (F) Unit price (title) 105 13 13 120 27 (F) Weight 106 20 20 112 28 (F) Weight (title) 105 13 13 120 29 (F) Price 138 32 32 146 30 (F) Price (title) 105 13 13 120 31 (L) LOGO 320 118 ---- ---- 32 FSP block (SL-9000N only) 384 1 ...

  • Toshiba SL-9000-FFH-CA - page 56

    10. PROGRAMMING PROCEDURES 10.21 FREE FORMAT SETTING 10- 35 8. Print coordinate *1 Addresses are printed together with the previous label ’ s data. To print addresses, use normal labels. POS (Format #10-16): 10.0 mm NET (Format #21-26): 10.0 mm Bar code (Format #31-35): 8.5 mm *2 Free format area Address Commodity (0, 0) → X Address (383, 0) *1 ...

  • Toshiba SL-9000-FFH-CA - page 57

    11. PROGRAMMED DATA VERIFICATION REPORTS 11. PROGRAMMED DATA VERIFICATION REPORTS 11- 1 11. PROGRAMMED DATA VERIFICATION REPORTS The programmed data can be printed on journal paper. Before issuing these reports, load the journal paper. The programmed data verification reports cannot be issued with any label. The keys to be used in the following pro ...

  • Toshiba SL-9000-FFH-CA - page 58

    11. PROGRAMMED DATA VERIFICATION REPORTS 11. PROGRAMMED DATA VERIFICATION REPORTS 11- 2 Table 7 Menu # Report Name Contents 50 PLU programmed data report All the preset PLU data are listed in the PLU # order (from small to large #). 51 Commodity description report All the preset commodity names are listed in the PLU # order (from small to large #). ...

  • Toshiba SL-9000-FFH-CA - page 59

    12. PASSWORD SECURITY 12.1 SETTING PASSWORD AND PROTECT MENU 12- 1 12. PASSWORD SECURITY You can protect all menus (except REG. menu) and set two step passwords for access to protected menus. 12.1 SETTING PASSWORD AND PROTECT MENU P M R SX Z ○○○○ ー ○ P M R SX Z ×○○× ー ○ Select menus to be protected. <Menu> 0. PROG. 5. RE ...

  • Toshiba SL-9000-FFH-CA - page 60

    12. PASSWORD SECURITY 12.1 SETTING PASSWORD AND PROTECT MENU 12- 2 P M R SX Z ○×○○ ー × Enter password B in 4 digits. Exclude menus to which password B cannot access. ○ : Valid × : Invalid ー : Not need 1 2 3 4 2 6 w NOTES: 1. Select validity of the password by pressi ng the key 2. When the same password is entered for password A and B ...

  • Toshiba SL-9000-FFH-CA - page 61

    12. PASSWORD SECURITY 12.2 CALLING MENU BY ENTERING PASSWORD 12- 3 12.2 CALLING MENU BY ENTERING PASSWORD NOTE: When the password is unknown, enter “ HELP ” instead, and you can access only security menu. <Menu> 0. PROG. 5. REPORT 1. REG. 6. RESET 2. MARK DOWN 7. 3. REWRAP 8. 4. SECURITY 9. Enter a menu No. to Accessible with the password ...

  • Toshiba SL-9000-FFH-CA - page 62

    13. OPERATING PROCEDURES ■ NOTES BEFORE STARTING OPERATION 13- 1 13. OPERATING PROCEDURES ■ NOTES BEFORE STARTING OPERATION ■ How to access REG., M.DOWN, or REWRAP menu (1) Turn the power ON. (2) A sixteen-second scanning will be performed after pressing the key. (3) Should a power failure occur during operation, remove the commodity from the ...

  • Toshiba SL-9000-FFH-CA - page 63

    13. OPERATING PROCEDURES 13.1 WEIGHING OPERATION 13- 2 13.1 WEIGHING OPERATION Menu: REG., M.DOWN, or REWRAP Mode: WEIGH The weigh mode is used to weigh a commodity and to issue the label. The label contains data such as a weight, unit price (price per weight) and total price (calculated as a result of the weighing operation). The following is a ba ...

  • Toshiba SL-9000-FFH-CA - page 64

    13. OPERATING PROCEDURES 13.2 FIX PRICE OPERATION (FOR US TYPE ONLY) 13- 3 13.2 FIX PRICE OPERATION (FOR US TYPE ONLY) The FIX mode (Fix Price Mode) is used to issue a label for a commodity of a fixed price PLU (i.e. the price determined by the store), the weight of which may vary from commodity to commodity. In this mode, the Unit Price of the com ...

