English dropdown-ico

Manual LSI ITI7004G2-

80 pages 0.39 mb
Download

Go to site of 80

Summary
  • LSI ITI7004G2- - page 1

    ® DB15-000182-01 2 Gbit/s Fibre Channel to PCI Host Adapters USER’S GUIDE Marc h 2002 V ersion 2.0 ...

  • LSI ITI7004G2- - page 2

    ii V er . 2.0 Copyright © 2002 by LSI Logic Corporation. All rights reserved. Electroma gnetic Compatibility Notices This device complies with P art 15 of the FCC Rules. Operation is subject to the follo wing two conditions: 1. This device ma y not cause harmful interference , and 2. This device m ust accept any interf erence received, including i ...

  • LSI ITI7004G2- - page 3

    iii V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. This document contains proprietar y information of LSI Logic Cor poration. The inf or mation contained herein is not to be used by or disclosed to third par ties without the e xpress written per mission of an officer of LSI Logic Cor poration. LSI Logic products are n ...

  • LSI ITI7004G2- - page 4

    iv V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. Document DB15-000182-01, Second Edition (March 2002) This document describes LSI Logic Cor poration’ s f amily of 2 Gbit/s Fibre Channel to PCI Host Adapter boards and will remain the official reference source f or all re visions/releases of these products until resc ...

  • LSI ITI7004G2- - page 5

    Pref ace v V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. Preface This book is the primar y reference and user’ s guide for the LSI Logic f amily of 2 Gbit/s Fibre Channel to PCI Host Adapter boards. It contains a complete functional description for each of these boards as well as complete ph ysical and electrical sp ...

  • LSI ITI7004G2- - page 6

    vi Pref ace V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. Related Publications LSIFC929 Dual Channel Fibre Channel I/O Processor T echnical Man ual, A ugust 2001 (LSI Order # S14073) LSIFC919 Single Channel Fibre Channel I/O Processor T echnical Manual, October 2001 (LSI Order # DB15-000151-01) Fusion-MPT™ De vice M ...

  • LSI ITI7004G2- - page 7

    2 Gbit/s Fibre Channel to PCI Host Adapters vii Rev . 2.0 Copyright © 2002 by LSI Logic Corporation. All rights reserved. Contents Chapter 1 Installing the 2 Gbit/s Host Adapters 1.1 General Description 1-1 1.2 Obtaining Windows NT/Windo ws 2000 Drivers 1-2 1.3 Quick Host Adapter Installation Procedure 1-2 1.4 Detailed Installation Procedure 1-3 1 ...

  • LSI ITI7004G2- - page 8

    viii Contents Rev . 2.0 Copyright © 2002 by LSI Logic Corporation. All rights reserved. 2.6.3 LSI40919LO Host Adapter Configuration 2-10 2.6.4 LSI40919LO Connector and Indicator LED 2-11 2.6.5 LSI40919H Host Adapter Configuration 2-12 2.6.6 LSI40919H Connector 2-13 2.6.7 LSI40919LH Host Adapter Configuration 2-14 2.6.8 LSI40919LH Connector 2-15 ...

  • LSI ITI7004G2- - page 9

    Contents ix Rev . 2.0 Copyright © 2002 by LSI Logic Corporation. All rights reserved. 4.3 Star ting the Intel BIOS Configuration Utility 4-3 4.4 Using the Intel BIOS Configuration Utility 4-3 4.5 Main Menu 4-3 4.5.1 Adapter Proper ties Menu 4-4 4.5.2 P ersistent IDs Menu 4-4 4.5.3 De vice Proper ties Menu 4-5 4.5.4 Boot Adapter List Menu 4-5 4.5 ...

  • LSI ITI7004G2- - page 10

    x Contents Rev . 2.0 Copyright © 2002 by LSI Logic Corporation. All rights reserved. 2.10 LSI44929O Connectors and Indicator LEDs 2-17 2.11 LSI44929LO Host Adapter Configuration 2-18 2.12 LSI44929LO Connectors and Indicator LEDs 2-19 2.13 LSI44929H Host Adapter Configuration 2-20 2.14 LSI44929H Connectors 2-21 2.15 LSI44929LH Host Adapter Confi ...

