English dropdown-ico

Manual Raritan Computer II

96 pages 2 mb
Download

Go to site of 96

Summary
  • Raritan Computer II - page 1

    User Manual Paragon II ...

  • Raritan Computer II - page 2

    This page intentionally left blank ...

  • Raritan Computer II - page 3

    User Manual Paragon II Copyright © 2003 Raritan Computer, Inc. PII-0A-E December 2003 255-30-6000 Raritan Computer Inc. 400 Cottontail Lane Somerset, NJ 08873 USA Tel. 1-732-764-8886 Fax. 1-732-764-8 887 E-mail: sales@ raritan.com http://www.raritan.com Raritan Computer Europe, B.V. Eglantierbaan 16 2908 LV Capelle aan den IJssel The Netherlands T ...

  • Raritan Computer II - page 4

    This page intentionally left blank ...

  • Raritan Computer II - page 5

    FCC Infor mation This equipment has been tested and foun d to comply with the limits for a Class A digital device, pursuant to Part 15 of t he FCC Rules. These limi ts are designed to provide reas onable prot ection against ha rmful interference in a commercial installation . This equipm ent generates, uses, and can radiate ra dio frequency energ y ...

  • Raritan Computer II - page 6

    ...

  • Raritan Computer II - page 7

    T ABLE OF C ONTENTS i Table of Contents Chapter 1: In troduction .................................................................. 1 Paragon II Overview............................................................................................................ ....... 1 Product Photos ............................................................... ...

  • Raritan Computer II - page 8

    ii P ARAGON II U SER M ANUAL Illegal Configuration .......................................................................................................... ....... 62 Loop-Back Configuration....................................................... ................................................. ..62 Appendix A: Speci ficati ons .................. ...

  • Raritan Computer II - page 9

    T ABLE OF F IGURES iii Table of Figures Figure 1 Paragon II Base Units ................................................................................................. .......2 Figure 2 P2-UMT832, P2-UST, and P2CIM-PS2 ..................... ........................................................ 2 Figure 3 Installation Diagram ................... ...

  • Raritan Computer II - page 10

    iv P ARAGON II U SER M ANUAL Figure 47 Stacking - Single Base Co nfig uration wi th P2-UMT832M and P2-UMT 832S................ 55 Figure 48 Stacking - Single Base Co nfig uration wi th P2-UMT832M and P2-UMT 832S................ 55 Figure 49 Stacking - Single Base Co nfig uration wi th P2-UMT832M and P2-UMT 832S................ 56 Figure 50 Stacking ...

  • Raritan Computer II - page 11

    C HAPTER 1: I NTRODUCTION 1 Chapter 1: Introduction Congratulations on you r purchase of Raritan’s Par agon II! The Paragon family is abou t breaking away fro m the traditional, exp ensive model of server manag ement – one server, one dedicated monitor, one dedicated keyboard. Para gon allows fo r a single user st ation (moni tor, keyboa rd, an ...

  • Raritan Computer II - page 12

    2 P ARAGON II U SER M ANUAL Product Photos Figure 1 Paragon II Base Units Figure 2 P2-UMT832, P2-UST, and P2CI M-PS2 ...

  • Raritan Computer II - page 13

    C HAPTER 1: I NTRODUCTION 3 Product Features • 2U design s upports 16 u sers, 64 ser vers (m odel P2-UMT 1664M) • 1U design su pports 8 users, 32 servers (model P2- UMT832M) • 1U design su pports 4 users, 42 servers (model P2- UMT442) • 1U design su pports 2 users, 42 servers (model P2- UMT242) • Expands to 32 users wit h Raritan’s U KV ...

  • Raritan Computer II - page 14

    4 P ARAGON II U SER M ANUAL Package Contents Each Paragon Base Unit (P2-UMT242, P2-UMT442, P2-UMT832 M, or P2-UMT1664M) ships with: • (1) Base Unit • (2) 20-ft. (6. 1-m) CAT5 test cables • (1) Pair of rac kmount b rackets and associat ed screws • (1) 6-ft. (1 .8-m) AC p ower cord • RUMT-1U -LM304 R ackm ount kit • CAT5 admin cable • R ...

  • Raritan Computer II - page 15

    C HAPTER 2: I NSTALLATION 5 Chapter 2: Installation Important! The Paragon and all devices you want to attach to it must be unplugged and powered OFF prior to installation. Basic Installation 1. Connect power cord to the Main Switching Unit. Optional Stacking Support: − Connect power cord to a Stacking Unit. − Connect one end of a stacking cabl ...

