English dropdown-ico

Manual NEC Versa M540

25 pages 11.06 mb
Download

Go to site of 25

Summary
  • NEC Versa M540 - page 1

    NEC V ersa M540 Disassembly Manual ...

  • NEC Versa M540 - page 2

    NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 2 Table of contents Overview ....................................................................................................................... ..........................................3 Technician Notes ...................................................................................... ...

  • NEC Versa M540 - page 3

    NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 3 Overview This document contains st ep-by-steps disassembly in st ruction s for the Versa M5 40/EasyNote R7 chassis. The instructions are illustrated where nece ssary with im ages of the part that is being removed or disassembled. Furthermore, the screws th at are re moved are shown next to the ...

  • NEC Versa M540 - page 4

    NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 4 Hazardous Voltage There is hazardous voltage present insi de the computer when it is connect to an AC supply, even when the computer’s power switch is off. Exposure to hazardous voltage could cause personal injury. To avoid risk of injury, contact an Authorized Service Provider for proper (u ...

  • NEC Versa M540 - page 5

    NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 5 Removing the Battery Perform the following steps to remove t he battery: 1. Make sure to power off the unit. 2. Turn the unit upside down. 3. Unlock the left battery lock 4. Pushing battery lock on right outward an d sli de the ba ttery out of its place a s the arrow shows in Fig. 1 Fig. 1 Rem ...

  • NEC Versa M540 - page 6

    NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 6 Removing the Hard Disk Drive To remove the hard disk drive, first remove the battery (see Removing the Battery ), then perform the following steps: 1. Remove the screws on HDD cover a nd carefully open up as shown in Fig. 2 Fig. 2 Removing the Hard disk drive cover 2. Unscrew the HDD module an ...

  • NEC Versa M540 - page 7

    NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 7 3. Unscrew the four screws on both sid es of the hard disk drive as sh own in Fig. 4 Fig. 4 Unscrewing the hard disk drive shi eld screws Removing the Optical Disk Drive To remove the ODD, first remove the battery (see Removing the Battery ), then the HDD Cov er (see Removing the Hard Disk Dri ...

  • NEC Versa M540 - page 8

    NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 8 Removing the Memory Module To remove the Memory Module, first remove the Battery (see Removing the Battery ) then perform the following steps: 1. Release the screws retaining the memo ry module slot cover. Fig. 7 Removing the screw retaining the memory modul e slot cover 2. Unclip the memory m ...

  • NEC Versa M540 - page 9

    NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 9 Removing the WLAN Module and MDC Modem Module To remove the WLAN Module and MDC modem Module, first remove the Battery (see Removing the Battery ) then perform the following steps: 1. Release the screws retaining the WLA N/MDC cover. Fig. 9 Removing WLAN/MDC cover 2. Disconnect Wireless Antenn ...

  • NEC Versa M540 - page 10

    NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 10 Removing the CPU To remove the CPU, first remove the battery (see Removing the Battery ), then perform the following steps: 1. Remove the screw retaining the CPU Cover as shown in Fig. 12 Fig. 12 CPU Cover 2. Release all screws on the heat sink, discon ne ct the Fan co nnector and carefully r ...

  • NEC Versa M540 - page 11

    NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 11 3. Unlock the CPU and carefully remove it from the CPU socket as shown in Fig. 14 Fig. 14 Unlocking the CPU ...

  • NEC Versa M540 - page 12

    NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 12 Removing the Keyboard To remove the Keyboard, first remove the battery (see Removing the Battery ), then perfo rm the following steps: 1. Use flat screw driver to unlock Keyboard as shown in Fig. 15 Fig. 15 Unlock Keyboard 2. Lift up the keyboard and disconnect it fr om the system as shown in ...

  • NEC Versa M540 - page 13

    NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 13 Removing the Top Cover To remove the Top Cover, first remove the battery (see Removing the Battery ), remove the keyboard (se e Removin g the keyboard ), remov e the CPU (see Removing the CPU ), then perform the following steps: 1. Remove GPU Heat Sink by unscrew screw on it an d put it aside ...

  • NEC Versa M540 - page 14

    NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 14 3. Flip over the unit and remove the screws then disconnect touch pad flat cable as shown in Fig. 19 Fig. 19 Disconnect Touch Pad Flat Cable 4. Carefully lift up the top cove r, release it and put it aside. Fig. 20 Removing the Top Cover M2.5x7 Black ...

  • NEC Versa M540 - page 15

    NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 15 Removing the LCD Module To remove the LCD Module, first remove the Battery (se e Removi ng the Battery ), remove the Top Cover (see Removing the Top Co ver ) then perform the following steps: 1. Release LCD hinge cover by release screw on it as shown in Fig. 21 Fig. 21 Releasing LCD hinge cov ...