  • LSI ITI7004G2- - page 11

    2 Gbit/s Fibre Channel to PCI Host Adapters 1-1 Rev . 2.0 Copyright © 2002 by LSI Logic Corporation. All rights reserved. Chapter 1 Installing the 2 Gbit/s Host Adapter s This chapter contains general inf ormation about the LSI Logic family of 2 Gbit/s Fibre Channel (FC) to PCI host adapters. It also pro vides host adapter installation instruction ...

  • LSI ITI7004G2- - page 12

    1-2 Installing the 2 Gbit/s Host Adapters Rev . 2.0 Copyright © 2002 by LSI Logic Corporation. All rights reserved. to PCI boards in PCI computer systems with either a standard or Low Profile PCI (LPPCI) brac ket type . 1.2 Obtaining Windows NT/Windo ws 2000 Drivers Bef ore you begin the 2 Gbit/s Fibre Channel to PCI host adapter installation, cr ...

  • LSI ITI7004G2- - page 13

    Detailed Installation Procedure 1-3 Rev . 2.0 Copyright © 2002 by LSI Logic Corporation. All rights reserved. Figure 1.1 illustrates an e xample of this host adapter board. Also ref er to Chapter 2 to see more detailed drawings of the 2 Gbit/s host adapter boards. Step 3. Switch off the computer and unplug power cords f or all components in your s ...

  • LSI ITI7004G2- - page 14

    1-4 Installing the 2 Gbit/s Host Adapters Rev . 2.0 Copyright © 2002 by LSI Logic Corporation. All rights reserved. Step 2. Remov e the host adapter from the packaging and chec k that it is not damaged. Figure 1.1 illustrates an e xample of this host adapter board. Also ref er to Chapter 2 to see more detailed drawings of the 2 Gbit/s host adapter ...

  • LSI ITI7004G2- - page 15

    Detailed Installation Procedure 1-5 Rev . 2.0 Copyright © 2002 by LSI Logic Corporation. All rights reserved. Figure 1.1 Hard ware Connections for the LSI Logic Host Adapter Step 7. Carefully inser t edge connector J1 (see Figure 1.1 ) of the host adapter into the PCI slot. Make sure the edge connector is properly aligned bef ore pressing the boar ...

  • LSI ITI7004G2- - page 16

    1-6 Installing the 2 Gbit/s Host Adapters Rev . 2.0 Copyright © 2002 by LSI Logic Corporation. All rights reserved. Figure 1.2 Inserting the Host Adapter Step 8. Secure the board with the brac ket scre w (see Figure 1.2 ) bef ore making the e xter nal FC link connection. Step 9. Reconnect all power cords and boot y our PC. Brack et Screw 32-bit PC ...

  • LSI ITI7004G2- - page 17

    2 Gbit/s Fibre Channel to PCI Host Adapters 2-1 V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. Chapter 2 2 Gbit/s Host Adapter Characteristics This chapter provides specific details about the ph ysical environment associated with the LSI Logic 2 Gbit/s Fibre Channel to PCI host adapters. This chapter includes these to ...

  • LSI ITI7004G2- - page 18

    2-2 2 Gbit/s Host Adapter Character istics V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. T able 2.1 lists the 2 Gbit/s Fibre Channel to PCI host adapters discussed in this user’ s guide. 2.1.1 Hard ware and Software Support The LSI Logic 2 Gbit/s Fibre Channel to PCI host adapter f amily suppor ts most major softwar ...

  • LSI ITI7004G2- - page 19

    F eatures 2-3 V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. Bef ore you use an y of this family of host adapters , make sure y our system meets the specific hardware and softw are requirements shown in T able 2.2. 2.2 Features This section provides an o verview of the PCI Interf ace and the FC Interf ace for the 2 Gb ...

  • LSI ITI7004G2- - page 20

    2-4 2 Gbit/s Host Adapter Character istics V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. – Complies with PCI Local Bus Specification, Re v . 2.2 – 3.3 V interf ace (5.0 V tolerant) • Serial EEPROM configuration storage • Card edge keyed a s a universal add-in card 2.2.2 FC Interface The LSIFC919/LSIFC929 con ...

