English dropdown-ico

Manual Panasonic AJ-HD1700

134 pages 1.86 mb
Download

Go to site of 134

Summary
  • Panasonic AJ-HD1700 - page 1

    Thank you for purchasing this product. Before operating this product, please read the instructions carefully and save this manual for future use. Model AJ- Operating Instructions Digital HD V ideo Cassette Recorder VQT0E88 P E ...

  • Panasonic AJ-HD1700 - page 2

    W ARNING: • TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. • TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, KEEP THIS EQUIPMENT AWAY FROM ALL LIQUIDS—USE AND STORE ONLY IN LOCATIONS WHICH ARE NOT EXPOSED TO THE RISK OF DRIPPING OR SPLASHING LIQUIDS, AND DO NOT PLACE ANY LIQUID CONTAINERS ON TOP OF T ...

  • Panasonic AJ-HD1700 - page 3

    CAUTION: This apparatus can be operated at a voltage in the range of 100 – 240 V AC. Voltage other than 120 V is not intended for U.S.A. and Canada. CAUTION: Operation at a voltage other than 120 V AC may require the use of a different AC plug. Please contact either a local or foreign Panasonic authorized service center for assistance in selectin ...

  • Panasonic AJ-HD1700 - page 4

    4 FOR U.K. ONLY This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 13 amps and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark Ï or the BSI mark Ì on t ...

  • Panasonic AJ-HD1700 - page 5

    5 Contents For your safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 General outline . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Standard accessories . . . . . . . . . . . . . . . . . . . . . . .6 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Parts and Their Functions . . . . . . . . . . ...

  • Panasonic AJ-HD1700 - page 6

    6 General outline The model AJ-HD1700 is a DVCPRO HD-LP format HD digital video cassette recorder which uses 1/4˝ wide compact cassette tapes. It can record, play back and edit 1080/59.94i (60i), 720/59.94p (60p) and 1080/50i HD signals and also play back existing DVCPRO (25 Mbps or 50 Mbps) tapes. It is also capable of converting from sources wit ...

  • Panasonic AJ-HD1700 - page 7

    7 Features Time codes This VTR comes with a built-in time code generator (TCG)/time code reader (TCR). In addition to the internal time code, an external time code can also be input and recorded as the LTC on the VTR. Multi-functional interfaces • Serial digital input/output connector The VTR comes with an HD component serial interface input/outp ...

  • Panasonic AJ-HD1700 - page 8

    8 Front panel 1 POWER switch 2 Audio level meter The audio information is displayed here. • The levels of the CH1, CH2, CH3, CH4, CH5, CH6, CH7 and CH8 PCM audio signals and level of the CUE track signal are displayed here. • The levels of the input signals are displayed during recording and when E-E is selected. During playback, the levels of ...

  • Panasonic AJ-HD1700 - page 9

    9 POWER OFF ON HEADPHONES PUSH LOCK FULL CH CONDITION MONITOR FULL/FINE REMOTE LR 9P 50P RS-232C CH 12 3 4 5 6 7 8 CUE XL/L/M - cassette Do not insert S-cassette without adapter EJECT AUDIO CH SELECT SHIFT ABC DEF GHI JKL MNO PQRS PREVIEW/ REVIEW PRE- ROLL A IN A OUT HOME RF1 ASSEM ADJUST SHTL REV FWD VAR JOG STAND BY RECORDER INPUT CHECK PLAYER SE ...

  • Panasonic AJ-HD1700 - page 10

    10 Front panel > Time code display The data, VTR status information, tape format information or warning information which corresponds to the direct menu buttons @ appear on this display. (See page 16 for details of the displays.) ? UNITY lamps VIDEO UNITY lamp This lights if the UNITY level applies for all the HD or SD output levels. AUDIO UNITY ...

  • Panasonic AJ-HD1700 - page 11

    11 Front panel D SHTL button For shuttle playback, press this button and proceed with the operation using the search dial G . When the dial is turned to the desired position, the tape is played at the speed corresponding to the angle to which the dial has been turned. A still picture appears when the dial is set to the center position. E JOG button ...

  • Panasonic AJ-HD1700 - page 12

    12 N PREROLL button This button is used to locate where a transmission or manual editing starts on the tape. When it is pressed, the tape travels to the preroll point and it stops there. When the cue time has been registered on the HOME, PF1 or PF2 screen: The tape is prerolled from the registered cue time using the preroll time which was set using ...

  • Panasonic AJ-HD1700 - page 13

    13 Front panel P TRIM buttons These buttons are used to make fine adjustments to the IN or OUT point. By pressing the i or j button while the IN button or OUT button is held down, the registered edit point can be adjusted in 1-frame increments. When the i button is pressed, the point is moved ahead by one frame; conversely, when the j button is pre ...

  • Panasonic AJ-HD1700 - page 14

    14 Front panel Y STANDBY button The same tape tension is applied as in the regular stop mode. While the head drum is rotating, the button’s lamp lights to indicate that the standby ON mode is now established. If the button is pressed in the stop mode, the standby OFF mode is established followed by the half loading mode. At this time, its lamp go ...

  • Panasonic AJ-HD1700 - page 15

    15 Front panel INPUT CHECK output specifications VIDEO (59/60 Hz mode) Parts and Their Functions AUDIO Output system MONITOR L HD SDI (MONITOR) (embedded audio) SD SDI (MONITOR) (embedded audio) MONITOR (L, R) selection CH1 to CH8 Audio input which has been set by the channels selected as L channels* 2 Same as main system* 1 Same as main system* 1 ...

  • Panasonic AJ-HD1700 - page 16

    16 1 Cue time display The currently registered cue time appears here. (For details of the cue time operations, refer to “Cue time registration, preroll and cue-up” on page 112.) Cue time operations can be performed on the HOME, PF1 and PF2 screens only. 2 Operation mode (speed) display The current operation mode (including the speed display) ap ...

  • Panasonic AJ-HD1700 - page 17

    17 3 Time counter display CTL: CTL counter data TCG: Time code data of time code generator UBG: User’s bit data of time code generator tcg: When the time code data of the time code generator is preset ubg: When the user’s bit data of the time code generator is preset TCR/T ¢ R: Time code data of the time code reader UBR/U ¢ R: User’s bit da ...

  • Panasonic AJ-HD1700 - page 18

    18 Rear panel 1 AC IN socket Using the power cord supplied, connect one end to this socket and the other end to the power outlet. 2 SIGNAL GND terminal This is connected to the signal ground terminal on the component connected to this VTR in order to minimize noise. It is not a safety ground. 3 Fuse holder A fuse is inserted here. 4 Fan The fan is ...

  • Panasonic AJ-HD1700 - page 19

    19 Rear panel > SD SERIAL DIGITAL COMPONENT AUDIO and VIDEO OUT connectors The digital component audio and video signals complying with the SMPTE 259M-C, 272M-A or 294M standard are output from these connectors. They are output during DVCPRO25M, 50M, DV or DVCAM interchangeable playback or when signals are down-converted and output. Signals cont ...