  • Raritan Computer II - page 16

    6 P ARAGON II U SER M ANUAL 1 3 4 5 6 7 8 2 O p tiona l Figure 3 Installation Diagram ...

  • Raritan Computer II - page 17

    C HAPTER 2: I NSTALLATION 7 Initial Administrative Testing To verify that an attache d server can be vi e wed and co ntrolled th rough the Pa ragon sys tem: 1. When you firs t power ON the Pa ragon Base Unit, an att ached User Station, and the User Station’s attached monitor; a Login Menu will be displayed on the monitor. Type admin (all lowercas ...

  • Raritan Computer II - page 18

    8 P ARAGON II U SER M ANUAL A video-gain ad justment is available to focus th e video image, which can be especially useful if you are using an LCD flat-panel m onitor. T o make this a djustment, act ivate the OS UI (if y ou have not done so already) by rapid ly pressing the keyboard’s [ Scroll Lock ] key twice. Use the [ + ] and [ - ] (plus- and ...

  • Raritan Computer II - page 19

    C HAPTER 2: I NSTALLATION 9 2. Line 2 : User port status m essage: “A/N User (1, 2, 3 … ) → None” User port status displays a scrolling status of all us er ports, one user p ort per second. The User’s active channel, 1 t hrough 256 , is dis played afte r the user port num ber. Raritan Computer Paragon II: Paragon 832/1 Ready A User (1, 2, ...

  • Raritan Computer II - page 20

    10 P ARAGON II U SER M ANUAL 1. Display Ver./ SN (Firmware Version and Serial Number): Di spla ys current version of firmware and unit’s serial number. Firmware: 2C1 SN: CPB80347 Figure 11 Display Ver. and SN 2. Test User UST1 (User Station): Us ed by adm inistrator to check if user stati ons (UST1s) are functionin g properl y. Press the [  ] ...

  • Raritan Computer II - page 21

    C HAPTER 2: I NSTALLATION 11 7. Re-Confi gure : Paragon II will automatically configure the system as computers or devices are added or removed. However, the sy stem administ rator can use this f unction to scan an d re-configure the system manually. When complete, it will return to normal display. Re-Configu re Searching Now… Figure 16 Auto Conf ...

  • Raritan Computer II - page 22

    12 P ARAGON II U SER M ANUAL Initial Configuration Note : This section includes full instructions for ho w to install single Base Units, ca scades of multiple base units, or stacking switches. Follow the simplified procedure previously outlined in Basic Installat ion to install a simple P aragon system with a single Base Unit. See Appendix B: User ...

  • Raritan Computer II - page 23

    C HAPTER 2: I NSTALLATION 13 Installing a Paragon System with a Single Base Unit If installing a single Paragon Base Unit, keep in mi nd the maximum numbers of user stations and server CPUs you can connect: • 2 user stations and 42 CP Us to a P2-UM T242 • 4 user stations and 42 CP Us to a P2-UM T442 • 8 user stations and 32 CP Us to a P2-UM T ...

  • Raritan Computer II - page 24

    14 P ARAGON II U SER M ANUAL 3. Initially configure the User Station. a. The Login Menu shoul d be display ed on th e User Station’s attached monitor. If t he [ Scroll Lock ] LED on the User Station’s attached key board is blinking, the Paragon is ready t o accept hotkey commands, which can be used with the OSUI to logi n, select servers , or a ...

  • Raritan Computer II - page 25

    C HAPTER 2: I NSTALLATION 15 5. Connect a P2CIM-PS2 and its server CPU. a. Connect the cable strands of an appropriate P2 CIM-PS 2 to the desire d ports on a server CPU: i. P2CIM-PS2 (IBM PS/2 c ompatible CPUs): Pl ug the HD15 strand into the CPU’s HD15 VG A video port. Plug the purple 6-pin mini-D IN keyboard strand into the CPU’s 6-pin mini - ...

  • Raritan Computer II - page 26

    16 P ARAGON II U SER M ANUAL c. Th e Channel Configuration menu will appear. Use the up- and down-arrow keys to move the yellow highlight to the Name field for the channel port number where you installed the CPU and press the [ Enter ] key. T he highli ght should t urn light blue. Figure 22 Channel Configuration Menu of a P2-U MT832M d. Edit the na ...

  • Raritan Computer II - page 27

    C HAPTER 2: I NSTALLATION 17 Installing a Cascaded Paragon System Paragon II ’s channel p ort capa city can be e xpanded by instal ling a casca de of B ase Units. In a “tw o-tiered” cascaded system, one or more subsi diary Base Units ar e connected to the chan nel ports of a m aster Base Unit. If you fully populate a second tier, you can add ...

