Documents that we receive from a manufacturer of a Edimax Technology BR-6478Gn can be divided into several groups. They are, among others:
- Edimax Technology technical drawings
- BR-6478Gn manuals
- Edimax Technology product data sheets
- information booklets
- or energy labels Edimax Technology BR-6478Gn
All of them are important, but the most important information from the point of view of use of the device are in the user manual Edimax Technology BR-6478Gn.
- UserManuals.org
- Edimax Technology
- Edimax Technology Network Router
- Edimax Technology BR-6478Gn
Manual Edimax Technology BR-6478Gn
Go to site of 80
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
Summary
-
Edimax Technology BR-6478Gn - page 1
BR-6478Gn User Manual 03-2012 / v1.0 ...
-
Edimax Technology BR-6478Gn - page 2
1 COPYRIGHT Copyright © Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or ? ...
-
Edimax Technology BR-6478Gn - page 3
2 CONTENTS CHAPTER I: PRODUCT INFORMATION ............................................................................................................... 4 1 ‐ 1 Package Contents ......................................................................................................................... ...
-
Edimax Technology BR-6478Gn - page 4
3 3 ‐ 4 ‐ 2 ‐ 3 WPA Pre ‐ Shared Key ................................................................................................... 49 3 ‐ 4 ‐ 2 ‐ 4 WPA RADIUS ................................................................................................................ 50 3 ‐ 4 ...
-
Edimax Technology BR-6478Gn - page 5
4 CHAPTER I: PRODUCT INFORMATION 1 ‐ 1 Package Contents Before you start using this router, please check if there is anything missing in the package, and contact your dealer to claim the missing item(s): ...
-
Edimax Technology BR-6478Gn - page 6
5 Back Panel Item Name Description Antenna connector(s) Connects to the supplied antenna(s) Wi ‐ Fi on/off switch Switches on/off the Wi ‐ Fi signal WPS/Reset Button Resets the router to factory default settings or ...
-
Edimax Technology BR-6478Gn - page 7
6 CHAPTER II: SYSTEM AND NETWORK SETUP 2 ‐ 1 Establishing a Network Connection Please follow the following instructions to build a network connection between your new broadband router, comput ers, and other network d ...
-
Edimax Technology BR-6478Gn - page 8
7 4. Please check all the LEDs on the front panel. The “PWR” and “WAN” LEDs should be on. The “LAN” LED should be on if the computer is connected and correctly powered. If you encounter any ...
-
Edimax Technology BR-6478Gn - page 9
8 2. Select “Obtain an IP address from a DHCP server”, then click “OK”. 2 ‐ 2 ‐ 2 Windows 2000 IP Address Setup 1. Click the “Start” button (it sho uld be located at the lower ‐ left corne ...
-
Edimax Technology BR-6478Gn - page 10
9 “Local Area Connection Properties” window appears, select “Internet Protocol (TCP/IP)”, and then click “Properties”. 2. Select “Obtain an IP address automatically” and “Obtain DNS server address automatically”, ? ...
-
Edimax Technology BR-6478Gn - page 11
10 Connection”. When the “Local Area Connection Properties” window appears, click “Properties”. 2. Select “Obtain an IP address automatically” and “Obtain DNS server address automatically”, then click “OK”. ? ...
-
Edimax Technology BR-6478Gn - page 12
11 select “Properties”. When the “Local Area Connection Properties” window appears, select “Internet Protocol Version 4 (TCP/IPv4)” and then click “Properties”. 2. Select “Obtain an IP address automatically” an ...
-
Edimax Technology BR-6478Gn - page 13
12 2 ‐ 3 Connecting to Broadband Router via Web Browser You can access the broadband router’s web ‐ based configuration interface via any connected computer with a web browser (Internet Explorer 5.x or above, Firefox ...
-
Edimax Technology BR-6478Gn - page 14
13 4. The first page you see after logging in is “Home”. You can see all the current settings and other system information here. System Model Displa ys this broadband router’s model name (useful when ...
-
Edimax Technology BR-6478Gn - page 15
14 Security Displays the security authentication mode of the access point LAN Connection IP Address Displays the IP address of the LAN connection Subnet Mask Displays the subnet mask of the LAN connection DHCP ...