  • Panasonic AJ-HD1700 - page 20

    20 PUSH PUSH PUSH PUSH SIGN AC IN TC IN IN L OUT CH 1 AUDIO IN CH 2 CH 3 CH 4 VIDEO OUT (WFM) ON OFF 75 ≠ ON OFF 75 ≠ (SUPER) 1 2 3 SD REF IN CH1·2 AUDIO OUT CH3·4 CH5·6 CH7·8 HD REF IN HD REF OUT SD REF OUT RS-232C ENCODER REMOTE REMOTE IN/OUT REMOTE OUT PARALLEL CH 1 CH 2 CH 3 CH 4 OUT R CUE MON PUSH L GD CH1·2 AUDIO IN CH3·4 CH5·6 CH7 ...

  • Panasonic AJ-HD1700 - page 21

    21 Note concerning tapes played back by this VTR • Use tapes which have been shot by a variable frame rate camera. • Do not use tapes which are copies of shot tapes or edited tapes. Doing so will cause the tape management information to be lost, and normal conversion and playback may not be possible as a result. • To convert a tape, which was ...

  • Panasonic AJ-HD1700 - page 22

    22 Example of connections with an editing controller Connections POWER OFF ON HEADPHONES PUSH LOCK FULL CH CONDITION MONITOR FULL/FINE REMOTE LR 9P 50P RS-232C CH 12 3 4 5 6 7 8 CUE XL/L/M - cassette Do not insert S-cassette without adapter EJECT AUDIO CH SELECT SHIFT ABC DEF GHI JKL MNO PQRS PREVIEW/ REVIEW PRE- ROLL A IN A OUT HOME RF1 ASSEM ADJU ...

  • Panasonic AJ-HD1700 - page 23

    23 POWER OFF ON HEADPHONES PUSH LOCK FULL CH CONDITION MONITOR FULL/FINE REMOTE LR 9P 50P RS-232C CH 12 3 4 5 6 7 8 CUE XL/L/M - cassette Do not insert S-cassette without adapter EJECT AUDIO CH SELECT SHIFT ABC DEF GHI JKL MNO PQRS PREVIEW/ REVIEW PRE- ROLL A IN A OUT HOME RF1 ASSEM ADJUST SHTL REV FWD VAR JOG STAND BY RECORDER INPUT CHECK PLAYER S ...

  • Panasonic AJ-HD1700 - page 24

    24 Before starting to operate the VTR, check whether the equipment has been connected properly. T urning on the power and inserting the cassette 1 Turn on the VTR’s power. 3 Insert the cassette tape. Without forcing it, insert the cassette tape at the prescribed position. 4 Check that the STOP lamp is lighted. When the tape is inserted, the cylin ...

  • Panasonic AJ-HD1700 - page 25

    25 Recording 1 Set the accidental erasure prevention tab on the cassette tape to the “recording” position, and insert the tape. 3 Select “EE” as the OUTPUT setting using on the <HOME> menu. E-E pictures now appear on the TV monitor. F1 4 Check that the REC INHIBIT lamp is off. If the lamp is lighted, select “OFF” as the R INH sett ...

  • Panasonic AJ-HD1700 - page 26

    26 Playback 1 Insert the cassette tape, and set the VTR to the STOP mode. 3 Adjust the audio playback levels. Before adjusting the playback levels, check that the PB LED is lighted and that the audio adjustment dial is in the unlocked status. If the dial is locked (indicated by the lighted LOCK LED), press it. The LOCK LED goes off, and the lock is ...

  • Panasonic AJ-HD1700 - page 27

    27 Jog mode Jog/Shuttle 1 Press the JOG button. Shuttle mode 1 Press the SHTL button. 3 To transfer the VTR from the jog mode to another mode, press the button that corresponds to the mode concerned. 2 Turn the search dial. The dial’s click-stops are released, and the tape is played back at the speed corresponding to the speed at which the dial i ...

  • Panasonic AJ-HD1700 - page 28

    28 Manual Editing 1 Select the editing mode. ASSEM button: Assemble (frame-to-frame continuity) editing is performed using this button. INSERT button: Insert editing is performed using this button. 2 On the time code display, select the channels to be edited. ASSEM: Set ASSEM to ON using the button. INSERT: To select V, A1, A2, A3, A4 and CUE chann ...

  • Panasonic AJ-HD1700 - page 29

    29 POWER OFF ON HEADPHONES PUSH LOCK FULL CH CONDITION MONITOR FULL/FINE REMOTE LR 9P 50P RS-232C CH 12 3 4 5 6 7 8 CUE XL/L/M - cassette Do not insert S-cassette without adapter EJECT AUDIO CH SELECT SHIFT ABC DEF GHI JKL MNO PQRS PREVIEW/ REVIEW PRE- ROLL A IN A OUT HOME RF1 ASSEM ADJUST SHTL REV FWD VAR JOG STAND BY RECORDER INPUT CHECK PLAYER S ...

  • Panasonic AJ-HD1700 - page 30

    30 Automatic Editing (deck-to-deck) 1 Select the editing mode. ASSEM button: Assemble (frame-to-frame continuity) editing is performed in this mode. INSERT button: Insert editing is performed in this mode. 2 On the time code display, select the channels to be edited. ASSEM: Set ASSEM to ON using the button. INSERT: To select V, A1, A2, A3, A4 and C ...

  • Panasonic AJ-HD1700 - page 31

    31 1 Re-registering an edit point Locate the new edit point by performing the jog or shuttle operation, and press the IN (or OUT) button and SET button at the same time to re-register the edit point. 2 Modifying an edit point in 1-frame increments (trimming function) Press the TRIM button while holding down the IN (or OUT) button. Each time the i b ...

  • Panasonic AJ-HD1700 - page 32

    32 Automatic Editing (deck-to-deck) Previewing 1 After the edit points have been registered, press the PREVIEW button. Regular preview is now conducted. <Notes> • If the edit IN point has not been registered, the position where the PREVIEW button was pressed is registered as the edit IN point. • To stop the preview at any time, press the ...

  • Panasonic AJ-HD1700 - page 33

    33 1 Upon completion of the editing, press the REVIEW button. Review is now started by the recorder. • To stop the review at any time, press the STOP button. • When the edit OUT point is reached, the tape is postrolled, after which it stops. Reviewing Automatic Editing (deck-to-deck) POWER OFF ON HEADPHONES PUSH LOCK FULL CH CONDITION MONITOR F ...

  • Panasonic AJ-HD1700 - page 34

    34 ∫ Modifying the edit points Video IN point: While holding down the IN button, press the TRIM i button or TRIM j button. Video OUT point: While holding down the OUT button, press the TRIM i button or TRIM j button. Audio IN point: While holding down the A-IN button, press the TRIM i button or TRIM j button. Audio OUT point: While holding down t ...

  • Panasonic AJ-HD1700 - page 35

    35 Audio Split Editing ∫ Duration display The duration can be indicated on the display. Between the video IN and OUT points: Press the IN button and OUT button at the same time. Between the audio IN and OUT points: Press the A-IN button and A-OUT button at the same time. Match frame processing function When two VTRs are used to perform the audio ...

