English dropdown-ico

Manual Alloy POE120 Series

9 pages 1.14 mb
Download

Go to site of 9

Summary
  • Alloy POE120 Series - page 1

    POE120 Series 10/100 Base-TX to 100Base-FX Converter POE Powered Device Version 1.01 Date: 13 July 2005 ...

  • Alloy POE120 Series - page 2

    1. Overview The POE120 Series IEEE 802.3u compliant media converters support two types of media 10/100 Base-TX and 100Base-FX. With LFP (Link Fault Propagation) support it allows the adminis trator to easily diagnose link faults on their network. If the Copper or Fibre link fails, the converter forces the link status of the connecting device to als ...

  • Alloy POE120 Series - page 3

    4. Installing the Converter 4.1 POE120 converter connected to a Power Sourcing Equipment Device (PSE) 1. Connect the copper cable to your IEEE 802.3af compliant PSE device. The POE120 can also work as a standard media converter and connect to a non POE device. ( power supply is optional) 2. Connect the fibre cable to your connecting device. Note: - ...

  • Alloy POE120 Series - page 4

    Fig. 2 Example connection between PO E1 20, PSE device and Fibre Cable Fig. 3 POE120 Series to PSE Device or POE Injector PO E1 20 Series 10/ 100 Bas e- TX to 100Bas e- F X Fig. 4 POE120 Series Medi a Converter Front Panel Fig. 5 POE120 Series Media Converter Rear Panel RX TX TX RX PoE PSE or PoE Injector POE120 Series Media Converter AC 100FX Fibr ...

  • Alloy POE120 Series - page 5

    Fig. 6 Pairs used for receivin g power over Ethernet Cable. Note: The pins used for receiving power from a PSE Device follows the IEEE 802.3af standard. Endpoint: -48V via TP pins 1, 2, 3, 6 Midspan: - 48V via pins 4, 5, 7, 8 5. WDM Single Fibre Model The POE120 Series media converter has an optional Wavelength Division Multiplexing (WDM) Model tha ...

  • Alloy POE120 Series - page 6

    6. Link Failure Propagation The POE120 Series media converters su pport Link Failure Propagation (LFP). If the Copper port is unplugged, the conv erter stops transmission on the fibre port. This causes the remote fibre node link to fail as well. The LED’s on the converter will now show link failure on both the copper and fibr e ports. If the fibr ...

  • Alloy POE120 Series - page 7

    7. LED Description The following table describes the LED’s located on the POE100 Series media converter. LED Colour Function FX LNK/ACT Green Lit when fibre connection has link Blinks when fibre data is present FX FDX/COL Amber Lit when full-duplex mode is active Off when half-duplex is active Blinks when collision is present TP LNK/ACT Green Lit ...

  • Alloy POE120 Series - page 8

    9. DIP Switch Configuration Fig. 11 Reset button and S1 – Bit 1, 2, 3, 4, 5, 6, Confi guration and Settings Reset : If S1-1, S1-2, S1-3, S1-4 or S1- status is changed, please press this button for your settings to take effect. S1-1 TP Port Mode : AUTO(Default) or FORCE S1-2 TP Port Speed : 100 or 10 when TP at Force S1-3 TP Port Duplex : FDX or H ...

  • Alloy POE120 Series - page 9

    11. Technical Specifications Standards: IEEE 802.3u 10/100Base-TX, 100Base-FX IEEE 802.3af Power Over Ethernet UTP Cable: Cat. 5 cable up to 100m Fibre Cable: 50/125, 62.5/125 or 100/ 140 µm multi mode 8.3/125, 8.7/125, 9/125 or 10/125 µm single mode Power Reception Support: “Endpoint” Via TP Pins 1, 2, 3 and 6 ”Midspan” Via TP pins 4, 5, ...

Manufacturer Alloy Category TV Converter Box

Documents that we receive from a manufacturer of a Alloy POE120 Series can be divided into several groups. They are, among others:
- Alloy technical drawings
- POE120 Series manuals
- Alloy product data sheets
- information booklets
- or energy labels Alloy POE120 Series
All of them are important, but the most important information from the point of view of use of the device are in the user manual Alloy POE120 Series.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Alloy POE120 Series, service manual, brief instructions and user manuals Alloy POE120 Series. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Alloy POE120 Series.

Similar manuals

A complete manual for the device Alloy POE120 Series, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Alloy POE120 Series by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Alloy POE120 Series.

A complete Alloy manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Alloy POE120 Series - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Alloy POE120 Series, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Alloy POE120 Series, that we can find in the current document
3. Tips how to use the basic functions of the device Alloy POE120 Series - which should help us in our first steps of using Alloy POE120 Series
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Alloy POE120 Series
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Alloy POE120 Series in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Alloy POE120 Series?

Use the form below

If you did not solve your problem by using a manual Alloy POE120 Series, ask a question using the form below. If a user had a similar problem with Alloy POE120 Series it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)