  • Raritan Computer II - page 28

    18 P ARAGON II U SER M ANUAL 6. Configure the channel por ts in your system. (Check the [ Scroll Lock ] LED on one of your user-s tation keyboards. If it is blinking, t he Paragon is ready to accept hotkey c ommands from that user station. Hotkey comm ands can be used wit h the OSUI t o login, sel ect servers, or administ er the system .) a. At the ...

  • Raritan Computer II - page 29

    C HAPTER 2: I NSTALLATION 19 d. The Channel Configur ation menu will app ear. Use the up- and down -arrow keys and [ PageUp ] and [ PageDo wn ] keys to approac h channel ports to wh ich subsidiary Base Units are connected. These will be shown in white with th eir default device names in the Name column and their types in the Device column: “P242? ...

  • Raritan Computer II - page 30

    20 P ARAGON II U SER M ANUAL press the [ Enter ] key, then a channel port for a CPU a ttached to the second-tier Base Unit and press the [ Enter ] key. If you can properly access and oper ate the c hosen CPU, the second-tier Base Unit is properly installed. m. Repeat steps c through l for all remaining (if any) second-tier Base Un its attached to t ...

  • Raritan Computer II - page 31

    C HAPTER 3: O PERATIO N – U SER F UNCTIONS 21 Chapter 3: Operation – User Functions User functions for confi guration an d operation of your Pa ragon II syst em are proces sed thro ugh the On- Screen User Interface ( OSUI). To activate the OSUI at an y time, press the sy stem’s hotkey (the factory default is [ Scroll Lock ]) twice in quick su ...

  • Raritan Computer II - page 32

    22 P ARAGON II U SER M ANUAL 3. The Selection Menu will appear. To view oth er menus, use the function keys as described in th e Help Menu section later in this chapter. Figure 28 Selection Menu for a P2-UMT832M Note : To Log out of the P aragon II system, press the function key [ F9 ] while the OSUI is on-screen. ...

  • Raritan Computer II - page 33

    C HAPTER 3: O PERATIO N – U SER F UNCTIONS 23 Selecting a Server Immediatel y following user lo gin, the Selection Me nu appears. Users who are already logged in can activate the Selecti on Menu by pressin g the hotkey (the factory defaul t is [ Scroll Lock ]) twice in quick succession, then pressing func tion key [ F2 ]. The Selection Menu lists ...

  • Raritan Computer II - page 34

    24 P ARAGON II U SER M ANUAL Figure 30 Selection Menu in order by Name The Selection M enu displa ys up to ei ght channel ports pe r page; t otal num ber of pages appea rs in the upper right-hand corner, for example “ Page 2/5 ” i ndicates that y ou are on the second of f ive pages. Use the [ PageUp ] and [ PageDown ] key s on your key board to ...

  • Raritan Computer II - page 35

    C HAPTER 3: O PERATIO N – U SER F UNCTIONS 25 Once you switch to a differ ent channel port, you can continu e switching by pressing the hotkey (factory default is [ Scroll Lo ck ]) twice rapidly to activate the Selection Menu. If you want to return to your previously sel ected channel port without seei ng any OSUI m enus, press t he “previous c ...

  • Raritan Computer II - page 36

    26 P ARAGON II U SER M ANUAL User Customization When the OSUI is active, inv oke the User Profile Menu by pressing function key [ F4 ]. This menu di splays Paragon II’s configuratio n and all ows you to set preferre d operatin g param eters for indi vidual user accounts. Figure 31 User Profile Menu To view or c hange yo ur user pr ofile: 1. If th ...

  • Raritan Computer II - page 37

    C HAPTER 3: O PERATIO N – U SER F UNCTIONS 27 User Profile Parameters and How to Change Settings • Scan Mode : Indi cates how Para gon II det ermines t he length o f time to pause at each c hannel p ort during aut oscanning . Default setting is “ Global ” – t he system pauses at e ach channel port for the sam e length of time (length of y ...

  • Raritan Computer II - page 38

    28 P ARAGON II U SER M ANUAL You can change, delete, or reinstate your pass word (if “Allo w Blank Password” is set to “ Yes ”) while the User Profile Menu is on -screen by pressing [ P ] . Type your ol d password at t he first prom pt. Type a new password up t o eight charact ers long at the ne xt prompt, an d press the [ Enter ] key. To d ...

  • Raritan Computer II - page 39

    C HAPTER 3: O PERATIO N – U SER F UNCTIONS 29 Keyboard-Controlled OSUI Functions Use the following function keys to access the Paragon’s OSUI functions: P RESS … W HEN YOU WANT TO … [F1] View the Help Menu [F2] Access the Selection Menu in order t o vi ew or select channel ports or view group IDs or scan rat es [F3] Access Power Cont rol Me ...