-
Edimax Technology BR-6478Gn - page 16
15 2. Input “cmd”, and then click “OK”. 3. Input “ipconfig”, then press “Enter”. Use the IP address following “Default Gateway” to access this router’s web ‐ based configuration int erface. Please note ...
-
Edimax Technology BR-6478Gn - page 17
16 2. The following will appear. 3. Click “Perform iQ Setup” and it will start detecting your Internet service type. Note: Your computer or iPhone can also use iQ Setup with a Wi ‐ Fi ...
-
Edimax Technology BR-6478Gn - page 18
17 Note: For security reasons, Edimax suggests that you set up the wireless security. If you click “Yes (recommended)”, you will be asked to enter an SSID and a password (at least 8 digits). ...
-
Edimax Technology BR-6478Gn - page 19
18 Note: For security reasons, Edimax suggests that you set up the wireless security. If you click “Setup wireless security (recommended)”, you will be asked to enter an SSID and a password (at least ? ...
-
Edimax Technology BR-6478Gn - page 20
19 2 ‐ 5 Using “iQoS” iQoS is Edimax’s answer to the need for a quick and easy way to manage internet bandwidth. Its intuitive and friendly user interface allows yo u to arrange your bandwidth prior ...
-
Edimax Technology BR-6478Gn - page 21
20 3. Enter your upload and download bandwidth values in the “Total Download Bandwidth” and “Total Upload Bandwidth” fields. Note: Please check with your ISP for details, or conduct a speed test at ...
-
Edimax Technology BR-6478Gn - page 22
21 CHAPTER III: GENERAL SETUP You can perform advan ced configuration of this broadband router in “Genera l Setup”. 1. Click “General Setup” after logging in. 2. All available setup items will appear under ...
-
Edimax Technology BR-6478Gn - page 23
22 You can configure your time zone, password, and remote management settings here. After you have completed the configurations, c lick “Apply” to save the changes. 3 ‐ 1 ‐ 1 Time Zone You can configure ...
-
Edimax Technology BR-6478Gn - page 24
23 Click “Apply” to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click “Continue ” to configure other settings. 3 ‐ 1 ‐ 2 Password ? ...
-
Edimax Technology BR-6478Gn - page 25
24 3 ‐ 1 ‐ 3 Remote Management Setting up the “Remote Management” function allows you to manage this broadba nd router from outside your local area network (from the Internet). Item Name Description Host Ad ...
-
Edimax Technology BR-6478Gn - page 26
25 Select a connection type and proceed with the setup; then click “Apply” to save the changes. If you are not sure which connection type you should use, please contact your Internet service provider fo ...
-
Edimax Technology BR-6478Gn - page 27
26 Item Name Description Host Name Input the host name of your computer here. This is optional and only required if your ISP asks you to do so. MAC Address If your ISP only permits computers with ? ...
-
Edimax Technology BR-6478Gn - page 28
27 Item Name Description Fixed IP Address Input the IP address assigned by your ISP here. Subnet Mask Input the subnet mask assigned by your ISP here. DNS Address 1 and 2 Enter the primary and s ...
-
Edimax Technology BR-6478Gn - page 29
28 Item Name Description User Name Input the user name assigned by your ISP here. Password Input the password assigned by your ISP here. MAC Address If your ISP only permits computers with certain MAC a ...
-
Edimax Technology BR-6478Gn - page 30
29 Idle Time Out Specify the amount of time the router waits before shutting down an idle connection. This option is only available when “Connect on Demand” is selected. Enable Dual ‐ WAN Access Check the “ ...
-
Edimax Technology BR-6478Gn - page 31
30 Item Name Description Host Name Input the host name of your computer here. This is optional and only required if your ISP asks you to do so. MAC Address If your ISP only permits computers with ce ...
-
Edimax Technology BR-6478Gn - page 32
31 Item Name Description User ID Input the user name assigned by your ISP here. Password Input the password assigned by your ISP here. PPTP Gateway Input the PPTP gateway assigned by your ISP here. Connection ? ...
-
Edimax Technology BR-6478Gn - page 33
32 Item Name Description Host Name Input the host name of your computer here. This is optional and only required if your ISP asks you to do so. MAC Address If your ISP only permits computers wit ...
