English dropdown-ico

Manual Farallon Communications NetopiaTM

66 pages 0.71 mb
Download

Go to site of 66

Summary
  • Farallon Communications NetopiaTM - page 1

    Netopia  ISDN PC Card User’s Guide for Windows F on arall  ...

  • Farallon Communications NetopiaTM - page 2

    Copyright © 1997 Farallon Communications, Inc. v .597 All rights reser ved. Printed in the U.S.A. This manual and any associated ar twork, software, and product designs are copyrighted with all rights reser ved. Under the copyright laws this manual, ar twork, software, and product designs may not be copied, in whole or par t, without the written c ...

  • Farallon Communications NetopiaTM - page 3

    3 Contents Chapter 1 — About the Netopia ISDN PC Card............................... 5 Chapter 2 — Installation............................................................... 7 Step 1: Inserting the PC Card .........................................................7 Step 2: Connecting your equipment .............................................. ...

  • Farallon Communications NetopiaTM - page 4

    4 Contents Chapter 5 — Operation ............................................................... 31 Making a connection ................................................................... 31 Windows 95 ............................................................................. 32 Windows NT 4.0 .................................................. ...

  • Farallon Communications NetopiaTM - page 5

    5 Chapter 1 About the Netopia ISDN PC Car d Congratulations on your purchase of the Farallon Netopia  ISDN PC Card! The Netopia ISDN PC Car d provides easy and af fordable high-speed Basic Rate ISDN connection to the Internet or to your of fice local area network (LAN). Internet access. The Netopia ISDN PC Card allows Inter net connec- tions ov ...

  • Farallon Communications NetopiaTM - page 6

    6 Chapter 1 Y our plug and play ISDN solution. Once your telephone company has installed your ISDN line, you can inser t the Netopia ISDN PC Car d into your PC Card slot and enter appr opriate parameters to configure and use the card. A connection to your of fice LAN or the Inter net can be established over your ISDN line with a remote access cli ...

  • Farallon Communications NetopiaTM - page 7

    7 Chapter 2 Installation This chapter covers the three basic steps for installing your Netopia ISDN PC Card: (1) inser ting the PC Car d into your computer’s slot; (2) connecting your equipment; and (3) configuring the PC Card. S TEP 1: I NSERTING THE PC C ARD Hold the Netopia ISDN PC Card with the color ed label facing up and the ar row pointin ...

  • Farallon Communications NetopiaTM - page 8

    8 Chapter 2 S TEP 2: C ONNECTING YOUR EQUIPMENT Depending on the product you pur chased, the Netopia ISDN PC Card with U inter face or the Netopia ISDN PC Card with S/T inter face, the appropriate equipment is pr ovided. Y our geographical location typically dictates the ISDN inter face type to use. The following table summarizes the inter face and ...

  • Farallon Communications NetopiaTM - page 9

    Installation 9 S/T I NTERFACE Outside of Nor th America, ISDN connections ar e made using the S/T inter face. Plug the RJ-45 cable into your ISDN wall jack. Then connect the cable to the RJ-45 por t on the S/T inter face connector . Connecting the S/T inter face connector and RJ-45 cable In Australia, a dif ferent S/T inter face is used, and a ter ...

  • Farallon Communications NetopiaTM - page 10

    10 Chapter 2 C ONNECTING YOUR INTERFACE TO THE PC C ARD T o connect your inter face to the PC Car d, position the connector with the embossed ar rows towar d the card. Push it straight into the por t on the card. Then push the locking tab on the connector towar d your computer . Attaching the inter face connector to the PC Car d S TEP 3: C ONFIGURI ...

  • Farallon Communications NetopiaTM - page 11

    Installation 11 W INDOWS 95 1. The first time you inser t the Netopia ISDN PC Car d, the New Har d- ware Found scr een appears: 2. Be sure that “Driver fr om disk provided by har dware manufac- turer” is selected, and click OK. The Install Fr om Disk screen appears: 3. Inser t the Netopia ISDN PC Car d Disk 1, then click OK. 4. Go to Chapter 3 ...

  • Farallon Communications NetopiaTM - page 12

    12 Chapter 2 W INDOWS NT 4.0 1. Open the Control Panel and select Modems. 2. Click Add in the Modems Proper ties screen. 3. Select “Don’t detect my modem”, then click Next. Netopia COM2 x ...