  • Panasonic AJ-HD1700 - page 36

    36 V ariable memory function 1 Register the IN point using the SET button and IN button. There is no need to set the OUT point for variable memory playback. V ariable memory playback operation procedure The variable memory mode can be selected by setting (VARMEM) on the <HOME SHIFT> menu to “ON.” When (VARMEM) is set to “OFF,” the var ...

  • Panasonic AJ-HD1700 - page 37

    37 1 Select the editing mode on the <ASSEMBLE> or <INSERT> menu. 2 Select the VTR to be operated by pressing the RECORDER or PLAYER button. 3 Register the IN and OUT points using the SET button and IN and OUT buttons. The player’s OUT point cannot be registered. 4 Press the PLAYER button to select the player VTR, and then set the init ...

  • Panasonic AJ-HD1700 - page 38

    38 Function menus The function menus are used to set the functions which are frequently used. The function menus are selected directly using the direct menu buttons on the front panel. General description General menus <HOME>, <HOME SHIFT> The most basic settings for recording, playback and TC operations are set on these menu screens. & ...

  • Panasonic AJ-HD1700 - page 39

    39 Function menus Allocating the function keys F1 F2 F3 F4 F5 F6 Menu (6 types) Menu hierarchy Items allocated to function keys HOME 1st OUTPUT TC/CTL TC CLR R INH 2nd (SHIFT) PREROL OUTREF CAPSTN VARMEM VIDEO 1st VID IN INT SG WFM UP CON DW CON 2nd (SHIFT) 3rd (F+SHIFT) V LV C LV HUE SUP LV BR CT R-BR B-BR R-CT B-CT AUDIO 1st A1 IN A2 IN DIN 12 A3 ...

  • Panasonic AJ-HD1700 - page 40

    40 Function menus Toggle: Each time a function button is pressed, the setting is changed or entered. F i toggle*: When a function button is pressed while the F button is held down, the setting can be changed or entered each time. Toggle i ADJ: When a function button is pressed, the setting is highlighted, and the status in which the setting can be ...

  • Panasonic AJ-HD1700 - page 41

    41 Function menus <HOME> F1 SHIFT F2 F3 F4 F5 F6 Status display 1 Status display 2 Warning mark Name of menu displayed Remaining tape/total tape Time counter Cue time Back menu indicator Variable memory mode indicator Operation mode/speed F1 SHIFT F2 F3 F4 F5 F6 The most basic settings for recording, playback and TC operations are set on this ...

  • Panasonic AJ-HD1700 - page 42

    42 VTR Description of settings Status display 1 (continued) REF Output reference This displays the output reference status. HD25 HD50 The HD REF input signal has been selected as the reference. The frame frequency is 25 Hz. HD23 The HD REF input signal has been selected as the reference. The frame frequency is 23.98 Hz. The HD REF input signal has ...

  • Panasonic AJ-HD1700 - page 43

    43 Function menus <HOME> Playback reference signal (OutRef) specifications for tape playback Input signal provided (“Yes”)/not provided (“No”) HD_REF_IN Yes No SD_REF_IN Yes No Yes No INPUT Yes No Yes No Yes No Yes No AUTO EXT_HD_REF EXT_SD_REF INPUT HD_REF_IN HD_REF_IN SD_REF_IN INPUT HD_REF_IN HD_REF_IN SD_REF_IN Internal HD HD_REF_ ...

  • Panasonic AJ-HD1700 - page 44

    44 Function menus <HOME> Operation mode (speed) display This indicates the current operation mode (including the speed display). Display EJECT Operation mode Eject mode STANDBY OFF Standby OFF mode T.RELEASE Tension release mode STOP Stop mode PREROLL Preroll mode PLAY Playback mode PLAY i Special playback (playback phase adjustment) mode (FW ...

  • Panasonic AJ-HD1700 - page 45

    45 <HOME> Registering TCG values 1. 2. 3. Selecting the values Press the TC/CTL button to select TC. Press the button. The selected item (cue time or TC) is now highlighted. Turn the ADJUST dial to select TC. Again press the button. A single digit is highlighted, and the mode for inputting numerical values is established. <Notes> • Th ...

  • Panasonic AJ-HD1700 - page 46

    46 Function menus <HOME> Function button/item Switching method Corresponding setup menu item F1 OUTPUT Toggle No. 140 OUTPUT Description of setting For selecting the output signals. <In the STOP mode> TAPE: In the STOP mode, the signals played back from the tape are output. During recording or editing (*), simultaneous playback signals ...

  • Panasonic AJ-HD1700 - page 47

    47 Function menus <VIDEO> 1 . Video signal input switching, internal signal source type changing, and up-converter aspect ratio conversion Function button/item Switching method Corresponding setup menu item F1 VID IN Toggle No. 600 VIDEO IN SEL Description of setting Refer to the setup menu. The SD SDI and SDTI settings will not appear if the ...

  • Panasonic AJ-HD1700 - page 48

    48 Function menus <VIDEO> *The underlining (__) denotes the factory setting mode. Function button/item Switching method Corresponding setup menu item Description of setting Setting F3 (SHIFT) Y HD Toggle i ADJ No. 653 Y LVL(HD) Refer to the setup menu. To return to the UNITY (100.0%) level, use F i Press. 0.0% --- 100.0% --- 141.3% F4 (SHIFT) ...

  • Panasonic AJ-HD1700 - page 49

    49 Function menus <AUDIO> *The underlining (__) denotes the factory setting mode. F1 SHIFT F2 F3 F4 F5 F6 F1 SHIFT F2 F3 F4 F5 F6 F1 SHIFT F2 F3 F4 F5 F6 The basic input/output settings for the audio signals are set on these menu screens. 1. Audio signal input selection (CH1jCH4) 2. Audio signal input selection (CH5-CH8) 3. Audio volume contr ...

  • Panasonic AJ-HD1700 - page 50

    50 Function menus <AUDIO> Function button/item Switching method Corresponding setup menu item Description of setting Setting F3 (SHIFT2) RECCUE Toggle No. 733 REC CUE Refer to the setup menu. CUE CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH1 i 2 CH3 i 4 CH5 i 6 CH7 i 8 CH1 j 8 F1 (SHIFT2) VOLUME Toggle No. 141 VOLUME Refer to the setup menu. For switch ...

  • Panasonic AJ-HD1700 - page 51

    d 12h 24h 51 Function menus <TC> The TC-related settings are performed on these menu screens.Whether the TC is to be superimposed onto the display can also be set on this screen. Function button/item Switching method Corresponding setup menu item F1 TC SRC Toggle No. 507 TC SOURCE Description of setting Refer to the setup menu. Setting When H ...

  • Panasonic AJ-HD1700 - page 52

    52 Function menus <CUE> Moving to registered points The highlighting on the registered point display area is moved by turning the ADJUST dial. It is moved in the ascending order of points when the dial is turned clockwise and in the descending order of points when it is turned counterclockwise. W hen “AUTO” has been selected as the (PAGE) ...

  • Panasonic AJ-HD1700 - page 53

    53 Search mode The desired search point can be selected, and the tape can be prerolled to that point. When the display page has been changed using the [ (PREV) or (NEXT) button on the <CUE> menu, the following applies depending on the setting for (PAGE) on the <CUE SHIFT> menu. When “MANU” is set: Both the search and registered poin ...