-
Edimax Technology BR-6478Gn - page 34
33 Item Name Description User ID Input the user name assigned by your ISP here. Password Input the password assigned by your ISP here. L2TP Gateway Input the L2TP gateway assigned by your ISP here. MTU ...
-
Edimax Technology BR-6478Gn - page 35
34 3 ‐ 2 ‐ 6 WISP If your Internet service provider is providing you Interne t service wirelessly, select “WISP”. Item Name Description WISP Enable or disable the WISP function. ESSID Input the name of ...
-
Edimax Technology BR-6478Gn - page 36
35 Click “Apply” to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click “Continue ” to configure other settings. 3 ‐ 3 LAN You can c ...
-
Edimax Technology BR-6478Gn - page 37
36 broadband router with less than 30 computers. If you are not sure what to fill, here are some recommended values: z IP Address: “192.168.1.254” z Subnet Mask: “255.255.255.0” z 802.1d Spanning Tree: “Disabled? ...
-
Edimax Technology BR-6478Gn - page 38
37 Item Name Description Enable Static DHCP Leases Check this box to enable the function. MAC Address Input the specified computer ’s MAC address here. IP Address Assign a fixed IP address for the specified ? ...
-
Edimax Technology BR-6478Gn - page 39
38 Click “Apply” to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click “Continue ” to configure other settings. 3 ‐ 4 Wireless You ...
-
Edimax Technology BR-6478Gn - page 40
39 z AP Bridge—WDS: Connects this router wit h up to 4 WDS ‐ capable broadband routers z Universal Repeater: Repeats another wireless access point’s signal to extend its wireless signal coverage 3 ‐ 4 ‐ 1 ‐ 1 AP Mode ? ...
-
Edimax Technology BR-6478Gn - page 41
40 select the channel of your preference (1 to 13). Associated Clients Click “Show Active Clients” for the list of all connected wireless clients. Clic k “Refresh” in the new window to renew the list, and ? ...
-
Edimax Technology BR-6478Gn - page 42
41 Item Name Description Band Select from one of the following options: 2.4GHz (B): Allows 802.11b wireless network clients to connect to this router. 2.4GHz (N): Allows 802.11n wireless network clients to connect ...
-
Edimax Technology BR-6478Gn - page 43
42 3 ‐ 4 ‐ 1 ‐ 3 AP Bridge—Point to Point “AP Bridge—Point to Point” mode connec ts this router to another router and allows all the computers connected to the LAN ports of both routers to communicate wit ...
-
Edimax Technology BR-6478Gn - page 44
43 signal and select “Disable” to turn it off. Click “Apply” to save the changes, or click “Cancel” to discard the changes. After you have clicked “Apply”, you will see the following message: ? ...
-
Edimax Technology BR-6478Gn - page 45
44 to connect to this router. 2.4GHz (N): Allows 802.11n wireless network clients to connect to this router. 2.4GHz (B+G): Allows 802.11b and 802.11g wireless network clients to connect to this rou ter. 2.4GHz ...
-
Edimax Technology BR-6478Gn - page 46
45 Item Name Description Band Select from one of the following options: 2.4GHz (B): Allows 802.11b wireless network clients to connect to this router. 2.4GHz (N): Allows 802.11n wireless network clients to ...
-
Edimax Technology BR-6478Gn - page 47
46 close the window. Note: If you have a pop ‐ up blocker installed, you may have to disable it, or set it to allow the pop ‐ up window to show up. MAC address 1 to 4 Input the MAC addresses ...
-
Edimax Technology BR-6478Gn - page 48
47 Item Name Description Band Select from one of the following options: 2.4GHz (B): Allows 802.11b wireless network clients to connect to this router. 2.4GHz (N): Allows 802.11n wireless network clients to connect ...
-
Edimax Technology BR-6478Gn - page 49
48 Click “Apply” to save the changes, or click “Cancel” to discard the changes. After you have clicked “Apply”, you will see the following message: Click “Apply” to save the changes and restart ...
-
Edimax Technology BR-6478Gn - page 50
49 Item Name Description Key Length Two types of key lengths are available: 64 ‐ bit and 128 ‐ bit. Key Format Two types of key formats are available: ASCII and Hex. The number of characters your encryption key ...