  • Farallon Communications NetopiaTM - page 13

    Installation 13 4. Select Have Disk. 5. Inser t Netopia ISDN PC Car d Disk 1, then click OK. The Netopia .INF file will be installed. ...

  • Farallon Communications NetopiaTM - page 14

    14 Chapter 2 6. The Netopia ISDN PC Card will be detected. Select Netopia ISDN PC Card, then click Next. 7. Select COM Por t, then click Next. 8. Click Finish. 9. Go to Chapter 3, “Windows Configuration T ool,” and continue from there. Netopia ISDN PC Card Netopia ISDN PC Card ...

  • Farallon Communications NetopiaTM - page 15

    Installation 15 W INDOWS NT 3.51 1. Open the Accessories and select T er minal. 2. From the Settings menu, select Communications, and the follow- ing screen will appear: 3. Select a COM por t fr om the Connector list and click OK. 4. Type the following command: ATI8 If the response “Farallon Communications, Inc. Netopia ISDN PC Card” is r eturn ...

  • Farallon Communications NetopiaTM - page 16

    16 Chapter 2 W INDOWS 3. X AND DOS 1. Make sure that a Car d Ser vices software is installed on your com- puter . This section uses Car dSoft as an example, so the com- mands you enter may dif fer from those used her e. Refer to your vendor’s documentation for the cor rect commands, if needed. 2. Enter the following command at the prompt: C:CARD ...

  • Farallon Communications NetopiaTM - page 17

    17 Chapter 3 Windows Configuration T ool For Windows 95, Windows NT 4.0, and Windows NT 3.51, the Netopia ISDN PC Card Windows Configuration T ool provides an easy-to-use inter face for completing your PC Card configuration. The Windows Configuration T ool allows you to view the PC Card version and fir mware pr oper ties, configur e dialing a ...

  • Farallon Communications NetopiaTM - page 18

    18 Chapter 3 2. Click Next in the window that appears: 3. Specify where the Netopia ISDN PC Car d software is to be installed. 4. Click Next. The Setup Wizard will install all files and cr eate a Netopia ISDN PC Card pr ogram director y . Follow the on-screen instr uctions for inser ting the other disks. ...

  • Farallon Communications NetopiaTM - page 19

    Windows Configuration T ool 19 5. When the window below appears on your screen, click Finish. 6. The Netopia ISDN PC Card Configuration T ool launches and the Proper ties window appears: 7. Complete your PC Card configuration by continuing with the “Profile Configuration” section on the next page. ...

  • Farallon Communications NetopiaTM - page 20

    20 Chapter 3 P ROFILE CONFIGURATION Netopia ISDN PC Card configuration settings ar e saved into pro- files. Y our Netopia ISDN PC Card is alr eady equipped with a fac- tor y profile which r equires only your ISDN infor mation to establish a connection. Using the factor y profile as a basis, you can cr eate your own profile. Up to thr ee user-d ...

  • Farallon Communications NetopiaTM - page 21

    Windows Configuration T ool 21 ■ Nor th American Pr ofile Configuration window: ■ International Pr ofile Configuration window: A profile holds the phone numbers for up to two locations, with one being designated as the Primar y Location, and the other as the Alternate Location. It makes no dif ference which number is specified where, as ...

  • Farallon Communications NetopiaTM - page 22

    22 Chapter 3 4. For either the Primar y or Alter nate Location, the following parameters must be configured: Note: Communications using PPP or V .120 only use a single B-channel, whereas Multilink PPP connections r equire the configuration of a second B-channel. 5. Click OK to close the Profile Configuration window . 6. In the lower half of the ...

  • Farallon Communications NetopiaTM - page 23

    Windows Configuration T ool 23 U PDATING FIRMWARE This section tells you how to load fir mware into your PC Car d’s ROM. Y ou may need to do this in order to use your PC Car d in a dif ferent geographical r egion, or simply to update your PC Card with new fir mware versions. T o download fir mware into your PC Card, follow the steps below . 1 ...

  • Farallon Communications NetopiaTM - page 24

    24 Chapter 3 2. Click the Proper ties button. The Car d Proper ties screen appears: 3. Per for m one of the following: T o download: Follow these steps: Dif ferent regional fir mware a. Select your geographic location within the ISDN Type field. b. Confir m your fir mware change by clicking Y es in the Configuration T ool’s prompt window . N ...