  • Panasonic AJ-HD1700 - page 54

    54 Function menus <CUE> *The underlining (__) denotes the factory setting mode. Function button/item Switching method Corresponding setup menu item F1 PREV Press ___ Description of setting For multi-cue page forward scrolling. Setting ___ F2 NEXT Press ___ For multi-cue page reverse scrolling. ___ F4 CLR Press ___ For clearing the currently s ...

  • Panasonic AJ-HD1700 - page 55

    55 Function menus <DIAG> W arning display When a warning occurs in this VTR, the warning mark (W) blinks at the top left of the screen. If (WARN) is now pressed, the details of the warning can be checked out on the LCD monitor. When more than one warning has occurred, turn the ADJ dial to scroll through the messages. Hour-meter display When ( ...

  • Panasonic AJ-HD1700 - page 56

    56 Function menus Function button/item Switching method Corresponding setup menu item F1 WARN ___ ___ Description of setting For displaying the warning messages on the LCD monitor. Setting ___ F2 HOURS ___ ___ For displaying the hour-meter on the LCD monitor. ___ F1 (SHIFT) STEP Toggle No. 015 AUTO STEP Refer to the setup menu. OFF ON F2 (SHIFT) CA ...

  • Panasonic AJ-HD1700 - page 57

    57 Function menus <MENU> *The underlining (__) denotes the factory setting mode. These enable movement to the menu screens for operations (adjustments, saving data onto or loading it from the internal memory or IC cards) relating to the SYSTEM and SETUP menus. Function button/item Switching method Corresponding setup menu item F1 FILE F i Pre ...

  • Panasonic AJ-HD1700 - page 58

    58 Function menus <ASSEMBLE> Function button/item Switching method Corresponding setup menu item F1 ASSEM Toggle ___ Description of setting For setting the editing mode to ON or OFF. When the display is highlighted, the ASSEMBLE editing mode is set to ON, and the ASSEM button lights. Setting OFF ON F2 ___ ___ ___ ___ ___ F3 ___ ___ ___ ___ __ ...

  • Panasonic AJ-HD1700 - page 59

    59 Function menus <INSERT> Registering the edit points After the edit IN and OUT points have been registered, the and buttons light. Automatic editing and manual editing • When the editing mode has been selected (the button is lighted), automatic editing or manual editing can be performed even after the INSERT screen has been exited. • Af ...

  • Panasonic AJ-HD1700 - page 60

    60 Function menus <SETUP MENU/SYSTEM MENU> Selecting the menu items Select the menu item by turning the ADJ dial. (The cursor is moved down when the dial is turned clockwise and up when it is turned counter- clockwise.) • Forward or reverse page scrolling (SETUP menu only) The menu list is organized by category, and the pages can be scrolle ...

  • Panasonic AJ-HD1700 - page 61

    61 Function menus <SETUP MENU/SYSTEM MENU> Flow of setting changes Select the menu item Open the screen. Close the screen. F6 (EXIT) Submenu Press the ADJ dial. Press the ADJ dial. Turn the ADJ dial. F i F4 (item reset) Turn the ADJ dial. F i F4 (item reset), F i F5 (SET) Turn the ADJ dial. F i F4 (item reset) Press SHIFT. Change the setting ...

  • Panasonic AJ-HD1700 - page 62

    62 Function menus <FILE> F1 SHIFT F2 F3 F4 F5 F6 Memory name Memory selection cursor File title (VTR) Warning message File title (VTR) File number (VTR) File number (VTR) File status (VTR) • This VTR comes with VTR MEMORY for storing the current settings (*) and VTR MEMORY to for storing these settings as a backup. • Each VTR MEMORY can b ...

  • Panasonic AJ-HD1700 - page 63

    63 Function menus <FILE> File overwrite inhibit facility It is possible to lock the overwrite inhibit facility for individual files in VTR MEMORY to . Select the file to be locked, and press (LOCK) to lock it. If (LOCK) is pressed again, the facility is unlocked. The locked or unlocked mode is displayed in the file status. [ ≤ : Unlocked st ...

  • Panasonic AJ-HD1700 - page 64

    64 Function menus <PF1/PF2> F1 SHIFT F2 F3 F4 F5 F6 Menu name Selection marker Registered menu number Item selection cursor Item number Item number Category Setting number Item name Press (RESET) while holding down the button. All the registered menu number and name displays will now go blank. All the contents of the PF registration file are ...

  • Panasonic AJ-HD1700 - page 65

    65 Function menus PF1/PF2 function buttons Function button/item Switching method Corresponding setup menu item F1 : PREV Press ___ Description of setting For scrolling the on-screen menu pages in the forward direction. Setting ___ F2 ; NEXT Press ___ For scrolling the on-screen menu pages in the reverse direction. ___ F4 RESET Press F i Press ___ F ...

  • Panasonic AJ-HD1700 - page 66

    66 Function menus PF1/PF2 function button names When SETUP menu items have been registered in the function buttons, the names of these function buttons are displayed as set forth in the table below. Setup menu item No. Name of setup menu item Function button name 000 P-ROLL TIME PREROL 001 LOCAL ENA L ENA 002 TAPE TIMER TIMER 003 REMAIN SEL REMAIN ...

  • Panasonic AJ-HD1700 - page 67

    67 Function menus Setup menu item No. Name of setup menu item Function button name 500 VITC BLANK VI BLK 501 VITC POS-1 VI PS1 502 VITC POS-2 VI PS2 503 TCG MODE TCG MD 504 RUN MODE RUN MD 505 TCG REGEN TCG RG 506 REGEN MODE REG MD 507 TC SOURCE TC SRC 508 BINARY GP BINARY 509 PHASE CORR P CORR 510 TCG CF FLAG TG CFF 511 DF MODE DF MOD 512 TC OUT R ...

  • Panasonic AJ-HD1700 - page 68

    68 Function menus Setup menu item No. Name of setup menu item Function button name 713 CH1 IN SEL A1 IN 714 CH2 IN SEL A2 IN 715 CH3 IN SEL A3 IN 716 CH4 IN SEL A4 IN 717 CH5 IN SEL A5 IN 718 CH6 IN SEL A6 IN 719 CH7 IN SEL A7 IN 720 CH8 IN SEL A8 IN 721 D IN SEL12 DIN 12 722 D IN SEL34 DIN 34 723 D IN SEL56 DIN 56 724 D IN SEL78 DIN 78 725 REC CH1 ...

  • Panasonic AJ-HD1700 - page 69

    69 <CARD> F1 SHIFT F2 F3 F4 F5 F6 Memory name Memory selection cursor Warning message 1 F1 SHIFT F2 F3 F4 F5 F6 Warning message 2 File status (VTR) File number (VTR) File number (CARD) File title (CARD) File title (VTR) File status (CARD) F1 SHIFT F2 F3 F4 F5 F6 F1 SHIFT F2 F3 F4 F5 F6 SYSTEM MENU/SETUP MENU/50PIN ASSIGN File status [MENU/ERR ...