  • Toshiba SL-9000-FFH-CA - page 65

    13. OPERATING PROCEDURES 13.3 BY COUNT OPERATION 13- 4 13.3 BY COUNT OPERATION The BY-COUNT mode is used to issue the label of commodities of the same kind in a package (or may not be packed). The whole package quantity (or a certain quantity) and the whole package price (or the price per the quantity) are usually preset. Thus, it is not necessary ...

  • Toshiba SL-9000-FFH-CA - page 66

    13. OPERATING PROCEDURES 13.3 BY COUNT OPERATION 13- 5 Example) An open price item can be sold as below: ① 1 piece at 15 dollars ② 15 pieces at 10 dollars ③ 15 pieces sold at 0.5 dollars per 10 pieces Enter the PLU #. 5 1 PLU 1 5 FOR Press: Press: ex.) ③ 1 0 FOR 5 0 ex.) ① ex.) ② 1 5 PRT * Press: Enter quantity Enter quantity Enter tota ...

  • Toshiba SL-9000-FFH-CA - page 67

    13. OPERATING PROCEDURES 13.4 PRINT COUNT OPERATION 13- 6 13.4 PRINT COUNT OPERATION With this procedure, a specified number of the same labels can be issued. Menu: REG., M.DOWN, or REWRAP Mode: WEIGH, FIX or BY-COUNT Example A) When operating in Weigh mode. NOTES: 1. A batch issue means to print labels continuously with the bac king paper attached ...

  • Toshiba SL-9000-FFH-CA - page 68

    13. OPERATING PROCEDURES 13.4 PRINT COUNT OPERATION 13- 7 Example B) When operating in Fix or By Count mode. Place a commodity on the platter. (Ex. 1.320 lb.) The label is issued with the mount paper attached. The label is issued. When all the specified numbers of labels are being issued. SPLIT PRICE operation Press : Set the number of labels. (Max ...

  • Toshiba SL-9000-FFH-CA - page 69

    13. OPERATING PROCEDURES 13.4 PRINT COUNT OPERATION 13- 8 Example C) When issuing only the nutrition information label. Note that nutrition information can be printed only on several types of label. Refer to Page 10-19. Manual issue Auto issue On-demand Batch On-demand Batch Issue mode Pre=0 Pre>=1 Pre=0 Pre>=1 Pre=0 Pre>=1 Pre=0 Pre>=1 ...

  • Toshiba SL-9000-FFH-CA - page 70

    13. OPERATING PROCEDURES 13.5 ISSUING LABELS WITH NET WEIGHT STATEMENT (FOR US TYPE ONLY) 13- 9 13.5 ISSUING LABELS WITH NET WEIGHT STATEMENT (FOR US TYPE ONLY) Menu: REG., M.DOWN, or REWRAP Mode: FIX When the initial settings #1-7 and #1-8 are set to 1, a Net Weight Statement is printed on the label. A unit price and a tare registered in each PLU ...

  • Toshiba SL-9000-FFH-CA - page 71

    13. OPERATING PROCEDURES 13.5 ISSUING LABELS WITH NET WEIGHT STATEMENT (FOR US TYPE ONLY) 13- 10 NOTES: 1. To print NET WT. data, from the FIX mode, load a label which has an area to print a NET WT. Statement. 2. The quantity sold number and price data in NET WT. statement operation will be accumulated in the memory. No weight data will be accumula ...

  • Toshiba SL-9000-FFH-CA - page 72

    13. OPERATING PROCEDURES 13.6 TARE/SAVE FUNCTION PROCEDURES 13- 11 13.6 TARE/SAVE FUNCTION PROCEDURES Menu: REG., M.DOWN, or REWRAP Mode: WEIGH or FIX (Tare % function is available in WEIGH mode only.) NOTES: 1. Tare subtraction is available up to 2.000 lb. for the US type, and up to 1.000kg (2.205lb) for the CA/QR type. When tare subtraction is in ...

  • Toshiba SL-9000-FFH-CA - page 73

    13. OPERATING PROCEDURES 13.7 CALLING AND PRINTING GRADE LINES 13- 12 13.7 CALLING AND PRINTING GRADE LINES A grade line is a short message added to a commodity name. A grade line can be selected from maximum of 49 programmed grade lines and printed on the label. Menu: REG., M.DOWN, or REWRAP Mode: WEIGH or FIX, or BY COUNT Enter the PLU #. 3 1 PLU ...

  • Toshiba SL-9000-FFH-CA - page 74

    13. OPERATING PROCEDURES 13.8 CALLING AND PRINTING LOGOS 13- 13 13.8 CALLING AND PRINTING LOGOS When the initial set #10-7 is set to “ 1 ” (or “ 2 ” : SL-9000N only), a logo containing a picture, a mark, a POP message, etc., can be printed on the ingredient label having 12 lines or more. Logo data is created on the PC and stored into the me ...

