English dropdown-ico

Manual Cyclades PM IPDU

102 pages 1.41 mb
Download

Go to site of 102

Summary
  • Cyclades PM IPDU - page 1

    590-66 7 -50 1A For T echnical Support: www .avocent.com/support Avocent Corporation 4991 Corporate Drive Huntsville, Alabama 35805-6201 USA Tel: +1 256 430 4000 Fax: +1 256 430 4031 Avocent Asia Pacifi c Singapore Branch Offi ce 1 00 T ras Street, #1 5-0 1 Amara Corporate T ower Singapore 0 7902 7 Tel: +656 22 7 3 7 7 3 Fax: +656 223 9 1 55 Avoc ...

  • Cyclades PM IPDU - page 2

    FCC Warning Statement The Cyclades PM IPDU has been tested and found to comply with the limits for Class A digital devices, pursu- ant to Part 1 5 of the FCC rules. These limits are designed to provide reasonable protection against harmful in- terference when the equipment is operated in a commercial environment. This equipment generates, uses, and ...

  • Cyclades PM IPDU - page 3

    Cyclades ® PM IPDU Inst aller/Administrator/User Guide Avoce nt, the A v o cent logo , The Po w er of Being T h e r e and Cy clad es ar e regist er ed trad emarks of A vo cent Co rp oration . All oth er marks ar e the prop er ty of th ei r resp ec tive ow ne rs. © 2006 A voce nt Corp oration . All rig ht s re ser ved. 590-667-5 01A ...

  • Cyclades PM IPDU - page 4

    Instructions This sym bol is inten ded to alert th e user to th e presence o f importan t operating and maintena nce (servicing ) instructions in the litera ture accompany ing the app liance. Dangerous V olt age This sym bol is intended to alert th e user to the presence of uninsulated d angerous vo ltage within th e produc t’ s enclosur e t hat ...

  • Cyclades PM IPDU - page 5

    iii Table of Conten ts List of Figures .................. ............. .................... ................... ................... ............. .......... vii List of Tables .............. ............. ................... .................... ................... ............. ............... .. i x Chapter 1: Introduction ................ ..... ...

  • Cyclades PM IPDU - page 6

    iv Cyclades PM IPDU Installer/Administrato r/User Guide Supplied with the PM IPDU .......... ................. ................. ................. ................. ................. ............. 13 Modular input po wer cables for the P M IPDU ................... ................. ................. ................. .. 14 Optional outlet cable pac ...

  • Cyclades PM IPDU - page 7

    Table o f Contents v hwocp ........... ................. ................. ................. ........... ................. ................. ................. ........... ........ 44 id ............. ................. ................. ........... ................. ................. ................. ................ ...... ................. .. 45 ...

  • Cyclades PM IPDU - page 8

    vi Cyclades PM IPDU Installer/Administrator/User Guide ...

  • Cyclades PM IPDU - page 9

    vii List of Figures Figure 1.1: Sta ndalone Configur ation ............ ................. ................. ........... ................. ................. .... 3 Figure 1.2: Dais y Chained Configur ation ...... ................. ................. ................. ................. .............. .4 Figure 1.3: The C yclades PM IPDU with a Cyclade ...

  • Cyclades PM IPDU - page 10

    viii Cyclades PM IPDU Installer/Administrator/User Gu ide ...

  • Cyclades PM IPDU - page 11

    ix List of Tables Table 2.1: PM IPDU S hipping Box Contents, Part Numbers and Description............ ................. .. 13 Table 2.2: PM8i-1 0A IPDU and PM10i-10A IP DU Power Cables .................. ................. ............. 15 Table 2.3: PM10i-15A IPDU Power Cables ........ ..... ...... ...... ................. ........... ...... ..... ...

  • Cyclades PM IPDU - page 12

    x Cyc lades PM IPDU In staller/Administrator/User Guide Table A.19: Pino uts for IN and OUT RS-232 Seria l Ports ..................... ........... ................. ............. 72 Table C.1: C ircuit Breaker Trip Time ............ ................. ................. ................. ................. ........... .. 83 ...

  • Cyclades PM IPDU - page 13

    1 Introd uction This in stal la ti on, admi nis t rati on and us er’s g ui de prov i des back gro und inf ormation and procedures for installing, configuring an d maintaining the Cyclades ® Power Management (PM) Intelligent Power Distribution Unit (IPDU) family. This gui de offers procedures fo r a stand-al one configu ration. If you are integr ...

  • Cyclades PM IPDU - page 14

    2 Cyc lades PM IPDU In staller/Administrator/User Guide Support for daisy chaining The IPDU has a fixed number of power outlet receptacles, but with daisy chaining capabilities, users may increase capacity by co nnecting the contro l interfaces of several Cyclades PM IPDUs in a series. Creation of user account s The Cyclades PM IPDU allows on e adm ...

  • Cyclades PM IPDU - page 15

    Chap ter 1: Introduc tion 3 Figur e 1 . 1 : Standalo ne Co nf igu r a tio n NOTE: The previous gra phic displays the PM IPDU being connected t o the local work s t ati on with t he RJ-45 to DB-9F adaptor that is shipped with the product. If your work station does not hav e a DB-9M COM port, you may need to use a USB serial adap tor in order to c on ...