  • Raritan Computer II - page 40

    30 P ARAGON II U SER M ANUAL Information Menu When the OSUI is open, activate the Information Menu by pressing function key [ F8 ]. This menu displays the “vital statistics” of the User Station that your user station is attach ed to, including its firmware and hardware revisi ons, its serial number, w hich console port (user port) on the Base U ...

  • Raritan Computer II - page 41

    C HAPTER 4: O PERATION – A DMINISTRATOR F UNCTIONS 31 Chapter 4: Operation – Administrator Functions The Administration Menu Administrat ors can use the A dministrat ion Menu to set se curity classes, maintain user names and pri vileges, and manage the system configuration, including co ntrolling use r access to Paragon II and all connected dev ...

  • Raritan Computer II - page 42

    32 P ARAGON II U SER M ANUAL Guidelines for System Configuration • Only one use r shoul d attem pt to modi fy/update t he System Administ ration Me nu at one ti me (especially the User Configuration an d Channel Configuration op tions). • Z-CIMs should be ad ded one at a time to a Z-CIM chain . The Admini strator should read from message banner ...

  • Raritan Computer II - page 43

    C HAPTER 4: O PERATION – A DMINISTRATOR F UNCTIONS 33 zeroes if necessary, type in a two- digit number of minutes from 01 to 99, or use the up- and down- arrow keys to increment and decr ement the current value by 1 respectively. The default setting is 05 . If Logoff Timeout is set to “ Off ,” the number in this field will have no effect. • ...

  • Raritan Computer II - page 44

    34 P ARAGON II U SER M ANUAL User Configuration As administrat or, use the User Co nfiguration M enu to add, delet e, and edit user names and secu rity rights, and to display the current c onnection status for each user. Figure 36 The “left end” of the User Configuration Menu This menu displays one user’s inform ation in each row. T here are ...

  • Raritan Computer II - page 45

    C HAPTER 4: O PERATION – A DMINISTRATOR F UNCTIONS 35 Press the [ Tab ] key or the rig ht-arrow key to move to the “ri ght end” of the m enu and displ ay users’ connection information: The Connectio n column displays which channel po rt (if any) each active user is currently connected to. Figure 37 The “right end” of the U ser Configura ...

  • Raritan Computer II - page 46

    36 P ARAGON II U SER M ANUAL Channel Configuration As administrator, use the Channel Configuration Menu to edit or initializ e a P2CIM-PS2. You can chang e the device name, indi vidual scan rate, device type, and group IDs ass ociated with each server or device. When you save Channe l Configuration changes, Pa ragon II will update each affected P2C ...

  • Raritan Computer II - page 47

    C HAPTER 4: O PERATION – A DMINISTRATOR F UNCTIONS 37 While the cursor is in the Device column, press [ Tab ] or the ri ght-arro w key to move t o the “right e nd” of this menu and display de vices’ grou p inform ation: The Grou p columns displ ay which gr oups (if a ny) the device has been assi gned to. Figure 39 The “right end” of the ...

  • Raritan Computer II - page 48

    38 P ARAGON II U SER M ANUAL User Station Profile As administrator, select Option 4 from the Administration Menu to activate the User Station Profile to set the global key board t ype and vi deo delay . Keyboard Type The Paragon’s OSUI supp orts three types of keyboar d mapping s: Select either “E nglish” – t he default is U.S. English , ? ...

  • Raritan Computer II - page 49

    C HAPTER 4: O PERATION – A DMINISTRATOR F UNCTIONS 39 Group Settings (Access Rights) To assign access rights to use rs and security levels to server CPUs in a Paragon system , assign users to user groups with defined rights a nd CPUs to channel port groups with de fined accessibility. Each group can contain multiple users or CPUs. By default, all ...

  • Raritan Computer II - page 50

    40 P ARAGON II U SER M ANUAL T HESE USER G ROUPS ... ... CAN ACCESS THESE CHANN EL PORT GROUPS : 00 00 through 99 (all CPU s) 0x (01 through 09 ) 00, 0x, and x0 through x9 For example: 01 can access 00, 01, and 10 through 19; 02 can access 00, 02, and 20 through 29, etc. xy (10 th rough 99) 00 , 0x, and xy For example: 10 can access 00, 01, and 10 ...

  • Raritan Computer II - page 51

    C HAPTER 4: O PERATION – A DMINISTRATOR F UNCTIONS 41 Network Settings Configure the Paragon II’s network se ttings from the OSUI by pressing [ F5 ] to activate the Administration Menu. Select option 5, Network Settings to adjust the network settings of t he device. Figure 41 Network Settings Menu • Current IP Address: This field allows admin ...

