English dropdown-ico

Manual Kenwood KRC-665

42 pages 1.15 mb
Download

Go to site of 42

Summary
  • Kenwood KRC-665 - page 1

    KRC-765 KRC-665 KRC-665R © B64-2236-00 (MW/IW) CASSETTE RECEIVER INSTR UCTION MANU AL KRC-765/665/665R(M) Cover 03.2.21 4:36 PM Page 1 ...

  • Kenwood KRC-665 - page 2

    — 2 — English Contents Safety precautions .................................3 About Cassette tape ..............................4 About RDS .............................................4 General features.....................................5 Power Selecting the Source V olume Attenuator Loudness System Q Audio Control Speaker Setting Switching D ...

  • Kenwood KRC-665 - page 3

    — 3 — To prevent injury or fire, take the following precautions: • Insert the unit all the way in until it is fully locked in place. Otherwise it may fall out of place when jolted. • When extending the ignition, battery , or ground wires, make sure to use automotive- grade wires or other wires with a 0.75mm 2 (A WG18) or more to prevent wir ...

  • Kenwood KRC-665 - page 4

    — 4 — English • If you experience problems during installation, consult your Kenwood dealer . • If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer . •P ress the reset button if the Disc auto changer fails to operate correctly . Normal operatio ...

  • Kenwood KRC-665 - page 5

    Press the [SRC] button. Source required Display T uner "TUNER" T ape "T APE" External disc "DISC-CH" Auxiliary input "AUX" Standby (Illumination only mode) "ALL OFF" For Auxiliary input one of the below optional accessories is necessary . - KCA-S210A - CA-C1AX - CD changer with an Auxiliary input fu ...

  • Kenwood KRC-665 - page 6

    1 Select the source for adjustment Press the [SRC] button. 2 Enter Audio Control mode Press the [AUD] button for at least 1 second. 3 Select the Audio item for adjustment Press the [FM] or [AM] button. Each time the button is pressed the items that can be adjusted switch as shown below . 4 Adjust the Audio item Press the [ 4 ] or [ ¢ ] button. Adj ...

  • Kenwood KRC-665 - page 7

    Press the [DISP] button. Each time the button is pressed the display switches as shown below . In T uner source Information Display Frequency (KRC-765/KRC-665) Station name (KRC-765/KRC-665) "SNPS" Program Service name or Frequency (KRC-665R) Radio text (KRC-665R) "R-TEXT" Clock Displaying the frequency during Program Service na ...

  • Kenwood KRC-665 - page 8

    Selecting the display when this device is switched to Auxiliary input source. 1 Select Auxiliary input source Press the [SRC] button. Select the "AUX" display . 2 Enter Auxiliary input display setting mode Press the [DISP] button for at least 2 seconds. The presently selected AUX Name is blinks. 3 Select the Auxiliary input display Press ...

  • Kenwood KRC-665 - page 9

    Function of the KRC-665R The audio system automatically mutes when a call comes in. When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. When the call ends Hang up the phone. The "CALL ...

  • Kenwood KRC-665 - page 10

    Entering the frequency and tuning. 1 Select the band Press the [FM] or [AM] button. 2 Enter Direct Access T uning mode Press the [DIRECT] button on the remote. "– – – –" is displayed. 3 Enter the frequency Press the number buttons on the remote. Example: Desired frequency Press button 92.1 MHz (FM) [#0], [#9], [#2], [#1] 810 kHz ( ...

  • Kenwood KRC-665 - page 11

    Calling up the stations in the memory . 1 Select the band Press the [FM] or [AM] button. 2 Call up the station Press the [#1] — [#6] button. Preset T uning stations preset in the FM1 band aren't put in the memory . Likewise, when it is done in the FM3 band, RDS stations preset in FM1 or FM2 aren't put in the memory . Putting a station w ...