  • Panasonic AJ-HD1700 - page 70

    70 IC card data layout VTR memory data layout Current MULTI CUE MULTI CUE Lock ≤ <> Lock k 1 2 3 4 5 6 7 Current ERROR LOG ERROR LOG ≤ <> k 1 2 3 4 5 6 7 8 8 • The SETUP MENU (current, USER1 to USER4) and SYSTEM MENU settings, 50PIN ASSIGN registration data, MULTI CUE registered points and ERROR LOG data in the VTR MEMORY in this ...

  • Panasonic AJ-HD1700 - page 71

    71 Function menus Function button/item Switching method Corresponding setup menu item F1 FORMAT F i Press ___ Description of setting For formatting the IC card. Setting ___ F2 SAVE < Press ___ For transferring data to the IC card files. ___ F4 DELETE F i Press ___ For deleting IC card files. ___ F5 LOCK Press ___ For locking IC card files or VTR ...

  • Panasonic AJ-HD1700 - page 72

    72 Function menus F1 SHIFT F2 F3 F4 F5 F6 Registered item name Registered value Selection marker <50P IN/OUT ASSIGN> Pins in which functions can be registered IN pins: Pins 6 to 20, 22, 23, 25 OUT pins: Pin 21, 24, pins 32 to 46, 48 All other pins are reserved and cannot be changed. Using the front panel controls and on-screen menus, function ...

  • Panasonic AJ-HD1700 - page 73

    73 Function menus <50P IN/OUT ASSIGN> Press (RESET) while holding down the button. All the registered item names and registered values are now set to the factory settings. (These settings cannot be restored.) F F4 Registering functions in the input pins/Active inputs Registering functions in the output pins/Active outputs Clearing Resetting a ...

  • Panasonic AJ-HD1700 - page 74

    74 Function menus Special IN menu list (continued) Special OUT menu list No. SUPER DISPLAY Description of setting B22 UD FIT_V For switching the picture angle during down-conversion to letter box and the picture angle during up-conversion to the top/bottom cut status in the vertical direction. B23 UD FIT_H For switching the picture angle during dow ...

  • Panasonic AJ-HD1700 - page 75

    75 C22 ERR0 C23 ERR1 C24 ERR2 Error status 000 SERVO NOT LOCKED (priority level 1) 001 SERVO LOCKED (priority level 4) 010 HIGH ERROR (amber) (priority level 3) 011 HIGH ERROR (red) (priority level 2) Error statuses C12 TC SRC1 C13 TC SRC2 TC input status 00 External SLTC 01 External LTC 10 External SVITC (or external VITC with SD input) 11 INT TC ...

  • Panasonic AJ-HD1700 - page 76

    76 Function menus <50P IN/OUT ASSIGN> 50P IN/OUT ASSIGN function buttons Function button/item Switching method Corresponding setup menu item F1 : PREV Press ___ Description of setting For scrolling the on-screen menu pages in the forward direction. Setting ___ F2 ; NEXT Press ___ For scrolling the on-screen menu pages in the reverse direction ...

  • Panasonic AJ-HD1700 - page 77

    77 Function menus <50P IN/OUT ASSIGN> 50-pin assignment factory settings Pin no. I/O Setting item 1I REC 2I PLAY 3I FF 4I REW 5I STOP 6I ___ 7I ___ 8I 422 REMOTE ON 9I 422 REMOTE OFF 10 I LOCAL ENABLE 11 I EJECT 12 I IN SET 13 I REC INH ALL 14 I REC INH PRE 15 I LOCAL DISABLE 16 I TC EXT 17 I TC INT&TCG MODE AUTO 18 I ___ 19 I ___ 20 I ST ...

  • Panasonic AJ-HD1700 - page 78

    LOCAL HD HD AJ-HD1700 External encoder remote controller SD BOTH SD BOTH BOTH HD External encoder remote controller/AJ-HD1700 SD BOTH Setting Adjustment item 05: ENCODER SEL 06: V LEVEL CTRL 662: V LEVEL 663: C LEVEL 664: HUE ( or C PHASE) 665: SETUP LVL (or BK LVL) REMOTE 78 System menus No./Item Description of setting The underlining (__) denotes ...

  • Panasonic AJ-HD1700 - page 79

    00 COARSE For adjusting the VIDEO OUT system phase in 1H steps. j : To advance the phase. i : To delay the phase. 0000 j 5H :: 0005 0H :: 0010 5H <Note> This setting remains unchanged even when the factory setting operation is performed. No./Item Description of setting 12 SYS H (HD)* UP For adjusting the system phase of the HD SDI output. Whe ...

  • Panasonic AJ-HD1700 - page 80

    59/60 Hz mode: Status in which “0” (59/60) has been selected 50 Hz mode: Status in which “1” (50) has been selected 23/24 Hz mode: Status in which “2” (23/24) has been selected 25 Hz (HD) mode: Status in which “3” (25 (HD)) has been selected 25 Hz (SD) mode: Status in which “4” (25(SD)) has been selected 80 System menus *System ...

  • Panasonic AJ-HD1700 - page 81

    81 Setup menus The underlining (__) denotes the factory setting mode. <BASIC> No./Item Description of setting 000 P-ROLL TIME For setting the preroll time. Any time from 0 to 30 seconds can be set in 1- second increments. 0000 0s :: 0005 5s :: 0030 30s <Notes> • During automatic editing (PREVIEW or AUTO EDIT), no operations are perfor ...

  • Panasonic AJ-HD1700 - page 82

    82 Setup menus The underlining (__) denotes the factory setting mode. <BASIC> (continued) No./Item Description of setting No./Item Description of setting 008 CHARA V-POS For setting the vertical positions of the characters for the time code and other superimposed displays of the HD SDI MONITOR, SD SDI MONITOR and VIDEO OUT3 connectors. 0000 0 ...

  • Panasonic AJ-HD1700 - page 83

    83 The underlining (__) denotes the factory setting mode. Setup menus <BASIC> (continued) Formats in which the tape is played back No./Item Description of setting 031* 4 OUT REF Video output reference 0000 AUTO : When the HD REF input signal is supplied, it is used as the reference. If it is not supplied but the SD REF input signal is supplie ...

  • Panasonic AJ-HD1700 - page 84

    84 Setup menus The underlining (__) denotes the factory setting mode. <OPERA TION> No./Item Description of setting 100 SEARCH ENA For selecting the direct search dial operation. 0000 DIAL : Direct search dial operations are performed. 0001 KEY : Operation does not transfer to the search mode unless the SHTL, JOG or VAR button is pressed. 101 ...

  • Panasonic AJ-HD1700 - page 85

    85 Setup menus The underlining (__) denotes the factory setting mode. <OPERA TION> (continued) 113* 1 REC INH For selecting whether to allow or inhibit recording on the cassette tape. 0000 OFF : Recording on the cassette tape is enabled when the cassette’s accidental erasure prevention mechanism has been set to the recording enable position ...

  • Panasonic AJ-HD1700 - page 86

    86 Setup menus The underlining (__) denotes the factory setting mode. <OPERA TION> (continued) No./Item Description of setting 118* 1 SP MODE INH For selecting whether to allow or inhibit recording on a tape which has been written by a format other than DVCPRO HD-LP. 0000 OFF : Recording on the cassette tape is allowed. 0001 ON : Recording on ...