  • Farallon Communications NetopiaTM - page 25

    25 Chapter 4 VT100 Configuration T ool For Windows 3.x and DOS, the Netopia ISDN PC Card VT100 Con- figuration T ool provides a quick and easy way to complete your PC Card configuration. The VT100 Configuration T ool is built into the Netopia ISDN PC Card fir mwar e and lets you configure basic ISDN- specific parameters. It is also available ...

  • Farallon Communications NetopiaTM - page 26

    26 Chapter 4 2. V erify that the ter minal emulation program uses the same COM por t that the Netopia ISDN PC Car d is emulating. 3. Enter the following command at the prompt and pr ess Enter: AT@MENU The main VT100 Configuration T ool screen appears: VT100 C ONFIGURATION T OOL SCREEN NAVIGATION The following table lists the keys used to move with ...

  • Farallon Communications NetopiaTM - page 27

    VT100 Configuration T ool 27 4. Select the B-channel protocol to be used. The pr otocol you select must match the protocol on the r eceiving system. Note: Communications using PPP or V .120 only use a single B-channel, whereas Multilink PPP connections r equire the configuration of a second B-channel. 5. Complete your PC Card configuration by co ...

  • Farallon Communications NetopiaTM - page 28

    28 Chapter 4 P ROFILE CONFIGURATION Netopia ISDN PC Card configuration settings ar e saved into pro- files. Y our Netopia ISDN PC Card is alr eady equipped with a fac- tor y profile which r equires only your ISDN infor mation to establish a connection. Using the factor y profile as a basis, you can cr eate your own profile. Up to thr ee user-d ...

  • Farallon Communications NetopiaTM - page 29

    VT100 Configuration T ool 29 The Nor th American and Inter national fir mwar e versions each have their own screen. ■ Nor th American version: ■ International version: ...

  • Farallon Communications NetopiaTM - page 30

    30 Chapter 4 3. For either the Primar y or Alter nate Location, the following parameters must be configured: Once complete, press Escape to exit the ISDN Parameters menu. 4. From the Main Menu, select Save Pr ofile and press Enter to save the changes made to the profile. 5. Select Restar t Car d. V erify that the cor rect star tup pr ofile is s ...

  • Farallon Communications NetopiaTM - page 31

    31 Chapter 5 Operation Once you have installed and configured your Netopia ISDN PC Card, you ar e ready to dial into your of fice or to the Inter net. Computers with the Netopia ISDN PC Card connecting to private LANs and to the Internet Before pr eceeding, be sure you have r emote access client soft- ware, such as Micr osoft Dial-Up Networking, ...

  • Farallon Communications NetopiaTM - page 32

    32 Chapter 5 W INDOWS 95 1. Open Dial-Up Networking. 2. Click Make New Connection. The Make New Connection Wiz- ard appears: 3. Select the Netopia ISDN PC Card, then click Next. 4. Enter the telephone number and countr y code of the location you wish to call, then click Next. ...

  • Farallon Communications NetopiaTM - page 33

    Operation 33 5. Click Finish. 6. In the Dial-Up Networking window , double-click My Connection. 7. Enter your user name and password, then click Connect. 8. If the connection was successfully completed, you can com- municate with the remote host. If the connection could not be established, verify your Ser ver Type and TCP/IP settings and alter them ...

  • Farallon Communications NetopiaTM - page 34

    34 Chapter 5 W INDOWS NT 4.0 1. Open Dial-Up Networking. 2. Click New . The New Phonebook Entr y Wizar d appears. ...

  • Farallon Communications NetopiaTM - page 35

    Operation 35 3. Click Next. The Ser ver window appears: 4. Check all the statements that apply , then click Next. The Phone Number window appears: ...

  • Farallon Communications NetopiaTM - page 36

    36 Chapter 5 5. Enter the phone number of the location you are calling, then click Next. 6. Click Finish. This takes you back to the Dial-Up Networking window . 7. Click Dial. 8. Enter your user name and password, then click OK. 9. If the connection was successfully completed, you can com- municate with the remote host. If the connection could not ...

