English dropdown-ico

Manual Swan SI9031N

13 pages Not applicable
Download

Go to site of 13

Summary
  • Swan SI9031N - page 1

    ...

  • Swan SI9031N - page 2

    Important safeguards 2 1. Make sure to read all the safety precautions below and look at the illustrations before you start using the appliance. 2. Use the appliance for its intended use only . 3. The appliance is intended for household use only . 4. In order to protect against the risk of electric shock, do not immerse iron ､ power base into wat ...

  • Swan SI9031N - page 3

    3 Parts and Features 1. W ater tank 2. Handle 3. Soleplate 4. Heating indicator light 5. Steam button 6. Steam button lock 7. Steam button 8. T emperature control dial 9. Power cord/Supply hose 10. Power cord 1 1. Handle Button 12. Heating indicator light (Power base) 13. Pump working indicator light 14. Filling indicator light 15. Filter replaceme ...

  • Swan SI9031N - page 4

    4 Fabric Setting Chart T emperature Setting Fabric SYNTHETIC WOOL SILK COTTON Linen Max Ironing Instruction Steam Selection T emperature control dial Synthetics, Silk, Nylon, Arcrylic, Acetate Wool, Polyester Rayon cotton, Linen Rayon cotton, Linen Dry Iron on the opposite side of the fabric Use a press cloth and Steam Iron on the opposite side of ...

  • Swan SI9031N - page 5

    1. Follow up the ironing instructions on the garment label. If there is not any instruction label, but you know what the fabric is, please refer to the fabric setting chart described in this instruction manual. 2. The fabric setting chart is only valid for plain fabrics and not for materials to which finishes, glosses etc, have been applied. T exti ...

  • Swan SI9031N - page 6

    6 1. Check if the rating indicated in the rating plate corresponding to the main voltage in your home 2. Press handle buttons to lay handle down. Fig.1 (Note: When handle is up, the unit is shut off, it will be ON when handle is laid down.) 3. Remove any protective foil or sticker or card from the soleplate. 4. Fully unwind and straighten the power ...

  • Swan SI9031N - page 7

    7 1. After power On, water tank indicator light will light up. W ater tank indicator light blinks to show that no water or not enough water is in the tank, please fill water to Max level. After filling with water , water tank indicator light will light up steadily for easy viewing of water level. 2. W ater tank indicator light will not light up whe ...

  • Swan SI9031N - page 8

    1. Connect the appliance to a suitable socket outlet. Press power switch on control panel, a Beep sound will be heard and the power indicator light lights up. It shows that the unit has been connected to the power supply .Press steam selection switch to turn off all 3 steam indicator lights ,it is ready for dry ironing. 2. Set temperature control d ...

  • Swan SI9031N - page 9

    9 How to use your steam generator Follow the steam ironing process, and then hold the iron in vertical position between 5cm and 15cm away from the hanged fabrics. (Fig.6) Press the steam button, and then will create vertical steam. This feature is especially used for removing creases from hanging clothes and curtains. Never steam garments whilst we ...

  • Swan SI9031N - page 10

    10 How to use your steam generator 1. A filter checking system is built into this appliance. It can detect the working time for the filter . Once the filter is invalid ,the filter replacement indicator light on control panel will continuously blink to indicate that the filter needs to be replaced (Fig.8) . 2. Replacement Method: Slide water tank ou ...

  • Swan SI9031N - page 11

    11 1. The filter is designed to reduce the build-up of limescale which occurs during steam ironing, this will prolong the working life of your iron. However , please note that the filter will not completely stop the natural process of limescales build-up. 2. After the filter is invalid, even if a new one is not available at that time. The filter ca ...

  • Swan SI9031N - page 12

    1. Disconnect the appliance from the power supply and allow the appliance to cool down for 60 minutes at least. 2. After use, slide out the water tank and pour out all the remaining water . (Fig.16) 3. The iron should be place on the iron rest plate, and then stored. Handle attached to the base unit used for carrying the appliance, it also serves a ...

  • Swan SI9031N - page 13

    13 Problems Iron won’t heat Droplets of water escape from the soleplate W ater tank decoration indicator light OFF All indicator light OFF Iron does not produce steam W ater tank light blinks. T wo BEEP sounds alarm when pressing the steam button. Possible causes Incorrect connection to the main socket Re-plug the unit to main socket. T emperatur ...

Manufacturer Swan Category Iron

Documents that we receive from a manufacturer of a Swan SI9031N can be divided into several groups. They are, among others:
- Swan technical drawings
- SI9031N manuals
- Swan product data sheets
- information booklets
- or energy labels Swan SI9031N
All of them are important, but the most important information from the point of view of use of the device are in the user manual Swan SI9031N.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Swan SI9031N, service manual, brief instructions and user manuals Swan SI9031N. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Swan SI9031N.

Similar manuals

A complete manual for the device Swan SI9031N, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Swan SI9031N by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Swan SI9031N.

A complete Swan manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Swan SI9031N - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Swan SI9031N, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Swan SI9031N, that we can find in the current document
3. Tips how to use the basic functions of the device Swan SI9031N - which should help us in our first steps of using Swan SI9031N
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Swan SI9031N
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Swan SI9031N in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Swan SI9031N?

Use the form below

If you did not solve your problem by using a manual Swan SI9031N, ask a question using the form below. If a user had a similar problem with Swan SI9031N it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)