  • Kenwood KRC-665 - page 12

    Selecting the Program T ype and searching for a station. 1 Enter PTY mode Press the [PTY] button. During PTY mode the "PTY" indicator is ON. PTY (Program T ype) Scrolling the displayed radio text. Press the [DISP] button for at least 1 second. Radio T ext Scroll Switching to traffic information automatically when a traffic bulletin starts ...

  • Kenwood KRC-665 - page 13

    27. Country Music "COUNTRY" 28. National Music "NA TION M" 29. Oldies Music "OLDIES" 30. Folk Music "FOLK M" 31. Documentary "DOCUMENT " • Speech and Music include the Program type shown below . Speech: No.3 — 11, 18 — 25, 31 Music: No.12 — 17, 26 — 30 • The Program T ype can be put in t ...

  • Kenwood KRC-665 - page 14

    4 Exit Changing Language mode Press the [DISP] button. Selecting the Program T ype display language. 1 Enter PTY mode Refer to <PTY (Program T ype)> (page 12). 2 Enter Changing Language mode Press the [DISP] button. 3 Select the language Press the [FM] or [AM] button. Each time the button is pressed the language switches as shown below . Lang ...

  • Kenwood KRC-665 - page 15

    Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display . 2 Select the band Press the [FM] or [AM] button. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. 3 T une up or down band Press the [ 4 ] or [ ¢ ] button. During reception of stereo stations the "ST& ...

  • Kenwood KRC-665 - page 16

    Changing the tuning frequency step. The original setting is FM band 50 kHz, and AM band 9 kHz. While pressing the [#1] and [#5] button, press the Reset button. The frequency step changes to FM band 200 kHz, and AM band 10 kHz. • When the same operation is repeated, it returns to the original setting. • When the frequency step is switched, the f ...

  • Kenwood KRC-665 - page 17

    When there's no Cassette T ape inserted 1 Drop open the faceplate Press the Release button. 2 Insert a Cassette T ape. 3 Press the faceplate on the right side, and return it to its former position. • When the faceplate has been dropped open, it might interfere with the shift lever or something else. If this happens, pay attention to safety a ...

  • Kenwood KRC-665 - page 18

    Repeating the present song. Press the [REP] button. Each time the button is pressed the Music Repeat turns ON or OFF . When it's ON, "REP ON" is displayed. Music Repeat Fast forwarding automatically when an unrecorded portion continues for at least 10 seconds. Press the [B.S] button. Each time the button is pressed the Blank Skip tur ...

  • Kenwood KRC-665 - page 19

    Fast Forwarding Hold down on the [ ¢ ] button. Release your finger to play the disc at that point. Reversing Hold down on the [ 4 ] button. Release your finger to play the disc at that point. Fast Forwarding and Reversing Playing discs set in the optional accessory disc player connected to this unit. Press the [SRC] button. Select the display for ...

  • Kenwood KRC-665 - page 20

    Playing all the songs on the disc in random order . Press the [RDM] button. Each time the button is pressed Random Play turns ON or OFF . Random Play Playing the first part of each song on the disc you are listening to and searching for the song you want to listen to. 1 Start T rack Scan Press the [SCAN] button. "Scan ON"/"SCAN ON&qu ...

  • Kenwood KRC-665 - page 21

    Press the [ 4 ] or [ ¢ ] button. 4 Select the characters Press the [FM] or [AM] button. Characters can be entered by using a remote with a number button. Example: If "DANCE" is entered. Character Button #T imes pressed "D" [#3] 1 "A" [#2] 1 "N" [#6] 2 "C" [#2] 3 "E" [#3] 2 5 Repeat steps ...

  • Kenwood KRC-665 - page 22

    Menu system Selecting the CD displayed in the DNPS of the CDs set in the Disc changer . 1 Enter DNPP mode Press the [DNPP] button on the remote. When "DNPP" is displayed the DNPS display in order . Forward / Reverse display Press the [DISC–] or [DISC+] button. 2 When the disc you want is displayed Press the [OK] button on the remote. Th ...