  • Farallon Communications NetopiaTM - page 37

    Operation 37 W INDOWS NT 3.51 For RAS connections, open the WFWNTEIC.INF file from the Neto- pia ISDN PC Card Disk with a text editor and add the entir e con- tents to your system’s MODEM.INF file. Save this file and restar t your computer for the changes to take ef fect. 1. In the Program Manager , double-click Remote Access Ser vice. 2. Doub ...

  • Farallon Communications NetopiaTM - page 38

    38 Chapter 5 4. Enter the name and phone number of the location you are calling, then click OK. 5. Click Dial. 6. Enter your user name and password, then click OK. 7. If the connection was successfully completed, you can com- municate with the remote host. If the connection could not be established, verify your configu- ration and TCP/IP settings, ...

  • Farallon Communications NetopiaTM - page 39

    Operation 39 W INDOWS 3. X 1. Ensure that ShivaRemote connectivity softwar e has been installed on your computer . 2. Click ShivaRemote Connect. 3. Enter your dial-in name, password, and the phone number to be dialed. 4. Click Por t Setup fr om the T ools menu. Select Netopia ISDN PC Card as the modem, then click OK. Netopia ISDN PC Cård ...

  • Farallon Communications NetopiaTM - page 40

    40 Chapter 5 5. In the ShivaRemote Connect window , click Options. 6. Enable at least one of the Desired Pr otocols (e.g., IPX or IP), then click OK. 7. In the ShivaRemote Connect window , click Connect. 8. If the connection was successfully completed, you can com- municate with the remote host. If the connection could not be established, verify yo ...

  • Farallon Communications NetopiaTM - page 41

    Operation 41 DOS 1. Ensure that ShivaRemote connectivity softwar e has been installed on your computer . 2. Enter the following command: C:SHIVACONNECT 3. Select Por t Setup fr om the T ools menu, then select the COM por t. 4. Select Modem. Y ou need to create a modem pr ofile. Enter Netopia ISDN PC Card as the modem and set the speed to 115200 ...

  • Farallon Communications NetopiaTM - page 42

    42 Chapter 5 6. Enable at least one of the Desired Pr otocols (e.g., IP or IPX), then select OK. 7. Back in the Connect screen, enter your user name, passwor d, and the phone number to be dialed, then select Connect. 8. If the connection was successfully completed, you can com- municate with the remote host. If the connection could not be establish ...

  • Farallon Communications NetopiaTM - page 43

    Operation 43 For Windows 95 and Windows NT 4.0 only . When making long-dis- tance calls, the Countr y Code, Area Code, and PBX Prefix (if requir ed) must be included in the dialing string for the second B- channel. For example, to make a Multilink PPP connection to the numbers 1-510-555-1212 and 1-510-555-1213 respectively , the dialing string wou ...

  • Farallon Communications NetopiaTM - page 44

    44 Chapter 5 U SING OTHER COMMUNICATIONS APPLICATIONS Y our Netopia ISDN PC Card works with any standar d communications application that uses A T commands. When configuring your application, select the Netopia ISDN PC Card, if it is listed. If no special setting is available for Netopia, select a Hayes-compatible modem configuration, such as “ ...

  • Farallon Communications NetopiaTM - page 45

    Operation 45 D ATA COMPRESSION Data compression is a pr ocess where the ef fective thr oughput is increased by encoding data in such a way that fewer bits ar e requir ed to repr esent it. Popular compression algorithms typically reduce the size of the data by half, ef fectively doubling the rate at which it is transmitted. And with four-to-one comp ...

  • Farallon Communications NetopiaTM - page 46

    ...

  • Farallon Communications NetopiaTM - page 47

    47 Chapter 6 T roubleshooting This chapter provides infor mation on tr oubleshooting problems that may arise while you are using your Netopia ISDN PC Car d. Many factors may cause a communications problem: your device, the cables, the telephone line, the remote device, or the Netopia ISDN PC Card itself. T o isolate the problem, consider the follow ...

  • Farallon Communications NetopiaTM - page 48

    48 Chapter 6 Depending upon the location you are dialing, ther e may be an incompatible local or toll telephone company . Though this is uncommon, if you suspect a telephone company problem when dialing local or toll data connections, contact your local telephone company and have it verify that you can dial a data call to the destination telephone ...

