English dropdown-ico

Manual Patton electronic Asynchronous

10 pages 0.47 mb
Download

Go to site of 10

Summary
  • Patton electronic Asynchronous - page 1

    USER MANUAL MODEL 1012ARC Asynchronous, T wo-Channel Short Range Modem Rack Card SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 Part #07M1012ARC-C Doc #040041UC Revised 9/10/97 CERTIFIED An ISO-9001 Certified Company Dear V alued Customer , Thank you for purchasing Patton Electronics products! W e do appreciate your business. I trust ...

  • Patton electronic Asynchronous - page 2

    1.0 W ARRANTY INFORMA TION Patton Electronics warrants all Model 1012ARC components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment. This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse or unauthoriz ...

  • Patton electronic Asynchronous - page 3

    2.0 GENERAL INFORMA TION Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warranted for One Y ear parts and labor . If any questions or problems arise during installation or use of this product, please do not hesitate to contact Patton Electronics T echnical Support at (301 ...

  • Patton electronic Asynchronous - page 4

    3.3 REAR CARD CONFIGURA TION After you have configured the Model 1012ARC, you will need to set up your rear card. The Model 1012ARC has two interface card options: the 1Q1 1 (which comes equipped with two RJ-1 1 ports and two RJ-45 ports) and the 1Q45 (which comes equipped with four RJ-45 ports). Figure 3 illustrates these two different options. Pr ...

  • Patton electronic Asynchronous - page 5

    7 JB6 & JB7: DTE as DSR or RI Because this rear card is designed to function with a variety of rack cards, it comes equipped with two strap positions. However , when used with the Model 1012ARC, this strap must be installed only in one position. Place the jumper across pins 1&2 so that the terminal (DTE) sees DSR as high when the DTE raises ...

  • Patton electronic Asynchronous - page 6

    Switching the Power Supply On and Off The power supply on/off switch is located on the front panel. When plugged in and switched on, the power LED will glow . Since the Model 1000R16 is “hot swappable”, you do not need to turn off the power before removing rack cards. The power supply may be switched off at any time without harming the installe ...

  • Patton electronic Asynchronous - page 7

    4.4.2 MUL TIPOINT TWISTED P AIR CONNECTION The Model 1012ARC supports multipoint applications using a star topology . Maximum distance between the units will vary based upon the number of drops, data rate, wire gauge, etc. Call Patton T echnical Support for specific distance estimates. Figure 6 shows how to wire the cables properly for a Model 1012 ...

  • Patton electronic Asynchronous - page 8

    5.2 POWER-UP There is no power switch on the Model 1012ARC: Power is automatically applied to the Model 1012ARC when its card-edge connector makes contact with the chassis’ mid-plane socket, or when the chassis’ power supply is turned on. The Model 1012ARC is a “hot swappable” card—it will not be damaged by plugging it in or removing it w ...

  • Patton electronic Asynchronous - page 9

    APPENDIX B CABLE RECOMMENDA TIONS The Patton Model 1012ARC operates at frequencies of 20kHz or less and has been performance tested by Patton technicians using twisted-pair cable with the following characteristics: Wire Gauge Capacitance Resistance 19 A WG 83nf/mi or 15.72 pf/ft. .0163 Ohms/ft. 22 A WG 83nf/mi or 15.72 pf/ft. .0326 Ohms/ft. 24 A WG ...

  • Patton electronic Asynchronous - page 10

    APPENDIX D INTERF ACE SETTINGS P A TTON MODULAR INTERF ACE - 8/10 Wire RJ-45 Contact Number Circuit Description 1 N/A Not Used 2 125 DSR 3 109 Received Line Signal Indicator 4 108 / 2 DTE Ready 5 102 Signal Common 6 104 Received Data 7 103 T ransmitted Data 8 106 Clear to Send 9 105 / 133 Request to Send / Ready for Receiving 10 N/A Not Used Pins 2 ...

Manufacturer Patton electronic Category Network Card

Documents that we receive from a manufacturer of a Patton electronic Asynchronous can be divided into several groups. They are, among others:
- Patton electronic technical drawings
- Asynchronous manuals
- Patton electronic product data sheets
- information booklets
- or energy labels Patton electronic Asynchronous
All of them are important, but the most important information from the point of view of use of the device are in the user manual Patton electronic Asynchronous.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Patton electronic Asynchronous, service manual, brief instructions and user manuals Patton electronic Asynchronous. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Patton electronic Asynchronous.

Similar manuals

A complete manual for the device Patton electronic Asynchronous, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Patton electronic Asynchronous by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Patton electronic Asynchronous.

A complete Patton electronic manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Patton electronic Asynchronous - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Patton electronic Asynchronous, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Patton electronic Asynchronous, that we can find in the current document
3. Tips how to use the basic functions of the device Patton electronic Asynchronous - which should help us in our first steps of using Patton electronic Asynchronous
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Patton electronic Asynchronous
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Patton electronic Asynchronous in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Patton electronic Asynchronous?

Use the form below

If you did not solve your problem by using a manual Patton electronic Asynchronous, ask a question using the form below. If a user had a similar problem with Patton electronic Asynchronous it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)