  • LSI ITI7004G2- - page 21

    Ph ysical Environment 2-5 V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. 2.3.1 Electrical Characteristics T able 2.3 lists the maximum po wer requirements, and includes all of the LSI Logic 2 Gbit/s Fibre Channel to PCI host adapter boards, under nor mal operation. 2.3.2 Thermal, Atmospheric Characteristics The ther ma ...

  • LSI ITI7004G2- - page 22

    2-6 2 Gbit/s Host Adapter Character istics V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. 2.3.3 Electroma gnetic Compliance These boards are designed and implemented to minimize electromagnetic emissions, susceptibility , and the effects of electromagnetic discharge. The boards are tested to comply with Class B and car ...

  • LSI ITI7004G2- - page 23

    IEEE Unique Address 2-7 V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. 2.4.2 The FC Interface The FC interf ace varies, depending on which specific LSI Logic 2 Gbit/s host adapter you ha v e selected. See Section 2.6 for more inf or mation. 2.4.3 The FC Link Activity/Link Fault LED The LSI Logic 2 Gbit/s optical host ...

  • LSI ITI7004G2- - page 24

    2-8 2 Gbit/s Host Adapter Character istics V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. 2.6.1 LSI40919O Host Adapter Configuration The LSI Logic LSI40919O is a single-channel 2 Gbit/s Fibre Channel adapter . One LC optical connector is used for I/O , which is accessible through the module brac ket. The LSI40919O use ...

  • LSI ITI7004G2- - page 25

    Ph ysical Characteristics 2-9 V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. 2.6.2 LSI40919O Connector and Indicator LED The LSI40919O I/O brac ket is configured as sho wn in Figure 2.2 . One LC connector is used to connect the adapter channel to the Fibre Channel subsystem. The indicator LED is used to indicate link ...

  • LSI ITI7004G2- - page 26

    2-10 2 Gbit/s Host Adapter Characteristics V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. 2.6.3 LSI40919LO Host Adapter Configuration The LSI Logic LSI40919LO is a single-channel 2 Gbit/s Fibre Channel adapter . One LC optical connector is used for I/O , which is accessible through the module brac ket. The LSI40919LO ...

  • LSI ITI7004G2- - page 27

    Ph ysical Characteristics 2-11 V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. 2.6.4 LSI40919LO Connector and Indicator LED The LSI40919LO I/O brac ket is configured as sho wn in Figure 2.4 . One LC connector is used to connect the adapter channel to the Fibre Channel subsystem. The indicator LED is used to indicate li ...

  • LSI ITI7004G2- - page 28

    2-12 2 Gbit/s Host Adapter Characteristics V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. 2.6.5 LSI40919H Host Adapter Configuration The LSI Logic LSI40919H is a single-channel 2 Gbit/s Fibre Channel adapter . One HSSDC connector is used for I/O , which is accessible through the module brac ket. The LSI40919H uses one ...

  • LSI ITI7004G2- - page 29

    Ph ysical Characteristics 2-13 V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. 2.6.6 LSI40919H Connector The LSI40919H I/O brac ket is configured as sho wn in Figure 2.6 . One HSSDC connector is used to connect the adapter channel to the Fibre Channel subsystem. Figure 2.6 LSI40919H Connector Channel 0 ...

  • LSI ITI7004G2- - page 30

    2-14 2 Gbit/s Host Adapter Characteristics V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. 2.6.7 LSI40919LH Host Adapter Configuration The LSI Logic LSI40919LH is a single-channel 2 Gbit/s Fibre Channel adapter . One HSSDC connector is used for I/O , which is accessible through the module brac ket. The LSI40919LH uses ...

  • LSI ITI7004G2- - page 31

    Ph ysical Characteristics 2-15 V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. 2.6.8 LSI40919LH Connector The LSI40919LH I/O brac ket is configured as sho wn in Figure 2.8 . One HSSDC connector is used to connect the adapter channel to the Fibre Channel subsystem. Figure 2.8 LSI40919LH Connector Channel 0 ...

  • LSI ITI7004G2- - page 32

    2-16 2 Gbit/s Host Adapter Characteristics V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. 2.6.9 LSI44929O Host Adapter Configuration The LSI Logic LSI44929O is a dual-channel 2 Gbit/s Fibre Channel adapter . T wo LC optical connectors are used f or I/O, which are accessible through the module br ack et. The LSI44929O ...