  • Cyclades PM IPDU - page 16

    4 Cyc lades PM IPDU In staller/Administrator/User Guide Figure 1.2: Daisy Chained Configuration NOTE: The previous gra phic displays the PM IPDU being connected t o the local work s t ati on with t he RJ-45 to DB-9F adaptor that is shipped with the product. If your work station does not hav e a DB-9M COM port, you may need to use a USB serial adap ...

  • Cyclades PM IPDU - page 17

    Chap ter 1: Introduc tion 5 itself. Visit http://www.cy clad es.com/support/downloads.php to find setup and configurat ion instruc tions for t he Cyclades managemen t products. Figure 1.3: The Cyclades PM IPDU with a Cyclad es Management Device An integrat ed environmen t offers the fo llowing advan tages: • IT pro fessional s may power d own, po ...

  • Cyclades PM IPDU - page 18

    6 Cyc lades PM IPDU In staller/Administrator/User Guide however, in the integrated configura tion, the fi rst Cyclades PM I PDU is connected to a Cyclades management dev ice instead of a work station. Accessing the System Console Users and adminis trators may access the Cy clades PM IPDU either by making a direct con sole connection to the PM IPDU? ...

  • Cyclades PM IPDU - page 19

    Chap ter 1: Introduc tion 7 Component Overview General features ar e common among all pro d ucts, in the Cyclades PM IPDU family: • 128 KB flash memory •8 K B R A M • T wo RJ-45 RS-23 2 interfaces • Digital global current disp lay wit h two digits and seven segments • LEDs monitoring ON/OFF status for each port • Audible over cu rrent a ...

  • Cyclades PM IPDU - page 20

    8 Cyc lades PM IPDU In staller/Administrator/User Guide Cyclad es PM8 i I PDU The Cyclades PM8i IPDU has the follow ing features: • One 240 V AC/8 A power inlet (IEC320-C14 ). See PM8i-10A I PDU and PM1 0i-10A IP DU power cables on p age 15 for a li st of whic h power cables ar e supplied by region . • Eight 240V AC/8A power recep tacles (IEC32 ...

  • Cyclades PM IPDU - page 21

    Chap ter 1: Introduc tion 9 Cyclad es PM1 0i I PDU The Cyclades PM10i IPDU has the f ollowing features: • One of th e followin g power plugs : • 240V AC/10A power plug (IEC320-C14) • 240V AC/16A power plug (IEC320-C20) • T en 240V AC/10A power r eceptacles (IEC320-C13) • 240V AC/10A/2 0A supplement ary protect or • Hori zontal (1U) mo u ...

  • Cyclades PM IPDU - page 22

    10 Cyclades PM IPDU Installer/Administrator/User Guide • Hori zontal (1U) mo unting Refe r to Fi gu re 1. 7 on pag e 9 an d Figu re 1.8 on pag e 9 for i mag e s of th e Cycla des PM10i- 32A IPDU. Cyclad es PM1 0i-32 Au IPDU The Cyclades PM10i-3 2Au IPDU has the following featur es: • 32A unte rminat ed inpu t power cord • T en 240V AC/10A pow ...

  • Cyclades PM IPDU - page 23

    Chapter 1: I ntroductio n 11 • V ertical moun ting (zero U) Figure 1.10: The Cyclades PM20i IPDU, PM20i-32A IPDU and PM20i-32AU IPDU Cyclad es PM 20i-32 A IPDU The Cyclades PM20i-32A IPDU has the following features: • 32A i nput power cord; IEC 30 9 plug. • T wenty 240V AC/10A power r eceptacles (IEC320-C13) • 240V AC/two 16A magnetic circu ...

  • Cyclades PM IPDU - page 24

    12 Cyclades PM IPDU Installer/Administrator/User Guide ...

  • Cyclades PM IPDU - page 25

    13 Installation Getting S t arted Collect t he following eq uipment pr ior to instal ling and configuring t he Cyclades P M IPDU in standalo ne configuration: • One or m ore RJ-45 to RJ-45 st raight-throu gh cables • An RJ -45 to DB- 9F straight -through ad aptor • A PC run ning a terminal emulation p rogram See the following section fo r th ...

  • Cyclades PM IPDU - page 26

    14 Cyclades PM IPDU Installer/Administrator/User Guide See the following section for a list of power cables shipped with specific PM IPDU mod e ls. Modular input power cables for the PM IPDU If your P M IPDU model do es not h ave a fixed powe r input cabl e, it may sh ip with one of the modular cables listed in the following sections. Depending on ...

  • Cyclades PM IPDU - page 27

    Chapter 2: In stallation 15 PM8i-10 A IPDU and P M10i-10A IPDU power ca bles T able 2.2: PM8i-10A IPDU and PM10i-10A IPDU Power Cables P/N Coun try/Regi on CAB0089 US CAB0055 Australia and New Zealand CAB0087 Continental Europe CAB0088 United Kingdom and Ireland ...

  • Cyclades PM IPDU - page 28

    16 Cyclades PM IPDU Installer/Administrator/User Guide PM10i-1 5A IPDU power cables PM10i-1 6A IPDU and PM 20i-16A IP DU power cables PM10i-2 0A IPDU and PM 20i-20A IP DU power cables Optional outlet cable p ackage The following cab le packages may be ord ered separately for the IEC PM IPDU models: • 8-outlet cables (C13 female to C14 male) (ACS0 ...