  • Farallon Communications NetopiaTM - page 49

    Troubleshooting 49 ■ 0x10 - Nor mal Call Clearing. As far as the ISDN network is concerned, the call completed nor mally , but one of the two devices chose to hang up and the other device acknowledged it. Y ou would get this code if your client software was able to connect to the ser ver device, but some element of the configuration, such as the ...

  • Farallon Communications NetopiaTM - page 50

    50 Chapter 6 pany to see how many digits their switches are expecting for the data rate (i.e., 56 kbps or 64 kbps per B-channel) that you intend to use. ■ 0x6F - Protocol Er r or , Unspecified. This cause is com- monly receieved when tr ying to dial fr om a Centrex ISDN line without putting a 9 at the beginning of the number . S OLUTIONS TO COMM ...

  • Farallon Communications NetopiaTM - page 51

    Troubleshooting 51 T HE “COM P ORT IS EITHER IN USE OR UNAVAILABLE ” OR “P ORT NOT OPEN ” ERROR MESSAGE APPEARS . An incor rect Inter r upt Request Line (IRQ) may be assigned to the COM por t. Most computers have pr e-assigned an IRQ# to each COM#. These include the following: ■ COM1 and IRQ4 ■ COM2 and IRQ3 ■ COM3 and IRQ4 ■ COM4 a ...

  • Farallon Communications NetopiaTM - page 52

    52 Chapter 6 T o stop the Xmit test, press Enter again; the Netopia ISDN PC Card r esponds with the following: Xmit test terminated W arning: The IRQ may conflict with another COM por t and cause the Netopia ISDN PC Card not to r espond to a simple $ test. Y ou may need to remove the mouse driver to diagnose the pr oblem. Y OUR COMPUTER BECOMES LO ...

  • Farallon Communications NetopiaTM - page 53

    53 Appendix A T echnical Specifications N ETOPIA ISDN PC C ARD F IRMWARE S PECIFICATIONS Software Featur e Suppor ted on T erminal Adapter W AN Protocols • PPP (Point-to-Point Protocol) • ISDN (Q.921/Q.931: NI-1, A T&T 5ESS Cus- tom, EuroISDN, TS013, and NTT JA TE) • V .120 PPP Features • PPP async-to-sync conversion • Multilink PPP ...

  • Farallon Communications NetopiaTM - page 54

    54 Appendix A N ETOPIA ISDN PC C ARD H ARDWARE S PECIFICATIONS PC C ARD CHARACTERISTICS The Netopia ISDN PC Card is an active communications car d with its own on-board pr ocessor that of floads low-level protocol processing tasks fr om the host computer . The Netopia ISDN PC Card has the following characteristics: ■ Full PC Card suppor t (Type ...

  • Farallon Communications NetopiaTM - page 55

    Technical Specifications 55 S UPPORTED ISDN SWITCH TYPES The following table lists the ISDN switch types and cor responding geographical regions suppor ted by the Netopia ISDN PC Card: The Netopia ISDN PC Card includes fir mwar e for both inside and outside of Nor th America. A change in location may r equire you to update the Netopia ISDN PC Car ...

  • Farallon Communications NetopiaTM - page 56

    56 Appendix A R EGULATORY NOTICES R EGULATORY INFORMATION FOR THE U NITED S TATES FCC W arning: Changes or modifications to this unit not expressly appr oved by Farallon Communications could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device ...

  • Farallon Communications NetopiaTM - page 57

    Technical Specifications 57 This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Inter fer ence Regulations of the Canadian Depar tment of Communications. Le présent appareil numérique n'émet pas de br uits radioélectriques dépassant les limites applicables aux ap ...

  • Farallon Communications NetopiaTM - page 58

    58 Appendix A Proximity to Hazar dous V oltages This infor mation is provided for the benefit of manufacturers of PCs which include a PC Card slot. Users should verify that their PC has been constr ucted in accordance with the following guidelines. In order to comply with safety regulations ther e must be adequate separation between Netopia ISDN P ...

  • Farallon Communications NetopiaTM - page 59

    59 Appendix B A T Commands The following table lists the Netopia ISDN PC Card A T commands. Commands marked with an asterisk (*) are configuration settings (static parameters) that do not take ef fect until the Netopia ISDN PC Card is restar ted. The lowercase letters c , n , s , and v are variables that take dif ferent types of values. Expanded e ...