  • Toshiba SL-9000-FFH-CA - page 75

    13. OPERATING PROCEDURES 13.9 SELECTING PRINT ITEM 13- 14 13.9 SELECTING PRINT ITEM Menu: REG, M.DOWN, or REWRAP Mode: WEIGH, FIX, or BY COUNT Entry Item Entry Item 1 Packed on date Print/Non Print 9 Piece count Print/Non Print 2 Sell by date Print/Non Print 10 Cooked by date Print/Non Print 3 Commodity name Print/Non Print 11 SP/Info./Net Wt. Prin ...

  • Toshiba SL-9000-FFH-CA - page 76

    13. OPERATING PROCEDURES 13.9 SELECTING PRINT ITEM 13- 15 13.10 DATE CHANGE The date can be changed temporarily. Menu: REG., M.DOWN, or REWRAP Mode: WEIGH, FIX, or BY COUNT NOTES: 1. A store code can be printed in place of a ‘ packed on date ’ and ‘ sell by date ’ by changing the initial settings #6-5 and #6-6. To print a store code, select ...

  • Toshiba SL-9000-FFH-CA - page 77

    13. OPERATING PROCEDURES 13.11 BATCH PRINT MODE (with 30 Items Run Assignment) 13- 16 13.11 BATCH PRINT MODE (with 30 Items Run Assignment) Menu: REG., M.DOWN, or REWRAP Mode: FIX, or BY COUNT Up to 99 labels per PLU can be issued in non-scale mode. Up to 30 items can be preset. (However, 0 is preset, issuing will be canceled.) Enter the PLU #. 1 P ...

  • Toshiba SL-9000-FFH-CA - page 78

    13. OPERATING PROCEDURES 13.11 BATCH PRINT MODE (with 30 Items Run Assignment) 13- 17 ● Unit Price Change and G.Line/LOGO Call *1 By call ing the PLU designation LOGO, the LOGO can be designated per PLU and printed. When the PLU dose not designate the LOGO, the LOGO programmed before entering Batch Print Mode is printed. Enter the quantity. Call ...

  • Toshiba SL-9000-FFH-CA - page 79

    13. OPERATING PROCEDURES 13.11 BATCH PRINT MODE (with 30 Items Run Assignment) 13- 18 ● Label Issue Stop or Cancel Cancel output PRT * z C Clear an error or stop label issuing. Press: Stop issuing the labels and cancel PLUs which have not been output. A VOID C Completed NOTES: 1. When the label for NET.WT statement is not selected, pressing the k ...

  • Toshiba SL-9000-FFH-CA - page 80

    13. OPERATING PROCEDURES 13.12 VISUAL COMMODITY LIBRARY 13- 19 13.12 VISUAL COMMODITY LIBRARY Menu: REG., M.DOWN, or REWRAP Mode: WEIGH, FIX, or BY COUNT In the following procedure, entering a group # (the upper two digits of PLU#) allows you to call 6 commodities which belong to the group. This function is convenient when calling a commodity which ...

  • Toshiba SL-9000-FFH-CA - page 81

    13. OPERATING PROCEDURES 13.13 FLOATING VENDOR 13- 20 13.13 FLOATING VENDOR Menu: REG Mode: WEIGH, FIX, or BY COUNT Floating vendor function allows you to register different commodities sales together. This function is available when the Initial Setting #11-1 is set to 1 and using a receipt. Be sure to select IN-LINE in Section 10.15 LON SYSTEM eve ...

  • Toshiba SL-9000-FFH-CA - page 82

    13. OPERATING PROCEDURES 13.13 FLOATING VENDOR 13- 21 ■ Price deletion Prices already registered can be deleted in the following procedure. ■ Subtotal The following procedure will sum up all of the registered items. VOID PRT * Enter vendor #. NEXT PLU or VOID C Enter the deletion mode. NEXT PLU: the next item VOID: the previous item Delete a re ...

  • Toshiba SL-9000-FFH-CA - page 83

    14. TOTAL OPERATION 14. TOTAL OPERATION 14- 1 14. TOTAL OPERATION In Report or Reset mode you can issue a sales report or reset report with either a label or journal paper. Menu: REPORT or RESET REPORT The totals will not be cleared as they are printed on labels or journal paper. RESET The totals will be cleared as they are printed on labels or jou ...

  • Toshiba SL-9000-FFH-CA - page 84

    14. TOTAL OPERATION 14.1 HOURLY TOTAL REPORT 14- 2 14.1 HOURLY TOTAL REPORT Ex.) REPORT Menu 14.2 GRAND TOTAL REPORT 14.3 PLU TOTAL REPORT 0 PRT * NOTES : 1. When issuing an hourly report, hours with no sales are not printed. 2. An hourly report is printed as follows: 1) Label: Issued sequentially in on-demand mode. 2) Journal paper: Issued with jo ...