  • Cyclades PM IPDU - page 29

    Chapter 2: In stallation 17 • If you are moun ting the PM IPDU, obtain a Phillips screwdriver and app ropriate nuts and bolts before starting the following procedu re. NOTE: When mounting a Cyclades PM IPDU zero U model to a wall stud, securely mount it by using a #10 or larger screw or use a drywall fastener rated min. 25 lb. (1 1. 34 kg). The f ...

  • Cyclades PM IPDU - page 30

    18 Cyclades PM IPDU Installer/Administrator/User Guide NOTE: Install a Cyclades PM IPDU zero U m odel in a location whe re there is an adjacent and accessible wall socket outlet. T o mount the Cy clades PM8i IPD U, PM10 IPD U or PM10i IP DU: 1. Locate the approp riate sets of holes on the PM IPDU. Figure 2.2: Rack M ounting Holes on th e PM8i IPDU, ...

  • Cyclades PM IPDU - page 31

    Chapter 2: In stallation 19 NOTE: The suggested minimum screw size for wall-mounting the Cyclades PM IPDUs is #10 (4.8 mm or 0.19 in or 3/16 in) or larger . The RJ-45 c able included in the Cyclades PM IPDU package is minimum flame rat ed VW-1 or FT -1 and has a maximum length of 10 feet (3 meters). Figure 2.4: Rack M ount for the Cyclad es PM8i IP ...

  • Cyclades PM IPDU - page 32

    20 Cyclades PM IPDU Installer/Administrator/User Guide 3. T o connect another PM IPDU to the slave, connect one end of an RJ-45 cable to the OUT port of the last PM IPDU in the chain. 4. Repeat S tep 3 until you have connected the des ired number of PM IPDUs. You may cont rol up t o 128 power out lets in any combination of PM IPDU mo dels. Plugging ...

  • Cyclades PM IPDU - page 33

    Chapter 2: In stallation 21 Figure 2.5: Con necting a Local Work Station to the Cyclades PM IPDU T o access the console: Perform th e following s teps to connect a comput er to the cons ole port of the PM IPDU. This procedure as sumes that you k now how to us e a terminal emul ation program. On a PC, ensure that HyperTerminal or another terminal em ...

  • Cyclades PM IPDU - page 34

    22 Cyclades PM IPDU Installer/Administrator/User Guide T o log int o the PM IP DU through the c onsole (IN port) : From your terminal emulatio n appli catio n, log into the console por t as admin. The defaul t password is pm8. If the p assword has been chan ged from the default, u se the new p assw ord. If this is a first-time installat ion, see I ...

  • Cyclades PM IPDU - page 35

    23 Configuration The Cycl ades PM IPDU m ay be confi gured by any one of three meth ods: • Command Prompt - Full confi gur ation capabilities. • Browser - A vailable only when the PM IPDU is connected directly to an AUX port on a KVM switch or OnSite appliance or connected direc tly to a s erial console port on a n ACS console server , TS termi ...

  • Cyclades PM IPDU - page 36

    24 Cyclades PM IPDU Installer/Administrator/User Guide Initial Configur ation Using the Comm and Prom pt To confi gu re the PM IPDU, yo u mu st have a work s t ation connected to th e con so le (In ) p ort on the PM IPDU and be logged in as the admin user. See Making a Direct Connection for C onsole Access on page 20 fo r instructi ons on conn ecti ...

  • Cyclades PM IPDU - page 37

    Chapt er 3: Confi g uration 25 T o save the configu ration with t he save command: 1. Login t o the PM IPDU . 2. Enter the save command to sa ve the configurat ion. Resetting the Admin Password In the event the administr ator wants to reset the password for the Cyclades PM IPDU (for exam ple, if the administrator forgets the admin pas sword), th en ...

  • Cyclades PM IPDU - page 38

    26 Cyclades PM IPDU Installer/Administrator/User Guide 7. If yo u need to recover the p assword of many Cyclades PM IPDUs connected in a dais y chain, go to step 1 and perform the p rocedure on each Cyclades PM IPDU in the ch ain. Upgrading the Cyclades PM IPDU Firmware Starting w ith versi on 1.1 .0, t he C yclades P M IPD U fi rm ware may be u pg ...

  • Cyclades PM IPDU - page 39

    Chapt er 3: Confi g uration 27 After the upgrad e command is executed, the boot loader men u is displayed at the console, as show n belo w: 3. At the boot loader menu, select option 1 to upgrade the firmwar e. The boot load er erases the firmware currently in the unit and asks you to upload the new firmware, as shown below: 4. Use your te rmina l e ...

  • Cyclades PM IPDU - page 40

    28 Cyclades PM IPDU Installer/Administrator/User Guide Figur e 3.1: Sending F irmware using HyperT erminal 2. Cli ck the Br owse button to set the proper path for the Cyclades PM IPDU firmware file located on your work stat i on. NOTE: Y ou must browse for the proper file and click the Send button within 10 seconds of selecting T ransf er-Send . If ...