  • Farallon Communications NetopiaTM - page 60

    60 Appendix B A T!E5=n V .120 N200 (Maximum Retr y Count) A T!E6=n V .120 T203 (Link Integrity Timer) A T!E7=n V .120 Idle Timer A T!N1=n * ISDN Primar y Director y Number A T!N11=n * ISDN Alternate Dir ector y Number A T!N2=n Primar y Director y Number #2 (for Multilink PPP) A T!N21=n Secondar y Director y Number #2 (for Multilink PPP) A T!N3=n * ...

  • Farallon Communications NetopiaTM - page 61

    A T Commands 61 A T>Hs View Help Information for Command s A T>VC View Current Pr ofile A T>VCC View the Call and COM Por t Dynamic Parameters A T>VCD View All Dynamic Parameters (Call, COM, V .120, PPP , MLPPP) A T>VCP View the Protocol Parameters (V .120, PPP , MLPPP) A T>VCS View All Static Parameters (ISDN, Rate Adaption) A T ...

  • Farallon Communications NetopiaTM - page 62

    62 Appendix B AT COMMAND RESULT CODES Result codes, or status messages, are displayed after an A T command is issued. Result codes can be displayed as a long-for m word message or as a shor t-for m number code. The Result Code For mat command (A TVn) deter mines shor t- or long-for m usage. The following table provides the AT command result codes i ...

  • Farallon Communications NetopiaTM - page 63

    63 Farallon Technical Suppor t Farallon is committed to providing its customers with r eliable products and excellent technical suppor t. Please take a moment now to fill out the registration car d enclosed in your Netopia ISDN PC Card package so that we can notify you about any updated product infor mation. Before contacting Farallon Customer Ser ...

  • Farallon Communications NetopiaTM - page 64

    64 Farallon Technical Support F ARALLON BBS Farallon Bulletin Board Ser vice: (510) 865-1321 Y ou can also contact the Farallon Bulletin Board Ser vice over your ISDN line. This allows you to test your ISDN connection and also download infor mation from the BBS. Farallon BBS ISDN line: (510) 864-5562 or (510) 864-5563 F ARALLON FAX-B ACK This ser v ...

  • Farallon Communications NetopiaTM - page 65

    W arranty L IMITED W ARRANTY AND L IMITATION OF R EMEDIES Farallon war rants to you, the end user , that the accompanying Farallon pr oduct, which may include third par ty products or technology (the “Pr oduct”) will be free from defects in materials and workmanship under nor mal use. This war ranty will expire five (5) years fr om date of pur ...

  • Farallon Communications NetopiaTM - page 66

    THE ABOVE W ARRANTIES ARE MADE BY FARALLON ALONE, AND THEY ARE the ONL Y W ARRANTIES MADE BY ANYONE REGARDING THE ENCLOSED PRODUCT . Farallon and its licensor(s) make no other war ranties, express or implied, including without limitation the implied war ranties of merchantability and fitness for a par ticular purpose, regar ding the enclosed produ ...

Manufacturer Farallon Communications Category Network Card

Documents that we receive from a manufacturer of a Farallon Communications NetopiaTM can be divided into several groups. They are, among others:
- Farallon Communications technical drawings
- NetopiaTM manuals
- Farallon Communications product data sheets
- information booklets
- or energy labels Farallon Communications NetopiaTM
All of them are important, but the most important information from the point of view of use of the device are in the user manual Farallon Communications NetopiaTM.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Farallon Communications NetopiaTM, service manual, brief instructions and user manuals Farallon Communications NetopiaTM. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Farallon Communications NetopiaTM.

Similar manuals

A complete manual for the device Farallon Communications NetopiaTM, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Farallon Communications NetopiaTM by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Farallon Communications NetopiaTM.

A complete Farallon Communications manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Farallon Communications NetopiaTM - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Farallon Communications NetopiaTM, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Farallon Communications NetopiaTM, that we can find in the current document
3. Tips how to use the basic functions of the device Farallon Communications NetopiaTM - which should help us in our first steps of using Farallon Communications NetopiaTM
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Farallon Communications NetopiaTM
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Farallon Communications NetopiaTM in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Farallon Communications NetopiaTM?

Use the form below

If you did not solve your problem by using a manual Farallon Communications NetopiaTM, ask a question using the form below. If a user had a similar problem with Farallon Communications NetopiaTM it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)