  • Raritan Computer II - page 52

    42 P ARAGON II U SER M ANUAL Autoscanning and Autoskipping As administrato r, you can press [ F6 ] to turn autoscanni ng on a nd off. Whe n autosc anning is turned on, Paragon II switches sequentially and automatically from one ch annel port to the next, displaying each channel port ’s video for the duration of the user’s global scan rate or t ...

  • Raritan Computer II - page 53

    C HAPTER 4: O PERATION – A DMINISTRATOR F UNCTIONS 43 Power Management An admini strator can co ntrol powe r to connected devi ces directly via t he Paragon II OSUI. To us e the power management features of Paragon II, you will ne ed Raritan’s Remote Power Control Unit in one of three models, d epending on y our needs: − PCR8 – 8 port, 1U r ...

  • Raritan Computer II - page 54

    44 P ARAGON II U SER M ANUAL Controlling Power to an Outlet The addition of a power strip to the Paragon II system allows administrators to cont rol the power to targets in two ways: Controlling power from the Server Selection Menu: Normal Parag on II operatio n involves br owsing the list of devices i n the OSUI and pressing [ Enter ] to switch to ...

  • Raritan Computer II - page 55

    C HAPTER 5: P ARAGON II AND Z-CIM 45 Chapter 5: Paragon II and Z-CIM If you have a l ocal PC CPU that you wa nt only the user(s) at a certain user station t o be able to access, but you want that user station to be able to access the CP Us attached to the Para gon system as well, insert a P2CIM-PS2 dual-access CIM between a User Station and a Base ...

  • Raritan Computer II - page 56

    46 P ARAGON II U SER M ANUAL Connecting Z-CIMs as Tiers The following diagram shows the final setup when connecting Z-Series Z42 00U Z-CIMs as a tier: Figure 42 Connecting a Z-CIM as a Tier to Pa ragon II Important: Z-Series installation requires that each computer be assigned a channel name as it is added to the Z-CIM chain. Computer channels are ...

  • Raritan Computer II - page 57

    C HAPTER 5: P ARAGON II AND Z-CIM 47 c. Place the Z-CIM Terminator in the Z-CIM’s UTP IN port. d. Power ON com puter. e. Optional : Connect a local user cons ole to the UKVMSC Z-CIM. Perform Channel Configuration: 1. At a User St ation Logi n Menu, type admin in the User Name field and press [ Enter ]. 2. Type “raritan” (all lowercase) in the ...

  • Raritan Computer II - page 58

    48 P ARAGON II U SER M ANUAL Attach Z-CIM to Computer to be Added: For UKVMSPD Z-CI M: 1. Connect the 6-pi n mini-DIN keyboard and mouse and H D15 video c onnectors on t he UKVMSP D Z- CIM to computer’s keybo ard, mouse, and video ports. For UKVMSC Z -CIM with loc al port: 1. Connect CCPnn cabl e’s 6-pin m ini-DIN a nd HD15 co nnectors t o comp ...

  • Raritan Computer II - page 59

    C HAPTER 6: IBM X 330 49 Chapter 6: IBM x330 Paragon II unit firmware versions 1P0 (UMT2161) , 2C2 (UMT242, UMT442 , and UMT8), or 3A2 (UMT1664) and User Station (UST1) firmware 4L2 or higher supports an I BM x330 chain of computers as a second tier by utilizing IBM’s Cable Ch aining Technology (C2T) and Raritan Computer Interface Modules (CIMs), ...

  • Raritan Computer II - page 60

    50 P ARAGON II U SER M ANUAL Install an IBM x33 0 Rack of Servers as a Tier to Parago n II: 1. Set up Paragon II followi ng Basic I nstallation i nstructions, but reserve one chan nel port f or each rac k of IBM x33 0 servers t o be connecte d. 2. Connect a Category 5e UTP cab le to the reserved ch annel port on the b ack of the Paragon II un it. 3 ...

  • Raritan Computer II - page 61

    C HAPTER 7: C ONFIGURATIONS 51 Chapter 7: Configurations When implementing co mplex tiered and stacked archit ectures for a Paragon system, there are im portant guidelines describing the le gal and illegal configur ations among de vices in a Pa ragon system, and the procedures to make the sy stem function in t he appropriate manner that you must fo ...

  • Raritan Computer II - page 62

    52 P ARAGON II U SER M ANUAL Tiered Configurations Standard Tiering Configurations Single Base Configuration Definition of Single Base configuration : • Only UMT matrix switches can serve as base units. • The base unit must always be the latest released version, both in hardware and firmware. • A maximum of three (3) tiers, including the base ...