  • Cyclades PM IPDU - page 41

    Chapt er 3: Confi g uration 29 Figure 3.2: Sending Firmware using Minicom If you u se a different terminal emulator, please refer to the documentation pro vided by the manufacturer o n how to tra nsfer files using the xm odem protocol . If the file transfer is successful, the Cyclades PM IPDU console displays the login promp t. At this point, the u ...

  • Cyclades PM IPDU - page 42

    30 Cyclades PM IPDU Installer/Administrator/User Guide In this case, select o pti on 2 fr om the menu and repeat the firmware up load procedure. If the problem persists , contact Technical Support fo r assistance. ...

  • Cyclades PM IPDU - page 43

    31 Command Line Interf ace When using the Cyclades PM IPDU ind ependen tly of other C yclades products, users and administrators may access the PM IPDU command line interf ace through a terminal emulation program b y making a cons ole connection fr om a local comp uter to the IN port on the PM IPDU. See To access the cons ole: on page 21 fo r instr ...

  • Cyclades PM IPDU - page 44

    32 Cyclades PM IPDU Installer/Administrator/User Guide Logging in to the PM IPDU After the U sername: prompt , enter your u sername. NOTE: If there are dais y chained PM IPDUs, you will need to press Enter af t er the final [PM] : OUT : line appears. After the Password: prompt, enter the password for t he unsername ent ered. The defaul t user is ad ...

  • Cyclades PM IPDU - page 45

    Chapter 4: Co mmand Line In terface 33 The following command s are available only to the admin u ser. NOTE: When a range of outlets i s used in a command and the range sp ans more than one PM IPDU in a daisy chain, the range of outlets must not be s pecified by name. The range of outlets may only be spe cified by number in this situation. adduser T ...

  • Cyclades PM IPDU - page 46

    34 Cyclades PM IPDU Installer/Administrator/User Guide alarm The alarm comman d sets and reads the cur rent thre shold. This comm and is available to the admin user on ly. Syntax alarm | [<IPDU#>|<IPDU_ID>] | <thresho ld> Argument s <IPDU#> IPDU number in a d aisy chain <IPDU_ID> Identification string previously set b ...

  • Cyclades PM IPDU - page 47

    Chapter 4: Co mmand Line In terface 35 Examples To assign outlet 4, 6, 7, and 8 to u ser tess , enter the following. buzzer The buzzer com mand displays or chang es th e buzzer n otification status. When set to on , a buzzer sounds when the current exceeds th e threshold. This command is available to the admin user on ly. Syntax buzzer <on|off|s ...

  • Cyclades PM IPDU - page 48

    36 Cyclades PM IPDU Installer/Administrator/User Guide Syntax current [<IPDU#>|<IPDU_ID>]|reset Argument s <IPDU#> IPDU number in a daisy chain <IPDU_ID> Identification string previously set b y the id command reset Clears the sa ved peak current value Examples To get the current status for all units, enter the fo llowing. T ...

  • Cyclades PM IPDU - page 49

    Chapter 4: Co mmand Line In terface 37 Examples To display curren t protection status for all units, enter the following. To enable curr ent protection status for all units, enter the followin g . To disable current protection status for all units, enter the followin g. currseg The currseg com mand lets you vi ew the current for the lower o r upper ...

  • Cyclades PM IPDU - page 50

    38 Cyclades PM IPDU Installer/Administrator/User Guide To view the curren t load of segment B, enter the following. To reset the max imum recorded cu rren t for A and B, enter the following. cycle The cycle command power cy cles an outlet or g rou ps of outlets. You may use the outlet number or the outle t name (see comm and name for de tails). Syn ...

  • Cyclades PM IPDU - page 51

    Chapter 4: Co mmand Line In terface 39 To cycle multiple outlets, enter the following. dbsync The dbsync com mand synchronizes the u ser database for all PM IPDUs in the ch ain. This command is available to th e admin user only. Syntax dbsync Argument s none Examples To synch ronize the user d atabase for all PM IPDUs in the chain, enter the follow ...

  • Cyclades PM IPDU - page 52

    40 Cyclades PM IPDU Installer/Administrator/User Guide Examples To delete the user rog , enter the following. display The displ ay command allows logical inv ersion of the 2-digit, 7-s egment displ ay. The purp ose of this command is to allow a PM IPDU to be mounted upsi de-down. This command is available to the admin user only. NOTE: The decimal p ...

  • Cyclades PM IPDU - page 53

    Chapter 4: Co mmand Line In terface 41 To view the display status, enter the following. exit The exit command exits the session. Syntax exit Argument s none Examples To exit the current session, enter the follo win g. factory_de fault s The factory_defaults command resets th e unit to its factor y configuration so that all ou tlets are on, unlocked ...

  • Cyclades PM IPDU - page 54

    42 Cyclades PM IPDU Installer/Administrator/User Guide Examples To reset the factory defaults, enter the followin g . help The help comman d displays the system help m essage for all command s or for a sing le command when specified. NOTE: When the adm in user is logged in, the help command displays all commands. W hen a regular us er is logged in, ...

