English dropdown-ico

Manual WatchGuard Technologies XTM 5 Series

21 pages 0.92 mb
Download

Go to site of 21

Summary
  • WatchGuard Technologies XTM 5 Series - page 1

    Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 1 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system XTM 5 Series De-manufacturing Instructions Document Number: 480-2535-001 ...

  • WatchGuard Technologies XTM 5 Series - page 2

    Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 2 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 1.0 Purpose This instruction defines the de-manufacturing process for the recovery of this product family as it pertains to recycli ng of the ...

  • WatchGuard Technologies XTM 5 Series - page 3

    Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 3 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.0 Instruction 3.1 -Remove labels Material removed (part Desc or P/N & material type) Instruction visual Labels Cert. label: 277-2813-00 ...

  • WatchGuard Technologies XTM 5 Series - page 4

    Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 4 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.2 –Remove back screws holding chassis top to chassis bottom and remove top cover. Material removed (part Desc or P/N & material type) ...

  • WatchGuard Technologies XTM 5 Series - page 5

    Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 5 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.3 –Depress memory tabs and remove memory. Memory Module 114-3626-001 – 1GB DDR2 Memory Module, 1 ea. Material removed (part Desc or P/N ...

  • WatchGuard Technologies XTM 5 Series - page 6

    Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 6 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.4 – Unplug power supply cables from motherboard, cut all cable ties, remove power supply screws, and remove power supply. Material remove ...

  • WatchGuard Technologies XTM 5 Series - page 7

    Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 7 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.5 – Remove screws from the power supply. Material removed (P/N & material type) Instruction visual Power Supply 140-3822-001 – Powe ...

  • WatchGuard Technologies XTM 5 Series - page 8

    Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 8 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.6 –Remove the top from the power s upply, remove the cable tie and screw inside the power supply, and remo ve fan from the power supply. ...

  • WatchGuard Technologies XTM 5 Series - page 9

    Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 9 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.7 – Remove labeling from the top lid and the botto m of the power supply. Material removed (P/N & material type) Instruction visual P ...

  • WatchGuard Technologies XTM 5 Series - page 10

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 10 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.8 – Disengage heatsink clamps and remo ve heatsink from motherboard. Material removed (P/N & material type) Instruction visual Heat ...

  • WatchGuard Technologies XTM 5 Series - page 11

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 11 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.9 – Pull back clamp and remove battery. Material removed (P/N & material type) Instruction visual Battery 412-2468-001 – battery, ...

  • WatchGuard Technologies XTM 5 Series - page 12

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 12 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.10 – Remove fan screws from back of chassis. 3.11– Remove screws from fan duct and remove fan duct. Material removed (P/N & mater ...

  • WatchGuard Technologies XTM 5 Series - page 13

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 13 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.12 – Cut cable ties for fans, unplug f ans from motherboard, and remove fans. Material removed (P/N & material type) Instruction vi ...

  • WatchGuard Technologies XTM 5 Series - page 14

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 14 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.13 – Unscrew screws from heatsink and remove heatsink from motherboard. Note that screws cannot be remo ved from the heatsink itself. M ...

  • WatchGuard Technologies XTM 5 Series - page 15

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 15 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.14 – Unlatch CPU from mo therboard and remove CPU. Material removed (P/N & material type) Instruction visual CPU 113-3552-001 – C ...

  • WatchGuard Technologies XTM 5 Series - page 16

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 16 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.15 – Unplug LCD cable from LCD circ uit board and motherboard. Unplug rocker switch cable from mot herboard. Remove LCM cable. Material ...

  • WatchGuard Technologies XTM 5 Series - page 17

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 17 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.16 – Cut cable tie attaching po wer switch cable to chassis. 3.17 – Slide the compact flash ca rd out of the slot and remove. Materia ...

  • WatchGuard Technologies XTM 5 Series - page 18

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 18 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.18 – Remove screws attaching the moth erboard to the chassis and the Cavium card to the chassis. Material removed (P/N & material t ...

  • WatchGuard Technologies XTM 5 Series - page 19

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 19 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.19 – Unplug the Ethernet ports on t he motherboard from the chassis and unplug the Cavium card from the mot herboard. Remove the mother ...

  • WatchGuard Technologies XTM 5 Series - page 20

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 20 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.21 – Use a flat-head screwdriver to disengage the power switch assembly from the chassis. Remove the power switch assembly. Material re ...

  • WatchGuard Technologies XTM 5 Series - page 21

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 21 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.22 – Push tabs on the inside of the bez el to disengage from the chassis. Remove the bezel. A flat-head screwdriver can be useful in th ...

Manufacturer WatchGuard Technologies Category Washer

Documents that we receive from a manufacturer of a WatchGuard Technologies XTM 5 Series can be divided into several groups. They are, among others:
- WatchGuard Technologies technical drawings
- XTM 5 Series manuals
- WatchGuard Technologies product data sheets
- information booklets
- or energy labels WatchGuard Technologies XTM 5 Series
All of them are important, but the most important information from the point of view of use of the device are in the user manual WatchGuard Technologies XTM 5 Series.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals WatchGuard Technologies XTM 5 Series, service manual, brief instructions and user manuals WatchGuard Technologies XTM 5 Series. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product WatchGuard Technologies XTM 5 Series.

Similar manuals

A complete manual for the device WatchGuard Technologies XTM 5 Series, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use WatchGuard Technologies XTM 5 Series by users. Manuals are usually written by a technical writer, but in a language understandable to all users of WatchGuard Technologies XTM 5 Series.

A complete WatchGuard Technologies manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual WatchGuard Technologies XTM 5 Series - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the WatchGuard Technologies XTM 5 Series, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the WatchGuard Technologies XTM 5 Series, that we can find in the current document
3. Tips how to use the basic functions of the device WatchGuard Technologies XTM 5 Series - which should help us in our first steps of using WatchGuard Technologies XTM 5 Series
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with WatchGuard Technologies XTM 5 Series
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of WatchGuard Technologies XTM 5 Series in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning WatchGuard Technologies XTM 5 Series?

Use the form below

If you did not solve your problem by using a manual WatchGuard Technologies XTM 5 Series, ask a question using the form below. If a user had a similar problem with WatchGuard Technologies XTM 5 Series it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)