  • LSI ITI7004G2- - page 33

    Ph ysical Characteristics 2-17 V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. 2.6.10 LSI44929O Connector and Indicator LED The LSI44929O I/O brac ket is configured as sho wn in Figure 2.10 .T w o LC connectors are used to connect the adapter channel to the Fibre Channel subsystem. The indicator LEDs are used to indica ...

  • LSI ITI7004G2- - page 34

    2-18 2 Gbit/s Host Adapter Characteristics V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. 2.6.11 LSI44929LO Host Adapter Configuration The LSI Logic LSI44929LO is a dual-channel 2 Gbit/s Fibre Channel adapter . T wo LC optical connectors are used f or I/O, which are accessible through the module br ack et. The LSI4492 ...

  • LSI ITI7004G2- - page 35

    Ph ysical Characteristics 2-19 V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. 2.6.12 LSI44929LO Connector and Indicator LED The LSI44929LO I/O brac ket is configured as sho wn in Figure 2.12 .T w o LC connectors are used to connect the adapter channel to the Fibre Channel subsystem. The indicator LEDs are used to indi ...

  • LSI ITI7004G2- - page 36

    2-20 2 Gbit/s Host Adapter Characteristics V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. 2.6.13 LSI44929H Host Adapter Configuration The LSI Logic LSI44929H is a dual-channel 2 Gbit/s Fibre Channel adapter . T wo HSSDC connectors are used f or I/O, which are accessib le through the module brac ket. The LSI44929H uses ...

  • LSI ITI7004G2- - page 37

    Ph ysical Characteristics 2-21 V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. 2.6.14 LSI44929H Connectors The LSI44929H I/O brac ket is configured as sho wn in Figure 2.14 .T w o HSSDC connectors are used to connect the adapter channel to the Fibre Channel subsystem. Figure 2.14 LSI44929H Connectors Channel 0 Channel ...

  • LSI ITI7004G2- - page 38

    2-22 2 Gbit/s Host Adapter Characteristics V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. 2.6.15 LSI44929LH Host Adapter Configuration The LSI Logic LSI44929LH is a dual-channel 2 Gbit/s Fibre Channel adapter . T wo HSSDC connectors are used f or I/O, which are accessib le through the module brac ket. The LSI44929LH u ...

  • LSI ITI7004G2- - page 39

    Ph ysical Characteristics 2-23 V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. 2.6.16 LSI44929LH Connectors The LSI44929LH I/O brac ket is configured as sho wn in Figure 2.16 .T w o HSSDC connectors are used to connect the adapter channel to the Fibre Channel subsystem. Figure 2.16 LSI44929LH Connectors Channel 0 Chann ...

  • LSI ITI7004G2- - page 40

    2-24 2 Gbit/s Host Adapter Characteristics V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. 2.6.17 ITI7004G2-LC Host Adapter Configuration The LSI Logic ITI7004G2-LC is a quad-channel 2 Gbit/s Fibre Channel adapter . Four LC optical connectors are used f or I/O , which are accessible through the module br ack et. The IT ...

  • LSI ITI7004G2- - page 41

    Ph ysical Characteristics 2-25 V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. 2.6.18 ITI7004G2-LC Connector and Indicator LED The ITI7004G2-LC I/O brac ket is configured as sho wn in Figure 2.18 . F our LC connectors are used to connect the adapter channel to the Fibre Channel subsystem. The indicator LEDs are used to ...

  • LSI ITI7004G2- - page 42

    2-26 2 Gbit/s Host Adapter Characteristics V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. ...

  • LSI ITI7004G2- - page 43

    2 Gbit/s Fibre Channel to PCI Host Adapters 3-1 V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. Chapter 3 Firmware Installation Pr ocedure This chapter provides inf or mation about installing and configur ing Fibre Channel fir mware and includes these topics: • Section 3.1, “Introduction, ” page 3-1 • Section ...

  • LSI ITI7004G2- - page 44

    3-2 Fir mware Installation Procedure V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. 3.2.1 Features The Fibre Channel firmware for the LSI Logic Fibre Channel chips suppor ts these features: • 1 Gbit/s and 2 Gbit/s Fibre Channel transf ers, with A uto Negotiation (user selects 1 Gbit/s, 2 Gbit/s , or Auto) • 32-bit ...