  • Panasonic AJ-HD1700 - page 87

    204 RS232C SEL For selecting whether the RS-232C connector is to function. 0000 OFF : The RS-232C connector does not function. 0001 ON : The RS-232C connector functions. 87 Setup menus The underlining (__) denotes the factory setting mode. <INTERF ACE> No./Item Description of setting 200 PARA RUN For selecting whether to operate two or more V ...

  • Panasonic AJ-HD1700 - page 88

    88 Setup menus The underlining (__) denotes the factory setting mode. <EDIT> No./Item Description of setting 300 IN/OUT DEL For selecting the operation to be performed when an edit point has been set incorrectly (when the OUT point comes before the IN point). 0000 MANU : Editing is not performed unless the illegal edit point is cleared or set ...

  • Panasonic AJ-HD1700 - page 89

    89 Setup menus The underlining (__) denotes the factory setting mode. <EDIT> (continued) No./Item Description of setting No./Item Description of setting 324* 1 EDIT RPLCEC As with setup menu item No.320, the VTR’s CUE edit presets are set to ON or OFF following the analog audio signals specified by the editor or controller. 0000 N-DEF : Not ...

  • Panasonic AJ-HD1700 - page 90

    90 Setup menus The underlining (__) denotes the factory setting mode. <Precaution for STILL TIMER item setting> The cumulative total standby time passed in the same location increases at such times when the same material is repeatedly used as is the case when programs are transmitted, for example. <T APE PROTECT> No./Item Description of ...

  • Panasonic AJ-HD1700 - page 91

    91 Setup menus The underlining (__) denotes the factory setting mode. <TIME CODE> No./Item Description of setting 500* 4 VITC BLANK For selecting whether or not to output the VITC signal at the positions selected by setup menu items No.501 (VITC POS-1) and No.502 (VITC POS-2). 0000 BLANK : The VITC signal is not output. 0001 THRU : The VITC s ...

  • Panasonic AJ-HD1700 - page 92

    92 513 VITC OUT For selecting how to output the VITC which is superimposed on the output video signal. 0000 SBC : In the playback mode, the time code recorded in the SBC area is output. 0001 VAUX : In the playback mode, the time code recorded in the VAUX area is output. <Note> The VITC information detected by the HD serial input is automatica ...

  • Panasonic AJ-HD1700 - page 93

    For accentuating the horizontal contours during down-conversion and line conversion (1080i <> 720p). 0000 0dB 0001 i 0.7dB 0002 i 1dB 0003 i 1. 2dB 0004 i 1.5dB 0005 i 2dB 93 Setup menus The underlining (__) denotes the factory setting mode. <VIDEO> No./Item Description of setting No./Item Description of setting 601* 1 VIDEO INT SG For ...

  • Panasonic AJ-HD1700 - page 94

    94 Setup menus The underlining (__) denotes the factory setting mode. <VIDEO> (continued) No./Item Description of setting No./Item Description of setting 627 D/C ENH V For accentuating the vertical contours during down-conversion and line conversion (1080i <> 720p). 0000 0dB 0001 i 0.7dB 0002 i 1dB 0003 i 1.2dB 0004 i 1.5dB 0005 i 2dB 6 ...

  • Panasonic AJ-HD1700 - page 95

    95 Setup menus <Note> Setup menu items No.638, 639, 640, 641 and 642 do not function when the AJ-UC1700G optional board has not been installed. The underlining (__) denotes the factory setting mode. *UP: With HD output (HD tape playback or up-converted output) *DW: With SD output (SD tape playback or down-converted output) <VIDEO> (cont ...

  • Panasonic AJ-HD1700 - page 96

    96 Setup menus The underlining (__) denotes the factory setting mode. *DW: With SD output (SD tape playback or down-converted output) <VIDEO> (continued) No./Item Description of setting No./Item Description of setting 663 C LEVEL For adjusting the chroma level of the HD SDI output, SD SDI output and VIDEO output. ( j¶ to 0 dB to i 3 dB) 0000 ...

  • Panasonic AJ-HD1700 - page 97

    97 The underlining (__) denotes the factory setting mode. *UP: With HD output (HD tape playback or up-converted output) *DW: With SD output (SD tape playback or down-converted output) No./Item Description of setting Setup menus <VIDEO> (continued) No./Item Description of setting 680* 2 CC (F1) BLANK* DW For selecting ON or OFF for the closed ...

  • Panasonic AJ-HD1700 - page 98

    98 Setup menus The underlining (__) denotes the factory setting mode. <AUDIO> No./Item Description of setting No./Item Description of setting 700* 1 CH1 IN LV For selecting the audio input (CH1) reference level. 0000 4dB 0001 0dB 0002 j 20dB 701* 1 CH2 IN LV For selecting the audio input (CH2) reference level. 0000 4dB 0001 0dB 0002 j 20dB 70 ...

  • Panasonic AJ-HD1700 - page 99

    99 717* 1 CH5 IN SEL For selecting the CH5 input signal. 0000 INT SG : The internal signal is selected. 0001 DIGI : Digital input signals are selected. 0002 ANA : Analog input signals are selected. (CH1 input) <Note> When DIGI has been selected, whether serial or AES is selected for the input is determined by the setting selected for setup me ...

  • Panasonic AJ-HD1700 - page 100

    100 733* 1 REC CUE For selecting the input signals to be recorded on the CUE track. 0000 CUE : CUE IN 0001 CH1 : Audio input CH1 signals 0002 CH2 : Audio input CH2 signals 0003 CH3 : Audio input CH3 signals 0004 CH4 : Audio input CH4 signals 0005 CH5 : Audio input CH5 signals 0006 CH6 : Audio input CH6 signals 0007 CH7 : Audio input CH7 signals 000 ...

  • Panasonic AJ-HD1700 - page 101

    101 Setup menus The underlining (__) denotes the factory setting mode. <AUDIO> (continued) No./Item Description of setting No./Item Description of setting 739 CH2 CUE SEL For selecting the CH2 output status of the main signal line in the search mode. 0000 OFF : The CUE signal is not output. 0001 ON : The CUE signal is output. <Note> For ...

  • Panasonic AJ-HD1700 - page 102

    102 749* 1 AUDIO PB VR For selecting whether the playback level adjustment controls are to function in the EE mode when INT SG has been selected on the <AUDIO> function menu. 0000 DIS : The INT SG output level is fixed at the UNITY level. 0001 ENA : The INT SG output level can be varied using the playback level adjustment controls. Setup menu ...

  • Panasonic AJ-HD1700 - page 103

    103 Setup menus <AUDIO> (continued) No./Item Description of setting No./Item Description of setting 763 METER SCALE (This menu is not displayed for AJ-HD1700E.) For selecting the scale display of the audio level meter. 0000 PEAK_0 : [The audio level is displayed with 0 dB as the maximum level. 0001 REF_0 : The audio level is displayed with 0 ...