  • Kenwood KRC-665 - page 23

    Setting during operation beep sound etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 2 Select the menu item Press the [FM] or [AM] bu ...

  • Kenwood KRC-665 - page 24

    This adjustment can be done when the <Synchronize Clock> (page 25) is set as OFF . (KRC-665R only) 1 Select Clock Adjustment mode Press the [FM] or [AM] button. Select the "CLK ADJ" display . Manual Clock Adjustment Setting the operation check sound (beep sound) ON/OFF . Display Setting "Beep ON"/"BEEP ON" Beep i ...

  • Kenwood KRC-665 - page 25

    Function of the KRC-765 Setting the Display type. Display Setting "DisplayD" Demonstration. "DisplayA" Circle Display is play time. "DisplayB" Circle Display is clock. "DisplayC" Silent display type. Switching Display T ype Function of the KRC-665/KRC-665R Setting the graphic part display ON/OFF . Display Set ...

  • Kenwood KRC-665 - page 26

    Function of the KRC-665R Sets the tuning mode. T uning mode Display Operation Auto seek "AUTO 1" Automatic search for a station. Preset station seek " AUTO 2" Search in order of the stations in the Preset memory . Manual "Manual"/ Normal manual tuning control. "MANUAL " T uning Mode <In T uner mode> Fun ...

  • Kenwood KRC-665 - page 27

    Function of the KRC-665R When the TI function is ON and poor reception conditions are experienced when listening to a traffic information station, another traffic information station with better reception will be searched for automatically . Display Setting "A TPS ON" The Auto TP Seek Function is ON. "A TPS OFF" The Auto TP Seek ...

  • Kenwood KRC-665 - page 28

    Basic Operations of remote Function of the KRC-765/KRC-665 Setting the displayed text scroll. Display Setting "SCL AUTO" Repeats scroll. "SCL MANU" Scrolls when the display changes. The text scrolled is shown below . • CD text • MD title T ext Scroll <In External disc control mode> Function of the KRC-665R Noise can be ...

  • Kenwood KRC-665 - page 29

    [FM]/ [AM] buttons Select the band. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. [ 4 ]/ [ ¢ ] buttons T une up or down band. [#0] — [#9] buttons Press buttons [#1] — [#6] to recall preset stations. [DIRECT] button Enters and cancels the <Direct Access T uning> (page 10,16) mode. [ 38 ] button (KRC ...

  • Kenwood KRC-665 - page 30

    [ 4 ]/ [ ¢ ] buttons Doing track forward and backward. [DISC+]/ [DISC–] buttons Doing album forward and backward. [ 38 ] button Each time the button is pressed the song pauses and plays. [DNPP]/ [OK] button Enters and cancels the <DNPP (Disc Name Preset Play)> (page 22) mode. [#0] — [#9] buttons When in <Direct T rack Search> (page ...

  • Kenwood KRC-665 - page 31

    — 31 — — 31 — The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above. 1. T o prevent a short circuit, remove the key from the ignition and disconnect the - battery . 2. Make the proper input and output wire connections for each unit ...

  • Kenwood KRC-665 - page 32

    English — 32 — — 32 — P.CONT ANT. CONT. ILLUMI FRONT • L FRONT • R REAR • L REAR • R – + Wiring harness (Accessory 1 ) 25 29 White/Black 32 Gray/Black 35 Green/Black 38 Purple/Black White 31 Gray 34 Green 37 Purple 40 To front left speaker 30 To front right speaker 33 To rear right speaker 39 To rear left speaker 36 Ignition wire ...

  • Kenwood KRC-665 - page 33

    — 33 — — 33 — Accessories (KRC-665R) The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above. 1. T o prevent a short circuit, remove the key from the ignition and disconnect the - battery . 2. Make the proper input and output wire co ...