  • Toshiba SL-9000-FFH-CA - page 85

    14. TOTAL OPERATION 14.4 VENDOR TOTAL REPORT 14- 3 14.4 VENDOR TOTAL REPORT A Individual Total Ex.) Individual PLU Total (PLU #100) B Block Total Ex.) UPC Block Total (UPC #100100 to 100199) C Zone Total Ex.) PLU Zone Total (PLU #100 to 107) D Entire PLU Total 100 1 1 0 0 ◇ ◇ NOTE : The key represents 0 through 9. The most significa nt digit in ...

  • Toshiba SL-9000-FFH-CA - page 86

    15. ERROR MESSAGE TABLE 15. ERROR MESSAGE TABLE 15- 1 15. ERROR MESSAGE TABLE Take the following action if an error message has appeared on the commodity name display along with the buzzer sounding. ● Programming Mode Message Cause Solution DATA ENTRY ERROR Error in key input. Press the key, and re-input the right data. MEMORY FULL No memory spac ...

  • Toshiba SL-9000-FFH-CA - page 87

    15. ERROR MESSAGE TABLE 15. ERROR MESSAGE TABLE 15- 2 ● Label lssue Mode ● Report and Reset Mode Message Cause Solution DATA ENTRY ERROR Error in key input. Press the key, and re-input the right data. PLU NOT FOUND The PLU # being called out is not registered. Press the key, and check the PLU #. TOTALS OVERFLOW GRAND TOTAL or PLU TOTAL memory h ...

  • Toshiba SL-9000-FFH-CA - page 88

    15. ERROR MESSAGE TABLE 15. ERROR MESSAGE TABLE 15- 3 ● CMT Operation Mode ● LON System Mode M: Master scale BM: Backup master scale S: Satellite scale Message Cause Solution Mismatch of the model type. Mismatch of the base unit. Mismatch of the VERSION. Mismatch of the TRANSMITTING DATA. MISMATCH SCALE SPEC Mismatch of the scale capacity. Pres ...

  • Toshiba SL-9000-FFH-CA - page 89

    16. CLEANING THE PRIT HEAD 16. CLEANING THE PRINT HEAD 16- 1 16. CLEANING THE PRINT HEAD If the print head is dirty, printing will not be clear. The print head should be cleared with a print head cleaner everyday before use, according to the following procedure: 1. Open the printer cover and turn the head-up lever to the anticlock wise. (See page 8 ...

  • Toshiba SL-9000-FFH-CA - page 90

    17. TROUBLESHOOTING 17. TROUBLESHOOTING 17- 1 17. TROUBLESHOOTING ■ Before You Call for Service It is our primary concern to give you full satisfaction and better service. If, however, any problem arises in connection with the operation of this scale, please check the following points before calling for service: A) Is the power plug fully plugged ...

  • Toshiba SL-9000-FFH-CA - page 91

    ...

  • Toshiba SL-9000-FFH-CA - page 92

    PRINTED IN SINGAPORE EM1-31076E E ...

Manufacturer Toshiba Category Scale

Documents that we receive from a manufacturer of a Toshiba SL-9000-FFH-CA can be divided into several groups. They are, among others:
- Toshiba technical drawings
- SL-9000-FFH-CA manuals
- Toshiba product data sheets
- information booklets
- or energy labels Toshiba SL-9000-FFH-CA
All of them are important, but the most important information from the point of view of use of the device are in the user manual Toshiba SL-9000-FFH-CA.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Toshiba SL-9000-FFH-CA, service manual, brief instructions and user manuals Toshiba SL-9000-FFH-CA. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Toshiba SL-9000-FFH-CA.

Similar manuals

A complete manual for the device Toshiba SL-9000-FFH-CA, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Toshiba SL-9000-FFH-CA by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Toshiba SL-9000-FFH-CA.

A complete Toshiba manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Toshiba SL-9000-FFH-CA - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Toshiba SL-9000-FFH-CA, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Toshiba SL-9000-FFH-CA, that we can find in the current document
3. Tips how to use the basic functions of the device Toshiba SL-9000-FFH-CA - which should help us in our first steps of using Toshiba SL-9000-FFH-CA
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Toshiba SL-9000-FFH-CA
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Toshiba SL-9000-FFH-CA in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Toshiba SL-9000-FFH-CA?

Use the form below

If you did not solve your problem by using a manual Toshiba SL-9000-FFH-CA, ask a question using the form below. If a user had a similar problem with Toshiba SL-9000-FFH-CA it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)