  • Raritan Computer II - page 63

    C HAPTER 7: C ONFIGURATIONS 53 Multiple Base Configuration Definition of Multiple Base configuration: • Two or more UMT Matrix Switches serve as base units. • The base unit must always be the latest released version, both in hardware and firmware. • A maximum of three (3) tiers, including the base unit, is permitted . • Upper-tier devices c ...

  • Raritan Computer II - page 64

    54 P ARAGON II U SER M ANUAL Stacked Configurations Definition of stac king configuration: • The P2-UMT Stacking Swit ch, a new switch device required for stackin g configurati ons, expan ds the number of avai lable chan nel ports in a single switc h. It does n ot add user ports. − UMT Stacking Switch P 2-UMT166 4S has four 68-pin ex pansion p ...

  • Raritan Computer II - page 65

    C HAPTER 7: C ONFIGURATIONS 55 Standard Stacking Configurations Single Base with Stacking Example A: No n-blocked Syst em – P2-UM T1664M Standard configuration – any user can access any channel port i n the system. Figure 46 Stacking - Single Base Configur ation with P2-UMT1664M and P2-U MT1664S Example B: No n-blocked System – P2- UMT832M St ...

  • Raritan Computer II - page 66

    56 P ARAGON II U SER M ANUAL Example D: P2-UMT832M Stacked and Tie red Standard configuration – any user can access any channel port i n the system. Figure 49 Stacking - Single Base Configuration with P2-UMT832M and P2-UMT832 S Example E: Il legal Co nfigurati on Figure 50 Stacking - Single Base Configuration with P2-UMT1664M and P2-UMT832 S Exam ...

  • Raritan Computer II - page 67

    C HAPTER 7: C ONFIGURATIONS 57 Example G: Il legal C onfigura tion Figure 52 Stacking - Single Base Configuration with P2-UMT1664M and P2-UMT832 S Example H: Il legal C onfigura tion Figure 53 Stacking - Single Base Configur ation with P2-UMT832M and P2-U MT1664S P2-UST P2-UMT1664M P2-UMT832S 1A P2-UST P2-UMT832S 1B I/P O/P I/P O/P P2-UST P2-UMT83 ...

  • Raritan Computer II - page 68

    58 P ARAGON II U SER M ANUAL Non-Standard Tier Configuration Guidelines for Existing Firmware Versions • Non-Standard tier confi gurations a re those con figurations supported by Parag on II, but require special procedures in order to funct ion prope rly. These i nclude: − Triangle Configuration − Diamond C onfigurati on − Redundant C onfig ...

  • Raritan Computer II - page 69

    C HAPTER 7: C ONFIGURATIONS 59 Triangle Configuration The following procedure must be followed to ensure this configurati on functions pr operly: − After re-connection, all UMT Matrix Switches must undergo a FUNC reset to clear the switch database. This procedure sh ould be pe rformed sta rting from the third tier device down t o the base unit. ? ...

  • Raritan Computer II - page 70

    60 P ARAGON II U SER M ANUAL Diamond Configuration The following procedure must be followed to ensure this configurati on functions pr operly: − After re-connection, all UMT Matrix Switches shou ld undergo a FUNC reset to clear the switch database. This procedure sh ould be pe rformed sta rting from the third tier device down t o the base unit. ? ...

  • Raritan Computer II - page 71

    C HAPTER 7: C ONFIGURATIONS 61 Redundant Configuration The procedure outlined below mus t be followed to ensure this configurati on functions properl y: − After installation, all UMT Matrix Switches should undergo a FUNC reset to clear th e switch database. This procedure sh ould be pe rformed sta rting from the third tier device down t o the bas ...

  • Raritan Computer II - page 72

    62 P ARAGON II U SER M ANUAL In order to m ake a redundant configur ation system operate more e fficient, the following connection scheme between tiers is recommended: − Assume there are two UMT Base devices, the UMT-Base 1 and UMT-Base2 − Assume there are three UMT second tier devices, t he UMT-2A, UMT-2B, and UMT-2C − Channel conne ction of ...

  • Raritan Computer II - page 73

    A PPENDIX A: S PECIFICATIONS 63 Appendix A: Specifications P ARAGON II U NIT D ESCRIPTION D IMENSIONS W EIGHT P OWER P2-UMT1664M 16 users x 64 server ports, expansion slot, stacking port, network port 11.41” (W) x 17.32” (D ) x 1.75” (H) 290mm (W) x 440m m (D) x 44mm (H) 12.52 lbs 5.68 kg 100V/240V 50/60 Hz 0.6A P2-UMT832M 8 users x 32 server ...