  • LSI ITI7004G2- - page 45

    Installing the Firmware 3-3 V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. manages all link e xceptions, which serves to isolate the host driver from Fibre Channel unique e xceptions. With the Fusion-MPT architecture, parallel SCSI host drivers can be used with the LSI Logic Fibre Channel controllers with little or no ...

  • LSI ITI7004G2- - page 46

    3-4 Fir mware Installation Procedure V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. 3.4 Configuring the Firmware The LSI Logic fir mware suppor ts se ver al configuration options, defined individually below . All options may be configured using the FCUTIL utility menu, as described in Section 3.3.1, “Installing ...

  • LSI ITI7004G2- - page 47

    Configuring the Fir mware 3-5 V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. k - Change Port 1 Board Speed to Auto Step 3. Exit the FCUTIL utility using the menu option q - Quit . 3.4.2 Interrupt Coalescing These host adapters hav e the ability to complete multiple I/O requests per host interrupt. This ability may be ...

  • LSI ITI7004G2- - page 48

    3-6 Fir mware Installation Procedure V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. The Coalescing Timeout value determines how long the host adapter waits bef ore generating an interr upt, when less than Coalescing Depth I/O requests are present. By def ault, the host adapter is pre-programmed with a v alue of 0x500 ? ...

  • LSI ITI7004G2- - page 49

    T roub leshooting 3-7 V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. 3.5 T roubleshooting Some potential problems and their suggested solutions are: The Firmware and BIOS revisions typicall y need to be in sync for proper operation. Check with LSI Logic T echnical Suppor t to make sure that the Firmware is the correct ...

  • LSI ITI7004G2- - page 50

    3-8 Fir mware Installation Procedure V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. ...

  • LSI ITI7004G2- - page 51

    2 Gbit/s Fibre Channel to PCI Host Adapters 4-1 V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. Chapter 4 BIOS Features This chapter describes the Fibre Channel BIOS and Configuration Utility and includes these topics: • Section 4.1, “Introduction, ” page 4-1 • Section 4.2, “Intel BIOS, ” page 4-2 • Secti ...

  • LSI ITI7004G2- - page 52

    4-2 BIOS Features V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. 4.2 Intel BIOS This section provides the f eatures, description, and installation of the Intel Fibre Channel BIOS. 4.2.1 Intel BIOS Features The LSI Logic FC Intel BIOS suppor ts: • Selection and Configuration f or up to 256 adapters • Boot de vice s ...

  • LSI ITI7004G2- - page 53

    Star ting the Intel BIOS Configuration Utility 4-3 V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. 4.3 Star ting the Intel BIOS Configuration Utility The LSI Logic Intel BIOS allows y ou to change the def ault configuration of your host adapters , using the embedded BIOS Configuration Utility . When the BIOS loads, ...

  • LSI ITI7004G2- - page 54

    4-4 BIOS Features V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. attached de vices). After selecting an adapter and pressing Enter , the FC Link bus is scanned and the Adapter Properties screen appears. On the Main menu, two selections are the Boot Adapter List and Global Proper ties menus. Boot Adapter List allows sel ...

  • LSI ITI7004G2- - page 55

    Main Menu 4-5 V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. Ne xt P age and Pre vious P age options are provided on the persistent ID screens, through the F2 k ey , which moves the screen f orward or back b y 16 entries. Howe ver , the CU requires that any modifications to the current page be stored bef ore new entri ...

  • LSI ITI7004G2- - page 56

    4-6 BIOS Features V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. 4.5.5 Global Properties Menu The Global Proper ties menu allows y ou to pause if an aler t message has been displa yed, to vie w displa y boot information, and to set displa y and video modes. 4.6 Exiting the Intel BIOS Configuration Utility The Exit men ...

  • LSI ITI7004G2- - page 57

    Open Boot BIOS 4-7 V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. These messages ma y appear during the boot process: • Adapter removed from boot order, parameters will be updated accordingly! appears when an adapter is remov ed from the system or is relocated behind a PCI bridge. This message is for inf or mation on ...