  • Panasonic AJ-HD1700 - page 104

    104 Setup menus The underlining (__) denotes the factory setting mode. <MENU> No./Item Description of setting A02 P. ON LOAD This VTR is equipped with VTR MEMORY for storing the current settings (* 1 ) and VTR MEMORY to for backing up VTR MEMORY . The data of a selected VTR MEMORY to can be loaded into VTR MEMORY and operation started on the ...

  • Panasonic AJ-HD1700 - page 105

    105 Setup menus Follow the steps below to switch the system frequency (59/60 Hz, 50 Hz, 23/24 Hz, 25 Hz (HD) or 25 Hz(SD)). <How to switch the system frequency> 1 Following the procedure for the <SETUP MENU/SYSTEM MENU> (page 60) to change the system menu item No.25 (SYSTEM FREQ) setting. 2 Press (SET) to enter the setting, and after th ...

  • Panasonic AJ-HD1700 - page 106

    2F 106 2F 2F Setup menus <Menu management accompanying switching the system frequency> The system menu and setup menu have some items whose settings differ and other items with which no selection options are displayed and whose settings are fixed (indicated by the shading in the table below), depending on the switching of the operation mode i ...

  • Panasonic AJ-HD1700 - page 107

    60/24 107 Setup menus No. Menu item System menu No.25 (SYSTEM FREQ) 59/60 23/24 50 25 (HD) d 12h 24h Same as for 59/60 002 TAPE TIMER OFF ON 004 SYNCHRONIZE MANU AUTO 010 MONI CONTROL 0s to 3s to 5s 012 REC ADJUST OFF ON 013 DET STOP AUTO INPUT HD_REF SD_REF HD_REF Same as for 59/60 Same as for 59/60 031 OUT REF S/F/R STOP 105 AUTO EE SEL NORMAL TH ...

  • Panasonic AJ-HD1700 - page 108

    OFF OFF Same as for 59/60 PRE PRE 50 Same as for 59/60 108 BLANK THRU BLANK BLANK 500 VITC BLANK Setup menus Setup menus No. Menu item System menu No.25 (SYSTEM FREQ) 59/60 23/24 25 (HD) 25 (SD) N-DEF CH1 CH2 CH1+3 320 EDIT RPLCE1 321 EDIT RPLCE2 322 EDIT RPLCE3 323 EDIT RPLCE4 Same as for 59/60 324 EDIT RPLCEC REGEN PRE AUTO PRE 503 TCG MODE TC&am ...

  • Panasonic AJ-HD1700 - page 109

    109 Setup menus Setup menus No. Menu item System menu No.25 (SYSTEM FREQ) 59/60 23/24 50 25 (HD) 25 (SD) The underlining (__) denotes the factory setting mode. BLANK 1080i 720p - - - 634 480p # HD OUT 480p 480p 480i 635 480p # SD OUT 1080i 720p - - - 636 480i # HD OUT 480i 480i 480p 637 480i # SD OUT FIT_V FIT_H FIT_HV Same as for 59/60 638 IN U/C ...

  • Panasonic AJ-HD1700 - page 110

    Same as for 59/60 25 (SD) 110 Setup menus No. Menu item System menu No.25 (SYSTEM FREQ) 59/60 23/24 50 25 (HD) Setup menus The underlining (__) denotes the factory setting mode. 719 CH7 IN SEL 720 CH8 IN SEL AES SDI 721 D IN SEL 12 722 D IN SEL 34 723 D IN SEL 56 724 D IN SEL 78 CH1 to CH3 i 4 725 REC CH1 726 REC CH2 727 REC CH3 728 REC CH4 CH5 to ...

  • Panasonic AJ-HD1700 - page 111

    111 T ime code and user ’s bit T i me code The time code is used when the time code signal generated by the time code generator (time code signal generator) is to be recorded on the tape, its values are to be read by the time code reader (time code signal reader), and the absolute position of the tape is to be displayed in increments of hours, mi ...

  • Panasonic AJ-HD1700 - page 112

    112 Concerning the time code and user ’s bit Setting the external time code 1 Set the VTR to the stop mode. 3 If the video input has been set to HD SDI input or INT SG, set TC SRC on the <TC> menu to EXT-L, SLTC or SVITC. F1 4 If the video input has been set to SD SDI (when the optional board has been installed), set TC SRC on the <TC> ...

  • Panasonic AJ-HD1700 - page 113

    113 Display position The position of the characters superimposed on the display can be changed using (C HPOS) and (C VPOS) on the <TC SHIFT> menu and the ADJ dial. F3 F2 Superimpose screen The control signals, time code, etc. are displayed on this screen using abbreviations. TCR 22 : 22 : 22 : 22 TV monitor TCR 22 : 22 : 22 : 22 TV monitor TC ...

  • Panasonic AJ-HD1700 - page 114

    114 POWER OFF ON HEADPHONES PUSH LOCK FULL CH CONDITION MONITOR FULL/FINE REMOTE LR 9P 50P RS-232C CH 1 2345678 CUE XL/L/M - cassette Do not insert S-cassette without adapter EJECT AUDIO CH SELECT SHIFT ABC DEF GHI JKL MNO PQRS PREVIEW/ REVIEW PRE- ROLL A IN A OUT HOME RF1 ASSEM ADJUST SHTL REV FWD VAR JOG STAND BY RECORDER INPUT CHECK PLAYER SERVO ...

  • Panasonic AJ-HD1700 - page 115

    115 Display saving function This function is provided to extend the service life of the LCD monitor. It starts up if none of the front panel controls have been operated or the cassette tape has not been run at all for about 5 minutes. While the saving function is working, the LCD monitor display goes blank, and the “EX” symbol appears on the ti ...

  • Panasonic AJ-HD1700 - page 116

    116 AB C D E F G H 2 Attach the outer member brackets to the rack. Check that the height is the same for the left and right brackets. 3 Remove the four screws at the front used to attach the left and right side panels. 4 Attach the AJ-MA75P rack-mounting adapters using the same four screws. 1 Attach the inner members of the slide rails. Refer to th ...

  • Panasonic AJ-HD1700 - page 117

    117 This VTR is equipped with an auto head cleaning function which automatically reduces the amount of dirt on the video heads. In order to maximize the VTR’s reliability, however, it is recommended that the video heads be cleaned as and when appropriate. For further details on how to actually clean the heads, consult with one of Panasonic’s se ...

  • Panasonic AJ-HD1700 - page 118

    118 When a warning occurs in this VTR, the warning lamp lights up. When the DIAG menu is opened, a description of the warning will appear on the front panel LCD area and TV monitor. Also, when an abnormal operation is detected in this VTR, the AUTO OFF lamp lights up, and a message appears on the time code display area. DIAG menu This displays the ...

  • Panasonic AJ-HD1700 - page 119

    119 If “T&S&M” has been selected as the setup menu item No.006 (DISPLAY SEL) setting, a message appears in the mode display area whenever a warning or error has occurred. When a multiple number of errors have occurred, the one with the highest priority is displayed. Error messages Priority Display and description Higher Lower Error mess ...

