Manual Microplane LUNATEC V2

8 pages 0.17 mb
Download

Go to site of 8

Summary
  • Microplane LUNATEC V2 - page 1

    OWNERS MANUAL LUNATEC V2 MICROPHONE PREAMPLIFIER PO Box 204 Boulder, CO. 80306 voice: 303.443.7454 fax: 303.444.4634 email: info@gracedesign.com Revision A December, 1998 © Copyright 1998, Lunatec LLC ...

  • Microplane LUNATEC V2 - page 2

    2 Thank you for purchasing the Lunatec V2 portable microphone preamplifier. It is designed and built to be extremely reliable and easy to use. This owner's manual includes important setup and operation instructions . Please take the time to familiarize yourself with the se instructions which will help to avoid most common user problems. Grace ...

  • Microplane LUNATEC V2 - page 3

    3 FRONT PANEL CONTROLS GAIN CONTROL Each gain control has 11 positions and adjusts the voltage gain from 10dB to 60dB in 5dB steps. TRIM CONTROL The trim control provides 10dB of continuously variable output attenuation. In the fully clockwise position the trim is at unity (no attenuation). In the fully counter-clockwise position the trim is at - 1 ...

  • Microplane LUNATEC V2 - page 4

    4 CONNECTING THE PREAMPLIFIER AUDIO CONNECTIONS Input connections are made using female XLR connectors. These are wired with pin 2 positive, pin 3 negative and pin 1 ground. 48V phantom power, if used, is supplied on pins 2 and 3. Output connections are made using male XLR connectors or RCA phono jacks. The XLR connectors are wired with pin 2 posit ...

  • Microplane LUNATEC V2 - page 5

    5 OPER ATION SETTING THE GAIN Turn the gain control fully counter-clockwise, turn the trim control fully clockwise and check that the +48V phantom power is off. Connect the microphone to the preamplifier and then turn the phantom power switch on if required. When sending a signal to a tape recorder that has fixed input levels, simply increase the g ...

  • Microplane LUNATEC V2 - page 6

    6 BATTERY CONSIDERATIONS With a standard pair of 48V condenser microphones the V2 draws roughly .48A. In our lab we have tested the V2 with an ECO-CHARGE Beta 6V 7.2A/h battery system. The V2 shuts down automatically after 13+ hours with a pair of Countryman Isomax II microphones. Note that this represents a complete discharge of a new and complete ...

  • Microplane LUNATEC V2 - page 7

    7 Figure 3. Circuit Board Jumper Locations SN #V054 and below Figure 4. Circuit Board Jumper Locations SN #V055 and above ...

  • Microplane LUNATEC V2 - page 8

    8 SPECIFIC ATIONS EIN @ 60dB gain < 130dB FREQUENCY RESPONSE +/- 3dB @ 60dB gain: 6Hz-250kHz THD+N + 20dBu out @ 20dB gain 0.0011% + 20dBu out @ 40dB gain 0.0011% + 20dBu out @ 60dB gain 0.0046% INTERMODULATION DISTORTION @ 40dB gain + 25dBu out < .0025% NOISE - REFERRED TO INPUT @ 60dB gain 50 Ohm source <- 130dB PHASE DEVIATION 50- 20Khz ...

Manufacturer Microplane Category Stereo Amplifier

Documents that we receive from a manufacturer of a Microplane LUNATEC V2 can be divided into several groups. They are, among others:
- Microplane technical drawings
- LUNATEC V2 manuals
- Microplane product data sheets
- information booklets
- or energy labels Microplane LUNATEC V2
All of them are important, but the most important information from the point of view of use of the device are in the user manual Microplane LUNATEC V2.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Microplane LUNATEC V2, service manual, brief instructions and user manuals Microplane LUNATEC V2. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Microplane LUNATEC V2.

Similar manuals

A complete manual for the device Microplane LUNATEC V2, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Microplane LUNATEC V2 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Microplane LUNATEC V2.

A complete Microplane manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Microplane LUNATEC V2 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Microplane LUNATEC V2, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Microplane LUNATEC V2, that we can find in the current document
3. Tips how to use the basic functions of the device Microplane LUNATEC V2 - which should help us in our first steps of using Microplane LUNATEC V2
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Microplane LUNATEC V2
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Microplane LUNATEC V2 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Microplane LUNATEC V2?

Use the form below

If you did not solve your problem by using a manual Microplane LUNATEC V2, ask a question using the form below. If a user had a similar problem with Microplane LUNATEC V2 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)