English dropdown-ico

Manual Lava Computer MOKO L75.2

24 pages 0.36 mb
Download

Go to site of 24

Summary
  • Lava Computer MOKO L75.2 - page 1

    La v aP ort-Quad Installation Manual Rev . B00 LAV A COMPUTERS QUAD SERIAL PCI P.N. MOKO L75.2 MADE IN CANADA PNMOKO S-1 MADEIN JAPAN 0255351 ...

  • Lava Computer MOKO L75.2 - page 2

    2 Congratulations on y our purchase of the LavaP ort-Quad Com Port Accelerat or for 56K and ISDN external modems and other high-speed serial peripherals. Included with your package, you should hav e the following: 1. The Lav aPort-Quad printed circuit board 2. One software installation diskette 3. This user’ s manual If any of the above it ems ar ...

  • Lava Computer MOKO L75.2 - page 3

    3 C ontents Quick Install Installing the LavaP ort-Quad Hardware Windows Installation · Changing Port Numbers (Com 3/4/5 etc.) · Setting LavaP ort Data R ates · Setting LavaP ort FIFO Control · Flow C ontrol · Lava Modem Speed Set - f or 230.4 kbps Windows NT 4.0 Installation · High Speed Data Rates · Windows Driver Installation · Nt4 Drive ...

  • Lava Computer MOKO L75.2 - page 4

    4 Quick Install Windo ws95/98 1. With the power off , insert the LavaP or t-Quad card into any fr ee PCI slot. 2. Launch Windows - new hardware will be f ound. 3. When prompted , inser t the LavaP ort-Quad installation diskette and select the file “Lav a.inf ” in either the root or the Win95 subdirec tory . (If the diskette is not found you may ...

  • Lava Computer MOKO L75.2 - page 5

    5 Hardwar e Installation 1. Before opening the casing of y our computer , make sure that all power is off . 2. Locate an unused PCI slot and insert the LavaP ort-Quad into it. Ensure that it is well seated . 3. Screw the metal backplane of the LavaP ort-Quad board to your PC’ s casing and replace the machine ’ s c over . 4. Connect your modem c ...

  • Lava Computer MOKO L75.2 - page 6

    6 Windo ws Driver Installa tion Windo ws Installation Note: Make sure that you are installing the correct Lav aPort-Quad drivers for the appr opriate operating system. DO NO T install NT or Windo ws 3.x drivers under other versions of Windows 1. With the power turned off , insert the LavaP or t-Quad card into any free PCI slot in your PC. Make sure ...

  • Lava Computer MOKO L75.2 - page 7

    7 4. The Lav aPort-Quad hardware appears in Device Manager in two places: under the Multi-function Adapters tree and as part of the Ports tree. Please note that an y changes to the Resources (I/O Address & IRQ) used by an y one of the four ports on the Lava Quattro-PCI must be made through the Resources page of the appropriate Lav aPort-Quad P ...

  • Lava Computer MOKO L75.2 - page 8

    8 5. Click on Ports and select one of the por ts listed under the heading LavaP ort PCI. 6. Click Properties. The following screen will appear: ...

  • Lava Computer MOKO L75.2 - page 9

    9 7. Click the Resources tab . A screen similar to the f ollowing will appear: Note: Do not be alarmed if Windo ws reports an I/O Range or IRQ conflict between the LavaP ort-Quad and some other device in your PC. The Lav aPort-Quad is a fully compliant PCI device , and therefore allows for the sharing of IRQ and I/O Resouces between devices . ...

  • Lava Computer MOKO L75.2 - page 10

    10 The Lav aPort-Quad hardware appears in Device Manager in two places: under the Multi-function Adapters tree and as part of the Ports tree. Please note that the Resources (I/O A ddress & IRQ) used by the LavaP ort-Quad can only be modified through the LavaP ort Parent device - listed under Multi-function Adapters. If you wish to change the Co ...

  • Lava Computer MOKO L75.2 - page 11

    11 Unless you already ha ve more than 4 Com P orts installed in your PC, Windows will by default configure the La vaP ort-Quad por ts as Com5 through Com8. If you wish to change the C om number of any one of these ports (e.g. Assign P or t A to be Com 3), please use the Lav a Com Port Redirector Utility included in the “Utils“ subdirectory of y ...

  • Lava Computer MOKO L75.2 - page 12

    12 ...

