Manual Zanussi ZEI6840FBV

16 pages Not applicable
Download

Go to site of 16

Summary
  • Zanussi ZEI6840FBV - page 1

    EN ZEI6840FBV User Manual Hob ...

  • Zanussi ZEI6840FBV - page 2

    Contents Safety information 2 Safety instructions 3 Product description 5 Daily use 6 Hints and tips 8 Care and cleaning 9 Troubleshooting 10 Installation 11 Technical information 14 Energy efficiency 15 Subject to change without notice. Safety information Before the installation and use of the appliance, carefully read the supplied instructions. T ...

  • Zanussi ZEI6840FBV - page 3

    • Unattended cooking on a hob with fat or oil can be dangerous and may result in fire. • Never try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket. • Do not store items on the cooking surfaces. • Metallic objects such as knives, forks, spoons and lids should not be placed ...

  • Zanussi ZEI6840FBV - page 4

    • Make sure the mains cable or plug (if applicable) does not touch the hot appliance or hot cookware, when you connect the appliance to the near sockets • Do not use multi-plug adapters and extension cables. • Make sure not to cause damage to the mains plug (if applicable) or to the mains cable. Contact an Authorised Service Centre or an elec ...

  • Zanussi ZEI6840FBV - page 5

    • Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. Disposal WARNING! Risk of injury or suffocation. • Contact your municipal authority for information on how to discard the appliance correctly. • Disconnect the appliance from the mains su ...

  • Zanussi ZEI6840FBV - page 6

    Sen- sor field Function Comment 1 ON / OFF To activate and deactivate the hob. 2 Lock / The Child Safety Device To lock / unlock the control panel. 3 - To select the cooking zone. 4 - Heat setting display To show the heat setting. 5 / - To set a heat setting. Heat setting displays Display Description The cooking zone is deactivated. - The cooking z ...

  • Zanussi ZEI6840FBV - page 7

    pan, a cloth, etc.). An acoustic signal sounds and the hob deactivates. Remove the object or clean the control panel. • the hob gets too hot (e.g. when a saucepan boils dry). Let the cooking zone cool down before you use the hob again. • you use incorrect cookware. The symbol comes on and the cooking zone deactivates automatically after 2 minut ...

  • Zanussi ZEI6840FBV - page 8

    connected to a single phase exceeds 3700 W. • The function decreases the power to the other cooking zones connected to the same phase. • The heat setting display of the reduced zones changes between two levels. Hints and tips WARNING! Refer to Safety chapters. Cookware For induction cooking zones a strong electro-magnetic field creates the heat ...

  • Zanussi ZEI6840FBV - page 9

    not proportional to the increase of the cooking zone consumption of power. It means that the cooking zone with the medium heat setting uses less than a half of its power. The data in the table is for guidance only. Heat setting Use to: Time (min) Hints 1 Keep cooked food warm. as neces- sary Put a lid on the cookware. 1 - 2 Hollandaise sauce, melt: ...

  • Zanussi ZEI6840FBV - page 10

    Troubleshooting WARNING! Refer to Safety chapters. What to do if... Problem Possible cause Remedy You cannot activate or operate the hob. The hob is not connected to an electrical supply or it is connec- ted incorrectly. Check if the hob is correctly con- nected to the electrical supply. Refer to the connection diagram. The fuse is released. Make s ...

  • Zanussi ZEI6840FBV - page 11

    Problem Possible cause Remedy The cookware is incorrect. Use the correct cookware. Refer to “Hints and tips” chapter. The diameter of the bottom of the cookware is too small for the zone. Use cookware with correct di- mensions. Refer to “Technical information” chapter. and a number come on. There is an error in the hob. Disconnect the hob f ...

  • Zanussi ZEI6840FBV - page 12

    H05BB-F Tmax 90°C. Speak to your local Service Centre. Attaching the seal 1. Clean the worktop around the cut out area. 2. Attach the supplied seal stripe to the lower edge of the hob along the outer edge of the glass ceramic. Do not extend it. Make sure that the ends of the seal stripe are located in the middle of one side of the hob. 3. Add some ...

  • Zanussi ZEI6840FBV - page 13

    R 5mm min. 55mm 560 +1 mm 490 +1 mm min. 38 mm min. 2 mm min. 12 mm min. 2 mm www.zanussi.com 13 ...

  • Zanussi ZEI6840FBV - page 14

    Protection box If you use a protection box (an additional accessory), the front airflow space of 2 mm and the protective floor directly below the hob are not necessary. The protection box accessory may not be available in some countries. Please contact your local supplier. You can not use the protection box if you install the hob above an oven. Tec ...

  • Zanussi ZEI6840FBV - page 15

    Energy efficiency Product information according to EU 66/2014 Model identification ZEI6840FBV Type of hob Built-In Hob Number of cooking zones 4 Heating technology Induction Diameter of circular cooking zones (Ø) Left front Left rear Right front Right rear 21.0 cm 14.5 cm 14.5 cm 18.0 cm Energy consumption per cooking zone (ECelectric cook- ing) L ...

  • Zanussi ZEI6840FBV - page 16

    www .zanussi.com/shop 867301887-A-262014 ...

Manufacturer Zanussi Category Stove

Documents that we receive from a manufacturer of a Zanussi ZEI6840FBV can be divided into several groups. They are, among others:
- Zanussi technical drawings
- ZEI6840FBV manuals
- Zanussi product data sheets
- information booklets
- or energy labels Zanussi ZEI6840FBV
All of them are important, but the most important information from the point of view of use of the device are in the user manual Zanussi ZEI6840FBV.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Zanussi ZEI6840FBV, service manual, brief instructions and user manuals Zanussi ZEI6840FBV. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Zanussi ZEI6840FBV.

Similar manuals

A complete manual for the device Zanussi ZEI6840FBV, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Zanussi ZEI6840FBV by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Zanussi ZEI6840FBV.

A complete Zanussi manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Zanussi ZEI6840FBV - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Zanussi ZEI6840FBV, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Zanussi ZEI6840FBV, that we can find in the current document
3. Tips how to use the basic functions of the device Zanussi ZEI6840FBV - which should help us in our first steps of using Zanussi ZEI6840FBV
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Zanussi ZEI6840FBV
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Zanussi ZEI6840FBV in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Zanussi ZEI6840FBV?

Use the form below

If you did not solve your problem by using a manual Zanussi ZEI6840FBV, ask a question using the form below. If a user had a similar problem with Zanussi ZEI6840FBV it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)