  • Raritan Computer II - page 74

    64 P ARAGON II U SER M ANUAL CAT5 Cable Guidelines Use only strai ght-thro ugh-pinne d four-pair (eight-wire ) Category 5 unshi elded twiste d pair (UTP) ca bles, terminated wit h standa rd RJ-45 pl ugs, for t he CAT5 cabl ing links i n your Para gon system . If your existing CAT5 site-wiring system meets these requirements, fe el free to send the ...

  • Raritan Computer II - page 75

    A PPENDIX B: U SE R S TATION D IRECT M ODE 65 Appendix B: User Station Direct Mode A Paragon User Station set to Direct Mode can be dir ectly connected to a Paragon CIM, either tem porarily for emergency “cras h cart” access or pe rmanently for non-switched extension purposes, withou t having to go through a Base Unit. To make this kind of “D ...

  • Raritan Computer II - page 76

    66 P ARAGON II U SER M ANUAL ...

  • Raritan Computer II - page 77

    A PPENDIX C: C ONFIGURATION AND C OMPATIBILITY 67 Appendix C: Configuration and Compatibility Configuration Matrix As a general rule, the very latest hardware a nd firmware sh ould reside o n the lowest tier Compatibility Matrix Para g on I Para g on II Featur e/Com p onent HW1 HW2/2 Z HW3 HW3M P2CI Ms Yes Ye s Yes Yes C , P , PD CI Ms Yes Yes Ye s ...

  • Raritan Computer II - page 78

    68 P ARAGON II U SER M ANUAL ...

  • Raritan Computer II - page 79

    A PPENDIX D: P ARAGON II R ACK M OUNT 69 Appendix D: Parago n II Rack Mount Paragon II Use r Stations and most Base Uni ts can be mounted i n 1U (1.75", 4 .4 cm) of vert ical space in a standard 19" e quipm ent rack; P2-UMT1 664M Base Unit s can be mounte d in 2U ( 3.5", 8.9 cm ) of space. To rackmount a Base Unit, use the brackets a ...

  • Raritan Computer II - page 80

    70 P ARAGON II U SER M ANUAL Rear Mount 1. Secure the cable-support bar to th e front end of the side brackets, nea r the side brackets’ “ears,” using two of the i ncluded screws. 2. Slide the User Station or Base Unit b etween the side brackets, with its rear panel fa cing the cable- support bar, until its front panel is flush with the back ...

  • Raritan Computer II - page 81

    A PPENDIX E: U SI NG AUATC FOR RS-232 A CCESS 71 Appendix E: Using AU ATC for RS-232 Access Introduction to the AUATC To use your Paragon II system to access a CPU or othe r device through an RS-232 port, attach one of our RS-232 serial CIMs (produ ct code AUA TC) to the device ’s serial port as described in the first section of this Appendi x. T ...

  • Raritan Computer II - page 82

    72 P ARAGON II U SER M ANUAL Operating the AUATC Screen Layout The AUATC produces eight -color vide o at 800 x 600 resolut ion, whic h can accomm odate 32 lines of 80 text characters each. A typical ASCII term inal uses 24 lines, so t he AUATC uses the eight extra lines to provide system-status and help information. These eight lines are divided so ...

  • Raritan Computer II - page 83

    A PPENDIX E: U SI NG AUATC FOR RS-232 A CCESS 73 On-Line Mode When you operate the AUATC in On-Li ne Mode, the m ain screen area displays you r interactions with the ASCII device, as if it we re the screen of an ASCII te rminal. Simu lta neously, the dat a stream bei ng output by the device is stored in an eight-page circ ular bu ffer, so you can n ...

  • Raritan Computer II - page 84

    74 P ARAGON II U SER M ANUAL Buffer Edit Mode The AUATC stores the most recent eigh t pages of data from the attached ASCII device in a circular buffer. After you switch t he AUATC fr om On-Line M ode to Buffe r Edit Mode by pressing [ Alt ] + [ F4 ], you can review the c ontents o f the buffe r by mov ing the cu rsor with t he arrow keys, [ PageUp ...

  • Raritan Computer II - page 85

    A PPENDIX E: U SI NG AUATC FOR RS-232 A CCESS 75 Configuring the AUATC Press [ Alt ] + [ F2 ] to activate the Setup Screen, wher e you can select your desired serial-communica tion parameters (baud rate, etc.) and type of local video output. The initial para meters will always start at their factory defaults, so make sure that the serial port o r d ...

