English dropdown-ico

Manual Sonance IW-4

16 pages 0.64 mb
Download

Go to site of 16

Summary
  • Sonance IW-4 - page 1

    Instr uction Man ual (ver . IW) IW -1 IW -2 IW -3 IW -4 IW -5 ...

  • Sonance IW-4 - page 2

    2 iPort ver . IW Instr uction Manual Intr oduction The iPort™ In-W all Docking System allows an Apple iPod ® to become part of a whole-home audio system, and/or to be used as a source in a variety of local audio systems. Before installing and using the iPort please r ead and follow all of the instructions in this guide carefully . iP or t System ...

  • Sonance IW-4 - page 3

    3 IW-3 System Box Contents: • (1) iPort In-W all Docking System (with IR control and balanced audio capability) • (1) iPort Balanced Audio W allplate • (1) 15V DC Regulated Power Supply IW-4 System (#70004) Capabilities: • All IW-3 capabilities PLUS: • Allows extensive long-distance RS-232 contr ol of iPod functions with 2-way communicati ...

  • Sonance IW-4 - page 4

    4 iPort ver . IW Instr uction Manual • The iPort has angled screw mounting holes on both sides that allow it to be installed up against a stud. (See Installing The iPort In A Wall , on page 9.) • Direct sunlight can interfer e with IR operation. Avoid installation locations that ar e in direct sunlight a portion of the da y. iP or t Rear -P ane ...

  • Sonance IW-4 - page 5

    5 iPort ver . IW Instr uction Manual iP or t System Connections — IW -1 / IW -2 See Figure 3 IW-1 and IW-2 systems’ unbalanced audio output is designed for use in a local-zone system where the audio equipment is locat- ed less than 2 0 feet fr om the iPort. I n IW-1 systems the iPod is controlled only fr om its front panel; in IW-2 systems the ...

  • Sonance IW-4 - page 6

    iPort ver . IW 3a. If the system includes a #70071 or #70072 line- level volume control, set the iPort’ s V olume Control YES/NO switch to the right ( YES ) position (volume control in system). 3b. Use 5-conductor twin-shielded wire to connect the volume control to the iPort 5-pin connector block. T o avoid noise, connect the wires as shown in Fi ...

  • Sonance IW-4 - page 7

    7 iPort ver . IW Instr uction Manual 7. Use a stereo RCA audio cable to connect the iPort W allplate to a source input on the local-zone audio system. 8. After installing the iPort in the wall (see Installing the iPort in a Wall, page 9), plug the power supply into a wall outlet. iP or t System Connections — IW -3 / IW -4 / IW -5 See Figure 4 IW- ...

  • Sonance IW-4 - page 8

    8 iPort ver . IW Instr uction Manual 3. Set the iPort’ s V olume Control YES/NO switch to the left (NO) position (no volume control in system). • The iPort’ s volume control cir cuit will af fect all zones in a multi-zone system. It is designed for use only in a local-zone system. 4. Plug the audio Cat5 cable’ s RJ-45 connectors into the Au ...

  • Sonance IW-4 - page 9

    iPort ver . IW Instr uction Manual 11. For IW-5 Systems: 11a. Plug the video Cat5 cable’ s RJ-45 connectors into the Video jacks on the iPort and the RJ-45 connector on the Video W allplate, as shown above in Figure 6 . 11b. Install the iPort Video W allplate in an electrical box in the room where the audio equipment is located. Important: Do not ...

  • Sonance IW-4 - page 10

    iPort ver . IW Instr uction Manual • If you ar e unsure about obstructions, drill a small hole in the center of the outline and insert a coat hanger wire into the hole to feel-ar ound for possible obstructions. 5. Cut the opening using a drywall saw . 6. Make all cable connections according to iPort System Connections , above, bringing the wires ...

  • Sonance IW-4 - page 11

    11 iPort ver . IW Instr uction Manual • When switching-back to iPod models with a Dock Connector that are lar ger than 30GB, retract the iPort’ s center disc backwards by rotating it clockwise until you feel the first detent (see Figure 9 ). When these larger models ar e placed in the iPod well the spring-loaded clamps will rotate out of the wa ...

  • Sonance IW-4 - page 12

    12 iPort ver . IW Instr uction Manual iP or t Status Indication The logo on the iPort front panel serves as a status indicator (see Figure 10, on page 12). There ar e 3 illumination levels: BRIGHT , MEDIUM, and DIM. There is also an OFF setting. Factory Default Settings: • When the iPort is first installed, the LED illuminates DIM* for 2 minutes, ...

  • Sonance IW-4 - page 13

    13 iPort ver . IW Instr uction Manual T echnical Assistance and Ser vice If you any have questions about the operation or installation of this product, please call our T echnical Assistance Department at (800) 582-0772 or (949) 492-7777; from 7 a.m. to 5 p.m., Pacific T ime, Monday – Friday . If your iPort should need repair or service, contact y ...

  • Sonance IW-4 - page 14

    14 iPort ver . IW Instr uction Manual W ARRANTY CO VERA GE (U.S. ONL Y) iPort provides the following coverage for units that fail under normal use and accor ding to these instructions due to a defect in workmanship or materials: For units installed inside a residence, iPort will, at its option and at no char ge, repair or r eplace the components of ...

  • Sonance IW-4 - page 15

    15 iPort ver . IW Instr uction Manual ...

  • Sonance IW-4 - page 16

    san clemente ca | 888 . 45 . iPort | www .iportmusic.com 33-3873 05/06 ...

Manufacturer Sonance Category Stereo System

Documents that we receive from a manufacturer of a Sonance IW-4 can be divided into several groups. They are, among others:
- Sonance technical drawings
- IW-4 manuals
- Sonance product data sheets
- information booklets
- or energy labels Sonance IW-4
All of them are important, but the most important information from the point of view of use of the device are in the user manual Sonance IW-4.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Sonance IW-4, service manual, brief instructions and user manuals Sonance IW-4. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Sonance IW-4.

Similar manuals

A complete manual for the device Sonance IW-4, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Sonance IW-4 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Sonance IW-4.

A complete Sonance manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Sonance IW-4 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Sonance IW-4, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Sonance IW-4, that we can find in the current document
3. Tips how to use the basic functions of the device Sonance IW-4 - which should help us in our first steps of using Sonance IW-4
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Sonance IW-4
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Sonance IW-4 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Sonance IW-4?

Use the form below

If you did not solve your problem by using a manual Sonance IW-4, ask a question using the form below. If a user had a similar problem with Sonance IW-4 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)