  • LSI ITI7004G2- - page 58

    4-8 BIOS Features V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. 4.8.2 Identifying the Fibre Channel Disks The probe-scsi-all command is used to identify the Fibre Channel de vices on your Fusion-MPT adapter . T o show all disks av ailable from the openboot prompt, use the probe- scsi-all command. Note that this comman ...

  • LSI ITI7004G2- - page 59

    Open Boot BIOS 4-9 V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. Target 6 Unit 0 Removable Read Only device PLEXTOR CD-ROM PX-20TS If the Fibre Channel de vices on your LSI Logic/IntraServer adapter are not identified by y our system, check the f ollowing: • Is the Fibre Channel enclosure powered ON? • Does the L ...

  • LSI ITI7004G2- - page 60

    4-10 BIOS F eatures V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. /pci@8,700000/IntraServer,fc@2/disk /pci@8,700000/IntraServer,fc@2/tape /pci@8,700000/IntraServer,fc@1,1/disk /pci@8,700000/IntraServer,fc@1,1/tape /pci@8,700000/IntraServer,fc@1/disk /pci@8,700000/IntraServer,fc@1/tape /pci@8,700000/scsi@6,1/tape /pci@ ...

  • LSI ITI7004G2- - page 61

    Open Boot BIOS 4-11 V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. 4.8.4.1 select Use the select openboot command to select the adapter entr y . This opens the por t to br ing the por t online. ok select /pci@8,700000/IntraServer,fc@1 4.8.4.2 .properties Use . properties to show the adapter proper ties. ok .properties ...

  • LSI ITI7004G2- - page 62

    4-12 BIOS F eatures V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. 4.8.4.3 show-children While you ha v e the adapter or por t selected, to display the de vices currently connected to this adapter , use the show-children command, as shown belo w . First, select the por t or adapter shown (use the por t name your system ...

  • LSI ITI7004G2- - page 63

    Open Boot BIOS 4-13 V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. timeout of 1280 (0x500) microseconds. What this means is that the host is interrupted only once for 9 I/Os processed b y the chip , unless 1280 microseconds has passed since the host was last interrupted. Although LSI Logic has determined that these set ...

  • LSI ITI7004G2- - page 64

    4-14 BIOS F eatures V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. Select the por t or adapter shown (use the port name your system assigns) : ok select /pci@8,700000/IntraServer,fc@1 Then enter commands as shown in the f ollowing example: ok show-link-speed Link speed selected is 1 Gbaud Current link speed is 1 Gbaud ...

  • LSI ITI7004G2- - page 65

    Open Boot BIOS 4-15 V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. d) /pci@1f,0/pci@1,1/ide@3/disk e) /pci@1f,0/pci@1,1/ebus@1/fdthree@14,3203f0 q) NO SELECTION Enter Selection, q to quit: a /pci@1f,0/pci@1/IntraServer,fc@2/disk has been selected. Type ^Y ( Control-Y ) to insert it in the command line. e.g. ok nvalias ...

  • LSI ITI7004G2- - page 66

    4-16 BIOS F eatures V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. change from auto detect of topology , and that firmware version 1.00.03 is the minimum re vision to suppor t this functionality . The f ollowing is an e xample of how to select a man ual topology N_P or t or NL_P or t on a selected Fibre Channel por t. ...

  • LSI ITI7004G2- - page 67

    Open Boot BIOS 4-17 V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. ok 2 set-topology Topology selected is N_Port Topology has been set Change will take effect after system power cycle ok a set-topology Topology selected is auto Topology has been set Change will take effect after system power cycle Note: Th e system mus ...

  • LSI ITI7004G2- - page 68

    4-18 BIOS F eatures V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. ...

  • LSI ITI7004G2- - page 69

    2 Gbit/s Fibre Channel to PCI Host Adapters A-1 V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. Appendix A Glossary of T erms and Abbre viations 8B/10B A data encoding scheme de veloped b y IBM, translating b yte wide data to an encoded 10-bit f or mat. ANSI American National Standards Institute, the coordinating organi ...

  • LSI ITI7004G2- - page 70

    A-2 Glossar y of T erms and Abbre viations V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. Configuration Ref ers to the wa y a computer is set up; the combined hardware components (computer , monitor , ke yboard, and peripheral de vices) that make up a computer system; or the softw are settings that allow the hardware ...