  • Raritan Computer II - page 86

    76 P ARAGON II U SER M ANUAL To program any of your keyb oard’s twelve function key s with comm ands or data i tems you fre quently ha ve to send the device, activate t he Set Up Programmable Keys screen by pressing [ Alt ] + [ F3 ]. Once a strin g (with a maxim um length of s ixteen characte rs) has been assi gned to a key , pressing tha t key w ...

  • Raritan Computer II - page 87

    A PPENDIX E: U SI NG AUATC FOR RS-232 A CCESS 77 Troubleshooting the AUATC If you do not get a device prompt: 1. If the AUATC’s screen is displayed on your monito r with the top and bottom help windows, make sure that it indicates On Line status. If not, press [ Esc ] to return to On-Line Mode. 2. Make sure that the AUATC and the attached de vice ...

  • Raritan Computer II - page 88

    78 P ARAGON II U SER M ANUAL ...

  • Raritan Computer II - page 89

    A PPENDIX F: E MULA TING S UN K EYS W ITH A PS/2 K EYBOARD 79 Appendix F: Emulating Sun Keys with a PS/2 Keyboard We recommend that y ou use a Sun keyboa rd and mouse at your user stat ions if there are any Sun CPUs in your Paragon system. If you must use a PS/2 keyboard to control a Sun CPU attached to your Par agon system, t he Paragon is a ble t ...

  • Raritan Computer II - page 90

    80 P ARAGON II U SER M ANUAL ...

  • Raritan Computer II - page 91

    A PPENDIX G: T ROUBLESHOOTING 81 Appendix G: Troubleshooting S YMPTOM : P ROBABLE C AUSE : No Power. Loose Power Cord. Power switch is off. Paragon II Matrix Switch or User Station (P2-US T) surge protection invoked duri ng a power recycling pr ocess. Power off u nit, wait 20 seconds, then power unit o n. All comput ers have no video displa y. Loos ...

  • Raritan Computer II - page 92

    82 P ARAGON II U SER M ANUAL Multi-Tier Installation In a multi-tier configuration, the order of po wering ON is critical to proper function. • Last tier switches must be powered ON before the intermediate level of tier • Intermedia te tier switches m ust be powered ON befo re the base Paragon II unit can be powered ON. • User Stations (UST1s ...

  • Raritan Computer II - page 93

    A PPENDIX H: FAQ 83 Appendix H: FAQ S UBJECT : Q UESTION : A NSWER : What’s Differ ent between Paragon and Parago n II What is the primary difference between Paragon and Paragon II? Paragon II is the next generati on of KVM switch. While it builds upon the orig inal Paragon technology, i t adds adva nced features incl uding stacking, integrated p ...

  • Raritan Computer II - page 94

    84 P ARAGON II U SER M ANUAL S UBJECT : Q UESTION : A NSWER : Can I restore my saved Paragon Overview files on Para gon II ? Yes, Paragon Manage r can read Paragon Over view files and restore this information into a Paragon II swit ch. Does each uni t have a net work port for firm ware upgrades or just the base? All Paragon II switches h ave a netw ...

  • Raritan Computer II - page 95

    A PPENDIX H: FAQ 85 S UBJECT : Q UESTION : A NSWER : Cabling What UTP cable does Raritan recommend f or use with Para gon II? Paragon II will work with any Cat5, Cat5e, Cat6, or Cat 7 cable. Paragon II use s a very sophisticated circuit to automatically adjust signal to ensure the highest quality video and enhance the use r experience. Further, Par ...

  • Raritan Computer II - page 96

    86 P ARAGON II U SER M ANUAL 255-30-6000 ...

Manufacturer Raritan Computer Category Network Card

Documents that we receive from a manufacturer of a Raritan Computer II can be divided into several groups. They are, among others:
- Raritan Computer technical drawings
- II manuals
- Raritan Computer product data sheets
- information booklets
- or energy labels Raritan Computer II
All of them are important, but the most important information from the point of view of use of the device are in the user manual Raritan Computer II.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Raritan Computer II, service manual, brief instructions and user manuals Raritan Computer II. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Raritan Computer II.

Similar manuals

A complete manual for the device Raritan Computer II, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Raritan Computer II by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Raritan Computer II.

A complete Raritan Computer manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Raritan Computer II - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Raritan Computer II, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Raritan Computer II, that we can find in the current document
3. Tips how to use the basic functions of the device Raritan Computer II - which should help us in our first steps of using Raritan Computer II
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Raritan Computer II
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Raritan Computer II in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Raritan Computer II?

Use the form below

If you did not solve your problem by using a manual Raritan Computer II, ask a question using the form below. If a user had a similar problem with Raritan Computer II it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)