  • Cyclades PM IPDU - page 55

    Chapter 4: Co mmand Line In terface 43 To view the system h elp message fo r all commands, enter the following. humid ity The humidity co mmand displays the Cyclad es P M IPDU’s su rrounding h umidity and the maximum hu midity the IPDU has registered (humidity peak). It may also be used to clear the saved peak humidity value. This command only wo ...

  • Cyclades PM IPDU - page 56

    44 Cyclades PM IPDU Installer/Administrator/User Guide Argument s <IPDU#> IPDU numb er in a dais y chain <IPDU_ID> Identification string previously set b y the id command reset Resets the maximum humi dity regi stered Examples To get the humidity for all units in a dais y chain, en ter the followi ng. To get the humidity for s pecific u ...

  • Cyclades PM IPDU - page 57

    Chapter 4: Co mmand Line In terface 45 Examples To check the h ardware overcurren t status of IPDU #1, enter the following. To reset the hardware overcurrent protection, enter the followin g. id The id command sets or dis plays the ID of a PM IPDU. A maximum of 16 character s (not case sensitive) is allowed. Spac es, numbers, and sp ecial character ...

  • Cyclades PM IPDU - page 58

    46 Cyclades PM IPDU Installer/Administrator/User Guide To display the ID of PM IPDU 2, enter the following . To rename an I D to “sammy,” using an existing ID “QA,” enter the following. To display the IDs of all PM IPDUs in the daisy chain , enter the following. interval The interval command co nfigures the power up inte rval for each ou tl ...

  • Cyclades PM IPDU - page 59

    Chapter 4: Co mmand Line In terface 47 To set the interval of outlets 2, 4, 5, and 6 to a value of 2.4, enter the following. list The list command lists users created and outlets a ssigned to each user (for th e administrator), or just the outlets assign ed to the user logged in at the moment (for the regular user). Syntax list Argument s none Exam ...

  • Cyclades PM IPDU - page 60

    48 Cyclades PM IPDU Installer/Administrator/User Guide lock The lock comman d locks an outlet or g roup of outl ets in the current state. The response to this command i s a list of stat us lines, o ne per power po rt. This command works on all PM IPDUs in a daisy chain. Syntax lock all|<outlet_string> Argument s <outlet_string> Outle t ...

  • Cyclades PM IPDU - page 61

    Chapter 4: Co mmand Line In terface 49 off The off com mand turns an outlet o r group of out lets off . This command works on o utlets in a PM IPDU daisy ch ain. Syntax off all|<outlet_string> Argument s all Turns off all outlets in the PM IPDU or PM IPDU daisy chain <outlet_string> Outle t number, such as “5”, outle t name such as ...

  • Cyclades PM IPDU - page 62

    50 Cyclades PM IPDU Installer/Administrator/User Guide on The on comm and turns an outlet or a group of outlets on. If more than one o utlet is selected there will be an interval between outlets being powere d on, the in terval is defined by the interval command. Th is command works on outlets in a PM IPDU daisy chain . Syntax on all|<outlet_str ...

  • Cyclades PM IPDU - page 63

    Chapter 4: Co mmand Line In terface 51 Examples To change the password for user alpha , wh en logged in as admin, enter the following. To change th e admin password (must be logged in as admin), enter the following To change the password of a regular u ser when logged in as that u ser, enter the following. reboot The reboot co mmand reboots a PM IP ...

  • Cyclades PM IPDU - page 64

    52 Cyclades PM IPDU Installer/Administrator/User Guide Examples To reboot the first unit of the chain, or to reboot the unit in stand alone mode, enter the follo wing. To reboot the a specific IPDU in the ch ain (IP DU 2 shown), en ter the foll owing. pm> reboot saving configuration to flash on IPDU #1 .. . Done. ----------------------------- Co ...

  • Cyclades PM IPDU - page 65

    Chapter 4: Co mmand Line In terface 53 restore The restore co mmand restores the configuration currently saved in flash. This command is available to the admin u ser only. Syntax restore Argument s N/A Examples To restore th e configuration currently saved in flash, enter the fo llowing. save The save command saves the current configuration in the ...

  • Cyclades PM IPDU - page 66

    54 Cyclades PM IPDU Installer/Administrator/User Guide Examples To save the configuration to flash, enter the follo win g. An error message will be display ed if there is an error while writing the configuratio n to fl ash . st atus The status command displays th e status of selected outlets. Syntax status all|<outlet_string> Argument s <o ...

  • Cyclades PM IPDU - page 67

    Chapter 4: Co mmand Line In terface 55 To display the status of all outlets, enter the followin g . syslog The syslog command dis plays o r ch anges the syslog no tifi cation st atus. This com mand is available to the admin us er only. Syntax syslog on|off|status Argument s on Enables messag e to be displayed in the co ns ole when there is an over ...

  • Cyclades PM IPDU - page 68

    56 Cyclades PM IPDU Installer/Administrator/User Guide To turn on and off the sys log notifica tion, enter th e following as necessary. temperat ure The temperature co mmand displays the Cyclades PM IPDU’s su rrounding temperatur e and the maximum tem perature the unit has registered (tempera ture peak). It may also be used to clear the saved pea ...