  • LSI ITI7004G2- - page 71

    Glossar y of T erms and Abbre viations A-3 V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. FC-1 Middle le vel of the FC-PH standard, defining the 8B/10B encoding/decoding and transmission protocol. FC-2 Highest le vel of FC-PH, defining the rules f or signaling protocol and describing transfer of the fr ame, sequence ...

  • LSI ITI7004G2- - page 72

    A-4 Glossar y of T erms and Abbre viations V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. HIPPI High P erformance P arallel Interf ace, an 800 Mbits/s interf ace to supercomputer networks (formerly known as high speed channel) de veloped b y ANSI. Host The computer system in which a SCSI host adapter is installed. It u ...

  • LSI ITI7004G2- - page 73

    Glossar y of T erms and Abbre viations A-5 V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. NL_P ort An N_P or t that contains arbitrated loop functions. Operating System A program that organiz es the inter nal activities of the computer and its peripheral devices . An operating system perf or ms basic tasks such as movi ...

  • LSI ITI7004G2- - page 74

    A-6 Glossar y of T erms and Abbre viations V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. CPU . Inf or mation can be written to and read from RAM. The contents of RAM are lost when the computer is tur ned off . Responder A FC ter m ref erring to the answering de vice. RISC Core LSIFC909 chips contain a RISC (Reduced In ...

  • LSI ITI7004G2- - page 75

    Glossar y of T erms and Abbre viations A-7 V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. data transf er . Synchronous data transf ers are negotiated between the SCSI host adapter and each SCSI de vice. System BIOS Controls the low le vel POST (P ower-On Self-T est), and basic operation of the CPU and computer system. ...

  • LSI ITI7004G2- - page 76

    A-8 Glossar y of T erms and Abbre viations V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. ...

  • LSI ITI7004G2- - page 77

    2 Gbit/s Fibre Channel to PCI Host Adapters V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. Customer Feedbac k W e would appreciate your f eedback on this document. Please cop y the f ollowing page, add y our comments, and fax it to us at the n umber shown. If appropriate, please also f ax copies of any marked-up pages ...

  • LSI ITI7004G2- - page 78

    Customer F eedback V er. 2.0 Copyright © 2002 b y LSI Logic Cor poration. All rights reserved. Reader’ s Comments F ax your comments to: LSI Logic Cor poration T echnical Publications M/S E-198 F ax: 408.433.4333 Please tell us how y ou rate this document: 2 Gbit/s Fibre Channel to PCI Host Adapters User’ s Guide. Place a check mark in the app ...

  • LSI ITI7004G2- - page 79

    ...

  • LSI ITI7004G2- - page 80

    Y ou can find a current list of our U .S. distributors , international distr ibutors , and sales offices and design resource centers on our web site at http://www .lsilogic.com/contacts/na_salesoffices.html ...

Manufacturer LSI Category Network Card

Documents that we receive from a manufacturer of a LSI ITI7004G2- can be divided into several groups. They are, among others:
- LSI technical drawings
- ITI7004G2- manuals
- LSI product data sheets
- information booklets
- or energy labels LSI ITI7004G2-
All of them are important, but the most important information from the point of view of use of the device are in the user manual LSI ITI7004G2-.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals LSI ITI7004G2-, service manual, brief instructions and user manuals LSI ITI7004G2-. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product LSI ITI7004G2-.

Similar manuals

A complete manual for the device LSI ITI7004G2-, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use LSI ITI7004G2- by users. Manuals are usually written by a technical writer, but in a language understandable to all users of LSI ITI7004G2-.

A complete LSI manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual LSI ITI7004G2- - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the LSI ITI7004G2-, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the LSI ITI7004G2-, that we can find in the current document
3. Tips how to use the basic functions of the device LSI ITI7004G2- - which should help us in our first steps of using LSI ITI7004G2-
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with LSI ITI7004G2-
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of LSI ITI7004G2- in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning LSI ITI7004G2-?

Use the form below

If you did not solve your problem by using a manual LSI ITI7004G2-, ask a question using the form below. If a user had a similar problem with LSI ITI7004G2- it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)