-
Edimax Technology BR-6478Gn - page 51
50 Item Name Description WPA Unicast Cipher Suite Please select a WPA cipher suite supported by your wireless client. Available options are “WPA (TKIP)”, “WPA2 (AES)”, and “WPA2 Mixed”. Pre ‐ Shared Key Format ? ...
-
Edimax Technology BR-6478Gn - page 52
51 RADIUS Server Port Input the RADIUS server port here. Generally, it is “1812”. RADIUS Server Password Input the password of the RADIUS server here. Click “Apply” to save the changes, or click “Cancel? ...
-
Edimax Technology BR-6478Gn - page 53
52 Clear Click “Clear” to remove everything in the MAC address and comment fields. All MAC address entrie s will be listed in the following table: To delete one or more entries, please check the ...
-
Edimax Technology BR-6478Gn - page 54
53 Item Name Description Enable WPS Check this box to enable the WPS function. WPS Status The status of the WPS configuration is displayed her e. Self PIN Code This route r’s WPS PIN code is disp layed he ...
-
Edimax Technology BR-6478Gn - page 55
54 3 ‐ 5 ‐ 1 QoS Quality of Service (QoS) is a means for computers on the network to share Internet bandwidth with guaranteed bandwidth quality fo r each device. Without QoS, all devices on the network ...
-
Edimax Technology BR-6478Gn - page 56
55 Item Name Description Enable QoS Check this box to enable the QoS function. Total Download Bandwidth You can set a limit to the total download bandwidth here. To disable download bandwidth limitatio n, input ...
-
Edimax Technology BR-6478Gn - page 57
56 Protocol Define the protocol type here (TCP or UDP). Add Click the “add” button to add new QoS rules to the table. Reset Click “Reset” to erase all the values you have just entered. Edit Select ? ...
-
Edimax Technology BR-6478Gn - page 58
57 z ZoneEdit ( http://www.zoneedit.com ) z DHIS ( http://www.dhis.org ) z CyberGate ( http://cybergate.planex.co.jp/ddns ) Please go to one of the DDNS service provider’s website and get a DDNS account. After that, you can configure th ...
-
Edimax Technology BR-6478Gn - page 59
58 AuthP/AuthQ Input the AuthP/AuthQ provided by DHIS here. (This field appears only when the authentication type is “QRC”). Click “Apply” to save the changes, or click “Cancel” to discard the changes. ...
-
Edimax Technology BR-6478Gn - page 60
59 ending port number in the righ t field. If only one port number is to be redirected, fill that port number in the left field. Comment You can add an optional note in the “Comment” field. Up to ? ...
-
Edimax Technology BR-6478Gn - page 61
60 local network here. Computer Name Computer names found in the local network are listed here. You can select a computer name and click the “<<” button to add the selected computer’s private IP address ...
-
Edimax Technology BR-6478Gn - page 62
61 Item Name Description Enable Virtual Server Check this box to enable the virtual server function. Private IP Please input the private IP address of the device in the local network here. Computer Name Com ...
-
Edimax Technology BR-6478Gn - page 63
62 3 ‐ 6 ‐ 2 Special Applications Some applications require multiple simultaneous connections, which cannot be set up with simple NAT rules. You can configure the “Special Applications” feature fo r such applications. ...
-
Edimax Technology BR-6478Gn - page 64
63 Click “Apply” to save the changes, or click “Cancel” to discard the changes. After you have clicked “Apply”, you will see the following message: Click “Apply” to save the changes and rest ...
-
Edimax Technology BR-6478Gn - page 65
64 All ALG requiring applications that are compatible with this broadband router is listed here. Check the applications you will be using. Click “Apply” to save the changes, or click “Cancel” to discard ...
-
Edimax Technology BR-6478Gn - page 66
65 Item Name Description Enable Static Routing Check this box to ena ble the function. Destination LAN IP Input the dest ination LAN IP here. Subnet Mask Input the subnet mask of the destination network here. ? ...