  • NEC Versa M540 - page 16

    NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 16 3. Release the LCD cable and WLA N ante nna cable as shown in Fig. 23 Fig. 23 Releasing the LCD ca ble and WLAN antenna cable 4. Release the screws on the LCD Hinge s as sho wn in Fig. 24 Fig. 24 Releasing the LCD Hing es 5. Carefully lift up the LCD module and place it in a safe place. M2.5x ...

  • NEC Versa M540 - page 17

    NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 17 Removing the LCD Panel To remove the LCD panel, first remove the LCD module (see Removing the LCD Modul e ), then perform the following steps: 1. Use a pin to remove the rubber covers on the LCD module a s sho wn in Fig. 25 2. Unscrew all screws shown in Fig. 25 Fig. 25 Screws on the LCD Modu ...

  • NEC Versa M540 - page 18

    NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 18 4. Unscrew all screws encircl ed in Fig. 27 Fig. 27 Removing the LCD panel screws 5. Release all four screws at the side of LCD Back Cover. Fig. 28 Remove Side s crews 6. Carefully lift up LCD panel together with the Inverter board and disconnect the po wer cable from the Inverter board. Disc ...

  • NEC Versa M540 - page 19

    NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 19 Removing the Main Board To remove the main board, first remove the Bottom Cover (See Removing the Bottom Cover ) then perform the following steps: 1. Remove side cover at both corner of the base unit as sho wn in Fig. 29 Fig. 29 Removing s ide cover 2. Release two screws at rear of the base u ...

  • NEC Versa M540 - page 20

    NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 20 3. Release all screws as shown in Fig. 31 and di sconn ect all speaker connection to Main Board. Fig. 31 Lifting up the Main Board assembly 4. Carefully lift up the Main Boar d together with System Brack et. Fig. 32 Lifting up Main board M2.5x5 Black ...

  • NEC Versa M540 - page 21

    NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 21 5. Remove two screws at the VGA port to separate Main Board from System Bracket. Fig. 33 Releasing System Bracket Removing the Multi Card Slot To remove the Multi Card Slot, fi rst remove the Main Board (see Removing the Main Board ), then perform the following steps: 1. Unscrew the screws on ...

  • NEC Versa M540 - page 22

    NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 22 Removing the Touch Pad To remove the touch pad, first remove the Top Cove r (see Rem ovin g the Top Cover ), then perform the following steps: 1. Unscrew the screws on t he Touch Pad assembly as shown in Fig. 35 and remove the touch pad assembly from the Top cover. Fig. 35 Touch Pad Removing ...

  • NEC Versa M540 - page 23

    NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 23 2. Carefully remove the Speaker assem bly from System Bracket and place it aside. 3. Removing screws on Woofer as shown i n Fig. 37 Fig. 37 Woofer 4. Carefully separate it from Bottom Cover. DIP Switch Setting No DIP Switch settings are available for the Versa M540/EasyNote R7. M2.5x7 Silver ...

  • NEC Versa M540 - page 24

    NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 24 Screws M2x3.5 Black M2.5x7 Black M2x11 Silver M2x7 Silver M2.5x17 Black M2x3 Silver M2.5x5 Black M2.5x5 Silver M3x7 Silver M2x4 Black M2.5x7 Silver ...

  • NEC Versa M540 - page 25

    NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 25 Notice The information in this guide is subject to change without notice. This guide contains information prote cted by copyright. No part of this guide may be photocopied or reproduced in any form or by any means without prior writt en consent from NEC Computers International BV. NEC COMPUTE ...

Manufacturer NEC Category Laptop

Documents that we receive from a manufacturer of a NEC Versa M540 can be divided into several groups. They are, among others:
- NEC technical drawings
- Versa M540 manuals
- NEC product data sheets
- information booklets
- or energy labels NEC Versa M540
All of them are important, but the most important information from the point of view of use of the device are in the user manual NEC Versa M540.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals NEC Versa M540, service manual, brief instructions and user manuals NEC Versa M540. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product NEC Versa M540.

Similar manuals

A complete manual for the device NEC Versa M540, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use NEC Versa M540 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of NEC Versa M540.

A complete NEC manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual NEC Versa M540 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the NEC Versa M540, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the NEC Versa M540, that we can find in the current document
3. Tips how to use the basic functions of the device NEC Versa M540 - which should help us in our first steps of using NEC Versa M540
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with NEC Versa M540
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of NEC Versa M540 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning NEC Versa M540?

Use the form below

If you did not solve your problem by using a manual NEC Versa M540, ask a question using the form below. If a user had a similar problem with NEC Versa M540 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)