  • Cyclades PM IPDU - page 69

    Chapter 4: Co mmand Line In terface 57 unassign The unass ign command rem oves the ass ignment of an outlet or group of o utlets from a given user. This command is available to th e admin user only. Syntax unassign <outlet_string> <user> Argument s <outlet_string> Outle t number, such as “5”, outle t name such as “sunfire” ...

  • Cyclades PM IPDU - page 70

    58 Cyclades PM IPDU Installer/Administrator/User Guide upgrade The upgrad e command is available only to the admi nistrator. This command goes directly to the boot o ptions menu be fore actually re booting. Yo u may either upgr ade or boot t he firmware. NOTE: For details on upgrading using the upgrade comm and or using the r eboot command, see Upg ...

  • Cyclades PM IPDU - page 71

    Chapter 4: Co mmand Line In terface 59 Examples To upgrad e 1, type: ver The ver comman d shows the current software v e rsion and hardw are model in formation of the selected PM IPDU. Syntax ver [<IPDU#>|<IPDU_ID>] -or- ver pm>upgrade 1 saving configuration to flash on IPDU #1 .. . Done. ----------------------------- Copyright (c) 2 ...

  • Cyclades PM IPDU - page 72

    60 Cyclades PM IPDU Installer/Administrator/User Guide Argument s <IPDU#> IPDU number in a daisy chain <IPDU_ID> Identification string previously set b y the id command no argument Disp lays version information f or the PM IP DU and for all P M IPDUs in a dais y chain Examples To view the curren t software version of all IPDUs in a dais ...

  • Cyclades PM IPDU - page 73

    Chapter 4: Co mmand Line In terface 61 AB|AC|BC reserved for future u se no argument displ ays the RMS volt age on all units if vo ltage sensors are av ailable Examples whoami The whoami comman d shows the usernam e of the user cu rrently logged in. Syntax whoami Argument s none Examples To view the curren t username, enter the following. pm> wh ...

  • Cyclades PM IPDU - page 74

    62 Cyclades PM IPDU Installer/Administrator/User Guide ...

  • Cyclades PM IPDU - page 75

    63 Append ices Appendix A: Speci fi cations T able A.1: PM 8-15A IPDU Specifications Characteristics Specifications Electrical Input V olt age 100-125 V AC Max Output Current T otal 15A (de-rate d to 12A) Max Output Current Each Ou tlet 15A (de-rate d to 12A) Environmental Operating T emperature 50-122 ºF (10-50 ºC) Relative Humidity 5%-95% Mecha ...

  • Cyclades PM IPDU - page 76

    64 Cyclades PM IPDU Installer/Administrator/User Guide T able A .2: PM8-20A IPDU and PM8-L20A I PDU Specifications Characteristics Specifications Electrical Input V olt age 100-125 V AC Max Output Current T otal 20A (de-rate d to 16A) Max Output Current Each Ou tlet 15A (de-rate d to 12A) Environmental Operating T emperature 50-122 ºF (10-50 ºC) ...

  • Cyclades PM IPDU - page 77

    Appe ndices 65 T able A.4: PM 10-15A IPDU Specifications Characteristics Specifications Electrical Input V olt age 100-125 V AC Max Output Current T otal 15A (de-rated to 12A ) Environmental Max Output Current Each Ou tlet 15A (de-rate d to 12A) Operating T emperature 50-122 ºF (10-50 ºC) Relative Humidity 5%-95% Mechanical Weight 8 lb. (3.64 kg) ...

  • Cyclades PM IPDU - page 78

    66 Cyclades PM IPDU Installer/Administrator/User Guide T able A .6: PM10-L 30A IPDU Specifications Characteristics Specifications Electrical Input V olt age 100-125 V AC Max Output Current T otal 30A (de-rated to 24A ) Max Output Current Each Ou tlet 15A (de-rate d to 12A) Environmental Operating T emperature 50-122 ºF (10-50 ºC) Relative Humidit ...

  • Cyclades PM IPDU - page 79

    Appe ndices 67 T able A .8: PM10i-15A IPDU Specifications Characteristics Specifications Electrical Input V olt age 100-240 V AC Max Output Current T otal 15A (de-rated to 12A ) Max Output Current Each Ou tlet 10A (de-rate d to 8A) Environmental Operating T emperature 50-122 ºF (10-50 ºC) Relative Humidity 5%-95% Mechanical Weight 8 lb. (3.64 kg) ...

  • Cyclades PM IPDU - page 80

    68 Cyclades PM IPDU Installer/Administrator/User Guide T able A .10: PM10i-20A IPDU Specifications Characteristics Specifications Electrical Input V olt age 100-240 V AC Max Output Current T otal 20A (de-rated to 16A ) Max Output Current Each Ou tlet 10A (de-rate d to 8A) Environmental Operating T emperature 50-122 ºF (10-50 ºC) Relative Humidity ...

  • Cyclades PM IPDU - page 81

    Appe ndices 69 T able A .12: PM10i-L30A I PDU Specifications Characteristics Specifications Electrical Input V olt age 100-240 V AC Max Output Current T otal 30A (de-rated to 24A ) Max Output Current Each Ou tlet 10A (de-rate d to 8A) Environmental Operating T emperature 32-122 ºF (0-50 ºC) Relative Humidity 5%-95% Mechanical Weight 12 lb. (5.45 ...