-
Edimax Technology BR-6478Gn - page 67
66 3 ‐ 7 ‐ 1 Access Control You can allow or deny computers with certain MAC addresses access to the network. Item Name Description Enable MAC Filtering Check this box to enable MA C address filtering, ...
-
Edimax Technology BR-6478Gn - page 68
67 Item Name Description Client PC Description Input a description for the IP address here. Up to 16 alphanumerical characters are supported. Client PC IP Address Input the starting IP address in the left f ...
-
Edimax Technology BR-6478Gn - page 69
68 Port Range Input the port number(s) here. The port number can be a single value, or a range (e.g. “20 ‐ 50”). If you need to input multiple, no n ‐ contiguous po rt numbers, separate each number with a ? ...
-
Edimax Technology BR-6478Gn - page 70
69 Click “Apply” to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click “Continue ” to configure other settings. 3 ‐ 7 ‐ 3 DoS The ...
-
Edimax Technology BR-6478Gn - page 71
70 Item Name Description Ping of Death Set the threshold for this defense mechanism to be activated here. Check the “Ping of Death” box and input the frequency of the threshold. You can also input t ...
-
Edimax Technology BR-6478Gn - page 72
71 Click “Apply” to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click “Continue ” to configure other settings. 3 ‐ 8 Parental Control ...
-
Edimax Technology BR-6478Gn - page 73
72 Time Start/Time Stop Select the starting/ending time the parental control rule will take effect. Add Click “Add” to add the parental control rule to the list. Reset Click “Reset” to clear all fields. To ...
-
Edimax Technology BR-6478Gn - page 74
73 CHAPTER IV: STATUS, TOOLS & LANGUAGE 4 ‐ 1 Status You can check how your router is currently operating unde r “Status”. 1. Click the “Status” tab. 2. Basic system informa tion will be shown ...
-
Edimax Technology BR-6478Gn - page 75
74 4 ‐ 1 ‐ 3 System Log This page shows all logged system information. You can click “Save” to download the log file to your computer. You can also click “Clear” to remove all logs, or click ...
-
Edimax Technology BR-6478Gn - page 76
75 4 ‐ 1 ‐ 5 Active DHCP Client This page shows all current DHCP clients. You can click “Refresh” to reload the list. 4 ‐ 1 ‐ 6 Statistics This page shows the statistical information of each ...
-
Edimax Technology BR-6478Gn - page 77
76 1. Click the “Tools” tab. 2. You will be able to access the configuration tools, upgrade your firmware, or restart the router here. 4 ‐ 2 ‐ 1 Configuration Tools You can backup and restore ? ...
-
Edimax Technology BR-6478Gn - page 78
77 Restore to Factory Default Click “Reset” to restore the settings to the factory default. A pop ‐ up message window will appear and ask you to confirm the reset. 2. Click “Apply” to save the changes. ? ...
-
Edimax Technology BR-6478Gn - page 79
78 2. Click the “Apply” button to restart the broadband router. 3. When you are prompted to confirm the restart, click “OK”. 4 ‐ 3 Language This broadband router’s web ‐ based user interface supports ...
-
Edimax Technology BR-6478Gn - page 80
79 ...
A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Edimax Technology BR-6478Gn, service manual, brief instructions and user manuals Edimax Technology BR-6478Gn. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Edimax Technology BR-6478Gn.
Similar manuals
A complete manual for the device Edimax Technology BR-6478Gn, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Edimax Technology BR-6478Gn by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Edimax Technology BR-6478Gn.
A complete Edimax Technology manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.
1. Preface and tips on how to use the manual Edimax Technology BR-6478Gn - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Edimax Technology BR-6478Gn, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Edimax Technology BR-6478Gn, that we can find in the current document
3. Tips how to use the basic functions of the device Edimax Technology BR-6478Gn - which should help us in our first steps of using Edimax Technology BR-6478Gn
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Edimax Technology BR-6478Gn
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Edimax Technology BR-6478Gn in a specific country, if it was not possible to solve the problem on our own.
Do you have a question concerning Edimax Technology BR-6478Gn?
Use the form below
If you did not solve your problem by using a manual Edimax Technology BR-6478Gn, ask a question using the form below. If a user had a similar problem with Edimax Technology BR-6478Gn it is likely that he will want to share the way to solve it.