  • Panasonic AJ-HD1700 - page 120

    120 Higher Lower Error messages Display • Description • VTR operation and remedial action W arning messages Error messages Priority • Display • Description • VTR operation and remedial action SERVO NOT LOCKED This is displayed when the servo is not locked for 3 or more seconds during playback, recording or editing. VTR: Operation continue ...

  • Panasonic AJ-HD1700 - page 121

    121 Error messages Display • Description • VTR operation and remedial action T REEL TORQUE ERR If an abnormal torque applied to the take-up reel motor is detected, the AUTO OFF lamp lights, and the message display blinks. VTR: Stops. • Set the POWER switch to OFF and then back to ON again. S REEL TORQUE ERR If an abnormal torque applied to th ...

  • Panasonic AJ-HD1700 - page 122

    122 The VTR can be operated by commands when the RS-232C interface is used. (Refer to the command tables on page 125 and 126.) ∫ Condition for acknowledging commands from RS-232C interface Setup menu item No.204 (RS232C SEL): ON If the above condition is not met, [ACK]+[STX]ER001[EXT] is returned to the external component. Whether [ACK] is return ...

  • Panasonic AJ-HD1700 - page 123

    123 Software specifications (protocol) 1. Communication parameters RS-232C interface Communication system Asynchronous, full duplex Transfer rate 300, 600, 1200, 2400, 4800 or 9600 bps Bit length 7 bits or 8 bits Stop bit 1 bit or 2 bits Parity bit None, odd or even ACK code Returned or not returned <Note> ACK is the code which is returned fr ...

  • Panasonic AJ-HD1700 - page 124

    124 RS-232C interface 3. Return format [VTR > controller (PC)] The following responses are made to the commands. If necessary, more than one response is made. ∫ When the communication has ended successfully 1. The receive completion message is returned. [ACK] 06h 2 . The execution completion message is returned. [STX] [command] [data] [ETX] 02 ...

  • Panasonic AJ-HD1700 - page 125

    125 RS-232C interface 5. Command table ∫ Commands relating to operation control <Notes> • As the return (completion) message, [ACK] is returned when data is received, and only the execution message which is subsequently returned is listed in the table. • If a command not listed in the table is received, ER001 (invalid command) is return ...

  • Panasonic AJ-HD1700 - page 126

    126 RS-232C interface ∫ Commands relating to inquiries <Notes> • In terms of the return (completion) message, [ACK] is returned when data is received, and only the execution message which is subsequently returned is listed in the table. • In the case of commands not listed in the table below, ER001 (invalid command) is returned after [A ...

  • Panasonic AJ-HD1700 - page 127

    127 RS-232C interface ∫ Microsoft QuickBASIC sample program CLS STX$ = CHR$(&H2): ETX$ = CHR$ (&H3): NAK$ = CHR$(15): ACK$ = CHR$(&H6) PRINT "*** RS-232C COMMUNICATION SAMPLE PROGRAM ***" PRINT "Type Command 'QUIT' to quit." PRINT REM *** Communication Port Initial & Open *** REM Port 1,9600Bps,No par ...

  • Panasonic AJ-HD1700 - page 128

    128 Connector signals VIDEO IN HD SERIAL IN (DIGITAL) BNC k 1, active-through (BNC k 1) HD REF IN BNC k 2, loop-through, 75 ™ termination switch provided SD REF IN BNC k 2, loop-through, 75 ™ termination switch provided SD SERIAL IN (DIGITAL) BNC k 1, active-through (BNC k 1) (board, option) SDTI IN BNC k 1 (board, option) VIDEO OUT HD SERIAL O ...

  • Panasonic AJ-HD1700 - page 129

    CUE INPUT IMPEDANCE SW This sets the CUE input impedance. HIGH/600 ™ 129 Connector signals P ARALLEL REMOTE (50P) Refer to 50P IN/OUT ASSIGN on the function menu (page 75) for the connection pin signals. ENCODER REMOTE(15P) Pin No. Signal 1 FRAME GROUND 4 REM (G) 7 REM RX (X) REMOTE CONTROL PROTOCOL RECEIVE 8 REM TX (X) REMOTE CONTROL PROTOCOL TR ...

  • Panasonic AJ-HD1700 - page 130

    130 [GENERAL] indicates the safety information. Power supply: AC 100–240V, 50–60 Hz (AJ-HD1700P) AC 100–240V, 50–60 Hz (AJ-HD1700E) Power consumption: 240W Operating ambient temperature: 41 x F to 104 x F (5 x C to 40 x C) Operating ambient humidity: 10% to 80% (no condensation) Weight: Approx. 48.4 lbs (22 kg) Dimensions (W k H k D): 16-3/ ...

  • Panasonic AJ-HD1700 - page 131

    131 Specifications [VIDEO] Video signal adjustment ranges • Component style HD/SD SDI, composite output Y gain: j¶ to i 3 dB HD/SD SDI, composite output Pb gain: j¶ to i 3 dB HD/SD SDI, composite output Pr gain: j¶ to i 3 dB HD/SD SDI, composite output Y black level: w 10% • Composite style HD/SD SDI, composite output video gain: j¶ to i 6 ...

  • Panasonic AJ-HD1700 - page 132

    132 Specifications [OPTIONAL ACCESSORIES] Rack-mounting adapters: AJ-MA75P SD-HD format converter board: AJ-UC1700G Encoder/decoder board supporting DVCPRO HD bank data: AJ-VNC150P SDTI interface board: AJ-YAC150P Weight and dimensions shown are approximate. Specifications are subject to change without notice. [OTHER INPUT/OUTPUT SIGNALS] Time code ...

  • Panasonic AJ-HD1700 - page 133

    133 ...

  • Panasonic AJ-HD1700 - page 134

    F0703H1 @ 32 PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY UNIT COMPANY OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7000 EASTERN ZONE: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Southeast Region: 1225 Northbrook Parkway, Ste 1-160, Suwanee, GA 30024 (770) ...

Manufacturer Panasonic Category VCR

Documents that we receive from a manufacturer of a Panasonic AJ-HD1700 can be divided into several groups. They are, among others:
- Panasonic technical drawings
- AJ-HD1700 manuals
- Panasonic product data sheets
- information booklets
- or energy labels Panasonic AJ-HD1700
All of them are important, but the most important information from the point of view of use of the device are in the user manual Panasonic AJ-HD1700.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Panasonic AJ-HD1700, service manual, brief instructions and user manuals Panasonic AJ-HD1700. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Panasonic AJ-HD1700.

Similar manuals

A complete manual for the device Panasonic AJ-HD1700, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Panasonic AJ-HD1700 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Panasonic AJ-HD1700.

A complete Panasonic manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Panasonic AJ-HD1700 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Panasonic AJ-HD1700, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Panasonic AJ-HD1700, that we can find in the current document
3. Tips how to use the basic functions of the device Panasonic AJ-HD1700 - which should help us in our first steps of using Panasonic AJ-HD1700
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Panasonic AJ-HD1700
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Panasonic AJ-HD1700 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Panasonic AJ-HD1700?

Use the form below

If you did not solve your problem by using a manual Panasonic AJ-HD1700, ask a question using the form below. If a user had a similar problem with Panasonic AJ-HD1700 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)