  • Cyclades PM IPDU - page 82

    70 Cyclades PM IPDU Installer/Administrator/User Guide T able A.14: PM 20-L30A IP DU Specifications Characteristics Specifications Electrical Input V olt age 100-125 V AC Max Output Current T otal 30A (de-rated to 24A ) Max Output Current Each Ou tlet 15A (de-rate d to 12A) Environmental Operating T emperature 50-122 ºF (10-50 ºC) Relative Humidi ...

  • Cyclades PM IPDU - page 83

    Appe ndices 71 T able A .16: PM20i-20A IPDU and PM20i-L 20A IPDU Electrical Specifications Characteristics Specifications Electrical Input V olt age 100-240 V AC Max Output Current T otal 20A (de-rated to 16A ) Max Output Current Each Ou tlet 10A (de-rate d to 8A) Environmental Operating T emperature 32-122 ºF (0-50 ºC) Relative Humidity 5%-95% M ...

  • Cyclades PM IPDU - page 84

    72 Cyclades PM IPDU Installer/Administrator/User Guide Interface Pinout s The following table illustrates the Cyclades PM IPDU's pinouts for the IN and OU T RS-2 32 serial ports ( RJ-45 F conn e ctors ). T able A .18: PM20i-32A IPDU and PM20i-32Au IPDU Specifications Characteristics Specifications Electrical Input V olt age 100-240 V AC Max Ou ...

  • Cyclades PM IPDU - page 85

    Appe ndices 73 Appendix B: S afety Ins tructio ns Follow the safety p recautions in this do cument when installing and o perating the Cyclades P M. See the followin g instructio ns: • Safety Instructions on page 73 • Sicher heitsanwei sungen on page 74 • Istruzi oni di S icur ezz a on pa ge 75 • Instruçõ es de Segur ança on page 76 • I ...

  • Cyclades PM IPDU - page 86

    74 Cyclades PM IPDU Installer/Administrator/User Guide Sicherheit sanweisungen Bitte lesen un d befolgen Sie diese Si cherheitsrichtlinien u m sich und Ihren C yclades PM IPDU vor Schäden zu bewahren. GEF AHR! Auch nach Öff nung einer der beiden Sicherungen k ann das Gerät noch unter S pannung über die Phasen- oder Nullleiterzufuhr stehen. GEF ...

  • Cyclades PM IPDU - page 87

    Appe ndices 75 Istruzioni di Sicurezza Vi preghiamo di attenervi alle seguenti direttive per la vostra sicurezza e un sicuro utilizzo dell' Cyclades PM IPDU. PERICOLO! T ut te le prese dell'Cyclades PM I PDU sono so tto alta tensione. Occorre prendere precauzioni. PERICOLO! Per evitare di p rendere la scossa, inse rire la spina dell' ...

  • Cyclades PM IPDU - page 88

    76 Cyclades PM IPDU Installer/Administrator/User Guide Instruções de Segurança Leia e siga as di retrizes de segurança abaixo p ara sua proteção e de seu Cyclades PM. PERIGO! Alta volt agem está presente em todas as tom adas do Cyclades PM IPDU . As devidas precauções devem ser t omadas. PERIGO! Para evitar choques elétricos, conecte o Cy ...

  • Cyclades PM IPDU - page 89

    Appe ndices 77 Instrucciones de seguridad Lea y siga es tas pautas de seguridad para protegerse a usted y a su C yclades PM. ¡PELIGRO! T odos los enchufes de salida Cyclades PM IPDU tienen alto voltaje. Se deben tomar las precauciones necesarias. ¡PELIGRO! Para ayudar a prevenir descargas eléctricas, co necte el Cyclades PM IPDU en una fuente de ...

  • Cyclades PM IPDU - page 90

    78 Cyclades PM IPDU Installer/Administrator/User Guide Instructions de sécurité s Lisez et suivez les instruction s de sécurité pour votre protection et celle ce le Cyclades PM IPDU DANGER! T outes les prises de l'Cyclades PM produisent une tension électrique élévée. Pr enez les précautions d'usage. DANGER! Pour aider à éviter ...

  • Cyclades PM IPDU - page 91

    Appe ndices 79 Appendix C: Circui t Breakers The PM IPDU circuit breakers are designed to s hut the power off to some or all of the PM IPDU outlets in case the rated current is exceeded. Th e circuit breaker m echanism for each PM IPDU model is explained the in the followin g sections. PM IPDU Unit s with One Circuit Breaker Only one circuit br eak ...

  • Cyclades PM IPDU - page 92

    80 Cyclades PM IPDU Installer/Administrator/User Guide Figure C.1: PM10-L30A IPDU Circuit Breakers PM10i-L30A IPDU The PM10i-L30A IP DU has two 15-amp ci rcuit breaker s. The first cir cuit breaker con trols outlets 6 through 10; th e second controls outlet s 1 through 5. In the event that the total current flow to outlets 6 through 1 0 exceeds 1 5 ...

  • Cyclades PM IPDU - page 93

    Appe ndices 81 will trip causing outlets 6 through 10 to shutd own. This does n ot affect outlets 1 through 5, which are controlled by the second circuit break er. As the PM10i -32A ha s the c ontro ller po were d from t h e line side of one o f th e circuit breakers, the whole unit will be inoperat ive only if both circuit breakers trip, but the c ...