  • Kenwood KRC-665 - page 34

    English — 34 — — 34 — Connecting Wires to T erminals (KRC-665R) 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 TEL MUTE P.CONT ANT.CONT Rear right output (Red) 4 10 Rear left output (White) Front left output (White) 12 Front right output (Red) 5 Connector Function Guide Pin Numbers for ISO Connectors Cable Color Functions External Power Connector A–4 A? ...

  • Kenwood KRC-665 - page 35

    — 35 — Connecting Wires to T erminals (KRC-665R) Connecting the ISO Connector (see p .23) The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit. The default connection for the wiring harness is described in 1 below . If the ISO connector pins a ...

  • Kenwood KRC-665 - page 36

    English — 36 — Accessory 5 If you want to fasten the faceplate to the main unit so that it does not fall off, screw in the provided screws (ø4 X 16 mm) in the holes shown below . Bottom panel — 36 — Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). Metal m ...

  • Kenwood KRC-665 - page 37

    — 37 — — 37 — Accessory 2 Removal tool Screw (M4X8) (commercially available) ■ Removing the Unit 4 Lower the removal tool toward the bottom, and pull out the unit halfway while pressing towards the inside. Be careful to avoid injury from the catch pins on the removal tool. 5 Pull the unit all the way out with your hands, being careful not ...

  • Kenwood KRC-665 - page 38

    English — 38 — What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General ? The power does not turn ON. 01 ✔ The fuse has blown. ☞ After checking for short circuits in the wires, replace the fuse with one ...

  • Kenwood KRC-665 - page 39

    — 39 — Tr o ubleshooting Guide Cassette tape source ? Can’ t remove tape. 44 ✔ The cause is that more than 10 minutes has elapsed since the vehicle ACC switch was turned OFF . ☞ The tape can only be removed within 10 minutes of the ACC switch being turned OFF . If more than 10 minutes has elapsed, turn the ACC switch ON again and press th ...

  • Kenwood KRC-665 - page 40

    English — 40 — Tr o u bleshooting Guide ? T rack Search can't be done. 66-2 ✔ For the albums first or last song. ☞ For each album, T rack Search can't be done in the backward direction for the first song or in the forward direction for the last song. If the following situations, consult your nearest service center: • Even though ...

  • Kenwood KRC-665 - page 41

    — 41 — Tr o ubleshooting Guide HOLD ER: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. E0d ➪ Cool down the unit by opening the windows or turning on the air conditioner . As the temperature falls below 60°C (140°F), the disc will start playi ...

  • Kenwood KRC-665 - page 42

    — 42 — English Specifications FM tuner section (KRC-765 / KRC-665) Frequency range (50 kHz space) .................................87.5 MHz –108.0 MHz (200 kHz space) ...............................87.9 MHz –107.9 MHz Usable sensitivity (S/N = 30dB) ................... 9.3 dBf (0.8 µV/75 Ω ) Quieting Sensitivity (S/N = 50dB) ............ ...

Manufacturer Kenwood Category Cassette Player

Documents that we receive from a manufacturer of a Kenwood KRC-665 can be divided into several groups. They are, among others:
- Kenwood technical drawings
- KRC-665 manuals
- Kenwood product data sheets
- information booklets
- or energy labels Kenwood KRC-665
All of them are important, but the most important information from the point of view of use of the device are in the user manual Kenwood KRC-665.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Kenwood KRC-665, service manual, brief instructions and user manuals Kenwood KRC-665. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Kenwood KRC-665.

Similar manuals

A complete manual for the device Kenwood KRC-665, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Kenwood KRC-665 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Kenwood KRC-665.

A complete Kenwood manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Kenwood KRC-665 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Kenwood KRC-665, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Kenwood KRC-665, that we can find in the current document
3. Tips how to use the basic functions of the device Kenwood KRC-665 - which should help us in our first steps of using Kenwood KRC-665
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Kenwood KRC-665
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Kenwood KRC-665 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Kenwood KRC-665?

Use the form below

If you did not solve your problem by using a manual Kenwood KRC-665, ask a question using the form below. If a user had a similar problem with Kenwood KRC-665 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)