  • Lava Computer MOKO L75.2 - page 13

    13 The data rate of the La vaP or t may be set using the Bits per Second pull down menu. Please note that this menu will also appear when setting the “P ort Properties” in any communications application, and may have to be set independently of your Contr ol Panel settings. Contr ol Panel settings may not necessarily be linked to those of your C ...

  • Lava Computer MOKO L75.2 - page 14

    14 ...

  • Lava Computer MOKO L75.2 - page 15

    15 Setting Lav aP or t FIFO C ontrol in W indows ...

  • Lava Computer MOKO L75.2 - page 16

    16 Each of the LavaP ort-Quad’ s four ports incorporates a 64-b yte FIFO (first- in-first-out) buffer . The FIFO control tabs set the buff er “trigger” levels. When the buffer is filled to its trigger level with the selected number of bytes , the CPU will be interrupted and asked to either reload the buff er (for transmission), or retrieve da ...

  • Lava Computer MOKO L75.2 - page 17

    17 Flow C ontrol refers to the type of signaling that is used between the modem and the LavaP ort. If you are connecting the Lav aPort to a modem or ISDN terminal adapter , use the default setting of Hardware (RTS/CTS) flo w control. Software Flow Contr ol (Xon/Xoff ) is used only f or connecting the LavaP ort to a non-modem serial device (e.g . Us ...

  • Lava Computer MOKO L75.2 - page 18

    18 ...

  • Lava Computer MOKO L75.2 - page 19

    The Lav aPort-Quad suppor ts data rates up to 460.8 kbps, including 115.2 kbps and 230.4 k bps. However , not all modems suppor t Com P or t rates abov e 115.2 kbps. If your modem does not support higher data rates and you select a higher data rate in the La vaPort Properties, Windows will automatically default to the slowest supported rate in the ...

  • Lava Computer MOKO L75.2 - page 20

    20 ...

  • Lava Computer MOKO L75.2 - page 21

    Windo ws NT 4.0 Installation Windo ws NT Driver Installa tion 1. Once the Lav aPort-Quad is installed in your PC, turn on your computer and start NT . 2. Place the Lav aPort-Quad installation diskette into your floppy drive and select Run from the Star t Menu. When prompted type: A:NT4.0Setup. 3. After the necessary files have been copied , selec ...

  • Lava Computer MOKO L75.2 - page 22

    22 Please note that Com 1 ma y not appear in this applet if you have y our mouse attached to Com 1. ...

  • Lava Computer MOKO L75.2 - page 23

    23 The Lav aPort-Quad suppor ts data rates up to 460.8 kbps, including 115.2 kbps and 230.4 k bps. However , not all modems suppor t Com P or t rates abov e 115.2 kbps. If your modem does not support higher data rates and you select a higher data rate in the La vaPort-Quad Properties, Windows will automatically default to the slowest supported rate ...

  • Lava Computer MOKO L75.2 - page 24

    La va C omputer MFG Inc. La va T echnical Suppor t 9:00 am to 5:30 pm Monday t o Frida y (Eastern Time) T el: +416 674-5942 F ax: + 416 674-8262 E-mail: tech@lav alink.com Internet: www .la valink.com This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) T his device may not cause harmful interfer ...

Manufacturer Lava Computer Category Computer Hardware

Documents that we receive from a manufacturer of a Lava Computer MOKO L75.2 can be divided into several groups. They are, among others:
- Lava Computer technical drawings
- MOKO L75.2 manuals
- Lava Computer product data sheets
- information booklets
- or energy labels Lava Computer MOKO L75.2
All of them are important, but the most important information from the point of view of use of the device are in the user manual Lava Computer MOKO L75.2.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Lava Computer MOKO L75.2, service manual, brief instructions and user manuals Lava Computer MOKO L75.2. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Lava Computer MOKO L75.2.

Similar manuals

A complete manual for the device Lava Computer MOKO L75.2, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Lava Computer MOKO L75.2 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Lava Computer MOKO L75.2.

A complete Lava Computer manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Lava Computer MOKO L75.2 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Lava Computer MOKO L75.2, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Lava Computer MOKO L75.2, that we can find in the current document
3. Tips how to use the basic functions of the device Lava Computer MOKO L75.2 - which should help us in our first steps of using Lava Computer MOKO L75.2
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Lava Computer MOKO L75.2
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Lava Computer MOKO L75.2 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Lava Computer MOKO L75.2?

Use the form below

If you did not solve your problem by using a manual Lava Computer MOKO L75.2, ask a question using the form below. If a user had a similar problem with Lava Computer MOKO L75.2 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)