  • Cyclades PM IPDU - page 94

    82 Cyclades PM IPDU Installer/Administrator/User Guide When either circuit breaker trips, o nly th e power outlets o f that segment will be affected, and half of the outlets remain operative. Figure C.4: PM20i-L30A IPDU, PM20i-32A IPDU and PM20i-32Au IPDU Circuit Breakers PM20i-32A IPDU and PM20 i-32Au IPDU The PM20i-3 2A IPDU and t he PM20i-32Au I ...

  • Cyclades PM IPDU - page 95

    Appe ndices 83 Circuit Breaker T rip Time Depending on the mo del, the Cyclades PM IPDU uses either one 1 0 amp, one 2 0 amp, two 15 amp , or two 16 am p circ uit br eak ers. Th e foll owin g ta bl e shows the circuit breaker trip time f or all PM IPDU models. T able C .1: Circuit Breaker T rip T ime Current Load T rip T ime 200% 5-30 seconds 300% ...

  • Cyclades PM IPDU - page 96

    84 Cyclades PM IPDU Installer/Administrator/User Guide ...

  • Cyclades PM IPDU - page 97

    85 Index A AC power 20 adduser 33 adduser co mmand 24 admin logging in as 22 admin password 25 alarm 34 alarms and monitorin g 1 AlterPath PM components 7 models 7 user interface 31 assign command 24 , 34 assigning outlets to us er s 24 Australia 15 , 16 B brackets, mounting 14 buzzer status comm and 35 C cables PM10i- 10A 15 chan g ing t h e def a ...

  • Cyclades PM IPDU - page 98

    86 Cycl ades PM Install er/Administrator/ User Guide deluser command 39 E electrical and hardware specifications 63 equipment required for installation 13 exit command 41 F factory_ defaults command 41 firmware upgrad e 26 flash me mory 7 H hardware conf ig urati on optio ns 2 help command 42 HyperTerminal 2 , 21 I In port 3 , 20 , 21 connection 21 ...

  • Cyclades PM IPDU - page 99

    Inde x 87 over view , PM 1 P part n umber s 13 passwd co mmand 50 pinouts , In and Out RS-232 ser ial ports 72 plug ging de vice s int o outl e ts 20 PM10 8 -15A model 65 -20A model 65 -L20A m odel 65 -L30A m odel 66 , 79 , 80 PM10i 9 , 79 -10A model 15 , 66 -15A model 16 , 67 -16A model 16 , 67 -20A model 16 , 68 -32A model 9 , 68 -32Au mod el 10 ...

  • Cyclades PM IPDU - page 100

    88 Cycl ades PM Install er/Administrator/ User Guide RJ-45 to RJ-45 7f t. CAT5 cabl e 13 S save comman d 25 , 53 save config uration 53 sequent ia l power up 1 ship pi ng bo x con t ents 13 software upgrade 26 specifications PM10-15A 65 PM10-20A 65 PM10i- 10A 66 PM10i- 15A 67 PM10i- 16A 67 PM10i- 20A 68 PM10i- 32A 68 PM10i- 32Au 68 PM10i-L3 0A 69 P ...

  • Cyclades PM IPDU - page 101

    FCC Warning Statement The Cyclades PM IPDU has been tested and found to comply with the limits for Class A digital devices, pursu- ant to Part 1 5 of the FCC rules. These limits are designed to provide reasonable protection against harmful in- terference when the equipment is operated in a commercial environment. This equipment generates, uses, and ...

  • Cyclades PM IPDU - page 102

    590-66 7 -50 1A For T echnical Support: www .avocent.com/support Avocent Corporation 4991 Corporate Drive Huntsville, Alabama 35805-6201 USA Tel: +1 256 430 4000 Fax: +1 256 430 4031 Avocent Asia Pacifi c Singapore Branch Offi ce 1 00 T ras Street, #1 5-0 1 Amara Corporate T ower Singapore 0 7902 7 Tel: +656 22 7 3 7 7 3 Fax: +656 223 9 1 55 Avoc ...

Manufacturer Cyclades Category Network Card

Documents that we receive from a manufacturer of a Cyclades PM IPDU can be divided into several groups. They are, among others:
- Cyclades technical drawings
- PM IPDU manuals
- Cyclades product data sheets
- information booklets
- or energy labels Cyclades PM IPDU
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cyclades PM IPDU.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cyclades PM IPDU, service manual, brief instructions and user manuals Cyclades PM IPDU. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cyclades PM IPDU.

Similar manuals

A complete manual for the device Cyclades PM IPDU, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cyclades PM IPDU by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cyclades PM IPDU.

A complete Cyclades manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cyclades PM IPDU - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cyclades PM IPDU, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cyclades PM IPDU, that we can find in the current document
3. Tips how to use the basic functions of the device Cyclades PM IPDU - which should help us in our first steps of using Cyclades PM IPDU
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cyclades PM IPDU
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cyclades PM IPDU in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cyclades PM IPDU?

Use the form below

If you did not solve your problem by using a manual Cyclades PM IPDU, ask a question using the form below. If a user had a similar problem with Cyclades PM IPDU it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)